[Bug 536827] Re: drm boot error in lucid
Ritz
jonas at ritz.dk
Sun Mar 14 21:02:14 UTC 2010
I think it is a regression since Karmic. This bootlog is Linux ubuntu
2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686
GNU/Linux. Same eee 1000H, and still the same build in display.
When booting, Plymouth is also reported to be crashed in Lucid in maybe 1 out 5 times.
But append will not connect to database, so I can not make an automatic bugreport on that.
[ 0.201836] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7ec0000-0xf7efffff]
[ 0.201891] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7f80000-0xf7ffffff]
[ 0.202038] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7eb8000-0xf7ebbfff]
[ 0.202117] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.202125] pci 0000:00:1b.0: PME# disabled
[ 0.202235] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.202243] pci 0000:00:1c.0: PME# disabled
[ 0.202356] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.202364] pci 0000:00:1c.1: PME# disabled
[ 0.202478] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.202487] pci 0000:00:1c.3: PME# disabled
[ 0.202573] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f]
[ 0.202658] pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f]
[ 0.202743] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
[ 0.202828] pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f]
[ 0.202919] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7eb7c00-0xf7eb7fff]
[ 0.203003] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.203011] pci 0000:00:1d.7: PME# disabled
[ 0.203207] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.203216] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.203225] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003)
[ 0.203233] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.203242] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0003)
[ 0.203325] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.203338] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.203351] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.203363] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.203376] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
[ 0.203421] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.203429] pci 0000:00:1f.2: PME# disabled
[ 0.203615] pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
[ 0.203631] pci 0000:03:00.0: reg 18 io port: [0xec00-0xec7f]
[ 0.203726] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.203735] pci 0000:03:00.0: PME# disabled
[ 0.203829] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[ 0.203838] pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.203957] pci 0000:01:00.0: reg 10 64bit mmio: [0xfbefe000-0xfbefffff]
[ 0.204098] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.204109] pci 0000:01:00.0: PME# disabled
[ 0.204212] pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xfbefffff]
[ 0.204226] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
[ 0.204301] pci 0000:00:1e.0: transparent bridge
[ 0.204350] pci_bus 0000:00: on NUMA node 0
[ 0.204361] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.204698] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.204790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.224765] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.224998] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.225221] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.225442] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.225663] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.225885] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.226110] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.226333] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.226740] SCSI subsystem initialized
[ 0.228014] libata version 3.00 loaded.
[ 0.228141] usbcore: registered new interface driver usbfs
[ 0.228141] usbcore: registered new interface driver hub
[ 0.228142] usbcore: registered new device driver usb
[ 0.228160] ACPI: WMI: Mapper loaded
[ 0.228165] PCI: Using ACPI for IRQ routing
[ 0.236023] Bluetooth: Core ver 2.15
[ 0.236070] NET: Registered protocol family 31
[ 0.236070] Bluetooth: HCI device and connection manager initialized
[ 0.236070] Bluetooth: HCI socket layer initialized
[ 0.236070] NetLabel: Initializing
[ 0.236070] NetLabel: domain hash size = 128
[ 0.236070] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.236080] NetLabel: unlabeled traffic allowed by default
[ 0.236167] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.236179] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.253094] pnp: PnP ACPI init
[ 0.253135] ACPI: bus type pnp registered
[ 0.256939] pnp: PnP ACPI: found 13 devices
[ 0.256946] ACPI: ACPI bus type pnp unregistered
[ 0.256954] PnPBIOS: Disabled by ACPI PNP
[ 0.256978] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.256998] system 00:08: ioport range 0x25c-0x25f has been reserved
[ 0.257005] system 00:08: ioport range 0x380-0x383 has been reserved
[ 0.257013] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.257020] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.257027] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.257034] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.257042] system 00:08: iomem range 0x8c000000-0x8c01ffff has been reserved
[ 0.257050] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.257074] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.257081] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.257089] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.257097] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.257112] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.257119] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.257133] system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 0.257148] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.257155] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.257162] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.257169] system 00:0c: iomem range 0x100000-0x7f7fffff could not be reserved
