[PATCH] [UBUNTU:sound/pci/hda/] Fix/add Realtek ALC8{61, 8[38]} codecs (hda_codec, patch_realtek)
crimsun at fungus.sh.nu
crimsun at fungus.sh.nu
Thu Jul 6 01:59:40 UTC 2006
Subject: [PATCH] [UBUNTU:sound/pci/hda/] Fix/add Realtek ALC8{61,8[38]} codecs (hda_codec,patch_realtek)
UpstreamStatus: Added in upstream alsa-kernel hg changeset 177cdaaa9ba8
http://hg-mirror.alsa-project.org/alsa-kernel?cmd=changeset;node=177cdaaa9ba83dfb55ea609cb564b7fdd5d80673;style=raw
This commit from Takashi Iwai by way of Realtek fixes ALC883 and adds
ALC888, ALC660 codec support. Now HP xw4400/6400/8400/9400 models are
supported using the model=hp-bpc parameter. There's a chunk of space/
indentation cleanup, too.
Signed-off-by: Daniel T Chen <crimsun at ubuntu.com>
---
sound/pci/hda/hda_codec.c | 4
sound/pci/hda/patch_realtek.c | 1039 +++++++++++++++++++++++++++++++++++++----
2 files changed, 949 insertions(+), 94 deletions(-)
53e8c99f9e4f459e6afdd2e1970e0d037365f838
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 24f19fc..ef8652c 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -396,7 +396,9 @@ static const struct hda_codec_preset *fi
u32 mask = preset->mask;
if (! mask)
mask = ~0;
- if (preset->id == (codec->vendor_id & mask))
+ if (preset->id == (codec->vendor_id & mask) &&
+ (! preset->rev ||
+ preset->rev == codec->revision_id))
return preset;
}
}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index f88f957..639747b 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -78,6 +78,7 @@ enum {
enum {
ALC262_BASIC,
ALC262_FUJITSU,
+ ALC262_HP_BPC,
ALC262_AUTO,
ALC262_MODEL_LAST /* last tag */
};
@@ -85,6 +86,7 @@ enum {
/* ALC861 models */
enum {
ALC861_3ST,
+ ALC660_3ST,
ALC861_3ST_DIG,
ALC861_6ST_DIG,
ALC861_AUTO,
@@ -99,6 +101,17 @@ enum {
ALC882_MODEL_LAST,
};
+/* ALC883 models */
+enum {
+ ALC883_3ST_2ch_DIG,
+ ALC883_3ST_6ch_DIG,
+ ALC883_3ST_6ch,
+ ALC883_6ST_DIG,
+ ALC888_DEMO_BOARD,
+ ALC883_AUTO,
+ ALC883_MODEL_LAST,
+};
+
/* for GPIO Poll */
#define GPIO_MASK 0x03
@@ -108,7 +121,8 @@ struct alc_spec {
unsigned int num_mixers;
const struct hda_verb *init_verbs[5]; /* initialization verbs
- * don't forget NULL termination!
+ * don't forget NULL
+ * termination!
*/
unsigned int num_init_verbs;
@@ -351,15 +365,19 @@ static int alc_pin_mode_put(snd_kcontrol
* this turns out to be necessary in the future.
*/
if (val <= 2) {
- snd_hda_codec_write(codec,nid,0,AC_VERB_SET_AMP_GAIN_MUTE,
- AMP_OUT_MUTE);
- snd_hda_codec_write(codec,nid,0,AC_VERB_SET_AMP_GAIN_MUTE,
- AMP_IN_UNMUTE(0));
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_MUTE);
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_IN_UNMUTE(0));
} else {
- snd_hda_codec_write(codec,nid,0,AC_VERB_SET_AMP_GAIN_MUTE,
- AMP_IN_MUTE(0));
- snd_hda_codec_write(codec,nid,0,AC_VERB_SET_AMP_GAIN_MUTE,
- AMP_OUT_UNMUTE);
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_IN_MUTE(0));
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_UNMUTE);
}
}
return change;
@@ -481,14 +499,17 @@ static int alc_spdif_ctrl_put(snd_kcontr
/*
* set up from the preset table
*/
-static void setup_preset(struct alc_spec *spec, const struct alc_config_preset *preset)
+static void setup_preset(struct alc_spec *spec,
+ const struct alc_config_preset *preset)
{
int i;
for (i = 0; i < ARRAY_SIZE(preset->mixers) && preset->mixers[i]; i++)
spec->mixers[spec->num_mixers++] = preset->mixers[i];
- for (i = 0; i < ARRAY_SIZE(preset->init_verbs) && preset->init_verbs[i]; i++)
- spec->init_verbs[spec->num_init_verbs++] = preset->init_verbs[i];
+ for (i = 0; i < ARRAY_SIZE(preset->init_verbs) && preset->init_verbs[i];
