[Bug 633852] Re: 0cf2:6250 ENE Technology, Inc. card reader not supported
David Bensimon
633852 at bugs.launchpad.net
Wed Oct 20 14:41:14 UTC 2010
** Summary changed:
- ACER D260 card reader not working in UNE 10
+ 0cf2:6250 ENE Technology, Inc. card reader not supported
** Description changed:
a at geraldton:~$ cat /proc/version_signature
Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5
a at geraldton:~$ uname -a
Linux geraldton 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 GNU/Linux
Card reader for SD, XD, Memory stick does not work in Acer D260 Netbook
using lucid 10.04
-
- dmesg output
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc07a5000 - 0xc084a000 ( 660 kB)
- [ 0.000000] .data : 0xc0591e33 - 0xc07a4e88 (2124 kB)
- [ 0.000000] .text : 0xc0100000 - 0xc0591e33 (4679 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:2304 nr_irqs:440
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1662.625 MHz processor.
- [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.25 BogoMIPS (lpj=6650500)
- [ 0.004044] Security Framework initialized
- [ 0.004084] AppArmor: AppArmor initialized
- [ 0.004101] Mount-cache hash table entries: 512
- [ 0.004334] Initializing cgroup subsys ns
- [ 0.004344] Initializing cgroup subsys cpuacct
- [ 0.004354] Initializing cgroup subsys memory
- [ 0.004368] Initializing cgroup subsys devices
- [ 0.004374] Initializing cgroup subsys freezer
- [ 0.004379] Initializing cgroup subsys net_cls
- [ 0.004414] CPU: L1 I cache: 32K, L1 D cache: 24K
- [ 0.004421] CPU: L2 cache: 512K
- [ 0.004426] CPU: Physical Processor ID: 0
- [ 0.004431] CPU: Processor Core ID: 0
- [ 0.004438] mce: CPU supports 5 MCE banks
- [ 0.004450] CPU0: Thermal monitoring handled by SMI
- [ 0.004457] using mwait in idle threads.
- [ 0.004469] Performance Events: Atom events, Intel PMU driver.
- [ 0.008021] ... version: 3
- [ 0.008026] ... bit width: 40
- [ 0.008030] ... generic registers: 2
- [ 0.008035] ... value mask: 000000ffffffffff
- [ 0.008040] ... max period: 000000007fffffff
- [ 0.008045] ... fixed-purpose events: 3
- [ 0.008049] ... event mask: 0000000700000003
- [ 0.008058] Checking 'hlt' instruction... OK.
- [ 0.024008] Disabling 4MB page tables to avoid TLB bug
- [ 0.028293] ACPI: Core revision 20090903
- [ 0.052018] ftrace: converting mcount calls to 0f 1f 44 00 00
- [ 0.052029] ftrace: allocating 21780 entries in 43 pages
- [ 0.056096] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.056495] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.096460] CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
- [ 0.100001] Booting processor 1 APIC 0x1 ip 0x6000
- [ 0.008000] Initializing CPU#1
- [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
- [ 0.008000] CPU: L2 cache: 512K
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 0
- [ 0.008000] CPU1: Thermal monitoring handled by SMI
- [ 0.184125] CPU1: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
- [ 0.184153] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- [ 0.188035] Brought up 2 CPUs
- [ 0.188042] Total of 2 processors activated (6650.39 BogoMIPS).
- [ 0.188271] CPU0 attaching sched-domain:
- [ 0.188282] domain 0: span 0-1 level SIBLING
- [ 0.188287] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
- [ 0.188300] domain 1: span 0-1 level MC
- [ 0.188305] groups: 0-1 (cpu_power = 1178)
- [ 0.188317] CPU1 attaching sched-domain:
- [ 0.188321] domain 0: span 0-1 level SIBLING
- [ 0.188326] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
- [ 0.188338] domain 1: span 0-1 level MC
- [ 0.188342] groups: 0-1 (cpu_power = 1178)
- [ 0.188567] devtmpfs: initialized
- [ 0.188567] regulator: core version 0.5
- [ 0.188567] Time: 14:11:11 Date: 09/09/10
- [ 0.188567] NET: Registered protocol family 16
- [ 0.188567] Trying to unpack rootfs image as initramfs...
