linux-linaro pull request
Tim Gardner
tim.gardner at canonical.com
Wed Oct 20 19:39:38 UTC 2010
On 10/20/2010 12:47 PM, John Rigby wrote:
> The following changes since commit 7f3eb8c4168e2e7be23f01c4fc2f5a5ce7b0c096:
>
> LINARO: Linaro-2.6.35-1007.13 (2010-10-11 10:36:47 -0600)
>
> are available in the git repository at:
> git://git.linaro.org/ubuntu/linux-linaro.git linaro-2.6.35-1008.14
>
> Al Viro (1):
> arm: fix really nasty sigreturn bug
>
> Alan Ott (1):
> HID: Set Report ID properly for Output reports on the Control endpoint.
>
> Alex Deucher (6):
> drm/radeon/kms: fix a regression on r7xx AGP due to the HDP flush fix
> drm/radeon/kms: force legacy pll algo for RV515 LVDS
> drm/radeon/kms: force legacy pll algo for RV620 LVDS
> drm/radeon/kms: properly set crtc high base on r7xx
> drm/radeon/kms/evergreen: fix gpu hangs in userspace accel code
> drm/radeon/kms/evergreen: fix backend setup
>
> Alexey Kuznetsov (1):
> tcp: Prevent overzealous packetization by SWS logic.
>
> Amit Shah (1):
> virtio: console: Prevent userspace from submitting NULL buffers
>
> Andrea Arcangeli (3):
> mm: fix swapin race condition
> mmap: call unlink_anon_vmas() in __split_vma() in case of error
> KVM: MMU: fix mmu notifier invalidate handler for huge spte
>
> Andreas Herrmann (1):
> hwmon: (k8temp) Differentiate between AM2 and ASB1
>
> Andrew Morton (1):
> drivers/pci/intel-iommu.c: fix build with older gcc's
>
> Andy Gospodarek (1):
> bonding: correctly process non-linear skbs
>
> Andy Whitcroft (1):
> UBUNTU: reduce disk usage during buildd builds
>
> Anton Vorontsov (4):
> apm_power: Add missing break statement
> sdhci-pltfm: switch to module device table matching
> sdhci-pltfm: reorganize Makefile entries to support SoC devices
> sdhci-pltfm: add support for CNS3xxx SoC devices
>
> Arnd Bergmann (1):
> /proc/vmcore: fix seeking
>
> Avi Kivity (3):
> KVM: Keep slot ID in memory slot structure
> KVM: Prevent internal slots from being COWed
> KVM: VMX: Fix host GDT.LIMIT corruption
>
> Axel Lin (1):
> hwmon: (ads7871) Fix ads7871_probe error paths
>
> Ben Hutchings (3):
> PCI: MSI: Remove unsafe and unnecessary hardware access
> PCI: MSI: Restore read_msi_msg_desc(); add get_cached_msi_msg_desc()
> Staging: rt2870sta: Add more device IDs from vendor drivers
>
> Benjamin Herrenschmidt (1):
> Revert "Input: appletouch - fix integer overflow issue"
>
> Brian Austin (1):
> ALSA: hda - Add errata initverb sequence for CS42xx codecs
>
> Chris Wilson (8):
> agp/intel: Promote warning about failure to setup flush to error.
> drm/i915/dp: Really try 5 times before giving up.
