[Bug 581158] [NEW] BUG: unable to handle kernel paging request at 7edb7ff0
Jyulliano Rocha
jyulliano at gmail.com
Sun May 16 02:15:13 UTC 2010
Public bug reported:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-14-generic (buildd at rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] modified: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] modified: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] modified: 00000000e0000000 - 00000000e8000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 3786a000 - 37fefc68
[ 0.000000] Allocated new RAMDISK: 008ad000 - 01032c68
[ 0.000000] Move RAMDISK from 000000003786a000 - 0000000037fefc67 to 008ad000 - 01032c67
[ 0.000000] ACPI: RSDP 000f6250 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 7fff3000 00038 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
[ 0.000000] ACPI: FACP 7fff3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
[ 0.000000] ACPI: DSDT 7fff30c0 043ED (v01 GBT NVDAACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 7fff0000 00040
[ 0.000000] ACPI: SSDT 7fff7580 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 7fff7880 00038 (v01 GBT NVDAACPI 42302E31 NVDA 00000098)
[ 0.000000] ACPI: MCFG 7fff78c0 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
[ 0.000000] ACPI: APIC 7fff74c0 00098 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac0f6] BRK ==> [00008a9000 - 00008ac0f6]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 0001032c68] NEW RAMDISK ==> [00008ad000 - 0001032c68]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f4880] f4880
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fff0
[ 0.000000] On node 0 totalpages: 524171
[ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1033000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294626 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c203d000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520075
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=36163a14-a555-4d92-82cd-bbd2a3fc5112 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10485440 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
[ 0.000000] Memory: 2052532k/2097088k available (4565k kernel code, 43272k reserved, 2143k data, 540k init, 1187784k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2712.478 MHz processor.
[ 0.000011] spurious 8259A interrupt: IRQ7.
[ 0.001692] Console: colour VGA+ 80x25
[ 0.001694] console [tty0] enabled
[ 0.001832] hpet clockevent registered
[ 0.001835] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001841] Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.95 BogoMIPS (lpj=10849912)
[ 0.001858] Security Framework initialized
[ 0.001875] AppArmor: AppArmor initialized
[ 0.001881] Mount-cache hash table entries: 512
[ 0.001992] Initializing cgroup subsys ns
[ 0.001996] Initializing cgroup subsys cpuacct
[ 0.001999] Initializing cgroup subsys memory
[ 0.002004] Initializing cgroup subsys freezer
[ 0.002006] Initializing cgroup subsys net_cls
[ 0.002016] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.002018] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.002020] CPU: Physical Processor ID: 0
[ 0.002022] CPU: Processor Core ID: 0
[ 0.002024] mce: CPU supports 5 MCE banks
[ 0.002031] using C1E aware idle routine
[ 0.002038] Performance Counters: AMD PMU driver.
[ 0.002043] ... version: 0
[ 0.002044] ... bit width: 48
[ 0.002045] ... generic counters: 4
[ 0.002047] ... value mask: 0000ffffffffffff
[ 0.002048] ... max period: 00007fffffffffff
[ 0.002050] ... fixed-purpose counters: 0
[ 0.002051] ... counter mask: 000000000000000f
[ 0.002055] Checking 'hlt' instruction... OK.
[ 0.017660] ACPI: Core revision 20090521
[ 0.024448] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064482] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
[ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5424.70 BogoMIPS (lpj=10849404)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 5 MCE banks
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.152434] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
[ 0.152456] Brought up 2 CPUs
[ 0.152458] Total of 2 processors activated (10849.65 BogoMIPS).
[ 0.152520] CPU0 attaching sched-domain:
[ 0.152523] domain 0: span 0-1 level MC
[ 0.152525] groups: 0 1
[ 0.152530] CPU1 attaching sched-domain:
[ 0.152532] domain 0: span 0-1 level MC
[ 0.152534] groups: 1 0
[ 0.152590] Booting paravirtualized kernel on bare hardware
[ 0.152590] regulator: core version 0.5
[ 0.152590] Time: 23:01:41 Date: 05/15/10
[ 0.152590] NET: Registered protocol family 16
[ 0.152590] EISA bus registered
[ 0.152590] ACPI: bus type pci registered
[ 0.152590] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 127
[ 0.152590] PCI: MCFG area at e0000000 reserved in E820
[ 0.152590] PCI: Using MMCONFIG for extended config space
[ 0.152590] PCI: Using configuration type 1 for base access
[ 0.152961] bio: create slab <bio-0> at 0
[ 0.152961] ACPI: EC: Look up EC in DSDT
[ 0.159726] ACPI: Interpreter enabled
[ 0.159732] ACPI: (supports S0 S1 S4 S5)
[ 0.159748] ACPI: Using IOAPIC for interrupt routing
[ 0.165172] ACPI: No dock devices found.
