linux-linaro pull request
Tim Gardner
tim.gardner at canonical.com
Thu Sep 9 04:03:03 UTC 2010
On 09/08/2010 04:22 PM, John Rigby wrote:
> Tim,
>
> These changes only appear huge because I am rebasing against a rebased Ubuntu,
> so all the linux-linaro-2.6.35 changes show up as new.
>
> The following changes since commit 7825dff500c8bc787190037cc40c84178f7576f8:
> Leann Ogasawara (1):
> UBUNTU: Ubuntu-2.6.35-20.29
>
> are available in the git repository at:
>
> git://git.linaro.org/ubuntu/linux-linaro.git linaro
>
>
> Amit Kucheria (2):
> arm: mxc: utilise usecount field in clock operations
> mxc: Fix pad names for imx51
>
> Anand Gadiyar (3):
> OMAP3: wait on IDLEST after enabling USBTLL fclk
> OMAP3630: Add ES1.1 and ES1.2 detection
> omap: 3630: disable TLL SAR on 3630 ES1
>
> Anton Vorontsov (4):
> ARM: cns3xxx: Use IO memory accessors everywhere
> ARM: cns3xxx: Add support for PCI Express ports
> ARM: cns3xxx: Add support for SDHCI controllers
> ARM: cns3xxx: Add support for AHCI controllers
>
> Arnaud Patard (1):
> [ARM] qnap tsx1x: fix section mismatch
>
> Artem Bityutskiy (1):
> omap: device: improve errors handling
>
> Baruch Siach (13):
> mxc_nand: add support for platform defined partitions
> mx25: add platform code for imx-keypad
> mx25pdk: add keypad support
> mx25: add watchdog clock
> mx25pdk: register watchdog device
> mx25: add a comment documenting undocumented IPG clocks
> mx27: add support for the CSI device
> mx25: add support for the CSI device
> mx25: add iomux defines for UART4 on KPP pins
> mx25: add PWM4 to iomux
> arm/imx/gpio: add spinlock protection
> mx2_camera: Add soc_camera support for i.MX25/i.MX27
> mx2_camera: fix type of dma buffer virtual address pointer
>
> Benjamin Herrenschmidt (3):
> net/phy/marvell: Expose IDs and flags in a .h and add dns323
> LEDs setup flag
> [ARM] orion5x: Base support for DNS-323 rev C1
> [ARM] orion5x: Fix soft-reset for some platforms
>
> Benjamin Zores (1):
> [ARM] Kirkwood: update MPP definition.
>
> Benoit Cousson (1):
> OMAP2&3: hwmod: Remove _hwmod prefix in name string
>
> Catalin Marinas (18):
> ARM: Correct the cpu_architecture() function for ARMv7
> smsc911x: Add spinlocks around registers access
> kmemleak: Show more information for objects found by alias
> kmemleak: Add DocBook style comments to kmemleak.c
> kbuild: Warn on selecting symbols with unmet direct dependencies
> ARM: Mark CPU_32v6K as depended on CPU_V7
> ARM: Add support for the MOVW/MOVT relocations in Thumb-2
> ARM: Remove dummy loads from the original relocation address
> ARM: Do not compile the Thumb-2 module relocations on an ARM kernel
> ARM: Allow lazy cache flushing via PG_arch_1 for highmem pages
> ARM: Assume new page cache pages have dirty D-cache
> ARM: Introduce __sync_icache_dcache() for VIPT caches
> ARM: Use lazy cache flushing on ARMv7 SMP systems
> ARM: Remove superfluous flush_kernel_dcache_page()
> ARM: Implement phys_mem_access_prot() to avoid attributes aliasing
> ARM: Improve the L2 cache performance when PL310 is used
> ARM: Remove the domain switching on ARMv6k/v7 CPUs
> ARM: VExpress: Set bit 22 in the PL310 (cache controller) AuxCtlr register
>
> Chris Wilson (1):
> lib/scatterlist: Hook sg_kmalloc into kmemleak (v2)
>
> Christoph Egger (8):
> Replace dead OMAP_MUX_ERRORS with OMAP_MUX_WARNINGS
> Removing dead OMAP_IR
> Removing dead OMAP_DSP
> Removing dead OMAP_STI
> Replacing LEDS_OMAP_DEBUG with OMAP_DEBUG_LEDS
> Removing dead APM
> Removing dead MACH_OMAP_H4_OTG
> Removing dead MACH_OMAP2_H4_USB1
>
> Cory Maccarrone (1):
> omap1: omap7xx clocks, mux, serial fixes
>
> Daniel Mack (2):
> ARM: mx3: pcm037: remove unused variable
> ARM: mx3: mx31lilly: pass mc13783 SPI IRQ pin
>
> Dave Martin (9):
> perf report: Don't abbreviate file paths relative to the cwd
> perf tools: Remove unneeded code for tracking the cwd in perf sessions
> perf tools: Factor out buildid reading and make it implicit in dso__load
> perf tools: remove extra build-id check factored into dso__load
> perf symbols: Improve debug image search when loading symbols
> perf events: Fix mmap offset determination
> perf symbols: work around incorrect ET_EXEC symbol adjustment
> perf symbols: Ignore mapping symbols on ARM
> perf symbols: fix symbol offset breakage with separated debug
>
> David Anders (1):
> omap4: Add OMAP4 Panda Support
>
> Deepak K (1):
> omap2/3/4: serial: errata i202: fix for MDR1 access
>
> Dinh Nguyen (2):
> mx5: Add i2c to Freescale MX51 Babbage HW
> mx5: Register i2c on Freescale MX51 Babbage HW
>
> Dmitry Eremin-Solenikov (2):
> ARM: 6162/1: at91sam9g20ek: add fixed-value regulator for wm8731
> ARM: 6163/1: at91sam9g20ek: add fixed-value regulator for wm8731
>
> Dmytro Milinevskyy (1):
> [ARM] Marvell OpenRD-Ultimate machine support
>
> Eric Bénard (35):
> eukrea_mbimx27-baseboard: fix typo in display name
> eukrea_mbimx27-baseboard: add generic-bl and platform-lcd controls
> eukrea_mbimx27-baseboard: add timings for DVI output
> cpuimx27 and mbimx27: allow fine control of UART4 and SDHC2 usage
> mach-cpuimx27: fix QuadUART's IRQ typo in pins'setup
> eukrea_mbimx27: fix ADS7846 support
> mach-cpuimx27: add USB Host2 and OTG support
> mach-cpuimx27: register wdt and w1_master resources
> mxcmmc: add card detect through DAT3 possibility
> eukrea_mbimx27: use card detect through DAT3 for SDHC1
> MX2X: Add Keypad device definition for MX2X arch
> eukrea_mbimx27: add support for the keyboard
> eukrea_mbimx27: add audio codec
> i.MX35: return IPU clock's value for mx3fb
> mach-cpuimx27: fix USB_ULPI build warnings
> eukrea_mbimx27: fix audio support when SOC is compiled as module
> i.MX27: add suspend to RAM support
> MX25: put define for OTG base address in right include
> plat-mxc/ehci.c: add i.MX25 support
> i.MX25: fix get_rate_otg to return the correct value
> i.MX25: fix EHCI support
> i.MX25: fix USB gadget support
> i.MX25: add AUDMUX and SSI support
> i.MX25: add cpuimx25 module and its baseboard
> i.MX35: add cpuimx35 support and its baseboard
> mxcmmc: convert to pm_ops and enable/disable clock
> imx25: fix low level debug
> imxfb: add pwmr controlled backlight support
> eukrea_mbimx27-baseboard: fix compile when CONFIG_SPI_IMX is disabled
> i.MX51: handle IRQ for gpio 16..31
> iomux-mx51: add 4 pin definitions
> mbimxsd baseboards : remove unnecessary include
> Fix KConfig warning
> eukrea-baseboards: merge includes in one file
> i.MX51: add support for cpuimx51 module and its baseboard
>
> Eric Miao (2):
> ARM: Remove unused PARAMS_PHYS from arch/arm/boot/compressed
> ARM: Auto calculate ZRELADDR and provide option for exceptions
>
> Fabio Estevam (1):
> mx31_3ds: Handle USB OTG GPIO Errors
>
> Felipe Contreras (13):
> omap: mailbox: trivial cleanups
> omap: mailbox: reorganize structures
> omap: mailbox: 2420 should be detected at run-time
> omap: mailbox: use correct config for omap1
> omap: mailbox: update omap1 probing
> omap: mailbox: don't export unecessary symbols
> omap: mailbox: remove unecessary fields
> omap: mailbox: add IRQ names
> omap: mailbox: reorganize registering
> omap: mailbox: simplify omap_mbox_register()
> omap: mailbox: only compile for configured archs
> omap: mailbox: standarize on 'omap-mailbox'
> omap: mailbox: reorganize headers
>
> Fernando Guzman Lugo (4):
> Mailbox: free mailbox interrupt before freeing blk queue
> Mailbox: flush pending deferred works before freeing blk queue
> Mailbox: Check valid registered callback before calling
> Mailbox: disable mailbox interrupt when request queue
>
> Govindraj R (1):
> omap3: serial: Add context save and restore for mcr
>
> Grazvydas Ignotas (3):
> omap3: pandora: update gpio-keys data
> omap3: pandora: add NAND and wifi support
> omap: mux: fix multipath gpio handling
>
> Harro Haan (1):
> ARM: 5967/1: at91_udc.c use spinlocks instead of local_irq_xxx
>
> Hartley Sweeten (3):
> ARM: 6167/1: ep93xx: register backlight driver
> ARM: 6168/1: ep93xx: move physmap flash registration into core.c
> ARM: 6174/1: ep93xx: clear devcfg bits before setting them
>
> Helge Deller (1):
> PARISC: led.c - fix potential stack overflow in led_proc_write()
>
> Hemanth V (1):
> OMAP4: Add GPIO LED support for SDP board
>
> Hiroshi DOYU (6):
> omap iommu: Introduce iopgd_is_table MACRO
> omap iommu: Rename iopte_[p,v]addr -> iopte_page_[p,v]addr
> omap iommu: move iommu_disable at fault to the above layer
> omap iommu: Make omap-iommu.o built-in
> Mailbox: new mutext lock for h/w mailbox configuration
> omap mailbox: Set a device in logical mbox instance for traceability
>
> Jarkko Nikula (4):
> omap: rx51: Set regulator V28 always on
> omap: rx51: Add platform_data for tlv320aic3x with reset gpionumber
> omap: rx51: Use REGULATOR_SUPPLY macro when
> initializingregulator consumers
> omap: rx51: Add supply and data for the tpa6130a2 headphoneamplifier
>
> Jason Baron (1):
> kmemleak: Introduce a default off mode for kmemleak
>
> Jason Wang (10):
> mx51/iomux: Fix mux mode and input path for two pads
> mx51/iomux: add UART and GPIO pad definitions for imx51_3ds board
> mxc/iomux: add GPIO bank offset for iomux v3 platforms
> mxc: add common debug board for 3-stack platforms
> mx31_3ds: revert 3ds debug board relate code
> mx51_3ds: Add support for the imx51 3-stack board
> mx51: add imx_keypad device definition for mx51 platforms
> mx51_3ds: add keypad support on 3ds platform
> imx: move gpio init after to irq init
> omap: Fix DEBUG_LL uart to access phys addr when MMU isn't enable
>
> John Rigby (26):
> omap3 nand: fix missing gpmc_prefetch_reset param
> Merge branch 'linux-linaro-2.6.35-8Sep2010' and Ubuntu-2.6.35-20.29
> LINARO: Add debian.linaro packaging
> LINARO: select debian.linaro packaging
> LINARO: [Config] Update configs for new upstream
> LINARO: Start new release
> LINARO: Linaro-2.6.35-1001-5
> LINARO: [Config] Fix vexpress config
> LINARO: [Config] Add mx51 flavour
> LINARO: Start new release
> LINARO: [config] Update vexpress config
> LINARO: Linaro-2.6.35-1003.7
> LINARO: Start new release
> LINARO: rebase on linux-linaro-2.6.35 and Ubuntu-2.6.35-19.25 merge
> LINARO: [Config] Update configs
> LINARO: Bump ABI
> LINARO: Linaro-2.6.35-1004.8
> LINARO: Start new release
> LINARO: Linaro-2.6.35-1004.9
> LINARO: Start new release
> LINARO: rebase on linux-linaro-2.6.35 and Ubuntu-2.6.35-20.29 merge
> LINARO: [Config] Turn on CONFIG_HIGHMEM for vexpress
> LINARO: Update Vcs-Git
> LINARO: add Recommends uboot-mkimage
> LINARO: Bump ABI
> LINARO: Linaro-2.6.35.1005.10
>
> Kan-Ru Chen (5):
> OMAP2: Devkit8000: Enable DVI-D output
> OMAP2: Devkit8000: Setup LCD reset
> omap: Add new interface omap_get_die_id
> omap: Use omap_get_die_id() to get the DIE ids
> omap: Devkit8000: Use DIE id to initialize dm9000 MAC address
>
> Kanigeri, Hari (3):
> omap iommu: update irq mask to be specific about twl and tlb
> omap iommu: add functionality to get TLB miss interrupt
> omap iommu: update ducati mmu irq define name
