[PATCH] [UBUNTU:sound] Fix initialization and routing for Realtek ALC* family HDA codecs
crimsun at fungus.sh.nu
crimsun at fungus.sh.nu
Fri Mar 10 11:32:49 UTC 2006
UpstreamStatus: Added in upstream pci/hda/patch_realtek.c r1.32-r1.59
This gigantenormous patch properly fixes numerous bugs reported in
Malone (#6608, #18964, #21256, #27122, #28443, #28994, #33719) related
to Realtek HDA codecs. Users on ubuntuforums have also reported
difficulties in booting or getting audible output from their ALC* HDA
hardware[0]. This codec family is the most popular among new HDA sound
chipsets.
Significant changes to the initialization and routing for ALC* HDA
codecs, resulting in audible sound on affected hardware, necessitates
the invasiveness of these changes.
The xxx_t typedefs have been retained, as with the other HDA patches,
for compatibility.
[0] http://www.ubuntuforums.org/showthread.php?t=138120 ,
http://www.ubuntuforums.org/showthread.php?t=138019 ,
http://www.ubuntuforums.org/showthread.php?t=137994 ,
http://www.ubuntuforums.org/showthread.php?t=133325 ,
http://www.ubuntuforums.org/showthread.php?t=132188 ,
http://www.ubuntuforums.org/showthread.php?t=126686 ,
http://www.ubuntuforums.org/showthread.php?t=76307 ,
http://www.ubuntuforums.org/showthread.php?t=76019 , ...
Signed-off-by: Daniel T Chen <crimsun at ubuntu.com>
---
sound/pci/hda/patch_realtek.c | 3925 +++++++++++++++++++++++++++++++++++------
1 files changed, 3371 insertions(+), 554 deletions(-)
8db18c04daa88b86833dfc3982be45afa331db6c
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index a0ba2e8..24c9867 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3,8 +3,10 @@
*
* HD audio interface patch for ALC 260/880/882 codecs
*
- * Copyright (c) 2004 PeiSen Hou <pshou at realtek.com.tw>
+ * Copyright (c) 2004 Kailang Yang <kailang at realtek.com.tw>
+ * PeiSen Hou <pshou at realtek.com.tw>
* Takashi Iwai <tiwai at suse.de>
+ * Jonathan Woithe <jwoithe at physics.adelaide.edu.au>
*
* This driver is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -39,17 +41,21 @@ enum {
ALC880_5ST_DIG,
ALC880_W810,
ALC880_Z71V,
- ALC880_AUTO,
ALC880_6ST,
ALC880_6ST_DIG,
ALC880_F1734,
ALC880_ASUS,
ALC880_ASUS_DIG,
ALC880_ASUS_W1V,
+ ALC880_ASUS_DIG2,
ALC880_UNIWILL_DIG,
+ ALC880_CLEVO,
+ ALC880_TCL_S700,
+ ALC880_LG,
#ifdef CONFIG_SND_DEBUG
ALC880_TEST,
#endif
+ ALC880_AUTO,
ALC880_MODEL_LAST /* last tag */
};
@@ -57,30 +63,50 @@ enum {
enum {
ALC260_BASIC,
ALC260_HP,
- ALC260_FUJITSU_S702x,
+ ALC260_HP_3013,
+ ALC260_FUJITSU_S702X,
+ ALC260_ACER,
+#ifdef CONFIG_SND_DEBUG
+ ALC260_TEST,
+#endif
+ ALC260_AUTO,
ALC260_MODEL_LAST /* last tag */
};
-/* amp values */
-#define AMP_IN_MUTE(idx) (0x7080 | ((idx)<<8))
-#define AMP_IN_UNMUTE(idx) (0x7000 | ((idx)<<8))
-#define AMP_OUT_MUTE 0xb080
-#define AMP_OUT_UNMUTE 0xb000
-#define AMP_OUT_ZERO 0xb000
-/* pinctl values */
-#define PIN_IN 0x20
-#define PIN_VREF80 0x24
-#define PIN_VREF50 0x21
-#define PIN_OUT 0x40
-#define PIN_HP 0xc0
-#define PIN_HP_AMP 0x80
+/* ALC262 models */
+enum {
+ ALC262_BASIC,
+ ALC262_FUJITSU,
+ ALC262_AUTO,
+ ALC262_MODEL_LAST /* last tag */
+};
+
+/* ALC861 models */
+enum {
+ ALC861_3ST,
+ ALC861_3ST_DIG,
+ ALC861_6ST_DIG,
+ ALC861_AUTO,
+ ALC861_MODEL_LAST,
+};
+
+/* ALC882 models */
+enum {
+ ALC882_3ST_DIG,
+ ALC882_6ST_DIG,
+ ALC882_AUTO,
+ ALC882_MODEL_LAST,
+};
+
+/* for GPIO Poll */
+#define GPIO_MASK 0x03
struct alc_spec {
/* codec parameterization */
- snd_kcontrol_new_t *mixers[3]; /* mixer arrays */
+ snd_kcontrol_new_t *mixers[5]; /* mixer arrays */
unsigned int num_mixers;
- const struct hda_verb *init_verbs[3]; /* initialization verbs
+ const struct hda_verb *init_verbs[5]; /* initialization verbs
* don't forget NULL termination!
*/
unsigned int num_init_verbs;
@@ -109,18 +135,46 @@ struct alc_spec {
unsigned int cur_mux[3];
/* channel model */
- const struct alc_channel_mode *channel_mode;
+ const struct hda_channel_mode *channel_mode;
int num_channel_mode;
/* PCM information */
- struct hda_pcm pcm_rec[2]; /* used in alc_build_pcms() */
+ struct hda_pcm pcm_rec[3]; /* used in alc_build_pcms() */
/* dynamic controls, init_verbs and input_mux */
struct auto_pin_cfg autocfg;
unsigned int num_kctl_alloc, num_kctl_used;
snd_kcontrol_new_t *kctl_alloc;
struct hda_input_mux private_imux;
- hda_nid_t private_dac_nids[4];
+ hda_nid_t private_dac_nids[5];
+
+ /* hooks */
+ void (*init_hook)(struct hda_codec *codec);
+ void (*unsol_event)(struct hda_codec *codec, unsigned int res);
+
+ /* for pin sensing */
+ unsigned int sense_updated: 1;
+ unsigned int jack_present: 1;
+};
+
+/*
+ * configuration template - to be copied to the spec instance
+ */
+struct alc_config_preset {
+ snd_kcontrol_new_t *mixers[5]; /* should be identical size with spec */
+ const struct hda_verb *init_verbs[5];
+ unsigned int num_dacs;
+ hda_nid_t *dac_nids;
+ hda_nid_t dig_out_nid; /* optional */
+ hda_nid_t hp_nid; /* optional */
+ unsigned int num_adc_nids;
+ hda_nid_t *adc_nids;
+ hda_nid_t dig_in_nid;
+ unsigned int num_channel_mode;
+ const struct hda_channel_mode *channel_mode;
+ const struct hda_input_mux *input_mux;
+ void (*unsol_event)(struct hda_codec *, unsigned int);
+ void (*init_hook)(struct hda_codec *);
};
@@ -157,114 +211,287 @@ static int alc_mux_enum_put(snd_kcontrol
/*
* channel mode setting
*/
-struct alc_channel_mode {
- int channels;
- const struct hda_verb *sequence;
-};
+static int alc_ch_mode_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct alc_spec *spec = codec->spec;
+ return snd_hda_ch_mode_info(codec, uinfo, spec->channel_mode,
+ spec->num_channel_mode);
+}
+
+static int alc_ch_mode_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct alc_spec *spec = codec->spec;
+ return snd_hda_ch_mode_get(codec, ucontrol, spec->channel_mode,
+ spec->num_channel_mode, spec->multiout.max_channels);
+}
-static int alc880_ch_mode_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
+static int alc_ch_mode_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
- int items = kcontrol->private_value ? (int)kcontrol->private_value : 2;
+ return snd_hda_ch_mode_put(codec, ucontrol, spec->channel_mode,
+ spec->num_channel_mode, &spec->multiout.max_channels);
+}
+
+/*
+ * Control the mode of pin widget settings via the mixer. "pc" is used
+ * instead of "%" to avoid consequences of accidently treating the % as
+ * being part of a format specifier. Maximum allowed length of a value is
+ * 63 characters plus NULL terminator.
+ *
+ * Note: some retasking pin complexes seem to ignore requests for input
+ * states other than HiZ (eg: PIN_VREFxx) and revert to HiZ if any of these
+ * are requested. Therefore order this list so that this behaviour will not
+ * cause problems when mixer clients move through the enum sequentially.
+ * NIDs 0x0f and 0x10 have been observed to have this behaviour.
+ */
+static char *alc_pin_mode_names[] = {
+ "Mic 50pc bias", "Mic 80pc bias",
+ "Line in", "Line out", "Headphone out",
+};
+static unsigned char alc_pin_mode_values[] = {
+ PIN_VREF50, PIN_VREF80, PIN_IN, PIN_OUT, PIN_HP,
+};
+/* The control can present all 5 options, or it can limit the options based
+ * in the pin being assumed to be exclusively an input or an output pin.
+ */
+#define ALC_PIN_DIR_IN 0x00
+#define ALC_PIN_DIR_OUT 0x01
+#define ALC_PIN_DIR_INOUT 0x02
+
+/* Info about the pin modes supported by the three different pin directions.
+ * For each direction the minimum and maximum values are given.
+ */
+static signed char alc_pin_mode_dir_info[3][2] = {
+ { 0, 2 }, /* ALC_PIN_DIR_IN */
+ { 3, 4 }, /* ALC_PIN_DIR_OUT */
+ { 0, 4 }, /* ALC_PIN_DIR_INOUT */
+};
+#define alc_pin_mode_min(_dir) (alc_pin_mode_dir_info[_dir][0])
+#define alc_pin_mode_max(_dir) (alc_pin_mode_dir_info[_dir][1])
+#define alc_pin_mode_n_items(_dir) \
+ (alc_pin_mode_max(_dir)-alc_pin_mode_min(_dir)+1)
+
+static int alc_pin_mode_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
+{
+ unsigned int item_num = uinfo->value.enumerated.item;
+ unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
- snd_assert(spec->channel_mode, return -ENXIO);
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
uinfo->count = 1;
- uinfo->value.enumerated.items = items;
- if (uinfo->value.enumerated.item >= items)
- uinfo->value.enumerated.item = items - 1;
- sprintf(uinfo->value.enumerated.name, "%dch",
- spec->channel_mode[uinfo->value.enumerated.item].channels);
+ uinfo->value.enumerated.items = alc_pin_mode_n_items(dir);
+
+ if (item_num<alc_pin_mode_min(dir) || item_num>alc_pin_mode_max(dir))
+ item_num = alc_pin_mode_min(dir);
+ strcpy(uinfo->value.enumerated.name, alc_pin_mode_names[item_num]);
return 0;
}
-static int alc880_ch_mode_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
+static int alc_pin_mode_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
{
+ unsigned int i;
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct alc_spec *spec = codec->spec;
- int items = kcontrol->private_value ? (int)kcontrol->private_value : 2;
- int i;
+ hda_nid_t nid = kcontrol->private_value & 0xffff;
+ unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
+ long *valp = ucontrol->value.integer.value;
+ unsigned int pinctl = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_PIN_WIDGET_CONTROL,0x00);
- snd_assert(spec->channel_mode, return -ENXIO);
- for (i = 0; i < items; i++) {
- if (spec->multiout.max_channels == spec->channel_mode[i].channels) {
- ucontrol->value.enumerated.item[0] = i;
- break;
- }
- }
+ /* Find enumerated value for current pinctl setting */
+ i = alc_pin_mode_min(dir);
+ while (alc_pin_mode_values[i]!=pinctl && i<=alc_pin_mode_max(dir))
+ i++;
+ *valp = i<=alc_pin_mode_max(dir)?i:alc_pin_mode_min(dir);
return 0;
}
-static int alc880_ch_mode_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
+static int alc_pin_mode_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
{
+ signed int change;
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct alc_spec *spec = codec->spec;
- int mode;
+ hda_nid_t nid = kcontrol->private_value & 0xffff;
+ unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
+ long val = *ucontrol->value.integer.value;
+ unsigned int pinctl = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_PIN_WIDGET_CONTROL,0x00);
- snd_assert(spec->channel_mode, return -ENXIO);
- mode = ucontrol->value.enumerated.item[0] ? 1 : 0;
- if (spec->multiout.max_channels == spec->channel_mode[mode].channels &&
- ! codec->in_resume)
- return 0;
+ if (val<alc_pin_mode_min(dir) || val>alc_pin_mode_max(dir))
+ val = alc_pin_mode_min(dir);
- /* change the current channel setting */
- spec->multiout.max_channels = spec->channel_mode[mode].channels;
- if (spec->channel_mode[mode].sequence)
- snd_hda_sequence_write(codec, spec->channel_mode[mode].sequence);
+ change = pinctl != alc_pin_mode_values[val];
+ if (change) {
+ /* Set pin mode to that requested */
+ snd_hda_codec_write(codec,nid,0,AC_VERB_SET_PIN_WIDGET_CONTROL,
+ alc_pin_mode_values[val]);
- return 1;
+ /* Also enable the retasking pin's input/output as required
+ * for the requested pin mode. Enum values of 2 or less are
+ * input modes.
+ *
+ * Dynamically switching the input/output buffers probably
+ * reduces noise slightly, particularly on input. However,
+ * havingboth input and output buffers enabled
+ * simultaneously doesn't seem to be problematic.
+ */
+ if (val <= 2) {
+ snd_hda_codec_write(codec,nid,0,AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_MUTE);
+ snd_hda_codec_write(codec,nid,0,AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_IN_UNMUTE(0));
+ } else {
+ snd_hda_codec_write(codec,nid,0,AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_IN_MUTE(0));
+ snd_hda_codec_write(codec,nid,0,AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_UNMUTE);
+ }
+ }
+ return change;
}
-
-/*
- * Control of pin widget settings via the mixer. Only boolean settings are
- * supported, so VrefEn can't be controlled using these functions as they
- * stand.
+#define ALC_PIN_MODE(xname, nid, dir) \
+ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
+ .info = alc_pin_mode_info, \
+ .get = alc_pin_mode_get, \
+ .put = alc_pin_mode_put, \
+ .private_value = nid | (dir<<16) }
+
+/* A switch control for ALC260 GPIO pins. Multiple GPIOs can be ganged
+ * together using a mask with more than one bit set. This control is
+ * currently used only by the ALC260 test model. At this stage they are not
+ * needed for any "production" models.
*/
-static int alc_pinctl_switch_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
+#ifdef CONFIG_SND_DEBUG
+static int alc_gpio_data_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
uinfo->count = 1;
uinfo->value.integer.min = 0;
uinfo->value.integer.max = 1;
return 0;
-}
-
-static int alc_pinctl_switch_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
+}
+static int alc_gpio_data_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
hda_nid_t nid = kcontrol->private_value & 0xffff;
- long mask = (kcontrol->private_value >> 16) & 0xff;
+ unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
long *valp = ucontrol->value.integer.value;
+ unsigned int val = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_GPIO_DATA,0x00);
- *valp = 0;
- if (snd_hda_codec_read(codec,nid,0,AC_VERB_GET_PIN_WIDGET_CONTROL,0x00) & mask)
- *valp = 1;
+ *valp = (val & mask) != 0;
return 0;
}
+static int alc_gpio_data_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
+{
+ signed int change;
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ hda_nid_t nid = kcontrol->private_value & 0xffff;
+ unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
+ long val = *ucontrol->value.integer.value;
+ unsigned int gpio_data = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_GPIO_DATA,0x00);
+
+ /* Set/unset the masked GPIO bit(s) as needed */
+ change = (val==0?0:mask) != (gpio_data & mask);
+ if (val==0)
+ gpio_data &= ~mask;
+ else
+ gpio_data |= mask;
+ snd_hda_codec_write(codec,nid,0,AC_VERB_SET_GPIO_DATA,gpio_data);
-static int alc_pinctl_switch_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
+ return change;
+}
+#define ALC_GPIO_DATA_SWITCH(xname, nid, mask) \
+ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
+ .info = alc_gpio_data_info, \
+ .get = alc_gpio_data_get, \
+ .put = alc_gpio_data_put, \
+ .private_value = nid | (mask<<16) }
+#endif /* CONFIG_SND_DEBUG */
+
+/* A switch control to allow the enabling of the digital IO pins on the
+ * ALC260. This is incredibly simplistic; the intention of this control is
+ * to provide something in the test model allowing digital outputs to be
+ * identified if present. If models are found which can utilise these
+ * outputs a more complete mixer control can be devised for those models if
+ * necessary.