- [ 0.188567] EISA bus registered
- [ 0.188567] ACPI: bus type pci registered
- [ 0.188730] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.188739] PCI: MCFG area at e0000000 reserved in E820
- [ 0.188745] PCI: Using MMCONFIG for extended config space
- [ 0.188751] PCI: Using configuration type 1 for base access
- [ 0.193702] bio: create slab <bio-0> at 0
- [ 0.197130] ACPI: EC: Look up EC in DSDT
- [ 0.234323] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.240101] ACPI: BIOS _OSI(Linux) query ignored
- [ 0.242155] ACPI: Interpreter enabled
- [ 0.242155] ACPI: (supports S0 S3 S4 S5)
- [ 0.242155] ACPI: Using IOAPIC for interrupt routing
- [ 0.386907] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
- [ 0.387090] ACPI: Power Resource [FN00] (on)
- [ 0.387721] ACPI: No dock devices found.
- [ 0.389611] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.389803] pci 0000:00:02.0: reg 10 32bit mmio: [0x58180000-0x581fffff]
- [ 0.389816] pci 0000:00:02.0: reg 14 io port: [0x60c0-0x60c7]
- [ 0.389827] pci 0000:00:02.0: reg 18 32bit mmio pref: [0x40000000-0x4fffffff]
- [ 0.389839] pci 0000:00:02.0: reg 1c 32bit mmio: [0x58000000-0x580fffff]
- [ 0.389900] pci 0000:00:02.1: reg 10 32bit mmio: [0x58100000-0x5817ffff]
- [ 0.390062] pci 0000:00:1b.0: reg 10 64bit mmio: [0x58200000-0x58203fff]
- [ 0.390149] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.390160] pci 0000:00:1b.0: PME# disabled
- [ 0.390302] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.390314] pci 0000:00:1c.0: PME# disabled
- [ 0.390460] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.390471] pci 0000:00:1c.1: PME# disabled
- [ 0.390573] pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f]
- [ 0.390670] pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f]
- [ 0.390767] pci 0000:00:1d.2: reg 20 io port: [0x6040-0x605f]
- [ 0.390862] pci 0000:00:1d.3: reg 20 io port: [0x6020-0x603f]
- [ 0.390963] pci 0000:00:1d.7: reg 10 32bit mmio: [0x58204400-0x582047ff]
- [ 0.391054] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.391066] pci 0000:00:1d.7: PME# disabled
- [ 0.391388] pci 0000:00:1f.2: reg 10 io port: [0x60b8-0x60bf]
- [ 0.391404] pci 0000:00:1f.2: reg 14 io port: [0x60cc-0x60cf]
- [ 0.391419] pci 0000:00:1f.2: reg 18 io port: [0x60b0-0x60b7]
- [ 0.391434] pci 0000:00:1f.2: reg 1c io port: [0x60c8-0x60cb]
- [ 0.391449] pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af]
- [ 0.391465] pci 0000:00:1f.2: reg 24 32bit mmio: [0x58204000-0x582043ff]
- [ 0.391519] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.391529] pci 0000:00:1f.2: PME# disabled
- [ 0.391607] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f]
- [ 0.391742] pci 0000:01:00.0: reg 10 64bit mmio: [0x57000000-0x5703ffff]
- [ 0.391761] pci 0000:01:00.0: reg 18 io port: [0x5000-0x507f]
- [ 0.391864] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.391876] pci 0000:01:00.0: PME# disabled
- [ 0.391985] pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff]
- [ 0.392023] pci 0000:00:1c.0: bridge 32bit mmio: [0x57000000-0x57ffffff]
- [ 0.392040] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
- [ 0.392216] pci 0000:02:00.0: reg 10 64bit mmio: [0x56000000-0x56003fff]
- [ 0.392375] pci 0000:02:00.0: supports D1 D2
- [ 0.392382] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
- [ 0.392396] pci 0000:02:00.0: PME# disabled
- [ 0.392527] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
- [ 0.392538] pci 0000:00:1c.1: bridge 32bit mmio: [0x56000000-0x56ffffff]
- [ 0.392554] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x51ffffff]
- [ 0.392639] pci 0000:00:1e.0: transparent bridge
- [ 0.392687] pci_bus 0000:00: on NUMA node 0
- [ 0.392710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.393319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
- [ 0.393596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
- [ 0.405364] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
- [ 0.405719] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
- [ 0.406070] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
- [ 0.406437] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
- [ 0.406779] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
- [ 0.407135] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
- [ 0.407482] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
- [ 0.407835] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
- [ 0.408220] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.408252] vgaarb: loaded
- [ 0.408612] SCSI subsystem initialized
- [ 0.408837] libata version 3.00 loaded.
