[Bug 545334] [NEW] 2.6.32-16-generic: oops when using cassini ethernet adapter

Daniel van Eeden launchpad at myname.nl
Tue Mar 23 19:05:18 UTC 2010 

Public bug reported:

[ 2613.010052] eth3: resuming
[ 2613.020015] eth3: sw reset failed.
[ 2613.020015] eth3: mac tx[-1]/rx[-1] reset failed [ffffffff]
[ 2613.020015] eth3: mac tx[-1]/rx[-1] reset failed [ffffffff]
[ 2615.210076] eth3: Link up at 1000 Mbps, full-duplex.
[ 2615.210079] eth3: Pause is enabled (rxfifo: 16384 off: 13312 on: 11776)
[ 2615.319251] br0: port 1(eth3) entering learning state
[ 2625.890020] eth3: no IPv6 routers present
[ 2628.990019] br0: port 2(eth0) entering forwarding state
[ 2630.310021] br0: port 1(eth3) entering forwarding state
[ 8390.012533] ------------[ cut here ]------------
[ 8390.012552] WARNING: at /build/buildd/linux-2.6.32/net/sched/sch_generic.c:261 dev_watchdog+0x262/0x270()
[ 8390.012558] Hardware name: Ultra20 M2
[ 8390.012562] NETDEV WATCHDOG: eth3 (cassini): transmit queue 0 timed out
[ 8390.012566] Modules linked in: sit tunnel4 binfmt_misc ppdev vboxdrv kvm_amd kvm dm_crypt snd_hda_codec_realtek nfsd exportfs nfs lockd nfs_acl auth_rpcgss sunrpc snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss joydev snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi sctp snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device crc32c amd64_edac_mod snd soundcore bridge stp cassini snd_page_alloc wacom libcrc32c edac_core nvidia(P) psmouse sbp2 i2c_nforce2 k8temp shpchp edac_mce_amd serio_raw lp parport usbhid hid fbcon tileblit font bitblit softcursor ohci1394 vga16fb vgastate ieee1394 forcedeth
[ 8390.012661] Pid: 0, comm: swapper Tainted: P           2.6.32-16-generic #25-Ubuntu
[ 8390.012666] Call Trace:
[ 8390.012670]  <IRQ>  [<ffffffff81064f8b>] warn_slowpath_common+0x7b/0xc0
[ 8390.012688]  [<ffffffff81065031>] warn_slowpath_fmt+0x41/0x50
[ 8390.012695]  [<ffffffff8148bbc2>] dev_watchdog+0x262/0x270
[ 8390.012704]  [<ffffffff8101a183>] ? native_sched_clock+0x13/0x60
[ 8390.012714]  [<ffffffff81089445>] ? sched_clock_local+0x25/0x90
[ 8390.012720]  [<ffffffff8148b960>] ? dev_watchdog+0x0/0x270
[ 8390.012727]  [<ffffffff81075907>] run_timer_softirq+0x197/0x340
[ 8390.012736]  [<ffffffff810929e0>] ? tick_sched_timer+0x0/0xc0
[ 8390.012743]  [<ffffffff8108d743>] ? ktime_get+0x63/0xe0
[ 8390.012749]  [<ffffffff8106c637>] __do_softirq+0xb7/0x1e0
[ 8390.012756]  [<ffffffff810925ca>] ? tick_program_event+0x2a/0x30
[ 8390.012763]  [<ffffffff8101432c>] call_softirq+0x1c/0x30
[ 8390.012769]  [<ffffffff81015cf5>] do_softirq+0x65/0xa0
[ 8390.012774]  [<ffffffff8106c4d5>] irq_exit+0x85/0x90
[ 8390.012783]  [<ffffffff8155bf81>] smp_apic_timer_interrupt+0x71/0x9c
[ 8390.012789]  [<ffffffff81013cf3>] apic_timer_interrupt+0x13/0x20
[ 8390.012793]  <EOI>  [<ffffffff81038adb>] ? native_safe_halt+0xb/0x10
[ 8390.012806]  [<ffffffff8108d8c6>] ? ktime_get_real+0x16/0x50
[ 8390.012814]  [<ffffffff8130853f>] ? acpi_idle_do_entry+0x3e/0x67
[ 8390.012820]  [<ffffffff813085da>] ? acpi_idle_enter_c1+0x72/0xc1
[ 8390.012827]  [<ffffffff81559ab6>] ? notifier_call_chain+0x16/0x90
[ 8390.012835]  [<ffffffff8144dc3a>] ? menu_select+0x10a/0x2b0
[ 8390.012841]  [<ffffffff8144cb87>] ? cpuidle_idle_call+0xa7/0x140
[ 8390.012850]  [<ffffffff81011eb3>] ? cpu_idle+0xb3/0x110
[ 8390.012858]  [<ffffffff81550d59>] ? start_secondary+0xa8/0xaa
[ 8390.012863] ---[ end trace dcdbb9746a7e1964 ]---
[ 8390.012868] eth3: transmit timed out, resetting
[ 8390.012873] eth3: MIF_STATE[ffffffff]
[ 8390.012877] eth3: MAC_STATE[ffffffff]
[ 8390.012889] eth3: TX_STATE[ffffffff:ffffffff:ffffffff] FIFO[ffffffff:ffffffff:ffffffff] SM1[ffffffff] SM2[ffffffff]
[ 8390.012897] eth3: RX_STATE[ffffffff:ffffffff:ffffffff]
[ 8390.012904] eth3: HP_STATE[ffffffff:ffffffff:ffffffff:ffffffff]
[ 8390.022518] eth3: sw reset failed.
[ 8390.022518] eth3: mac tx[-1]/rx[-1] reset failed [ffffffff]
[ 8390.214731] eth3: mac tx[-1]/rx[-1] reset failed [ffffffff]
[ 8390.214731] eth3: PCS link down.
[ 8390.353644] br0: port 1(eth3) entering disabled state
[ 8392.212589] eth3: Link up at 1000 Mbps, full-duplex.
[ 8392.212597] eth3: Pause is enabled (rxfifo: 16384 off: 13312 on: 11776)
[ 8392.215006] br0: port 1(eth3) entering learning state
[ 8407.212524] br0: port 1(eth3) entering forwarding state