[ 0.292031] AppArmor: AppArmor Filesystem Enabled
[ 0.292116] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.292121] pci 0000:00:1c.0: IO window: disabled
[ 0.292131] pci 0000:00:1c.0: MEM window: disabled
[ 0.292139] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.292148] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.292156] pci 0000:00:1c.1: IO window: 0xe000-0xefff
[ 0.292166] pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff
[ 0.292174] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.292183] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01
[ 0.292188] pci 0000:00:1c.3: IO window: disabled
[ 0.292198] pci 0000:00:1c.3: MEM window: 0xf8000000-0xfbefffff
[ 0.292208] pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f6ffffff
[ 0.292221] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.292226] pci 0000:00:1e.0: IO window: disabled
[ 0.292235] pci 0000:00:1e.0: MEM window: disabled
[ 0.292243] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.292267] alloc irq_desc for 16 on node -1
[ 0.292272] alloc kstat_irqs on node -1
[ 0.292286] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.292297] pci 0000:00:1c.0: setting latency timer to 64
[ 0.292312] alloc irq_desc for 17 on node -1
[ 0.292316] alloc kstat_irqs on node -1
[ 0.292325] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.292334] pci 0000:00:1c.1: setting latency timer to 64
[ 0.292348] alloc irq_desc for 19 on node -1
[ 0.292353] alloc kstat_irqs on node -1
[ 0.292361] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.292370] pci 0000:00:1c.3: setting latency timer to 64
[ 0.292383] pci 0000:00:1e.0: setting latency timer to 64
[ 0.292393] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.292399] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.292406] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.292413] pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.292419] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbefffff]
[ 0.292426] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf6ffffff]
[ 0.292432] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.292438] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.292512] NET: Registered protocol family 2
[ 0.292724] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.293397] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.294374] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.294828] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.294835] TCP reno registered
[ 0.295050] NET: Registered protocol family 1
[ 0.295196] Trying to unpack rootfs image as initramfs...
[ 0.501065] Switched to high resolution mode on CPU 1
[ 0.503974] Switched to high resolution mode on CPU 0
[ 3.315738] Freeing initrd memory: 5620k freed
[ 3.321472] cpufreq-nforce2: No nForce2 chipset.
[ 3.321538] Scanning for low memory corruption every 60 seconds
[ 3.321767] audit: initializing netlink socket (disabled)
[ 3.321796] type=2000 audit(1268599388.321:1): initialized
[ 3.339487] highmem bounce pool size: 64 pages
[ 3.339500] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 3.342844] VFS: Disk quotas dquot_6.5.2
[ 3.342978] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.344305] fuse init (API version 7.12)
[ 3.344502] msgmni has been set to 1706
[ 3.344966] alg: No test for stdrng (krng)
[ 3.345020] io scheduler noop registered
[ 3.345026] io scheduler anticipatory registered
[ 3.345030] io scheduler deadline registered
[ 3.345140] io scheduler cfq registered (default)
[ 3.345166] pci 0000:00:02.0: Boot video device
[ 3.345500] alloc irq_desc for 24 on node -1
[ 3.345506] alloc kstat_irqs on node -1
[ 3.345525] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 3.345543] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 3.345768] alloc irq_desc for 25 on node -1
[ 3.345773] alloc kstat_irqs on node -1
[ 3.345788] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 3.345805] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 3.346029] alloc irq_desc for 26 on node -1
[ 3.346034] alloc kstat_irqs on node -1
[ 3.346048] pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 3.346065] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 3.346240] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.346453] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.346715] ACPI: AC Adapter [AC0] (off-line)
[ 3.346854] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.346863] ACPI: Power Button [PWRF]
[ 3.346983] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 3.348159] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 3.360568] ACPI: Lid Switch [LID]
[ 3.360698] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 3.360706] ACPI: Sleep Button [SLPB]
[ 3.360798] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 3.360805] ACPI: Power Button [PWRB]
[ 3.362144] ACPI: SSDT 7f7ae180 0023C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 3.363134] ACPI: SSDT 7f7ae450 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 3.363862] Monitor-Mwait will be used to enter C-1 state
[ 3.363938] Monitor-Mwait will be used to enter C-2 state
[ 3.363998] Monitor-Mwait will be used to enter C-3 state
[ 3.364036] Marking TSC unstable due to TSC halts in idle
[ 3.364080] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 3.364140] processor LNXCPU:00: registered as cooling_device0
[ 3.364149] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 3.364881] ACPI: SSDT 7f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 3.365515] ACPI: SSDT 7f7ae3c0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 3.366500] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 3.366550] processor LNXCPU:01: registered as cooling_device1
[ 3.366560] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.389671] thermal LNXTHERM:01: registered as thermal_zone0
[ 3.389689] ACPI: Thermal Zone [TZ00] (44 C)
[ 3.389830] isapnp: Scanning for PnP cards...