+ i++)
+ spec->init_verbs[spec->num_init_verbs++] =
+ preset->init_verbs[i];
spec->channel_mode = preset->channel_mode;
spec->num_channel_mode = preset->num_channel_mode;
@@ -517,8 +538,8 @@ static void setup_preset(struct alc_spec
* ALC880 3-stack model
*
* DAC: Front = 0x02 (0x0c), Surr = 0x05 (0x0f), CLFE = 0x04 (0x0e)
- * Pin assignment: Front = 0x14, Line-In/Surr = 0x1a, Mic/CLFE = 0x18, F-Mic = 0x1b
- * HP = 0x19
+ * Pin assignment: Front = 0x14, Line-In/Surr = 0x1a, Mic/CLFE = 0x18,
+ * F-Mic = 0x1b, HP = 0x19
*/
static hda_nid_t alc880_dac_nids[4] = {
@@ -662,7 +683,8 @@ static snd_kcontrol_new_t alc880_capture
/*
* ALC880 5-stack model
*
- * DAC: Front = 0x02 (0x0c), Surr = 0x05 (0x0f), CLFE = 0x04 (0x0d), Side = 0x02 (0xd)
+ * DAC: Front = 0x02 (0x0c), Surr = 0x05 (0x0f), CLFE = 0x04 (0x0d),
+ * Side = 0x02 (0xd)
* Pin assignment: Front = 0x14, Surr = 0x17, CLFE = 0x16
* Line-In/Side = 0x1a, Mic = 0x18, F-Mic = 0x1b, HP = 0x19
*/
@@ -700,7 +722,8 @@ static struct hda_channel_mode alc880_fi
/*
* ALC880 6-stack model
*
- * DAC: Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e), Side = 0x05 (0x0f)
+ * DAC: Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e),
+ * Side = 0x05 (0x0f)
* Pin assignment: Front = 0x14, Surr = 0x15, CLFE = 0x16, Side = 0x17,
* Mic = 0x18, F-Mic = 0x19, Line = 0x1a, HP = 0x1b
*/
@@ -811,7 +834,8 @@ static snd_kcontrol_new_t alc880_w810_ba
* Z710V model
*
* DAC: Front = 0x02 (0x0c), HP = 0x03 (0x0d)
- * Pin assignment: Front = 0x14, HP = 0x15, Mic = 0x18, Mic2 = 0x19(?), Line = 0x1a
+ * Pin assignment: Front = 0x14, HP = 0x15, Mic = 0x18, Mic2 = 0x19(?),
+ * Line = 0x1a
*/
static hda_nid_t alc880_z71v_dac_nids[1] = {
@@ -966,7 +990,8 @@ static int alc_build_controls(struct hda
}
if (spec->multiout.dig_out_nid) {
- err = snd_hda_create_spdif_out_ctls(codec, spec->multiout.dig_out_nid);
+ err = snd_hda_create_spdif_out_ctls(codec,
+ spec->multiout.dig_out_nid);
if (err < 0)
return err;
}
@@ -999,8 +1024,8 @@ static struct hda_verb alc880_volume_ini
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
* mixer widget
- * Note: PASD motherboards uses the Line In 2 as the input for front panel
- * mic (mic 2)
+ * Note: PASD motherboards uses the Line In 2 as the input for front
+ * panel mic (mic 2)
*/
/* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
@@ -1154,8 +1179,8 @@ static struct hda_verb alc880_pin_z71v_i
/*
* 6-stack pin configuration:
- * front = 0x14, surr = 0x15, clfe = 0x16, side = 0x17, mic = 0x18, f-mic = 0x19,
- * line = 0x1a, HP = 0x1b
+ * front = 0x14, surr = 0x15, clfe = 0x16, side = 0x17, mic = 0x18,
+ * f-mic = 0x19, line = 0x1a, HP = 0x1b
*/
static struct hda_verb alc880_pin_6stack_init_verbs[] = {
{0x13, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
@@ -1587,8 +1612,8 @@ static int alc880_playback_pcm_prepare(s
snd_pcm_substream_t *substream)
{
struct alc_spec *spec = codec->spec;
- return snd_hda_multi_out_analog_prepare(codec, &spec->multiout, stream_tag,
- format, substream);
+ return snd_hda_multi_out_analog_prepare(codec, &spec->multiout,
+ stream_tag, format, substream);
}
static int alc880_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
@@ -1640,7 +1665,8 @@ static int alc880_capture_pcm_cleanup(st
{
struct alc_spec *spec = codec->spec;
- snd_hda_codec_setup_stream(codec, spec->adc_nids[substream->number], 0, 0, 0);
+ snd_hda_codec_setup_stream(codec, spec->adc_nids[substream->number],
+ 0, 0, 0);
return 0;
}
@@ -2738,7 +2764,8 @@ static int patch_alc880(struct hda_codec
board_config = snd_hda_check_board_config(codec, alc880_cfg_tbl);
