[Bug 551425] Re: broadcom wifi does not properly in WPA on LUCID
mzc
mzcariaga at gmail.com
Wed Mar 31 06:28:03 UTC 2010
dmesg (hp mini 110-1116NR):
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-18-generic (buildd at rothera) (gcc
version 4.4.3 (Ubuntu 4.4.3-4ubuntu4) ) #27-Ubuntu SMP Fri Mar 26
19:51:10 UTC 2010 (Ubuntu 2.6.32-18.27-generic 2.6.32.10+drm33.1)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7b0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7b0000 - 000000003f7be000 (ACPI
data)
[ 0.000000] BIOS-e820: 000000003f7be000 - 000000003f7f0000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f800000
(reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000
(reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x3f7b0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000
(usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f7b0000 (usable)
[ 0.000000] modified: 000000003f7b0000 - 000000003f7be000 (ACPI
data)
[ 0.000000] modified: 000000003f7be000 - 000000003f7f0000 (ACPI NVS)
[ 0.000000] modified: 000000003f7f0000 - 000000003f800000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 2f28b000 - 2fa03139
[ 0.000000] ACPI: RSDP 000f9c50 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3f7b0000 0003C (v01 082109 RSDT0820 20090821
MSFT 00000097)
[ 0.000000] ACPI: FACP 3f7b0200 00084 (v02 082109 FACP0820 20090821
MSFT 00000097)
[ 0.000000] ACPI: DSDT 3f7b0430 08042 (v01 361A0 361A0F15 00000F15
INTL 20060317)
[ 0.000000] ACPI: FACS 3f7be000 00040
[ 0.000000] ACPI: APIC 3f7b0390 0005C (v01 082109 APIC0820 20090821
MSFT 00000097)
[ 0.000000] ACPI: MCFG 3f7b03f0 0003C (v01 082109 OEMMCFG 20090821
MSFT 00000097)
[ 0.000000] ACPI: OEMB 3f7be040 00224 (v01 082109 OEMB0820 20090821
MSFT 00000097)
[ 0.000000] ACPI: ASF! 3f7b8480 00075 (v32 LEGEND I865PASF 00000001
INTL 20060317)
[ 0.000000] ACPI: SSDT 3f7bebe0 004F0 (v01 PmRef CpuPm 00003000
INTL 20060317)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 -
00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d7e98] TEXT DATA BSS ==>
[0000100000 - 00008d7e98]
[ 0.000000] #4 [002f28b000 - 002fa03139] RAMDISK ==>
[002f28b000 - 002fa03139]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #6 [00008d8000 - 00008db1b4] BRK ==>
[00008d8000 - 00008db1b4]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==>
[0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==>
[0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f7b0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f7b0
[ 0.000000] On node 0 totalpages: 259915
[ 0.000000] free_area_init_node: node 0, pgdat c0796720, node_mem_map
c1001000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 256 pages used for memmap
[ 0.000000] HighMem zone: 32434 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 -
0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f800000 (gap:
3f800000:bf600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s35992 r0 d21352
u2097152
[ 0.000000] pcpu-alloc: s35992 r0 d21352 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 257883
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-18-generic
root=UUID=380aaa69-2260-4cfd-9ba7-135314eddc35 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5200320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f7b0)
[ 0.000000] Memory: 1009176k/1040064k available (4671k kernel code,
29864k reserved, 2116k data, 656k init, 130760k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a1000 - 0xc0845000 ( 656 kB)
[ 0.000000] .data : 0xc058fde3 - 0xc07a0e48 (2116 kB)
[ 0.000000] .text : 0xc0100000 - 0xc058fde3 (4671 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1595.790 MHz processor.
