kernel lockup on resume
John Zoidberg
zohn.joidberg at gmail.com
Sat Jan 2 19:12:53 UTC 2010
Hi,
Suspend to RAM has never worked on my laptop (suspend to disk works)
and I would really like to help fix this issue.
When I try to resume, I always get a black screen and the kernel seems
to be locked up: caps-lock key has no effect, ctrl+alt+del and sysrq
keys not working.
I have to keep the power button pressed to shut down the machine.
According to this page: http://en.opensuse.org/S2ram
"If none of the methods described here seem to work, it is important
to check if the machine is completely dead on resume or only the video
is not resumed properly. A good way to check this is to start with a
minimal system (init=/bin/bash), run s2ram -f, and after resume, when
the display is still off, check if the "Caps Lock" key still works
(you should see a reaction of the Caps Lock LED on the keyboard). If
it does, it is most likely really a video initialization problem. If
it doesn't, then it is most likely a BIOS problem or a bug in the
Linux kernel."
I did this and since the caps lock key is not working, I'm assuming
it's a BIOS or kernel problem. (I did try the different s2ram options
too a while ago, but nothing worked).
I then tried to use pm_trace as described here:
https://wiki.ubuntu.com/DebuggingKernelSuspend
I attached the resulting dmesg.txt to this e-mail.
Here is some more system info:
======================
[30][~]$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 9.10
Release: 9.10
Codename: karmic
[31][~]$ uname -a
Linux my-laptop 2.6.31-16-generic #53-Ubuntu SMP Tue Dec 8 04:01:29
UTC 2009 i686 GNU/Linux
[32][~]$ sudo s2ram -n
Machine unknown
This machine can be identified by:
sys_vendor = "Hewlett-Packard "
sys_product = "Presario 2500 (DF855A) "
sys_version = "KH.F.08 "
bios_version = "KF_KH.F.08"
See http://suspend.sf.net/s2ram-support.html for details.
If you report a problem, please include the complete output above.
======================
I also attached the output of "sudo lspci -vvvxxx".
I'm willing to recompile the kernel if necessary, but I'm not sure
where to begin.
Could somebody please guide me in debugging this issue?
Of course any direct solution to the resume problem is also appreciated. :)
KIAaze
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-16-generic (buildd at rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009 (Ubuntu 2.6.31-16.53-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bf70000 (usable)
[ 0.000000] BIOS-e820: 000000001bf70000 - 000000001bf7c000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001bf7c000 - 000000001bf80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved)
[ 0.000000] BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x1bf70 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 010000000 mask FF8000000 write-back
[ 0.000000] 2 base 018000000 mask FFC000000 write-back
[ 0.000000] 3 base 01BF80000 mask FFFF80000 uncachable
[ 0.000000] 4 base 02BF80000 mask FFFF80000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000001bf70000 (usable)
[ 0.000000] modified: 000000001bf70000 - 000000001bf7c000 (ACPI data)
[ 0.000000] modified: 000000001bf7c000 - 000000001bf80000 (ACPI NVS)
[ 0.000000] modified: 000000001bf80000 - 000000001c000000 (reserved)
[ 0.000000] modified: 000000002bf80000 - 000000002c000000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001bf70000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001bc00000 page 2M
[ 0.000000] 001bc00000 - 001bf70000 page 4k
[ 0.000000] kernel direct mapping tables up to 1bf70000 @ 10000-15000
[ 0.000000] RAMDISK: 1483e000 - 14fd3717
[ 0.000000] ACPI: RSDP 000f6c80 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 1bf753e9 0002C (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 1bf7bf64 00074 (v01 ATI Salmon 06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT 1bf75415 06B4F (v01 ATI MS2_1535 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 1bf7cfc0 00040
[ 0.000000] ACPI: BOOT 1bf7bfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 447MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1bf70000
[ 0.000000] low ram: 0 - 1bf70000
[ 0.000000] node 0 low ram: 00000000 - 1bf70000
[ 0.000000] node 0 bootmap 00011000 - 000147f0
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001bf70000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [001483e000 - 0014fd3717] RAMDISK ==> [001483e000 - 0014fd3717]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [00008a9000 - 00008ac240] BRK ==> [00008a9000 - 00008ac240]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001bf70
[ 0.000000] HighMem 0x0001bf70 -> 0x0001bf70
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001bf70
[ 0.000000] On node 0 totalpages: 114431
[ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 863 pages used for memmap
[ 0.000000] Normal zone: 109585 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 2c000000 (gap: 2c000000:d3f80000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1382000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113536
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic root=UUID=b68cd87d-2725-4f67-8f45-5ccc8bf070e4 ro init=/bin/bash
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2290560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 435440k/458176k available (4566k kernel code, 21936k reserved, 2142k data, 540k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xdc770000 - 0xff7fe000 ( 560 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdbf70000 ( 447 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575bb4 - 0xc078d3c8 (2142 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575bb4 (4566 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2392.995 MHz processor.