+ */
+#ifdef CONFIG_SND_DEBUG
+static int alc_spdif_ctrl_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+static int alc_spdif_ctrl_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
hda_nid_t nid = kcontrol->private_value & 0xffff;
- long mask = (kcontrol->private_value >> 16) & 0xff;
+ unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
long *valp = ucontrol->value.integer.value;
- unsigned int pinctl = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_PIN_WIDGET_CONTROL,0x00);
- int change = ((pinctl & mask)!=0) != *valp;
+ unsigned int val = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_DIGI_CONVERT,0x00);
- if (change)
- snd_hda_codec_write(codec,nid,0,AC_VERB_SET_PIN_WIDGET_CONTROL,
- *valp?(pinctl|mask):(pinctl&~mask));
- return change;
+ *valp = (val & mask) != 0;
+ return 0;
}
+static int alc_spdif_ctrl_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
+{
+ signed int change;
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ hda_nid_t nid = kcontrol->private_value & 0xffff;
+ unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
+ long val = *ucontrol->value.integer.value;
+ unsigned int ctrl_data = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_DIGI_CONVERT,0x00);
+
+ /* Set/unset the masked control bit(s) as needed */
+ change = (val==0?0:mask) != (ctrl_data & mask);
+ if (val==0)
+ ctrl_data &= ~mask;
+ else
+ ctrl_data |= mask;
+ snd_hda_codec_write(codec,nid,0,AC_VERB_SET_DIGI_CONVERT_1,ctrl_data);
-#define ALC_PINCTL_SWITCH(xname, nid, mask) \
+ return change;
+}
+#define ALC_SPDIF_CTRL_SWITCH(xname, nid, mask) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
- .info = alc_pinctl_switch_info, \
- .get = alc_pinctl_switch_get, \
- .put = alc_pinctl_switch_put, \
- .private_value = (nid) | (mask<<16) }
+ .info = alc_spdif_ctrl_info, \
+ .get = alc_spdif_ctrl_get, \
+ .put = alc_spdif_ctrl_put, \
+ .private_value = nid | (mask<<16) }
+#endif /* CONFIG_SND_DEBUG */
+
+/*
+ * set up from the preset table
+ */
+static void setup_preset(struct alc_spec *spec, const struct alc_config_preset *preset)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(preset->mixers) && preset->mixers[i]; i++)
+ spec->mixers[spec->num_mixers++] = preset->mixers[i];
+ for (i = 0; i < ARRAY_SIZE(preset->init_verbs) && preset->init_verbs[i]; i++)
+ spec->init_verbs[spec->num_init_verbs++] = preset->init_verbs[i];
+
+ spec->channel_mode = preset->channel_mode;
+ spec->num_channel_mode = preset->num_channel_mode;
+
+ spec->multiout.max_channels = spec->channel_mode[0].channels;
+
+ spec->multiout.num_dacs = preset->num_dacs;
+ spec->multiout.dac_nids = preset->dac_nids;
+ spec->multiout.dig_out_nid = preset->dig_out_nid;
+ spec->multiout.hp_nid = preset->hp_nid;
+
+ spec->input_mux = preset->input_mux;
+
+ spec->num_adc_nids = preset->num_adc_nids;
+ spec->adc_nids = preset->adc_nids;
+ spec->dig_in_nid = preset->dig_in_nid;
+
+ spec->unsol_event = preset->unsol_event;
+ spec->init_hook = preset->init_hook;
+}
/*
* ALC880 3-stack model
@@ -286,6 +513,7 @@ static hda_nid_t alc880_adc_nids[3] = {
/* The datasheet says the node 0x07 is connected from inputs,
* but it shows zero connection in the real implementation on some devices.
+ * Note: this is a 915GAV bug, fixed on 915GLV
*/
static hda_nid_t alc880_adc_nids_alt[2] = {
/* ADC1-2 */
@@ -328,7 +556,7 @@ static struct hda_verb alc880_threestack
{ } /* end */
};
-static struct alc_channel_mode alc880_threestack_modes[2] = {
+static struct hda_channel_mode alc880_threestack_modes[2] = {
{ 2, alc880_threestack_ch2_init },
{ 6, alc880_threestack_ch6_init },
};
@@ -356,9 +584,9 @@ static snd_kcontrol_new_t alc880_three_s
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
- .info = alc880_ch_mode_info,
- .get = alc880_ch_mode_get,
- .put = alc880_ch_mode_put,
+ .info = alc_ch_mode_info,
+ .get = alc_ch_mode_get,
+ .put = alc_ch_mode_put,
},
{ } /* end */
};
@@ -443,7 +671,7 @@ static struct hda_verb alc880_fivestack_
{ } /* end */
};
-static struct alc_channel_mode alc880_fivestack_modes[2] = {
+static struct hda_channel_mode alc880_fivestack_modes[2] = {
{ 6, alc880_fivestack_ch6_init },
{ 8, alc880_fivestack_ch8_init },
};
@@ -473,7 +701,7 @@ static struct hda_input_mux alc880_6stac
};
/* fixed 8-channels */
-static struct alc_channel_mode alc880_sixstack_modes[1] = {
+static struct hda_channel_mode alc880_sixstack_modes[1] = {
{ 8, NULL },
};
@@ -501,9 +729,9 @@ static snd_kcontrol_new_t alc880_six_sta
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
- .info = alc880_ch_mode_info,
- .get = alc880_ch_mode_get,
- .put = alc880_ch_mode_put,
+ .info = alc_ch_mode_info,
+ .get = alc_ch_mode_get,
+ .put = alc_ch_mode_put,
},
{ } /* end */
};
@@ -540,7 +768,7 @@ static hda_nid_t alc880_w810_dac_nids[3]
};
/* fixed 6 channels */
-static struct alc_channel_mode alc880_w810_modes[1] = {
+static struct hda_channel_mode alc880_w810_modes[1] = {
{ 6, NULL }
};
@@ -572,7 +800,7 @@ static hda_nid_t alc880_z71v_dac_nids[1]
#define ALC880_Z71V_HP_DAC 0x03
/* fixed 2 channels */
-static struct alc_channel_mode alc880_2_jack_modes[1] = {
+static struct hda_channel_mode alc880_2_jack_modes[1] = {
{ 2, NULL }
};
@@ -645,9 +873,9 @@ static snd_kcontrol_new_t alc880_asus_mi
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
- .info = alc880_ch_mode_info,
- .get = alc880_ch_mode_get,
- .put = alc880_ch_mode_put,
+ .info = alc_ch_mode_info,
+ .get = alc_ch_mode_get,
+ .put = alc_ch_mode_put,
},
{ } /* end */
};
@@ -675,6 +903,33 @@ static snd_kcontrol_new_t alc880_pcbeep_
{ } /* end */
};
+/* TCL S700 */
+static snd_kcontrol_new_t alc880_tcl_s700_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Front Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0B, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0B, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0B, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0B, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* The multiple "Capture Source" controls confuse alsamixer
+ * So call somewhat different..
+ * FIXME: the controls appear in the "playback" view!
+ */
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 1,
+ .info = alc_mux_enum_info,
+ .get = alc_mux_enum_get,
+ .put = alc_mux_enum_put,
+ },
+ { } /* end */
+};
+
/*
* build control elements
*/
@@ -974,6 +1229,8 @@ static struct hda_verb alc880_gpio1_init
{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
+
+ { }
};
/* Enable GPIO mask and set output */
@@ -981,10 +1238,196 @@ static struct hda_verb alc880_gpio2_init
{0x01, AC_VERB_SET_GPIO_MASK, 0x02},
{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
{0x01, AC_VERB_SET_GPIO_DATA, 0x02},
+
+ { }
+};
+
+/* Clevo m520g init */
+static struct hda_verb alc880_pin_clevo_init_verbs[] = {
+ /* headphone output */
+ {0x11, AC_VERB_SET_CONNECT_SEL, 0x01},
+ /* line-out */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Line-in */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* CD */
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Mic1 (rear panel) */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Mic2 (front panel) */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* headphone */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* change to EAPD mode */
+ {0x20, AC_VERB_SET_COEF_INDEX, 0x07},
+ {0x20, AC_VERB_SET_PROC_COEF, 0x3060},
+
+ { }
+};
+
+static struct hda_verb alc880_pin_tcl_S700_init_verbs[] = {
+ /* Headphone output */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ /* Front output*/
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ /* Line In pin widget for input */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ /* CD pin widget for input */
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ /* Mic1 (rear panel) pin widget for input and vref at 80% */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+
+ /* change to EAPD mode */
+ {0x20, AC_VERB_SET_COEF_INDEX, 0x07},
+ {0x20, AC_VERB_SET_PROC_COEF, 0x3070},
+
+ { }
+};
+
+/*
+ * LG m1 express dual
+ *
+ * Pin assignment:
+ * Rear Line-In/Out (blue): 0x14
+ * Build-in Mic-In: 0x15
+ * Speaker-out: 0x17
+ * HP-Out (green): 0x1b
+ * Mic-In/Out (red): 0x19
+ * SPDIF-Out: 0x1e
+ */
+
+/* To make 5.1 output working (green=Front, blue=Surr, red=CLFE) */
+static hda_nid_t alc880_lg_dac_nids[3] = {
+ 0x05, 0x02, 0x03
+};
+
+/* seems analog CD is not working */
+static struct hda_input_mux alc880_lg_capture_source = {
+ .num_items = 3,
+ .items = {
+ { "Mic", 0x1 },
+ { "Line", 0x5 },
+ { "Internal Mic", 0x6 },
+ },
+};
+
+/* 2,4,6 channel modes */
+static struct hda_verb alc880_lg_ch2_init[] = {
+ /* set line-in and mic-in to input */
+ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { }
+};
+
+static struct hda_verb alc880_lg_ch4_init[] = {
+ /* set line-in to out and mic-in to input */
+ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
+ { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { }
+};
+
+static struct hda_verb alc880_lg_ch6_init[] = {
+ /* set line-in and mic-in to output */
+ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
+ { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
+ { }
+};
+
+static struct hda_channel_mode alc880_lg_ch_modes[3] = {
+ { 2, alc880_lg_ch2_init },
+ { 4, alc880_lg_ch4_init },
+ { 6, alc880_lg_ch6_init },
+};
+
+static snd_kcontrol_new_t alc880_lg_mixer[] = {
+ /* FIXME: it's not really "master" but front channels */
+ HDA_CODEC_VOLUME("Master Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Master Playback Switch", 0x0f, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Surround Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0d, 1, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0d, 2, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0d, 1, 2, HDA_INPUT),
+ HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0d, 2, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x06, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x06, HDA_INPUT),
+ HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x07, HDA_INPUT),
+ HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x07, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Channel Mode",
+ .info = alc_ch_mode_info,
+ .get = alc_ch_mode_get,
+ .put = alc_ch_mode_put,
+ },
+ { } /* end */
+};
+
+static struct hda_verb alc880_lg_init_verbs[] = {
+ /* set capture source to mic-in */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ /* mute all amp mixer inputs */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(5)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(6)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(7)},
+ /* line-in to input */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* built-in mic */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* speaker-out */
+ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* mic-in to input */
+ {0x11, AC_VERB_SET_CONNECT_SEL, 0x01},
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* HP-out */
+ {0x13, AC_VERB_SET_CONNECT_SEL, 0x03},
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* jack sense */
+ {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | 0x1},
+ { }
};
+/* toggle speaker-output according to the hp-jack state */
+static void alc880_lg_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+
+ present = snd_hda_codec_read(codec, 0x1b, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ snd_hda_codec_amp_update(codec, 0x17, 0, HDA_OUTPUT, 0,
+ 0x80, present ? 0x80 : 0);
+ snd_hda_codec_amp_update(codec, 0x17, 1, HDA_OUTPUT, 0,
+ 0x80, present ? 0x80 : 0);
+}
+
+static void alc880_lg_unsol_event(struct hda_codec *codec, unsigned int res)
+{
+ /* Looks like the unsol event is incompatible with the standard
+ * definition. 4bit tag is placed at 28 bit!
+ */
+ if ((res >> 28) == 0x01)
+ alc880_lg_automute(codec);
+}
/*
+ * Common callbacks
*/
static int alc_init(struct hda_codec *codec)
@@ -994,9 +1437,21 @@ static int alc_init(struct hda_codec *co
for (i = 0; i < spec->num_init_verbs; i++)
snd_hda_sequence_write(codec, spec->init_verbs[i]);
+
+ if (spec->init_hook)
+ spec->init_hook(codec);
+
return 0;
}
+static void alc_unsol_event(struct hda_codec *codec, unsigned int res)
+{
+ struct alc_spec *spec = codec->spec;
+
+ if (spec->unsol_event)
+ spec->unsol_event(codec, res);
+}
+
#ifdef CONFIG_PM
/*
* resume
@@ -1137,6 +1592,13 @@ static struct hda_pcm_stream alc880_pcm_
/* NID is set in alc_build_pcms */
};
+/* Used by alc_build_pcms to flag that a PCM has no playback stream */
+static struct hda_pcm_stream alc_pcm_null_playback = {
+ .substreams = 0,
+ .channels_min = 0,
+ .channels_max = 0,
+};
+
static int alc_build_pcms(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -1147,15 +1609,40 @@ static int alc_build_pcms(struct hda_cod
codec->pcm_info = info;
info->name = spec->stream_name_analog;
- info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_analog_playback);
- info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dac_nids[0];
- info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture);
- info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[0];
-
- info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = 0;
- for (i = 0; i < spec->num_channel_mode; i++) {
- if (spec->channel_mode[i].channels > info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max) {
- info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = spec->channel_mode[i].channels;
+ if (spec->stream_analog_playback) {
+ snd_assert(spec->multiout.dac_nids, return -EINVAL);
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_analog_playback);
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dac_nids[0];
+ }
+ if (spec->stream_analog_capture) {
+ snd_assert(spec->adc_nids, return -EINVAL);
+ info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture);
+ info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[0];
+ }
+
+ if (spec->channel_mode) {
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = 0;
+ for (i = 0; i < spec->num_channel_mode; i++) {
+ if (spec->channel_mode[i].channels > info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max) {
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = spec->channel_mode[i].channels;
+ }
+ }
+ }
+
+ /* If the use of more than one ADC is requested for the current
+ * model, configure a second analog capture-only PCM.
