omap3: Adding vdd_sdi regulator supply to OMAP3EVM

[Tomi Valkeinen]

Hi,

On Thu, 2011-02-17 at 08:11 +0000, Bryan Wu wrote:
> From: Mathieu J. Poirier <mathieu.poirier at canonical.com>
> 
> https://bugs.launchpad.net/bugs/630885
> 
> When booting, the omapdss subsystem is looking for a regulator named
> "vdds_sdi". When the regulator is not found the initialisation sequence
> is aborted resulting in omapfb not finding a display to work with.  This
> patch allows the omapfb sub system to complete its initialisation
> properly and enable LCD display. The problem was fixed by lumping a
> "vdds_sdi" with the already existing "vdds_dsi" regulator. This fix
> takes its root from work done on the Beagle board and the Pandora board.

This isn't a correct fix.

If we would add the sdi regulator to remove the problem we would need to
add the sdi regulator to all boards, not just EVM.

However, I wouldn't go adding them. The proper fix is to make sdi.c only
use the regulator if SDI is actually used. Currently it tries to acquire
it always.

A simple "fix" for this is to disable SDI from Kconfig, presuming you
don't have boards that use SDI interface. N900 is the only board that I
know of which uses SDI.

 Tomi