CDROM not working with kernel 2.6.15-6-686
Tobias Hunger
tobias at aquazul.com
Fri Dec 2 20:44:31 UTC 2005
Hi there!
I just upgraded to -6-686 kernel and that works way better than the -5-686 one
(I no longer see soft lockup messages about CPU#0:-).
Unfortunately my SATA CDROM drive no longer works. It did well with the 2.6.12
kernel series from ubuntu. Ben asked me to provide the attached data for you
guys to chew on:-)
Is there anything else I can do to help with tracking down this problem?
Best Regards,
Tobias Hunger
PS: Thanks for the splendid work you guys are doing!
-------------- next part --------------
Module Size Used by
ip_conntrack_ftp 8112 0
ip_conntrack_irc 6928 0
ipt_LOG 7360 7
ipt_limit 2624 7
ipt_state 2016 41
iptable_filter 3104 1
ip_conntrack 53688 3 ip_conntrack_ftp,ip_conntrack_irc,ipt_state
nfnetlink 6808 1 ip_conntrack
ip_tables 22624 4 ipt_LOG,ipt_limit,ipt_state,iptable_filter
ext2 73864 1
aes 30016 4
dm_crypt 12776 1
loop 18120 2
dm_mod 62744 12 dm_crypt
snd_intel8x0 35132 0
snd_ac97_codec 99648 1 snd_intel8x0
snd_ac97_bus 2368 1 snd_ac97_codec
snd_pcm_oss 56224 0
snd_mixer_oss 20640 1 snd_pcm_oss
snd_pcm 95588 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 26436 1 snd_pcm
snd 59140 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
snd_page_alloc 11432 2 snd_intel8x0,snd_pcm
tsdev 8000 0
mousedev 12516 0
joydev 10432 0
pcmcia 41820 0
i810_audio 39188 0
ac97_codec 20588 1 i810_audio
soundcore 10336 2 snd,i810_audio
yenta_socket 29484 1
rsrc_nonstatic 14816 1 yenta_socket
pcmcia_core 44756 3 pcmcia,yenta_socket,rsrc_nonstatic
ath_pci 81372 0
ath_rate_sample 17000 1 ath_pci
wlan 145308 3 ath_pci,ath_rate_sample
ath_hal 148688 3 ath_pci,ath_rate_sample
parport_pc 37796 0
parport 38632 1 parport_pc
psmouse 39940 0
serio_raw 7812 0
rtc 13812 0
pcspkr 2244 0
hw_random 5556 0
ehci_hcd 36680 0
intel_agp 24508 1
agpgart 36588 1 intel_agp
uhci_hcd 34960 0
usbcore 136772 3 ehci_hcd,uhci_hcd
evdev 10176 0
reiserfs 282480 7
ide_generic 1696 0
sd_mod 20352 13
ata_piix 10532 12
ahci 14244 0
libata 64684 2 ata_piix,ahci
scsi_mod 143816 3 sd_mod,ahci,libata
generic 4932 0
ide_core 149492 2 ide_generic,generic
tg3 111588 0
thermal 13704 0
processor 26120 1 thermal
fan 4836 0
unix 30640 2
fbcon 43232 0
tileblit 2784 1 fbcon
font 8320 1 fbcon
bitblit 6464 1 fbcon
softcursor 2304 1 bitblit
vesafb 8636 0
cfbcopyarea 4096 1 vesafb
cfbimgblt 3104 1 vesafb
cfbfillrect 4352 1 vesafb
capability 4968 0
commoncap 7328 1 capability
-------------- next part --------------
0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
Subsystem: IBM: Unknown device 0575
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] #09 [2109]
0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a8100000-a81fffff
Prefetchable memory behind bridge: c0000000-c7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Address: fee00000 Data: 40c9
Capabilities: [a0] #10 [0141]
0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: a8200000-a82fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Address: fee00000 Data: 40d1
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: a8300000-a83fffff
Prefetchable memory behind bridge: 00000000c8000000-00000000c8000000
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Address: fee00000 Data: 40d9
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: IBM: Unknown device 0565
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 169
Region 4: I/O ports at 1800 [size=32]
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: IBM: Unknown device 0565
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 233
Region 4: I/O ports at 1820 [size=32]
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: IBM: Unknown device 0565
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 50
Region 4: I/O ports at 1840 [size=32]
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: IBM: Unknown device 0565
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 58
Region 4: I/O ports at 1860 [size=32]
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: IBM: Unknown device 0566
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 58
Region 0: Memory at a8000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [20a0]
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=04, subordinate=07, sec-latency=168
I/O behind bridge: 00005000-00008fff
Memory behind bridge: a8400000-b7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d7f00000
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] #0d [0000]
0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
Subsystem: IBM: Unknown device 0567
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 185
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 1880 [size=64]
Region 2: Memory at a8000800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at a8000400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: IBM: Unknown device 0574
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 225
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
Subsystem: IBM: Unknown device 0568
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03) (prog-if 80 [Master])
Subsystem: IBM: Unknown device 056a
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 18c0 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
Subsystem: IBM: Unknown device 056b
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 18e0 [size=32]
0000:01:00.0 VGA compatible controller: ATI Technologies Inc M24 1T [FireGL M24 GL] (rev 80) (prog-if 00 [VGA])