>
> Kevin Hilman (8):
> OMAP24xx: CM: fix mask used for checking IDLEST status
> OMAP2/3: hwmod: L3 and L4 CORE/PER/WKUP hwmods don't have IDLEST
> OMAP: hwmod: add non-locking versions of enable and idle functions
> OMAP: omap_device: ensure hwmod tracks attached omap_device pointer
> OMAP: PM: create omap_devices for MPU, DSP, L3
> OMAP: hwmod data: add class for IVA hwmods
> OMAP2&3: hwmod: Replace l3 -> l3_main
> OMAP3: hwmod data: add data for OMAP3 IVA2
>
> Kevin Wells (11):
> ARM: LPC32XX: Initial arch header files
> ARM: LPC32XX: Debug and IRQ macros
> ARM: LPC32XX: Clock driver
> ARM: LPC32XX: GPIO, timer, and IRQ drivers
> ARM: LPC32XX: System suspend support
> ARM: LPC32XX: Serial support code
> ARM: LPC32XX: Misc support functions
> ARM: LPC32XX: Phytec 3250 platform support
> ARM: LPC32XX: Arch config menu supoport and makefiles
> ARM: Add support for the LPC32XX arch
> Merge branch 'test' of ../test/linux-2.6-lpc2 into wells/lpc32xx-arch_v2
>
> Kirill A. Shutemov (5):
> ARM: 6252/1: Use SIGBUS for unaligned access instead of SIGILL
> ARM: 6269/1: Add 'code' parameter for hook_fault_code()
> ARM: 6255/1: Workaround infinity loop in handling of translation faults
> ARM: 6256/1: Check arch version and modify fsr_info[] depends on
> it at runtime
> ARM: 6268/1: ARMv6K and ARMv7 use fault statuses 3 and 6 as
> Access Flag fault
>
> Leif Lindholm (1):
> ARM: Add SWP/SWPB emulation for ARMv7 processors (v5)
>
> Linus Torvalds (1):
> Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
>
> Linus Walleij (17):
> ARM: 6153/1: nomadik MTU to use dynamic shift and mult assignment
> ARM: 6204/1: Fixups for the RealView PB1176
> ARM: 6227/1: PL022 SSP platform data for the RealViews
> ARM: 6228/1: PL022 SSP platform data for the Versatile
> ARM: 6222/1: add memory types for the TCMs
> ARM: 6223/1: support multiple TCM banks
> ARM: 6224/1: print TCM whereabouts in init message
> ARM: 6215/2: add character LCD platform data for RealView and Versatile
> ARM: 6234/1: move SPEAr to use common mult/shift calculation code
> ARM: 6159/1: Move IOP to use common mult/shift calculation code
> ARM: 6214/2: driver for the character LCD found in ARM refdesigns
> ARM: 6235/2: driver for the LEDs found in the later ARM refdesigns
> ARM: 6264/1: fix Versatile Express LED oversight
> ARM: 6225/1: make TCM allocation static and common for all archs
> ARM: 6157/2: PL011 TX/RX split of LCR for ST-Ericssons derivative
> ARM: 6158/2: PL011 baudrate extension for ST-Ericssons derivative
> ARM: 6278/2: fix regression in RealView after the introduction of pclk
>
> Luotao Fu (2):
> pca100: add framebuffer device support and TFT
> pca100: clean up GPIO pin multiplexing
>
> Magnus Damm (3):
> ARM: 6206/1: CONFIG_FORCE_MAX_ZONEORDER update for SH-Mobile ARM
> ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY
> ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128
>
> Marc Kleine-Budde (5):
> mx25: add flexcan address and interrupt definition
> mx35: adjust flexcan clock definition
> mx35: add flexcan address
> imx: dynamically register flexcan devices for mx25 and mx35
> pcm043: register flexcan device
>
> Martin Michlmayr (6):
> [ARM] Kirkwood: Export GPIO indicating jumper setting of JP1
> [ARM] Kirkwood: Fix explanation of MPP45 for QNAP TS41x
> [ARM] orion5x: Set links to solid on D-Link DNS-323
> [ARM] Kirkwood: Add MPP44 (board ID) on TS-219
> [ARM] Kirkwood: Add support for HP t5325 Thin Client
> [ARM] Orion: DNS-323 C1 requires phylib
>
> Mathias Nyman (1):
> omap: tsl2563 ALS support for Nokia N900
>
> Michael Bohan (1):
> arm: mm: Don't free prohibited memmap entries
>
> Michal Marek (1):
> ARM: 6328/1: Build with -fno-dwarf2-cfi-asm
>
> Mika Westerberg (6):
> ARM: 6116/1: kdump: reserve memory for crashkernel
> ARM: 6117/1: kdump: implement crash_setup_regs()
> ARM: 6118/1: kdump: implement machine_crash_shutdown()
> ARM: 6119/1: kdump: skip indirection page when crashing
> ARM: 6120/1: kdump: implement copy_oldmem_page()
> ARM: 6122/1: kdump: add support for elfcorehdr parameter
>
> Mikael Pettersson (1):
> ARM: 6329/1: wire up sys_accept4() on ARM
>
> Mike Rapoport (2):
> omap3: introduce omap3_map_io
> OMAP: DSS2: OMAPFB: use phys_to_virt for RAM mappings
>
> Nicolas Ferre (2):
> ARM: 6169/1: AT91: add new at91 chips in at91sam9g45 family
> ARM: 6185/1: AT91: PM: dual ram controller support
>
> Nicolas Pitre (19):
> [ARM] implement arch_randomize_brk()
> [ARM] add address randomization to mmap()
> ARM: initial stack protector (-fstack-protector) support
> ARM: stack protector: change the canary value per task
> [ARM] Kirkwood: fix HP t5325 after commit 6605742f2a
> [ARM] Kirkwood: more factorization of the PCIe init code
> [ARM] Kirkwood: add missing machine targets to defconfig
> Merge commit '7b70c4275f'
> Merge remote branch 'catalin/stable-2.6.35'
> Merge remote branch 'willd/for-linaro'
> Merge commit 'd21872b'
> Merge commit 'linaro_merge_100811'; commit 'v2.6.35.2' into
> linaro_stable_10.11
> Revert "perf symbols: work around incorrect ET_EXEC symbol adjustment"
> Merge remote branch 'remotes/willd/perf-tools' into linaro_stable_10.11
> ARM: fix ASLR of PIE executables
> Merge commit 'v2.6.35.3' into linaro_stable_10.11
> Merge commit 'v2.6.35.4' into linaro-2.6.35
> ARM: link board specific files after core files
> Merge remote branch 'willd/for-linaro-stable' into linaro-2.6.35
>
> Nishanth Menon (4):
> omap2/3/4: serial: remove initialization sparse warnings
> omap2/3/4: serial: kill dev_attr_sleep_timeout sparse warn
> omap2/3/4: serial: introduce errata handling
> omap2/3: id: fix sparse warning
>
> Ohad Ben-Cohen (6):
> omap: zoom2: wlan board muxing
> omap: zoom3: wlan board muxing
> omap: mailbox: convert rwlocks to spinlock
> omap: mailbox cleanup: split MODULE_AUTHOR line
> omap: mailbox: remove (un)likely macros from cold paths
> omap: mailbox: convert block api to kfifo
>
> Olaf Rempel (1):
> [ARM] orion/kirkwood: reset PCIe unit on boot
>
> Paul Walmsley (9):
> OMAP: clock: add kerneldoc for structures; move flags closer to structs
> OMAP1: OPP: add KConfig entry for 96MHz ARM rate (using a 12MHz
> oscillator)
> OMAP1: clock: some cleanup
> OMAP: hwmod: allow omap_hwmod_late_init() caller to skip module
> idle in _setup()
> OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods
> OMAP: hwmod/device: add omap_{device,hwmod}_get_mpu_rt_va
> OMAP2+: hwmod/device: update documentation and copyright
> OMAP: PM constraints: add return values; add requesting device
> param to omap_pm_set_max_dev_wakeup_lat()
> OMAP: PM constraints: add omap_pm_set_min_clk_rate()
>
> Pavel Machek (1):
> Add GPIO support for HTC Dream.
>
> Rabin Vincent (24):
> ARM: 6150/1: gic: implement set_type
> ARM: 6147/1: nomadik-gpio: set val in ->direction_output()
> ARM: 6148/1: nomadik-gpio: add function to configure pullup/pulldown
> ARM: 6149/1: nomadik-gpio: add function to configure sleep mode behaviour
> ARM: 6154/1: nomadik-gpio: refactor nmk_gpio_set_mode
> ARM: 6155/1: nomadik-gpio: add pin configuration API
> ARM: 6156/1: nomadik-gpio: switch to core_initcall
> ARM: 6175/1: nomadik-gpio: implement set_wake
> ARM: 6176/1: nomadik-gpio: implement to_irq
> ARM: 6177/1: nomadik-gpio: fix "ignoring return value" warning
> ARM: 6161/1: mop500: add basic pin configuration
> ARM: 6160/1: ux500: add DB8500 pin configs
> ARM: 6266/1: ux500: add separate irq lists for DB8500 and DB5500
> ARM: 6267/1: mop500: add AB8500 interrupt support
> ARM: 6237/1: mmci: use sg_miter API to fix multi-page sg handling
> ARM: 6238/1: mmci: fix multi block transfers
> ARM: 6239/1: mmci: let core poll for card detection
> ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback
> ARM: 6244/1: mmci: add variant data and default MCICLOCK support
> ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants
> ARM: 6246/1: mmci: support larger MMCIDATALENGTH register
> ARM: 6287/1: ftrace: clean up mcount assembly indentation
> ARM: 6288/1: ftrace: document mcount formats
> ARM: 6286/1: fix Thumb-2 decompressor broken by "Auto calculate ZRELADDR"
>
> Rajendra Nayak (2):
> OMAP4: hwmod: Enable omap_device build for OMAP4
> omap4: suspend: Add basic system suspend support
>
> Robert Nelson (3):
> ARM: OMAP: Beagle: revision detection
> ARM: OMAP: Beagle: only Cx boards use pin 23 for write protect
> ARM: OMAP: Beagle: no gpio_wp pin connection on xM
>
> Rogerio Pimentel (1):
> mx27_3ds: add support for the keypad
>
> Russell King (39):
> ARM: Prohibit ioremap() on kernel managed RAM
> ARM: Remove support for LinkUp Systems L7200 SDP.
> Merge git://git.linaro.org/nico/arm_security into devel-stable
> ARM: Precalculate vmalloc_min
> ARM: Remove DISCONTIGMEM support
> ARM: Remove 'node' argument form arch_adjust_zones()
> ARM: Move platform memory reservations out of generic code
> ARM: OMAP: Cleanup OMAP FB SDRAM reservation
> ARM: OMAP: Convert to use ->reserve method to reserve boot time memory
> ARM: early_alloc()
> Merge branch 'l7200' into devel
> Merge git://git.kernel.org/.../nico/orion into devel-stable
> ARM: AMBA: Add pclk definition for platforms using primecells
> Merge branch 'master' of
> git://git.infradead.org/users/cbou/linux-cns3xxx into devel-stable
> ARM: fix build warning in asm/elf.h
> ARM: early_pte_alloc()
> ARM: initial LMB trial
> ARM: Convert platform reservations to use LMB rather than bootmem
> ARM: OMAP: Convert OMAPFB and VRAM SDRAM reservation to LMB
> ARM: LMB: Convert arm_memory_present() to use LMB memory information
> ARM: LMB: convert pfn_valid to use LMB
> ARM: Remove unnecessary call to find_limits()
> ARM: Versatile: fix section mismatch
> Merge branch 'origin' into misc
> ARM: use generic ioremap_page_range()
> ARM: DMA coherent allocator: align remapped addresses
> ARM: Factor out common code from cpu_proc_fin()
> ARM: SMP: Always enable clock event broadcast support
> ARM: call machine_shutdown() from machine_halt(), etc
> ARM: Fix section build warnings for AMBA drivers
> Merge branch 'wells/lpc32xx-arch_v2' of
> git://git.lpclinux.com/linux-2.6-lpc into devel-stable
> Merge branch 'for-rmk' of
> git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable
> Merge branch 'arm/booting' of
> git://git.pengutronix.de/git/ukl/linux-2.6 into devel-stable
> ARM: AMBA: Add pclk support to AMBA bus infrastructure
> Merge branch 'shmobile' into devel
> Merge branches 'at91', 'ep93xx', 'kexec', 'iop', 'lmb',
> 'nomadik', 'nuc', 'pl', 'spear' and 'versatile' into devel
> Merge branch 'misc' into devel
> Merge branch 'devel-stable' into devel
> ARM: Tighten check for allowable CPSR values
>
> Ryan Mallon (3):
> ARM: 6200/1: AT91: Define NR_BUILTIN_GPIO
> ARM: 6209/2: at91: Add support for Bluewater Systems Snapper
> 9260/9G20 modules
> ARM: 6209/3: at91_udc: Add vbus polarity and polling mode
>
> Saeed Bishara (6):
> [ARM] Kirkwood: configure NAND mpp's for db88f6281
> [ARM] Kirkwood: add support for rev A1 of the 88f6192 and 88f6180 chips.