[ 0.002672] Console: colour VGA+ 80x25
[ 0.002684] console [tty0] enabled
[ 0.004027] Calibrating delay loop (skipped), value calculated using timer frequency.. 4785.99 BogoMIPS (lpj=9571980)
[ 0.004245] Security Framework initialized
[ 0.004389] AppArmor: AppArmor initialized
[ 0.004488] Mount-cache hash table entries: 512
[ 0.004968] Initializing cgroup subsys ns
[ 0.005066] Initializing cgroup subsys cpuacct
[ 0.005156] Initializing cgroup subsys memory
[ 0.005259] Initializing cgroup subsys freezer
[ 0.005345] Initializing cgroup subsys net_cls
[ 0.005474] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.005624] CPU: L2 cache: 512K
[ 0.005707] CPU: Hyper-Threading is disabled
[ 0.005795] mce: CPU supports 4 MCE banks
[ 0.005898] ------------[ cut here ]------------
[ 0.006010] WARNING: at /build/buildd/linux-2.6.31/arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x33/0x40()
[ 0.006117] Hardware name: Presario 2500 (DF855A)
[ 0.006202] Modules linked in:
[ 0.006352] Pid: 0, comm: swapper Not tainted 2.6.31-16-generic #53-Ubuntu
[ 0.006439] Call Trace:
[ 0.006545] [<c014518d>] warn_slowpath_common+0x6d/0xa0
[ 0.006638] [<c011d7e3>] ? native_apic_write_dummy+0x33/0x40
[ 0.006729] [<c011d7e3>] ? native_apic_write_dummy+0x33/0x40
[ 0.006821] [<c01451d5>] warn_slowpath_null+0x15/0x20
[ 0.006911] [<c011d7e3>] native_apic_write_dummy+0x33/0x40
[ 0.007008] [<c011278c>] intel_init_thermal+0xac/0x1a0
[ 0.007098] [<c0111dbb>] mce_intel_feature_init+0xb/0x60
[ 0.007189] [<c010fcf0>] mce_cpu_features+0x10/0x40
[ 0.007289] [<c056b29c>] mcheck_init+0x14a/0x188
[ 0.007376] [<c05696d8>] ? init_hypervisor+0xb/0x2c
[ 0.007465] [<c0569690>] identify_cpu+0x20e/0x21d
[ 0.007563] [<c0795732>] identify_boot_cpu+0xd/0x23
[ 0.007652] [<c07958c8>] check_bugs+0xb/0xe9
[ 0.007744] [<c078e8c3>] start_kernel+0x2dc/0x2ec
[ 0.007831] [<c078e406>] ? unknown_bootoption+0x0/0x1ab
[ 0.007921] [<c078e07c>] i386_start_kernel+0x7c/0x83
[ 0.008036] ---[ end trace a7919e7f17c0a725 ]---
[ 0.008131] CPU0: Thermal monitoring enabled (TM1)
[ 0.008236] Performance Counters: no PMU driver, software counters only.
[ 0.008398] Checking 'hlt' instruction... OK.
[ 0.026511] SMP alternatives: switching to UP code
[ 0.048070] Freeing SMP alternatives: 19k freed
[ 0.048231] ACPI: Core revision 20090521
[ 0.096277] ACPI: setting ELCR to 0200 (from 0420)
[ 0.099053] weird, boot CPU (#0) not listed by the BIOS.
[ 0.099106] SMP motherboard not detected.
[ 0.099155] Local APIC not detected. Using dummy APIC emulation.
[ 0.099203] SMP disabled
[ 0.099582] Brought up 1 CPUs
[ 0.099634] Total of 1 processors activated (4785.99 BogoMIPS).
[ 0.099702] CPU0 attaching NULL sched-domain.
[ 0.100118] Booting paravirtualized kernel on bare hardware
[ 0.100488] regulator: core version 0.5
[ 0.100576] Time: 18:14:20 Date: 01/02/10
[ 0.100713] NET: Registered protocol family 16
[ 0.100989] EISA bus registered
[ 0.101064] ACPI: bus type pci registered
[ 0.101339] PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=2
[ 0.101391] PCI: Using configuration type 1 for base access
[ 0.102960] bio: create slab <bio-0> at 0
[ 0.104091] ACPI: EC: Look up EC in DSDT
[ 0.112872] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.120243] ACPI: Interpreter enabled
[ 0.120243] ACPI: (supports S0 S3 S4 S5)
[ 0.120454] ACPI: Using PIC for interrupt routing
[ 0.132545] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.132602] ACPI: EC: driver started in interrupt mode
[ 0.132876] ACPI: No dock devices found.