[ 3.637874] ACPI: Battery Slot [BAT0] (battery present)
[ 3.744676] isapnp: No Plug & Play device found
[ 3.747520] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.750234] brd: module loaded
[ 3.751241] loop: module loaded
[ 3.751416] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 3.751650] ata_piix 0000:00:1f.2: version 2.13
[ 3.751682] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.751693] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 3.751762] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.751942] scsi0 : ata_piix
[ 3.752186] scsi1 : ata_piix
[ 3.755025] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 3.755033] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 3.756987] Fixed MDIO Bus: probed
[ 3.757081] PPP generic driver version 2.4.2
[ 3.757299] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.757344] alloc irq_desc for 23 on node -1
[ 3.757350] alloc kstat_irqs on node -1
[ 3.757364] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.757395] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.757403] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.757511] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.761430] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.761442] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.761471] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
[ 3.776033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.776222] usb usb1: configuration #1 chosen from 1 choice
[ 3.776288] hub 1-0:1.0: USB hub found
[ 3.776306] hub 1-0:1.0: 8 ports detected
[ 3.776463] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.776507] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.776583] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.776597] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.776605] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.776680] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.776720] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 3.776908] usb usb2: configuration #1 chosen from 1 choice
[ 3.776970] hub 2-0:1.0: USB hub found
[ 3.776985] hub 2-0:1.0: 2 ports detected
[ 3.777081] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.777093] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.777100] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.777172] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.777224] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 3.777391] usb usb3: configuration #1 chosen from 1 choice
[ 3.777451] hub 3-0:1.0: USB hub found
[ 3.777466] hub 3-0:1.0: 2 ports detected
[ 3.777558] alloc irq_desc for 18 on node -1
[ 3.777564] alloc kstat_irqs on node -1
[ 3.777576] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.777588] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.777595] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.777666] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.777715] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 3.777884] usb usb4: configuration #1 chosen from 1 choice
[ 3.777946] hub 4-0:1.0: USB hub found
[ 3.777961] hub 4-0:1.0: 2 ports detected
[ 3.778061] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 3.778073] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.778080] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.778151] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.778199] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 3.778373] usb usb5: configuration #1 chosen from 1 choice
[ 3.778435] hub 5-0:1.0: USB hub found
[ 3.778449] hub 5-0:1.0: 2 ports detected
[ 3.778650] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.809380] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.809395] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.809527] mice: PS/2 mouse device common for all mice
[ 3.809804] rtc_cmos 00:03: RTC can wake from S4
[ 3.809875] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.809920] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 3.810177] device-mapper: uevent: version 1.0.3
[ 3.811102] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[ 3.811309] device-mapper: multipath: version 1.1.0 loaded
[ 3.811316] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.811612] EISA: Probing bus 0 at eisa.0
[ 3.811655] EISA: Detected 0 cards.
[ 3.812078] cpuidle: using governor ladder
[ 3.812335] cpuidle: using governor menu
[ 3.813466] TCP cubic registered
[ 3.813854] NET: Registered protocol family 10
[ 3.814831] lo: Disabled Privacy Extensions
[ 3.815543] NET: Registered protocol family 17
[ 3.815589] Bluetooth: L2CAP ver 2.13
[ 3.815593] Bluetooth: L2CAP socket layer initialized
[ 3.815600] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.815604] Bluetooth: SCO socket layer initialized
[ 3.815733] Bluetooth: RFCOMM TTY layer initialized
[ 3.815740] Bluetooth: RFCOMM socket layer initialized
[ 3.815745] Bluetooth: RFCOMM ver 1.11
[ 3.816600] Using IPI No-Shortcut mode
[ 3.816771] PM: Resume from disk failed.