> [ARM] Kirkwood: Add support for 88f6282
> [ARM] PCI: add platform private data to pci_sys_data
> [ARM] Kirkwood: add support for PCIe1
> [ARM] Dove: platform device registration for the sdio interfaces
>
> Samu Onkalo (1):
> omap: dma: Support for prefetch in destination synchronizedtransfer
>
> Santosh Shilimkar (3):
> omap4: mmc: Fix the regulator resource for MMC2 on 4430sdp
> omap4: Add smc API to read AuxCoreBoot0 register
> omap4: hotplug: Add basic CPU hotplug support
>
> Sascha Hauer (2):
> mxc_nand: Fix OOB handling
> mx25: flexcan clock support
>
> Sergio Aguirre (1):
> omap3: Unify omap2_set_globals_3[43,6x]x functions
>
> Shubhrajyoti Datta (1):
> omap4: Board changes for 4430sdp tmp105 temperature sensor
>
> Simon Guinot (3):
> [ARM] Kirkwood: add LaCie Network Space Max v2 support
> leds: add LED driver for Network Space v2 LEDs
> [ARM] Kirkwood: update LED support for Network Space v2
>
> Steve Sakoman (1):
> omap: Overo: Fix support for second ethernet port
>
> Sukumar Ghorai (8):
> omap3 gpmc: functionality enhancement
> omap3 nand: cleanup virtual address usages
> omap3 nand: fix issue in board file to detect nand
> omap3 flash: rename board-sdp-flash.c to be use by other boards
> omap3: add support for NAND on zoom2 board
> omap3: add support for NAND on zoom3 board
> omap-3630-sdp : Add support for Flash
> omap3: add support for NAND on LDP board
>
> Thomas Weber (10):
> OMAP2: Devkit8000: Cleanup for power supplies
> OMAP2: Devkit8000: change panel to generic panel
> OMAP2: Devkit8000: Remove unneeded VDVI supply
> OMAP2: Devkit8000: Remove non existing vsim supply
> OMAP2: Devkit8000: Remove en-/disable for tv panel
> OMAP2: Devkit8000: Using the REGULATOR_SUPPLY macro
> OMAP2: Devkit8000: Using gpio_is_valid macro
> OMAP2: Devkit8000: Remove unused omap_board_config
> OMAP2: Devkit8000: Fix regulator for power supply
> OMAP2: powerdomain: Add break in switch statement
>
> Tim Gardner (5):
> UBUNTU: [Config] Find ABI files according to their source package name
> UBUNTU: [Config] getabi: Only get armel omap and vexpress
> UBUNTU: Bump ABI
> UBUNTU: [Config] Changed flavour names from {omap,vexpress} to
> linaro-{omap,vexpress}
> UBUNTU: Linaro-2.6.35-1002.6
>
> Tony Lindgren (36):
> Merge branch 'v2.6.35-rc3-iommu-for-next' of
> git://gitorious.org/~doyu/lk/mainline into omap-for-linus
> omap: Separate out omap2 FS USB platform init functions
> omap: Move omap2 FS USB platform init code into mach-omap2/usb-fs.c
> omap: Enable interface clock for omap2 FS USB
> omap: Move omap1 USB platform init code into mach-omap1/usb.c
> omap: mux: Fix omap_mux_init_gpio for omap24xx
> omap: mux: Renumber package defines to make room for older 24xx packages
> omap: mux: Allow compiling in new mux code on all mach-omap2 systems
> omap: mux: Remove unncessary parens from mux34xx.c
> omap: mux: Add data for 2420
> omap: mux: Add data for 2430
> omap: mux: Select SIP package for H4
> omap: mux: Select POP package for Apollon
> omap: mux: Select POP package for N8X0
> omap: mux: Select POP package for 2430SDP
> omap: mux: Make omap2 FS USB code use new mux functions
> omap: mux: Do keypad muxing in board-*.c files
> omap: mux: Mux Apollon LCD power in board-apollon.c
> omap: mux: Mux 2430 USB0HS_STP in board-2430.c
> omap: mux: Convert 2420 platform init code to use new mux code
> omap: mux: Remove old mux code
> ARM: Disable VGA console for ARM in most cases
> omap: Use 32KiHZ timer by default
> omap: Make omap specific features appear under Kconfig menu
> omap2/3/4: Move Kconfig options to mach-omap2/Kconfig
> omap2/3/4: Select all omaps and boards by default
> omap2/3/4: Add Kconfig option to compile in typical omap features
> ARM: 6203/1: Make VFPv3 usable on ARMv6
> ARM: 6207/1: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check
> for it on V6
> omap: Add back UART MDR1 check into uncompress.h
> omap2: Fix GPIO numbers and smc91x for 2430sdp
> Merge branch 'devel-misc' into omap-for-linus
> Merge branch 'for_2.6.36' of git://git.pwsan.com/linux-2.6 into
> omap-for-linus
> Merge branch 'devel-map-io' into omap-for-linus
> Merge branch 'v2.6.35-omap-mailbox-for-next' of
> git://gitorious.org/~doyu/lk/mainline into omap-for-linus
> arm: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check for it on V6
>
> Uwe Kleine-König (69):
> ARM: mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its
> arch number
> ARM: mx25: rename mach-mx25pdk.c to mach-mx25_3ds.c matching its
> arch number
> ARM: zImage: don't hard code the stack size twice
> ARM: zImage: some comments for __armv3_mpu_cache_on
> ARM: zImage: __armv3_mpu_cache_flush: respect should-be-zero specification
> ARM: zImage: fix comments for cache_on, cache_off and cache_clean_flush
> ARM: zImage: annotate debug functions about corrupted registers
> ARM: mx1: don't use deprecated symbol names
> ARM: mx1/scb9328: fix type of uart1_mxc_exit to make compiler happy
> ARM: mx2/mx27_3ds: document alternative names and remove empty header
> ARM: imx: remove empty and unused board headers
> ARM: mx3/kzm_arm11_01: fold board header in its only user
> ARM: mx2/mx21ads: fold board header in its only user
> ARM: mx2/mx27ads: fold board header in its only user
> ARM: mx3/qong: get rid of nearly empty header
> ARM: mx3/mx31_3ds: fold board header in its only user
> ARM: mx3/mx31ads: fold board header in its only user
> ARM: mxc: grammar fix
> ARM: imx: rename mach dir for mx21 and mx27 to mach-imx
> ARM: imx/mx1: fold crm_regs.h into its only consumer
> ARM: imx: get rid of mxc_gpio_init
> ARM: imx: fold serial.c into devices.c
> ARM: imx1: rename imx_csi_device to match its .name
> ARM: imx1: rename imx_i2c_device to follow a common naming scheme
> ARM: imx1: rename imx_uart[12]_device to follow a common naming scheme
> ARM: imx: rename mxc_uart_devicex to follow a common naming scheme
> ARM: imx: move mx1 support to mach-imx
> ARM: imx: Kconfig: use an if block instead of a depend for many symbols
> ARM: imx: prepare deprecating ARCH_MX1, MACH_MX2, MACH_MX21 and MACH_MX27
> ARM: imx: new Kconfig symbol and feature test macro for DMA on mx1 and mx2
> ARM: imx: new helper function imx_add_platform_device
> MTD: mxc_nand: make bit fields unsigned to please sparse
> ARM: imx: remove paragraphs with old address of the FSF
> ARM: mx25: remove paragraphs with old address of the FSF
> ARM: mx3: remove paragraphs with old address of the FSF
> ARM: mxc91231: remove paragraphs with old address of the FSF
> ARM: mxc: remove paragraphs with old address of the FSF
> ARM: imx: Change the way nand devices are registered (generic part)
> ARM: imx: Change the way nand devices are registered (imx21)
> ARM: imx: Change the way nand devices are registered (imx25)
> ARM: imx: Change the way nand devices are registered (imx27)
> ARM: imx: Change the way nand devices are registered (imx31)
> ARM: imx: Change the way nand devices are registered (imx35)
> ARM: imx: dynamically register imx-i2c devices (generic part)
> ARM: imx: dynamically register imx-i2c devices (imx1)
> ARM: imx: dynamically register imx-i2c devices (imx21)
> ARM: imx: dynamically register imx-i2c devices (imx25)
> ARM: imx: dynamically register imx-i2c devices (imx27)
> ARM: imx: dynamically register imx-i2c devices (imx31)
> ARM: imx: dynamically register imx-i2c devices (imx35)
> ARM: imx: dynamically register spi_imx devices (generic part)
> ARM: imx: dynamically register spi_imx devices (imx21)
> ARM: imx: dynamically register spi_imx devices (imx25)
> ARM: imx: dynamically register spi_imx devices (imx27)
> ARM: imx: dynamically register spi_imx devices (imx31)
> ARM: imx: dynamically register spi_imx devices (imx35)
> ARM: imx: dynamically register imx-uart devices (generic part)
> ARM: imx: dynamically register imx-uart devices (imx1)
> ARM: imx: dynamically register imx-uart devices (imx21)
> ARM: imx: dynamically register imx-uart devices (imx25)
> ARM: imx: dynamically register imx-uart devices (imx27)
> ARM: imx: dynamically register imx-uart devices (imx31)
> ARM: imx: dynamically register imx-uart devices (imx35)
> ARM: mx3: complement uart init routine with an exit routine
> ARM: remove bit-rotten STANDALONE_DEBUG for decompressor
> ARM: zImage: don't define unused symbol initrd_phys
> ARM: deprecate support for old way to pass kernel parameters
> Merge branch 'imx/for-2.6.36' of
> git://git.pengutronix.de/git/ukl/linux-2.6 into HEAD
> mmc: build fix: mmc_pm_notify is only available with CONFIG_PM=y
>
> Vincent Sanders (1):
> Remove ARM default configurations which duplicate omap3_defconfig
>
> Will Deacon (18):
> ARM: 6218/1: Versatile Express: add support for local timers on
> CA9X4 daughterboard
> ARM: 6198/1: perf probe: Add ARM DWARF register number mappings
> ARM: 6199/1: Add kprobe-based event tracer
> ARM: 6213/1: atomic64_test: add ARM as supported architecture
> Versatile Express: add support for local timers on CA9X4 daughterboard
> ARM: Add kprobe-based event tracer
> ARM: perf probe: Add ARM DWARF register number mappings
> ARM: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a
> faulty ASID
> ARM: flush_ptrace_access: invalidate all I-caches
> ARM: atomic64_test: add ARM as supported architecture
> Merge branches 'atomic-fixes', 'misc-patches', 'perf-probe' and
> 'sw-breakpoint' into for-linaro
> Merge branch 'perf-tools' into for-linaro
> ARM: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a
> faulty ASID
> ARM: flush_ptrace_access: invalidate all I-caches
> oprofile: don't call arch exit code from init code on failure
> ARM: oprofile: fix and simplify init/exit functions