[ 0.134160] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.134278] pci 0000:00:00.0: reg 10 32bit mmio: [0xd4000000-0xd7ffffff]
[ 0.134285] pci 0000:00:00.0: reg 14 32bit mmio: [0xd0009000-0xd0009fff]
[ 0.134373] pci 0000:00:06.0: reg 10 io port: [0x1000-0x10ff]
[ 0.134381] pci 0000:00:06.0: reg 14 32bit mmio: [0xd0000000-0xd0000fff]
[ 0.134413] pci 0000:00:06.0: supports D1 D2
[ 0.134416] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold
[ 0.134469] pci 0000:00:06.0: PME# disabled
[ 0.134607] pci 0000:00:08.0: reg 10 32bit mmio: [0xd0001000-0xd0001fff]
[ 0.134614] pci 0000:00:08.0: reg 14 io port: [0x1400-0x14ff]
[ 0.134645] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.136010] pci 0000:00:08.0: PME# disabled
[ 0.136094] pci 0000:00:0a.0: reg 10 32bit mmio: [0xd0002000-0xd0002fff]
[ 0.136112] pci 0000:00:0a.0: supports D1 D2
[ 0.136115] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.136168] pci 0000:00:0a.0: PME# disabled
[ 0.136255] pci 0000:00:0b.0: reg 20 io port: [0x2000-0x201f]
[ 0.136279] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[ 0.136330] pci 0000:00:0b.0: PME# disabled
[ 0.136417] pci 0000:00:0b.1: reg 20 io port: [0x2020-0x203f]
[ 0.136440] pci 0000:00:0b.1: PME# supported from D0 D3hot D3cold
[ 0.136491] pci 0000:00:0b.1: PME# disabled
[ 0.136568] pci 0000:00:0b.2: reg 10 32bit mmio: [0xd0003000-0xd00030ff]
[ 0.136605] pci 0000:00:0b.2: PME# supported from D0 D3hot D3cold
[ 0.136656] pci 0000:00:0b.2: PME# disabled
[ 0.136738] pci 0000:00:0c.0: reg 10 32bit mmio: [0xd0003800-0xd0003fff]
[ 0.136745] pci 0000:00:0c.0: reg 14 32bit mmio: [0xd0004000-0xd0007fff]
[ 0.136780] pci 0000:00:0c.0: supports D1 D2
[ 0.136783] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot
[ 0.136834] pci 0000:00:0c.0: PME# disabled
[ 0.136923] pci 0000:00:10.0: reg 20 io port: [0x2040-0x204f]
[ 0.136997] pci 0000:00:11.0: quirk: region 8000-803f claimed by ali7101 ACPI
[ 0.137050] pci 0000:00:11.0: quirk: region 8040-805f claimed by ali7101 SMB
[ 0.137130] pci 0000:00:12.0: reg 10 io port: [0x2400-0x24ff]
[ 0.137137] pci 0000:00:12.0: reg 14 32bit mmio: [0xd0008000-0xd0008fff]
[ 0.137159] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.137175] pci 0000:00:12.0: supports D1 D2
[ 0.137178] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.137229] pci 0000:00:12.0: PME# disabled
[ 0.137339] pci 0000:01:05.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
[ 0.137346] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
[ 0.137353] pci 0000:01:05.0: reg 18 32bit mmio: [0xd0300000-0xd030ffff]
[ 0.137369] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.137389] pci 0000:01:05.0: supports D1 D2
[ 0.137423] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.137427] pci 0000:00:01.0: bridge 32bit mmio: [0xd0300000-0xd03fffff]
[ 0.137433] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
[ 0.137454] pci_bus 0000:00: on NUMA node 0
[ 0.137462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.137558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 0.140232] ACPI: PCI Interrupt Link [LNK0] (IRQs 7 10) *0, disabled.
[ 0.140688] ACPI: PCI Interrupt Link [LNK1] (IRQs 7 *10)
[ 0.141066] ACPI: PCI Interrupt Link [LNK2] (IRQs 7 *10)
[ 0.141442] ACPI: PCI Interrupt Link [LNK3] (IRQs 7 *10)
[ 0.141819] ACPI: PCI Interrupt Link [LNK4] (IRQs 7 10) *0, disabled.
[ 0.142265] ACPI: PCI Interrupt Link [LNK5] (IRQs 7 *11)
[ 0.142638] ACPI: PCI Interrupt Link [LNK6] (IRQs 7 10) *0, disabled.
[ 0.143087] ACPI: PCI Interrupt Link [LNK7] (IRQs *5)
[ 0.143425] ACPI: PCI Interrupt Link [LNK8] (IRQs 7 10) *0, disabled.