+ */
+ if (spec->num_adc_nids > 1) {
+ codec->num_pcms++;
+ info++;
+ info->name = spec->stream_name_analog;
+ /* No playback stream for second PCM */
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK] = alc_pcm_null_playback;
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = 0;
+ if (spec->stream_analog_capture) {
+ snd_assert(spec->adc_nids, return -EINVAL);
+ info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture);
+ info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[1];
}
}
@@ -1163,11 +1650,13 @@ static int alc_build_pcms(struct hda_cod
codec->num_pcms++;
info++;
info->name = spec->stream_name_digital;
- if (spec->multiout.dig_out_nid) {
+ if (spec->multiout.dig_out_nid &&
+ spec->stream_digital_playback) {
info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_digital_playback);
info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dig_out_nid;
}
- if (spec->dig_in_nid) {
+ if (spec->dig_in_nid &&
+ spec->stream_digital_capture) {
info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_digital_capture);
info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in_nid;
}
@@ -1199,6 +1688,7 @@ static struct hda_codec_ops alc_patch_op
.build_pcms = alc_build_pcms,
.init = alc_init,
.free = alc_free,
+ .unsol_event = alc_unsol_event,
#ifdef CONFIG_PM
.resume = alc_resume,
#endif
@@ -1217,17 +1707,19 @@ static hda_nid_t alc880_test_dac_nids[4]
};
static struct hda_input_mux alc880_test_capture_source = {
- .num_items = 5,
+ .num_items = 7,
.items = {
{ "In-1", 0x0 },
{ "In-2", 0x1 },
{ "In-3", 0x2 },
{ "In-4", 0x3 },
{ "CD", 0x4 },
+ { "Front", 0x5 },
+ { "Surround", 0x6 },
},
};
-static struct alc_channel_mode alc880_test_modes[4] = {
+static struct hda_channel_mode alc880_test_modes[4] = {
{ 2, NULL },
{ 4, NULL },
{ 6, NULL },
@@ -1393,9 +1885,9 @@ static snd_kcontrol_new_t alc880_test_mi
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
- .info = alc880_ch_mode_info,
- .get = alc880_ch_mode_get,
- .put = alc880_ch_mode_put,
+ .info = alc_ch_mode_info,
+ .get = alc_ch_mode_get,
+ .put = alc_ch_mode_put,
},
{ } /* end */
};
@@ -1491,6 +1983,8 @@ static struct hda_board_config alc880_cf
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x4038, .config = ALC880_3ST },
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x4040, .config = ALC880_3ST },
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x4041, .config = ALC880_3ST },
+ /* TCL S700 */
+ { .pci_subvendor = 0x19db, .pci_subdevice = 0x4188, .config = ALC880_TCL_S700 },
/* Back 3 jack, front 2 jack (Internal add Aux-In) */
{ .pci_subvendor = 0x1025, .pci_subdevice = 0xe310, .config = ALC880_3ST },
@@ -1501,6 +1995,8 @@ static struct hda_board_config alc880_cf
{ .modelname = "3stack-digout", .config = ALC880_3ST_DIG },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe308, .config = ALC880_3ST_DIG },
{ .pci_subvendor = 0x1025, .pci_subdevice = 0x0070, .config = ALC880_3ST_DIG },
+ /* Clevo m520G NB */
+ { .pci_subvendor = 0x1558, .pci_subdevice = 0x0520, .config = ALC880_CLEVO },
/* Back 3 jack plus 1 SPDIF out jack, front 2 jack (Internal add Aux-In)*/
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe305, .config = ALC880_3ST_DIG },
@@ -1538,13 +2034,21 @@ static struct hda_board_config alc880_cf
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1964, .config = ALC880_Z71V },
{ .modelname = "6stack", .config = ALC880_6ST },
+ { .pci_subvendor = 0x1043, .pci_subdevice = 0x8196, .config = ALC880_6ST }, /* ASUS P5GD1-HVM */
+ { .pci_subvendor = 0x1043, .pci_subdevice = 0x81b4, .config = ALC880_6ST },
{ .pci_subvendor = 0x1019, .pci_subdevice = 0xa884, .config = ALC880_6ST }, /* Acer APFV */
+ { .pci_subvendor = 0x1458, .pci_subdevice = 0xa102, .config = ALC880_6ST }, /* Gigabyte K8N51 */
{ .modelname = "6stack-digout", .config = ALC880_6ST_DIG },
{ .pci_subvendor = 0x2668, .pci_subdevice = 0x8086, .config = ALC880_6ST_DIG },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0x2668, .config = ALC880_6ST_DIG },
{ .pci_subvendor = 0x1462, .pci_subdevice = 0x1150, .config = ALC880_6ST_DIG },
{ .pci_subvendor = 0xe803, .pci_subdevice = 0x1019, .config = ALC880_6ST_DIG },
+ { .pci_subvendor = 0x1039, .pci_subdevice = 0x1234, .config = ALC880_6ST_DIG },
+ { .pci_subvendor = 0x1025, .pci_subdevice = 0x0077, .config = ALC880_6ST_DIG },
+ { .pci_subvendor = 0x1025, .pci_subdevice = 0x0078, .config = ALC880_6ST_DIG },
+ { .pci_subvendor = 0x1025, .pci_subdevice = 0x0087, .config = ALC880_6ST_DIG },
+ { .pci_subvendor = 0x1297, .pci_subdevice = 0xc790, .config = ALC880_6ST_DIG }, /* Shuttle ST20G5 */
{ .modelname = "asus", .config = ALC880_ASUS },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1964, .config = ALC880_ASUS_DIG },
@@ -1558,37 +2062,29 @@ static struct hda_board_config alc880_cf
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1123, .config = ALC880_ASUS_DIG },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1143, .config = ALC880_ASUS },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x10b3, .config = ALC880_ASUS_W1V },
+ { .pci_subvendor = 0x1558, .pci_subdevice = 0x5401, .config = ALC880_ASUS_DIG2 },
{ .modelname = "uniwill", .config = ALC880_UNIWILL_DIG },
{ .pci_subvendor = 0x1584, .pci_subdevice = 0x9050, .config = ALC880_UNIWILL_DIG },
{ .modelname = "F1734", .config = ALC880_F1734 },
{ .pci_subvendor = 0x1734, .pci_subdevice = 0x107c, .config = ALC880_F1734 },
+ { .pci_subvendor = 0x1584, .pci_subdevice = 0x9054, .config = ALC880_F1734 },
+
+ { .modelname = "lg", .config = ALC880_LG },
+ { .pci_subvendor = 0x1854, .pci_subdevice = 0x003b, .config = ALC880_LG },
#ifdef CONFIG_SND_DEBUG
{ .modelname = "test", .config = ALC880_TEST },
#endif
+ { .modelname = "auto", .config = ALC880_AUTO },
{}
};
/*
- * configuration template - to be copied to the spec instance
+ * ALC880 codec presets
*/
-struct alc_config_preset {
- snd_kcontrol_new_t *mixers[4];
- const struct hda_verb *init_verbs[4];
- unsigned int num_dacs;
- hda_nid_t *dac_nids;
- hda_nid_t dig_out_nid; /* optional */
- hda_nid_t hp_nid; /* optional */
- unsigned int num_adc_nids;
- hda_nid_t *adc_nids;
- unsigned int num_channel_mode;
- const struct alc_channel_mode *channel_mode;
- const struct hda_input_mux *input_mux;
-};
-
static struct alc_config_preset alc880_presets[] = {
[ALC880_3ST] = {
.mixers = { alc880_three_stack_mixer },
@@ -1609,6 +2105,18 @@ static struct alc_config_preset alc880_p
.channel_mode = alc880_threestack_modes,
.input_mux = &alc880_capture_source,
},
+ [ALC880_TCL_S700] = {
+ .mixers = { alc880_tcl_s700_mixer },
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_pin_tcl_S700_init_verbs,
+ alc880_gpio2_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc880_dac_nids),
+ .dac_nids = alc880_dac_nids,
+ .hp_nid = 0x03,
+ .num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
+ .channel_mode = alc880_2_jack_modes,
+ .input_mux = &alc880_capture_source,
+ },
[ALC880_5ST] = {
.mixers = { alc880_three_stack_mixer, alc880_five_stack_mixer},
.init_verbs = { alc880_volume_init_verbs, alc880_pin_5stack_init_verbs },
@@ -1700,6 +2208,17 @@ static struct alc_config_preset alc880_p
.channel_mode = alc880_asus_modes,
.input_mux = &alc880_capture_source,
},
+ [ALC880_ASUS_DIG2] = {
+ .mixers = { alc880_asus_mixer },
+ .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
+ alc880_gpio2_init_verbs }, /* use GPIO2 */
+ .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
+ .dac_nids = alc880_asus_dac_nids,
+ .dig_out_nid = ALC880_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
+ .channel_mode = alc880_asus_modes,
+ .input_mux = &alc880_capture_source,
+ },
[ALC880_ASUS_W1V] = {
.mixers = { alc880_asus_mixer, alc880_asus_w1v_mixer },
.init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
@@ -1721,13 +2240,37 @@ static struct alc_config_preset alc880_p
.channel_mode = alc880_asus_modes,
.input_mux = &alc880_capture_source,
},
-#ifdef CONFIG_SND_DEBUG
- [ALC880_TEST] = {
- .mixers = { alc880_test_mixer },
- .init_verbs = { alc880_test_init_verbs },
- .num_dacs = ARRAY_SIZE(alc880_test_dac_nids),
- .dac_nids = alc880_test_dac_nids,
- .dig_out_nid = ALC880_DIGOUT_NID,
+ [ALC880_CLEVO] = {
+ .mixers = { alc880_three_stack_mixer },
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_pin_clevo_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc880_dac_nids),
+ .dac_nids = alc880_dac_nids,
+ .hp_nid = 0x03,
+ .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
+ .channel_mode = alc880_threestack_modes,
+ .input_mux = &alc880_capture_source,
+ },
+ [ALC880_LG] = {
+ .mixers = { alc880_lg_mixer },
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_lg_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc880_lg_dac_nids),
+ .dac_nids = alc880_lg_dac_nids,
+ .dig_out_nid = ALC880_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc880_lg_ch_modes),
+ .channel_mode = alc880_lg_ch_modes,
+ .input_mux = &alc880_lg_capture_source,
+ .unsol_event = alc880_lg_unsol_event,
+ .init_hook = alc880_lg_automute,
+ },
+#ifdef CONFIG_SND_DEBUG
+ [ALC880_TEST] = {
+ .mixers = { alc880_test_mixer },
+ .init_verbs = { alc880_test_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc880_test_dac_nids),
+ .dac_nids = alc880_test_dac_nids,
+ .dig_out_nid = ALC880_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc880_test_modes),
.channel_mode = alc880_test_modes,
.input_mux = &alc880_test_capture_source,
@@ -1832,7 +2375,8 @@ static int alc880_auto_fill_dac_nids(str
}
/* add playback controls from the parsed DAC table */
-static int alc880_auto_create_multi_out_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
+static int alc880_auto_create_multi_out_ctls(struct alc_spec *spec,
+ const struct auto_pin_cfg *cfg)
{
char name[32];
static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" };
@@ -1868,15 +2412,16 @@ static int alc880_auto_create_multi_out_
return err;
}
}
-
return 0;
}
-/* add playback controls for HP output */
-static int alc880_auto_create_hp_ctls(struct alc_spec *spec, hda_nid_t pin)
+/* add playback controls for speaker and HP outputs */
+static int alc880_auto_create_extra_out(struct alc_spec *spec, hda_nid_t pin,
+ const char *pfx)
{
hda_nid_t nid;
int err;
+ char name[32];
if (! pin)
return 0;
@@ -1889,14 +2434,16 @@ static int alc880_auto_create_hp_ctls(st
if (! spec->multiout.num_dacs)
spec->multiout.num_dacs = 1;
} else
- /* specify the DAC as the extra HP output */
+ /* specify the DAC as the extra output */
spec->multiout.hp_nid = nid;
/* control HP volume/switch on the output mixer amp */
nid = alc880_idx_to_mixer(alc880_fixed_pin_idx(pin));
- if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Headphone Playback Volume",
+ sprintf(name, "%s Playback Volume", pfx);
+ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
return err;
- if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "Headphone Playback Switch",
+ sprintf(name, "%s Playback Switch", pfx);
+ if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name,
HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT))) < 0)
return err;
} else if (alc880_is_multi_pin(pin)) {
@@ -1908,7 +2455,8 @@ static int alc880_auto_create_hp_ctls(st
spec->multiout.num_dacs = 1;
}
/* we have only a switch on HP-out PIN */
- if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
+ sprintf(name, "%s Playback Switch", pfx);
+ if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT))) < 0)
return err;
}
@@ -1916,38 +2464,39 @@ static int alc880_auto_create_hp_ctls(st
}
/* create input playback/capture controls for the given pin */
-static int new_analog_input(struct alc_spec *spec, hda_nid_t pin, const char *ctlname)
+static int new_analog_input(struct alc_spec *spec, hda_nid_t pin, const char *ctlname,
+ int idx, hda_nid_t mix_nid)
{
char name[32];
- int err, idx;
+ int err;
sprintf(name, "%s Playback Volume", ctlname);
- idx = alc880_input_pin_idx(pin);
if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
- HDA_COMPOSE_AMP_VAL(0x0b, 3, idx, HDA_INPUT))) < 0)
+ HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT))) < 0)
return err;
sprintf(name, "%s Playback Switch", ctlname);
if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
- HDA_COMPOSE_AMP_VAL(0x0b, 3, idx, HDA_INPUT))) < 0)
+ HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT))) < 0)
return err;
return 0;
}
/* create playback/capture controls for input pins */
-static int alc880_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
+static int alc880_auto_create_analog_input_ctls(struct alc_spec *spec,
+ const struct auto_pin_cfg *cfg)
{
- static char *labels[AUTO_PIN_LAST] = {
- "Mic", "Front Mic", "Line", "Front Line", "CD", "Aux"
- };
struct hda_input_mux *imux = &spec->private_imux;
- int i, err;
+ int i, err, idx;
for (i = 0; i < AUTO_PIN_LAST; i++) {
if (alc880_is_input_pin(cfg->input_pins[i])) {
- err = new_analog_input(spec, cfg->input_pins[i], labels[i]);
+ idx = alc880_input_pin_idx(cfg->input_pins[i]);
+ err = new_analog_input(spec, cfg->input_pins[i],
+ auto_pin_cfg_labels[i],
+ idx, 0x0b);
if (err < 0)
return err;
- imux->items[imux->num_items].label = labels[i];
+ imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
imux->items[imux->num_items].index = alc880_input_pin_idx(cfg->input_pins[i]);
imux->num_items++;
}
@@ -1955,7 +2504,8 @@ static int alc880_auto_create_analog_inp
return 0;
}
-static void alc880_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid, int pin_type,
+static void alc880_auto_set_output_and_unmute(struct hda_codec *codec,
+ hda_nid_t nid, int pin_type,
int dac_idx)
{
/* set as output */
@@ -1982,11 +2532,14 @@ static void alc880_auto_init_multi_out(s
}
}
-static void alc880_auto_init_hp_out(struct hda_codec *codec)
+static void alc880_auto_init_extra_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
hda_nid_t pin;
+ pin = spec->autocfg.speaker_pin;
+ if (pin) /* connect to front */
+ alc880_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
pin = spec->autocfg.hp_pin;
if (pin) /* connect to front */
alc880_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
@@ -2015,15 +2568,21 @@ static int alc880_parse_auto_config(stru
{
struct alc_spec *spec = codec->spec;
int err;
+ static hda_nid_t alc880_ignore[] = { 0x1d, 0 };
- if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg)) < 0)
+ if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
+ alc880_ignore)) < 0)
return err;
- if ((err = alc880_auto_fill_dac_nids(spec, &spec->autocfg)) < 0)
- return err;
- if (! spec->autocfg.line_outs && ! spec->autocfg.hp_pin)
+ if (! spec->autocfg.line_outs && ! spec->autocfg.speaker_pin &&
+ ! spec->autocfg.hp_pin)
return 0; /* can't find valid BIOS pin config */
- if ((err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
- (err = alc880_auto_create_hp_ctls(spec, spec->autocfg.hp_pin)) < 0 ||
+
+ if ((err = alc880_auto_fill_dac_nids(spec, &spec->autocfg)) < 0 ||
+ (err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
+ (err = alc880_auto_create_extra_out(spec, spec->autocfg.speaker_pin,
+ "Speaker")) < 0 ||
+ (err = alc880_auto_create_extra_out(spec, spec->autocfg.speaker_pin,
+ "Headphone")) < 0 ||
(err = alc880_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
return err;
@@ -2044,14 +2603,12 @@ static int alc880_parse_auto_config(stru
return 1;
}
-/* init callback for auto-configuration model -- overriding the default init */
-static int alc880_auto_init(struct hda_codec *codec)
+/* additional initialization for auto-configuration model */
+static void alc880_auto_init(struct hda_codec *codec)
{
- alc_init(codec);
alc880_auto_init_multi_out(codec);
- alc880_auto_init_hp_out(codec);
+ alc880_auto_init_extra_out(codec);
alc880_auto_init_analog_input(codec);
- return 0;
}
/*
@@ -2062,7 +2619,7 @@ static int patch_alc880(struct hda_codec
{
struct alc_spec *spec;
int board_config;
- int i, err;
+ int err;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
@@ -2088,36 +2645,8 @@ static int patch_alc880(struct hda_codec
}
}
- if (board_config != ALC880_AUTO) {
- /* set up from the preset table */
- const struct alc_config_preset *preset;
-
- preset = &alc880_presets[board_config];
-
- for (i = 0; preset->mixers[i]; i++) {
- snd_assert(spec->num_mixers < ARRAY_SIZE(spec->mixers), break);
- spec->mixers[spec->num_mixers++] = preset->mixers[i];
- }
- for (i = 0; preset->init_verbs[i]; i++) {
- snd_assert(spec->num_init_verbs < ARRAY_SIZE(spec->init_verbs), break);
- spec->init_verbs[spec->num_init_verbs++] = preset->init_verbs[i];
- }
-
- spec->channel_mode = preset->channel_mode;
- spec->num_channel_mode = preset->num_channel_mode;
-
- spec->multiout.max_channels = spec->channel_mode[0].channels;
-
- spec->multiout.num_dacs = preset->num_dacs;
- spec->multiout.dac_nids = preset->dac_nids;
- spec->multiout.dig_out_nid = preset->dig_out_nid;
- spec->multiout.hp_nid = preset->hp_nid;
-
- spec->input_mux = preset->input_mux;
-
- spec->num_adc_nids = preset->num_adc_nids;
- spec->adc_nids = preset->adc_nids;
- }
+ if (board_config != ALC880_AUTO)
+ setup_preset(spec, &alc880_presets[board_config]);
spec->stream_name_analog = "ALC880 Analog";
spec->stream_analog_playback = &alc880_pcm_analog_playback;
@@ -2129,8 +2658,7 @@ static int patch_alc880(struct hda_codec
if (! spec->adc_nids && spec->input_mux) {
/* check whether NID 0x07 is valid */
- unsigned int wcap = snd_hda_param_read(codec, alc880_adc_nids[0],
- AC_PAR_AUDIO_WIDGET_CAP);
+ unsigned int wcap = get_wcaps(codec, alc880_adc_nids[0]);
wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
if (wcap != AC_WID_AUD_IN) {
spec->adc_nids = alc880_adc_nids_alt;
@@ -2147,7 +2675,7 @@ static int patch_alc880(struct hda_codec
codec->patch_ops = alc_patch_ops;
if (board_config == ALC880_AUTO)
- codec->patch_ops.init = alc880_auto_init;
+ spec->init_hook = alc880_auto_init;
return 0;
}
@@ -2167,11 +2695,24 @@ static hda_nid_t alc260_adc_nids[1] = {
0x04,
};
-static hda_nid_t alc260_hp_adc_nids[1] = {
+static hda_nid_t alc260_adc_nids_alt[1] = {
/* ADC1 */
0x05,
};
+static hda_nid_t alc260_hp_adc_nids[2] = {
+ /* ADC1, 0 */
+ 0x05, 0x04
+};
+
+/* NIDs used when simultaneous access to both ADCs makes sense. Note that
+ * alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC.