[ 0.165243] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.165441] pci 0000:00:01.1: reg 10 io port: [0xc400-0xc43f]
[ 0.165451] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.165455] pci 0000:00:01.1: reg 24 io port: [0xc000-0xc03f]
[ 0.165472] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.165477] pci 0000:00:01.1: PME# disabled
[ 0.165521] pci 0000:00:02.0: reg 10 32bit mmio: [0xec106000-0xec106fff]
[ 0.165540] pci 0000:00:02.0: supports D1 D2
[ 0.165542] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165545] pci 0000:00:02.0: PME# disabled
[ 0.165565] pci 0000:00:02.1: reg 10 32bit mmio: [0xec107000-0xec1070ff]
[ 0.165588] pci 0000:00:02.1: supports D1 D2
[ 0.165590] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165593] pci 0000:00:02.1: PME# disabled
[ 0.165647] pci 0000:00:05.0: reg 10 32bit mmio: [0xec100000-0xec103fff]
[ 0.165670] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.165672] pci 0000:00:05.0: PME# disabled
[ 0.165702] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
[ 0.165734] pci 0000:00:07.0: reg 10 32bit mmio: [0xec104000-0xec104fff]
[ 0.165738] pci 0000:00:07.0: reg 14 io port: [0xc800-0xc807]
[ 0.165757] pci 0000:00:07.0: supports D1 D2
[ 0.165759] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165762] pci 0000:00:07.0: PME# disabled
[ 0.165781] pci 0000:00:08.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.165784] pci 0000:00:08.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.165787] pci 0000:00:08.0: reg 18 io port: [0x970-0x977]
[ 0.165791] pci 0000:00:08.0: reg 1c io port: [0xb70-0xb73]
[ 0.165794] pci 0000:00:08.0: reg 20 io port: [0xdc00-0xdc0f]
[ 0.165797] pci 0000:00:08.0: reg 24 32bit mmio: [0xec105000-0xec105fff]
[ 0.165839] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165841] pci 0000:00:09.0: PME# disabled
[ 0.165939] pci 0000:01:07.0: reg 10 io port: [0xa000-0xa0ff]
[ 0.165944] pci 0000:01:07.0: reg 14 32bit mmio: [0xec000000-0xec0001ff]
[ 0.165972] pci 0000:01:07.0: supports D1 D2
[ 0.165974] pci 0000:01:07.0: PME# supported from D1 D2 D3hot D3cold
[ 0.165977] pci 0000:01:07.0: PME# disabled
[ 0.166001] pci 0000:00:04.0: transparent bridge
[ 0.166004] pci 0000:00:04.0: bridge io port: [0xa000-0xafff]
[ 0.166007] pci 0000:00:04.0: bridge 32bit mmio: [0xec000000-0xec0fffff]
[ 0.166029] pci 0000:02:00.0: reg 10 32bit mmio: [0xea000000-0xeaffffff]
[ 0.166036] pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xdfffffff]
[ 0.166043] pci 0000:02:00.0: reg 1c 64bit mmio: [0xe8000000-0xe9ffffff]
[ 0.166047] pci 0000:02:00.0: reg 24 io port: [0xb000-0xb07f]
[ 0.166051] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.166100] pci 0000:00:09.0: bridge io port: [0xb000-0xbfff]
[ 0.166102] pci 0000:00:09.0: bridge 32bit mmio: [0xe8000000-0xebffffff]
[ 0.166105] pci 0000:00:09.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff]
[ 0.166111] pci_bus 0000:00: on NUMA node 0
[ 0.166114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.166264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.187619] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
[ 0.187713] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
[ 0.187804] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.187896] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.187987] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.188087] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.188179] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.188270] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.188362] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.188456] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.188549] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 0.188642] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[ 0.188734] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.188825] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.188918] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 0.189011] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 0.189102] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.189195] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.189286] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.189410] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 0.189530] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.189650] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.189770] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.189891] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.190016] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.190136] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.190256] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.190377] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled.