> ARM: perf: reword comments relating to perf_event_do_pending
> ARM: perf: fix event validation
>
> Wolfram Sang (1):
> pcm037/pcm043/pca100: fix ULPI-related build warnings
>
> eric miao (2):
> ARM: 6197/2: preliminary support for sparse IRQ
> ARM: 6251/1: Make SPARSE_IRQ a hidden option
>
> stanley.miao (1):
> OMAP3: AM3505/3517 do not have IO wakeup capability
>
> wanzongshun (5):
> ARM: 6231/1: re-organize the nuc900 lcd arch platform data setting
> ARM: 6232/1: add nuc900 keypad arch platform data
> ARM: 6249/1: add nuc900 kpi platform_device structure to nuc910_dev
> ARM: 6250/1: patch for modifying spi flash configuration
> ARM: 6274/1: add global control registers definition header file
> for nuc900
>
> Documentation/arm/00-INDEX | 2 +
> Documentation/arm/memory.txt | 8 +-
> Documentation/arm/swp_emulation | 27 +
> Documentation/arm/tcm.txt | 30 +-
> arch/arm/Kconfig | 193 +-
> arch/arm/Makefile | 16 +-
> arch/arm/boot/Makefile | 8 +-
> arch/arm/boot/compressed/Makefile | 15 +-
> arch/arm/boot/compressed/Makefile.debug | 23 -
> arch/arm/boot/compressed/head-l7200.S | 29 -
> arch/arm/boot/compressed/head.S | 41 +-
> arch/arm/boot/compressed/misc.c | 20 -
> arch/arm/common/gic.c | 46 +
> arch/arm/common/sa1111.c | 5 +-
> arch/arm/configs/am3517_evm_defconfig | 127 -
> arch/arm/configs/cm_t35_defconfig | 157 -
> arch/arm/configs/devkit8000_defconfig | 184 -
> arch/arm/configs/igep0020_defconfig | 179 -
> arch/arm/configs/kirkwood_defconfig | 8 +
> arch/arm/configs/lusl7200_defconfig | 23 -
> arch/arm/configs/omap3_beagle_defconfig | 134 -
> arch/arm/configs/omap3_evm_defconfig | 160 -
> arch/arm/configs/omap3_pandora_defconfig | 158 -
> arch/arm/configs/omap3_stalker_lks_defconfig | 150 -
> arch/arm/configs/omap3_touchbook_defconfig | 621 --
> arch/arm/configs/omap_2430sdp_defconfig | 136 -
> arch/arm/configs/omap_3430sdp_defconfig | 178 -
> arch/arm/configs/omap_3630sdp_defconfig | 154 -
> arch/arm/configs/omap_apollon_2420_defconfig | 92 -
> arch/arm/configs/omap_h4_2420_defconfig | 107 -
> arch/arm/configs/omap_ldp_defconfig | 135 -
> arch/arm/configs/omap_zoom2_defconfig | 143 -
> arch/arm/configs/omap_zoom3_defconfig | 155 -
> arch/arm/configs/overo_defconfig | 275 -
> arch/arm/configs/rx51_defconfig | 222 -
> arch/arm/include/asm/assembler.h | 13 +-
> arch/arm/include/asm/cacheflush.h | 9 +-
> arch/arm/include/asm/domain.h | 31 +-
> arch/arm/include/asm/elf.h | 3 +
> arch/arm/include/asm/futex.h | 9 +-
> arch/arm/include/asm/hwcap.h | 1 +
> arch/arm/include/asm/irq.h | 2 +
> arch/arm/include/asm/kexec.h | 22 +-
> arch/arm/include/asm/mach/arch.h | 2 +
> arch/arm/include/asm/mach/irq.h | 1 +
> arch/arm/include/asm/mach/map.h | 2 +
> arch/arm/include/asm/mach/pci.h | 1 +
> arch/arm/include/asm/memblock.h | 16 +
> arch/arm/include/asm/memory.h | 76 +-
> arch/arm/include/asm/mmzone.h | 30 -
> arch/arm/include/asm/perf_event.h | 2 +-
> arch/arm/include/asm/pgtable.h | 29 +-
> arch/arm/include/asm/ptrace.h | 36 +
> arch/arm/include/asm/setup.h | 8 +-
> arch/arm/include/asm/smp_plat.h | 4 +
> arch/arm/include/asm/system.h | 2 +-
> arch/arm/include/asm/tlbflush.h | 12 +-
> arch/arm/include/asm/tls.h | 46 +
> arch/arm/include/asm/traps.h | 2 +
> arch/arm/include/asm/uaccess.h | 16 +-
> arch/arm/include/asm/unistd.h | 1 +
> arch/arm/include/asm/vfpmacros.h | 18 +
> arch/arm/kernel/Makefile | 6 +-
> arch/arm/kernel/calls.S | 1 +
> arch/arm/kernel/compat.c | 7 -
> arch/arm/kernel/compat.h | 2 -
> arch/arm/kernel/crash_dump.c | 60 +
> arch/arm/kernel/entry-armv.S | 29 +-
> arch/arm/kernel/entry-common.S | 124 +-
> arch/arm/kernel/fiq.c | 5 +
> arch/arm/kernel/irq.c | 41 +-
> arch/arm/kernel/machine_kexec.c | 14 +-
> arch/arm/kernel/module.c | 34 +
> arch/arm/kernel/perf_event.c | 12 +-
> arch/arm/kernel/process.c | 29 +-
> arch/arm/kernel/ptrace.c | 96 +
> arch/arm/kernel/relocate_kernel.S | 6 +
> arch/arm/kernel/setup.c | 113 +-
> arch/arm/kernel/smp.c | 17 +-
> arch/arm/kernel/smp_twd.c | 3 +-
> arch/arm/kernel/swp_emulate.c | 260 +
> arch/arm/kernel/tcm.c | 118 +-
> arch/arm/kernel/traps.c | 55 +-
> arch/arm/lib/Makefile | 1 -
> arch/arm/lib/getuser.S | 13 +-
> arch/arm/lib/putuser.S | 29 +-
> arch/arm/lib/uaccess.S | 83 +-
> arch/arm/mach-aaec2000/include/mach/memory.h | 10 -
> arch/arm/mach-at91/Kconfig | 11 +
> arch/arm/mach-at91/Makefile | 3 +
> arch/arm/mach-at91/at91sam9g45.c | 11 +
> arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c | 45 +
> arch/arm/mach-at91/board-sam9g20ek.c | 45 +
> arch/arm/mach-at91/board-snapper9260.c | 189 +
> arch/arm/mach-at91/include/mach/at91cap9.h | 2 +-
> arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h | 22 +-
> arch/arm/mach-at91/include/mach/at91sam9260.h | 2 +-
> arch/arm/mach-at91/include/mach/at91sam9261.h | 2 +-
> arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h | 130 +
> arch/arm/mach-at91/include/mach/at91sam9_sdramc.h | 23 +-
> arch/arm/mach-at91/include/mach/at91sam9rl.h | 2 +-
> arch/arm/mach-at91/include/mach/board.h | 2 +
> arch/arm/mach-at91/include/mach/cpu.h | 10 +
> arch/arm/mach-at91/include/mach/gpio.h | 1 +
> arch/arm/mach-at91/pm.h | 49 +-
> arch/arm/mach-at91/pm_slowclock.S | 74 +-
> arch/arm/mach-bcmring/core.c | 23 +-
> arch/arm/mach-clps711x/Kconfig | 1 -
> arch/arm/mach-clps711x/clep7312.c | 1 -
> arch/arm/mach-clps711x/edb7211-arch.c | 10 +-
> arch/arm/mach-clps711x/fortunet.c | 1 -
> arch/arm/mach-clps711x/include/mach/memory.h | 2 -
> arch/arm/mach-cns3xxx/Makefile | 3 +-
> arch/arm/mach-cns3xxx/cns3420vb.c | 4 +
> arch/arm/mach-cns3xxx/devices.c | 111 +
> arch/arm/mach-cns3xxx/devices.h | 20 +
> arch/arm/mach-cns3xxx/include/mach/cns3xxx.h | 91 +-
> arch/arm/mach-cns3xxx/pcie.c | 389 +
> arch/arm/mach-cns3xxx/pm.c | 31 +-
> arch/arm/mach-davinci/include/mach/memory.h | 9 +-
> arch/arm/mach-dove/common.c | 61 +
> arch/arm/mach-dove/common.h | 2 +
> arch/arm/mach-dove/dove-db-setup.c | 2 +
> arch/arm/mach-ep93xx/adssphere.c | 24 +-
> arch/arm/mach-ep93xx/clock.c | 2 +-
> arch/arm/mach-ep93xx/core.c | 46 +-
> arch/arm/mach-ep93xx/edb93xx.c | 31 +-
> arch/arm/mach-ep93xx/gesbc9312.c | 24 +-
> arch/arm/mach-ep93xx/include/mach/platform.h | 3 +
> arch/arm/mach-ep93xx/micro9.c | 37 +-
> arch/arm/mach-ep93xx/simone.c | 24 +-
> arch/arm/mach-ep93xx/ts72xx.c | 27 +-
> arch/arm/mach-imx/Kconfig | 193 +
> arch/arm/{mach-mx2 => mach-imx}/Makefile | 18 +-
> arch/arm/{mach-mx2 => mach-imx}/Makefile.boot | 4 +
> .../{mach-mx1/clock.c => mach-imx/clock-imx1.c} | 50 +-
> .../clock_imx21.c => mach-imx/clock-imx21.c} | 0
> .../clock_imx27.c => mach-imx/clock-imx27.c} | 2 +-
> .../{mach-mx2/cpu_imx27.c => mach-imx/cpu-imx27.c} | 0
> arch/arm/mach-imx/devices-imx1.h | 18 +
> arch/arm/mach-imx/devices-imx21.h | 30 +
> arch/arm/mach-imx/devices-imx27.h | 38 +
> arch/arm/{mach-mx2 => mach-imx}/devices.c | 296 +-
> arch/arm/{mach-mx2 => mach-imx}/devices.h | 32 +-
> .../{plat-mxc/dma-mx1-mx2.c => mach-imx/dma-v1.c} | 4 +-
> arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 392 +
> arch/arm/mach-imx/include/mach/dma-mx1-mx2.h | 10 +
> .../include/mach/dma-v1.h} | 10 +-
> arch/arm/{mach-mx2 => mach-imx}/mach-cpuimx27.c | 122 +-
> arch/arm/{mach-mx2 => mach-imx}/mach-imx27lite.c | 11 +-
> arch/arm/{mach-mx1 => mach-imx}/mach-mx1ads.c | 34 +-
> arch/arm/{mach-mx2 => mach-imx}/mach-mx21ads.c | 58 +-
> arch/arm/{mach-mx2 => mach-imx}/mach-mx27_3ds.c | 40 +-
> arch/arm/{mach-mx2 => mach-imx}/mach-mx27ads.c | 76 +-
> arch/arm/{mach-mx2 => mach-imx}/mach-mxt_td60.c | 36 +-
> arch/arm/{mach-mx2 => mach-imx}/mach-pca100.c | 114 +-
> arch/arm/{mach-mx2 => mach-imx}/mach-pcm038.c | 33 +-
> arch/arm/{mach-mx1 => mach-imx}/mach-scb9328.c | 21 +-
> .../arm/{mach-mx1/generic.c => mach-imx/mm-imx1.c} | 23 +-
> arch/arm/{mach-mx2 => mach-imx}/mm-imx21.c | 5 +-
> arch/arm/{mach-mx2 => mach-imx}/mm-imx27.c | 5 +-
> .../ksym_mx1.c => mach-imx/mx1-camera-fiq-ksym.c} | 0
> .../mx1_camera_fiq.S => mach-imx/mx1-camera-fiq.S} | 0
> arch/arm/{mach-mx2 => mach-imx}/pcm970-baseboard.c | 0
> arch/arm/mach-imx/pm-imx27.c | 46 +
> arch/arm/mach-integrator/common.h | 1 +
> arch/arm/mach-integrator/core.c | 19 +-
> arch/arm/mach-integrator/integrator_ap.c | 3 +
> arch/arm/mach-integrator/integrator_cp.c | 3 +
> arch/arm/mach-integrator/pci_v3.c | 8 +-
> arch/arm/mach-iop13xx/include/mach/memory.h | 2 -
> arch/arm/mach-iop13xx/pci.c | 2 +-
> arch/arm/mach-ixp2000/pci.c | 2 +-
> arch/arm/mach-ixp23xx/pci.c | 2 +-
> arch/arm/mach-ixp4xx/common-pci.c | 7 +-
> arch/arm/mach-ixp4xx/include/mach/memory.h | 6 +-
> arch/arm/mach-kirkwood/Kconfig | 19 +
> arch/arm/mach-kirkwood/Makefile | 2 +
> arch/arm/mach-kirkwood/addr-map.c | 10 +-
> arch/arm/mach-kirkwood/common.c | 38 +-
> arch/arm/mach-kirkwood/common.h | 5 +-
> arch/arm/mach-kirkwood/db88f6281-bp-setup.c | 18 +-
> arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 3 +-
> arch/arm/mach-kirkwood/include/mach/irqs.h | 1 +
> arch/arm/mach-kirkwood/include/mach/kirkwood.h | 39 +-
> arch/arm/mach-kirkwood/include/mach/leds-ns2.h | 26 +
> arch/arm/mach-kirkwood/mpp.c | 3 +-
> arch/arm/mach-kirkwood/mpp.h | 596 +-
> arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c | 2 +-
> arch/arm/mach-kirkwood/netspace_v2-setup.c | 104 +-
> arch/arm/mach-kirkwood/netxbig_v2-setup.c | 32 +-
> arch/arm/mach-kirkwood/openrd-setup.c | 29 +-
> arch/arm/mach-kirkwood/pcie.c | 174 +-
> arch/arm/mach-kirkwood/rd88f6192-nas-setup.c | 2 +-
> arch/arm/mach-kirkwood/rd88f6281-setup.c | 2 +-
> arch/arm/mach-kirkwood/t5325-setup.c | 194 +
> arch/arm/mach-kirkwood/ts219-setup.c | 11 +-
> arch/arm/mach-kirkwood/ts41x-setup.c | 39 +-