[ 3.816796] registered taskstats version 1
[ 3.817019] Magic number: 2:838:750
[ 3.817052] tty ttyS1: hash matches
[ 3.817159] rtc_cmos 00:03: setting system clock to 2010-03-14 20:43:10 UTC (1268599390)
[ 3.817168] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.817172] EDD information not available.
[ 3.835137] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 4.000135] Clocksource tsc unstable (delta = -161363254 ns)
[ 4.088183] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 4.170869] ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133
[ 4.170886] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.185143] ata1.00: configured for UDMA/133
[ 4.185481] scsi 0:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0 ANSI: 5
[ 4.185763] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.185875] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 4.186010] sd 0:0:0:0: [sda] Write Protect is off
[ 4.186017] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.186089] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.186434] sda: sda1 sda2 <
[ 4.229703] usb 1-2: configuration #1 chosen from 1 choice
[ 4.252205] sda5 >
[ 4.253608] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.253667] Freeing unused kernel memory: 540k freed
[ 4.254153] Write protecting the kernel text: 4568k
[ 4.254234] Write protecting the kernel read-only data: 1836k
[ 4.344098] usb 1-8: new high speed USB device using ehci_hcd and address 3
[ 4.588510] acpi device:1c: registered as cooling_device2
[ 4.588809] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/input/input6
[ 4.588912] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 4.615879] usb 1-8: configuration #1 chosen from 1 choice
[ 4.644948] Linux agpgart interface v0.103
[ 4.655918] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 4.656249] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 4.659108] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 4.813495] [drm] Initialized drm 1.1.0 20060810
[ 4.847434] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.847450] i915 0000:00:02.0: setting latency timer to 64
[ 4.855226] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.855253] ATL1E 0000:03:00.0: setting latency timer to 64
[ 4.871099] Initializing USB Mass Storage driver...
[ 4.871350] scsi2 : SCSI emulation for USB Mass Storage devices
[ 4.871585] usbcore: registered new interface driver usb-storage
[ 4.871594] USB Mass Storage support registered.
[ 4.871891] usb-storage: device found at 2
[ 4.871897] usb-storage: waiting for device to settle before scanning
[ 4.958859] integrated sync not supported
[ 5.077993] integrated sync not supported
[ 5.083244] [drm] fb0: inteldrmfb frame buffer device
[ 5.083261] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.410613] [drm] LVDS-8: set mode 1024x600 e
[ 5.815242] Console: switching to colour frame buffer device 128x37
[ 6.199389] xor: automatically using best checksumming function: pIII_sse
[ 6.216020] pIII_sse : 4785.000 MB/sec
[ 6.216029] xor: using function: pIII_sse (4785.000 MB/sec)
[ 6.222585] device-mapper: dm-raid45: initialized v0.2594b
[ 6.672308] EXT4-fs (sda1): barriers enabled
[ 6.703792] kjournald2 starting: pid 403, dev sda1:8, commit interval 5 seconds
[ 6.703833] EXT4-fs (sda1): delayed allocation enabled
[ 6.703841] EXT4-fs: file extents enabled
[ 6.720647] EXT4-fs: mballoc enabled
[ 6.720681] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 6.754635] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
[ 6.754644] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
[ 6.754650] EXT4-fs: mballoc: 0 generated and it took 0
[ 6.754655] EXT4-fs: mballoc: 0 preallocated, 0 discarded
[ 9.868568] usb-storage: device scan complete
[ 9.869832] scsi 2:0:0:0: Direct-Access silicon-power PMAP PQ: 0 ANSI: 0 CCS
[ 9.871154] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 9.871835] sd 2:0:0:0: [sdb] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 9.872593] sd 2:0:0:0: [sdb] Write Protect is off
[ 9.872607] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 9.872615] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 9.876134] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 9.876153] sdb: sdb1
[ 9.879088] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 9.879103] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 10.357368] aufs 2-standalone.tree-30-20090727
[ 10.389450] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 49.929138] Adding 7815580k swap on /dev/sda5. Priority:-1 extents:1 across:7815580k
[ 50.381314] udev: starting version 147