> drm/i915: Allocate the PCI resource for the MCHBAR
> drm/i915: Prevent double dpms on
> Revert "drm/i915: Allow LVDS on pipe A on gen4+"
> drm: Only decouple the old_fb from the crtc is we call mode_set*
> drm/i915,agp/intel: Add second set of PCI-IDs for B43
> drm/i915: Ensure that the crtcinfo is populated during mode_fixup()
>
> Chris Wright (1):
> tracing: t_start: reset FTRACE_ITER_HASH in case of seek/pread
>
> Christian Lamparter (1):
> p54: fix tx feedback status flag check
>
> Christoph Hellwig (3):
> direct-io: move aio_complete into ->end_io
> xfs: move aio completion after unwritten extent conversion
> swap: do not send discards as barriers
>
> Christoph Lameter (1):
> mm: page allocator: calculate a better estimate of NR_FREE_PAGES
> when memory is low and kswapd is awake
>
> Clemens Ladisch (3):
> ALSA: usb-audio: fix detection of vendor-specific device protocol settings
> ALSA: virtuoso: work around missing reset in the Xonar DS Windows driver
> ALSA: virtuoso: fix setting of Xonar DS line-in/mic-in controls
>
> Colin Cross (1):
> PM: Prevent waiting forever on asynchronous resume after failing suspend
>
> Colin Ian King (1):
> (pre-stable) ACPI: enable repeated PCIEXP wakeup by clearing
> PCIEXP_WAKE_STS on resume
>
> Craig Shelley (1):
> USB: CP210x Add new device ID
>
> Dan Carpenter (7):
> USB: ehci-ppc-of: problems in unwind
> sysfs: checking for NULL instead of ERR_PTR
> irda: off by one
> i915: return -EFAULT if copy_to_user fails
> i915_gem: return -EFAULT if copy_to_user fails
> Staging: vt6655: fix buffer overflow
> net/llc: make opt unsigned in llc_ui_setsockopt()
>
> Dan Rosenberg (8):
> USB: serial/mos*: prevent reading uninitialized stack memory
> drivers/net/usb/hso.c: prevent reading uninitialized memory
> drivers/net/cxgb3/cxgb3_main.c: prevent reading uninitialized stack memory
> drivers/net/eql.c: prevent reading uninitialized stack memory
> drivers/video/sis/sis_main.c: prevent reading uninitialized stack memory
> Prevent freeing uninitialized pointer in compat_do_readv_writev
> xfs: prevent reading uninitialized stack memory
> drivers/video/via/ioctl.c: prevent reading uninitialized stack memory
>
> Daniel J Blueman (1):
> Fix unprotected access to task credentials in waitid()
>
> Daniel Mack (1):
> ALSA: usb-audio: Assume first control interface is for audio
>
> Daniel Vetter (1):
> drm/i915: overlay on gen2 can't address above 1G
>
> Dave Chinner (3):
> xfs: fix untrusted inode number lookup
> xfs: ensure we mark all inodes in a freed cluster XFS_ISTALE
> writeback: write_cache_pages doesn't terminate at nr_to_write<= 0
>
> Dave Ludlow (2):
> usb: serial: mos7840: Add USB ID to support the B&B Electronics
> USOPTL4-2P.
> usb: serial: mos7840: Add USB IDs to support more B&B USB/RS485
> converters.
>
> David Henningsson (5):
> ALSA: HDA: Use model=auto for LG R510
> ALSA: hda - Rename iMic to Int Mic on Lenovo NB0763
> ALSA: hda - Add a new hp-laptop model for Conexant 5066, tested on HP G60
> ALSA: HDA: Enable internal speaker on Dell M101z
> ALSA: HDA: Correctly apply position_fix quirks for ATI and VIA controllers
>
> David S. Miller (4):
> bridge: Clear INET control block of SKBs passed into ip_fragment().
> net: RPS needs to depend upon USE_GENERIC_SMP_HELPERS
> tcp: Combat per-cpu skew in orphan tests.
> sparc64: Get rid of indirect p1275 PROM call buffer.
>
> David Vrabel (1):
> mmc: avoid getting CID on SDIO-only cards
>
> Dmitry Torokhov (2):
> Input: i8042 - fix device removal on unload
> Input: i8042 - reset keyboard controller wehen resuming from S2R
>
> Enric Balletbo i Serra (6):
> UBUNTU: ARM: igepv2: Adding support for VBUS and overcurrent
> UBUNTU: ARM: igepv2: Fix and improve LED handling
> UBUNTU: ARM: igepv2: Introduce function to dectect HW version