+ */
+static hda_nid_t alc260_dual_adc_nids[2] = {
+ /* ADC0, ADC1 */
+ 0x04, 0x05
+};
+
#define ALC260_DIGOUT_NID 0x03
#define ALC260_DIGIN_NID 0x06
@@ -2185,14 +2726,28 @@ static struct hda_input_mux alc260_captu
},
};
-/* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack
- * and the internal CD lines.
+/* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack,
+ * headphone jack and the internal CD lines.
*/
static struct hda_input_mux alc260_fujitsu_capture_source = {
- .num_items = 2,
+ .num_items = 3,
.items = {
{ "Mic/Line", 0x0 },
{ "CD", 0x4 },
+ { "Headphone", 0x2 },
+ },
+};
+
+/* Acer TravelMate(/Extensa/Aspire) notebooks have similar configutation to
+ * the Fujitsu S702x, but jacks are marked differently. We won't allow
+ * retasking the Headphone jack, so it won't be available here.
+ */
+static struct hda_input_mux alc260_acer_capture_source = {
+ .num_items = 3,
+ .items = {
+ { "Mic", 0x0 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
},
};
@@ -2202,42 +2757,31 @@ static struct hda_input_mux alc260_fujit
* element which allows changing the channel mode, so the verb list is
* never used.
*/
-static struct alc_channel_mode alc260_modes[1] = {
+static struct hda_channel_mode alc260_modes[1] = {
{ 2, NULL },
};
-static snd_kcontrol_new_t alc260_base_mixer[] = {
+
+/* Mixer combinations
+ *
+ * basic: base_output + input + pc_beep + capture
+ * HP: base_output + input + capture_alt
+ * HP_3013: hp_3013 + input + capture
+ * fujitsu: fujitsu + capture
+ * acer: acer + capture
+ */
+
+static snd_kcontrol_new_t alc260_base_output_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT),
- HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x07, 0x05, HDA_INPUT),
- HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x07, 0x05, HDA_INPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x04, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x04, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
{ } /* end */
-};
+};
-static snd_kcontrol_new_t alc260_hp_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
+static snd_kcontrol_new_t alc260_input_mixer[] = {
HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
@@ -2246,39 +2790,93 @@ static snd_kcontrol_new_t alc260_hp_mixe
HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
- HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x05, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x05, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
+ { } /* end */
+};
+
+static snd_kcontrol_new_t alc260_pc_beep_mixer[] = {
+ HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x07, 0x05, HDA_INPUT),
+ HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x07, 0x05, HDA_INPUT),
+ { } /* end */
+};
+
+static snd_kcontrol_new_t alc260_hp_3013_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Front Playback Switch", 0x10, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Aux-In Playback Volume", 0x07, 0x06, HDA_INPUT),
+ HDA_CODEC_MUTE("Aux-In Playback Switch", 0x07, 0x06, HDA_INPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("iSpeaker Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("iSpeaker Playback Switch", 0x11, 1, 0x0, HDA_OUTPUT),
{ } /* end */
};
static snd_kcontrol_new_t alc260_fujitsu_mixer[] = {
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Headphone Playback Switch", 0x08, 2, HDA_INPUT),
- ALC_PINCTL_SWITCH("Headphone Amp Switch", 0x14, PIN_HP_AMP),
+ ALC_PIN_MODE("Headphone Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT),
+ ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN),
HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT),
HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Internal Speaker Playback Switch", 0x09, 2, HDA_INPUT),
+ { } /* end */
+};
+
+static snd_kcontrol_new_t alc260_acer_mixer[] = {
+ HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+ ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
+ ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
+ HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT),
+ HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT),
+ { } /* end */
+};
+
+/* capture mixer elements */
+static snd_kcontrol_new_t alc260_capture_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x04, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x04, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x05, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x05, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
+ /* The multiple "Capture Source" controls confuse alsamixer
+ * So call somewhat different..
+ * FIXME: the controls appear in the "playback" view!
+ */
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 2,
+ .info = alc_mux_enum_info,
+ .get = alc_mux_enum_get,
+ .put = alc_mux_enum_put,
+ },
+ { } /* end */
+};
+
+static snd_kcontrol_new_t alc260_capture_alt_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x05, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x05, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* The multiple "Capture Source" controls confuse alsamixer
+ * So call somewhat different..
+ * FIXME: the controls appear in the "playback" view!
+ */
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 1,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
@@ -2286,6 +2884,9 @@ static snd_kcontrol_new_t alc260_fujitsu
{ } /* end */
};
+/*
+ * initialization verbs
+ */
static struct hda_verb alc260_init_verbs[] = {
/* Line In pin widget for input */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
@@ -2298,7 +2899,7 @@ static struct hda_verb alc260_init_verbs
/* LINE-2 is used for line-out in rear */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* select line-out */
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
/* LINE-OUT pin */
{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* enable HP */
@@ -2347,6 +2948,100 @@ static struct hda_verb alc260_init_verbs
{ }
};
+static struct hda_verb alc260_hp_init_verbs[] = {
+ /* Headphone and output */
+ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
+ /* mono output */
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+ /* Mic1 (rear panel) pin widget for input and vref at 80% */
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+ /* Mic2 (front panel) pin widget for input and vref at 80% */
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+ /* Line In pin widget for input */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+ /* Line-2 pin widget for output */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+ /* CD pin widget for input */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+ /* unmute amp left and right */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
+ /* set connection select to line in (default select for this ADC) */
+ {0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
+ /* unmute Line-Out mixer amp left and right (volume = 0) */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+ /* mute pin widget amp left and right (no gain on this amp) */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+ /* unmute HP mixer amp left and right (volume = 0) */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+ /* mute pin widget amp left and right (no gain on this amp) */
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+ /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */
+ /* unmute CD */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
+ /* unmute Line In */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
+ /* unmute Mic */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
+ /* Unmute Front out path */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+ /* Unmute Headphone out path */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+ /* Unmute Mono out path */
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+ { }
+};
+
+static struct hda_verb alc260_hp_3013_init_verbs[] = {
+ /* Line out and output */
+ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+ /* mono output */
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+ /* Mic1 (rear panel) pin widget for input and vref at 80% */
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+ /* Mic2 (front panel) pin widget for input and vref at 80% */
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+ /* Line In pin widget for input */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+ /* Headphone pin widget for output */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
+ /* CD pin widget for input */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+ /* unmute amp left and right */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
+ /* set connection select to line in (default select for this ADC) */
+ {0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
+ /* unmute Line-Out mixer amp left and right (volume = 0) */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+ /* mute pin widget amp left and right (no gain on this amp) */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+ /* unmute HP mixer amp left and right (volume = 0) */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+ /* mute pin widget amp left and right (no gain on this amp) */
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+ /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */
+ /* unmute CD */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
+ /* unmute Line In */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
+ /* unmute Mic */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
+ /* Unmute Front out path */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+ /* Unmute Headphone out path */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+ /* Unmute Mono out path */
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+ { }
+};
+
/* Initialisation sequence for ALC260 as configured in Fujitsu S702x
* laptops.
*/
@@ -2357,145 +3052,750 @@ static struct hda_verb alc260_fujitsu_in
{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
/* Headphone/Line-out jack connects to Line1 pin; make it an output */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* Mic/Line-in jack is connected to mic1 pin, so make it an input */
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- /* Ensure all other unused pins are disabled and muted.
- * Note: trying to set widget 0x15 to anything blocks all audio
- * output for some reason, so just leave that at the default.
- */
- {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ /* Mic/Line-in jack is connected to mic1 pin, so make it an input */
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ /* Ensure all other unused pins are disabled and muted. */
+ {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- /* Disable digital (SPDIF) pins */
- {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
- {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
-
- /* Start with mixer outputs muted */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-
- /* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Unmute Line1 pin widget amp left and right (no equiv mixer ctrl) */
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Unmute pin widget used for Line-in (no equiv mixer ctrl) */
- {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* Mute capture amp left and right */
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- /* Set ADC connection select to line in (on mic1 pin) */
- {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* Mute all inputs to mixer widget (even unconnected ones) */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
-};
+ {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+
+ /* Disable digital (SPDIF) pins */
+ {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
+ {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
-static struct hda_pcm_stream alc260_pcm_analog_playback = {
- .substreams = 1,
- .channels_min = 2,
- .channels_max = 2,
-};
+ /* Ensure Line1 pin widget takes its input from the OUT1 sum bus
+ * when acting as an output.
+ */
+ {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
-static struct hda_pcm_stream alc260_pcm_analog_capture = {
- .substreams = 1,
- .channels_min = 2,
- .channels_max = 2,
-};
+ /* Start with output sum widgets muted and their output gains at min */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-static struct hda_board_config alc260_cfg_tbl[] = {
- { .modelname = "hp", .config = ALC260_HP },
- { .pci_subvendor = 0x103c, .config = ALC260_HP },
- { .modelname = "fujitsu", .config = ALC260_FUJITSU_S702x },
- { .pci_subvendor = 0x10cf, .pci_subdevice = 0x1326, .config = ALC260_FUJITSU_S702x },
- {}
-};
+ /* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Unmute Line1 pin widget output buffer since it starts as an output.
+ * If the pin mode is changed by the user the pin mode control will
+ * take care of enabling the pin's input/output buffers as needed.
+ * Therefore there's no need to enable the input buffer at this
+ * stage.
+ */
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Unmute input buffer of pin widget used for Line-in (no equiv
+ * mixer ctrl)
+ */
+ {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-static int patch_alc260(struct hda_codec *codec)
-{
- struct alc_spec *spec;
- int board_config;
+ /* Mute capture amp left and right */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ /* Set ADC connection select to match default mixer setting - line
+ * in (on mic1 pin)
+ */
+ {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
- spec = kzalloc(sizeof(*spec), GFP_KERNEL);
- if (spec == NULL)
- return -ENOMEM;
+ /* Do the same for the second ADC: mute capture input amp and
+ * set ADC connection to line in (on mic1 pin)
+ */
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
- codec->spec = spec;
+ /* Mute all inputs to mixer widget (even unconnected ones) */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
- board_config = snd_hda_check_board_config(codec, alc260_cfg_tbl);
- if (board_config < 0 || board_config >= ALC260_MODEL_LAST) {
- snd_printd(KERN_INFO "hda_codec: Unknown model for ALC260\n");
- board_config = ALC260_BASIC;
- }
+ { }
+};
- switch (board_config) {
- case ALC260_HP:
- spec->mixers[spec->num_mixers] = alc260_hp_mixer;
- spec->num_mixers++;
- break;
- case ALC260_FUJITSU_S702x:
- spec->mixers[spec->num_mixers] = alc260_fujitsu_mixer;
- spec->num_mixers++;
- break;
- default:
- spec->mixers[spec->num_mixers] = alc260_base_mixer;
- spec->num_mixers++;
- break;
- }
-
- if (board_config != ALC260_FUJITSU_S702x) {
- spec->init_verbs[0] = alc260_init_verbs;
- spec->num_init_verbs = 1;
- } else {
- spec->init_verbs[0] = alc260_fujitsu_init_verbs;
- spec->num_init_verbs = 1;
- }
+/* Initialisation sequence for ALC260 as configured in Acer TravelMate and
+ * similar laptops (adapted from Fujitsu init verbs).
+ */
+static struct hda_verb alc260_acer_init_verbs[] = {
+ /* On TravelMate laptops, GPIO 0 enables the internal speaker and
+ * the headphone jack. Turn this on and rely on the standard mute
+ * methods whenever the user wants to turn these outputs off.
+ */
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x01},
+ /* Internal speaker/Headphone jack is connected to Line-out pin */
+ {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ /* Internal microphone/Mic jack is connected to Mic1 pin */
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
+ /* Line In jack is connected to Line1 pin */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ /* Ensure all other unused pins are disabled and muted. */
+ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ /* Disable digital (SPDIF) pins */
+ {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
+ {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
- spec->channel_mode = alc260_modes;
- spec->num_channel_mode = ARRAY_SIZE(alc260_modes);
+ /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
+ * bus when acting as outputs.
+ */
+ {0x0b, AC_VERB_SET_CONNECT_SEL, 0},
+ {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
- spec->stream_name_analog = "ALC260 Analog";
- spec->stream_analog_playback = &alc260_pcm_analog_playback;
- spec->stream_analog_capture = &alc260_pcm_analog_capture;
+ /* Start with output sum widgets muted and their output gains at min */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- spec->multiout.max_channels = spec->channel_mode[0].channels;
- spec->multiout.num_dacs = ARRAY_SIZE(alc260_dac_nids);
- spec->multiout.dac_nids = alc260_dac_nids;
+ /* Unmute Line-out pin widget amp left and right (no equiv mixer ctrl) */
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Unmute Mic1 and Line1 pin widget input buffers since they start as
+ * inputs. If the pin mode is changed by the user the pin mode control
+ * will take care of enabling the pin's input/output buffers as needed.
+ * Therefore there's no need to enable the input buffer at this
+ * stage.
