[Maverick SRU][PATCH] UBUNTU: SAUCE - ARM: Add DSS2 support for Overo board
Mathieu Poirier
mathieu.poirier at canonical.com
Wed Oct 20 23:25:58 UTC 2010
On Wed, 2010-10-20 at 13:01 -0700, Leann Ogasawara wrote:
> On Fri, 2010-10-15 at 10:56 -0600, Mathieu Poirier wrote:
> > SRU Justification
> >
> > Impact: A power regulator named "vdds_sdi" is missing from the board
> > setup file, preventing the display sudbsystem from initializing
> > properly, something that impacts omapfb and yields a blank screen. DSS2
> > related platform data are also missing.
> >
> > Fix: The fix consist in adding a "vdds_sdi" regulator declaration and
> > DSS2 platform device declaration and linking them to the
> > twl4030_platform data.
> >
> > Testcase: There is no dvi output if the patch isn't applied.
> >
> >
> > >From c40d340579a97b25f29358e4f1557e3c81d675d2 Mon Sep 17 00:00:00 2001
> > From: Mathieu J. Poirier <mathieu.poirier at canonical.com>
> > Date: Fri, 15 Oct 2010 10:15:55 -0600
> > Subject: [PATCH] UBUNTU - ARM: Add DSS2 support for Overo board
>
> Just a minor nit pick. I'd suggest crafting your patch's actual commit
> title to follow the format as outlined in the StablePatchFormat wiki:
>
> https://wiki.ubuntu.com/Kernel/Dev/StablePatchFormat
>
> eg. it should look something more like "UBUNTU: SAUCE: ARM: ...". It
> just makes it easier for whomever applies this patch to not have to
> manually fix up the title when they apply it. More below ...
>
> > Like the Beagle, EVM and IGEPv2 boads, the omapdss can't find the
> > "vdds_sdi" regulator, causing omapfb to exit prematurely and
> > yield a blank screen.
> >
> > This is based on the work found here, adjusted to leave out the
> > SPI mofications and apply/compile:
> > http://www.sakoman.com/cgi-bin/gitweb.cgi?p=linux-omap-2.6.git;a=shortlog;h=refs/heads/omap3-2.6.35
>
> I assume the original patch that this was referenced from is making it's
> way upstream?
The patch is in Steve Sakoman's 2.6.35 tree but hasn't been ported to
his 2.6.36 mainline nor submitted to mainline. I will touch base with
him to find out his intention.
>
> > BugLink: https://bugs.launchpad.net/bugs/660811
> >
> > Signed-off-by: Mathieu J Poirier <mathieu.poirier at canonical.com>
>
> The patch below appears to have multiple whitespace coding standard
> violations. eg. spaces instead of tabs, indentations should be 8
> characters wide (not 4), trailing whitespace, etc. I'd suggest running
> the patch through scripts/checkpatch.pl, fix up errors/warnings, and
> re-send.
>
> Thanks,
> Leann
>
> > ---
> > arch/arm/mach-omap2/board-overo.c | 134 +++++++++++++++++++++++++++++-------
> > 1 files changed, 108 insertions(+), 26 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
> > index 79ac414..1100d0e 100644
> > --- a/arch/arm/mach-omap2/board-overo.c
> > +++ b/arch/arm/mach-omap2/board-overo.c
> > @@ -40,6 +40,7 @@
> >
> > #include <plat/board.h>
> > #include <plat/common.h>
> > +#include <plat/display.h>
> > #include <mach/gpio.h>
> > #include <plat/gpmc.h>
> > #include <mach/hardware.h>
> > @@ -139,16 +140,6 @@ static struct resource overo_smsc911x_resources[] = {
> > },
> > };
> >
> > -static struct resource overo_smsc911x2_resources[] = {
> > - {
> > - .name = "smsc911x2-memory",
> > - .flags = IORESOURCE_MEM,
> > - },
> > - {
> > - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
> > - },
> > -};
> > -
> > static struct smsc911x_platform_config overo_smsc911x_config = {
> > .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
> > .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
> > @@ -196,6 +187,81 @@ static inline void __init overo_init_smsc911x(void)
> > static inline void __init overo_init_smsc911x(void) { return; }
> > #endif
> >
> > +/* DSS */
> > +static int lcd_enabled;
> > +static int dvi_enabled;
> > +
> > +#define OVERO_GPIO_LCD_EN 144
> > +#define OVERO_GPIO_LCD_BL 145
> > +
> > +static void __init overo_display_init(void)
> > +{
> > + if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) &&
> > + (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0))
> > + gpio_export(OVERO_GPIO_LCD_EN, 0);
> > + else
> > + printk(KERN_ERR "could not obtain gpio for "
> > + "OVERO_GPIO_LCD_EN\n");
> > +
> > + if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) &&
> > + (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0))
> > + gpio_export(OVERO_GPIO_LCD_BL, 0);
> > + else
> > + printk(KERN_ERR "could not obtain gpio for "
