[Bug 669343] [NEW] [staging] phison Module broken: ExpressCard SSD not usable

Launchpad Bug Tracker 669343 at bugs.launchpad.net
Mon Nov 1 09:28:37 UTC 2010


You have been subscribed to a public bug:

Description:	Ubuntu 10.10
Release:	10.10

I have been using a Verbatim 32GB SSD ExpressCard that is attached via PCIe as a IDE drive.
The card works out of the box in lucid but in maverick dmesg just throws a stack trace. 
Shutdown and reboot are blocked until the card is removed.

The card needs the "phison" module.

Ubuntu lucid amd64 (good)
[   23.003156] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3)
[   23.130232] pci 0000:05:00.0: reg 10 io port: [0x00-0x07]
[   23.130265] pci 0000:05:00.0: reg 14 io port: [0x00-0x03]
[   23.130291] pci 0000:05:00.0: reg 18 io port: [0x00-0x07]
[   23.130317] pci 0000:05:00.0: reg 1c io port: [0x00-0x03]
[   23.130343] pci 0000:05:00.0: reg 20 io port: [0x00-0x0f]
[   23.130603] pci 0000:05:00.0: no hotplug settings from platform
[   23.130778] pata_acpi 0000:05:00.0: enabling device (0000 -> 0001)
[   23.130790] pata_acpi 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   23.130847] pata_acpi 0000:05:00.0: setting latency timer to 64
[   23.130875] pata_acpi 0000:05:00.0: PCI INT A disabled
[   23.137678] phison: module is from the staging directory, the quality is unknown, you have been warned.
[   23.138392] phison_e-box 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   23.138445] phison_e-box 0000:05:00.0: setting latency timer to 64
[   23.138920] scsi4 : phison_e-box
[   23.139000] scsi5 : phison_e-box
[   23.139033] ata5: PATA max UDMA/100 cmd 0x2010 ctl 0x2020 bmdma 0x2000 irq 19
[   23.139035] ata6: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2008 irq 19
[   23.970550] ata5.00: ATA-7: ExpressCard SSD, PER1.36, max UDMA/133
[   23.970553] ata5.00: 62881792 sectors, multi 0: LBA 
[   23.990561] ata5.00: configured for UDMA/100
[   23.990664] scsi 4:0:0:0: Direct-Access     ATA      ExpressCard SSD  PER1 PQ: 0 ANSI: 5
[   23.990816] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   23.990918] sd 4:0:0:0: [sdb] 62881792 512-byte logical blocks: (32.1 GB/29.9 GiB)
[   23.990955] sd 4:0:0:0: [sdb] Write Protect is off
[   23.990957] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   23.990976] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   23.991087]  sdb: sdb1
[   23.992355] sd 4:0:0:0: [sdb] Attached SCSI disk

Then the partitions can be mounted - all fine,

With maverick the output is rather long, the dmesg paste can be found here:
http://pastebin.com/gZXyF6FN

Seems to be a regression? :-/

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: expresscard maverick phison regression-release ssd
-- 
[staging] phison Module broken: ExpressCard SSD not usable
https://bugs.launchpad.net/bugs/669343
You received this bug notification because you are a member of Kernel Bugs, which is subscribed to linux in ubuntu.




More information about the kernel-bugs mailing list