[ 0.144027] SCSI subsystem initialized
[ 0.144210] libata version 3.00 loaded.
[ 0.144344] usbcore: registered new interface driver usbfs
[ 0.144427] usbcore: registered new interface driver hub
[ 0.144516] usbcore: registered new device driver usb
[ 0.144785] ACPI: WMI: Mapper loaded
[ 0.144838] PCI: Using ACPI for IRQ routing
[ 0.145102] Bluetooth: Core ver 2.15
[ 0.145206] NET: Registered protocol family 31
[ 0.145257] Bluetooth: HCI device and connection manager initialized
[ 0.145309] Bluetooth: HCI socket layer initialized
[ 0.145358] NetLabel: Initializing
[ 0.145405] NetLabel: domain hash size = 128
[ 0.145452] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.145518] NetLabel: unlabeled traffic allowed by default
[ 0.148562] pnp: PnP ACPI init
[ 0.148670] ACPI: bus type pnp registered
[ 0.150977] pnp 00:07: io resource (0x8004-0x8005) overlaps 0000:00:11.0 BAR 13 (0x8000-0x803f), disabling
[ 0.154455] pnp: PnP ACPI: found 11 devices
[ 0.154510] ACPI: ACPI bus type pnp unregistered
[ 0.154563] PnPBIOS: Disabled by ACPI PNP
[ 0.154632] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 0.154684] system 00:07: ioport range 0x480-0x48f has been reserved
[ 0.154737] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.154788] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 0.154839] system 00:07: ioport range 0x8000-0x807f could not be reserved
[ 0.154890] system 00:07: ioport range 0xff00-0xff01 has been reserved
[ 0.154941] system 00:07: ioport range 0x80f0-0x80f3 has been reserved
[ 0.154992] system 00:07: ioport range 0xfe00-0xfefe has been reserved
[ 0.155046] system 00:07: iomem range 0xd0009000-0xd0009fff has been reserved
[ 0.189896] AppArmor: AppArmor Filesystem Enabled
[ 0.189998] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.190050] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.190102] pci 0000:00:01.0: MEM window: 0xd0300000-0xd03fffff
[ 0.190155] pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff
[ 0.190208] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02
[ 0.190258] pci 0000:00:0a.0: IO window: 0x001800-0x0018ff
[ 0.190309] pci 0000:00:0a.0: IO window: 0x001c00-0x001cff
[ 0.190360] pci 0000:00:0a.0: PREFETCH window: 0x2c000000-0x2fffffff
[ 0.190412] pci 0000:00:0a.0: MEM window: 0x30000000-0x33ffffff
[ 0.190482] pci 0000:00:0a.0: enabling device (0000 -> 0003)
[ 0.190830] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11
[ 0.190881] PCI: setting IRQ 11 as level-triggered
[ 0.190887] pci 0000:00:0a.0: PCI INT A -> Link[LNK5] -> GSI 11 (level, low) -> IRQ 11
[ 0.190953] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.190957] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.190961] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.190965] pci_bus 0000:01: resource 1 mem: [0xd0300000-0xd03fffff]
[ 0.190968] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff]
[ 0.190972] pci_bus 0000:02: resource 0 io: [0x1800-0x18ff]
[ 0.190976] pci_bus 0000:02: resource 1 io: [0x1c00-0x1cff]
[ 0.190979] pci_bus 0000:02: resource 2 pref mem [0x2c000000-0x2fffffff]
[ 0.190982] pci_bus 0000:02: resource 3 mem: [0x30000000-0x33ffffff]
[ 0.191054] NET: Registered protocol family 2
[ 0.191255] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.191711] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.191955] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.192216] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.192269] TCP reno registered
[ 0.192446] NET: Registered protocol family 1
[ 0.192608] Trying to unpack rootfs image as initramfs...
[ 0.500488] Freeing initrd memory: 7765k freed
[ 0.518281] Simple Boot Flag at 0x37 set to 0x1
[ 0.518498] cpufreq-nforce2: No nForce2 chipset.
[ 0.518589] Scanning for low memory corruption every 60 seconds
[ 0.518874] audit: initializing netlink socket (disabled)
[ 0.518964] type=2000 audit(1262456060.515:1): initialized
[ 0.528371] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.530280] VFS: Disk quotas dquot_6.5.2
[ 0.530418] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.531307] fuse init (API version 7.12)
[ 0.531486] msgmni has been set to 866
[ 0.531880] alg: No test for stdrng (krng)
[ 0.531995] io scheduler noop registered
[ 0.532045] io scheduler anticipatory registered
[ 0.532092] io scheduler deadline registered
[ 0.532223] io scheduler cfq registered (default)
[ 0.532311] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 0.532414] pci 0000:01:05.0: Boot video device
[ 0.532543] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.532628] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.533141] ACPI: AC Adapter [ACAD] (on-line)
[ 0.533320] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.533384] ACPI: Power Button [PWRF]
[ 0.533511] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.533572] ACPI: Power Button [PWRB]
[ 0.533682] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.538051] ACPI: Lid Switch [LID]
[ 0.538406] Marking TSC unstable due to TSC halts in idle
[ 0.538477] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 0.538672] processor LNXCPU:00: registered as cooling_device0
[ 0.539968] Switched to high resolution mode on CPU 0
[ 0.573809] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.573876] ACPI: Thermal Zone [THRM] (49 C)
[ 0.574023] isapnp: Scanning for PnP cards...