Subsystem: IBM: Unknown device 0570
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at a8100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at a8120000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #10 [0001]
Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
Subsystem: IBM: Unknown device 0577
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 169
Region 0: Memory at a8200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
Address: 0183000110540a00 Data: 0201
Capabilities: [d0] #10 [0001]
0000:04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
Subsystem: IBM: Unknown device 056c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 169
Region 0: Memory at a8410000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=04, secondary=05, subordinate=08, sec-latency=176
Memory window 0: d0000000-d1fff000 (prefetchable)
Memory window 1: aa000000-abfff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:04:02.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
Subsystem: IBM: Unknown device 057e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 66
Region 0: Memory at a8400000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
-------------- next part --------------
0000:00:00.0 0600: 8086:2590 (rev 03)
Subsystem: 1014:0575
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] #09 [2109]
0000:00:01.0 0604: 8086:2591 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a8100000-a81fffff
Prefetchable memory behind bridge: c0000000-c7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Address: fee00000 Data: 40c9
Capabilities: [a0] #10 [0141]
0000:00:1c.0 0604: 8086:2660 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: a8200000-a82fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Address: fee00000 Data: 40d1
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1c.2 0604: 8086:2664 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: a8300000-a83fffff
Prefetchable memory behind bridge: 00000000c8000000-00000000c8000000
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Address: fee00000 Data: 40d9
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1d.0 0c03: 8086:2658 (rev 03)
Subsystem: 1014:0565
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 169
Region 4: I/O ports at 1800 [size=32]
0000:00:1d.1 0c03: 8086:2659 (rev 03)
Subsystem: 1014:0565
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 233
Region 4: I/O ports at 1820 [size=32]
0000:00:1d.2 0c03: 8086:265a (rev 03)
Subsystem: 1014:0565
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 50
Region 4: I/O ports at 1840 [size=32]
0000:00:1d.3 0c03: 8086:265b (rev 03)
Subsystem: 1014:0565
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 58
Region 4: I/O ports at 1860 [size=32]
0000:00:1d.7 0c03: 8086:265c (rev 03) (prog-if 20)
Subsystem: 1014:0566
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 58
Region 0: Memory at a8000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [20a0]
0000:00:1e.0 0604: 8086:2448 (rev d3) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=04, subordinate=07, sec-latency=168
I/O behind bridge: 00005000-00008fff
Memory behind bridge: a8400000-b7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d7f00000
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] #0d [0000]
0000:00:1e.2 0401: 8086:266e (rev 03)
Subsystem: 1014:0567
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 185
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 1880 [size=64]
Region 2: Memory at a8000800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at a8000400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1e.3 0703: 8086:266d (rev 03)
Subsystem: 1014:0574
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 225
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1f.0 0601: 8086:2641 (rev 03)
Subsystem: 1014:0568
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:1f.2 0101: 8086:2653 (rev 03) (prog-if 80 [Master])
Subsystem: 1014:056a
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 18c0 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1f.3 0c05: 8086:266a (rev 03)
Subsystem: 1014:056b
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 18e0 [size=32]
0000:01:00.0 0300: 1002:3154 (rev 80)
Subsystem: 1014:0570
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at a8100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at a8120000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #10 [0001]
Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
0000:02:00.0 0200: 14e4:167d (rev 11)
Subsystem: 1014:0577
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 169
Region 0: Memory at a8200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
Address: 0183000110540a00 Data: 0201
Capabilities: [d0] #10 [0001]
0000:04:00.0 0607: 1180:0476 (rev 8d)
Subsystem: 1014:056c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 169
Region 0: Memory at a8410000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=04, secondary=05, subordinate=08, sec-latency=176
Memory window 0: d0000000-d1fff000 (prefetchable)
Memory window 1: aa000000-abfff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:04:02.0 0200: 168c:1014 (rev 01)
Subsystem: 1014:057e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 66
Region 0: Memory at a8400000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
-------------- next part --------------
te Port Service[pcie02]
[17179573.776000] Allocate Port Service[pcie03]
[17179573.776000] isapnp: Scanning for PnP cards...