- [ 0.409068] usbcore: registered new interface driver usbfs
- [ 0.409113] usbcore: registered new interface driver hub
- [ 0.409214] usbcore: registered new device driver usb
- [ 0.409877] ACPI: WMI: Mapper loaded
- [ 0.409884] PCI: Using ACPI for IRQ routing
- [ 0.410309] NetLabel: Initializing
- [ 0.410315] NetLabel: domain hash size = 128
- [ 0.410320] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.410351] NetLabel: unlabeled traffic allowed by default
- [ 0.410450] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.410466] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 0.416096] Switching to clocksource tsc
- [ 0.420815] AppArmor: AppArmor Filesystem Enabled
- [ 0.420859] pnp: PnP ACPI init
- [ 0.420895] ACPI: bus type pnp registered
- [ 0.487017] pnp: PnP ACPI: found 9 devices
- [ 0.487026] ACPI: ACPI bus type pnp unregistered
- [ 0.487035] PnPBIOS: Disabled by ACPI PNP
- [ 0.487069] system 00:01: ioport range 0x164e-0x164f has been reserved
- [ 0.487080] system 00:01: ioport range 0x600-0x60f has been reserved
- [ 0.487089] system 00:01: ioport range 0x610-0x610 has been reserved
- [ 0.487098] system 00:01: ioport range 0x800-0x80f has been reserved
- [ 0.487107] system 00:01: ioport range 0x810-0x817 has been reserved
- [ 0.487116] system 00:01: ioport range 0x400-0x47f has been reserved
- [ 0.487125] system 00:01: ioport range 0x500-0x53f has been reserved
- [ 0.487136] system 00:01: ioport range 0xff2c-0xff2f has been reserved
- [ 0.487147] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
- [ 0.487165] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
- [ 0.487175] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
- [ 0.487186] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
- [ 0.487195] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
- [ 0.487206] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.487216] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.522409] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
- [ 0.522423] pci 0000:00:1c.0: IO window: 0x5000-0x5fff
- [ 0.522436] pci 0000:00:1c.0: MEM window: 0x57000000-0x57ffffff
- [ 0.522449] pci 0000:00:1c.0: PREFETCH window: 0x00000050000000-0x00000050ffffff
- [ 0.522464] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
- [ 0.522473] pci 0000:00:1c.1: IO window: 0x4000-0x4fff
- [ 0.522486] pci 0000:00:1c.1: MEM window: 0x56000000-0x56ffffff
- [ 0.522497] pci 0000:00:1c.1: PREFETCH window: 0x00000051000000-0x00000051ffffff
- [ 0.522512] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
- [ 0.522518] pci 0000:00:1e.0: IO window: disabled
- [ 0.522529] pci 0000:00:1e.0: MEM window: disabled
- [ 0.522539] pci 0000:00:1e.0: PREFETCH window: disabled
- [ 0.522574] alloc irq_desc for 16 on node -1
- [ 0.522581] alloc kstat_irqs on node -1
- [ 0.522598] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.522612] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.522632] alloc irq_desc for 17 on node -1
- [ 0.522638] alloc kstat_irqs on node -1
- [ 0.522649] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.522661] pci 0000:00:1c.1: setting latency timer to 64
- [ 0.522678] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.522689] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.522697] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- [ 0.522706] pci_bus 0000:01: resource 0 io: [0x5000-0x5fff]
- [ 0.522714] pci_bus 0000:01: resource 1 mem: [0x57000000-0x57ffffff]
- [ 0.522722] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
- [ 0.522731] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff]
- [ 0.522739] pci_bus 0000:02: resource 1 mem: [0x56000000-0x56ffffff]
- [ 0.522747] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x51ffffff]
- [ 0.522756] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
- [ 0.522763] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
- [ 0.522854] NET: Registered protocol family 2
- [ 0.523132] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.524060] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.525168] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.525721] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.525733] TCP reno registered
- [ 0.526004] NET: Registered protocol family 1
- [ 0.526055] pci 0000:00:02.0: Boot video device
- [ 0.526362] Simple Boot Flag at 0x44 set to 0x1
- [ 0.526842] cpufreq-nforce2: No nForce2 chipset.