> UBUNTU: ARM: igepv2: Fix handling of GPIOs for WLAN-BT combo
> UBUNTU: ARM: igepv2: Add i2c eeprom driver to read EDID
> UBUNTU: ARM: igepv2: Remove VMMC2 regulator
>
> Eric Dumazet (5):
> gro: fix different skb headrooms
> rds: fix a leak of kernel memory
> tcp: fix three tcp sysctls tuning
> udp: add rehash on connect()
> l2tp: test for ethernet header in l2tp_eth_dev_recv()
>
> Eric Paris (1):
> inotify: send IN_UNMOUNT events
>
> Ethan Du (1):
> omap hsmmc: fix a racing case between kmmcd and omap_hsmmc_suspend
>
> Felipe Contreras (1):
> video: omap: vram: remove from normal memory
>
> Florian Westphal (1):
> netfilter: fix CONFIG_COMPAT support
>
> Frederic Weisbecker (1):
> perf: Initialize callchains roots's childen hits
>
> Gary King (1):
> bounce: call flush_dcache_page() after bounce_copy_vec()
>
> Gleb Natapov (1):
> KVM: x86: emulator: inc/dec can have lock prefix
>
> Greg Kroah-Hartman (3):
> Linux 2.6.35.5
> Linux 2.6.35.6
> Linux 2.6.35.7
>
> Guennadi Liakhovetski (1):
> mmc: fix the use of kunmap_atomic() in tmio_mmc.h
>
> Guillem Jover (2):
> hwmon: (f75375s) Shift control mode to the correct bit position
> hwmon: (f75375s) Do not overwrite values read from registers
>
> Haiyang Zhang (2):
> staging: hv: Fix missing functions for net_device_ops
> staging: hv: Fixed the value of the 64bit-hole inside ring buffer
>
> Hank Janssen (3):
> staging: hv: Fixed bounce kmap problem by using correct index
> staging: hv: Increased storvsc ringbuffer and max_io_requests
> staging: hv: Fixed lockup problem with bounce_buffer scatter list
>
> Hans de Goede (1):
> virtio: console: Fix poll blocking even though there is data to read
>
> Hanumath Prasad (1):
> mmc: only set blockaddressed for> 2GiB cards
>
> Hugh Dickins (3):
> swap: prevent reuse during hibernation
> swap: discard while swapping only if SWAP_FLAG_DISCARD
> mm: further fix swapin race condition
>
> James Dingwall (1):
> Xen: fix typo in previous patch
>
> Jan Kara (3):
> bdi: Initialize noop_backing_dev_info properly
> char: Mark /dev/zero and /dev/kmem as not capable of writeback
> aio: do not return ERESTARTSYS as a result of AIO
>
> Jan Sembera (1):
> binfmt_misc: fix binfmt_misc priority
>
> Jarek Poplawski (1):
> gro: Re-fix different skb headrooms
>
> Jason Detring (1):
> USB: cp210x: Add B&G H3000 link cable ID
>
> Jeff Layton (1):
> cifs: fix potential double put of TCP session reference
>
> Jeff Moyer (2):
> O_DIRECT: fix the splitting up of contiguous I/O
> aio: check for multiplication overflow in do_io_submit
>
> Jeremy Fitzhardinge (2):
> xen: handle events as edge-triggered
> xen: use percpu interrupts for IPIs and VIRQs
>
> Jerome Marchand (1):
> kernel/groups.c: fix integer overflow in groups_search
>
> Jesse Barnes (1):
> drm/i915: don't enable self-refresh on Ironlake
>
> Jianzhao Wang (1):
> net: blackhole route should always be recalculated
>
> Jiaying Zhang (1):
> ext4: move aio completion after unwritten extent conversion
>
> Johannes Berg (1):
> mac80211: delete work timer
>
> John Rigby (7):
> Revert "OMAP: DSS2: OMAPFB: use phys_to_virt for RAM mappings"
> LINARO: Start new release
> Merge remote branch 'linux-linaro-2.6.35/master' into linaro
> Merge remote branch 'ubuntu-maverick/master' into linaro
> LINARO: Update configs
> LINARO: Bump abi
> LINARO: Linaro-2.6.35-1008.14
>
> John W. Linville (1):
> ath5k: check return value of ieee80211_get_tx_rate
>
> Jorge Boncompte [DTI2] (1):
> minix: fix regression in minix_mkdir()
>
> Julia Lawall (1):
> drivers/mmc/host/imxmmc.c: adjust confusing if indentation
>
> KAMEZAWA Hiroyuki (1):
> memory hotplug: fix next block calculation in is_removable
>
> KOSAKI Motohiro (1):
> tcp: select(writefds) don't hang up when a peer close connection
>
> Kishore Kadiyala (1):
> mmc: omap: fix for bus width which improves SD card's peformance.