[17179574.132000] isapnp: No Plug & Play device found
[17179574.144000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[17179574.148000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179574.148000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.148000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179574.148000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[17179574.148000] pnp: Device 00:08 activated.
[17179574.152000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[17179574.152000] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 225
[17179574.152000] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[17179574.152000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179574.152000] EISA: Probing bus 0 at eisa.0
[17179574.152000] Cannot allocate resource for EISA slot 1
[17179574.152000] Cannot allocate resource for EISA slot 2
[17179574.152000] Cannot allocate resource for EISA slot 3
[17179574.152000] Cannot allocate resource for EISA slot 4
[17179574.152000] Cannot allocate resource for EISA slot 5
[17179574.152000] Cannot allocate resource for EISA slot 6
[17179574.152000] Cannot allocate resource for EISA slot 7
[17179574.152000] Cannot allocate resource for EISA slot 8
[17179574.152000] EISA: Detected 0 cards.
[17179574.152000] NET: Registered protocol family 2
[17179574.164000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.196000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179574.196000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179574.196000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179574.196000] TCP: Hash tables configured (established 131072 bind 65536)
[17179574.196000] TCP reno registered
[17179574.196000] TCP bic registered
[17179574.196000] NET: Registered protocol family 8
[17179574.196000] NET: Registered protocol family 20
[17179574.196000] Using IPI No-Shortcut mode
[17179574.196000] ACPI wakeup devices:
[17179574.196000] LID SLPB UART EXP0 EXP1 EXP2 EXP3 PCI1 USB0 USB1 USB3 USB7 AC9M
[17179574.196000] ACPI: (supports S0 S3 S4 S5)
[17179574.200000] Freeing unused kernel memory: 308k freed
[17179574.228000] Capability LSM initialized
[17179574.236000] NET: Registered protocol family 1
[17179574.248000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179574.248000] ACPI: Processor [CPU] (supports 8 throttling states)
[17179574.248000] ACPI: Thermal Zone [THM0] (62 C)
[17179574.876000] tg3.c:v3.43 (Oct 24, 2005)
[17179574.876000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179574.876000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[17179574.900000] eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:11:25:b1:2e:3f
[17179574.900000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[17179574.900000] eth0: dma_rwctrl[76180000]
[17179574.920000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179574.920000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179574.920000] ACPI: bus type ide registered
[17179574.924000] SCSI subsystem initialized
[17179574.924000] libata version 1.20 loaded.
[17179574.924000] ahci 0000:00:1f.2: version 1.2
[17179574.924000] ahci: probe of 0000:00:1f.2 failed with error -12
[17179574.924000] ata_piix 0000:00:1f.2: version 1.05
[17179574.924000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179574.924000] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18C0 irq 14
[17179576.184000] ata1: dev 0 cfg 49:0f00 82:746b 83:5be8 84:4003 85:f469 86:1848 87:4003 88:203f
[17179576.184000] ata1: dev 0 ATA-6, max UDMA/100, 117210240 sectors: LBA
[17179576.184000] ata1(0): applying bridge limits
[17179576.184000] ata1: dev 0 configured for UDMA/100
[17179576.184000] scsi0 : ata_piix
[17179576.184000] Vendor: ATA Model: HTS726060M9AT00 Rev: MH4O
[17179576.184000] Type: Direct-Access ANSI SCSI revision: 05
[17179576.184000] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18C8 irq 15
[17179577.632000] ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
[17179577.632000] ata2: dev 0 ATAPI, max UDMA/33
[17179577.632000] ata2(0): applying bridge limits
[17179577.632000] ata2: dev 0 configured for UDMA/33
[17179577.632000] scsi1 : ata_piix
[17179577.640000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[17179577.640000] SCSI device sda: drive cache: write back
[17179577.640000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[17179577.640000] SCSI device sda: drive cache: write back
[17179577.640000] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 >
[17179577.816000] sd 0:0:0:0: Attached scsi disk sda
[17179580.872000] ide0: I/O resource 0x1F0-0x1F7 not free.
[17179580.872000] ide0: ports already in use, skipping probe
[17179580.872000] ide1: I/O resource 0x170-0x177 not free.