- [ 0.526926] Scanning for low memory corruption every 60 seconds
- [ 0.527253] audit: initializing netlink socket (disabled)
- [ 0.527278] type=2000 audit(1284041471.523:1): initialized
- [ 0.548010] highmem bounce pool size: 64 pages
- [ 0.548027] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.553093] VFS: Disk quotas dquot_6.5.2
- [ 0.553283] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.555243] fuse init (API version 7.13)
- [ 0.555557] msgmni has been set to 1716
- [ 0.556227] alg: No test for stdrng (krng)
- [ 0.556412] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.556421] io scheduler noop registered
- [ 0.556427] io scheduler anticipatory registered
- [ 0.556433] io scheduler deadline registered
- [ 0.556564] io scheduler cfq registered (default)
- [ 0.556890] alloc irq_desc for 24 on node -1
- [ 0.556898] alloc kstat_irqs on node -1
- [ 0.556922] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
- [ 0.556943] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 0.557234] alloc irq_desc for 25 on node -1
- [ 0.557241] alloc kstat_irqs on node -1
- [ 0.557260] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
- [ 0.557278] pcieport 0000:00:1c.1: setting latency timer to 64
- [ 0.557510] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.557545] Firmware did not grant requested _OSC control
- [ 0.557605] Firmware did not grant requested _OSC control
- [ 0.557703] Firmware did not grant requested _OSC control
- [ 0.557759] Firmware did not grant requested _OSC control
- [ 0.557823] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.584976] Freeing initrd memory: 7778k freed
- [ 0.619881] ACPI: AC Adapter [AC] (off-line)
- [ 0.620087] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 0.620095] ACPI: Power Button [PWRB]
- [ 0.620190] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
- [ 0.620197] ACPI: Sleep Button [SLPB]
- [ 0.620293] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
- [ 0.620398] ACPI: Lid Switch [LID0]
- [ 0.620523] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 0.620529] ACPI: Power Button [PWRF]
- [ 0.620798] fan PNP0C0B:00: registered as cooling_device0
- [ 0.620811] ACPI: Fan [FAN] (on)
- [ 0.622094] ACPI: SSDT 3f4b7c90 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
- [ 0.622975] ACPI: SSDT 3f4b6e10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.624027] Marking TSC unstable due to TSC halts in idle
- [ 0.624164] Switching to clocksource hpet
- [ 0.624357] processor LNXCPU:00: registered as cooling_device1
- [ 0.625151] ACPI: SSDT 3f4b7f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
- [ 0.625956] ACPI: SSDT 3f4b5f10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
- [ 0.627130] processor LNXCPU:01: registered as cooling_device2
- [ 0.697604] thermal LNXTHERM:01: registered as thermal_zone0
- [ 0.697624] ACPI: Thermal Zone [THRM] (45 C)
- [ 0.698068] isapnp: Scanning for PnP cards...