[ 0.623487] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.928896] isapnp: No Plug & Play device found
[ 0.930733] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.930984] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.931424] serial 0000:00:08.0: enabling device (0000 -> 0003)
[ 0.931807] ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 10
[ 0.931860] PCI: setting IRQ 10 as level-triggered
[ 0.931866] serial 0000:00:08.0: PCI INT A -> Link[LNK6] -> GSI 10 (level, low) -> IRQ 10
[ 0.931931] serial 0000:00:08.0: PCI INT A disabled
[ 0.933447] brd: module loaded
[ 0.934153] loop: module loaded
[ 0.934389] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.934834] pata_ali 0000:00:10.0: can't derive routing for PCI INT A
[ 0.935155] scsi0 : pata_ali
[ 0.935415] scsi1 : pata_ali
[ 0.935792] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2040 irq 14
[ 0.935846] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2048 irq 15
[ 0.936924] Fixed MDIO Bus: probed
[ 0.937031] PPP generic driver version 2.4.2
[ 0.937298] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.937379] ehci_hcd 0000:00:0b.2: enabling device (0010 -> 0012)
[ 0.937440] ehci_hcd 0000:00:0b.2: PCI INT C -> Link[LNK5] -> GSI 11 (level, low) -> IRQ 11
[ 0.937530] ehci_hcd 0000:00:0b.2: EHCI Host Controller
[ 0.937689] ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1
[ 0.937811] ehci_hcd 0000:00:0b.2: irq 11, io mem 0xd0003000
[ 0.948077] ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 0.95
[ 0.948270] usb usb1: configuration #1 chosen from 1 choice
[ 0.948366] hub 1-0:1.0: USB hub found
[ 0.948428] hub 1-0:1.0: 4 ports detected
[ 0.948569] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.948653] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.949132] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
[ 0.949187] uhci_hcd 0000:00:0b.0: PCI INT A -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10
[ 0.949256] uhci_hcd 0000:00:0b.0: UHCI Host Controller
[ 0.949388] uhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 0.949490] uhci_hcd 0000:00:0b.0: irq 10, io base 0x00002000
[ 0.949679] usb usb2: configuration #1 chosen from 1 choice
[ 0.949774] hub 2-0:1.0: USB hub found
[ 0.949834] hub 2-0:1.0: 2 ports detected
[ 0.950236] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10
[ 0.950290] uhci_hcd 0000:00:0b.1: PCI INT B -> Link[LNK3] -> GSI 10 (level, low) -> IRQ 10
[ 0.950355] uhci_hcd 0000:00:0b.1: UHCI Host Controller
[ 0.950470] uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 3
[ 0.950552] uhci_hcd 0000:00:0b.1: irq 10, io base 0x00002020
[ 0.950731] usb usb3: configuration #1 chosen from 1 choice
[ 0.950821] hub 3-0:1.0: USB hub found
[ 0.950879] hub 3-0:1.0: 2 ports detected
[ 0.951083] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.955100] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.955161] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.955329] mice: PS/2 mouse device common for all mice
[ 0.955614] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.955696] rtc0: alarms up to one month, y3k, 242 bytes nvram
[ 0.955937] device-mapper: uevent: version 1.0.3
[ 0.956216] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[ 0.956424] device-mapper: multipath: version 1.1.0 loaded
[ 0.956477] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.956752] EISA: Probing bus 0 at eisa.0
[ 0.956812] Cannot allocate resource for EISA slot 1
[ 0.958043] Cannot allocate resource for EISA slot 2
[ 0.958114] Cannot allocate resource for EISA slot 8
[ 0.958162] EISA: Detected 0 cards.
[ 0.958329] cpuidle: using governor ladder
[ 0.958447] cpuidle: using governor menu
[ 0.959281] TCP cubic registered
[ 0.959502] NET: Registered protocol family 10
[ 0.960192] lo: Disabled Privacy Extensions
[ 0.960660] NET: Registered protocol family 17
[ 0.960749] Bluetooth: L2CAP ver 2.13
[ 0.960798] Bluetooth: L2CAP socket layer initialized
[ 0.960848] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.960896] Bluetooth: SCO socket layer initialized
[ 0.961036] Bluetooth: RFCOMM TTY layer initialized
[ 0.961088] Bluetooth: RFCOMM socket layer initialized
[ 0.961136] Bluetooth: RFCOMM ver 1.11
[ 0.961245] Using IPI No-Shortcut mode
[ 0.961419] PM: Resume from disk failed.