[ 0.008008] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3191.58 BogoMIPS (lpj=6383160)
[ 0.008047] Security Framework initialized
[ 0.008089] AppArmor: AppArmor initialized
[ 0.008107] Mount-cache hash table entries: 512
[ 0.008352] Initializing cgroup subsys ns
[ 0.008362] Initializing cgroup subsys cpuacct
[ 0.008372] Initializing cgroup subsys memory
[ 0.008387] Initializing cgroup subsys devices
[ 0.008393] Initializing cgroup subsys freezer
[ 0.008399] Initializing cgroup subsys net_cls
[ 0.008436] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008443] CPU: L2 cache: 512K
[ 0.008448] CPU: Physical Processor ID: 0
[ 0.008453] CPU: Processor Core ID: 0
[ 0.008460] mce: CPU supports 5 MCE banks
[ 0.008477] CPU0: Thermal monitoring enabled (TM2)
[ 0.008486] using mwait in idle threads.
[ 0.008498] Performance Events: Atom events, Intel PMU driver.
[ 0.008514] ... version: 3
[ 0.008519] ... bit width: 40
[ 0.008524] ... generic registers: 2
[ 0.008529] ... value mask: 000000ffffffffff
[ 0.008534] ... max period: 000000007fffffff
[ 0.008539] ... fixed-purpose events: 3
[ 0.008543] ... event mask: 0000000700000003
[ 0.008553] Checking 'hlt' instruction... OK.
[ 0.024009] Disabling 4MB page tables to avoid TLB bug
[ 0.028385] ACPI: Core revision 20090903
[ 0.048026] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.048038] ftrace: allocating 21765 entries in 43 pages
[ 0.052472] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.093205] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.096001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.012000] CPU: L2 cache: 512K
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 0
[ 0.012000] CPU1: Thermal monitoring enabled (TM2)
[ 0.180134] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.180162] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.184034] Brought up 2 CPUs
[ 0.184042] Total of 2 processors activated (6383.71 BogoMIPS).
[ 0.184283] CPU0 attaching sched-domain:
[ 0.184293] domain 0: span 0-1 level SIBLING
[ 0.184299] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.184311] domain 1: span 0-1 level MC
[ 0.184317] groups: 0-1 (cpu_power = 1178)
[ 0.184329] CPU1 attaching sched-domain:
[ 0.184334] domain 0: span 0-1 level SIBLING
[ 0.184339] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.184350] domain 1: span 0-1 level MC
[ 0.184355] groups: 0-1 (cpu_power = 1178)
[ 0.184756] devtmpfs: initialized
[ 0.185562] regulator: core version 0.5
[ 0.185602] Time: 5:39:28 Date: 03/31/10
[ 0.185699] NET: Registered protocol family 16
[ 0.185961] EISA bus registered
[ 0.185982] ACPI: bus type pci registered
[ 0.186113] PCI: MCFG configuration 0: base e0000000 segment 0 buses
0 - 255
[ 0.186120] PCI: Not using MMCONFIG.
[ 0.186414] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.186419] PCI: Using configuration type 1 for base access
[ 0.188606] Trying to unpack rootfs image as initramfs...
[ 0.192375] bio: create slab <bio-0> at 0
[ 0.194602] ACPI: EC: Look up EC in DSDT
[ 0.197407] ACPI: BIOS _OSI(Linux) query ignored
[ 0.199507] ACPI: Executed 1 blocks of module-level executable AML
code
[ 0.424165] ACPI: Interpreter enabled
[ 0.424187] ACPI: (supports S0 S3 S4 S5)
[ 0.424257] ACPI: Using IOAPIC for interrupt routing
[ 0.424384] PCI: MCFG configuration 0: base e0000000 segment 0 buses
0 - 255
[ 0.441218] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[ 0.441218] PCI: updated MCFG configuration 0: base e0000000 segment
0 buses 0 - 63
[ 0.441218] PCI: Using MMCONFIG for extended config space
[ 0.459964] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data =
0x62
[ 0.460596] ACPI: No dock devices found.