>
> Kyungmin Park (5):
> mmc: recognize CSD structure
> sdhci: remove useless set_clock() check
> sdhci: 8-bit data transfer width support
> sdhci: don't assign mmc->caps at SDHCI directly
> sdhci: add no hi-speed bit quirk support
>
> Leann Ogasawara (15):
> UBUNTU: Ubuntu-2.6.35-22.34
> UBUNTU: Start new release
> UBUNTU: Bump ABI
> UBUNTU: ARM: Temporarily disable module check for armel
> Revert "(pre-stable) ALSA: HDA: Use model=auto for LG R510"
> Revert "(pre-stable) ALSA: hda - Rename iMic to Int Mic on Lenovo NB0763"
> Revert "ALSA: hda - Handle pin NID 0x1a on ALC259/269"
> Revert "ALSA: hda - Handle missing NID 0x1b on ALC259 codec"
> Revert "(pre-stable) ALSA: hda - Add a new hp-laptop model for
> Conexant 5066, tested on HP G60"
> Revert "mmc: build fix: mmc_pm_notify is only available with CONFIG_PM=y"
> Revert "mmc: fix all hangs related to mmc/sd card insert/removal
> during suspend/resume"
> Revert "(pre-stable) bounce: call flush_dcache_page() after
> bounce_copy_vec()"
> Revert "Input: i8042 - reset keyboard controller wehen resuming from S2R"
> Revert "ALSA: HDA: Enable internal speaker on Dell M101z"
> Revert "(pre-stable) drm/i915: don't enable self-refresh on Ironlake"
>
> Li Zefan (1):
> tracing: Fix a race in function profile
>
> Lin Ming (1):
> perf, x86, Pentium4: Clear the P4_CCCR_FORCE_OVF flag
>
> Luca Barbieri (1):
> x86, asm: Use a lower case name for the end macro in atomic64_386_32.S
>
> Luis R. Rodriguez (2):
> ath9k_hw: Fix EEPROM uncompress block reading on AR9003
> ath9k_hw: fix parsing of HT40 5 GHz CTLs
>
> Luke Lowrey (1):
> USB: ftdi_sio: Added custom PIDs for ChamSys products
>
> Marcin Slusarz (1):
> drm/nv50: initialize ramht_refs list for faked 0 channel
>
> Marek Szyprowski (1):
> sdhci: add regulator support
>
> Mark Lord (2):
> libata-sff: remove harmful BUG_ON from ata_bmdma_qc_issue
> sata_mv: fix broken DSM/TRIM support (v2)
>
> Mathias Nyman (1):
> usb: musb_debugfs: don't use the struct file private_data field
> with seq_files
>
> Matt Helsley (1):
> hw breakpoints: Fix pid namespace bug
>
> Maurus Cuelenaere (1):
> UBUNTU: SAUCE: ARM: OMAP3: Add S-Video output to IGEPv2 board
>
> Maxim Levitsky (1):
> mmc: fix all hangs related to mmc/sd card insert/removal during
> suspend/resume
>
> Maxim Osipov (1):
> USB: Fix kernel oops with g_ether and Windows
>
> Mel Gorman (2):
> mm: page allocator: drain per-cpu lists after direct reclaim
> allocation fails
> mm: page allocator: update free page counters after pages are
> placed on the free list
>
> Menyhart Zoltan (1):
> statfs() gives ESTALE error
>
> Michael Cree (1):
> alpha: Fix printk format errors
>
> Michal Miroslaw (2):
> mmc: split mmc_sd_init_card()
> mmc: implement SD-combo (IO+mem) support
>
> Miklos Szeredi (1):
> fuse: flush background queue on connection close
>
> Mimi Zohar (1):
> ima: always maintain counters
>
> Minchan Kim (2):
> mm: compaction: handle active and inactive fairly in too_many_isolated
> vmscan: check all_unreclaimable in direct reclaim path
>
> Morten H. Larsen (1):
> Fix call to replaced SuperIO functions
>
> Nicolas Ferre (1):
> AT91: change dma resource index
>
> Patrick Simmons (1):
> oprofile: Add Support for Intel CPU Family 6 / Model 22 (Intel
> Celeron 540)
>
> Paul E. McKenney (1):
> pid: make setpgid() system call use RCU read-side critical section
>
> Paul Mackerras (1):
> powerpc/perf_event: Reduce latency of calling perf_event_do_pending
>
> Peter Oberparleiter (1):
> gcov: fix null-pointer dereference for certain module types
>
> Peter Zijlstra (1):
> x86, tsc: Fix a preemption leak in restore_sched_clock_state()
