[ 3.8.y.z extended stable ] Patch "USB: mos7840: fix memory leak in open" has been added to staging queue

[Kamal Mostafa]

This is a note to let you know that I have just added a patch titled

    USB: mos7840: fix memory leak in open

to the linux-3.8.y-queue branch of the 3.8.y.z extended stable tree 
which can be found at:

 http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.8.y-queue

This patch is scheduled to be released in version 3.8.13.7.

If you, or anyone else, feels it should not be added to this tree, please 
reply to this email.

For more information about the 3.8.y.z tree, see
https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable

Thanks.
-Kamal

------

>From 65bebb672cc9bd1fe6a609a05348561da2bcbf3d Mon Sep 17 00:00:00 2001
From: Johan Hovold <jhovold at gmail.com>
Date: Mon, 1 Jul 2013 14:03:33 +0200
Subject: USB: mos7840: fix memory leak in open

commit 5f8a2e68b679b41cc8e9b642f2f5aa45dd678641 upstream.

Allocated urbs and buffers were never freed on errors in open.

Signed-off-by: Johan Hovold <jhovold at gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal at canonical.com>
---
 drivers/usb/serial/mos7840.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 54f23f0..06ca54a 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -942,20 +942,20 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Reading Spreg failed\n");
-		return -1;
+		goto err;
 	}
 	Data |= 0x80;
 	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "writing Spreg failed\n");
-		return -1;
+		goto err;
 	}

 	Data &= ~0x80;
 	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "writing Spreg failed\n");
-		return -1;
+		goto err;
 	}
 	/* End of block to be checked */

@@ -964,7 +964,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 									&Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Reading Controlreg failed\n");
-		return -1;
+		goto err;
 	}
 	Data |= 0x08;		/* Driver done bit */
 	Data |= 0x20;		/* rx_disable */
@@ -972,7 +972,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 				mos7840_port->ControlRegOffset, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "writing Controlreg failed\n");
-		return -1;
+		goto err;
 	}
 	/* do register settings here */
 	/* Set all regs to the device default values. */
@@ -983,21 +983,21 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "disabling interrupts failed\n");
-		return -1;
+		goto err;
 	}
 	/* Set FIFO_CONTROL_REGISTER to the default value */
 	Data = 0x00;
 	status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");
-		return -1;
+		goto err;
 	}

 	Data = 0xcf;
 	status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");
-		return -1;
+		goto err;
 	}

 	Data = 0x03;
@@ -1147,6 +1147,15 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	mos7840_port->icount.rx = 0;

 	return 0;
+err:
+	for (j = 0; j < NUM_URBS; ++j) {
+		urb = mos7840_port->write_urb_pool[j];
+		if (!urb)
+			continue;
+		kfree(urb->transfer_buffer);
+		usb_free_urb(urb);
+	}
+	return status;
 }

 /*****************************************************************************
--
1.8.1.2