[ 0.461068] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.461282] pci 0000:00:02.0: reg 10 32bit mmio:
[0xfe980000-0xfe9fffff]
[ 0.461296] pci 0000:00:02.0: reg 14 io port: [0xdc80-0xdc87]
[ 0.461308] pci 0000:00:02.0: reg 18 32bit mmio pref:
[0xd0000000-0xdfffffff]
[ 0.461321] pci 0000:00:02.0: reg 1c 32bit mmio:
[0xfe940000-0xfe97ffff]
[ 0.461391] pci 0000:00:02.1: reg 10 32bit mmio:
[0xfe880000-0xfe8fffff]
[ 0.461544] pci 0000:00:1b.0: reg 10 64bit mmio:
[0xfe938000-0xfe93bfff]
[ 0.461620] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.461631] pci 0000:00:1b.0: PME# disabled
[ 0.461747] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.461757] pci 0000:00:1c.0: PME# disabled
[ 0.461881] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.461893] pci 0000:00:1c.1: PME# disabled
[ 0.461991] pci 0000:00:1d.0: reg 20 io port: [0xdc00-0xdc1f]
[ 0.462082] pci 0000:00:1d.1: reg 20 io port: [0xd880-0xd89f]
[ 0.462169] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
[ 0.462256] pci 0000:00:1d.3: reg 20 io port: [0xd480-0xd49f]
[ 0.462353] pci 0000:00:1d.7: reg 10 32bit mmio:
[0xfe937c00-0xfe937fff]
[ 0.462436] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.462447] pci 0000:00:1d.7: PME# disabled
[ 0.462673] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.462689] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
ACPI/GPIO/TCO
[ 0.462700] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6
GPIO
[ 0.462711] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at
0500 (mask 0003)
[ 0.462721] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at
1640 (mask 000f)
[ 0.462803] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.462818] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.462833] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[ 0.462848] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[ 0.462863] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.462964] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.463229] pci 0000:01:00.0: reg 10 64bit mmio:
[0xfeafc000-0xfeafffff]
[ 0.463462] pci 0000:01:00.0: supports D1 D2
[ 0.463616] pci 0000:00:1c.0: bridge 32bit mmio:
[0xfea00000-0xfeafffff]
[ 0.464097] pci 0000:02:00.0: reg 10 64bit mmio:
[0xfebfc000-0xfebfffff]
[ 0.464156] pci 0000:02:00.0: reg 18 io port: [0xec00-0xecff]
[ 0.464671] pci 0000:02:00.0: supports D1 D2
[ 0.464679] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.464708] pci 0000:02:00.0: PME# disabled
[ 0.464924] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[ 0.464935] pci 0000:00:1c.1: bridge 32bit mmio:
[0xfeb00000-0xfebfffff]
[ 0.465026] pci 0000:00:1e.0: transparent bridge
[ 0.465068] pci_bus 0000:00: on NUMA node 0
[ 0.465092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.465501] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.466046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.493577] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.493888] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.494186] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12
14 15)
[ 0.494478] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12
14 *15)
[ 0.494789] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.495087] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.495388] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.495698] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 0.496060] vgaarb: device added: PCI:0000:00:02.0,decodes=io
+mem,owns=io+mem,locks=none
[ 0.496091] vgaarb: loaded
[ 0.496451] SCSI subsystem initialized
[ 0.496675] libata version 3.00 loaded.