if (board_config < 0 || board_config >= ALC880_MODEL_LAST) {
- printk(KERN_INFO "hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...\n");
+ printk(KERN_INFO "hda_codec: Unknown model for ALC880, "
+ "trying auto-probe from BIOS...\n");
board_config = ALC880_AUTO;
}
@@ -2749,7 +2776,9 @@ static int patch_alc880(struct hda_codec
alc_free(codec);
return err;
} else if (! err) {
- printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using 3-stack mode...\n");
+ printk(KERN_INFO
+ "hda_codec: Cannot set up configuration "
+ "from BIOS. Using 3-stack mode...\n");
board_config = ALC880_3ST;
}
}
@@ -3946,7 +3975,8 @@ static int patch_alc260(struct hda_codec
board_config = snd_hda_check_board_config(codec, alc260_cfg_tbl);
if (board_config < 0 || board_config >= ALC260_MODEL_LAST) {
- snd_printd(KERN_INFO "hda_codec: Unknown model for ALC260\n");
+ snd_printd(KERN_INFO "hda_codec: Unknown model for ALC260, "
+ "trying auto-probe from BIOS...\n");
board_config = ALC260_AUTO;
}
@@ -3957,7 +3987,9 @@ static int patch_alc260(struct hda_codec
alc_free(codec);
return err;
} else if (! err) {
- printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using base mode...\n");
+ printk(KERN_INFO
+ "hda_codec: Cannot set up configuration "
+ "from BIOS. Using base mode...\n");
board_config = ALC260_BASIC;
}
}
@@ -4319,9 +4351,12 @@ static snd_kcontrol_new_t alc882_capture
static struct hda_board_config alc882_cfg_tbl[] = {
{ .modelname = "3stack-dig", .config = ALC882_3ST_DIG },
{ .modelname = "6stack-dig", .config = ALC882_6ST_DIG },
- { .pci_subvendor = 0x1462, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* MSI */
- { .pci_subvendor = 0x105b, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* Foxconn */
- { .pci_subvendor = 0x1019, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* ECS */
+ { .pci_subvendor = 0x1462, .pci_subdevice = 0x6668,
+ .config = ALC882_6ST_DIG }, /* MSI */
+ { .pci_subvendor = 0x105b, .pci_subdevice = 0x6668,
+ .config = ALC882_6ST_DIG }, /* Foxconn */
+ { .pci_subvendor = 0x1019, .pci_subdevice = 0x6668,
+ .config = ALC882_6ST_DIG }, /* ECS to Intel*/
{ .modelname = "auto", .config = ALC882_AUTO },
{}
};
@@ -4438,10 +4473,6 @@ static void alc882_auto_init(struct hda_
alc882_auto_init_analog_input(codec);
}
-/*
- * ALC882 Headphone poll in 3.5.1a or 3.5.2
- */
-
static int patch_alc882(struct hda_codec *codec)
{
struct alc_spec *spec;
@@ -4456,7 +4487,8 @@ static int patch_alc882(struct hda_codec
board_config = snd_hda_check_board_config(codec, alc882_cfg_tbl);
if (board_config < 0 || board_config >= ALC882_MODEL_LAST) {
- printk(KERN_INFO "hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...\n");
+ printk(KERN_INFO "hda_codec: Unknown model for ALC882, "
+ "trying auto-probe from BIOS...\n");
board_config = ALC882_AUTO;
}
@@ -4467,7 +4499,9 @@ static int patch_alc882(struct hda_codec
alc_free(codec);
return err;
} else if (! err) {
- printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using base mode...\n");
+ printk(KERN_INFO
+ "hda_codec: Cannot set up configuration "
+ "from BIOS. Using base mode...\n");
board_config = ALC882_3ST_DIG;
}
}
@@ -4508,70 +4542,738 @@ static int patch_alc882(struct hda_codec
}
/*
- * ALC262 support
+ * ALC883 support
+ *
+ * ALC883 is almost identical with ALC880 but has cleaner and more flexible
+ * configuration. Each pin widget can choose any input DACs and a mixer.
+ * Each ADC is connected from a mixer of all inputs. This makes possible
+ * 6-channel independent captures.
+ *
+ * In addition, an independent DAC for the multi-playback (not used in this
+ * driver yet).