[ 50.640311] eeepc_laptop: Eee PC Hotkey Driver
[ 50.642013] eeepc_laptop: Hotkey init flags 0x41
[ 50.642731] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway
[ 50.651774] eeepc_laptop: PANELPOWER (4000000) not reported by BIOS, enabling anyway
[ 50.651792] eeepc_laptop: Get control methods supported: 0x6101713
[ 50.651956] input: Asus EeePC extra buttons as /devices/virtual/input/input7
[ 51.079332] cfg80211: Calling CRDA to update world regulatory domain
[ 51.152421] eeepc_laptop: Backlight controlled by ACPI video driver
[ 51.177809] intel_rng: FWH not detected
[ 51.554823] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[ 51.554833] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 51.554980] iwlagn 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 51.554997] iwlagn 0000:01:00.0: setting latency timer to 64
[ 51.555048] iwlagn 0000:01:00.0: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
[ 51.599672] iwlagn 0000:01:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 51.599761] alloc irq_desc for 27 on node -1
[ 51.599768] alloc kstat_irqs on node -1
[ 51.599803] iwlagn 0000:01:00.0: irq 27 for MSI/MSI-X
[ 51.636803] Linux video capture interface: v2.00
[ 51.679098] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (05e3:0505)
[ 51.712508] psmouse serio1: ID: 10 00 64
[ 51.824085] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input8
[ 51.824235] usbcore: registered new interface driver uvcvideo
[ 51.824245] USB Video Class driver (v0.1.0)
[ 51.884713] cfg80211: World regulatory domain updated:
[ 51.884725] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 51.884736] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 51.884745] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 51.884754] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 51.884764] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 51.884773] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 51.931616] elantech.c: assuming hardware version 2, firmware version 2.48
[ 51.978309] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 52.020331] elantech.c: Synaptics capabilities query result 0x00, 0x02, 0x64.
[ 52.030574] usplash[329]: segfault at b75d974c ip 001b5de6 sp bfb502f0 error 6 in libusplash.so.0 (deleted)[191000+29000]
[ 52.286270] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[ 52.429903] alloc irq_desc for 28 on node -1
[ 52.429918] alloc kstat_irqs on node -1
[ 52.429955] ATL1E 0000:03:00.0: irq 28 for MSI/MSI-X
[ 52.430794] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 52.840209] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 53.059387] iwlagn 0000:01:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 53.401650] iwlagn 0000:01:00.0: loaded firmware version 8.24.2.12
[ 53.583435] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 53.583488] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 53.602679] Registered led device: iwl-phy0::radio
[ 53.602725] Registered led device: iwl-phy0::assoc
[ 53.602767] Registered led device: iwl-phy0::RX
[ 53.602808] Registered led device: iwl-phy0::TX
[ 53.624991] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 53.778439] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 55.226952] integrated sync not supported
[ 55.414728] integrated sync not supported
[ 57.397994] lp: driver loaded but no devices found
[ 57.517953] ppdev: user-space parallel port driver
[ 60.585705] CPU0 attaching NULL sched-domain.
[ 60.585724] CPU1 attaching NULL sched-domain.
[ 60.601182] CPU0 attaching sched-domain:
[ 60.601195] domain 0: span 0-1 level SIBLING
[ 60.601204] groups: 0 1
[ 60.601217] domain 1: span 0-1 level MC
[ 60.601225] groups: 0-1 (__cpu_power = 2048)
[ 60.601242] CPU1 attaching sched-domain:
[ 60.601249] domain 0: span 0-1 level SIBLING
[ 60.601257] groups: 1 0
[ 60.601270] domain 1: span 0-1 level MC
[ 60.601277] groups: 0-1 (__cpu_power = 2048)
[ 64.192915] CPU0 attaching NULL sched-domain.
[ 64.192932] CPU1 attaching NULL sched-domain.
[ 64.205250] CPU0 attaching sched-domain:
[ 64.205263] domain 0: span 0-1 level SIBLING
[ 64.205272] groups: 0 1
[ 64.205285] domain 1: span 0-1 level MC
[ 64.205292] groups: 0-1 (__cpu_power = 2048)
[ 64.205308] CPU1 attaching sched-domain:
[ 64.205316] domain 0: span 0-1 level SIBLING
[ 64.205324] groups: 1 0
[ 64.205336] domain 1: span 0-1 level MC
[ 64.205344] groups: 0-1 (__cpu_power = 2048)
--
drm boot error in lucid
https://bugs.launchpad.net/bugs/536827
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.
More information about the kernel-bugs
mailing list