[ 0.496917] usbcore: registered new interface driver usbfs
[ 0.496961] usbcore: registered new interface driver hub
[ 0.497055] usbcore: registered new device driver usb
[ 0.497629] ACPI: WMI: Mapper loaded
[ 0.497638] PCI: Using ACPI for IRQ routing
[ 0.498166] NetLabel: Initializing
[ 0.498173] NetLabel: domain hash size = 128
[ 0.498178] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.498211] NetLabel: unlabeled traffic allowed by default
[ 0.498471] hpet clockevent registered
[ 0.498480] HPET: 3 timers in total, 0 timers will be used for
per-cpu timer
[ 0.498493] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.498509] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.504574] Switching to clocksource tsc
[ 0.509012] AppArmor: AppArmor Filesystem Enabled
[ 0.509055] pnp: PnP ACPI init
[ 0.509096] ACPI: bus type pnp registered
[ 0.514718] pnp: PnP ACPI: found 12 devices
[ 0.514726] ACPI: ACPI bus type pnp unregistered
[ 0.514737] PnPBIOS: Disabled by ACPI PNP
[ 0.514777] system 00:01: iomem range 0xfed13000-0xfed19fff has been
reserved
[ 0.514806] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.514817] system 00:08: ioport range 0x500-0x501 has been reserved
[ 0.514826] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.514836] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.514848] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.514858] system 00:08: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.514869] system 00:08: iomem range 0xfed40000-0xfed8ffff has been
reserved
[ 0.514889] system 00:09: iomem range 0xfec00000-0xfec00fff could not
be reserved
[ 0.514900] system 00:09: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.514919] system 00:0a: iomem range 0xe0000000-0xe3ffffff has been
reserved
[ 0.514938] system 00:0b: iomem range 0x0-0x9ffff could not be
reserved
[ 0.514948] system 00:0b: iomem range 0xc0000-0xcffff could not be
reserved
[ 0.514958] system 00:0b: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.514968] system 00:0b: iomem range 0x100000-0x3f7fffff could not
be reserved
[ 0.514979] system 00:0b: iomem range 0xfed90000-0xffffffff could not
be reserved
[ 0.550183] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.550197] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.550210] pci 0000:00:1c.0: MEM window: 0xfea00000-0xfeafffff
[ 0.550223] pci 0000:00:1c.0: PREFETCH window:
0x00000040000000-0x000000401fffff
[ 0.550240] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.550250] pci 0000:00:1c.1: IO window: 0xe000-0xefff
[ 0.550262] pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff
[ 0.550274] pci 0000:00:1c.1: PREFETCH window:
0x00000040200000-0x000000403fffff
[ 0.550289] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.550295] pci 0000:00:1e.0: IO window: disabled
[ 0.550306] pci 0000:00:1e.0: MEM window: disabled
[ 0.550315] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.550343] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.550361] alloc irq_desc for 16 on node -1
[ 0.550368] alloc kstat_irqs on node -1
[ 0.550416] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 0.550429] pci 0000:00:1c.0: setting latency timer to 64
[ 0.550450] alloc irq_desc for 17 on node -1
[ 0.550456] alloc kstat_irqs on node -1
[ 0.550467] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 0.550479] pci 0000:00:1c.1: setting latency timer to 64
[ 0.550494] pci 0000:00:1e.0: setting latency timer to 64
[ 0.550506] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.550514] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.550523] pci_bus 0000:01: resource 0 io: [0x1000-0x1fff]
[ 0.550532] pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.550541] pci_bus 0000:01: resource 2 pref mem
[0x40000000-0x401fffff]
[ 0.550550] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.550558] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.550567] pci_bus 0000:02: resource 2 pref mem
[0x40200000-0x403fffff]
[ 0.550576] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.550585] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.550686] NET: Registered protocol family 2
[ 0.550973] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.551919] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.553083] TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.553642] TCP: Hash tables configured (established 131072 bind
65536)
[ 0.553651] TCP reno registered
[ 0.553927] NET: Registered protocol family 1
[ 0.553986] pci 0000:00:02.0: Boot video device
[ 0.554778] cpufreq-nforce2: No nForce2 chipset.