> arch/arm/mach-ks8695/pci.c | 4 +-
> arch/arm/mach-l7200/Makefile | 11 -
> arch/arm/mach-l7200/Makefile.boot | 2 -
> arch/arm/mach-l7200/core.c | 100 -
> arch/arm/mach-l7200/include/mach/aux_reg.h | 28 -
> arch/arm/mach-l7200/include/mach/debug-macro.S | 40 -
> arch/arm/mach-l7200/include/mach/entry-macro.S | 35 -
> arch/arm/mach-l7200/include/mach/gp_timers.h | 42 -
> arch/arm/mach-l7200/include/mach/gpio.h | 105 -
> arch/arm/mach-l7200/include/mach/hardware.h | 57 -
> arch/arm/mach-l7200/include/mach/io.h | 21 -
> arch/arm/mach-l7200/include/mach/irqs.h | 56 -
> arch/arm/mach-l7200/include/mach/memory.h | 26 -
> arch/arm/mach-l7200/include/mach/pmpcon.h | 46 -
> arch/arm/mach-l7200/include/mach/pmu.h | 125 -
> arch/arm/mach-l7200/include/mach/serial.h | 37 -
> arch/arm/mach-l7200/include/mach/serial_l7200.h | 101 -
> arch/arm/mach-l7200/include/mach/sib.h | 119 -
> arch/arm/mach-l7200/include/mach/sys-clock.h | 67 -
> arch/arm/mach-l7200/include/mach/system.h | 29 -
> arch/arm/mach-l7200/include/mach/time.h | 73 -
> arch/arm/mach-l7200/include/mach/timex.h | 20 -
> arch/arm/mach-l7200/include/mach/uncompress.h | 39 -
> arch/arm/mach-l7200/include/mach/vmalloc.h | 4 -
> arch/arm/mach-lh7a40x/include/mach/memory.h | 44 -
> arch/arm/mach-lpc32xx/Kconfig | 33 +
> arch/arm/mach-lpc32xx/Makefile | 8 +
> arch/arm/mach-lpc32xx/Makefile.boot | 4 +
> arch/arm/mach-lpc32xx/clock.c | 1137 +++
> arch/arm/mach-lpc32xx/clock.h | 38 +
> arch/arm/mach-lpc32xx/common.c | 271 +
> arch/arm/mach-lpc32xx/common.h | 73 +
> arch/arm/mach-lpc32xx/gpiolib.c | 446 ++
> .../include/mach/clkdev.h} | 19 +-
> .../include/mach/debug-macro.S} | 25 +-
> arch/arm/mach-lpc32xx/include/mach/entry-macro.S | 47 +
> arch/arm/mach-lpc32xx/include/mach/gpio.h | 74 +
> arch/arm/mach-lpc32xx/include/mach/hardware.h | 34 +
> arch/arm/mach-lpc32xx/include/mach/i2c.h | 63 +
> .../include/mach/io.h} | 21 +-
> arch/arm/mach-lpc32xx/include/mach/irqs.h | 117 +
> .../include/mach/memory.h} | 21 +-
> arch/arm/mach-lpc32xx/include/mach/platform.h | 694 ++
> arch/arm/mach-lpc32xx/include/mach/system.h | 52 +
> .../include/mach/timex.h} | 22 +-
> arch/arm/mach-lpc32xx/include/mach/uncompress.h | 60 +
> .../include/mach/vmalloc.h} | 18 +-
> arch/arm/mach-lpc32xx/irq.c | 432 +
> arch/arm/mach-lpc32xx/phy3250.c | 397 +
> arch/arm/mach-lpc32xx/pm.c | 146 +
> arch/arm/mach-lpc32xx/serial.c | 190 +
> arch/arm/mach-lpc32xx/suspend.S | 151 +
> arch/arm/mach-lpc32xx/timer.c | 182 +
> arch/arm/mach-msm/Makefile | 2 +-
> arch/arm/mach-msm/board-trout-gpio.c | 112 +
> arch/arm/mach-msm/board-trout.c | 1 -
> arch/arm/mach-msm/board-trout.h | 157 +
> arch/arm/mach-msm/include/mach/gpio.h | 7 +
> arch/arm/mach-mx1/Kconfig | 19 -
> arch/arm/mach-mx1/Makefile | 15 -
> arch/arm/mach-mx1/Makefile.boot | 4 -
> arch/arm/mach-mx1/crm_regs.h | 55 -
> arch/arm/mach-mx1/devices.c | 242 -
> arch/arm/mach-mx1/devices.h | 7 -
> arch/arm/mach-mx2/Kconfig | 116 -
> arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 249 -
> arch/arm/mach-mx2/serial.c | 141 -
> arch/arm/mach-mx25/Kconfig | 23 +
> arch/arm/mach-mx25/Makefile | 4 +-
> arch/arm/mach-mx25/clock.c | 70 +-
> arch/arm/mach-mx25/devices-imx25.h | 43 +
> arch/arm/mach-mx25/devices.c | 313 +-
> arch/arm/mach-mx25/devices.h | 16 +-
> arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c | 260 +
> arch/arm/mach-mx25/mach-cpuimx25.c | 173 +
> .../mach-mx25/{mach-mx25pdk.c => mach-mx25_3ds.c} | 58 +-
> arch/arm/mach-mx25/mm.c | 7 +-
> arch/arm/mach-mx3/Kconfig | 53 +
> arch/arm/mach-mx3/Makefile | 4 +-
> arch/arm/mach-mx3/clock-imx35.c | 6 +-
> arch/arm/mach-mx3/devices-imx31.h | 38 +
> arch/arm/mach-mx3/devices-imx35.h | 37 +
> arch/arm/mach-mx3/devices.c | 247 +-
> arch/arm/mach-mx3/devices.h | 13 -
> arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c | 263 +
> arch/arm/mach-mx3/mach-armadillo5x0.c | 17 +-
> arch/arm/mach-mx3/mach-cpuimx35.c | 227 +
> arch/arm/mach-mx3/mach-kzm_arm11_01.c | 31 +-
> arch/arm/mach-mx3/mach-mx31_3ds.c | 256 +-
> arch/arm/mach-mx3/mach-mx31ads.c | 55 +-
> arch/arm/mach-mx3/mach-mx31lilly.c | 15 +-
> arch/arm/mach-mx3/mach-mx31lite.c | 17 +-
> arch/arm/mach-mx3/mach-mx31moboard.c | 50 +-
> .../mach-mx3/{mach-mx35pdk.c => mach-mx35_3ds.c} | 16 +-
> arch/arm/mach-mx3/mach-pcm037.c | 34 +-
> arch/arm/mach-mx3/mach-pcm037_eet.c | 7 +-
> arch/arm/mach-mx3/mach-pcm043.c | 31 +-
> arch/arm/mach-mx3/mach-qong.c | 16 +-
> arch/arm/mach-mx3/mm.c | 7 +-
> arch/arm/mach-mx3/mx31lilly-db.c | 14 +-
> arch/arm/mach-mx3/mx31lite-db.c | 15 +-
> arch/arm/mach-mx3/mx31moboard-devboard.c | 10 +-
> arch/arm/mach-mx3/mx31moboard-marxbot.c | 4 -
> arch/arm/mach-mx3/mx31moboard-smartbot.c | 11 +-
> arch/arm/mach-mx5/Kconfig | 27 +
> arch/arm/mach-mx5/Makefile | 4 +-
> arch/arm/mach-mx5/board-cpuimx51.c | 293 +
> arch/arm/mach-mx5/board-mx51_3ds.c | 164 +
> arch/arm/mach-mx5/board-mx51_babbage.c | 28 +-
> arch/arm/mach-mx5/clock-mx51.c | 16 +
> arch/arm/mach-mx5/devices.c | 83 +-
> arch/arm/mach-mx5/devices.h | 4 +
> arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c | 200 +
> arch/arm/mach-mx5/mm.c | 3 +
> arch/arm/mach-mxc91231/crm_regs.h | 5 -
> arch/arm/mach-mxc91231/devices.c | 2 +-
> arch/arm/mach-mxc91231/mm.c | 8 +-
> arch/arm/mach-nomadik/clock.c | 4 +
> arch/arm/mach-omap1/Kconfig | 13 +
> arch/arm/mach-omap1/Makefile | 3 +
> arch/arm/mach-omap1/board-ams-delta.c | 3 +-
> arch/arm/mach-omap1/board-fsample.c | 13 +
> arch/arm/mach-omap1/board-generic.c | 5 +-
> arch/arm/mach-omap1/board-h2.c | 32 +-
> arch/arm/mach-omap1/board-h3.c | 16 +-
> arch/arm/mach-omap1/board-htcherald.c | 3 +-
> arch/arm/mach-omap1/board-innovator.c | 5 +-
> arch/arm/mach-omap1/board-nokia770.c | 137 +-
> arch/arm/mach-omap1/board-osk.c | 3 +-
> arch/arm/mach-omap1/board-palmte.c | 87 +-
> arch/arm/mach-omap1/board-palmtt.c | 3 +-
> arch/arm/mach-omap1/board-palmz71.c | 16 +-
> arch/arm/mach-omap1/board-perseus2.c | 13 +
> arch/arm/mach-omap1/board-sx1.c | 5 +-
> arch/arm/mach-omap1/board-voiceblue.c | 3 +-
> arch/arm/mach-omap1/clock.c | 22 +-
> arch/arm/mach-omap1/clock.h | 2 +-
> arch/arm/mach-omap1/clock_data.c | 149 +-
> arch/arm/mach-omap1/devices.c | 72 -
> arch/arm/mach-omap1/include/mach/debug-macro.S | 10 +-
> arch/arm/mach-omap1/io.c | 2 -
> arch/arm/mach-omap1/mailbox.c | 55 +-
> arch/arm/mach-omap1/mcbsp.c | 3 -
> arch/arm/mach-omap1/mux.c | 6 +-
> arch/arm/mach-omap1/serial.c | 7 +
> arch/arm/mach-omap1/usb.c | 530 ++
> arch/arm/mach-omap2/Kconfig | 89 +
> arch/arm/mach-omap2/Makefile | 23 +-
> arch/arm/mach-omap2/board-2430sdp.c | 24 +-
> arch/arm/mach-omap2/board-3430sdp.c | 25 +-
> arch/arm/mach-omap2/board-3630sdp.c | 130 +-
> arch/arm/mach-omap2/board-4430sdp.c | 71 +-
> arch/arm/mach-omap2/board-am3517evm.c | 9 +-
> arch/arm/mach-omap2/board-apollon.c | 31 +-
> arch/arm/mach-omap2/board-cm-t35.c | 29 +-
> arch/arm/mach-omap2/board-devkit8000.c | 170 +-
> .../{board-sdp-flash.c => board-flash.c} | 93 +-
> arch/arm/mach-omap2/board-generic.c | 2 +-
> arch/arm/mach-omap2/board-h4.c | 61 +-
> arch/arm/mach-omap2/board-igep0020.c | 9 +-
> arch/arm/mach-omap2/board-ldp.c | 44 +-
> arch/arm/mach-omap2/board-n8x0.c | 14 +
> arch/arm/mach-omap2/board-omap3beagle.c | 17 +-
> arch/arm/mach-omap2/board-omap3evm.c | 9 +-
> arch/arm/mach-omap2/board-omap3pandora.c | 157 +-
> arch/arm/mach-omap2/board-omap3stalker.c | 8 +-
> arch/arm/mach-omap2/board-omap3touchbook.c | 34 +-
> arch/arm/mach-omap2/board-omap4panda.c | 304 +
> arch/arm/mach-omap2/board-overo.c | 75 +-
> arch/arm/mach-omap2/board-rx51-peripherals.c | 78 +-
> arch/arm/mach-omap2/board-rx51-video.c | 1 -
> arch/arm/mach-omap2/board-rx51.c | 3 +-
> arch/arm/mach-omap2/board-zoom2.c | 65 +-
> arch/arm/mach-omap2/board-zoom3.c | 65 +-
> arch/arm/mach-omap2/clock3xxx_data.c | 7 +-
> arch/arm/mach-omap2/cm.c | 6 +-
> arch/arm/mach-omap2/devices.c | 88 +-
> arch/arm/mach-omap2/gpmc-nand.c | 37 +-
> arch/arm/mach-omap2/gpmc.c | 284 +-
> arch/arm/mach-omap2/i2c.c | 27 +-
> arch/arm/mach-omap2/id.c | 64 +-
> .../include/mach/{board-sdp.h => board-flash.h} | 9 +-
> arch/arm/mach-omap2/include/mach/board-zoom.h | 6 +
> arch/arm/mach-omap2/include/mach/debug-macro.S | 29 +-
> arch/arm/mach-omap2/include/mach/id.h | 22 +
> arch/arm/mach-omap2/include/mach/omap4-common.h | 7 +
> arch/arm/mach-omap2/io.c | 16 +-
> arch/arm/mach-omap2/iommu2.c | 44 +-
> arch/arm/mach-omap2/mailbox.c | 182 +-
> arch/arm/mach-omap2/mcbsp.c | 13 +-
> arch/arm/mach-omap2/mux.c | 338 +-
> arch/arm/mach-omap2/mux.h | 28 +-
> arch/arm/mach-omap2/mux2420.c | 688 ++
> arch/arm/mach-omap2/mux2420.h | 282 +
> arch/arm/mach-omap2/mux2430.c | 791 ++
> arch/arm/mach-omap2/mux2430.h | 370 +
> arch/arm/mach-omap2/mux34xx.c | 8 +-
> arch/arm/mach-omap2/omap-headsmp.S | 16 -
> arch/arm/mach-omap2/omap-hotplug.c | 79 +
> arch/arm/mach-omap2/omap-iommu.c | 2 +-
> arch/arm/mach-omap2/omap-smp.c | 3 +-
> arch/arm/mach-omap2/omap44xx-smc.S | 25 +
> arch/arm/mach-omap2/omap_hwmod.c | 106 +-
> arch/arm/mach-omap2/omap_hwmod_2420_data.c | 79 +-
> arch/arm/mach-omap2/omap_hwmod_2430_data.c | 81 +-
> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 92 +-
> arch/arm/mach-omap2/omap_hwmod_common_data.c | 3 +
> arch/arm/mach-omap2/omap_hwmod_common_data.h | 1 +
> arch/arm/mach-omap2/pm.c | 84 +
> arch/arm/mach-omap2/pm24xx.c | 1 -
> arch/arm/mach-omap2/pm34xx.c | 7 +-
> arch/arm/mach-omap2/pm44xx.c | 135 +
> arch/arm/mach-omap2/powerdomain.c | 1 +
> arch/arm/mach-omap2/powerdomains34xx.h | 12 +-
> arch/arm/mach-omap2/serial.c | 80 +-
> arch/arm/mach-omap2/usb-ehci.c | 1 -
> arch/arm/mach-omap2/usb-fs.c | 359 +
> arch/arm/mach-omap2/usb-musb.c | 1 -