+ */
+ {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- if (board_config != ALC260_FUJITSU_S702x) {
- spec->input_mux = &alc260_capture_source;
- } else {
- spec->input_mux = &alc260_fujitsu_capture_source;
- }
- switch (board_config) {
- case ALC260_HP:
- spec->num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids);
- spec->adc_nids = alc260_hp_adc_nids;
- break;
- default:
- spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids);
- spec->adc_nids = alc260_adc_nids;
- break;
- }
+ /* Mute capture amp left and right */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ /* Set ADC connection select to match default mixer setting - mic
+ * (on mic1 pin)
+ */
+ {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
- codec->patch_ops = alc_patch_ops;
+ /* Do similar with the second ADC: mute capture input amp and
+ * set ADC connection to line (on line1 pin)
+ */
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x05, AC_VERB_SET_CONNECT_SEL, 0x02},
- return 0;
-}
+ /* Mute all inputs to mixer widget (even unconnected ones) */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
+ { }
+};
-/*
- * ALC882 support
+/* Test configuration for debugging, modelled after the ALC880 test
+ * configuration.
+ */
+#ifdef CONFIG_SND_DEBUG
+static hda_nid_t alc260_test_dac_nids[1] = {
+ 0x02,
+};
+static hda_nid_t alc260_test_adc_nids[2] = {
+ 0x04, 0x05,
+};
+/* This is a bit messy since the two input muxes in the ALC260 have slight
+ * variations in their signal assignments. The ideal way to deal with this
+ * is to extend alc_spec.input_mux to allow a different input MUX for each
+ * ADC. For the purposes of the test model it's sufficient to just list
+ * both options for affected signal indices. The separate input mux
+ * functionality only needs to be considered if a model comes along which
+ * actually uses signals 0x5, 0x6 and 0x7 for something which makes sense to
+ * record.
+ */
+static struct hda_input_mux alc260_test_capture_source = {
+ .num_items = 8,
+ .items = {
+ { "MIC1 pin", 0x0 },
+ { "MIC2 pin", 0x1 },
+ { "LINE1 pin", 0x2 },
+ { "LINE2 pin", 0x3 },
+ { "CD pin", 0x4 },
+ { "LINE-OUT pin (cap1), Mixer (cap2)", 0x5 },
+ { "HP-OUT pin (cap1), LINE-OUT pin (cap2)", 0x6 },
+ { "HP-OUT pin (cap2 only)", 0x7 },
+ },
+};
+static snd_kcontrol_new_t alc260_test_mixer[] = {
+ /* Output driver widgets */
+ HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("LOUT2 Playback Switch", 0x09, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("LOUT1 Playback Switch", 0x08, 2, HDA_INPUT),
+
+ /* Modes for retasking pin widgets */
+ ALC_PIN_MODE("HP-OUT pin mode", 0x10, ALC_PIN_DIR_INOUT),
+ ALC_PIN_MODE("LINE-OUT pin mode", 0x0f, ALC_PIN_DIR_INOUT),
+ ALC_PIN_MODE("LINE2 pin mode", 0x15, ALC_PIN_DIR_INOUT),
+ ALC_PIN_MODE("LINE1 pin mode", 0x14, ALC_PIN_DIR_INOUT),
+ ALC_PIN_MODE("MIC2 pin mode", 0x13, ALC_PIN_DIR_INOUT),
+ ALC_PIN_MODE("MIC1 pin mode", 0x12, ALC_PIN_DIR_INOUT),
+
+ /* Loopback mixer controls */
+ HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x07, 0x00, HDA_INPUT),
+ HDA_CODEC_MUTE("MIC1 Playback Switch", 0x07, 0x00, HDA_INPUT),
+ HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x07, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("MIC2 Playback Switch", 0x07, 0x01, HDA_INPUT),
+ HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x07, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("LINE1 Playback Switch", 0x07, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("LINE2 Playback Volume", 0x07, 0x03, HDA_INPUT),
+ HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT),
+ HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT),
+ HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT),
+ HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT),
+ HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT),
+ HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x07, 0x7, HDA_INPUT),
+
+ /* Controls for GPIO pins, assuming they are configured as outputs */
+ ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01),
+ ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02),
+ ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04),
+ ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08),
+
+ /* Switches to allow the digital IO pins to be enabled. The datasheet
+ * is ambigious as to which NID is which; testing on laptops which
+ * make this output available should provide clarification.
+ */
+ ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x03, 0x01),
+ ALC_SPDIF_CTRL_SWITCH("SPDIF Capture Switch", 0x06, 0x01),
+
+ { } /* end */
+};
+static struct hda_verb alc260_test_init_verbs[] = {
+ /* Enable all GPIOs as outputs with an initial value of 0 */
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x00},
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x0f},
+
+ /* Enable retasking pins as output, initially without power amp */
+ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+
+ /* Disable digital (SPDIF) pins initially, but users can enable
+ * them via a mixer switch. In the case of SPDIF-out, this initverb
+ * payload also sets the generation to 0, output to be in "consumer"
+ * PCM format, copyright asserted, no pre-emphasis and no validity
+ * control.
+ */
+ {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
+ {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
+
+ /* Ensure mic1, mic2, line1 and line2 pin widgets take input from the
+ * OUT1 sum bus when acting as an output.
+ */
+ {0x0b, AC_VERB_SET_CONNECT_SEL, 0},
+ {0x0c, AC_VERB_SET_CONNECT_SEL, 0},
+ {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
+ {0x0e, AC_VERB_SET_CONNECT_SEL, 0},
+
+ /* Start with output sum widgets muted and their output gains at min */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+
+ /* Unmute retasking pin widget output buffers since the default
+ * state appears to be output. As the pin mode is changed by the
+ * user the pin mode control will take care of enabling the pin's
+ * input/output buffers as needed.
+ */
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Also unmute the mono-out pin widget */
+ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* Mute capture amp left and right */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ /* Set ADC connection select to match default mixer setting (mic1
+ * pin)
+ */
+ {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ /* Do the same for the second ADC: mute capture input amp and
+ * set ADC connection to mic1 pin
+ */
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ /* Mute all inputs to mixer widget (even unconnected ones) */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
+
+ { }
+};
+#endif
+
+static struct hda_pcm_stream alc260_pcm_analog_playback = {
+ .substreams = 1,
+ .channels_min = 2,
+ .channels_max = 2,
+};
+
+static struct hda_pcm_stream alc260_pcm_analog_capture = {
+ .substreams = 1,
+ .channels_min = 2,
+ .channels_max = 2,
+};
+
+#define alc260_pcm_digital_playback alc880_pcm_digital_playback
+#define alc260_pcm_digital_capture alc880_pcm_digital_capture
+
+/*
+ * for BIOS auto-configuration
+ */
+
+static int alc260_add_playback_controls(struct alc_spec *spec, hda_nid_t nid,
+ const char *pfx)
+{
+ hda_nid_t nid_vol;
+ unsigned long vol_val, sw_val;
+ char name[32];
+ int err;
+
+ if (nid >= 0x0f && nid < 0x11) {
+ nid_vol = nid - 0x7;
+ vol_val = HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0, HDA_OUTPUT);
+ sw_val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
+ } else if (nid == 0x11) {
+ nid_vol = nid - 0x7;
+ vol_val = HDA_COMPOSE_AMP_VAL(nid_vol, 2, 0, HDA_OUTPUT);
+ sw_val = HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT);
+ } else if (nid >= 0x12 && nid <= 0x15) {
+ nid_vol = 0x08;
+ vol_val = HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0, HDA_OUTPUT);
+ sw_val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
+ } else
+ return 0; /* N/A */
+
+ snprintf(name, sizeof(name), "%s Playback Volume", pfx);
+ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name, vol_val)) < 0)
+ return err;
+ snprintf(name, sizeof(name), "%s Playback Switch", pfx);
+ if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name, sw_val)) < 0)
+ return err;
+ return 1;
+}
+
+/* add playback controls from the parsed DAC table */
+static int alc260_auto_create_multi_out_ctls(struct alc_spec *spec,
+ const struct auto_pin_cfg *cfg)
+{
+ hda_nid_t nid;
+ int err;
+
+ spec->multiout.num_dacs = 1;
+ spec->multiout.dac_nids = spec->private_dac_nids;
+ spec->multiout.dac_nids[0] = 0x02;
+
+ nid = cfg->line_out_pins[0];
+ if (nid) {
+ err = alc260_add_playback_controls(spec, nid, "Front");
+ if (err < 0)
+ return err;
+ }
+
+ nid = cfg->speaker_pin;
+ if (nid) {
+ err = alc260_add_playback_controls(spec, nid, "Speaker");
+ if (err < 0)
+ return err;
+ }
+
+ nid = cfg->hp_pin;
+ if (nid) {
+ err = alc260_add_playback_controls(spec, nid, "Headphone");
+ if (err < 0)
+ return err;
+ }
+ return 0;
+}
+
+/* create playback/capture controls for input pins */
+static int alc260_auto_create_analog_input_ctls(struct alc_spec *spec,
+ const struct auto_pin_cfg *cfg)
+{
+ struct hda_input_mux *imux = &spec->private_imux;
+ int i, err, idx;
+
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ if (cfg->input_pins[i] >= 0x12) {
+ idx = cfg->input_pins[i] - 0x12;
+ err = new_analog_input(spec, cfg->input_pins[i],
+ auto_pin_cfg_labels[i], idx, 0x07);
+ if (err < 0)
+ return err;
+ imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
+ imux->items[imux->num_items].index = idx;
+ imux->num_items++;
+ }
+ if ((cfg->input_pins[i] >= 0x0f) && (cfg->input_pins[i] <= 0x10)){
+ idx = cfg->input_pins[i] - 0x09;
+ err = new_analog_input(spec, cfg->input_pins[i],
+ auto_pin_cfg_labels[i], idx, 0x07);
+ if (err < 0)
+ return err;
+ imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
+ imux->items[imux->num_items].index = idx;
+ imux->num_items++;
+ }
+ }
+ return 0;
+}
+
+static void alc260_auto_set_output_and_unmute(struct hda_codec *codec,
+ hda_nid_t nid, int pin_type,
+ int sel_idx)
+{
+ /* set as output */
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
+ /* need the manual connection? */
+ if (nid >= 0x12) {
+ int idx = nid - 0x12;
+ snd_hda_codec_write(codec, idx + 0x0b, 0,
+ AC_VERB_SET_CONNECT_SEL, sel_idx);
+
+ }
+}
+
+static void alc260_auto_init_multi_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t nid;
+
+ nid = spec->autocfg.line_out_pins[0];
+ if (nid)
+ alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0);
+
+ nid = spec->autocfg.speaker_pin;
+ if (nid)
+ alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0);
+
+ nid = spec->autocfg.hp_pin;
+ if (nid)
+ alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0);
+}
+
+#define ALC260_PIN_CD_NID 0x16
+static void alc260_auto_init_analog_input(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int i;
+
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ hda_nid_t nid = spec->autocfg.input_pins[i];
+ if (nid >= 0x12) {
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
+ if (nid != ALC260_PIN_CD_NID)
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_MUTE);
+ }
+ }
+}
+
+/*
+ * generic initialization of ADC, input mixers and output mixers
+ */
+static struct hda_verb alc260_volume_init_verbs[] = {
+ /*
+ * Unmute ADC0-1 and set the default input to mic-in
+ */
+ {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
+ * mixer widget
+ * Note: PASD motherboards uses the Line In 2 as the input for front panel
+ * mic (mic 2)
+ */
+ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+
+ /*
+ * Set up output mixers (0x08 - 0x0a)
+ */
+ /* set vol=0 to output mixers */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ /* set up input amps for analog loopback */
+ /* Amp Indices: DAC = 0, mixer = 1 */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ { }
+};
+
+static int alc260_parse_auto_config(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ unsigned int wcap;
+ int err;
+ static hda_nid_t alc260_ignore[] = { 0x17, 0 };
+
+ if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
+ alc260_ignore)) < 0)
+ return err;
+ if ((err = alc260_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0)
+ return err;
+ if (! spec->kctl_alloc)
+ return 0; /* can't find valid BIOS pin config */
+ if ((err = alc260_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
+ return err;
+
+ spec->multiout.max_channels = 2;
+
+ if (spec->autocfg.dig_out_pin)
+ spec->multiout.dig_out_nid = ALC260_DIGOUT_NID;
+ if (spec->kctl_alloc)
+ spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+
+ spec->init_verbs[spec->num_init_verbs++] = alc260_volume_init_verbs;
+
+ spec->input_mux = &spec->private_imux;
+
+ /* check whether NID 0x04 is valid */
+ wcap = get_wcaps(codec, 0x04);
+ wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
+ if (wcap != AC_WID_AUD_IN) {
+ spec->adc_nids = alc260_adc_nids_alt;
+ spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt);
+ spec->mixers[spec->num_mixers] = alc260_capture_alt_mixer;
+ } else {
+ spec->adc_nids = alc260_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids);
+ spec->mixers[spec->num_mixers] = alc260_capture_mixer;
+ }
+ spec->num_mixers++;
+
+ return 1;
+}
+
+/* additional initialization for auto-configuration model */
+static void alc260_auto_init(struct hda_codec *codec)
+{
+ alc260_auto_init_multi_out(codec);
+ alc260_auto_init_analog_input(codec);
+}
+
+/*
+ * ALC260 configurations
+ */
+static struct hda_board_config alc260_cfg_tbl[] = {
+ { .modelname = "basic", .config = ALC260_BASIC },
+ { .pci_subvendor = 0x104d, .pci_subdevice = 0x81bb,
+ .config = ALC260_BASIC }, /* Sony VAIO */
+ { .pci_subvendor = 0x152d, .pci_subdevice = 0x0729,
+ .config = ALC260_BASIC }, /* CTL Travel Master U553W */
+ { .modelname = "hp", .config = ALC260_HP },
+ { .pci_subvendor = 0x103c, .pci_subdevice = 0x3010, .config = ALC260_HP },
+ { .pci_subvendor = 0x103c, .pci_subdevice = 0x3011, .config = ALC260_HP },
+ { .pci_subvendor = 0x103c, .pci_subdevice = 0x3012, .config = ALC260_HP },
+ { .pci_subvendor = 0x103c, .pci_subdevice = 0x3013, .config = ALC260_HP_3013 },
+ { .pci_subvendor = 0x103c, .pci_subdevice = 0x3014, .config = ALC260_HP },
+ { .pci_subvendor = 0x103c, .pci_subdevice = 0x3015, .config = ALC260_HP },
+ { .pci_subvendor = 0x103c, .pci_subdevice = 0x3016, .config = ALC260_HP },
+ { .modelname = "fujitsu", .config = ALC260_FUJITSU_S702X },
+ { .pci_subvendor = 0x10cf, .pci_subdevice = 0x1326, .config = ALC260_FUJITSU_S702X },
+ { .modelname = "acer", .config = ALC260_ACER },
+ { .pci_subvendor = 0x1025, .pci_subdevice = 0x008f, .config = ALC260_ACER },
+#ifdef CONFIG_SND_DEBUG
+ { .modelname = "test", .config = ALC260_TEST },
+#endif
+ { .modelname = "auto", .config = ALC260_AUTO },
+ {}
+};
+
+static struct alc_config_preset alc260_presets[] = {
+ [ALC260_BASIC] = {
+ .mixers = { alc260_base_output_mixer,
+ alc260_input_mixer,
+ alc260_pc_beep_mixer,
+ alc260_capture_mixer },
+ .init_verbs = { alc260_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+ .dac_nids = alc260_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
+ .adc_nids = alc260_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .input_mux = &alc260_capture_source,
+ },
+ [ALC260_HP] = {
+ .mixers = { alc260_base_output_mixer,
+ alc260_input_mixer,
+ alc260_capture_alt_mixer },
+ .init_verbs = { alc260_hp_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+ .dac_nids = alc260_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids),
+ .adc_nids = alc260_hp_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .input_mux = &alc260_capture_source,
+ },
+ [ALC260_HP_3013] = {
+ .mixers = { alc260_hp_3013_mixer,
+ alc260_input_mixer,
+ alc260_capture_alt_mixer },
+ .init_verbs = { alc260_hp_3013_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+ .dac_nids = alc260_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids),
+ .adc_nids = alc260_hp_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .input_mux = &alc260_capture_source,
+ },
+ [ALC260_FUJITSU_S702X] = {
+ .mixers = { alc260_fujitsu_mixer,
+ alc260_capture_mixer },
+ .init_verbs = { alc260_fujitsu_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+ .dac_nids = alc260_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
+ .adc_nids = alc260_dual_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .input_mux = &alc260_fujitsu_capture_source,
+ },
+ [ALC260_ACER] = {
+ .mixers = { alc260_acer_mixer,
+ alc260_capture_mixer },
+ .init_verbs = { alc260_acer_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+ .dac_nids = alc260_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
+ .adc_nids = alc260_dual_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .input_mux = &alc260_acer_capture_source,
+ },
+#ifdef CONFIG_SND_DEBUG
+ [ALC260_TEST] = {
+ .mixers = { alc260_test_mixer,
+ alc260_capture_mixer },
+ .init_verbs = { alc260_test_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_test_dac_nids),
+ .dac_nids = alc260_test_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_test_adc_nids),
+ .adc_nids = alc260_test_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .input_mux = &alc260_test_capture_source,
+ },
+#endif
+};
+
+static int patch_alc260(struct hda_codec *codec)
+{
+ struct alc_spec *spec;
+ int err, board_config;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (spec == NULL)
+ return -ENOMEM;
+
+ codec->spec = spec;
+
+ board_config = snd_hda_check_board_config(codec, alc260_cfg_tbl);
+ if (board_config < 0 || board_config >= ALC260_MODEL_LAST) {
+ snd_printd(KERN_INFO "hda_codec: Unknown model for ALC260\n");
+ board_config = ALC260_AUTO;
+ }
+
+ if (board_config == ALC260_AUTO) {
+ /* automatic parse from the BIOS config */
+ err = alc260_parse_auto_config(codec);
+ if (err < 0) {
+ alc_free(codec);
+ return err;
+ } else if (! err) {
+ printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using base mode...\n");
+ board_config = ALC260_BASIC;
+ }
+ }
+
+ if (board_config != ALC260_AUTO)
+ setup_preset(spec, &alc260_presets[board_config]);
+
+ spec->stream_name_analog = "ALC260 Analog";
+ spec->stream_analog_playback = &alc260_pcm_analog_playback;
+ spec->stream_analog_capture = &alc260_pcm_analog_capture;
+
+ spec->stream_name_digital = "ALC260 Digital";
+ spec->stream_digital_playback = &alc260_pcm_digital_playback;
+ spec->stream_digital_capture = &alc260_pcm_digital_capture;
+
+ codec->patch_ops = alc_patch_ops;
+ if (board_config == ALC260_AUTO)
+ spec->init_hook = alc260_auto_init;
+
+ return 0;
+}
+
+
+/*
+ * ALC882 support
*
* ALC882 is almost identical with ALC880 but has cleaner and more flexible
* configuration. Each pin widget can choose any input DACs and a mixer.