[ 0.554864] Scanning for low memory corruption every 60 seconds
[ 0.555221] audit: initializing netlink socket (disabled)
[ 0.555248] type=2000 audit(1270013967.554:1): initialized
[ 0.576763] highmem bounce pool size: 64 pages
[ 0.576780] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.582003] VFS: Disk quotas dquot_6.5.2
[ 0.582200] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.584309] fuse init (API version 7.13)
[ 0.584601] msgmni has been set to 1716
[ 0.585276] alg: No test for stdrng (krng)
[ 0.585475] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.585486] io scheduler noop registered
[ 0.585492] io scheduler anticipatory registered
[ 0.585498] io scheduler deadline registered
[ 0.585635] io scheduler cfq registered (default)
[ 0.585976] alloc irq_desc for 24 on node -1
[ 0.585985] alloc kstat_irqs on node -1
[ 0.586007] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.586025] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.586293] alloc irq_desc for 25 on node -1
[ 0.586300] alloc kstat_irqs on node -1
[ 0.586317] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.586333] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.586601] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.586845] pciehp: PCI Express Hot Plug Controller Driver version:
0.4
[ 0.588619] ACPI: AC Adapter [AC0] (on-line)
[ 0.588916] input: Lid Switch
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0D:00/input/input0
[ 0.589455] ACPI: Lid Switch [LID]
[ 0.589612] input: Sleep Button
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.589623] ACPI: Sleep Button [SLPB]
[ 0.589766] input: Power Button
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.589776] ACPI: Power Button [PWRB]
[ 0.589918] input: Power Button
as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.589927] ACPI: Power Button [PWRF]
[ 0.591743] ACPI: SSDT 3f7be340 0023C (v01 PmRef Cpu0Ist 00003000
INTL 20060317)
[ 0.592948] ACPI: SSDT 3f7be610 005D0 (v01 PmRef Cpu0Cst 00003001
INTL 20060317)
[ 0.593925] Monitor-Mwait will be used to enter C-1 state
[ 0.594024] Monitor-Mwait will be used to enter C-2 state
[ 0.594101] Monitor-Mwait will be used to enter C-3 state
[ 0.594122] Marking TSC unstable due to TSC halts in idle
[ 0.594266] processor LNXCPU:00: registered as cooling_device0
[ 0.594399] ACPI: SSDT 3f7be270 000CC (v01 PmRef Cpu1Ist 00003000
INTL 20060317)
[ 0.594399] ACPI: SSDT 3f7be580 00085 (v01 PmRef Cpu1Cst 00003000
INTL 20060317)
[ 0.594399] Switching to clocksource hpet
[ 0.605307] processor LNXCPU:01: registered as cooling_device1
[ 0.609689] Freeing initrd memory: 7648k freed
[ 0.613555] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.613605] ACPI: Thermal Zone [THRM] (33 C)
[ 0.621628] isapnp: Scanning for PnP cards...
[ 0.622220] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.626035] brd: module loaded
[ 0.627489] loop: module loaded
[ 0.627743] input: Macintosh mouse button emulation
as /devices/virtual/input/input4
[ 0.627985] ata_piix 0000:00:1f.1: version 2.13
[ 0.628046] alloc irq_desc for 18 on node -1
[ 0.628053] alloc kstat_irqs on node -1
[ 0.628069] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 0.628151] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.628328] scsi0 : ata_piix
[ 0.628553] scsi1 : ata_piix
[ 0.632371] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0
irq 14
[ 0.632381] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8
irq 15
[ 0.633449] Fixed MDIO Bus: probed
[ 0.633558] PPP generic driver version 2.4.2
[ 0.633695] tun: Universal TUN/TAP device driver, 1.6
[ 0.633702] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 0.633956] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 0.634008] alloc irq_desc for 23 on node -1
[ 0.634014] alloc kstat_irqs on node -1
[ 0.634031] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 0.634062] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.634071] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.634168] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 0.634212] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.634232] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.638121] ehci_hcd 0000:00:1d.7: cache line size of 32 is not
supported
[ 0.638169] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe937c00
[ 0.642645] ata2: port disabled. ignoring.
[ 0.647238] ACPI: Battery Slot [BAT1] (battery present)
[ 0.656034] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.656302] usb usb1: configuration #1 chosen from 1 choice
[ 0.656391] hub 1-0:1.0: USB hub found
[ 0.656413] hub 1-0:1.0: 8 ports detected
[ 0.656589] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.656635] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.656713] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 0.656730] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.656739] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.656839] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 0.656884] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
[ 0.657145] usb usb2: configuration #1 chosen from 1 choice
[ 0.657225] hub 2-0:1.0: USB hub found
[ 0.657244] hub 2-0:1.0: 2 ports detected
[ 0.657365] alloc irq_desc for 19 on node -1
[ 0.657372] alloc kstat_irqs on node -1
[ 0.657387] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 0.657406] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.657414] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.657510] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 0.657566] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
[ 0.657822] usb usb3: configuration #1 chosen from 1 choice
[ 0.657906] hub 3-0:1.0: USB hub found
[ 0.657924] hub 3-0:1.0: 2 ports detected
[ 0.658032] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 0.658046] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.658055] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.658144] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 0.658202] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 0.658453] usb usb4: configuration #1 chosen from 1 choice
[ 0.658536] hub 4-0:1.0: USB hub found
[ 0.658554] hub 4-0:1.0: 2 ports detected
[ 0.658665] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low)
-> IRQ 16
[ 0.658678] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.658687] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.658776] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 0.658830] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d480
[ 0.659078] usb usb5: configuration #1 chosen from 1 choice
[ 0.659155] hub 5-0:1.0: USB hub found
[ 0.659174] hub 5-0:1.0: 2 ports detected
[ 0.659419] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 0.663114] i8042.c: Detected active multiplexing controller, rev
1.1.