- [ 0.702300] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.705903] brd: module loaded
- [ 0.707285] loop: module loaded
- [ 0.707534] input: Macintosh mouse button emulation as /devices/virtual/input/input4
- [ 0.708770] Fixed MDIO Bus: probed
- [ 0.708875] PPP generic driver version 2.4.2
- [ 0.708984] tun: Universal TUN/TAP device driver, 1.6
- [ 0.708990] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
- [ 0.709221] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.709271] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.709305] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 0.709314] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 0.709405] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- [ 0.709447] ehci_hcd 0000:00:1d.7: using broken periodic workaround
- [ 0.709468] ehci_hcd 0000:00:1d.7: debug port 1
- [ 0.713360] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 0.713395] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58204400
- [ 0.728035] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.728266] usb usb1: configuration #1 chosen from 1 choice
- [ 0.728354] hub 1-0:1.0: USB hub found
- [ 0.728374] hub 1-0:1.0: 8 ports detected
- [ 0.728532] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.728575] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.728644] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.728661] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.728669] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.728765] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 0.728808] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
- [ 0.729053] usb usb2: configuration #1 chosen from 1 choice
- [ 0.729131] hub 2-0:1.0: USB hub found
- [ 0.729150] hub 2-0:1.0: 2 ports detected
- [ 0.729269] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.729288] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 0.729296] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.729392] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- [ 0.729447] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
- [ 0.729682] usb usb3: configuration #1 chosen from 1 choice
- [ 0.729761] hub 3-0:1.0: USB hub found
- [ 0.729779] hub 3-0:1.0: 2 ports detected
- [ 0.729883] alloc irq_desc for 18 on node -1
- [ 0.729889] alloc kstat_irqs on node -1
- [ 0.729903] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.729917] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 0.729925] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 0.730011] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- [ 0.730065] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
- [ 0.730309] usb usb4: configuration #1 chosen from 1 choice
- [ 0.730384] hub 4-0:1.0: USB hub found
- [ 0.730402] hub 4-0:1.0: 2 ports detected
- [ 0.730504] alloc irq_desc for 19 on node -1
- [ 0.730510] alloc kstat_irqs on node -1
- [ 0.730522] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
- [ 0.730536] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 0.730544] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 0.730631] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- [ 0.730684] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
- [ 0.730923] usb usb5: configuration #1 chosen from 1 choice
- [ 0.730998] hub 5-0:1.0: USB hub found
- [ 0.731016] hub 5-0:1.0: 2 ports detected
- [ 0.731244] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
- [ 0.746416] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.746437] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.746779] mice: PS/2 mouse device common for all mice
- [ 0.747491] rtc_cmos 00:03: RTC can wake from S4
- [ 0.747602] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 0.747648] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
- [ 0.747957] device-mapper: uevent: version 1.0.3
- [ 0.748302] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
- [ 0.748503] device-mapper: multipath: version 1.1.0 loaded
- [ 0.748511] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 0.748842] EISA: Probing bus 0 at eisa.0
- [ 0.748868] Cannot allocate resource for EISA slot 4
- [ 0.748875] Cannot allocate resource for EISA slot 5
- [ 0.748881] Cannot allocate resource for EISA slot 6
- [ 0.748897] EISA: Detected 0 cards.
- [ 0.749316] cpuidle: using governor ladder
- [ 0.749640] cpuidle: using governor menu
- [ 0.750878] TCP cubic registered
- [ 0.751350] NET: Registered protocol family 10
- [ 0.752639] lo: Disabled Privacy Extensions
- [ 0.753529] NET: Registered protocol family 17
- [ 0.754857] Using IPI No-Shortcut mode
- [ 0.755097] PM: Resume from disk failed.
- [ 0.755125] registered taskstats version 1
- [ 0.755789] Magic number: 10:793:181
- [ 0.755921] rtc_cmos 00:03: setting system clock to 2010-09-09 14:11:12 UTC (1284041472)
- [ 0.755929] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.755934] EDD information not available.
