[Bug 576302] Re: regression: root device not found (mptspi)
Anton Gyllenberg
anton at iki.fi
Mon May 17 13:13:28 UTC 2010
Tristan, thanks for the tip! I got it to boot by doing just that. Had to
wait quite long before mptspi was no longer in use and could be rmmoded.
Attaching a new dmesg.log now that I could boot 2.6.32-22-generic. I
guess it is at t=262.064235 where I've done the modprobe mptspi and
things start working.
** Attachment added: "dmesg output for 2.6.32-22 + re-insert mptspi"
http://launchpadlibrarian.net/48603296/dmesg.log
** Description changed:
After upgrading from Karmic to Lucid, my old Dell Poweredge no longer boots, but fails with:
Gave up waiting for root device. [...]
Alert! /dev/disk/by-uuid/d4cbfbe0-d0af-434f-aa73-40471e6cc040 does not exist. Dropping to a shell!
2.6.31-21-generic OK
2.6.32-21-generic ERROR
2.6.32-22-generic ERROR
I can boot 2.6.31-21-generic, but with 2.6.32-21-generic and
2.6.32-22-generic I get the error. I recall I got the error earlier as
well but it resolved itself by rebooting I think. Now this consistently
works with 2.6.31-21 and fails with 2.6.32-21 and -22.
My kernel command line is: root=UUID=d4cbfbe0-d0af-434f-
aa73-40471e6cc040 ro hpet=force clocksource=hpet acpi=off
Waiting and exiting, or setting rootdelay=120 doesn't help. The device
is not found, /dev/sda1 never appears. The end of the kernel output
- looks like the following. This is hand copied by typing while looking at
- the screen so there may be errors:
+ looks like the following:
- scsi2 : ioc0: LSI53C1030 B2, FwRev=01011800h, Ports=1, MaxQ=222, IRQ=25
- mptspi 0000:03:0c.1: PCI->APIC IRQ transform: INT B -> IRQ 26
- mptbase: ioc1: Initating bringup
- mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
- mptbase: ioc0: Initiating recovery
- ioc1: LSI53C1030 B2: Capabilities={Initiator}
- mptbase: ioc1: WARNING - Unexpected doorbell active!
- mptbase: ioc1: ERROR - Doorbell ACK timeout (count=4999), IntStatus=80000000!
- mptbase: ioc1: WARNING - : alt-ioc Not ready WARNING!
- mptbase: ioc0: Attempting Retry Config request type 0x4, page 0x1, action 2
- mptbase: ioc0: Retry completed ret=0x0 timeleft=3750
- mptbase: ioc1: ERROR - Doorbell INT timeout (count=4999), IntStatus=0!
- mptbase: ioc1: ERROR - Handshake reply failure!
- mptbase: ioc1: ERROR - Sending PortEnable failed(-1)!
- mptbase: ioc1: ERROR - didn't initialize properly! (-4)
- mptspi: probe of 0000:03:0c.1 failed with error -4
+ [ 2.658887] mptspi 0000:03:0c.1: PCI->APIC IRQ transform: INT B -> IRQ 26
+ [ 2.659014] mptbase: ioc1: Initiating bringup
+ [ 17.656025] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
+ [ 17.656031] mptbase: ioc0: Initiating recovery
+ [ 27.328017] ioc1: LSI53C1030 B2: Capabilities={Initiator}
+ [ 27.912022] mptbase: ioc1: WARNING - Unexpected doorbell active!
+ [ 67.920021] mptbase: ioc1: ERROR - Doorbell ACK timeout (count=4999), IntStatus=80000000!
+ [ 78.168019] mptbase: ioc1: WARNING - : alt-ioc Not ready WARNING!
+ [ 87.224023] mptbase: ioc0: Attempting Retry Config request type 0x4, page 0x1, action 2
+ [ 87.224078] mptbase: ioc0: Retry completed ret=0x0 timeleft=3750
+ [ 117.092017] mptbase: ioc1: ERROR - Doorbell INT timeout (count=4999), IntStatus=0!
+ [ 117.092022] mptbase: ioc1: ERROR - Handshake reply failure!
+ [ 117.092026] mptbase: ioc1: ERROR - Sending PortEnable failed(-1)!
+ [ 117.092038] mptbase: ioc1: ERROR - didn't initialize properly! (-4)
+ [ 117.092110] mptspi: probe of 0000:03:0c.1 failed with error -4
- I'll attach lspci and dmesg output after booting 2.6.31-21-generic that
- works.
+
+ Attached lspci and dmesg output after booting 2.6.31-21-generic that works and with 2.6.32-22 after removing and reinserting mptspi etc.
--
regression: root device not found (mptspi)
https://bugs.launchpad.net/bugs/576302
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.
More information about the kernel-bugs
mailing list