> arch/arm/mach-omap2/usb-tusb6010.c | 14 +-
> arch/arm/mach-orion5x/Kconfig | 1 +
> arch/arm/mach-orion5x/dns323-setup.c | 370 +-
> arch/arm/mach-orion5x/include/mach/system.h | 2 +
> arch/arm/mach-pxa/cm-x2xx-pci.c | 4 +-
> arch/arm/mach-pxa/corgi.c | 1 -
> arch/arm/mach-pxa/eseries.c | 1 -
> arch/arm/mach-pxa/generic.h | 3 +-
> arch/arm/mach-pxa/include/mach/memory.h | 19 +-
> arch/arm/mach-pxa/palmt5.c | 7 +
> arch/arm/mach-pxa/palmtreo.c | 9 +
> arch/arm/mach-pxa/poodle.c | 1 -
> arch/arm/mach-pxa/spitz.c | 1 -
> arch/arm/mach-pxa/tosa.c | 1 -
> arch/arm/mach-realview/core.c | 40 +-
> arch/arm/mach-realview/include/mach/board-pb1176.h | 1 +
> arch/arm/mach-realview/include/mach/irqs-pb1176.h | 2 +-
> arch/arm/mach-realview/include/mach/memory.h | 7 +-
> arch/arm/mach-realview/realview_eb.c | 30 +-
> arch/arm/mach-realview/realview_pb1176.c | 46 +-
> arch/arm/mach-realview/realview_pb11mp.c | 9 +-
> arch/arm/mach-realview/realview_pba8.c | 9 +-
> arch/arm/mach-realview/realview_pbx.c | 9 +-
> arch/arm/mach-s3c2410/mach-h1940.c | 9 +
> arch/arm/mach-s3c2412/mach-smdk2413.c | 1 -
> arch/arm/mach-s3c2412/mach-vstms.c | 1 -
> arch/arm/mach-s3c2440/mach-rx1950.c | 9 +
> arch/arm/mach-s3c2440/mach-rx3715.c | 9 +
> arch/arm/mach-sa1100/generic.h | 3 +-
> arch/arm/mach-sa1100/include/mach/memory.h | 6 +-
> arch/arm/mach-shark/include/mach/memory.h | 7 +-
> arch/arm/mach-shmobile/Kconfig | 12 +
> arch/arm/mach-shmobile/include/mach/irqs.h | 1 -
> arch/arm/mach-spear3xx/clock.c | 3 +
> arch/arm/mach-spear6xx/clock.c | 3 +
> arch/arm/mach-u300/clock.c | 6 +
> arch/arm/mach-u300/include/mach/memory.h | 8 -
> arch/arm/mach-u300/u300.c | 17 +
> arch/arm/mach-ux500/board-mop500.c | 36 +-
> arch/arm/mach-ux500/clock.c | 4 +
> arch/arm/mach-ux500/devices-db8500.c | 14 +-
> .../mach-ux500/include/mach/irqs-board-mop500.h | 23 +
> arch/arm/mach-ux500/include/mach/irqs-db5500.h | 85 +
> arch/arm/mach-ux500/include/mach/irqs-db8500.h | 96 +
> arch/arm/mach-ux500/include/mach/irqs.h | 22 +-
> arch/arm/mach-ux500/pins-db8500.h | 742 ++
> arch/arm/mach-versatile/core.c | 35 +-
> arch/arm/mach-versatile/pci.c | 2 +-
> arch/arm/mach-vexpress/ct-ca9x4.c | 4 +-
> arch/arm/mach-vexpress/include/mach/ct-ca9x4.h | 1 +
> arch/arm/mach-vexpress/v2m.c | 7 +-
> arch/arm/mach-w90x900/dev.c | 96 +-
> arch/arm/mach-w90x900/include/mach/regs-gcr.h | 39 +
> arch/arm/mach-w90x900/mach-nuc950evb.c | 44 -
> arch/arm/mach-w90x900/nuc910.c | 2 +
> arch/arm/mach-w90x900/nuc950.c | 2 -
> arch/arm/mm/Kconfig | 56 +-
> arch/arm/mm/Makefile | 1 -
> arch/arm/mm/alignment.c | 16 +-
> arch/arm/mm/cache-l2x0.c | 15 +-
> arch/arm/mm/copypage-v4mc.c | 2 +-
> arch/arm/mm/copypage-v6.c | 2 +-
> arch/arm/mm/copypage-xscale.c | 2 +-
> arch/arm/mm/discontig.c | 45 -
> arch/arm/mm/dma-mapping.c | 21 +-
> arch/arm/mm/fault-armv.c | 8 +-
> arch/arm/mm/fault.c | 56 +-
> arch/arm/mm/flush.c | 50 +-
> arch/arm/mm/init.c | 424 +-
> arch/arm/mm/ioremap.c | 80 +-
> arch/arm/mm/mm.h | 4 +-
> arch/arm/mm/mmu.c | 192 +-
> arch/arm/mm/nommu.c | 22 +-
> arch/arm/mm/proc-arm1020.S | 6 +-
> arch/arm/mm/proc-arm1020e.S | 6 +-
> arch/arm/mm/proc-arm1022.S | 6 +-
> arch/arm/mm/proc-arm1026.S | 6 +-
> arch/arm/mm/proc-arm6_7.S | 2 -
> arch/arm/mm/proc-arm720.S | 6 +-
> arch/arm/mm/proc-arm740.S | 6 +-
> arch/arm/mm/proc-arm7tdmi.S | 2 -
> arch/arm/mm/proc-arm920.S | 10 +-
> arch/arm/mm/proc-arm922.S | 10 +-
> arch/arm/mm/proc-arm925.S | 6 +-
> arch/arm/mm/proc-arm926.S | 6 +-
> arch/arm/mm/proc-arm940.S | 6 +-
> arch/arm/mm/proc-arm946.S | 6 +-
> arch/arm/mm/proc-arm9tdmi.S | 2 -
> arch/arm/mm/proc-fa526.S | 6 +-
> arch/arm/mm/proc-feroceon.S | 7 +-
> arch/arm/mm/proc-macros.S | 7 +
> arch/arm/mm/proc-mohawk.S | 6 +-
> arch/arm/mm/proc-sa110.S | 8 +-
> arch/arm/mm/proc-sa1100.S | 6 +-
> arch/arm/mm/proc-v6.S | 10 +-
> arch/arm/mm/proc-v7.S | 16 +-
> arch/arm/mm/proc-xsc3.S | 6 +-
> arch/arm/mm/proc-xscale.S | 6 +-
> arch/arm/mm/vmregion.c | 5 +-
> arch/arm/mm/vmregion.h | 2 +-
> arch/arm/oprofile/common.c | 47 +-
> arch/arm/plat-iop/pci.c | 2 +-
> arch/arm/plat-iop/time.c | 53 +-
> arch/arm/plat-mxc/3ds_debugboard.c | 202 +
> arch/arm/plat-mxc/Kconfig | 22 +-
> arch/arm/plat-mxc/Makefile | 5 +-
> arch/arm/plat-mxc/audmux-v1.c | 4 -
> arch/arm/plat-mxc/audmux-v2.c | 19 +-
> arch/arm/plat-mxc/clock.c | 37 +-
> arch/arm/plat-mxc/devices.c | 33 +
> arch/arm/plat-mxc/devices/Kconfig | 15 +
> arch/arm/plat-mxc/devices/Makefile | 8 +
> arch/arm/plat-mxc/devices/platform-flexcan.c | 30 +
> arch/arm/plat-mxc/devices/platform-imx-i2c.c | 29 +
> arch/arm/plat-mxc/devices/platform-imx-uart.c | 60 +
> arch/arm/plat-mxc/devices/platform-mxc_nand.c | 44 +
> arch/arm/plat-mxc/devices/platform-spi_imx.c | 30 +
> arch/arm/plat-mxc/ehci.c | 50 +-
> arch/arm/plat-mxc/gpio.c | 6 +
> arch/arm/plat-mxc/include/mach/3ds_debugboard.h | 18 +
> .../arm/plat-mxc/include/mach/board-armadillo5x0.h | 15 -
> arch/arm/plat-mxc/include/mach/board-kzmarm11.h | 39 -
> arch/arm/plat-mxc/include/mach/board-mx21ads.h | 52 -
> arch/arm/plat-mxc/include/mach/board-mx27ads.h | 344 -
> arch/arm/plat-mxc/include/mach/board-mx27lite.h | 14 -
> arch/arm/plat-mxc/include/mach/board-mx27pdk.h | 14 -
> arch/arm/plat-mxc/include/mach/board-mx31_3ds.h | 59 -
> arch/arm/plat-mxc/include/mach/board-mx31ads.h | 117 -
> arch/arm/plat-mxc/include/mach/board-mx31lilly.h | 2 +-
> arch/arm/plat-mxc/include/mach/board-mx31lite.h | 2 +-
> arch/arm/plat-mxc/include/mach/board-mx31moboard.h | 2 +-
> arch/arm/plat-mxc/include/mach/board-pcm038.h | 2 +-
> arch/arm/plat-mxc/include/mach/board-qong.h | 17 -
> arch/arm/plat-mxc/include/mach/debug-macro.S | 4 +-
> arch/arm/plat-mxc/include/mach/devices-common.h | 60 +
> ...board-eukrea_cpuimx27.h => eukrea-baseboards.h} | 19 +-
> arch/arm/plat-mxc/include/mach/gpio.h | 1 +
> arch/arm/plat-mxc/include/mach/iomux-mx25.h | 28 +-
> arch/arm/plat-mxc/include/mach/iomux-mx51.h | 559 +-
> arch/arm/plat-mxc/include/mach/iomux-mxc91231.h | 4 -
> arch/arm/plat-mxc/include/mach/iomux-v3.h | 15 +
> arch/arm/plat-mxc/include/mach/memory.h | 4 +-
> arch/arm/plat-mxc/include/mach/mmc.h | 3 +
> arch/arm/plat-mxc/include/mach/mx1.h | 28 +-
> arch/arm/plat-mxc/include/mach/mx25.h | 50 +-
> arch/arm/plat-mxc/include/mach/mx27.h | 4 +-
> arch/arm/plat-mxc/include/mach/mx2_cam.h | 46 +
> arch/arm/plat-mxc/include/mach/mx31.h | 4 +-
> arch/arm/plat-mxc/include/mach/mx35.h | 6 +-
> arch/arm/plat-mxc/include/mach/mx3_camera.h | 4 -
> arch/arm/plat-mxc/include/mach/mxc91231.h | 4 -
> arch/arm/plat-mxc/include/mach/mxc_nand.h | 10 +-
> arch/arm/plat-mxc/include/mach/system.h | 4 -
> arch/arm/plat-mxc/include/mach/timex.h | 4 -
> arch/arm/plat-mxc/include/mach/uncompress.h | 4 -
> arch/arm/plat-mxc/include/mach/vmalloc.h | 4 -
> arch/arm/plat-mxc/irq.c | 3 -
> arch/arm/plat-mxc/system.c | 4 -
> arch/arm/plat-mxc/tzic.c | 2 -
> arch/arm/plat-nomadik/gpio.c | 316 +-
> arch/arm/plat-nomadik/include/plat/gpio.h | 15 +
> arch/arm/plat-nomadik/include/plat/mtu.h | 6 +
> arch/arm/plat-nomadik/include/plat/pincfg.h | 72 +
> arch/arm/plat-nomadik/timer.c | 14 +-
> arch/arm/plat-omap/Kconfig | 33 +-
> arch/arm/plat-omap/Makefile | 1 +
> arch/arm/plat-omap/common.c | 18 +-
> arch/arm/plat-omap/debug-leds.c | 2 +-
> arch/arm/plat-omap/devices.c | 124 -
> arch/arm/plat-omap/dma.c | 11 +-
> arch/arm/plat-omap/fb.c | 77 +-
> arch/arm/plat-omap/gpio.c | 4 +-
> arch/arm/plat-omap/i2c.c | 12 +-
> arch/arm/plat-omap/include/plat/board.h | 8 +
> arch/arm/plat-omap/include/plat/clock.h | 130 +-
> arch/arm/plat-omap/include/plat/common.h | 11 +-
> arch/arm/plat-omap/include/plat/cpu.h | 17 +-
> arch/arm/plat-omap/include/plat/dma.h | 1 +
> arch/arm/plat-omap/include/plat/dsp_common.h | 40 -
> arch/arm/plat-omap/include/plat/gpmc.h | 42 +-
> arch/arm/plat-omap/include/plat/iommu.h | 2 +
> arch/arm/plat-omap/include/plat/mailbox.h | 20 +-
> arch/arm/plat-omap/include/plat/mux.h | 224 +-
> arch/arm/plat-omap/include/plat/nand.h | 6 +-
> arch/arm/plat-omap/include/plat/omap-pm.h | 130 +-
> arch/arm/plat-omap/include/plat/omap_device.h | 2 +
> arch/arm/plat-omap/include/plat/omap_hwmod.h | 14 +-
> arch/arm/plat-omap/include/plat/smp.h | 1 +
> arch/arm/plat-omap/include/plat/uncompress.h | 6 +
> arch/arm/plat-omap/include/plat/usb.h | 49 +-
> arch/arm/plat-omap/include/plat/vram.h | 5 +-
> arch/arm/plat-omap/iommu.c | 27 +-
> arch/arm/plat-omap/iopgtable.h | 8 +-
> arch/arm/plat-omap/mailbox.c | 248 +-
> arch/arm/plat-omap/mux.c | 2 +-
> arch/arm/plat-omap/omap-pm-noop.c | 61 +-
> arch/arm/plat-omap/omap_device.c | 37 +-
> arch/arm/plat-omap/usb.c | 644 +--
> arch/arm/plat-orion/pcie.c | 34 +
> arch/arm/plat-spear/time.c | 47 +-
> arch/arm/plat-versatile/Makefile | 4 +
> arch/arm/plat-versatile/leds.c | 103 +
> arch/arm/vfp/vfpmodule.c | 10 +-
> debian.linaro/NOTES | 4 +
> debian.linaro/abi/2.6.35-1004.9/abiname | 1 +
> debian.linaro/abi/2.6.35-1004.9/armel/linaro-mx51 | 4847 ++++++++++++
> .../abi/2.6.35-1004.9/armel/linaro-mx51.modules | 255 +
> debian.linaro/abi/2.6.35-1004.9/armel/linaro-omap | 8286 ++++++++++++++++++++
> .../abi/2.6.35-1004.9/armel/linaro-omap.modules | 1760 +++++
> .../abi/2.6.35-1004.9/armel/linaro-vexpress | 5159 ++++++++++++
> .../2.6.35-1004.9/armel/linaro-vexpress.modules | 214 +
> debian.linaro/changelog | 125 +
> debian.linaro/changelog.historical | 4171 ++++++++++
> debian.linaro/config/armel/config.common.armel | 3 +
> .../config/armel/config.flavour.linaro-mx51 | 541 ++
> .../config/armel/config.flavour.linaro-omap | 576 ++
> .../config/armel/config.flavour.linaro-vexpress | 571 ++