[ 0.961444] registered taskstats version 1
[ 0.961658] Magic number: 10:195:240
[ 0.961873] rtc_cmos 00:02: setting system clock to 2010-01-02 18:14:21 UTC (1262456061)
[ 0.961935] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.961984] EDD information not available.
[ 0.989337] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.100424] ata1.00: ATA-5: HITACHI_DK23EA-40, 00K3A0A2, max UDMA/100
[ 1.100481] ata1.00: 78140160 sectors, multi 16: LBA
[ 1.108376] ata1.00: configured for UDMA/100
[ 1.108626] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23EA-4 00K3 PQ: 0 ANSI: 5
[ 1.108913] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.109033] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.109165] sd 0:0:0:0: [sda] Write Protect is off
[ 1.109216] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.109252] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.109533] sda: sda1 sda2 < sda5 > sda3 sda4
[ 1.164425] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.272280] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, 0C27, max MWDMA2
[ 1.272376] ata2.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled
[ 1.272436] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[ 1.288222] ata2.00: configured for MWDMA2
[ 1.294383] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4241N 0C27 PQ: 0 ANSI: 5
[ 1.307145] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.307203] Uniform CD-ROM driver Revision: 3.20
[ 1.307414] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.307519] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.307607] Freeing unused kernel memory: 540k freed
[ 1.308457] Write protecting the kernel text: 4568k
[ 1.308553] Write protecting the kernel read-only data: 1836k
[ 1.452474] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 1.569117] Linux agpgart interface v0.103
[ 1.572509] agpgart-ati 0000:00:00.0: Ati IGP345M chipset
[ 1.687139] agpgart-ati 0000:00:00.0: AGP aperture is 64M @ 0xd4000000
[ 1.687856] usb 2-2: configuration #1 chosen from 1 choice
[ 1.807183] [drm] Initialized drm 1.1.0 20060810
[ 1.888213] [drm] radeon default to kernel modesetting DISABLED.
[ 1.888363] pci 0000:01:05.0: power state changed by ACPI to D0
[ 1.888805] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10
[ 1.888860] pci 0000:01:05.0: PCI INT A -> Link[LNK0] -> GSI 10 (level, low) -> IRQ 10
[ 1.889398] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0
[ 1.894332] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 1.894335] originally by Donald Becker <becker at scyld.com>
[ 1.894337] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 1.894923] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
[ 1.894979] natsemi 0000:00:12.0: PCI INT A -> Link[LNK1] -> GSI 10 (level, low) -> IRQ 10
[ 1.914516] natsemi eth0: NatSemi DP8381[56] at 0xd0008000 (0000:00:12.0), 00:0b:cd:ab:ef:d9, IRQ 10, port TP.
[ 1.921831] ohci1394 0000:00:0c.0: enabling device (0010 -> 0012)
[ 1.921905] ohci1394 0000:00:0c.0: PCI INT A -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10
[ 1.927763] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input5
[ 1.927921] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.931328] Floppy drive(s): fd0 is 1.44M
[ 1.940838] usbcore: registered new interface driver hiddev
[ 1.949835] FDC 0 is a post-1991 82077
[ 1.955110] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input6
[ 1.955344] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:0b.0-2/input0
[ 1.955441] usbcore: registered new interface driver usbhid
[ 1.955494] usbhid: v2.6:USB HID core driver
[ 1.977853] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d0003800-d0003fff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.788573] PM: Starting manual resume from disk
[ 2.788636] PM: Resume from partition 8:4
[ 2.788639] PM: Checking hibernation image.
[ 2.788921] PM: Resume from disk failed.
