[Bug 589503] [NEW] package linux-image-2.6.32-22-generic 2.6.32-22.35 failed to install/upgrade: subprocess installed post-installation script returned error exit status 17

Democles nolan.bradshaw at gmx.com
Fri Jun 4 02:59:12 UTC 2010


Public bug reported:

Linux bradshaw-laptop 2.6.32-22-generic #35-Ubuntu SMP Tue Jun 1
14:17:36 UTC 2010 i686 GNU/Linux

Ubuntu 2.6.32-22.35-generic 2.6.32.11+drm33.2

00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information <?>
	Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port [8086:2591] (rev 03)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: ce000000-cfffffff
	Prefetchable memory behind bridge: b0000000-bfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [88] Subsystem: Toshiba America Info Systems Device [1179:0001]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
		Address: fee0100c  Data: 4161
	Capabilities: [a0] Express (v1) Root Port (Slot-), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [140] Root Complex Link <?>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: cdf00000-cdffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
			ExtTag+ RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
		Address: fee0100c  Data: 4169
	Capabilities: [90] Subsystem: Toshiba America Info Systems Device [1179:0001]
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [180] Root Complex Link <?>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: cdd00000-cdefffff
	Prefetchable memory behind bridge: 00000000afe00000-00000000afffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
			ExtTag+ RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
			Slot #  1, PowerLimit 6.500000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
		Address: fee0100c  Data: 4171
	Capabilities: [90] Subsystem: Toshiba America Info Systems Device [1179:0001]
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [180] Root Complex Link <?>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at afe0 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at af80 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 28c0 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at 28e0 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at 44000000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3) (prog-if 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=07, sec-latency=32
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: cdc00000-cdcfffff
	Prefetchable memory behind bridge: 0000000040000000-0000000043ffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [50] Subsystem: Toshiba America Info Systems Device [1179:0001]

00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
	Subsystem: Toshiba America Info Systems Device [1179:0247]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at 2000 [size=256]
	Region 1: I/O ports at 2880 [size=64]
	Region 2: Memory at 44000400 (32-bit, non-prefetchable) [size=512]
	Region 3: Memory at 44000600 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: Intel ICH
	Kernel modules: snd-intel8x0

00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller [8086:266d] (rev 03)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 20
	Region 0: I/O ports at 2400 [size=256]
	Region 1: I/O ports at 2800 [size=128]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel modules: snd-intel8x0m

00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel modules: iTCO_wdt, intel-rng

00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 03) (prog-if 80 [Master])
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at af50 [size=16]
	Capabilities: [70] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ata_piix
	Kernel modules: ahci

01:00.0 VGA compatible controller [0300]: nVidia Corporation NV43 [Geforce Go 6600TE/6200TE] [10de:0146] (rev a2)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at cf000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at ce000000 (64-bit, non-prefetchable) [size=16M]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [78] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [128] Power Budgeting <?>
	Kernel driver in use: nvidia
	Kernel modules: nvidia-current, nvidiafb, nouveau

02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 15)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at cdffc000 (64-bit, non-prefetchable) [size=16K]
	Region 2: I/O ports at ce00 [size=256]
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data <?>
	Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0100c  Data: 4199
	Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 2048 bytes
		DevSta:	CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 unlimited
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100] Advanced Error Reporting <?>
	Kernel driver in use: sky2
	Kernel modules: sky2

05:05.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
	Subsystem: Intel Corporation Device [8086:2741]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (750ns min, 6000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at cdcff000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Kernel driver in use: ipw2200
	Kernel modules: ipw2200

05:0b.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus Controller [104c:8031]
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at cdc04000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=05, secondary=06, subordinate=06, sec-latency=176
	Memory window 0: 40000000-43fff000 (prefetchable)
	Memory window 1: 48000000-4bfff000
	I/O window 0: 00001000-000010ff
	I/O window 1: 00001400-000014ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

05:0b.2 FireWire (IEEE 1394) [0c00]: Texas Instruments OHCI Compliant IEEE 1394 Host Controller [104c:8032] (prog-if 10)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 20
	Region 0: Memory at cdc05000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at cdc00000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
	Kernel driver in use: ohci1394
	Kernel modules: firewire-ohci, ohci1394

05:0b.4 SD Host controller [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller [104c:8034] (prog-if 01)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin D routed to IRQ 23
	Region 0: Memory at cdc05800 (32-bit, non-prefetchable) [size=256]
	Region 1: Memory at cdc05900 (32-bit, non-prefetchable) [size=256]
	Region 2: Memory at cdc05a00 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci-pci