$ lspci -s 02:00.0 -vv
02:00.0 Ethernet controller: Sun Microsystems Computer Corp. Cassini 10/100/1000 (rev 20)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 18
	Region 0: [virtual] Memory at d0200000 (32-bit, non-prefetchable) [disabled] [size=2M]
	[virtual] Expansion ROM at d0400000 [disabled] [size=1M]
	Kernel driver in use: cassini
	Kernel modules: cassini

ProblemType: Bug
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
AplayDevices:
 **** List of PLAYBACK Hardware Devices ****
 card 0: NVidia [HDA NVidia], device 0: ALC883 Analog [ALC883 Analog]
   Subdevices: 1/1
   Subdevice #0: subdevice #0
Architecture: amd64
AudioDevicesInUse:
 USER        PID ACCESS COMMAND
 /dev/snd/controlC0:  dveeden    6462 F.... pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
 Card hw:0 'NVidia'/'HDA NVidia at 0xd0000000 irq 21'
   Mixer name	: 'Realtek ALC883'
   Components	: 'HDA:10ec0883,10ecc603,00100002'
   Controls      : 32
   Simple ctrls  : 20
Date: Tue Mar 23 19:56:25 2010
DistroRelease: Ubuntu 10.04
Frequency: Once a day.
HibernationDevice: RESUME=UUID=636bdb3f-aa4d-4f9b-820f-a40f4645d262
MachineType: Sun Microsystems Ultra20 M2
NonfreeKernelModules: nvidia
Package: linux-image-2.6.32-16-generic 2.6.32-16.25
ProcCmdLine: root=UUID=63168ebf-ab74-434a-8561-9a4b5a380a90 rootfstype=ext4 ro quiet splash
ProcEnviron:
 LANG=en_US.utf8
 SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.32-16.25-generic
Regression: Yes
RelatedPackageVersions: linux-firmware 1.33
Reproducible: No
RfKill:
 
SourcePackage: linux
TestedUpstream: No
Uname: Linux 2.6.32-16-generic x86_64
WpaSupplicantLog:
 
dmi.bios.date: 01/18/2008
dmi.bios.vendor: Sun Microsystems
dmi.bios.version: 1.52
dmi.board.name: Ultra20 M2
dmi.board.vendor: Sun Microsystems
dmi.board.version: 1.52
dmi.chassis.type: 17
dmi.chassis.vendor: Sun Microsystems
dmi.modalias: dmi:bvnSunMicrosystems:bvr1.52:bd01/18/2008:svnSunMicrosystems:pnUltra20M2:pvr1.52:rvnSunMicrosystems:rnUltra20M2:rvr1.52:cvnSunMicrosystems:ct17:cvr:
dmi.product.name: Ultra20 M2
dmi.product.version: 1.52
dmi.sys.vendor: Sun Microsystems

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: amd64 apport-bug lucid needs-upstream-testing regression-potential

-- 
2.6.32-16-generic: oops when using cassini ethernet adapter
https://bugs.launchpad.net/bugs/545334
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.

More information about the kernel-bugs mailing list