> > + "OVERO_GPIO_LCD_BL\n");
> > +}
> > +
> > +static int overo_panel_enable_dvi(struct omap_dss_device *dssdev)
> > +{
> > + if (lcd_enabled) {
> > + printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
> > + return -EINVAL;
> > + }
> > + dvi_enabled = 1;
> > +
> > + return 0;
> > +}
> > +
> > +static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
> > +{
> > + dvi_enabled = 0;
> > +}
> > +
> > +static struct omap_dss_device overo_dvi_device = {
> > + .type = OMAP_DISPLAY_TYPE_DPI,
> > + .name = "dvi",
> > + .driver_name = "generic_panel",
> > + .phy.dpi.data_lines = 24,
> > + .platform_enable = overo_panel_enable_dvi,
> > + .platform_disable = overo_panel_disable_dvi,
> > +};
> > +
> > +static struct omap_dss_device *overo_dss_devices[] = {
> > + &overo_dvi_device,
> > +};
> > +
> > +static struct omap_dss_board_info overo_dss_data = {
> > + .num_devices = ARRAY_SIZE(overo_dss_devices),
> > + .devices = overo_dss_devices,
> > + .default_device = &overo_dvi_device,
> > +};
> > +
> > +static struct platform_device overo_dss_device = {
> > + .name = "omapdss",
> > + .id = -1,
> > + .dev = {
> > + .platform_data = &overo_dss_data,
> > + },
> > +};
> > +
> > +static struct regulator_consumer_supply overo_vdda_dac_supply =
> > + REGULATOR_SUPPLY("vdda_dac", "omapdss");
> > +
> > +static struct regulator_consumer_supply overo_vdds_supplies[] = {
> > + REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
> > + REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
> > +};
> > +
> > static struct mtd_partition overo_nand_partitions[] = {
> > {
> > .name = "xloader",
> > @@ -341,6 +407,34 @@ static struct regulator_init_data overo_vmmc1 = {
> > .consumer_supplies = &overo_vmmc1_supply,
> > };
> >
> > +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
> > +static struct regulator_init_data overo_vdac = {
> > + .constraints = {
> > + .min_uV = 1800000,
> > + .max_uV = 1800000,
> > + .valid_modes_mask = REGULATOR_MODE_NORMAL
> > + | REGULATOR_MODE_STANDBY,
> > + .valid_ops_mask = REGULATOR_CHANGE_MODE
> > + | REGULATOR_CHANGE_STATUS,
> > + },
> > + .num_consumer_supplies = 1,
> > + .consumer_supplies = &overo_vdda_dac_supply,
> > +};
> > +
> > +/* VPLL2 for digital video outputs */
> > +static struct regulator_init_data overo_vpll2 = {
> > + .constraints = {
> > + .min_uV = 1800000,
> > + .max_uV = 1800000,
> > + .valid_modes_mask = REGULATOR_MODE_NORMAL
> > + | REGULATOR_MODE_STANDBY,
> > + .valid_ops_mask = REGULATOR_CHANGE_MODE
> > + | REGULATOR_CHANGE_STATUS,
> > + },
> > + .num_consumer_supplies = ARRAY_SIZE(overo_vdds_supplies),
> > + .consumer_supplies = overo_vdds_supplies,
> > +};
> > +
> > static struct twl4030_codec_audio_data overo_audio_data = {
> > .audio_mclk = 26000000,
> > };
> > @@ -359,6 +453,8 @@ static struct twl4030_platform_data overo_twldata = {
> > .usb = &overo_usb_data,
> > .codec = &overo_codec_data,
> > .vmmc1 = &overo_vmmc1,
> > + .vdac = &overo_vdac,
> > + .vpll2 = &overo_vpll2,
> > };
> >
> > static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
> > @@ -379,23 +475,8 @@ static int __init overo_i2c_init(void)
> > return 0;
> > }
> >
> > -static struct platform_device overo_lcd_device = {
> > - .name = "overo_lcd",
> > - .id = -1,
> > -};
> > -
> > -static struct omap_lcd_config overo_lcd_config __initdata = {
> > - .ctrl_name = "internal",
> > -};
> > -
> > -static struct omap_board_config_kernel overo_config[] __initdata = {
> > - { OMAP_TAG_LCD, &overo_lcd_config },
> > -};
> > -
> > static void __init overo_init_irq(void)
> > {
> > - omap_board_config = overo_config;
> > - omap_board_config_size = ARRAY_SIZE(overo_config);
> > omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
> > mt46h32m32lf6_sdrc_params);
> > omap_init_irq();
> > @@ -403,7 +484,7 @@ static void __init overo_init_irq(void)
> > }
> >
> > static struct platform_device *overo_devices[] __initdata = {
> > - &overo_lcd_device,
> > + &overo_dss_device,
> > };
> >
> > static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
> > @@ -442,6 +523,7 @@ static void __init overo_init(void)
> > usb_ehci_init(&ehci_pdata);
> > overo_ads7846_init();
> > overo_init_smsc911x();
> > + overo_display_init();
> >
> > /* Ensure SDRC pins are mux'd for self-refresh */
> > omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
> > --
> > 1.7.0.4
> >
> >
> >
> >
>
>
More information about the kernel-team
mailing list