*/
+#define ALC883_DIGOUT_NID 0x06
+#define ALC883_DIGIN_NID 0x0a
-#define ALC262_DIGOUT_NID ALC880_DIGOUT_NID
-#define ALC262_DIGIN_NID ALC880_DIGIN_NID
+static hda_nid_t alc883_dac_nids[4] = {
+ /* front, rear, clfe, rear_surr */
+ 0x02, 0x04, 0x03, 0x05
+};
-#define alc262_dac_nids alc260_dac_nids
-#define alc262_adc_nids alc882_adc_nids
-#define alc262_adc_nids_alt alc882_adc_nids_alt
+static hda_nid_t alc883_adc_nids[2] = {
+ /* ADC1-2 */
+ 0x08, 0x09,
+};
+/* input MUX */
+/* FIXME: should be a matrix-type input source selection */
-#define alc262_modes alc260_modes
-#define alc262_capture_source alc882_capture_source
+static struct hda_input_mux alc883_capture_source = {
+ .num_items = 4,
+ .items = {
+ { "Mic", 0x0 },
+ { "Front Mic", 0x1 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ },
+};
+#define alc883_mux_enum_info alc_mux_enum_info
+#define alc883_mux_enum_get alc_mux_enum_get
-static snd_kcontrol_new_t alc262_base_mixer[] = {
+static int alc883_mux_enum_put(snd_kcontrol_t *kcontrol,
+ snd_ctl_elem_value_t *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct alc_spec *spec = codec->spec;
+ const struct hda_input_mux *imux = spec->input_mux;
+ unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+ static hda_nid_t capture_mixers[3] = { 0x24, 0x23, 0x22 };
+ hda_nid_t nid = capture_mixers[adc_idx];
+ unsigned int *cur_val = &spec->cur_mux[adc_idx];
+ unsigned int i, idx;
+
+ idx = ucontrol->value.enumerated.item[0];
+ if (idx >= imux->num_items)
+ idx = imux->num_items - 1;
+ if (*cur_val == idx && ! codec->in_resume)
+ return 0;
+ for (i = 0; i < imux->num_items; i++) {
+ unsigned int v = (i == idx) ? 0x7000 : 0x7080;
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ v | (imux->items[i].index << 8));
+ }
+ *cur_val = idx;
+ return 1;
+}
+/*
+ * 2ch mode
+ */
+static struct hda_channel_mode alc883_3ST_2ch_modes[1] = {
+ { 2, NULL }
+};
+
+/*
+ * 2ch mode
+ */
+static struct hda_verb alc883_3ST_ch2_init[] = {
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { } /* end */
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc883_3ST_ch6_init[] = {
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+static struct hda_channel_mode alc883_3ST_6ch_modes[2] = {
+ { 2, alc883_3ST_ch2_init },
+ { 6, alc883_3ST_ch6_init },
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc883_sixstack_ch6_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
+ { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { } /* end */
+};
+
+/*
+ * 8ch mode
+ */
+static struct hda_verb alc883_sixstack_ch8_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { } /* end */
+};
+
+static struct hda_channel_mode alc883_sixstack_modes[2] = {
+ { 6, alc883_sixstack_ch6_init },
+ { 8, alc883_sixstack_ch8_init },
+};
+
+/* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
+ * Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
+ */
+
+static snd_kcontrol_new_t alc883_base_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
+ HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
- /* HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT),
- HDA_CODEC_MUTE("PC Beelp Playback Switch", 0x0b, 0x05, HDA_INPUT), */
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("Mono Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 2,
+ .info = alc883_mux_enum_info,
+ .get = alc883_mux_enum_get,
+ .put = alc883_mux_enum_put,
+ },
{ } /* end */
};
-#define alc262_capture_mixer alc882_capture_mixer
-#define alc262_capture_alt_mixer alc882_capture_alt_mixer
+static snd_kcontrol_new_t alc883_3ST_2ch_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 2,
+ .info = alc883_mux_enum_info,
+ .get = alc883_mux_enum_get,
+ .put = alc883_mux_enum_put,
+ },
+ { } /* end */
+};
-/*
- * generic initialization of ADC, input mixers and output mixers
- */
-static struct hda_verb alc262_init_verbs[] = {
- /*
- * Unmute ADC0-2 and set the default input to mic-in
- */
- {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+static snd_kcontrol_new_t alc883_3ST_6ch_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
+ HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 2,
+ .info = alc883_mux_enum_info,
+ .get = alc883_mux_enum_get,
+ .put = alc883_mux_enum_put,
+ },
+ { } /* end */
+};
+
+static snd_kcontrol_new_t alc883_chmode_mixer[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Channel Mode",
+ .info = alc_ch_mode_info,
+ .get = alc_ch_mode_get,
+ .put = alc_ch_mode_put,
+ },
+ { } /* end */
+};
+
+static struct hda_verb alc883_init_verbs[] = {
+ /* ADC1: mute amp left and right */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ /* ADC2: mute amp left and right */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ /* Front mixer: unmute input/output amp left and right (volume = 0) */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* Rear mixer */
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* CLFE mixer */
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* Side mixer */
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
- * mixer widget
- * Note: PASD motherboards uses the Line In 2 as the input for front panel
- * mic (mic 2)
- */
- /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
- /*
- * Set up output mixers (0x0c - 0x0e)
+ /* Front Pin: output 0 (0x0c) */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* Rear Pin: output 1 (0x0d) */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
+ /* CLFE Pin: output 2 (0x0e) */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
+ /* Side Pin: output 3 (0x0f) */
+ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
+ /* Mic (rear) pin: input vref at 80% */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Front Mic pin: input vref at 80% */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line In pin: input */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line-2 In: Headphone output (output 0 - 0x0c) */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* CD pin widget for input */
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
+ /* Input mixer2 */
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+ /* Input mixer3 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+ { }
+};
+
+/*
+ * generic initialization of ADC, input mixers and output mixers
+ */
+static struct hda_verb alc883_auto_init_verbs[] = {
+ /*
+ * Unmute ADC0-2 and set the default input to mic-in
+ */
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
+ * mixer widget
+ * Note: PASD motherboards uses the Line In 2 as the input for front panel
+ * mic (mic 2)
+ */
+ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+
+ /*
+ * Set up output mixers (0x0c - 0x0f)
+ */
+ /* set vol=0 to output mixers */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ /* set up input amps for analog loopback */
+ /* Amp Indices: DAC = 0, mixer = 1 */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
+ /* Input mixer1 */
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ //{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+ /* Input mixer2 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ //{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+
+ { }
+};
+
+/* capture mixer elements */
+static snd_kcontrol_new_t alc883_capture_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* The multiple "Capture Source" controls confuse alsamixer
+ * So call somewhat different..