> debian.linaro/config/config.common.ports | 4253 ++++++++++
> debian.linaro/config/config.common.ubuntu | 2842 +++++++
> debian.linaro/config/enforce | 57 +
> debian.linaro/control.d/flavour-control.stub | 77 +
> debian.linaro/control.d/vars.linaro-mx51 | 8 +
> debian.linaro/control.d/vars.linaro-omap | 8 +
> debian.linaro/control.d/vars.linaro-vexpress | 8 +
> debian.linaro/control.stub.in | 21 +
> debian.linaro/copyright | 29 +
> debian.linaro/d-i/firmware/README.txt | 4 +
> debian.linaro/d-i/kernel-versions.in | 6 +
> debian.linaro/d-i/modules/block-modules | 30 +
> debian.linaro/d-i/modules/crypto-modules | 8 +
> debian.linaro/d-i/modules/fat-modules | 7 +
> debian.linaro/d-i/modules/fs-core-modules | 3 +
> debian.linaro/d-i/modules/fs-secondary-modules | 5 +
> debian.linaro/d-i/modules/input-modules | 21 +
> debian.linaro/d-i/modules/irda-modules | 30 +
> debian.linaro/d-i/modules/md-modules | 13 +
> debian.linaro/d-i/modules/mouse-modules | 2 +
> debian.linaro/d-i/modules/nfs-modules | 4 +
> debian.linaro/d-i/modules/nic-modules | 155 +
> debian.linaro/d-i/modules/nic-shared-modules | 22 +
> debian.linaro/d-i/modules/nic-usb-modules | 27 +
> debian.linaro/d-i/modules/parport-modules | 2 +
> debian.linaro/d-i/modules/plip-modules | 1 +
> debian.linaro/d-i/modules/ppp-modules | 6 +
> debian.linaro/d-i/modules/sata-modules | 14 +
> debian.linaro/d-i/modules/scsi-modules | 116 +
> debian.linaro/d-i/modules/squashfs-modules | 1 +
> debian.linaro/d-i/modules/storage-core-modules | 10 +
> debian.linaro/d-i/modules/usb-modules | 9 +
> debian.linaro/d-i/modules/vlan-modules | 3 +
> debian.linaro/d-i/package-list | 190 +
> debian.linaro/etc/getabis | 8 +
> debian.linaro/etc/kernelconfig | 7 +
> debian.linaro/rules.d/armel.mk | 16 +
> debian/commit-templates/newrelease | 2 +-
> debian/debian.env | 2 +-
> debian/rules.d/0-common-vars.mk | 2 +-
> debian/rules.d/1-maintainer.mk | 2 +-
> debian/rules.d/2-binary-arch.mk | 2 +-
> debian/scripts/misc/getabis | 5 +-
> debian/scripts/misc/insert-changes.pl | 2 +-
> debian/scripts/misc/insert-ubuntu-changes | 2 +-
> debian/scripts/misc/kernelconfig | 2 +-
> debian/scripts/module-inclusion | 2 +-
> drivers/amba/bus.c | 88 +-
> drivers/gpio/pl061.c | 4 +-
> drivers/leds/Kconfig | 9 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-ns2.c | 338 +
> drivers/media/video/Kconfig | 13 +
> drivers/media/video/Makefile | 1 +
> drivers/media/video/mx2_camera.c | 1513 ++++
> drivers/misc/Kconfig | 10 +
> drivers/misc/Makefile | 1 +
> drivers/misc/arm-charlcd.c | 396 +
> drivers/mmc/core/host.c | 2 +
> drivers/mmc/host/mmci.c | 148 +-
> drivers/mmc/host/mmci.h | 39 +-
> drivers/mmc/host/mxcmmc.c | 48 +-
> drivers/mtd/nand/mxc_nand.c | 33 +-
> drivers/mtd/nand/omap2.c | 220 +-
> drivers/net/phy/marvell.c | 38 +-
> drivers/oprofile/oprof.c | 11 +-
> drivers/rtc/rtc-pl031.c | 2 +-
> drivers/serial/amba-pl010.c | 2 +-
> drivers/serial/amba-pl011.c | 90 +-
> drivers/usb/gadget/at91_udc.c | 205 +-
> drivers/usb/gadget/at91_udc.h | 3 +
> drivers/usb/gadget/fsl_mxc_udc.c | 2 +-
> drivers/usb/host/ehci-mxc.c | 2 +-
> drivers/video/console/Kconfig | 2 +-
> drivers/video/imxfb.c | 72 +-
> drivers/video/omap/lcd_apollon.c | 3 -
> drivers/video/omap2/omapfb/omapfb-main.c | 2 +-
> drivers/video/omap2/vram.c | 43 +-
> include/linux/amba/bus.h | 11 +
> include/linux/amba/mmci.h | 10 +-
> include/linux/amba/serial.h | 3 +
> include/linux/marvell_phy.h | 20 +
> include/linux/omapfb.h | 2 +-
> lib/Kconfig.debug | 7 +
> lib/atomic64_test.c | 2 +-
> lib/scatterlist.c | 23 +-
> mm/kmemleak.c | 98 +-
> scripts/kconfig/expr.h | 2 +
> scripts/kconfig/menu.c | 5 +
> scripts/kconfig/symbol.c | 18 +
> tools/perf/arch/arm/Makefile | 4 +
> tools/perf/arch/arm/util/dwarf-regs.c | 64 +
> tools/perf/builtin-buildid-list.c | 4 +-
> tools/perf/builtin-diff.c | 2 -
> tools/perf/builtin-report.c | 2 -
> tools/perf/util/event.c | 10 +-
> tools/perf/util/map.c | 22 +-
> tools/perf/util/map.h | 2 +-
> tools/perf/util/session.c | 22 +-
> tools/perf/util/symbol.c | 366 +-
> tools/perf/util/symbol.h | 1 -
> 734 files changed, 60844 insertions(+), 13825 deletions(-)
> create mode 100644 Documentation/arm/swp_emulation
> delete mode 100644 arch/arm/boot/compressed/Makefile.debug
> delete mode 100644 arch/arm/boot/compressed/head-l7200.S
> delete mode 100644 arch/arm/configs/am3517_evm_defconfig
> delete mode 100644 arch/arm/configs/cm_t35_defconfig
> delete mode 100644 arch/arm/configs/devkit8000_defconfig
> delete mode 100644 arch/arm/configs/igep0020_defconfig
> delete mode 100644 arch/arm/configs/lusl7200_defconfig
> delete mode 100644 arch/arm/configs/omap3_beagle_defconfig
> delete mode 100644 arch/arm/configs/omap3_evm_defconfig
> delete mode 100644 arch/arm/configs/omap3_pandora_defconfig
> delete mode 100644 arch/arm/configs/omap3_stalker_lks_defconfig
> delete mode 100644 arch/arm/configs/omap3_touchbook_defconfig
> delete mode 100644 arch/arm/configs/omap_2430sdp_defconfig
> delete mode 100644 arch/arm/configs/omap_3430sdp_defconfig
> delete mode 100644 arch/arm/configs/omap_3630sdp_defconfig
> delete mode 100644 arch/arm/configs/omap_apollon_2420_defconfig
> delete mode 100644 arch/arm/configs/omap_h4_2420_defconfig
> delete mode 100644 arch/arm/configs/omap_ldp_defconfig
> delete mode 100644 arch/arm/configs/omap_zoom2_defconfig
> delete mode 100644 arch/arm/configs/omap_zoom3_defconfig
> delete mode 100644 arch/arm/configs/overo_defconfig
> delete mode 100644 arch/arm/configs/rx51_defconfig
> create mode 100644 arch/arm/include/asm/memblock.h
> delete mode 100644 arch/arm/include/asm/mmzone.h
> create mode 100644 arch/arm/include/asm/tls.h
> create mode 100644 arch/arm/kernel/crash_dump.c
> create mode 100644 arch/arm/kernel/swp_emulate.c
> create mode 100644 arch/arm/mach-at91/board-snapper9260.c
> create mode 100644 arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
> create mode 100644 arch/arm/mach-cns3xxx/devices.c
> create mode 100644 arch/arm/mach-cns3xxx/devices.h
> create mode 100644 arch/arm/mach-cns3xxx/pcie.c
> create mode 100644 arch/arm/mach-imx/Kconfig
> rename arch/arm/{mach-mx2 => mach-imx}/Makefile (55%)
> rename arch/arm/{mach-mx2 => mach-imx}/Makefile.boot (67%)
> rename arch/arm/{mach-mx1/clock.c => mach-imx/clock-imx1.c} (90%)
> rename arch/arm/{mach-mx2/clock_imx21.c => mach-imx/clock-imx21.c} (100%)
> rename arch/arm/{mach-mx2/clock_imx27.c => mach-imx/clock-imx27.c} (99%)
> rename arch/arm/{mach-mx2/cpu_imx27.c => mach-imx/cpu-imx27.c} (100%)
> create mode 100644 arch/arm/mach-imx/devices-imx1.h
> create mode 100644 arch/arm/mach-imx/devices-imx21.h
> create mode 100644 arch/arm/mach-imx/devices-imx27.h
> rename arch/arm/{mach-mx2 => mach-imx}/devices.c (67%)
> rename arch/arm/{mach-mx2 => mach-imx}/devices.h (54%)
> rename arch/arm/{plat-mxc/dma-mx1-mx2.c => mach-imx/dma-v1.c} (99%)
> create mode 100644 arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
> create mode 100644 arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
> rename arch/arm/{plat-mxc/include/mach/dma-mx1-mx2.h =>
> mach-imx/include/mach/dma-v1.h} (93%)
> rename arch/arm/{mach-mx2 => mach-imx}/mach-cpuimx27.c (66%)
> rename arch/arm/{mach-mx2 => mach-imx}/mach-imx27lite.c (86%)
> rename arch/arm/{mach-mx1 => mach-imx}/mach-mx1ads.c (81%)
> rename arch/arm/{mach-mx2 => mach-imx}/mach-mx21ads.c (77%)
> rename arch/arm/{mach-mx2 => mach-imx}/mach-mx27_3ds.c (74%)
> rename arch/arm/{mach-mx2 => mach-imx}/mach-mx27ads.c (82%)
> rename arch/arm/{mach-mx2 => mach-imx}/mach-mxt_td60.c (86%)
> rename arch/arm/{mach-mx2 => mach-imx}/mach-pca100.c (80%)
> rename arch/arm/{mach-mx2 => mach-imx}/mach-pcm038.c (91%)
> rename arch/arm/{mach-mx1 => mach-imx}/mach-scb9328.c (89%)
> rename arch/arm/{mach-mx1/generic.c => mach-imx/mm-imx1.c} (68%)
> rename arch/arm/{mach-mx2 => mach-imx}/mm-imx21.c (95%)
> rename arch/arm/{mach-mx2 => mach-imx}/mm-imx27.c (95%)
> rename arch/arm/{mach-mx1/ksym_mx1.c => mach-imx/mx1-camera-fiq-ksym.c} (100%)
> rename arch/arm/{mach-mx1/mx1_camera_fiq.S => mach-imx/mx1-camera-fiq.S} (100%)
> rename arch/arm/{mach-mx2 => mach-imx}/pcm970-baseboard.c (100%)
> create mode 100644 arch/arm/mach-imx/pm-imx27.c
> create mode 100644 arch/arm/mach-integrator/common.h
> create mode 100644 arch/arm/mach-kirkwood/include/mach/leds-ns2.h
> create mode 100644 arch/arm/mach-kirkwood/t5325-setup.c
> delete mode 100644 arch/arm/mach-l7200/Makefile
> delete mode 100644 arch/arm/mach-l7200/Makefile.boot
> delete mode 100644 arch/arm/mach-l7200/core.c
> delete mode 100644 arch/arm/mach-l7200/include/mach/aux_reg.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/debug-macro.S
> delete mode 100644 arch/arm/mach-l7200/include/mach/entry-macro.S
> delete mode 100644 arch/arm/mach-l7200/include/mach/gp_timers.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/gpio.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/hardware.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/io.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/irqs.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/memory.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/pmpcon.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/pmu.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/serial.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/serial_l7200.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/sib.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/sys-clock.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/system.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/time.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/timex.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/uncompress.h
