[PATCH] netdev/fec: fix ifconfig eth0 down hang issue (v2)

[Bryan Wu]

This patch is also for both Karmic and Lucid and was tested again. 
Please kindly review.

Thanks
-Bryan


Bryan Wu wrote:
> BugLink: http://bugs.launchpad.net/bugs/559065
>
> v2:
> Check fec_enet_mii_probe() return value directly, instead of fep->phy_dev
>
> v1:
> In ethernet connection open/close function, we need to use phy_connect
> and phy_disconnect operation before we start/stop phy. Otherwise it will
> cause system hang. Also suspend/resume needs the same fix.
>
> Signed-off-by: Bryan Wu <bryan.wu at canonical.com>
> ---
>  drivers/net/fec.c |   13 +++++++++++--
>  1 files changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/fec.c b/drivers/net/fec.c
> index 2280373..6a13594 100644
> --- a/drivers/net/fec.c
> +++ b/drivers/net/fec.c
> @@ -929,7 +929,9 @@ fec_enet_open(struct net_device *dev)
>  		return ret;
>  
>  	/* schedule a link state check */
> -	phy_start(fep->phy_dev);
> +	if (fec_enet_mii_probe(dev) != 0)
> +		phy_start(fep->phy_dev);
> +
>  	netif_start_queue(dev);
>  	fep->opened = 1;
>  	return 0;
> @@ -942,10 +944,13 @@ fec_enet_close(struct net_device *dev)
>  
>  	/* Don't know what to do yet. */
>  	fep->opened = 0;
> -	phy_stop(fep->phy_dev);
>  	netif_stop_queue(dev);
> +
>  	fec_stop(dev);
>  
> +	if (fep->phy_dev)
> +		phy_disconnect(fep->phy_dev);
> +
>          fec_enet_free_buffers(dev);
>  	clk_disable(fep->clk);
>  
> @@ -1396,6 +1401,8 @@ fec_suspend(struct platform_device *dev, pm_message_t state)
>  		fep = netdev_priv(ndev);
>  		if (netif_running(ndev)) {
>  			netif_device_detach(ndev);
> +			if (fep->phy_dev)
> +				phy_disconnect(fep->phy_dev);
>  			fec_stop(ndev);
>  			clk_disable(fep->clk);
>  		}
> @@ -1415,6 +1422,8 @@ fec_resume(struct platform_device *dev)
>  		if (netif_running(ndev)) {
>  			clk_enable(fep->clk);
>  			fec_restart(ndev, 1);
> +			if (fec_enet_mii_probe(dev) != 0)
> +				phy_start(fep->phy_dev);
>  			netif_device_attach(ndev);
>  		}
>  	}
>