- [ 0.763744] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
- [ 1.052381] isapnp: No Plug & Play device found
- [ 1.052453] Freeing unused kernel memory: 660k freed
- [ 1.052985] Write protecting the kernel text: 4680k
- [ 1.053059] Write protecting the kernel read-only data: 1844k
- [ 1.076088] usb 1-4: new high speed USB device using ehci_hcd and address 2
- [ 1.089361] udev: starting version 151
- [ 1.239936] usb 1-4: configuration #1 chosen from 1 choice
- [ 1.348328] ACPI: Battery Slot [BAT0] (battery present)
- [ 1.356169] usb 1-5: new high speed USB device using ehci_hcd and address 3
- [ 1.489696] usb 1-5: configuration #1 chosen from 1 choice
- [ 2.211469] ahci 0000:00:1f.2: version 3.0
- [ 2.211508] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 2.211585] alloc irq_desc for 26 on node -1
- [ 2.211593] alloc kstat_irqs on node -1
- [ 2.211619] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
- [ 2.211704] ahci: SSS flag set, parallel bus scan disabled
- [ 2.211763] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
- [ 2.211775] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
- [ 2.211789] ahci 0000:00:1f.2: setting latency timer to 64
- [ 2.212812] scsi0 : ahci
- [ 2.213146] scsi1 : ahci
- [ 2.213369] scsi2 : ahci
- [ 2.213579] scsi3 : ahci
- [ 2.214294] ata1: SATA max UDMA/133 abar m1024 at 0x58204000 port 0x58204100 irq 26
- [ 2.214306] ata2: SATA max UDMA/133 abar m1024 at 0x58204000 port 0x58204180 irq 26
- [ 2.214314] ata3: DUMMY
- [ 2.214319] ata4: DUMMY
- [ 2.696175] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.697332] ACPI Warning for \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
- [ 2.697350] ata1.00: _GTF unexpected object type 0x1
- [ 2.697641] ata1.00: ATA-8: WDC WD1600BEVT-22A23T0, 01.01A01, max UDMA/133
- [ 2.697648] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 2.698906] ata1.00: _GTF unexpected object type 0x1
- [ 2.699230] ata1.00: configured for UDMA/133
- [ 2.712374] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 01.0 PQ: 0 ANSI: 5
- [ 2.712776] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 2.713104] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
- [ 2.713243] sd 0:0:0:0: [sda] Write Protect is off
- [ 2.713251] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.713322] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.713690] sda: sda1 sda2 sda3 < sda5 sda6 >
- [ 2.789395] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.032141] ata2: SATA link down (SStatus 0 SControl 300)
- [ 3.595345] EXT4-fs (sda5): mounted filesystem with ordered data mode
- [ 15.364568] udev: starting version 151
- [ 15.415578] Adding 2971640k swap on /dev/sda6. Priority:-1 extents:1 across:2971640k
- [ 15.452671] lp: driver loaded but no devices found
- [ 15.916493] Linux agpgart interface v0.103
- [ 16.097581] agpgart-intel 0000:00:00.0: Intel IGD Chipset
- [ 16.097969] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
- [ 16.169436] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
- [ 16.368910] [drm] Initialized drm 1.1.0 20060810
- [ 16.369912] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 16.369934] atl1c 0000:01:00.0: setting latency timer to 64
- [ 16.376877] lib80211: common routines for IEEE802.11 drivers
- [ 16.376888] lib80211_crypt: registered algorithm 'NULL'
- [ 16.411232] Linux video capture interface: v2.00
- [ 16.432582] acer-wmi: Acer Laptop ACPI-WMI Extras
- [ 16.447445] wl: module license 'MIXED/Proprietary' taints kernel.