+ * FIXME: the controls appear in the "playback" view!
+ */
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 2,
+ .info = alc882_mux_enum_info,
+ .get = alc882_mux_enum_get,
+ .put = alc882_mux_enum_put,
+ },
+ { } /* end */
+};
+
+/* pcm configuration: identiacal with ALC880 */
+#define alc883_pcm_analog_playback alc880_pcm_analog_playback
+#define alc883_pcm_analog_capture alc880_pcm_analog_capture
+#define alc883_pcm_digital_playback alc880_pcm_digital_playback
+#define alc883_pcm_digital_capture alc880_pcm_digital_capture
+
+/*
+ * configuration and preset
+ */
+static struct hda_board_config alc883_cfg_tbl[] = {
+ { .modelname = "3stack-dig", .config = ALC883_3ST_2ch_DIG },
+ { .modelname = "6stack-dig", .config = ALC883_6ST_DIG },
+ { .modelname = "6stack-dig-demo", .config = ALC888_DEMO_BOARD },
+ { .pci_subvendor = 0x1462, .pci_subdevice = 0x6668,
+ .config = ALC883_6ST_DIG }, /* MSI */
+ { .pci_subvendor = 0x105b, .pci_subdevice = 0x6668,
+ .config = ALC883_6ST_DIG }, /* Foxconn */
+ { .pci_subvendor = 0x1019, .pci_subdevice = 0x6668,
+ .config = ALC883_3ST_6ch_DIG }, /* ECS to Intel*/
+ { .pci_subvendor = 0x108e, .pci_subdevice = 0x534d,
+ .config = ALC883_3ST_6ch },
+ { .modelname = "auto", .config = ALC883_AUTO },
+ {}
+};
+
+static struct alc_config_preset alc883_presets[] = {
+ [ALC883_3ST_2ch_DIG] = {
+ .mixers = { alc883_3ST_2ch_mixer },
+ .init_verbs = { alc883_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .dig_out_nid = ALC883_DIGOUT_NID,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
+ .adc_nids = alc883_adc_nids,
+ .dig_in_nid = ALC883_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
+ .channel_mode = alc883_3ST_2ch_modes,
+ .input_mux = &alc883_capture_source,
+ },
+ [ALC883_3ST_6ch_DIG] = {
+ .mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
+ .init_verbs = { alc883_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .dig_out_nid = ALC883_DIGOUT_NID,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
+ .adc_nids = alc883_adc_nids,
+ .dig_in_nid = ALC883_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes),
+ .channel_mode = alc883_3ST_6ch_modes,
+ .input_mux = &alc883_capture_source,
+ },
+ [ALC883_3ST_6ch] = {
+ .mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
+ .init_verbs = { alc883_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
+ .adc_nids = alc883_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes),
+ .channel_mode = alc883_3ST_6ch_modes,
+ .input_mux = &alc883_capture_source,
+ },
+ [ALC883_6ST_DIG] = {
+ .mixers = { alc883_base_mixer, alc883_chmode_mixer },
+ .init_verbs = { alc883_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .dig_out_nid = ALC883_DIGOUT_NID,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
+ .adc_nids = alc883_adc_nids,
+ .dig_in_nid = ALC883_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes),
+ .channel_mode = alc883_sixstack_modes,
+ .input_mux = &alc883_capture_source,
+ },
+ [ALC888_DEMO_BOARD] = {
+ .mixers = { alc883_base_mixer, alc883_chmode_mixer },
+ .init_verbs = { alc883_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .dig_out_nid = ALC883_DIGOUT_NID,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
+ .adc_nids = alc883_adc_nids,
+ .dig_in_nid = ALC883_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes),
+ .channel_mode = alc883_sixstack_modes,
+ .input_mux = &alc883_capture_source,
+ },
+};
+
+
+/*
+ * BIOS auto configuration
+ */
+static void alc883_auto_set_output_and_unmute(struct hda_codec *codec,
+ hda_nid_t nid, int pin_type,
+ int dac_idx)
+{
+ /* set as output */
+ struct alc_spec *spec = codec->spec;
+ int idx;
+
+ if (spec->multiout.dac_nids[dac_idx] == 0x25)
+ idx = 4;
+ else
+ idx = spec->multiout.dac_nids[dac_idx] - 2;
+
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ pin_type);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_UNMUTE);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, idx);
+
+}
+
+static void alc883_auto_init_multi_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int i;
+
+ for (i = 0; i <= HDA_SIDE; i++) {
+ hda_nid_t nid = spec->autocfg.line_out_pins[i];
+ if (nid)
+ alc883_auto_set_output_and_unmute(codec, nid, PIN_OUT, i);
+ }
+}
+
+static void alc883_auto_init_hp_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t pin;
+
+ pin = spec->autocfg.hp_pin;
+ if (pin) /* connect to front */
+ /* use dac 0 */
+ alc883_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
+}
+
+#define alc883_is_input_pin(nid) alc880_is_input_pin(nid)
+#define ALC883_PIN_CD_NID ALC880_PIN_CD_NID
+
+static void alc883_auto_init_analog_input(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int i;
+
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ hda_nid_t nid = spec->autocfg.input_pins[i];
+ if (alc883_is_input_pin(nid)) {
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL,
+ (i <= AUTO_PIN_FRONT_MIC ?