[ 0.665727] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.665751] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.665841] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.665912] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.665982] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.666339] mice: PS/2 mouse device common for all mice
[ 0.666768] rtc_cmos 00:03: RTC can wake from S4
[ 0.666877] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.666928] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.667253] device-mapper: uevent: version 1.0.3
[ 0.667553] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel at redhat.com
[ 0.667751] device-mapper: multipath: version 1.1.0 loaded
[ 0.667758] device-mapper: multipath round-robin: version 1.0.0
loaded
[ 0.668133] EISA: Probing bus 0 at eisa.0
[ 0.668147] Cannot allocate resource for EISA slot 1
[ 0.668185] EISA: Detected 0 cards.
[ 0.668624] cpuidle: using governor ladder
[ 0.668964] cpuidle: using governor menu
[ 0.670278] TCP cubic registered
[ 0.670773] NET: Registered protocol family 10
[ 0.672075] lo: Disabled Privacy Extensions
[ 0.673004] NET: Registered protocol family 17
[ 0.674032] Using IPI No-Shortcut mode
[ 0.674290] PM: Resume from disk failed.
[ 0.674331] registered taskstats version 1
[ 0.675185] Magic number: 2:970:669
[ 0.675320] rtc_cmos 00:03: setting system clock to 2010-03-31
05:39:28 UTC (1270013968)
[ 0.675329] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.675334] EDD information not available.
[ 0.700642] input: AT Translated Set 2 keyboard
as /devices/platform/i8042/serio0/input/input5
[ 0.800612] ata1.00: CFA: SanDisk pSSD 16GB, SSD 4.46, max UDMA/66
[ 0.800621] ata1.00: 32014080 sectors, multi 0: LBA
[ 0.801269] ata1.00: configured for UDMA/66
[ 0.968045] usb 1-4: new high speed USB device using ehci_hcd and
address 2
[ 0.975484] isapnp: No Plug & Play device found
[ 0.975721] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD 16G
SSD PQ: 0 ANSI: 5
[ 0.976031] sd 0:0:0:0: [sda] 32014080 512-byte logical blocks: (16.3
GB/15.2 GiB)
[ 0.976127] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.976214] sd 0:0:0:0: [sda] Write Protect is off
[ 0.976224] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.976321] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.976682] sda: sda1 sda2 < sda5 >
[ 0.979531] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.979562] Freeing unused kernel memory: 656k freed
[ 0.980207] Write protecting the kernel text: 4672k
[ 0.980284] Write protecting the kernel read-only data: 1840k
[ 1.018800] udev: starting version 151
[ 1.131484] usb 1-4: configuration #1 chosen from 1 choice
[ 1.342138] sky2 driver version 1.25
[ 1.342315] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 1.342382] sky2 0000:02:00.0: setting latency timer to 64
[ 1.342517] sky2 0000:02:00.0: Yukon-2 FE+ chip revision 0
[ 1.343094] alloc irq_desc for 26 on node -1
[ 1.343103] alloc kstat_irqs on node -1
[ 1.343191] sky2 0000:02:00.0: irq 26 for MSI/MSI-X
[ 1.359752] sky2 eth0: addr 00:24:81:5c:9b:aa
[ 1.369044] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 6.757136] Adding 715768k swap on /dev/sda5. Priority:-1 extents:1
across:715768k
[ 6.860402] udev: starting version 151
[ 7.269383] lib80211: common routines for IEEE802.11 drivers
[ 7.269394] lib80211_crypt: registered algorithm 'NULL'
[ 7.273199] Linux agpgart interface v0.103
[ 7.288173] intel_rng: FWH not detected
[ 7.347495] wl: module license 'MIXED/Proprietary' taints kernel.