[ 0.190498] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.190623] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.190744] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.190866] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.190987] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.191108] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.191230] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.191352] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.191474] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.191595] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 0.191739] SCSI subsystem initialized
[ 0.191782] libata version 3.00 loaded.
[ 0.191782] usbcore: registered new interface driver usbfs
[ 0.191782] usbcore: registered new interface driver hub
[ 0.191782] usbcore: registered new device driver usb
[ 0.192046] ACPI: WMI: Mapper loaded
[ 0.192047] PCI: Using ACPI for IRQ routing
[ 0.204007] Bluetooth: Core ver 2.15
[ 0.204019] NET: Registered protocol family 31
[ 0.204019] Bluetooth: HCI device and connection manager initialized
[ 0.204019] Bluetooth: HCI socket layer initialized
[ 0.204019] NetLabel: Initializing
[ 0.204020] NetLabel: domain hash size = 128
[ 0.204021] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.204033] NetLabel: unlabeled traffic allowed by default
[ 0.204059] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.204063] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.212020] Switched to high resolution mode on CPU 0
[ 0.212467] Switched to high resolution mode on CPU 1
[ 0.220017] pnp: PnP ACPI init
[ 0.220033] ACPI: bus type pnp registered
[ 0.223057] pnp: PnP ACPI: found 13 devices
[ 0.223059] ACPI: ACPI bus type pnp unregistered
[ 0.223062] PnPBIOS: Disabled by ACPI PNP
[ 0.223072] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.223075] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.223077] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.223080] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.223082] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.223084] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.223088] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.223090] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
[ 0.223095] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.223098] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.223100] system 00:02: ioport range 0x295-0x314 has been reserved
[ 0.223103] system 00:02: ioport range 0x290-0x294 has been reserved
[ 0.223109] system 00:0b: iomem range 0xe0000000-0xe7ffffff has been reserved
[ 0.223113] system 00:0c: iomem range 0xd0000-0xd3fff has been reserved
[ 0.223116] system 00:0c: iomem range 0xd5800-0xd7fff has been reserved
[ 0.223119] system 00:0c: iomem range 0xf0000-0xfbfff could not be reserved
[ 0.223121] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.223124] system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved
[ 0.223126] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.223129] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.223131] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved
[ 0.223134] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.223136] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.257775] AppArmor: AppArmor Filesystem Enabled
[ 0.257794] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.257796] pci 0000:00:04.0: IO window: 0xa000-0xafff
[ 0.257800] pci 0000:00:04.0: MEM window: 0xec000000-0xec0fffff
[ 0.257803] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.257808] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.257810] pci 0000:00:09.0: IO window: 0xb000-0xbfff
[ 0.257813] pci 0000:00:09.0: MEM window: 0xe8000000-0xebffffff
[ 0.257816] pci 0000:00:09.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff
[ 0.257823] pci 0000:00:04.0: setting latency timer to 64
[ 0.257828] pci 0000:00:09.0: setting latency timer to 64
[ 0.257832] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.257834] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.257836] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 0.257838] pci_bus 0000:01: resource 1 mem: [0xec000000-0xec0fffff]
[ 0.257841] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.257843] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.257845] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.257847] pci_bus 0000:02: resource 1 mem: [0xe8000000-0xebffffff]
[ 0.257849] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xdfffffff]
[ 0.257881] NET: Registered protocol family 2
[ 0.257960] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.258228] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.258793] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.259047] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.259049] TCP reno registered
[ 0.259135] NET: Registered protocol family 1
[ 0.259192] Trying to unpack rootfs image as initramfs...
[ 0.422104] Freeing initrd memory: 7703k freed
[ 0.425952] cpufreq-nforce2: No nForce2 chipset.