+ PIN_VREF80 : PIN_IN));
+ if (nid != ALC883_PIN_CD_NID)
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_MUTE);
+ }
+ }
+}
+
+/* almost identical with ALC880 parser... */
+static int alc883_parse_auto_config(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int err = alc880_parse_auto_config(codec);
+
+ if (err < 0)
+ return err;
+ else if (err > 0)
+ /* hack - override the init verbs */
+ spec->init_verbs[0] = alc883_auto_init_verbs;
+ spec->mixers[spec->num_mixers] = alc883_capture_mixer;
+ spec->num_mixers++;
+ return err;
+}
+
+/* additional initialization for auto-configuration model */
+static void alc883_auto_init(struct hda_codec *codec)
+{
+ alc883_auto_init_multi_out(codec);
+ alc883_auto_init_hp_out(codec);
+ alc883_auto_init_analog_input(codec);
+}
+
+static int patch_alc883(struct hda_codec *codec)
+{
+ struct alc_spec *spec;
+ int err, board_config;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (spec == NULL)
+ return -ENOMEM;
+
+ codec->spec = spec;
+
+ board_config = snd_hda_check_board_config(codec, alc883_cfg_tbl);
+ if (board_config < 0 || board_config >= ALC883_MODEL_LAST) {
+ printk(KERN_INFO "hda_codec: Unknown model for ALC883, "
+ "trying auto-probe from BIOS...\n");
+ board_config = ALC883_AUTO;
+ }
+
+ if (board_config == ALC883_AUTO) {
+ /* automatic parse from the BIOS config */
+ err = alc883_parse_auto_config(codec);
+ if (err < 0) {
+ alc_free(codec);
+ return err;
+ } else if (! err) {
+ printk(KERN_INFO
+ "hda_codec: Cannot set up configuration "
+ "from BIOS. Using base mode...\n");
+ board_config = ALC883_3ST_2ch_DIG;
+ }
+ }
+
+ if (board_config != ALC883_AUTO)
+ setup_preset(spec, &alc883_presets[board_config]);
+
+ spec->stream_name_analog = "ALC883 Analog";
+ spec->stream_analog_playback = &alc883_pcm_analog_playback;
+ spec->stream_analog_capture = &alc883_pcm_analog_capture;
+
+ spec->stream_name_digital = "ALC883 Digital";
+ spec->stream_digital_playback = &alc883_pcm_digital_playback;
+ spec->stream_digital_capture = &alc883_pcm_digital_capture;
+
+ spec->adc_nids = alc883_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
+
+ codec->patch_ops = alc_patch_ops;
+ if (board_config == ALC883_AUTO)
+ spec->init_hook = alc883_auto_init;
+
+ return 0;
+}
+
+/*
+ * ALC262 support
+ */
+
+#define ALC262_DIGOUT_NID ALC880_DIGOUT_NID
+#define ALC262_DIGIN_NID ALC880_DIGIN_NID
+
+#define alc262_dac_nids alc260_dac_nids
+#define alc262_adc_nids alc882_adc_nids
+#define alc262_adc_nids_alt alc882_adc_nids_alt
+
+#define alc262_modes alc260_modes
+#define alc262_capture_source alc882_capture_source
+
+static snd_kcontrol_new_t alc262_base_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
+ /* HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_MUTE("PC Beelp Playback Switch", 0x0b, 0x05, HDA_INPUT), */
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("Mono Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT),
+ { } /* end */
+};
+
+static snd_kcontrol_new_t alc262_HP_BPC_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Front Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("Mono Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT),
+
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_MUTE("PC Beep Playback Switch", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_VOLUME("AUX IN Playback Volume", 0x0b, 0x06, HDA_INPUT),
+ HDA_CODEC_MUTE("AUX IN Playback Switch", 0x0b, 0x06, HDA_INPUT),
+ { } /* end */
+};
+
+#define alc262_capture_mixer alc882_capture_mixer
+#define alc262_capture_alt_mixer alc882_capture_alt_mixer
+
+/*
+ * generic initialization of ADC, input mixers and output mixers
+ */
+static struct hda_verb alc262_init_verbs[] = {
+ /*
+ * Unmute ADC0-2 and set the default input to mic-in
+ */
+ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
+ * mixer widget
+ * Note: PASD motherboards uses the Line In 2 as the input for front panel
+ * mic (mic 2)
+ */
+ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+
+ /*
+ * Set up output mixers (0x0c - 0x0e)
*/
/* set vol=0 to output mixers */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
@@ -4644,6 +5346,17 @@ static struct hda_input_mux alc262_fujit