@@ -2505,224 +3805,1737 @@ static int patch_alc260(struct hda_codec
* In addition, an independent DAC for the multi-playback (not used in this
* driver yet).
*/
+#define ALC882_DIGOUT_NID 0x06
+#define ALC882_DIGIN_NID 0x0a
+
+static struct hda_channel_mode alc882_ch_modes[1] = {
+ { 8, NULL }
+};
+
+static hda_nid_t alc882_dac_nids[4] = {
+ /* front, rear, clfe, rear_surr */
+ 0x02, 0x03, 0x04, 0x05
+};
+
+/* identical with ALC880 */
+#define alc882_adc_nids alc880_adc_nids
+#define alc882_adc_nids_alt alc880_adc_nids_alt
+
+/* input MUX */
+/* FIXME: should be a matrix-type input source selection */
+
+static struct hda_input_mux alc882_capture_source = {
+ .num_items = 4,
+ .items = {
+ { "Mic", 0x0 },
+ { "Front Mic", 0x1 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ },
+};
+
+#define alc882_mux_enum_info alc_mux_enum_info
+#define alc882_mux_enum_get alc_mux_enum_get
+
+static int alc882_mux_enum_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct alc_spec *spec = codec->spec;
+ const struct hda_input_mux *imux = spec->input_mux;
+ unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+ static hda_nid_t capture_mixers[3] = { 0x24, 0x23, 0x22 };
+ hda_nid_t nid = capture_mixers[adc_idx];
+ unsigned int *cur_val = &spec->cur_mux[adc_idx];
+ unsigned int i, idx;
+
+ idx = ucontrol->value.enumerated.item[0];
+ if (idx >= imux->num_items)
+ idx = imux->num_items - 1;
+ if (*cur_val == idx && ! codec->in_resume)
+ return 0;
+ for (i = 0; i < imux->num_items; i++) {
+ unsigned int v = (i == idx) ? 0x7000 : 0x7080;
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ v | (imux->items[i].index << 8));
+ }
+ *cur_val = idx;
+ return 1;
+}
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc882_sixstack_ch6_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
+ { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { } /* end */
+};
+
+/*
+ * 8ch mode
+ */
+static struct hda_verb alc882_sixstack_ch8_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { } /* end */
+};
+
+static struct hda_channel_mode alc882_sixstack_modes[2] = {
+ { 6, alc882_sixstack_ch6_init },
+ { 8, alc882_sixstack_ch8_init },
+};
+
+/* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
+ * Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
+ */
+static snd_kcontrol_new_t alc882_base_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
+ HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 3,
+ .info = alc882_mux_enum_info,
+ .get = alc882_mux_enum_get,
+ .put = alc882_mux_enum_put,
+ },
+ { } /* end */
+};
+
+static snd_kcontrol_new_t alc882_chmode_mixer[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Channel Mode",
+ .info = alc_ch_mode_info,
+ .get = alc_ch_mode_get,
+ .put = alc_ch_mode_put,
+ },
+ { } /* end */
+};
+
+static struct hda_verb alc882_init_verbs[] = {
+ /* Front mixer: unmute input/output amp left and right (volume = 0) */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* Rear mixer */
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* CLFE mixer */
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* Side mixer */
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+
+ /* Front Pin: output 0 (0x0c) */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* Rear Pin: output 1 (0x0d) */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
+ /* CLFE Pin: output 2 (0x0e) */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
+ /* Side Pin: output 3 (0x0f) */
+ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
+ /* Mic (rear) pin: input vref at 80% */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Front Mic pin: input vref at 80% */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line In pin: input */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line-2 In: Headphone output (output 0 - 0x0c) */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* CD pin widget for input */
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
+ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ /* Input mixer2 */
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ /* Input mixer3 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ /* ADC1: mute amp left and right */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* ADC2: mute amp left and right */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* ADC3: mute amp left and right */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ { }
+};
+
+/*
+ * generic initialization of ADC, input mixers and output mixers
+ */
+static struct hda_verb alc882_auto_init_verbs[] = {
+ /*
+ * Unmute ADC0-2 and set the default input to mic-in
+ */
+ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
+ * mixer widget
+ * Note: PASD motherboards uses the Line In 2 as the input for front panel
+ * mic (mic 2)
+ */
+ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+
+ /*
+ * Set up output mixers (0x0c - 0x0f)
+ */
+ /* set vol=0 to output mixers */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ /* set up input amps for analog loopback */
+ /* Amp Indices: DAC = 0, mixer = 1 */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
+ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+ /* Input mixer2 */
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+ /* Input mixer3 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+
+ { }
+};
+
+/* capture mixer elements */
+static snd_kcontrol_new_t alc882_capture_alt_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* The multiple "Capture Source" controls confuse alsamixer
+ * So call somewhat different..
+ * FIXME: the controls appear in the "playback" view!
+ */
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 2,
+ .info = alc882_mux_enum_info,
+ .get = alc882_mux_enum_get,
+ .put = alc882_mux_enum_put,
+ },
+ { } /* end */
+};
+
+static snd_kcontrol_new_t alc882_capture_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* The multiple "Capture Source" controls confuse alsamixer
+ * So call somewhat different..
+ * FIXME: the controls appear in the "playback" view!
+ */
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 3,
+ .info = alc882_mux_enum_info,
+ .get = alc882_mux_enum_get,
+ .put = alc882_mux_enum_put,
+ },
+ { } /* end */
+};
+
+/* pcm configuration: identiacal with ALC880 */
+#define alc882_pcm_analog_playback alc880_pcm_analog_playback
+#define alc882_pcm_analog_capture alc880_pcm_analog_capture
+#define alc882_pcm_digital_playback alc880_pcm_digital_playback
+#define alc882_pcm_digital_capture alc880_pcm_digital_capture
+
+/*
+ * configuration and preset
+ */
+static struct hda_board_config alc882_cfg_tbl[] = {
+ { .modelname = "3stack-dig", .config = ALC882_3ST_DIG },
+ { .modelname = "6stack-dig", .config = ALC882_6ST_DIG },
+ { .pci_subvendor = 0x1462, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* MSI */
+ { .pci_subvendor = 0x105b, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* Foxconn */
+ { .pci_subvendor = 0x1019, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* ECS */
+ { .modelname = "auto", .config = ALC882_AUTO },
+ {}
+};
+
+static struct alc_config_preset alc882_presets[] = {
+ [ALC882_3ST_DIG] = {
+ .mixers = { alc882_base_mixer },
+ .init_verbs = { alc882_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .num_adc_nids = ARRAY_SIZE(alc882_adc_nids),
+ .adc_nids = alc882_adc_nids,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
+ .channel_mode = alc882_ch_modes,
+ .input_mux = &alc882_capture_source,
+ },
+ [ALC882_6ST_DIG] = {
+ .mixers = { alc882_base_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc882_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .num_adc_nids = ARRAY_SIZE(alc882_adc_nids),
+ .adc_nids = alc882_adc_nids,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes),
+ .channel_mode = alc882_sixstack_modes,
+ .input_mux = &alc882_capture_source,
+ },
+};
+
+
+/*
+ * BIOS auto configuration
+ */
+static void alc882_auto_set_output_and_unmute(struct hda_codec *codec,
+ hda_nid_t nid, int pin_type,
+ int dac_idx)
+{
+ /* set as output */
+ struct alc_spec *spec = codec->spec;
+ int idx;
+
+ if (spec->multiout.dac_nids[dac_idx] == 0x25)
+ idx = 4;
+ else
+ idx = spec->multiout.dac_nids[dac_idx] - 2;
+
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, idx);
+
+}
+
+static void alc882_auto_init_multi_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int i;
+
+ for (i = 0; i <= HDA_SIDE; i++) {
+ hda_nid_t nid = spec->autocfg.line_out_pins[i];
+ if (nid)
+ alc882_auto_set_output_and_unmute(codec, nid, PIN_OUT, i);
+ }
+}
+
+static void alc882_auto_init_hp_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t pin;
+
+ pin = spec->autocfg.hp_pin;
+ if (pin) /* connect to front */
+ alc882_auto_set_output_and_unmute(codec, pin, PIN_HP, 0); /* use dac 0 */
+}
+
+#define alc882_is_input_pin(nid) alc880_is_input_pin(nid)
+#define ALC882_PIN_CD_NID ALC880_PIN_CD_NID
+
+static void alc882_auto_init_analog_input(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int i;
+
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ hda_nid_t nid = spec->autocfg.input_pins[i];
+ if (alc882_is_input_pin(nid)) {
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
+ if (nid != ALC882_PIN_CD_NID)
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_MUTE);
+ }
+ }
+}
+
+/* almost identical with ALC880 parser... */
+static int alc882_parse_auto_config(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int err = alc880_parse_auto_config(codec);
+
+ if (err < 0)
+ return err;
+ else if (err > 0)
+ /* hack - override the init verbs */
+ spec->init_verbs[0] = alc882_auto_init_verbs;
+ return err;
+}
+
+/* additional initialization for auto-configuration model */
+static void alc882_auto_init(struct hda_codec *codec)
+{
+ alc882_auto_init_multi_out(codec);
+ alc882_auto_init_hp_out(codec);
+ alc882_auto_init_analog_input(codec);
+}
+
+/*
+ * ALC882 Headphone poll in 3.5.1a or 3.5.2
+ */
+
+static int patch_alc882(struct hda_codec *codec)
+{
+ struct alc_spec *spec;
+ int err, board_config;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (spec == NULL)
+ return -ENOMEM;
+
+ codec->spec = spec;
+
+ board_config = snd_hda_check_board_config(codec, alc882_cfg_tbl);
+
+ if (board_config < 0 || board_config >= ALC882_MODEL_LAST) {
+ printk(KERN_INFO "hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...\n");
+ board_config = ALC882_AUTO;
+ }
+
+ if (board_config == ALC882_AUTO) {
+ /* automatic parse from the BIOS config */
+ err = alc882_parse_auto_config(codec);
+ if (err < 0) {
+ alc_free(codec);
+ return err;
+ } else if (! err) {
+ printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using base mode...\n");
+ board_config = ALC882_3ST_DIG;
+ }
+ }
+
+ if (board_config != ALC882_AUTO)
+ setup_preset(spec, &alc882_presets[board_config]);
+
+ spec->stream_name_analog = "ALC882 Analog";
+ spec->stream_analog_playback = &alc882_pcm_analog_playback;
+ spec->stream_analog_capture = &alc882_pcm_analog_capture;
+
+ spec->stream_name_digital = "ALC882 Digital";
+ spec->stream_digital_playback = &alc882_pcm_digital_playback;
+ spec->stream_digital_capture = &alc882_pcm_digital_capture;
+
+ if (! spec->adc_nids && spec->input_mux) {
+ /* check whether NID 0x07 is valid */
+ unsigned int wcap = get_wcaps(codec, 0x07);
+ wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
+ if (wcap != AC_WID_AUD_IN) {
+ spec->adc_nids = alc882_adc_nids_alt;
+ spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids_alt);
+ spec->mixers[spec->num_mixers] = alc882_capture_alt_mixer;
+ spec->num_mixers++;
+ } else {
+ spec->adc_nids = alc882_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids);
+ spec->mixers[spec->num_mixers] = alc882_capture_mixer;
+ spec->num_mixers++;
+ }
+ }
+
+ codec->patch_ops = alc_patch_ops;
+ if (board_config == ALC882_AUTO)
+ spec->init_hook = alc882_auto_init;
+
+ return 0;
+}
+
+/*
+ * ALC262 support
+ */
+
+#define ALC262_DIGOUT_NID ALC880_DIGOUT_NID
+#define ALC262_DIGIN_NID ALC880_DIGIN_NID
+
+#define alc262_dac_nids alc260_dac_nids
+#define alc262_adc_nids alc882_adc_nids
+#define alc262_adc_nids_alt alc882_adc_nids_alt
+
+#define alc262_modes alc260_modes
+#define alc262_capture_source alc882_capture_source
+
+static snd_kcontrol_new_t alc262_base_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
+ /* HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_MUTE("PC Beelp Playback Switch", 0x0b, 0x05, HDA_INPUT), */
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("Mono Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT),
+ { } /* end */
+};
+
+#define alc262_capture_mixer alc882_capture_mixer
+#define alc262_capture_alt_mixer alc882_capture_alt_mixer
+
+/*
+ * generic initialization of ADC, input mixers and output mixers
+ */
+static struct hda_verb alc262_init_verbs[] = {
+ /*
+ * Unmute ADC0-2 and set the default input to mic-in
+ */
+ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
+ * mixer widget
+ * Note: PASD motherboards uses the Line In 2 as the input for front panel
+ * mic (mic 2)
+ */
+ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+
+ /*
+ * Set up output mixers (0x0c - 0x0e)
+ */
+ /* set vol=0 to output mixers */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ /* set up input amps for analog loopback */
+ /* Amp Indices: DAC = 0, mixer = 1 */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
+ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+ /* Input mixer2 */
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+ /* Input mixer3 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+
+ { }
+};
+
+/*
+ * fujitsu model
+ * 0x14 = headphone/spdif-out, 0x15 = internal speaker
+ */
+
+#define ALC_HP_EVENT 0x37
+
+static struct hda_verb alc262_fujitsu_unsol_verbs[] = {
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {}
+};
+
+static struct hda_input_mux alc262_fujitsu_capture_source = {
+ .num_items = 2,
+ .items = {
+ { "Mic", 0x0 },
+ { "CD", 0x4 },
+ },
+};
+
+/* mute/unmute internal speaker according to the hp jack and mute state */
+static void alc262_fujitsu_automute(struct hda_codec *codec, int force)
+{
+ struct alc_spec *spec = codec->spec;
+ unsigned int mute;
+
+ if (force || ! spec->sense_updated) {
+ unsigned int present;
+ /* need to execute and sync at first */
+ snd_hda_codec_read(codec, 0x14, 0, AC_VERB_SET_PIN_SENSE, 0);
+ present = snd_hda_codec_read(codec, 0x14, 0,
+ AC_VERB_GET_PIN_SENSE, 0);
+ spec->jack_present = (present & 0x80000000) != 0;
+ spec->sense_updated = 1;
+ }
+ if (spec->jack_present) {
+ /* mute internal speaker */
+ snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0,
+ 0x80, 0x80);
+ snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0,
+ 0x80, 0x80);
+ } else {
+ /* unmute internal speaker if necessary */
+ mute = snd_hda_codec_amp_read(codec, 0x14, 0, HDA_OUTPUT, 0);
+ snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0,
+ 0x80, mute & 0x80);
+ mute = snd_hda_codec_amp_read(codec, 0x14, 1, HDA_OUTPUT, 0);
+ snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0,
+ 0x80, mute & 0x80);
+ }
+}
+
+/* unsolicited event for HP jack sensing */
+static void alc262_fujitsu_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ if ((res >> 26) != ALC_HP_EVENT)
+ return;
+ alc262_fujitsu_automute(codec, 1);
+}
+
+/* bind volumes of both NID 0x0c and 0x0d */
+static int alc262_fujitsu_master_vol_put(snd_kcontrol_t *kcontrol,
+ snd_ctl_elem_value_t *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ long *valp = ucontrol->value.integer.value;
+ int change;
+
+ change = snd_hda_codec_amp_update(codec, 0x0c, 0, HDA_OUTPUT, 0,
+ 0x7f, valp[0] & 0x7f);
+ change |= snd_hda_codec_amp_update(codec, 0x0c, 1, HDA_OUTPUT, 0,
+ 0x7f, valp[1] & 0x7f);
+ snd_hda_codec_amp_update(codec, 0x0d, 0, HDA_OUTPUT, 0,
+ 0x7f, valp[0] & 0x7f);
