[Maverick SRU][PATCH] UBUNTU: SAUCE: ARM: Add DSS2 support for Overo board
Mathieu Poirier
mathieu.poirier at canonical.com
Wed Oct 20 22:54:19 UTC 2010
SRU Justification
Impact: A power regulator named "vdds_sdi" is missing from the board
setup file, preventing the display sudbsystem from initializing
properly, something that impacts omapfb and yields a blank screen. DSS2
related platform data are also missing.
Fix: The fix consist in adding a "vdds_sdi" regulator declaration and
DSS2 platform device declaration and linking them to the
twl4030_platform data.
Testcase: There is no dvi output if the patch isn't applied.
>From 31ae28024cb8a54748a7e4ffb80ae41ea8b3e625 Mon Sep 17 00:00:00 2001
From: Mathieu J. Poirier <mathieu.poirier at canonical.com>
Date: Wed, 20 Oct 2010 16:43:54 -0600
Subject: [PATCH] UBUNTU: SAUCE: ARM: Add DSS2 support for Overo board
Like the Beagle, EVM and IGEPv2 boads, the omapdss can't find the
"vdds_sdi" regulator, causing omapfb to exit prematurely and
yield a blank screen.
This is based on the work found here, adjusted to leave out the
SPI mofications and apply/compile:
http://www.sakoman.com/cgi-bin/gitweb.cgi?p=linux-omap-2.6.git;a=shortlog;h=refs/heads/omap3-2.6.35
BugLink: https://bugs.launchpad.net/bugs/660811
Signed-off-by: Mathieu J Poirier <mathieu.poirier at canonical.com>
---
arch/arm/mach-omap2/board-overo.c | 134 +++++++++++++++++++++++++++++-------
1 files changed, 108 insertions(+), 26 deletions(-)
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 79ac414..82ae2ec 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -40,6 +40,7 @@
#include <plat/board.h>
#include <plat/common.h>
+#include <plat/display.h>
#include <mach/gpio.h>
#include <plat/gpmc.h>
#include <mach/hardware.h>
@@ -139,16 +140,6 @@ static struct resource overo_smsc911x_resources[] = {
},
};
-static struct resource overo_smsc911x2_resources[] = {
- {
- .name = "smsc911x2-memory",
- .flags = IORESOURCE_MEM,
- },
- {
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
static struct smsc911x_platform_config overo_smsc911x_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
@@ -196,6 +187,81 @@ static inline void __init overo_init_smsc911x(void)
static inline void __init overo_init_smsc911x(void) { return; }
#endif
+/* DSS */
+static int lcd_enabled;
+static int dvi_enabled;
+
+#define OVERO_GPIO_LCD_EN 144
+#define OVERO_GPIO_LCD_BL 145
+
+static void __init overo_display_init(void)
+{
+ if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) &&
+ (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0))
+ gpio_export(OVERO_GPIO_LCD_EN, 0);
+ else
+ printk(KERN_ERR "could not obtain gpio for "
+ "OVERO_GPIO_LCD_EN\n");
+
+ if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) &&
+ (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0))
+ gpio_export(OVERO_GPIO_LCD_BL, 0);
+ else
+ printk(KERN_ERR "could not obtain gpio for "
+ "OVERO_GPIO_LCD_BL\n");
+}
+
+static int overo_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+ if (lcd_enabled) {
+ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+ return -EINVAL;
+ }
+ dvi_enabled = 1;
+
+ return 0;
+}
+
+static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+ dvi_enabled = 0;
+}
+
+static struct omap_dss_device overo_dvi_device = {
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .name = "dvi",
+ .driver_name = "generic_panel",
+ .phy.dpi.data_lines = 24,
+ .platform_enable = overo_panel_enable_dvi,
+ .platform_disable = overo_panel_disable_dvi,
+};
+
+static struct omap_dss_device *overo_dss_devices[] = {
+ &overo_dvi_device,
+};
+
+static struct omap_dss_board_info overo_dss_data = {
+ .num_devices = ARRAY_SIZE(overo_dss_devices),
+ .devices = overo_dss_devices,
+ .default_device = &overo_dvi_device,
+};
+
+static struct platform_device overo_dss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .platform_data = &overo_dss_data,
+ },
+};
+
+static struct regulator_consumer_supply overo_vdda_dac_supply =
+ REGULATOR_SUPPLY("vdda_dac", "omapdss");
+
+static struct regulator_consumer_supply overo_vdds_supplies[] = {
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
+};
+
static struct mtd_partition overo_nand_partitions[] = {
{
.name = "xloader",
@@ -341,6 +407,34 @@ static struct regulator_init_data overo_vmmc1 = {
.consumer_supplies = &overo_vmmc1_supply,
};
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data overo_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &overo_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data overo_vpll2 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(overo_vdds_supplies),
+ .consumer_supplies = overo_vdds_supplies,
+};
+
static struct twl4030_codec_audio_data overo_audio_data = {
.audio_mclk = 26000000,
};
@@ -359,6 +453,8 @@ static struct twl4030_platform_data overo_twldata = {
.usb = &overo_usb_data,
.codec = &overo_codec_data,
.vmmc1 = &overo_vmmc1,
+ .vdac = &overo_vdac,
+ .vpll2 = &overo_vpll2,
};
static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
@@ -379,23 +475,8 @@ static int __init overo_i2c_init(void)
return 0;
}
-static struct platform_device overo_lcd_device = {
- .name = "overo_lcd",
- .id = -1,
-};
-
-static struct omap_lcd_config overo_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
-static struct omap_board_config_kernel overo_config[] __initdata = {
- { OMAP_TAG_LCD, &overo_lcd_config },
-};
-
static void __init overo_init_irq(void)
{
- omap_board_config = overo_config;
- omap_board_config_size = ARRAY_SIZE(overo_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
@@ -403,7 +484,7 @@ static void __init overo_init_irq(void)
}
static struct platform_device *overo_devices[] __initdata = {
- &overo_lcd_device,
+ &overo_dss_device,
};
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
@@ -442,6 +523,7 @@ static void __init overo_init(void)
usb_ehci_init(&ehci_pdata);
overo_ads7846_init();
overo_init_smsc911x();
+ overo_display_init();
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
--
1.7.0.4
More information about the kernel-team
mailing list