>
> Petr Tesarik (1):
> IA64: Optimize ticket spinlocks in fsys_rt_sigprocmask
>
> Philippe Corbes (1):
> USB: cdc-acm: Add pseudo modem without AT command capabilities
>
> Rafael J. Wysocki (1):
> PM / Hibernate: Avoid hitting OOM during preallocation of memory
>
> Ricardo Salveti de Araujo (2):
> UBUNTU: [Config] Remove CONFIG_FIXED_PHY and move
> CONFIG_SMSC911X from m to y for omap
> UBUNTU: SAUCE: ARM: OMAP3: Adding vdd_sdi regulator supply to IGEPv2 board
>
> Robert Richter (3):
> oprofile: fix crash when accessing freed task structs
> oprofile, x86: fix init_sysfs error handling
> oprofile, x86: fix init_sysfs() function stub
>
> Russell King (1):
> ARM: fix section mismatch warnings in Versatile Express
>
> Russell King - ARM Linux (1):
> ARM: use memblock to remove memory from available memory
>
> Ryan Kuester (1):
> SCSI: mptsas: fix hangs caused by ATA pass-through
>
> Sergio Aguirre (1):
> omap_hsmmc: remove unused local `state'
>
> Shawn Guo (3):
> babbage: esdhc device registration
> mmc: quirk fix for timeout problem
> babbage: update mx51_defconfig
>
> Simon Arlott (1):
> USB: cxacru: Use a bulk/int URB to access the command endpoint
>
> Sonic Zhang (1):
> serial: bfin_sport_uart: restore transmit frame sync fix
>
> Stanislaw Gruszka (1):
> sched: Fix user time incorrectly accounted as system time on 32-bit
>
> Stephen Warren (1):
> ALSA: hda - patch_nvhdmi.c: Add missing codec IDs, unify names
>
> Steve Wise (1):
> RDMA/cxgb3: Don't exceed the max HW CQ depth
>
> Steven Rostedt (1):
> tracing: Do not allow llseek to set_ftrace_filter
>
> Steven Whitehouse (1):
> GFS2: gfs2_logd should be using interruptible waits
>
> Sunil Mushran (1):
> ocfs2: Fix incorrect checksum validation error
>
> Suresh Siddha (1):
> x86, tsc, sched: Recompute cyc2ns_offset's during resume from sleep states
>
> Takashi Iwai (7):
> (upstream) ALSA: hda - Apply ALC269 VAIO fix-up to all Sony
> laptops with ALC269
> ALSA: hda - Handle missing NID 0x1b on ALC259 codec
> ALSA: hda - Handle pin NID 0x1a on ALC259/269
> ALSA: usb - Release capture substream URBs properly
> ALSA: hda - Add quirk for Lenovo T400s
> ALSA: hda - Fix wrong HP pin detection in snd_hda_parse_pin_def_config()
> hp_accel: add quirks for HP ProBook 532x and HP Mini 5102
>
> Tejun Heo (5):
> pata_cmd64x: revert commit d62f5576
> libata: skip EH autopsy and recovery during suspend
> libata,pata_via: revert ata_wait_idle() removal from ata_sff/via_tf_load()
> ahci: fix hang on failed softreset
> percpu: fix pcpu_last_unit_cpu
>
> Tetsuo Handa (1):
> UNIX: Do not loop forever at unix_autobind().
>
> Thadeu Lima de Souza Cascardo (1):
> usb: allow drivers to use allocated bandwidth until unbound
>
> Thomas Gleixner (1):
> x86: hpet: Work around hardware stupidity
>
> Thomas Renninger (1):
> x86 platform drivers: hp-wmi Reorder event id processing
>
> Timo Juhani Lindfors (1):
> Make PTRACE_SINGLESTEP work with user helpers
>
> Toby Gray (2):
> USB: cdc-acm: Adding second ACM channel support for various
> Nokia and one Samsung phones
> USB: cdc-acm: Fixing crash when ACM probing interfaces with no
> endpoint descriptors.
>
> Tony Luck (2):
> IA64: fix siglock
> guard page for stacks that grow upwards
>
> Trond Myklebust (2):
> NFS: Fix a typo in nfs_sockaddr_match_ipaddr6
> SUNRPC: Fix race corrupting rpc upcall
>
> Uwe Kleine-König (1):
> mmc: build fix: mmc_pm_notify is only available with CONFIG_PM=y
>
> Venkatraman S (1):
> omap hsmmc: fix processing of all dma interrupts as block completion
>
> Vivek Natarajan (1):
> ath9k_htc: Fix disconnect issue in HT40 mode.