> delete mode 100644 arch/arm/mach-l7200/include/mach/vmalloc.h
> create mode 100644 arch/arm/mach-lpc32xx/Kconfig
> create mode 100644 arch/arm/mach-lpc32xx/Makefile
> create mode 100644 arch/arm/mach-lpc32xx/Makefile.boot
> create mode 100644 arch/arm/mach-lpc32xx/clock.c
> create mode 100644 arch/arm/mach-lpc32xx/clock.h
> create mode 100644 arch/arm/mach-lpc32xx/common.c
> create mode 100644 arch/arm/mach-lpc32xx/common.h
> create mode 100644 arch/arm/mach-lpc32xx/gpiolib.c
> copy arch/arm/{plat-mxc/include/mach/board-pcm037.h =>
> mach-lpc32xx/include/mach/clkdev.h} (57%)
> rename arch/arm/{plat-mxc/include/mach/board-mx35pdk.h =>
> mach-lpc32xx/include/mach/debug-macro.S} (55%)
> create mode 100644 arch/arm/mach-lpc32xx/include/mach/entry-macro.S
> create mode 100644 arch/arm/mach-lpc32xx/include/mach/gpio.h
> create mode 100644 arch/arm/mach-lpc32xx/include/mach/hardware.h
> create mode 100644 arch/arm/mach-lpc32xx/include/mach/i2c.h
> copy arch/arm/{plat-mxc/include/mach/board-pcm043.h =>
> mach-lpc32xx/include/mach/io.h} (57%)
> create mode 100644 arch/arm/mach-lpc32xx/include/mach/irqs.h
> rename arch/arm/{plat-mxc/include/mach/board-pcm043.h =>
> mach-lpc32xx/include/mach/memory.h} (57%)
> create mode 100644 arch/arm/mach-lpc32xx/include/mach/platform.h
> create mode 100644 arch/arm/mach-lpc32xx/include/mach/system.h
> copy arch/arm/{plat-mxc/include/mach/board-pcm037.h =>
> mach-lpc32xx/include/mach/timex.h} (57%)
> create mode 100644 arch/arm/mach-lpc32xx/include/mach/uncompress.h
> rename arch/arm/{plat-mxc/include/mach/board-pcm037.h =>
> mach-lpc32xx/include/mach/vmalloc.h} (57%)
> create mode 100644 arch/arm/mach-lpc32xx/irq.c
> create mode 100644 arch/arm/mach-lpc32xx/phy3250.c
> create mode 100644 arch/arm/mach-lpc32xx/pm.c
> create mode 100644 arch/arm/mach-lpc32xx/serial.c
> create mode 100644 arch/arm/mach-lpc32xx/suspend.S
> create mode 100644 arch/arm/mach-lpc32xx/timer.c
> create mode 100644 arch/arm/mach-msm/board-trout-gpio.c
> delete mode 100644 arch/arm/mach-mx1/Kconfig
> delete mode 100644 arch/arm/mach-mx1/Makefile
> delete mode 100644 arch/arm/mach-mx1/Makefile.boot
> delete mode 100644 arch/arm/mach-mx1/crm_regs.h
> delete mode 100644 arch/arm/mach-mx1/devices.c
> delete mode 100644 arch/arm/mach-mx1/devices.h
> delete mode 100644 arch/arm/mach-mx2/Kconfig
> delete mode 100644 arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
> delete mode 100644 arch/arm/mach-mx2/serial.c
> create mode 100644 arch/arm/mach-mx25/devices-imx25.h
> create mode 100644 arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
> create mode 100644 arch/arm/mach-mx25/mach-cpuimx25.c
> rename arch/arm/mach-mx25/{mach-mx25pdk.c => mach-mx25_3ds.c} (76%)
> create mode 100644 arch/arm/mach-mx3/devices-imx31.h
> create mode 100644 arch/arm/mach-mx3/devices-imx35.h
> create mode 100644 arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
> create mode 100644 arch/arm/mach-mx3/mach-cpuimx35.c
> rename arch/arm/mach-mx3/{mach-mx35pdk.c => mach-mx35_3ds.c} (89%)
> create mode 100644 arch/arm/mach-mx5/board-cpuimx51.c
> create mode 100644 arch/arm/mach-mx5/board-mx51_3ds.c
> create mode 100644 arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
> create mode 100644 arch/arm/mach-omap1/usb.c
> rename arch/arm/mach-omap2/{board-sdp-flash.c => board-flash.c} (66%)
> create mode 100644 arch/arm/mach-omap2/board-omap4panda.c
> rename arch/arm/mach-omap2/include/mach/{board-sdp.h => board-flash.h} (71%)
> create mode 100644 arch/arm/mach-omap2/include/mach/id.h
> create mode 100644 arch/arm/mach-omap2/mux2420.c
> create mode 100644 arch/arm/mach-omap2/mux2420.h
> create mode 100644 arch/arm/mach-omap2/mux2430.c
> create mode 100644 arch/arm/mach-omap2/mux2430.h
> create mode 100644 arch/arm/mach-omap2/omap-hotplug.c
> create mode 100644 arch/arm/mach-omap2/pm.c
> create mode 100644 arch/arm/mach-omap2/pm44xx.c
> create mode 100644 arch/arm/mach-omap2/usb-fs.c
> create mode 100644 arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
> create mode 100644 arch/arm/mach-ux500/include/mach/irqs-db5500.h
> create mode 100644 arch/arm/mach-ux500/include/mach/irqs-db8500.h
> create mode 100644 arch/arm/mach-ux500/pins-db8500.h
> create mode 100644 arch/arm/mach-w90x900/include/mach/regs-gcr.h
> delete mode 100644 arch/arm/mm/discontig.c
> create mode 100644 arch/arm/plat-mxc/3ds_debugboard.c
> create mode 100644 arch/arm/plat-mxc/devices/Kconfig
> create mode 100644 arch/arm/plat-mxc/devices/Makefile
> create mode 100644 arch/arm/plat-mxc/devices/platform-flexcan.c
> create mode 100644 arch/arm/plat-mxc/devices/platform-imx-i2c.c
> create mode 100644 arch/arm/plat-mxc/devices/platform-imx-uart.c
> create mode 100644 arch/arm/plat-mxc/devices/platform-mxc_nand.c
> create mode 100644 arch/arm/plat-mxc/devices/platform-spi_imx.c
> create mode 100644 arch/arm/plat-mxc/include/mach/3ds_debugboard.h
> delete mode 100644 arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
> delete mode 100644 arch/arm/plat-mxc/include/mach/board-kzmarm11.h
> delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx21ads.h
> delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27ads.h
> delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27lite.h
> delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27pdk.h
> delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
> delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx31ads.h
> delete mode 100644 arch/arm/plat-mxc/include/mach/board-qong.h
> create mode 100644 arch/arm/plat-mxc/include/mach/devices-common.h
> rename arch/arm/plat-mxc/include/mach/{board-eukrea_cpuimx27.h =>
> eukrea-baseboards.h} (64%)
> create mode 100644 arch/arm/plat-mxc/include/mach/mx2_cam.h
> create mode 100644 arch/arm/plat-nomadik/include/plat/pincfg.h
> delete mode 100644 arch/arm/plat-omap/include/plat/dsp_common.h
> create mode 100644 arch/arm/plat-versatile/leds.c
> create mode 100644 debian.linaro/NOTES
> create mode 100644 debian.linaro/abi/2.6.35-1004.9/abiname
> create mode 100644 debian.linaro/abi/2.6.35-1004.9/armel/linaro-mx51
> create mode 100644 debian.linaro/abi/2.6.35-1004.9/armel/linaro-mx51.modules
> create mode 100644 debian.linaro/abi/2.6.35-1004.9/armel/linaro-omap
> create mode 100644 debian.linaro/abi/2.6.35-1004.9/armel/linaro-omap.modules
> create mode 100644 debian.linaro/abi/2.6.35-1004.9/armel/linaro-vexpress
> create mode 100644
> debian.linaro/abi/2.6.35-1004.9/armel/linaro-vexpress.modules
> create mode 100644 debian.linaro/abi/perm-blacklist
> create mode 100644 debian.linaro/changelog
> create mode 100644 debian.linaro/changelog.historical
> create mode 100644 debian.linaro/config/armel/config.common.armel
> create mode 100644 debian.linaro/config/armel/config.flavour.linaro-mx51
> create mode 100644 debian.linaro/config/armel/config.flavour.linaro-omap
> create mode 100644 debian.linaro/config/armel/config.flavour.linaro-vexpress
> create mode 100644 debian.linaro/config/config.common.ports
> create mode 100644 debian.linaro/config/config.common.ubuntu
> create mode 100644 debian.linaro/config/enforce
> create mode 100644 debian.linaro/control.d/flavour-control.stub
> create mode 100644 debian.linaro/control.d/vars.linaro-mx51
> create mode 100644 debian.linaro/control.d/vars.linaro-omap
> create mode 100644 debian.linaro/control.d/vars.linaro-vexpress
> create mode 100644 debian.linaro/control.stub.in
> create mode 100644 debian.linaro/copyright
> create mode 100644 debian.linaro/d-i/firmware/README.txt
> create mode 100644 debian.linaro/d-i/kernel-versions.in
> create mode 100644 debian.linaro/d-i/modules/block-modules
> create mode 100644 debian.linaro/d-i/modules/crypto-modules
> create mode 100644 debian.linaro/d-i/modules/fat-modules
> create mode 100644 debian.linaro/d-i/modules/fs-core-modules
> create mode 100644 debian.linaro/d-i/modules/fs-secondary-modules
> create mode 100644 debian.linaro/d-i/modules/input-modules
> create mode 100644 debian.linaro/d-i/modules/irda-modules
> create mode 100644 debian.linaro/d-i/modules/md-modules
> create mode 100644 debian.linaro/d-i/modules/mouse-modules
> create mode 100644 debian.linaro/d-i/modules/nfs-modules
> create mode 100644 debian.linaro/d-i/modules/nic-modules
> create mode 100644 debian.linaro/d-i/modules/nic-shared-modules
> create mode 100644 debian.linaro/d-i/modules/nic-usb-modules
> create mode 100644 debian.linaro/d-i/modules/parport-modules
> create mode 100644 debian.linaro/d-i/modules/plip-modules
> create mode 100644 debian.linaro/d-i/modules/ppp-modules
> create mode 100644 debian.linaro/d-i/modules/sata-modules
> create mode 100644 debian.linaro/d-i/modules/scsi-modules
> create mode 100644 debian.linaro/d-i/modules/squashfs-modules
> create mode 100644 debian.linaro/d-i/modules/storage-core-modules
> create mode 100644 debian.linaro/d-i/modules/usb-modules
> create mode 100644 debian.linaro/d-i/modules/vlan-modules
> create mode 100644 debian.linaro/d-i/package-list
> create mode 100644 debian.linaro/etc/getabis
> create mode 100644 debian.linaro/etc/kernelconfig
> create mode 100644 debian.linaro/rules.d/armel.mk
> create mode 100644 drivers/leds/leds-ns2.c
> create mode 100644 drivers/media/video/mx2_camera.c
> create mode 100644 drivers/misc/arm-charlcd.c
> create mode 100644 include/linux/marvell_phy.h
> create mode 100644 tools/perf/arch/arm/Makefile
> create mode 100644 tools/perf/arch/arm/util/dwarf-regs.c
uploaded
--
Tim Gardner tim.gardner at canonical.com
More information about the kernel-team
mailing list