[ 0.425977] Scanning for low memory corruption every 60 seconds
[ 0.426062] audit: initializing netlink socket (disabled)
[ 0.426075] type=2000 audit(1273964501.424:1): initialized
[ 0.432911] highmem bounce pool size: 64 pages
[ 0.432916] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.434073] VFS: Disk quotas dquot_6.5.2
[ 0.434121] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.434605] fuse init (API version 7.12)
[ 0.434669] msgmni has been set to 1705
[ 0.434877] alg: No test for stdrng (krng)
[ 0.434897] io scheduler noop registered
[ 0.434898] io scheduler anticipatory registered
[ 0.434900] io scheduler deadline registered
[ 0.434938] io scheduler cfq registered (default)
[ 0.459926] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.459970] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.460038] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.460091] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.460147] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.460161] pci 0000:02:00.0: Boot video device
[ 0.460234] alloc irq_desc for 24 on node -1
[ 0.460236] alloc kstat_irqs on node -1
[ 0.460244] pcieport-driver 0000:00:09.0: irq 24 for MSI/MSI-X
[ 0.460248] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.460296] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.460315] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.460421] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.460424] ACPI: Power Button [PWRF]
[ 0.460465] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.460468] ACPI: Power Button [PWRB]
[ 0.460734] processor LNXCPU:00: registered as cooling_device0
[ 0.460759] processor LNXCPU:01: registered as cooling_device1
[ 0.462974] isapnp: Scanning for PnP cards...
[ 0.815676] isapnp: No Plug & Play device found
[ 0.816639] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.816735] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.816979] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.817775] brd: module loaded
[ 0.818126] loop: module loaded
[ 0.818185] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.818347] sata_nv 0000:00:08.0: version 3.5
[ 0.818592] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 0.818596] alloc irq_desc for 23 on node -1
[ 0.818598] alloc kstat_irqs on node -1
[ 0.818604] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.818640] sata_nv 0000:00:08.0: setting latency timer to 64
[ 0.818728] scsi0 : sata_nv
[ 0.818818] scsi1 : sata_nv
[ 0.818922] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23
[ 0.818925] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23
[ 0.818996] pata_amd 0000:00:06.0: version 0.4.1
[ 0.819026] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.819087] scsi2 : pata_amd
[ 0.819144] scsi3 : pata_amd
[ 0.819659] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.819661] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.820244] Fixed MDIO Bus: probed
[ 0.820273] PPP generic driver version 2.4.2
[ 0.820354] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.820576] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.820579] alloc irq_desc for 22 on node -1
[ 0.820580] alloc kstat_irqs on node -1
[ 0.820585] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 0.820594] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.820597] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.820652] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.820677] ehci_hcd 0000:00:02.1: debug port 1
[ 0.820680] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.820695] ehci_hcd 0000:00:02.1: irq 22, io mem 0xec107000
[ 0.832011] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.832071] usb usb1: configuration #1 chosen from 1 choice
[ 0.832095] hub 1-0:1.0: USB hub found
[ 0.832102] hub 1-0:1.0: 10 ports detected
[ 0.832158] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.832381] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 0.832384] alloc irq_desc for 21 on node -1
[ 0.832385] alloc kstat_irqs on node -1
[ 0.832389] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21
[ 0.832395] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.832398] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.832427] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.832444] ohci_hcd 0000:00:02.0: irq 21, io mem 0xec106000
[ 0.890040] usb usb2: configuration #1 chosen from 1 choice
[ 0.890063] hub 2-0:1.0: USB hub found
[ 0.890073] hub 2-0:1.0: 10 ports detected
[ 0.890120] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.890190] PNP: No PS/2 controller found. Probing ports directly.