[17179580.872000] ide1: ports already in use, skipping probe
[17179581.008000] Attempting manual resume
[17179581.024000] ReiserFS: sda1: found reiserfs format "3.6" with standard journal
[17179581.044000] ReiserFS: sda1: using ordered data mode
[17179581.056000] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179581.056000] ReiserFS: sda1: checking transaction log (sda1)
[17179581.144000] ReiserFS: sda1: replayed 17 transactions in 0 seconds
[17179581.144000] ReiserFS: sda1: Using r5 hash to sort names
[17179586.860000] usbcore: registered new driver usbfs
[17179586.860000] usbcore: registered new driver hub
[17179586.876000] USB Universal Host Controller Interface driver v2.3
[17179586.876000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179586.876000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179586.876000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179586.876000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179586.876000] uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001800
[17179586.876000] hub 1-0:1.0: USB hub found
[17179586.876000] hub 1-0:1.0: 2 ports detected
[17179586.984000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 233
[17179586.984000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179586.984000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179586.984000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179586.984000] uhci_hcd 0000:00:1d.1: irq 233, io base 0x00001820
[17179586.984000] hub 2-0:1.0: USB hub found
[17179586.984000] hub 2-0:1.0: 2 ports detected
[17179587.028000] Linux agpgart interface v0.101 (c) Dave Jones
[17179587.040000] agpgart: Detected an Intel 915GM Chipset.
[17179587.056000] agpgart: AGP aperture is 256M @ 0x0
[17179587.096000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 50
[17179587.096000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179587.096000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179587.096000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179587.096000] uhci_hcd 0000:00:1d.2: irq 50, io base 0x00001840
[17179587.096000] hub 3-0:1.0: USB hub found
[17179587.096000] hub 3-0:1.0: 2 ports detected
[17179587.096000] hw_random hardware driver 1.0.0 loaded
[17179587.120000] input: PC Speaker as /class/input/input1
[17179587.136000] Real Time Clock Driver v1.12
[17179587.204000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 58
[17179587.204000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179587.204000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179587.204000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179587.204000] uhci_hcd 0000:00:1d.3: irq 58, io base 0x00001860
[17179587.204000] hub 4-0:1.0: USB hub found
[17179587.204000] hub 4-0:1.0: 2 ports detected
[17179587.312000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 58
[17179587.312000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179587.312000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179587.312000] ehci_hcd 0000:00:1d.7: debug port 1
[17179587.312000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179587.312000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179587.312000] ehci_hcd 0000:00:1d.7: irq 58, io mem 0xa8000000
[17179587.316000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179587.316000] hub 5-0:1.0: USB hub found
[17179587.316000] hub 5-0:1.0: 8 ports detected
[17179587.512000] parport: PnPBIOS parport detected.
[17179587.512000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[17179587.516000] ath_hal: module license 'Proprietary' taints kernel.
[17179587.516000] ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
[17179587.532000] wlan: 0.8.6.0 (EXPERIMENTAL)
[17179587.536000] ath_rate_sample: 1.2
[17179587.544000] ath_pci: 0.9.6.0 (EXPERIMENTAL)
[17179587.544000] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 66
[17179588.004000] Build date: Dec 2 2005
[17179588.004000] Debugging version (IEEE80211)
[17179588.004000] ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[17179588.004000] ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[17179588.004000] ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[17179588.008000] ath0: H/W encryption support: WEP AES AES_CCM TKIP
[17179588.008000] ath0: mac 5.9 phy 4.3 radio 3.6
[17179588.008000] ath0: Use hw queue 1 for WME_AC_BE traffic
[17179588.008000] ath0: Use hw queue 0 for WME_AC_BK traffic
[17179588.008000] ath0: Use hw queue 2 for WME_AC_VI traffic
[17179588.008000] ath0: Use hw queue 3 for WME_AC_VO traffic
[17179588.008000] ath0: Use hw queue 8 for CAB traffic
[17179588.008000] ath0: Use hw queue 9 for beacons
[17179588.008000] Debugging version (ATH)
[17179588.008000] ath0: Atheros 5212: mem=0xa8400000, irq=66
[17179588.028000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179588.028000] Yenta: CardBus bridge found at 0000:04:00.0 [1014:056c]
[17179588.056000] Intel 810 + AC97 Audio, version 1.01, 04:17:24 Dec 1 2005
[17179588.056000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 185
[17179588.060000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[17179588.060000] i810: Intel ICH4 found at IO 0x1880 and 0x1c00, MEM 0xa8000800 and 0xa8000400, IRQ 185
[17179588.060000] i810: Intel ICH4 mmio at 0xf8912800 and 0xf895c400
[17179588.124000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
[17179588.124000] serio: Synaptics pass-through port at isa0060/serio1/input0
[17179588.156000] Yenta: ISA IRQ mask 0x0438, PCI irq 169
[17179588.156000] Socket status: 30000006
[17179588.156000] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff
[17179588.156000] cs: IO port probe 0x5000-0x8fff: clean.