+ snd_hda_codec_amp_update(codec, 0x0d, 1, HDA_OUTPUT, 0,
+ 0x7f, valp[1] & 0x7f);
+ return change;
+}
+
+/* bind hp and internal speaker mute (with plug check) */
+static int alc262_fujitsu_master_sw_put(snd_kcontrol_t *kcontrol,
+ snd_ctl_elem_value_t *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ long *valp = ucontrol->value.integer.value;
+ int change;
+
+ change = snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0,
+ 0x80, valp[0] ? 0 : 0x80);
+ change |= snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0,
+ 0x80, valp[1] ? 0 : 0x80);
+ if (change || codec->in_resume)
+ alc262_fujitsu_automute(codec, codec->in_resume);
+ return change;
+}
+
+static snd_kcontrol_new_t alc262_fujitsu_mixer[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Volume",
+ .info = snd_hda_mixer_amp_volume_info,
+ .get = snd_hda_mixer_amp_volume_get,
+ .put = alc262_fujitsu_master_vol_put,
+ .private_value = HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT),
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Switch",
+ .info = snd_hda_mixer_amp_switch_info,
+ .get = snd_hda_mixer_amp_switch_get,
+ .put = alc262_fujitsu_master_sw_put,
+ .private_value = HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
+ },
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ { } /* end */
+};
+
+/* add playback controls from the parsed DAC table */
+static int alc262_auto_create_multi_out_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
+{
+ hda_nid_t nid;
+ int err;
+
+ spec->multiout.num_dacs = 1; /* only use one dac */
+ spec->multiout.dac_nids = spec->private_dac_nids;
+ spec->multiout.dac_nids[0] = 2;
+
+ nid = cfg->line_out_pins[0];
+ if (nid) {
+ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Front Playback Volume",
+ HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT))) < 0)
+ return err;
+ if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Front Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+ return err;
+ }
+
+ nid = cfg->speaker_pin;
+ if (nid) {
+ if (nid == 0x16) {
+ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Speaker Playback Volume",
+ HDA_COMPOSE_AMP_VAL(0x0e, 2, 0, HDA_OUTPUT))) < 0)
+ return err;
+ if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Speaker Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
+ return err;
+ } else {
+ if (! cfg->line_out_pins[0])
+ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Speaker Playback Volume",
+ HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT))) < 0)
+ return err;
+ if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Speaker Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+ return err;
+ }
+ }
+ nid = cfg->hp_pin;
+ if (nid) {
+ /* spec->multiout.hp_nid = 2; */
+ if (nid == 0x16) {
+ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Headphone Playback Volume",
+ HDA_COMPOSE_AMP_VAL(0x0e, 2, 0, HDA_OUTPUT))) < 0)
+ return err;
+ if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
+ return err;
+ } else {
+ if (! cfg->line_out_pins[0])
+ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Headphone Playback Volume",
+ HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT))) < 0)
+ return err;
+ if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+ return err;
+ }
+ }
+ return 0;
+}
+
+/* identical with ALC880 */
+#define alc262_auto_create_analog_input_ctls alc880_auto_create_analog_input_ctls
+
+/*
+ * generic initialization of ADC, input mixers and output mixers
+ */
+static struct hda_verb alc262_volume_init_verbs[] = {
+ /*
+ * Unmute ADC0-2 and set the default input to mic-in
+ */
+ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
+ * mixer widget
+ * Note: PASD motherboards uses the Line In 2 as the input for front panel
+ * mic (mic 2)
+ */
+ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+
+ /*
+ * Set up output mixers (0x0c - 0x0f)
+ */
+ /* set vol=0 to output mixers */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+
+ /* set up input amps for analog loopback */
+ /* Amp Indices: DAC = 0, mixer = 1 */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
+ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+ /* Input mixer2 */
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+ /* Input mixer3 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+
+ { }
+};
+
+/* pcm configuration: identiacal with ALC880 */
+#define alc262_pcm_analog_playback alc880_pcm_analog_playback
+#define alc262_pcm_analog_capture alc880_pcm_analog_capture
+#define alc262_pcm_digital_playback alc880_pcm_digital_playback
+#define alc262_pcm_digital_capture alc880_pcm_digital_capture
+
+/*
+ * BIOS auto configuration
+ */
+static int alc262_parse_auto_config(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int err;
+ static hda_nid_t alc262_ignore[] = { 0x1d, 0 };
+
+ if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
+ alc262_ignore)) < 0)
+ return err;
+ if (! spec->autocfg.line_outs && ! spec->autocfg.speaker_pin &&
+ ! spec->autocfg.hp_pin)
+ return 0; /* can't find valid BIOS pin config */
+ if ((err = alc262_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
+ (err = alc262_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
+ return err;
+
+ spec->multiout.max_channels = spec->multiout.num_dacs * 2;
+
+ if (spec->autocfg.dig_out_pin)
+ spec->multiout.dig_out_nid = ALC262_DIGOUT_NID;
+ if (spec->autocfg.dig_in_pin)
+ spec->dig_in_nid = ALC262_DIGIN_NID;
+
+ if (spec->kctl_alloc)
+ spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+
+ spec->init_verbs[spec->num_init_verbs++] = alc262_volume_init_verbs;
+ spec->input_mux = &spec->private_imux;
+
+ return 1;
+}
+
+#define alc262_auto_init_multi_out alc882_auto_init_multi_out
+#define alc262_auto_init_hp_out alc882_auto_init_hp_out
+#define alc262_auto_init_analog_input alc882_auto_init_analog_input
+
+
+/* init callback for auto-configuration model -- overriding the default init */
+static void alc262_auto_init(struct hda_codec *codec)
+{
+ alc262_auto_init_multi_out(codec);
+ alc262_auto_init_hp_out(codec);
+ alc262_auto_init_analog_input(codec);
+}
+
+/*
+ * configuration and preset
+ */
+static struct hda_board_config alc262_cfg_tbl[] = {
+ { .modelname = "basic", .config = ALC262_BASIC },
+ { .modelname = "fujitsu", .config = ALC262_FUJITSU },
+ { .pci_subvendor = 0x10cf, .pci_subdevice = 0x1397, .config = ALC262_FUJITSU },
+ { .modelname = "auto", .config = ALC262_AUTO },
+ {}
+};
+
+static struct alc_config_preset alc262_presets[] = {
+ [ALC262_BASIC] = {
+ .mixers = { alc262_base_mixer },
+ .init_verbs = { alc262_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc262_dac_nids),
+ .dac_nids = alc262_dac_nids,
+ .hp_nid = 0x03,
+ .num_channel_mode = ARRAY_SIZE(alc262_modes),
+ .channel_mode = alc262_modes,
+ .input_mux = &alc262_capture_source,
+ },
+ [ALC262_FUJITSU] = {
+ .mixers = { alc262_fujitsu_mixer },
+ .init_verbs = { alc262_init_verbs, alc262_fujitsu_unsol_verbs },
+ .num_dacs = ARRAY_SIZE(alc262_dac_nids),
+ .dac_nids = alc262_dac_nids,
+ .hp_nid = 0x03,
+ .dig_out_nid = ALC262_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc262_modes),
+ .channel_mode = alc262_modes,
+ .input_mux = &alc262_fujitsu_capture_source,
+ .unsol_event = alc262_fujitsu_unsol_event,
+ },
+};
+
+static int patch_alc262(struct hda_codec *codec)
+{
+ struct alc_spec *spec;
+ int board_config;
+ int err;
+
+ spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
+ if (spec == NULL)
+ return -ENOMEM;
+
+ codec->spec = spec;
+#if 0
+ /* pshou 07/11/05 set a zero PCM sample to DAC when FIFO is under-run */
+ {
+ int tmp;
+ snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_COEF_INDEX, 7);
+ tmp = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_PROC_COEF, 0);
+ snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_COEF_INDEX, 7);
+ snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_PROC_COEF, tmp | 0x80);
+ }
+#endif
+
+ board_config = snd_hda_check_board_config(codec, alc262_cfg_tbl);
+ if (board_config < 0 || board_config >= ALC262_MODEL_LAST) {
+ printk(KERN_INFO "hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...\n");
+ board_config = ALC262_AUTO;
+ }
+
+ if (board_config == ALC262_AUTO) {
+ /* automatic parse from the BIOS config */
+ err = alc262_parse_auto_config(codec);
+ if (err < 0) {
+ alc_free(codec);
+ return err;
+ } else if (! err) {
+ printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using base mode...\n");
+ board_config = ALC262_BASIC;
+ }
+ }
+
+ if (board_config != ALC262_AUTO)
+ setup_preset(spec, &alc262_presets[board_config]);
+
+ spec->stream_name_analog = "ALC262 Analog";
+ spec->stream_analog_playback = &alc262_pcm_analog_playback;
+ spec->stream_analog_capture = &alc262_pcm_analog_capture;
+
+ spec->stream_name_digital = "ALC262 Digital";
+ spec->stream_digital_playback = &alc262_pcm_digital_playback;
+ spec->stream_digital_capture = &alc262_pcm_digital_capture;
+
+ if (! spec->adc_nids && spec->input_mux) {
+ /* check whether NID 0x07 is valid */
+ unsigned int wcap = get_wcaps(codec, 0x07);
+
+ wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
+ if (wcap != AC_WID_AUD_IN) {
+ spec->adc_nids = alc262_adc_nids_alt;
+ spec->num_adc_nids = ARRAY_SIZE(alc262_adc_nids_alt);
+ spec->mixers[spec->num_mixers] = alc262_capture_alt_mixer;
+ spec->num_mixers++;
+ } else {
+ spec->adc_nids = alc262_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc262_adc_nids);
+ spec->mixers[spec->num_mixers] = alc262_capture_mixer;
+ spec->num_mixers++;
+ }
+ }
+
+ codec->patch_ops = alc_patch_ops;
+ if (board_config == ALC262_AUTO)
+ spec->init_hook = alc262_auto_init;
+
+ return 0;
+}
+
+
+/*
+ * ALC861 channel source setting (2/6 channel selection for 3-stack)
+ */
+
+/*
+ * set the path ways for 2 channel output
+ * need to set the codec line out and mic 1 pin widgets to inputs
+ */
+static struct hda_verb alc861_threestack_ch2_init[] = {
+ /* set pin widget 1Ah (line in) for input */
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ /* set pin widget 18h (mic1/2) for input, for mic also enable the vref */
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c },
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, //mic
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8)) }, //line in
+ { } /* end */
+};
+/*
+ * 6ch mode
+ * need to set the codec line out and mic 1 pin widgets to outputs
+ */
+static struct hda_verb alc861_threestack_ch6_init[] = {
+ /* set pin widget 1Ah (line in) for output (Back Surround)*/
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ /* set pin widget 18h (mic1) for output (CLFE)*/
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+
+ { 0x0c, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00 },
+
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, //mic
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8)) }, //line in
+ { } /* end */
+};
+
+static struct hda_channel_mode alc861_threestack_modes[2] = {
+ { 2, alc861_threestack_ch2_init },
+ { 6, alc861_threestack_ch6_init },
+};
+
+/* patch-ALC861 */
+
+static snd_kcontrol_new_t alc861_base_mixer[] = {
+ /* output mixer control */
+ HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT),
+
+ /*Input mixer control */
+ /* HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT), */
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
+
+ /* Capture mixer control */
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Source",
+ .count = 1,
+ .info = alc_mux_enum_info,
+ .get = alc_mux_enum_get,
+ .put = alc_mux_enum_put,
+ },
+ { } /* end */
+};
+
+static snd_kcontrol_new_t alc861_3ST_mixer[] = {
+ /* output mixer control */
+ HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
+ /*HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT), */
+
+ /* Input mixer control */
+ /* HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT), */
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
+
+ /* Capture mixer control */
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Source",
+ .count = 1,
+ .info = alc_mux_enum_info,
+ .get = alc_mux_enum_get,
+ .put = alc_mux_enum_put,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Channel Mode",
+ .info = alc_ch_mode_info,
+ .get = alc_ch_mode_get,
+ .put = alc_ch_mode_put,
+ .private_value = ARRAY_SIZE(alc861_threestack_modes),
+ },
+ { } /* end */
+};
+
+/*
+ * generic initialization of ADC, input mixers and output mixers
+ */
+static struct hda_verb alc861_base_init_verbs[] = {
+ /*
+ * Unmute ADC0 and set the default input to mic-in
+ */
+ /* port-A for surround (rear panel) */
+ { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ { 0x0e, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ /* port-B for mic-in (rear panel) with vref */
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ /* port-C for line-in (rear panel) */
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ /* port-D for Front */
+ { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ { 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ /* port-E for HP out (front panel) */
+ { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
+ /* route front PCM to HP */
+ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ /* port-F for mic-in (front panel) with vref */
+ { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ /* port-G for CLFE (rear panel) */
+ { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ { 0x1f, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ /* port-H for side (rear panel) */
+ { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ { 0x20, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ /* CD-in */
+ { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ /* route front mic to ADC1*/
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ /* Unmute DAC0~3 & spdif out*/
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* Unmute Mixer 14 (mic) 1c (Line in)*/
+ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ /* Unmute Stereo Mixer 15 */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, //Output 0~12 step
+
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, // hp used DAC 3 (Front)
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+
+ { }
+};
+
+static struct hda_verb alc861_threestack_init_verbs[] = {
+ /*
+ * Unmute ADC0 and set the default input to mic-in
+ */
+ /* port-A for surround (rear panel) */
+ { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
+ /* port-B for mic-in (rear panel) with vref */
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ /* port-C for line-in (rear panel) */
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ /* port-D for Front */
+ { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ { 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ /* port-E for HP out (front panel) */
+ { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
+ /* route front PCM to HP */
+ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ /* port-F for mic-in (front panel) with vref */
+ { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ /* port-G for CLFE (rear panel) */
+ { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
+ /* port-H for side (rear panel) */
+ { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
+ /* CD-in */
+ { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ /* route front mic to ADC1*/
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ /* Unmute DAC0~3 & spdif out*/
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* Unmute Mixer 14 (mic) 1c (Line in)*/
+ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ /* Unmute Stereo Mixer 15 */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, //Output 0~12 step
+
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, // hp used DAC 3 (Front)
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ { }
+};
+/*
+ * generic initialization of ADC, input mixers and output mixers