- [ 16.447455] Disabling lock debugging due to kernel taint
- [ 16.482136] atl1c 0000:01:00.0: version 1.0.0.1-NAPI
- [ 16.499904] wl 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 16.499922] wl 0000:02:00.0: setting latency timer to 64
- [ 16.573355] uvcvideo: Found UVC 1.00 device 1.3M WebCam (04f2:b1d8)
- [ 16.600838] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input6
- [ 16.600995] usbcore: registered new interface driver uvcvideo
- [ 16.601004] USB Video Class driver (v0.1.0)
- [ 16.621035] type=1505 audit(1284012688.364:2): operation="profile_load" pid=572 name="/sbin/dhclient3"
- [ 16.621796] type=1505 audit(1284012688.364:3): operation="profile_load" pid=572 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 16.622230] type=1505 audit(1284012688.364:4): operation="profile_load" pid=572 name="/usr/lib/connman/scripts/dhclient-script"
- [ 16.631054] acer-wmi: Unable to detect available WMID devices
- [ 16.726423] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 16.726438] i915 0000:00:02.0: setting latency timer to 64
- [ 16.764863] alloc irq_desc for 27 on node -1
- [ 16.764872] alloc kstat_irqs on node -1
- [ 16.764892] i915 0000:00:02.0: irq 27 for MSI/MSI-X
- [ 16.764908] [drm] set up 7M of stolen space
- [ 16.820154] lib80211_crypt: registered algorithm 'TKIP'
- [ 16.820467] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.60.48.36
- [ 17.048807] [drm] initialized overlay support
- [ 17.128198] alloc irq_desc for 28 on node -1
- [ 17.128206] alloc kstat_irqs on node -1
- [ 17.128234] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X
- [ 17.130198] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 17.330572] type=1505 audit(1284012689.072:5): operation="profile_replace" pid=690 name="/sbin/dhclient3"
- [ 17.331350] type=1505 audit(1284012689.072:6): operation="profile_replace" pid=690 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 17.332443] type=1505 audit(1284012689.076:7): operation="profile_replace" pid=690 name="/usr/lib/connman/scripts/dhclient-script"
- [ 17.341683] type=1505 audit(1284012689.084:8): operation="profile_load" pid=691 name="/usr/bin/evince"
- [ 17.360845] type=1505 audit(1284012689.104:9): operation="profile_load" pid=691 name="/usr/bin/evince-previewer"
- [ 17.440355] type=1505 audit(1284012689.184:10): operation="profile_load" pid=691 name="/usr/bin/evince-thumbnailer"
- [ 17.475190] fb0: inteldrmfb frame buffer device
- [ 17.475197] registered panic notifier
- [ 17.480816] type=1505 audit(1284012689.224:11): operation="profile_load" pid=696 name="/usr/lib/cups/backend/cups-pdf"
- [ 17.537244] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
- [ 17.605987] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
- [ 17.680916] acpi device:24: registered as cooling_device3
- [ 17.682012] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
- [ 17.682166] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
- [ 17.682229] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 17.685155] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 17.685233] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 17.691432] vga16fb: initializing
- [ 17.691444] vga16fb: mapped to 0xc00a0000
- [ 17.691454] vga16fb: not registering due to another framebuffer present
- [ 17.723459] [drm] Big FIFO is enabled
- [ 17.803048] [drm] Big FIFO is enabled
- [ 17.803068] [drm] Big FIFO is enabled
- [ 17.803169] [drm] Big FIFO is enabled
- [ 17.841272] Console: switching to colour frame buffer device 128x37
- [ 17.856695] hda_codec: ALC272: BIOS auto-probing.
- [ 17.858482] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
- [ 18.046047] [drm] Big FIFO is enabled
- [ 18.069045] [drm] Big FIFO is enabled
- [ 18.119256] ppdev: user-space parallel port driver
- [ 18.622311] CPU0 attaching NULL sched-domain.
- [ 18.622326] CPU1 attaching NULL sched-domain.
- [ 18.652661] CPU0 attaching sched-domain:
- [ 18.652672] domain 0: span 0-1 level SIBLING
- [ 18.652681] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
- [ 18.652698] domain 1: span 0-1 level MC
- [ 18.652705] groups: 0-1 (cpu_power = 1178)
- [ 18.652721] CPU1 attaching sched-domain:
- [ 18.652727] domain 0: span 0-1 level SIBLING
- [ 18.652735] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
- [ 18.652751] domain 1: span 0-1 level MC
- [ 18.652758] groups: 0-1 (cpu_power = 1178)
- [ 23.865066] CPU0 attaching NULL sched-domain.
- [ 23.865081] CPU1 attaching NULL sched-domain.