>
> Vlad Yasevich (1):
> sctp: Do not reset the packet during sctp_packet_config().
>
> Vladimir Zapolskiy (1):
> rtc: s3c: balance state changes of wakeup flag
>
> Wolfram Sang (6):
> mmc: sdhci-pltfm: Add structure for host-specific data
> mmc: sdhci-pltfm: move .h file into appropriate subdir
> mmc: sdhci: introduce get_ro private write-protect hook
> mmc: sdhci_pltfm: pass more data on custom init call
> mmc: sdhci-of-esdhc: factor out common stuff
> mmc: sdhci-pltfm: add -pltfm driver for imx35/51
>
> Xiao Guangrong (1):
> KVM: MMU: fix direct sp's access corrupted
>
> Yong Wang (1):
> hwmon: (emc1403) Remove unnecessary hwmon_device_unregister
>
> Yusuke Goda (1):
> tmio_mmc: don't clear unhandled pending interrupts
>
> Zhenyu Wang (3):
> drm/i915: Enable MI_FLUSH on Sandybridge
> agp/intel: fix physical address mask bits for sandybridge
> agp/intel: fix dma mask bits on sandybridge
>
> Makefile | 4 +-
> arch/arm/configs/mx51_defconfig | 12 +-
> arch/arm/kernel/ptrace.c | 4 +
> arch/arm/mach-mx5/Kconfig | 1 +
> arch/arm/mach-mx5/board-mx51_babbage.c | 20 +
> arch/arm/mach-mx5/clock-mx51.c | 278 ++-
> arch/arm/mach-mx5/devices-imx51.h | 17 +
> arch/arm/mach-omap2/board-igep0020.c | 360 ++-
> arch/arm/mach-vexpress/ct-ca9x4.c | 4 +-
> arch/arm/mach-vexpress/v2m.c | 2 +-
> arch/arm/mm/init.c | 160 +-
> arch/arm/mm/mmu.c | 43 +-
> arch/arm/plat-mxc/devices/Kconfig | 3 +
> arch/arm/plat-mxc/devices/Makefile | 1 +
> arch/arm/plat-mxc/devices/platform-esdhc.c | 71 +
> arch/arm/plat-mxc/include/mach/devices-common.h | 10 +
> arch/arm/plat-mxc/include/mach/esdhc.h | 16 +
> arch/arm/plat-mxc/include/mach/iomux-mx51.h | 39 +-
> arch/arm/plat-mxc/include/mach/mx51.h | 16 +-
> arch/arm/plat-omap/include/plat/vram.h | 1 -
> debian.linaro/abi/2.6.35-1006.12/abiname | 1 -
> debian.linaro/abi/2.6.35-1007.13/abiname | 1 +
> debian.linaro/abi/2.6.35-1007.13/armel/ignore | 1 +
> .../abi/2.6.35-1007.13/armel/ignore.modules | 1 +
> .../armel/linaro-mx51 | 1267 +++++-----
> .../armel/linaro-mx51.modules | 0
> .../armel/linaro-omap | 2579 ++++++++++----------
> .../armel/linaro-omap.modules | 0
> .../armel/linaro-vexpress | 1 +
> .../armel/linaro-vexpress.modules | 0
> debian.linaro/changelog | 76 +
> .../config/armel/config.flavour.linaro-mx51 | 4 +-
> .../config/armel/config.flavour.linaro-omap | 2 +-
> .../config/armel/config.flavour.linaro-vexpress | 2 +-
> debian.linaro/config/config.common.ubuntu | 5 +-
> .../abi/2.6.35-22.33/amd64/virtual.modules | 494 ----
> .../abi/2.6.35-22.33/i386/virtual.modules | 492 ----
> .../abi/{2.6.35-22.33 => 2.6.35-22.34}/abiname | 0
> .../{2.6.35-22.33 => 2.6.35-22.34}/amd64/generic | 0
> .../amd64/generic.modules | 398 ++--
> .../{2.6.35-22.33 => 2.6.35-22.34}/amd64/server | 0
> .../amd64/server.modules | 398 ++--
> .../{2.6.35-22.33 => 2.6.35-22.34}/amd64/virtual | 0
> .../amd64/virtual.modules} | 400 ++--
> .../abi/2.6.35-22.34/armel/ignore.modules | 1 +