},
};
+static struct hda_input_mux alc262_HP_capture_source = {
+ .num_items = 5,
+ .items = {
+ { "Mic", 0x0 },
+ { "Front Mic", 0x3 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ { "AUX IN", 0x6 },
+ },
+};
+
/* mute/unmute internal speaker according to the hp jack and mute state */
static void alc262_fujitsu_automute(struct hda_codec *codec, int force)
{
@@ -4867,6 +5580,93 @@ static struct hda_verb alc262_volume_ini
{ }
};
+static struct hda_verb alc262_HP_BPC_init_verbs[] = {
+ /*
+ * Unmute ADC0-2 and set the default input to mic-in
+ */
+ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
+ * mixer widget
+ * Note: PASD motherboards uses the Line In 2 as the input for front panel
+ * mic (mic 2)
+ */
+ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(5)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(6)},
+
+ /*
+ * Set up output mixers (0x0c - 0x0e)
+ */
+ /* set vol=0 to output mixers */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+
+ /* set up input amps for analog loopback */
+ /* Amp Indices: DAC = 0, mixer = 1 */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+
+ {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7023 },
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x7023 },
+ {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
+ {0x1d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
+
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
+ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
+ /* Input mixer2 */
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
+ /* Input mixer3 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
+
+ { }
+};
+
/* pcm configuration: identiacal with ALC880 */
#define alc262_pcm_analog_playback alc880_pcm_analog_playback
#define alc262_pcm_analog_capture alc880_pcm_analog_capture
@@ -4927,7 +5727,16 @@ static void alc262_auto_init(struct hda_
static struct hda_board_config alc262_cfg_tbl[] = {
{ .modelname = "basic", .config = ALC262_BASIC },
{ .modelname = "fujitsu", .config = ALC262_FUJITSU },
- { .pci_subvendor = 0x10cf, .pci_subdevice = 0x1397, .config = ALC262_FUJITSU },
+ { .pci_subvendor = 0x10cf, .pci_subdevice = 0x1397,
+ .config = ALC262_FUJITSU },
+ { .pci_subvendor = 0x103c, .pci_subdevice = 0x208c,
+ .config = ALC262_HP_BPC }, /* xw4400 */
+ { .pci_subvendor = 0x103c, .pci_subdevice = 0x3014,
+ .config = ALC262_HP_BPC }, /* xw6400 */
+ { .pci_subvendor = 0x103c, .pci_subdevice = 0x3015,
+ .config = ALC262_HP_BPC }, /* xw8400 */
+ { .pci_subvendor = 0x103c, .pci_subdevice = 0x12fe,
+ .config = ALC262_HP_BPC }, /* xw9400 */
{ .modelname = "auto", .config = ALC262_AUTO },
{}
};
@@ -4955,6 +5764,16 @@ static struct alc_config_preset alc262_p
.input_mux = &alc262_fujitsu_capture_source,
.unsol_event = alc262_fujitsu_unsol_event,
},
+ [ALC262_HP_BPC] = {
+ .mixers = { alc262_HP_BPC_mixer },
+ .init_verbs = { alc262_HP_BPC_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc262_dac_nids),
+ .dac_nids = alc262_dac_nids,
+ .hp_nid = 0x03,
+ .num_channel_mode = ARRAY_SIZE(alc262_modes),
+ .channel_mode = alc262_modes,
+ .input_mux = &alc262_HP_capture_source,
+ },
};
static int patch_alc262(struct hda_codec *codec)
@@ -4980,8 +5799,10 @@ static int patch_alc262(struct hda_codec
#endif
board_config = snd_hda_check_board_config(codec, alc262_cfg_tbl);
+
if (board_config < 0 || board_config >= ALC262_MODEL_LAST) {
- printk(KERN_INFO "hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...\n");
+ printk(KERN_INFO "hda_codec: Unknown model for ALC262, "
+ "trying auto-probe from BIOS...\n");
board_config = ALC262_AUTO;
}
@@ -4992,7 +5813,9 @@ static int patch_alc262(struct hda_codec
alc_free(codec);
return err;
} else if (! err) {
- printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using base mode...\n");
+ printk(KERN_INFO
+ "hda_codec: Cannot set up configuration "
+ "from BIOS. Using base mode...\n");
board_config = ALC262_BASIC;
}
}
@@ -5033,7 +5856,6 @@ static int patch_alc262(struct hda_codec
return 0;
}
-
/*
* ALC861 channel source setting (2/6 channel selection for 3-stack)
*/
@@ -5048,9 +5870,11 @@ static struct hda_verb alc861_threestack
