[Bug 551491] Re: BSP update for Marvell Dove kernel LSP 5.1.0

[Eric Miao]

A comparison of all the commits between LSP 5.1.0 and ubuntu kernel
shows the following list, I've marked them with '+/-/X', which means:

'+' this commit is missing in ubuntu kernel and will be merged
'-' this commit is either useless in ubuntu kernel or is reverted in the original version and will not be merged
'X' this commit has already been merged in ubuntu kernel

-  dove: set version to 5.1.0
+  eth643: fix suspend/resume by deatach/attach phy
+  dove: disable CH7025_COMPOSITE
+  remove dove_avng_x0_defconfig and dove_avng_y1_defconfig
-  dove: set version to 5.1.0-rc3
+  enable bmm driver as module in dove_avng_x0_defconfig
+  rt5611: only swap touchscreen Y-axis for ANDROID
+  Fix ADI9889 PM suspend/resume issue
+  refine the comments
+  Remove unused function.
+  Lower wait for vsync's debug message level and double confirm isr before printing the message.
+  Lower debug message's level and mark it
+  Fix warning message when compiling
+  Fix wrong bit operation
+  Added Headset detection feature.
+  fix ADI9889/9389 HDMI audio no sound (SPDIF) issue
+  update dove_avng_x0_defconfig and dove_avng_y1_defconfig
X  sound: skip error handling inside soc_pcm_open

+  dove: alway use the galcore name for the gpu driver
-  dove: set version to 5.1.0-rc2
+  dove: disable MTD_VERIFY_WRITE and enable MTD test support
+  dove: build dmatest as module
+  Modify dove_gpu's name to galcore for Android to keep align with other Android platform.
+  DVS: Fix compilation error and disable DVS by default for AVD1 board
+  dvs: make changes to dove_rd_avng_setup.c
+  add back rt5630 i2c device in dove-rd-avng-setup.c
+  Fix various settings for new AV-D1 X0 boards
+  Enable two Android PMEM device files: /dev/pmem --> 24M, for Graphics /dev/pmem_adsp --> 64M, for Video
+  Decrease ALSA soc period_size min and max parameter to fix video not fluent on Android issue. Signed-off-by: Steve Guo <steve.guo at marvell.com>
X  Swap touchscreen Y axis Signed-off-by: Steve Guo <steve.guo at marvell.com>
+  Disabled some annonying debug information of KG2 due to it flashs console output Signed-off-by: Steve Guo <steve.guo at marvell.com>
+  Fix EDID parsing error in ADI9889 device driver
+  Fix compiling error on Android caused by the patch d4cc16c82748d07258b3808d1f572d69640526bc
+  Disable ADI9889 by default to remove this error during kernel booting: "ERROR at adi9889_error_callback - error code 14"
+  Update standby mode support for AV-D1 X0 board.
X  disable some andriod features in dove_avng_x0_defconfig and dove_avng_y1_defconfig
X  DVS: Fixed a potential conflict of defining dvs_enable as global for two diffrent baords Signed-off-by: Maen Suleiman <maen at marvell.com>
+  config: small change to align with Ubuntu kernel configuration

-  dove: set version to 5.1.0-rc1

X  UBUNTU: sub-makefile invocation should use $SHELL and standardise script
X  UBUNTU: SAUCE: Enable CPUFREQ by default

-  dove: set version to 5.0.0
X  UBUNTU: SAUCE: dove: disable conflicting v6 cache fns in zImage head.S

X  arm: disable L2 cache in the v7 finish function
X  arm: invalidate TLBs when enabling mmu
X  UBUNTU: SAUCE: arm: Fix init_atags_procfs() to check tag->hdr.size
X  ARM: 5885/1: arm: Flush TLB entries in setup_mm_for_reboot()
X  ARM: 5886/1: arm: Fix cpu_proc_fin() for proc-v7.S and make kexec work
-  dove: set version to 5.0.0-rc4

X  ARM: VFP: preserve the HW context when calling signal handlers
X  ARM: VFP: add support to sync the VFP state of the current thread
-  dove: set version to 5.0.0-rc3
X  pm: restrict the new standby fix on the board only to DB boards with Dove X0 chip and enable the possibility of using the old mode for boards without the ECO passing "standby_fix=0" through the kernel command line ( In U-Boot) .

X  dove: configure pm mpps for new revision of db board

X  Dove PM: Change deepIdle default to disable and add new command line kernel parameter "pmu_enable" that can be passed to enable deepIdle if needed
X  Marvell Dove VFP errata
X  ARM VFP supprot code bug: If any of the status flags are set, update the FPSCR
-  dove: set version to 5.0.0-rc2

-  dove: set version to 5.0.0-rc1

-  Revert "ARM: check for cpu_match in the lookup process code"

-  Revert "dove: clean usage of CONFIG_DOVE_DEBUGGER_MODE_V6"

+  update missed mcu-ds2782 battery driver
X  PM: add FB notifier to manage Book/Deep-Idle toggeling

X  Roll back wait for vsync mechanism to wait_event_interruptable_timeout and give timeout delay from 40ms to 4ms.
X  Add more resolution support in kernel driver according VGA timing spec
X  Remove unused include file and declaration
-  dove: clean usage of CONFIG_DOVE_DEBUGGER_MODE_V6
-  dove: enable cpu mode (v6/v7) in run-time detection
-  ARM: provide the cpu_match function to PJ4
-  ARM: check for cpu_match in the lookup process code
X  ARM: introduce the cpu_match function to the proc_info
X  ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options
+  dove: add PJ4 entries to proc-v6/7
X  dove: set SKB_HEADROOM to 32 instead of 16
X  kirkwood: fix compilation errors
X  mv643xx_eth: don't include cache padding in rx desc buffer size
X  Fix thread stack overflow caused by Dove NAND HAL driver
-  dove: set version to 4.2.1-dev
X  dove: disable highmem and enable CONFIG_VMSPLIT_2G
X  pcie - add option to disable scan by command line parameter
X  LCD: disabled CONFIG_DOVEFB_SINGLE_DISPLAY_ACCURATE_PCLK and instead disabled accurate clock option in runtime if both LCD units are enabled; this will enable using the same uImage for dual and non-dual mode.
+  add option to reserve memory for PVT tests
+  Fix Issue: resume procedure must reprogram external clock as well.
X  bmm: export outer_cache

-- 
BSP update for Marvell Dove kernel LSP 5.1.0
https://bugs.launchpad.net/bugs/551491
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux-mvl-dove in ubuntu.