> .../abi/{2.6.35-22.33 => 2.6.35-22.34}/armel/omap | 0
> .../armel/omap.modules | 260 +-
> .../{2.6.35-22.33 => 2.6.35-22.34}/armel/versatile | 0
> .../armel/versatile.modules | 208 +-
> .../{2.6.35-22.33 => 2.6.35-22.34}/i386/generic | 0
> .../i386/generic-pae | 0
> .../i386/generic-pae.modules | 430 ++--
> .../i386/generic.modules | 428 ++--
> .../{2.6.35-22.33 => 2.6.35-22.34}/i386/virtual | 0
> .../i386/virtual.modules} | 432 ++--
> .../{2.6.35-22.33 => 2.6.35-22.34}/powerpc/powerpc | 0
> .../powerpc/powerpc-smp | 0
> .../powerpc/powerpc-smp.modules | 324 ++--
> .../powerpc/powerpc.modules | 322 ++--
> .../powerpc/powerpc64-smp | 0
> .../powerpc/powerpc64-smp.modules | 322 ++--
> debian.master/changelog | 40 +-
> debian.master/config/amd64/config.common.amd64 | 2 +
> debian.master/config/armel/config.flavour.omap | 2 +
> .../config/armel/config.flavour.versatile | 2 +
> debian.master/config/config.common.ubuntu | 2 -
> debian.master/config/i386/config.common.i386 | 2 +
> debian/rules.d/2-binary-arch.mk | 7 +
> drivers/acpi/acpica/aclocal.h | 1 +
> drivers/mmc/core/bus.c | 9 +
> drivers/mmc/core/core.c | 12 +-
> drivers/mmc/core/mmc.c | 30 +-
> drivers/mmc/core/sd.c | 249 ++-
> drivers/mmc/core/sd.h | 17 +
> drivers/mmc/core/sdio.c | 173 ++-
> drivers/mmc/host/Kconfig | 19 +
> drivers/mmc/host/Makefile | 6 +-
> drivers/mmc/host/imxmmc.c | 3 +-
> drivers/mmc/host/omap_hsmmc.c | 10 +-
> drivers/mmc/host/sdhci-cns3xxx.c | 97 +
> drivers/mmc/host/sdhci-esdhc-imx.c | 144 ++
> drivers/mmc/host/sdhci-esdhc.h | 83 +
> drivers/mmc/host/sdhci-of-esdhc.c | 70 +-
> drivers/mmc/host/sdhci-pltfm.c | 38 +-
> drivers/mmc/host/sdhci-pltfm.h | 26 +
> drivers/mmc/host/sdhci.c | 53 +-
> drivers/mmc/host/sdhci.h | 12 +
> drivers/video/omap2/omapfb/omapfb-main.c | 2 +-
> drivers/video/omap2/vram.c | 12 +-
> drivers/xen/events.c | 2 +-
> include/linux/mmc/card.h | 2 +
> include/linux/mmc/mmc.h | 1 +
> include/linux/{ => mmc}/sdhci-pltfm.h | 2 +-
> include/linux/mmc/sdio.h | 2 +
> mm/memblock.c | 4 +
> sound/pci/hda/hda_intel.c | 21 +-
> sound/pci/hda/patch_realtek.c | 16 +-
> 97 files changed, 5623 insertions(+), 5461 deletions(-)
> create mode 100644 arch/arm/mach-mx5/devices-imx51.h
> create mode 100644 arch/arm/plat-mxc/devices/platform-esdhc.c
> create mode 100644 arch/arm/plat-mxc/include/mach/esdhc.h
> delete mode 100644 debian.linaro/abi/2.6.35-1006.12/abiname
> create mode 100644 debian.linaro/abi/2.6.35-1007.13/abiname
> create mode 100644 debian.linaro/abi/2.6.35-1007.13/armel/ignore
> create mode 100644 debian.linaro/abi/2.6.35-1007.13/armel/ignore.modules
> rename debian.linaro/abi/{2.6.35-1006.12 =>
> 2.6.35-1007.13}/armel/linaro-mx51 (87%)
> rename debian.linaro/abi/{2.6.35-1006.12 =>
> 2.6.35-1007.13}/armel/linaro-mx51.modules (100%)
> rename debian.linaro/abi/{2.6.35-1006.12 =>
> 2.6.35-1007.13}/armel/linaro-omap (85%)