[ 2.796341] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 2.796352] PM: Basic memory bitmaps created
[ 2.800113] PM: Basic memory bitmaps freed
[ 2.839887] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 2.840064] EXT4-fs (sda5): write access will be enabled during recovery
[ 2.870386] EXT4-fs (sda5): barriers enabled
[ 2.915473] kjournald2 starting: pid 352, dev sda5:8, commit interval 5 seconds
[ 2.915583] EXT4-fs (sda5): delayed allocation enabled
[ 2.915706] EXT4-fs: file extents enabled
[ 2.917104] EXT4-fs: mballoc enabled
[ 2.917175] EXT4-fs (sda5): recovery complete
[ 2.919039] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 3.248281] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000bcd71a0abeaf4]
[ 4.313641] type=1505 audit(1262456064.850:2): operation="profile_load" pid=378 name=/usr/share/gdm/guest-session/Xsession
[ 4.358449] type=1505 audit(1262456064.894:3): operation="profile_load" pid=379 name=/sbin/dhclient3
[ 4.359217] type=1505 audit(1262456064.894:4): operation="profile_load" pid=379 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.359659] type=1505 audit(1262456064.894:5): operation="profile_load" pid=379 name=/usr/lib/connman/scripts/dhclient-script
[ 4.448273] type=1505 audit(1262456064.986:6): operation="profile_load" pid=380 name=/usr/bin/evince
[ 4.461072] type=1505 audit(1262456064.998:7): operation="profile_load" pid=380 name=/usr/bin/evince-previewer
[ 4.468398] type=1505 audit(1262456065.006:8): operation="profile_load" pid=380 name=/usr/bin/evince-thumbnailer
[ 4.518375] type=1505 audit(1262456065.054:9): operation="profile_load" pid=382 name=/usr/lib/cups/backend/cups-pdf
[ 27.394131] EXT4-fs (sda5): internal journal on sda5:8
-------------- next part --------------
00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at d4000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at d0009000 (32-bit, prefetchable) [size=4K]
Capabilities: [a0] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
Kernel driver in use: agpgart-ati
Kernel modules: ati-agp
00: 02 10 b2 cb 06 00 30 02 02 00 00 06 00 40 00 00
10: 08 00 00 d4 08 90 00 d0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 11 64 08 03 00 00 00 00 00 00 04 0d 00 00
50: 00 00 00 00 83 93 00 80 00 10 11 11 00 30 13 11
60: bd 0c 00 00 24 26 e2 56 00 0a 25 00 00 ab c0 d1
70: e1 09 20 30 84 84 84 84 00 00 10 00 00 00 00 00
80: 00 00 00 00 96 10 83 00 30 00 30 00 03 00 00 00
90: 00 00 00 1c 05 1f 07 00 00 00 e4 7f a4 00 00 00
a0: 02 00 20 00 17 02 00 0f 04 03 00 00 03 00 00 00
b0: 00 00 02 00 08 00 00 00 04 04 05 00 00 00 00 00
c0: 00 00 00 ff 5a 15 05 0f 00 1c ff 1f 11 00 84 00
d0: f4 27 0f 00 f7 27 4f 00 6a 00 60 10 00 00 00 ff
e0: 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 ff
f0: 1f 00 09 00 00 00 00 ff 00 08 10 20 00 00 00 00
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d0300000-d03fffff
Prefetchable memory behind bridge: d8000000-dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00: 02 10 10 70 07 00 20 02 00 00 04 06 00 63 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 44 91 91 20 22
20: 30 d0 30 d0 00 d8 f0 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 0c 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02)
Subsystem: Hewlett-Packard Company Device 0850
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+ INTx-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ALI 5451
Kernel modules: snd-ali5451
00: b9 10 51 54 07 00 90 c2 02 00 01 04 00 40 00 00
10: 01 10 00 00 00 00 00 d0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 02 18
40: 00 00 00 00 aa 40 08 e2 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 e6
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+]
Subsystem: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: alim7101_wdt, alim1535_wdt
00: b9 10 33 15 0f 00 10 02 00 00 01 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b9 10 33 15
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 01 13 0b ea 5d 42 00 03 33 33 90 53 00 00 cd 33
50: 00 00 00 40 02 00 02 00 4c 80 80 00 00 00 e0 f0
60: 62 21 00 00 00 00 00 00 00 00 00 00 00 64 00 00
70: d2 00 23 00 00 1f 81 00 00 00 00 00 61 00 00 91
80: a5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:08.0 Modem: ALi Corporation M5457 AC'97 Modem Controller
Subsystem: Hewlett-Packard Company Device 0850
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0001000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 1400 [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: b9 10 57 54 03 00 90 02 00 00 03 07 00 40 00 00
10: 00 10 00 d0 01 14 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00
40: 01 00 22 c0 00 00 00 00 01 00 00 00 00 00 00 00
50: 3c 10 50 08 00 00 00 00 08 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller
Subsystem: Hewlett-Packard Company Device 0850
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0002000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 2c000000-2ffff000 (prefetchable)
Memory window 1: 30000000-33fff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00: 17 12 72 69 87 00 10 04 00 00 07 06 00 a8 02 00
10: 00 20 00 d0 a0 00 00 02 00 02 05 b0 00 00 00 2c
20: 00 f0 ff 2f 00 00 00 30 00 f0 ff 33 01 18 00 00
30: fd 18 00 00 01 1c 00 00 fd 1c 00 00 ff 01 00 05
40: 3c 10 50 08 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 82 18 88 01
90: 02 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 02 fe 00 40 c0 00 00 00 00 00 11 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 40 00 08 ea 03 82 02 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0b.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