/* set pin widget 18h (mic1/2) for input, for mic also enable the vref */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c },
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, //mic
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8)) }, //line in
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c },
+#if 0
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, /*mic*/
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8)) }, /*line-in*/
+#endif
{ } /* end */
};
/*
@@ -5064,11 +5888,13 @@ static struct hda_verb alc861_threestack
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x0c, AC_VERB_SET_CONNECT_SEL, 0x00 },
- { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00 },
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, //mic
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8)) }, //line in
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
+#if 0
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, /*mic*/
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8)) }, /*line in*/
+#endif
{ } /* end */
};
@@ -5352,6 +6178,11 @@ static hda_nid_t alc861_dac_nids[4] = {
0x03, 0x06, 0x05, 0x04
};
+static hda_nid_t alc660_dac_nids[3] = {
+ /* front, clfe, surround */
+ 0x03, 0x05, 0x06
+};
+
static hda_nid_t alc861_adc_nids[1] = {
/* ADC0-2 */
0x08,
@@ -5604,7 +6435,10 @@ static void alc861_auto_init(struct hda_
*/
static struct hda_board_config alc861_cfg_tbl[] = {
{ .modelname = "3stack", .config = ALC861_3ST },
- { .pci_subvendor = 0x8086, .pci_subdevice = 0xd600, .config = ALC861_3ST },
+ { .pci_subvendor = 0x8086, .pci_subdevice = 0xd600,
+ .config = ALC861_3ST },
+ { .pci_subvendor = 0x1043, .pci_subdevice = 0x81e7,
+ .config = ALC660_3ST },
{ .modelname = "3stack-dig", .config = ALC861_3ST_DIG },
{ .modelname = "6stack-dig", .config = ALC861_6ST_DIG },
{ .modelname = "auto", .config = ALC861_AUTO },
@@ -5647,6 +6481,17 @@ static struct alc_config_preset alc861_p
.adc_nids = alc861_adc_nids,
.input_mux = &alc861_capture_source,
},
+ [ALC660_3ST] = {
+ .mixers = { alc861_3ST_mixer },
+ .init_verbs = { alc861_threestack_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc660_dac_nids),
+ .dac_nids = alc660_dac_nids,
+ .num_channel_mode = ARRAY_SIZE(alc861_threestack_modes),
+ .channel_mode = alc861_threestack_modes,
+ .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
+ .adc_nids = alc861_adc_nids,
+ .input_mux = &alc861_capture_source,
+ },
};
@@ -5663,8 +6508,10 @@ static int patch_alc861(struct hda_codec
codec->spec = spec;
board_config = snd_hda_check_board_config(codec, alc861_cfg_tbl);
+
if (board_config < 0 || board_config >= ALC861_MODEL_LAST) {
- printk(KERN_INFO "hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...\n");
+ printk(KERN_INFO "hda_codec: Unknown model for ALC861, "
+ "trying auto-probe from BIOS...\n");
board_config = ALC861_AUTO;
}
@@ -5675,7 +6522,9 @@ static int patch_alc861(struct hda_codec
alc_free(codec);
return err;
} else if (! err) {
- printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using base mode...\n");
+ printk(KERN_INFO
+ "hda_codec: Cannot set up configuration "
+ "from BIOS. Using base mode...\n");
board_config = ALC861_3ST_DIG;
}
}
@@ -5706,8 +6555,12 @@ struct hda_codec_preset snd_hda_preset_r
{ .id = 0x10ec0262, .name = "ALC262", .patch = patch_alc262 },
{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
- { .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc882 },
+ { .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc883 },
{ .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 },
- { .id = 0x10ec0861, .name = "ALC861", .patch = patch_alc861 },
+ { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 },
+ { .id = 0x10ec0861, .rev = 0x100300, .name = "ALC861",
+ .patch = patch_alc861 },
+ { .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660",
+ .patch = patch_alc861 },
{} /* terminator */
};
--
1.1.3
--
Daniel T. Chen crimsun at ubuntu.com
GPG key: www.sh.nu/~crimsun/pubkey.gpg.asc
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <https://lists.ubuntu.com/archives/kernel-team/attachments/20060705/89155ee4/attachment.sig>
More information about the kernel-team
mailing list