[ 7.347507] Disabling lock debugging due to kernel taint
[ 7.482669] wl 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 7.482693] wl 0000:01:00.0: setting latency timer to 64
[ 7.528202] input: Video Bus
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 7.528356] ACPI: Video Device [IGD] (multi-head: yes rom: no post:
no)
[ 7.584258] Linux video capture interface: v2.00
[ 7.635959] lp: driver loaded but no devices found
[ 7.672791] uvcvideo: Found UVC 1.00 device Webcam-101 (10f1:1a08)
[ 7.689766] input: Webcam-101
as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input7
[ 7.690097] usbcore: registered new interface driver uvcvideo
[ 7.690232] USB Video Class driver (v0.1.0)
[ 7.754227] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 7.754526] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 7.758373] agpgart-intel 0000:00:00.0: AGP aperture is 256M @
0xd0000000
[ 7.761658] lib80211_crypt: registered algorithm 'TKIP'
[ 7.766237] [drm] Initialized drm 1.1.0 20060810
[ 7.847953] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller
5.60.48.36
[ 7.894389] type=1505 audit(1270013975.717:2):
operation="profile_load" pid=606 name="/sbin/dhclient3"
[ 7.895269] type=1505 audit(1270013975.717:3):
operation="profile_load" pid=606
name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 7.895734] type=1505 audit(1270013975.717:4):
operation="profile_load" pid=606
name="/usr/lib/connman/scripts/dhclient-script"
[ 8.032920] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 8.032935] i915 0000:00:02.0: setting latency timer to 64
[ 8.068716] [drm] set up 7M of stolen space
[ 8.204874] [drm] initialized overlay support
[ 8.577714] sky2 eth0: enabling interface
[ 8.581042] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.608291] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps:
0xd04711/0xa00000
[ 8.709118] input: SynPS/2 Synaptics TouchPad
as /devices/platform/i8042/serio4/input/input8
[ 8.754940] fb0: inteldrmfb frame buffer device
[ 8.754949] registered panic notifier
[ 8.754970] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 8.798253] vga16fb: initializing
[ 8.798267] vga16fb: mapped to 0xc00a0000
[ 8.798278] vga16fb: not registering due to another framebuffer
present
[ 8.808798] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 8.808875] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.841691] type=1505 audit(1270013976.665:5):
operation="profile_load" pid=695
name="/usr/share/gdm/guest-session/Xsession"
[ 8.849110] type=1505 audit(1270013976.673:6):
operation="profile_replace" pid=698 name="/sbin/dhclient3"
[ 8.850023] type=1505 audit(1270013976.673:7):
operation="profile_replace" pid=698
name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 8.857682] type=1505 audit(1270013976.681:8):
operation="profile_replace" pid=698
name="/usr/lib/connman/scripts/dhclient-script"
[ 8.879392] type=1505 audit(1270013976.701:9):
operation="profile_load" pid=700 name="/usr/bin/evince"
[ 8.893168] type=1505 audit(1270013976.717:10):
operation="profile_load" pid=700 name="/usr/bin/evince-previewer"
[ 8.907020] type=1505 audit(1270013976.729:11):
operation="profile_load" pid=700 name="/usr/bin/evince-thumbnailer"
[ 8.928944] input: HDA Digital PCBeep
as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 8.950184] input: HDA Intel Line In at Ext Rear Jack
as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.950442] input: HDA Intel Mic at Sep Rear Jack
as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.950663] input: HDA Intel Mic at Ext Rear Jack
as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.950879] input: HDA Intel HP Out at Ext Rear Jack
as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 9.011490] Console: switching to colour frame buffer device 128x37
[ 9.531435] ppdev: user-space parallel port driver
--
broadcom wifi does not properly in WPA on LUCID
https://bugs.launchpad.net/bugs/551425
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.
More information about the kernel-bugs
mailing list