Subsystem: Hewlett-Packard Company Device 0850
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 2000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00: 06 11 38 30 15 00 10 02 50 00 03 0c 08 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 20 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 01 00 00
40: 40 10 03 00 c2 00 34 d4 00 03 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 c2 c9 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
00:0b.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
Subsystem: Hewlett-Packard Company Device 0850
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 2020 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00: 06 11 38 30 15 00 10 02 50 00 03 0c 08 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 21 20 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 02 00 00
40: 40 10 03 00 c2 00 30 c0 00 0b 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 c2 c9 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if 20)
Subsystem: Hewlett-Packard Company Device 0850
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 128 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at d0003000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
00: 06 11 04 31 16 00 10 02 51 20 03 0c 20 40 80 00
10: 00 30 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 80 00 00 00 00 00 00 00 ff 03 00 00
40: 00 00 01 00 00 00 00 00 80 00 00 00 00 00 00 00
50: 00 5a 00 80 00 00 00 00 04 0b bb bb 53 00 00 00
60: 20 20 01 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 c2 c9 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10)
Subsystem: Hewlett-Packard Company Device 0850
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0003800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d0004000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394
00: 4c 10 26 80 16 00 10 02 00 10 00 0c 08 40 00 00
10: 00 38 00 d0 00 40 00 d0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 02 04
40: 00 00 00 00 01 00 02 7e 00 80 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00
f0: 10 00 00 00 82 10 00 00 3c 10 50 08 00 00 00 00
00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) (prog-if fa)
Subsystem: Hewlett-Packard Company Device 0850
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at 2040 [size=16]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_ali
00: b9 10 29 52 05 00 90 02 c4 fa 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 20 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 60 00 00 00 00 00 00 00 00 01 02 04
40: 00 00 00 0a 00 00 00 00 30 00 20 c9 00 00 ba 3a
50: 02 00 00 89 08 00 0f 00 01 31 31 0a 01 31 31 0a
60: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
Subsystem: Hewlett-Packard Company Device 0850
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: ali1535_smbus
Kernel modules: alim7101_wdt, i2c-ali15x3, i2c-ali1535
00: b9 10 01 71 00 00 00 02 00 00 80 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00
40: 00 40 00 00 00 80 20 00 aa 20 00 30 00 00 00 00
50: 00 01 00 00 00 00 00 00 00 00 00 20 00 00 00 00
60: 00 00 00 00 a5 00 00 00 00 00 20 22 00 00 00 0e
70: 00 00 00 00 00 00 00 28 c1 11 00 a2 b8 1e 13 00
80: 76 8a 13 13 30 3a 00 00 0e 00 00 0a 00 a0 00 00
90: 30 03 00 00 00 00 00 3b db 00 00 21 00 01 00 00
a0: 00 00 00 c0 00 00 00 28 00 fe 00 00 00 00 00 00
b0: 01 84 00 08 00 0f 01 00 60 04 00 01 00 05 00 a5
c0: 10 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 46 04 00 00 00 02 00 00 00 40 00 10 80 00 00
e0: 00 80 40 80 01 00 01 00 00 00 00 00 00 00 00 00
f0: 01 00 20 1e 00 00 00 00 00 00 00 00 00 00 00 00
00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
Subsystem: Hewlett-Packard Company Device 0850
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 90 (2750ns min, 13000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 2400 [size=256]
Region 1: Memory at d0008000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 34000000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=320mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: natsemi
Kernel modules: natsemi
00: 0b 10 20 00 07 00 90 02 00 00 00 02 00 5a 00 00
10: 01 24 00 00 00 80 00 d0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 0b 34
40: 01 00 82 ff 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 330M/340M/350M
Subsystem: Hewlett-Packard Company Device 0850
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B+ DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at d0300000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at d0320000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=16 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: radeon, radeonfb
00: 02 10 37 43 87 02 b0 02 00 00 00 03 08 42 00 00
10: 08 00 00 d8 01 90 00 00 00 00 30 d0 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 58 00 00 00 00 00 00 00 ff 01 08 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
50: 01 00 02 06 00 00 00 00 02 50 20 00 07 02 00 2f
60: 04 03 00 0f 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:00.0 Ethernet controller: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01)
Subsystem: Atheros Communications Inc. Device 1051
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 30000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: ath5k
Kernel modules: ath5k
00: 8c 16 13 00 06 00 90 02 01 00 00 02 08 a8 00 00
10: 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 01 50 00 00 8c 16 51 10
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 0a 1c
40: 00 00 00 00 01 00 c2 01 00 40 00 c6 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
More information about the kernel-team
mailing list