- [ 23.888162] CPU0 attaching sched-domain:
- [ 23.888172] domain 0: span 0-1 level SIBLING
- [ 23.888181] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
- [ 23.888197] domain 1: span 0-1 level MC
- [ 23.888205] groups: 0-1 (cpu_power = 1178)
- [ 23.888220] CPU1 attaching sched-domain:
- [ 23.888226] domain 0: span 0-1 level SIBLING
- [ 23.888233] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
- [ 23.888248] domain 1: span 0-1 level MC
- [ 23.888255] groups: 0-1 (cpu_power = 1178)
- [ 27.792037] eth1: no IPv6 routers present
- [ 36.884142] CE: hpet increasing min_delta_ns to 15000 nsec
ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: linux-image-2.6.32-24-generic 2.6.32-24.42
Regression: No
Reproducible: Yes
ProcVersionSignature: Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5
Uname: Linux 2.6.32-24-generic i686
NonfreeKernelModules: wl
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
AplayDevices:
- **** List of PLAYBACK Hardware Devices ****
- card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
- Subdevices: 1/1
- Subdevice #0: subdevice #0
+ **** List of PLAYBACK Hardware Devices ****
+ card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
+ Subdevices: 1/1
+ Subdevice #0: subdevice #0
Architecture: i386
ArecordDevices:
- **** List of CAPTURE Hardware Devices ****
- card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
- Subdevices: 1/1
- Subdevice #0: subdevice #0
+ **** List of CAPTURE Hardware Devices ****
+ card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
+ Subdevices: 1/1
+ Subdevice #0: subdevice #0
AudioDevicesInUse:
- USER PID ACCESS COMMAND
- /dev/snd/controlC0: a 1102 F.... pulseaudio
+ USER PID ACCESS COMMAND
+ /dev/snd/controlC0: a 1102 F.... pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
- Card hw:0 'Intel'/'HDA Intel at 0x58200000 irq 16'
- Mixer name : 'Realtek ALC272'
- Components : 'HDA:10ec0272,10250349,00100001'
- Controls : 14
- Simple ctrls : 8
+ Card hw:0 'Intel'/'HDA Intel at 0x58200000 irq 16'
+ Mixer name : 'Realtek ALC272'
+ Components : 'HDA:10ec0272,10250349,00100001'
+ Controls : 14
+ Simple ctrls : 8
Date: Thu Sep 9 14:55:43 2010
HibernationDevice: RESUME=UUID=7cb1573f-93de-4c30-a0e6-77f31eb0bed2
InstallationMedia: Ubuntu-Netbook 10.04 "Lucid Lynx" - Release i386 (20100429.4)
MachineType: Acer AOD260
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=cbbf2b1e-fbf3-4dd2-8c6b-d187ea7305c7 ro quiet splash
ProcEnviron:
- LANG=en_AU.UTF-8
- SHELL=/bin/bash
+ LANG=en_AU.UTF-8
+ SHELL=/bin/bash
RelatedPackageVersions: linux-firmware 1.34.1
RfKill:
-
+
SourcePackage: linux
dmi.bios.date: 06/04/2010
dmi.bios.vendor: Acer
dmi.bios.version: V1.06
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: AOD260
dmi.board.vendor: Acer
dmi.board.version: V1.06
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: V1.06
dmi.modalias: dmi:bvnAcer:bvrV1.06:bd06/04/2010:svnAcer:pnAOD260:pvrV1.06:rvnAcer:rnAOD260:rvrV1.06:cvnAcer:ct10:cvrV1.06:
dmi.product.name: AOD260
dmi.product.version: V1.06
dmi.sys.vendor: Acer
** Attachment added: "hamish_original_dmesg_output_from_desc.txt"
https://bugs.edge.launchpad.net/ubuntu/+source/linux/+bug/633852/+attachment/1703248/+files/hamish_original_dmesg_output_from_desc.txt
--
0cf2:6250 ENE Technology, Inc. card reader not supported
https://bugs.launchpad.net/bugs/633852
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.
More information about the kernel-bugs
mailing list