[Applied] [GIT PULL] mvl-dove branch sync'ed to Marvell Dove LSP 5.3.3 - Lucid

[Eric Miao]

On Fri, Sep 10, 2010 at 6:06 AM, Tim Gardner <tim.gardner at canonical.com> wrote:
> On 09/09/2010 12:24 PM, Brad Figg wrote:
>>
>> On 08/31/2010 06:57 AM, Eric Miao wrote:
>>>
>>> Only those fixing patches are cherry-picked. See
>>>
>>> https://bugs.launchpad.net/ubuntu/+source/linux-mvl-dove/+bug/625132
>>>
>>> Together with my two patches to make galcore.ko and bmm_drv.ko built-in
>>> instead of being module. Reason justified at
>>>
>>> http://bugs.launchpad.net/bugs/625090
>>>
>>> Please review and pull. There is also a identical pull request for
>>> maverick
>>> following this.
>>>
>>> The following changes since commit
>>> 2de7a162a887959f2538a0405e011b58168987d9:
>>> Stefan Bader (1):
>>> UBUNTU: Ubuntu-2.6.32-209.25
>>>
>>> are available in the git repository at:
>>>
>>> git://kernel.ubuntu.com/ycmiao/ubuntu-lucid.git mvl-dove
>>>
>>> Eric Miao (3):
>>> dove: make galcore built-in
>>> dove: make BMM driver built-in
>>> dove: fix incorrect bus base of macro __io()
>>>
>>> Green Wan (1):
>>> fix VGA calibration initial value.
>>>
>>> Marcel Chang (2):
>>> fix jiggling issue for high resolution in dual display.
>>> fix HWC32 enable make system hang while use LCD external clock.
>>>
>>> Peter Liao (3):
>>> Enable L2WA only and remove L1WA
>>> Enable L2C way 4-7
>>> Disable Dual issue of VFP WMMX for stability
>>>
>>> Saeed Bishara (7):
>>> dove: use LCD external clock for videoplug board
>>> dove: fix crash issue when lcd1 enabled and the board setup
>>> doesn't provide mach board info
>>> dove: fix bug when clearing the needed bit when handling PMU interrupt
>>> dove: fix bug when setting the pcie port control register
>>> orion eth: always call the phy_scan from the resume function
>>> dove: set the giga phy address for dove db board
>>> dove: use AC97 RT655 codec instead of ASoC version
>>>
>>> arch/arm/mach-dove/Kconfig | 6 ++++
>>> arch/arm/mach-dove/Makefile | 2 +-
>>> arch/arm/mach-dove/clcd.c | 2 +-
>>> arch/arm/mach-dove/dove-db-setup.c | 5 +---
>>> arch/arm/mach-dove/dove-videoplug-setup.c | 22 ++++++++++++++-
>>> arch/arm/mach-dove/dump_cp15_regs.c | 2 +-
>>> arch/arm/mach-dove/gc600_driver_dove/Makefile | 3 +-
>>> .../gc600_driver_dove/galcore_ko_src/Makefile | 5 ++-
>>> .../galcore_ko_src/hal/os/linux/kernel/Driver.c | 6 ++--
>>> arch/arm/mach-dove/include/mach/io.h | 5 ++-
>>> arch/arm/mach-dove/irq.c | 2 +-
>>> arch/arm/mach-dove/pcie.c | 2 +-
>>> arch/arm/mm/Kconfig | 27 +++++++-----------
>>> arch/arm/mm/proc-macros.S | 6 +---
>>> arch/arm/mm/proc-v7.S | 10 +++----
>>> debian.mvl-dove/config/config.common.ubuntu | 3 +-
>>> drivers/net/mv643xx_eth.c | 11 +++----
>>> drivers/video/marvell/dovefb_base.c | 2 +-
>>> drivers/video/marvell/dovefb_gfx.c | 19 +++++++++++++
>>> include/video/dovefbreg.h | 3 ++
>>> sound/soc/orion/Kconfig | 1 +
>>> sound/soc/orion/dove_db_b.c | 29 +++++++++----------
>>> 22 files changed, 104 insertions(+), 69 deletions(-)
>>
>>
>
> Uploaded Maverick mvl-dove
>

Thanks, all!

> --
> Tim Gardner tim.gardner at canonical.com
>