> rename debian.linaro/abi/{2.6.35-1006.12 =>
> 2.6.35-1007.13}/armel/linaro-omap.modules (100%)
> rename debian.linaro/abi/{2.6.35-1006.12 =>
> 2.6.35-1007.13}/armel/linaro-vexpress (99%)
> rename debian.linaro/abi/{2.6.35-1006.12 =>
> 2.6.35-1007.13}/armel/linaro-vexpress.modules (100%)
> delete mode 100644 debian.master/abi/2.6.35-22.33/amd64/virtual.modules
> delete mode 100644 debian.master/abi/2.6.35-22.33/i386/virtual.modules
> rename debian.master/abi/{2.6.35-22.33 => 2.6.35-22.34}/abiname (100%)
> rename debian.master/abi/{2.6.35-22.33 => 2.6.35-22.34}/amd64/generic (100%)
> rename debian.master/abi/{2.6.35-22.33 =>
> 2.6.35-22.34}/amd64/generic.modules (100%)
> rename debian.master/abi/{2.6.35-22.33 => 2.6.35-22.34}/amd64/server (100%)
> copy debian.master/abi/{2.6.35-22.33 =>
> 2.6.35-22.34}/amd64/server.modules (100%)
> rename debian.master/abi/{2.6.35-22.33 => 2.6.35-22.34}/amd64/virtual (100%)
> rename debian.master/abi/{2.6.35-22.33/amd64/server.modules =>
> 2.6.35-22.34/amd64/virtual.modules} (99%)
> create mode 100644 debian.master/abi/2.6.35-22.34/armel/ignore.modules
> rename debian.master/abi/{2.6.35-22.33 => 2.6.35-22.34}/armel/omap (100%)
> rename debian.master/abi/{2.6.35-22.33 =>
> 2.6.35-22.34}/armel/omap.modules (100%)
> rename debian.master/abi/{2.6.35-22.33 => 2.6.35-22.34}/armel/versatile (100%)
> rename debian.master/abi/{2.6.35-22.33 =>
> 2.6.35-22.34}/armel/versatile.modules (100%)
> rename debian.master/abi/{2.6.35-22.33 => 2.6.35-22.34}/i386/generic (100%)
> rename debian.master/abi/{2.6.35-22.33 => 2.6.35-22.34}/i386/generic-pae (100%)
> copy debian.master/abi/{2.6.35-22.33 =>
> 2.6.35-22.34}/i386/generic-pae.modules (100%)
> rename debian.master/abi/{2.6.35-22.33 =>
> 2.6.35-22.34}/i386/generic.modules (100%)
> rename debian.master/abi/{2.6.35-22.33 => 2.6.35-22.34}/i386/virtual (100%)
> rename debian.master/abi/{2.6.35-22.33/i386/generic-pae.modules =>
> 2.6.35-22.34/i386/virtual.modules} (99%)
> rename debian.master/abi/{2.6.35-22.33 => 2.6.35-22.34}/powerpc/powerpc (100%)
> rename debian.master/abi/{2.6.35-22.33 =>
> 2.6.35-22.34}/powerpc/powerpc-smp (100%)
> rename debian.master/abi/{2.6.35-22.33 =>
> 2.6.35-22.34}/powerpc/powerpc-smp.modules (100%)
> rename debian.master/abi/{2.6.35-22.33 =>
> 2.6.35-22.34}/powerpc/powerpc.modules (100%)
> rename debian.master/abi/{2.6.35-22.33 =>
> 2.6.35-22.34}/powerpc/powerpc64-smp (100%)
> rename debian.master/abi/{2.6.35-22.33 =>
> 2.6.35-22.34}/powerpc/powerpc64-smp.modules (100%)
> create mode 100644 drivers/mmc/core/sd.h
> create mode 100644 drivers/mmc/host/sdhci-cns3xxx.c
> create mode 100644 drivers/mmc/host/sdhci-esdhc-imx.c
> create mode 100644 drivers/mmc/host/sdhci-esdhc.h
> create mode 100644 drivers/mmc/host/sdhci-pltfm.h
> rename include/linux/{ => mmc}/sdhci-pltfm.h (93%)
uploaded
--
Tim Gardner tim.gardner at canonical.com
More information about the kernel-team
mailing list