[17179588.156000] pcmcia: parent PCI bridge Memory window: 0xa8400000 - 0xb7ffffff
[17179588.156000] pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff
[17179588.168000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[17179588.216000] mice: PS/2 mouse device common for all mice
[17179588.224000] ts: Compaq touchscreen protocol output
[17179588.472000] cs: IO port probe 0x100-0x4ff: excluding 0x370-0x377 0x3f0-0x3ff 0x4d0-0x4d7
[17179588.476000] cs: IO port probe 0xc00-0xcf7: clean.
[17179588.476000] cs: IO port probe 0xa00-0xaff: clean.
[17179588.560000] i810_audio: Primary codec has ID 0
[17179588.560000] i810_audio: Audio Controller supports 6 channels.
[17179588.560000] i810_audio: Defaulting to base 2 channel mode.
[17179588.560000] i810_audio: Resetting connection 0
[17179588.560000] i810_audio: Connection 0 with codec id 0
[17179588.564000] ac97_codec: AC97 Audio codec, id: ADS116 (Analog Devices AD1981B)
[17179588.564000] i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
[17179594.736000] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[17179595.008000] input: TPPS/2 IBM TrackPoint as /class/input/input3
[17179598.056000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
[17179600.236000] loop: loaded (max 8 devices)
[17179624.372000] ReiserFS: dm-4: found reiserfs format "3.6" with standard journal
[17179625.448000] ReiserFS: dm-4: using ordered data mode
[17179625.480000] ReiserFS: dm-4: journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179625.484000] ReiserFS: dm-4: checking transaction log (dm-4)
[17179625.568000] ReiserFS: dm-4: Using r5 hash to sort names
[17179625.620000] ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
[17179626.008000] ReiserFS: dm-0: using ordered data mode
[17179626.024000] ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179626.024000] ReiserFS: dm-0: checking transaction log (dm-0)
[17179626.084000] ReiserFS: dm-0: Using r5 hash to sort names
[17179626.096000] ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
[17179626.148000] ReiserFS: dm-1: using ordered data mode
[17179626.152000] ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179626.152000] ReiserFS: dm-1: checking transaction log (dm-1)
[17179626.180000] ReiserFS: dm-1: Using r5 hash to sort names
[17179626.940000] ReiserFS: dm-11: found reiserfs format "3.6" with standard journal
[17179627.008000] ReiserFS: dm-11: using ordered data mode
[17179627.020000] ReiserFS: dm-11: journal params: device dm-11, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179627.020000] ReiserFS: dm-11: checking transaction log (dm-11)
[17179627.052000] ReiserFS: dm-11: Using r5 hash to sort names
[17179627.064000] ReiserFS: dm-9: found reiserfs format "3.6" with standard journal
[17179627.064000] ReiserFS: dm-9: using ordered data mode
[17179627.064000] ReiserFS: dm-9: journal params: device dm-9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179627.064000] ReiserFS: dm-9: checking transaction log (dm-9)
[17179627.072000] ReiserFS: dm-9: Using r5 hash to sort names
[17179627.072000] ReiserFS: dm-9: warning: Created .reiserfs_priv on dm-9 - reserved for xattr storage.
[17179627.096000] ReiserFS: dm-3: found reiserfs format "3.6" with standard journal
[17179627.096000] ReiserFS: dm-3: using ordered data mode
[17179627.096000] ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179627.100000] ReiserFS: dm-3: checking transaction log (dm-3)
[17179627.100000] ReiserFS: dm-3: Using r5 hash to sort names
[17179627.140000] Adding 1232272k swap on /dev/mapper/swap. Priority:-1 extents:1 across:1232272k
[17179629.444000] ip_tables: (C) 2000-2002 Netfilter core team
[17179630.056000] Netfilter messages via NETLINK v0.30.
[17179630.120000] ip_conntrack version 2.4 (8182 buckets, 65456 max) - 232 bytes per conntrack
More information about the kernel-team
mailing list