+ */
+static struct hda_verb alc861_auto_init_verbs[] = {
+ /*
+ * Unmute ADC0 and set the default input to mic-in
+ */
+// {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ /* Unmute DAC0~3 & spdif out*/
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* Unmute Mixer 14 (mic) 1c (Line in)*/
+ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ /* Unmute Stereo Mixer 15 */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c},
+
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, // set Mic 1
+
+ { }
+};
+
+/* pcm configuration: identiacal with ALC880 */
+#define alc861_pcm_analog_playback alc880_pcm_analog_playback
+#define alc861_pcm_analog_capture alc880_pcm_analog_capture
+#define alc861_pcm_digital_playback alc880_pcm_digital_playback
+#define alc861_pcm_digital_capture alc880_pcm_digital_capture
+
+
+#define ALC861_DIGOUT_NID 0x07
+
+static struct hda_channel_mode alc861_8ch_modes[1] = {
+ { 8, NULL }
+};
+
+static hda_nid_t alc861_dac_nids[4] = {
+ /* front, surround, clfe, side */
+ 0x03, 0x06, 0x05, 0x04
+};
+
+static hda_nid_t alc861_adc_nids[1] = {
+ /* ADC0-2 */
+ 0x08,
+};
+
+static struct hda_input_mux alc861_capture_source = {
+ .num_items = 5,
+ .items = {
+ { "Mic", 0x0 },
+ { "Front Mic", 0x3 },
+ { "Line", 0x1 },
+ { "CD", 0x4 },
+ { "Mixer", 0x5 },
+ },
+};
+
+/* fill in the dac_nids table from the parsed pin configuration */
+static int alc861_auto_fill_dac_nids(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
+{
+ int i;
+ hda_nid_t nid;
+
+ spec->multiout.dac_nids = spec->private_dac_nids;
+ for (i = 0; i < cfg->line_outs; i++) {
+ nid = cfg->line_out_pins[i];
+ if (nid) {
+ if (i >= ARRAY_SIZE(alc861_dac_nids))
+ continue;
+ spec->multiout.dac_nids[i] = alc861_dac_nids[i];
+ }
+ }
+ spec->multiout.num_dacs = cfg->line_outs;
+ return 0;
+}
+
+/* add playback controls from the parsed DAC table */
+static int alc861_auto_create_multi_out_ctls(struct alc_spec *spec,
+ const struct auto_pin_cfg *cfg)
+{
+ char name[32];
+ static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" };
+ hda_nid_t nid;
+ int i, idx, err;
+
+ for (i = 0; i < cfg->line_outs; i++) {
+ nid = spec->multiout.dac_nids[i];
+ if (! nid)
+ continue;
+ if (nid == 0x05) {
+ /* Center/LFE */
+ if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "Center Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT))) < 0)
+ return err;
+ if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "LFE Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
+ return err;
+ } else {
+ for (idx = 0; idx < ARRAY_SIZE(alc861_dac_nids) - 1; idx++)
+ if (nid == alc861_dac_nids[idx])
+ break;
+ sprintf(name, "%s Playback Switch", chname[idx]);
+ if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+ return err;
+ }
+ }
+ return 0;
+}
+
+static int alc861_auto_create_hp_ctls(struct alc_spec *spec, hda_nid_t pin)
+{
+ int err;
+ hda_nid_t nid;
+
+ if (! pin)
+ return 0;
+
+ if ((pin >= 0x0b && pin <= 0x10) || pin == 0x1f || pin == 0x20) {
+ nid = 0x03;
+ if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+ return err;
+ spec->multiout.hp_nid = nid;
+ }
+ return 0;
+}
+
+/* create playback/capture controls for input pins */
+static int alc861_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
+{
+ struct hda_input_mux *imux = &spec->private_imux;
+ int i, err, idx, idx1;
+
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ switch(cfg->input_pins[i]) {
+ case 0x0c:
+ idx1 = 1;
+ idx = 2; // Line In
+ break;
+ case 0x0f:
+ idx1 = 2;
+ idx = 2; // Line In
+ break;
+ case 0x0d:
+ idx1 = 0;
+ idx = 1; // Mic In
+ break;
+ case 0x10:
+ idx1 = 3;
+ idx = 1; // Mic In
+ break;
+ case 0x11:
+ idx1 = 4;
+ idx = 0; // CD
+ break;
+ default:
+ continue;
+ }
+
+ err = new_analog_input(spec, cfg->input_pins[i],
+ auto_pin_cfg_labels[i], idx, 0x15);
+ if (err < 0)
+ return err;
+
+ imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
+ imux->items[imux->num_items].index = idx1;
+ imux->num_items++;
+ }
+ return 0;
+}
+
+static snd_kcontrol_new_t alc861_capture_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
-static struct alc_channel_mode alc882_ch_modes[1] = {
- { 8, NULL }
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* The multiple "Capture Source" controls confuse alsamixer
+ * So call somewhat different..
+ *FIXME: the controls appear in the "playback" view!
+ */
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 1,
+ .info = alc_mux_enum_info,
+ .get = alc_mux_enum_get,
+ .put = alc_mux_enum_put,
+ },
+ { } /* end */
};
-static hda_nid_t alc882_dac_nids[4] = {
- /* front, rear, clfe, rear_surr */
- 0x02, 0x03, 0x04, 0x05
-};
+static void alc861_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid,
+ int pin_type, int dac_idx)
+{
+ /* set as output */
-static hda_nid_t alc882_adc_nids[3] = {
- /* ADC0-2 */
- 0x07, 0x08, 0x09,
-};
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
+ snd_hda_codec_write(codec, dac_idx, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
-/* input MUX */
-/* FIXME: should be a matrix-type input source selection */
+}
-static struct hda_input_mux alc882_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x1 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- },
-};
+static void alc861_auto_init_multi_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int i;
-#define alc882_mux_enum_info alc_mux_enum_info
-#define alc882_mux_enum_get alc_mux_enum_get
+ for (i = 0; i < spec->autocfg.line_outs; i++) {
+ hda_nid_t nid = spec->autocfg.line_out_pins[i];
+ if (nid)
+ alc861_auto_set_output_and_unmute(codec, nid, PIN_OUT, spec->multiout.dac_nids[i]);
+ }
+}
-static int alc882_mux_enum_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
+static void alc861_auto_init_hp_out(struct hda_codec *codec)
{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
- const struct hda_input_mux *imux = spec->input_mux;
- unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
- static hda_nid_t capture_mixers[3] = { 0x24, 0x23, 0x22 };
- hda_nid_t nid = capture_mixers[adc_idx];
- unsigned int *cur_val = &spec->cur_mux[adc_idx];
- unsigned int i, idx;
+ hda_nid_t pin;
- idx = ucontrol->value.enumerated.item[0];
- if (idx >= imux->num_items)
- idx = imux->num_items - 1;
- if (*cur_val == idx && ! codec->in_resume)
- return 0;
- for (i = 0; i < imux->num_items; i++) {
- unsigned int v = (i == idx) ? 0x7000 : 0x7080;
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- v | (imux->items[i].index << 8));
+ pin = spec->autocfg.hp_pin;
+ if (pin) /* connect to front */
+ alc861_auto_set_output_and_unmute(codec, pin, PIN_HP, spec->multiout.dac_nids[0]);
+}
+
+static void alc861_auto_init_analog_input(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int i;
+
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ hda_nid_t nid = spec->autocfg.input_pins[i];
+ if ((nid>=0x0c) && (nid <=0x11)) {
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
+ }
}
- *cur_val = idx;
- return 1;
}
-/* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
- * Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
- */
-static snd_kcontrol_new_t alc882_base_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
- HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
- HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
- HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 3,
- .info = alc882_mux_enum_info,
- .get = alc882_mux_enum_get,
- .put = alc882_mux_enum_put,
- },
- { } /* end */
-};
+/* parse the BIOS configuration and set up the alc_spec */
+/* return 1 if successful, 0 if the proper config is not found, or a negative error code */
+static int alc861_parse_auto_config(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int err;
+ static hda_nid_t alc861_ignore[] = { 0x1d, 0 };
-static struct hda_verb alc882_init_verbs[] = {
- /* Front mixer: unmute input/output amp left and right (volume = 0) */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Rear mixer */
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* CLFE mixer */
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Side mixer */
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
+ alc861_ignore)) < 0)
+ return err;
+ if (! spec->autocfg.line_outs && ! spec->autocfg.speaker_pin &&
+ ! spec->autocfg.hp_pin)
+ return 0; /* can't find valid BIOS pin config */
- /* Front Pin: output 0 (0x0c) */
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* Rear Pin: output 1 (0x0d) */
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
- /* CLFE Pin: output 2 (0x0e) */
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
- /* Side Pin: output 3 (0x0f) */
- {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
- /* Mic (rear) pin: input vref at 80% */
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Front Mic pin: input vref at 80% */
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Line In pin: input */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Line-2 In: Headphone output (output 0 - 0x0c) */
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* CD pin widget for input */
- {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ if ((err = alc861_auto_fill_dac_nids(spec, &spec->autocfg)) < 0 ||
+ (err = alc861_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
+ (err = alc861_auto_create_hp_ctls(spec, spec->autocfg.hp_pin)) < 0 ||
+ (err = alc861_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
+ return err;
- /* FIXME: use matrix-type input source selection */
- /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
- /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* Input mixer2 */
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* Input mixer3 */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* ADC1: mute amp left and right */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* ADC2: mute amp left and right */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* ADC3: mute amp left and right */
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
+ spec->multiout.max_channels = spec->multiout.num_dacs * 2;
- { }
+ if (spec->autocfg.dig_out_pin)
+ spec->multiout.dig_out_nid = ALC861_DIGOUT_NID;
+
+ if (spec->kctl_alloc)
+ spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+
+ spec->init_verbs[spec->num_init_verbs++] = alc861_auto_init_verbs;
+
+ spec->input_mux = &spec->private_imux;
+
+ spec->adc_nids = alc861_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc861_adc_nids);
+ spec->mixers[spec->num_mixers] = alc861_capture_mixer;
+ spec->num_mixers++;
+
+ return 1;
+}
+
+/* additional initialization for auto-configuration model */
+static void alc861_auto_init(struct hda_codec *codec)
+{
+ alc861_auto_init_multi_out(codec);
+ alc861_auto_init_hp_out(codec);
+ alc861_auto_init_analog_input(codec);
+}
+
+
+/*
+ * configuration and preset
+ */
+static struct hda_board_config alc861_cfg_tbl[] = {
+ { .modelname = "3stack", .config = ALC861_3ST },
+ { .pci_subvendor = 0x8086, .pci_subdevice = 0xd600, .config = ALC861_3ST },
+ { .modelname = "3stack-dig", .config = ALC861_3ST_DIG },
+ { .modelname = "6stack-dig", .config = ALC861_6ST_DIG },
+ { .modelname = "auto", .config = ALC861_AUTO },
+ {}
};
-static int patch_alc882(struct hda_codec *codec)
+static struct alc_config_preset alc861_presets[] = {
+ [ALC861_3ST] = {
+ .mixers = { alc861_3ST_mixer },
+ .init_verbs = { alc861_threestack_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc861_dac_nids),
+ .dac_nids = alc861_dac_nids,
+ .num_channel_mode = ARRAY_SIZE(alc861_threestack_modes),
+ .channel_mode = alc861_threestack_modes,
+ .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
+ .adc_nids = alc861_adc_nids,
+ .input_mux = &alc861_capture_source,
+ },
+ [ALC861_3ST_DIG] = {
+ .mixers = { alc861_base_mixer },
+ .init_verbs = { alc861_threestack_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc861_dac_nids),
+ .dac_nids = alc861_dac_nids,
+ .dig_out_nid = ALC861_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc861_threestack_modes),
+ .channel_mode = alc861_threestack_modes,
+ .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
+ .adc_nids = alc861_adc_nids,
+ .input_mux = &alc861_capture_source,
+ },
+ [ALC861_6ST_DIG] = {
+ .mixers = { alc861_base_mixer },
+ .init_verbs = { alc861_base_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc861_dac_nids),
+ .dac_nids = alc861_dac_nids,
+ .dig_out_nid = ALC861_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc861_8ch_modes),
+ .channel_mode = alc861_8ch_modes,
+ .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
+ .adc_nids = alc861_adc_nids,
+ .input_mux = &alc861_capture_source,
+ },
+};
+
+
+static int patch_alc861(struct hda_codec *codec)
{
struct alc_spec *spec;
+ int board_config;
+ int err;
- spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
return -ENOMEM;
- codec->spec = spec;
-
- spec->mixers[spec->num_mixers] = alc882_base_mixer;
- spec->num_mixers++;
-
- spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
- spec->dig_in_nid = ALC880_DIGIN_NID;
- spec->init_verbs[0] = alc882_init_verbs;
- spec->num_init_verbs = 1;
-
- spec->channel_mode = alc882_ch_modes;
- spec->num_channel_mode = ARRAY_SIZE(alc882_ch_modes);
+ codec->spec = spec;
- spec->stream_name_analog = "ALC882 Analog";
- spec->stream_analog_playback = &alc880_pcm_analog_playback;
- spec->stream_analog_capture = &alc880_pcm_analog_capture;
+ board_config = snd_hda_check_board_config(codec, alc861_cfg_tbl);
+ if (board_config < 0 || board_config >= ALC861_MODEL_LAST) {
+ printk(KERN_INFO "hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...\n");
+ board_config = ALC861_AUTO;
+ }
- spec->stream_name_digital = "ALC882 Digital";
- spec->stream_digital_playback = &alc880_pcm_digital_playback;
- spec->stream_digital_capture = &alc880_pcm_digital_capture;
+ if (board_config == ALC861_AUTO) {
+ /* automatic parse from the BIOS config */
+ err = alc861_parse_auto_config(codec);
+ if (err < 0) {
+ alc_free(codec);
+ return err;
+ } else if (! err) {
+ printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using base mode...\n");
+ board_config = ALC861_3ST_DIG;
+ }
+ }
- spec->multiout.max_channels = spec->channel_mode[0].channels;
- spec->multiout.num_dacs = ARRAY_SIZE(alc882_dac_nids);
- spec->multiout.dac_nids = alc882_dac_nids;
+ if (board_config != ALC861_AUTO)
+ setup_preset(spec, &alc861_presets[board_config]);
- spec->input_mux = &alc882_capture_source;
- spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids);
- spec->adc_nids = alc882_adc_nids;
+ spec->stream_name_analog = "ALC861 Analog";
+ spec->stream_analog_playback = &alc861_pcm_analog_playback;
+ spec->stream_analog_capture = &alc861_pcm_analog_capture;
+
+ spec->stream_name_digital = "ALC861 Digital";
+ spec->stream_digital_playback = &alc861_pcm_digital_playback;
+ spec->stream_digital_capture = &alc861_pcm_digital_capture;
codec->patch_ops = alc_patch_ops;
-
+ if (board_config == ALC861_AUTO)
+ spec->init_hook = alc861_auto_init;
+
return 0;
}
@@ -2731,7 +5544,11 @@ static int patch_alc882(struct hda_codec
*/
struct hda_codec_preset snd_hda_preset_realtek[] = {
{ .id = 0x10ec0260, .name = "ALC260", .patch = patch_alc260 },
+ { .id = 0x10ec0262, .name = "ALC262", .patch = patch_alc262 },
{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
+ { .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc882 },
+ { .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 },
+ { .id = 0x10ec0861, .name = "ALC861", .patch = patch_alc861 },
{} /* terminator */
};
--
1.1.3
--
Daniel T. Chen crimsun at ubuntu.com
GPG key: www.sh.nu/~crimsun/pubkey.gpg.asc
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <https://lists.ubuntu.com/archives/kernel-team/attachments/20060310/3039e8cf/attachment.sig>
More information about the kernel-team
mailing list