[ 0.890540] serio: i8042 KBD port at 0x60,0x64 irq 1
00:00.0 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03ea] (rev a1)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00:01.0 ISA bridge [0601]: nVidia Corporation MCP61 LPC Bridge [10de:03e0] (rev a2)
Subsystem: Giga-byte Technology Device [1458:0c11]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation MCP61 SMBus [10de:03eb] (rev a2)
Subsystem: Giga-byte Technology Device [1458:0c11]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c400 [size=64]
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at c000 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:01.2 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03f5] (rev a2)
Subsystem: Giga-byte Technology Device [1458:0c11]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f1] (rev a3) (prog-if 10)
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at ec106000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:02.1 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f2] (rev a3) (prog-if 20)
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at ec107000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ehci_hcd
00:04.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI bridge [10de:03f3] (rev a1) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: ec000000-ec0fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: [b8] Subsystem: Giga-byte Technology Device [1458:026f]
Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
00:05.0 Audio device [0403]: nVidia Corporation MCP61 High Definition Audio [10de:03f0] (rev a2)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: Memory at ec100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:06.0 IDE interface [0101]: nVidia Corporation MCP61 IDE [10de:03ec] (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology Device [1458:5002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_amd
00:07.0 Bridge [0680]: nVidia Corporation MCP61 Ethernet [10de:03ef] (rev a2)
Subsystem: Giga-byte Technology Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 25
Region 0: Memory at ec104000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at c800 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+
Address: 00000000fee0300c Data: 4181
Masking: 000000fe Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:08.0 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: Memory at ec105000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
00:09.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e8] (rev a2)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: e8000000-ebffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 4149
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 1, PowerLimit 75.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
Kernel modules: k8temp
01:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller [10ec:8185] (rev 20)
Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:8225]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at ec000000 (32-bit, non-prefetchable) [size=512]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: rtl8180
Kernel modules: rtl8180
02:00.0 VGA compatible controller [0300]: nVidia Corporation G84 [GeForce 8600 GT] [10de:0402] (rev a1)
Subsystem: Elitegroup Computer Systems Device [1019:1712]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ea000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=512M]
Region 3: Memory at e8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at b000 [size=128]
[virtual] Expansion ROM at eb000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM unknown, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information <?>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
Linux koala 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC
2009 i686 GNU/Linux
Ubuntu 2.6.31-14.48-generic
ProblemType: KernelOops
Annotation: Your system might become unstable now and might need to be restarted.
Architecture: i386
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: jyulliano 1664 F.... pulseaudio
/dev/snd/pcmC0D0p: jyulliano 1664 F...m pulseaudio
CRDA: Error: [Errno 2] Arquivo ou diretório não encontrado
Card0.Amixer.info:
Card hw:0 'NVidia'/'HDA NVidia at 0xec100000 irq 23'
Mixer name : 'Realtek ALC662 rev1'
Components : 'HDA:10ec0662,1458a002,00100101'
Controls : 33
Simple ctrls : 17
Date: Sat May 15 17:06:03 2010
DistroRelease: Ubuntu 9.10
Failure: oops
HibernationDevice: RESUME=UUID=45707aae-3a2e-45e7-a1e5-4fc975cef2ab
InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5)
Lsusb:
Bus 002 Device 003: ID 13ee:0003
Bus 002 Device 002: ID 0e6a:6001 Megawin Technology Co., Ltd
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: Gigabyte Technology Co., Ltd. M61PME-S2
NonfreeKernelModules: nvidia
Package: linux-image-2.6.31-14-generic 2.6.31-14.48
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=36163a14-a555-4d92-82cd-bbd2a3fc5112 ro quiet splash
ProcVersionSignature: Ubuntu 2.6.31-14.48-generic
RelatedPackageVersions:
linux-backports-modules-2.6.31-14-generic N/A
linux-firmware 1.24
RfKill:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
SourcePackage: linux
Tags: kernel-oops
Title: BUG: unable to handle kernel paging request at 7edb7ff0
Uname: Linux 2.6.31-14-generic i686
dmi.bios.date: 03/07/2008
dmi.bios.vendor: Award Software International, Inc.
dmi.bios.version: F2
dmi.board.name: M61PME-S2
dmi.board.vendor: Gigabyte Technology Co., Ltd.
dmi.chassis.type: 3
dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF2:bd03/07/2008:svnGigabyteTechnologyCo.,Ltd.:pnM61PME-S2:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnM61PME-S2:rvr:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
dmi.product.name: M61PME-S2
dmi.sys.vendor: Gigabyte Technology Co., Ltd.
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Tags: apport-kerneloops i386 kernel-oops
--
BUG: unable to handle kernel paging request at 7edb7ff0
https://bugs.launchpad.net/bugs/581158
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.
More information about the kernel-bugs
mailing list