0-0x7f), disabling
[    0.117357] pnp 00:09: io resource (0x50-0x53) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling
[    0.117361] pnp 00:09: io resource (0x63-0x63) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling
[    0.117364] pnp 00:09: io resource (0x65-0x65) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling
[    0.117368] pnp 00:09: io resource (0x72-0x77) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling
[    0.121675] pnp: PnP ACPI: found 14 devices
[    0.121678] ACPI: ACPI bus type pnp unregistered
[    0.121681] PnPBIOS: Disabled by ACPI PNP
[    0.121692] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.121696] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[    0.121699] system 00:00: iomem range 0x100000-0x3ffaffff could not be reserved
[    0.121702] system 00:00: iomem range 0x3ffb0000-0x3ffbffff could not be reserved
[    0.121706] system 00:00: iomem range 0x3ffc0000-0x3fffffff has been reserved
[    0.121709] system 00:00: iomem range 0xf0000000-0xf0003fff has been reserved
[    0.121712] system 00:00: iomem range 0xf0008000-0xf000bfff has been reserved
[    0.121715] system 00:00: iomem range 0xf0004000-0xf0004fff has been reserved
[    0.121718] system 00:00: iomem range 0xf0005000-0xf0005fff has been reserved
[    0.121721] system 00:00: iomem range 0xfeda0000-0xfedbffff has been reserved
[    0.121725] system 00:00: iomem range 0xfec00000-0xfec7ffff could not be reserved
[    0.121728] system 00:00: iomem range 0xfec80000-0xfecfffff has been reserved
[    0.121731] system 00:00: iomem range 0xfed13000-0xfed13fff has been reserved
[    0.121734] system 00:00: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.121737] system 00:00: iomem range 0xfee00000-0xfeefffff has been reserved
[    0.121740] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.121747] system 00:00: iomem range 0xffe80000-0xffffffff has been reserved
[    0.121753] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.121761] system 00:09: ioport range 0x480-0x48f has been reserved
[    0.121764] system 00:09: ioport range 0xe000-0xe07f has been reserved
[    0.121767] system 00:09: ioport range 0xe080-0xe0ff has been reserved
[    0.121770] system 00:09: ioport range 0xe400-0xe47f has been reserved
[    0.121773] system 00:09: ioport range 0xe480-0xe4ff has been reserved
[    0.121776] system 00:09: ioport range 0xe800-0xe87f has been reserved
[    0.121779] system 00:09: ioport range 0xe880-0xe8ff has been reserved
[    0.121782] system 00:09: ioport range 0xec00-0xec7f has been reserved
[    0.121785] system 00:09: ioport range 0xec80-0xecff has been reserved
[    0.121788] system 00:09: ioport range 0xd800-0xd87f has been reserved
[    0.121791] system 00:09: ioport range 0xd880-0xd89f has been reserved
[    0.121794] system 00:09: ioport range 0xeeb0-0xeebf has been reserved
[    0.121797] system 00:09: ioport range 0xeec0-0xeeff has been reserved
[    0.121800] system 00:09: ioport range 0x690-0x6ff has been reserved
[    0.121806] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[    0.156550] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xc0000000-0xbfffffff]
[    0.156554] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.156556] pci 0000:00:01.0:   IO window: disabled
[    0.156560] pci 0000:00:01.0:   MEM window: 0xce000000-0xcfffffff
[    0.156564] pci 0000:00:01.0:   PREFETCH window: 0xb0000000-0xbfffffff
[    0.156569] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.156573] pci 0000:00:1c.0:   IO window: 0xc000-0xcfff
[    0.156579] pci 0000:00:1c.0:   MEM window: 0xcdf00000-0xcdffffff
[    0.156584] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.156591] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.156595] pci 0000:00:1c.1:   IO window: 0xb000-0xbfff
[    0.156602] pci 0000:00:1c.1:   MEM window: 0xcdd00000-0xcdefffff
[    0.156607] pci 0000:00:1c.1:   PREFETCH window: 0x000000afe00000-0x000000afffffff
[    0.156639] pci 0000:05:0b.0: CardBus bridge, secondary bus 0000:06
[    0.156642] pci 0000:05:0b.0:   IO window: 0x001000-0x0010ff
[    0.156648] pci 0000:05:0b.0:   IO window: 0x001400-0x0014ff
[    0.156653] pci 0000:05:0b.0:   PREFETCH window: 0x40000000-0x43ffffff
[    0.156659] pci 0000:05:0b.0:   MEM window: 0x48000000-0x4bffffff
[    0.156665] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[    0.156669] pci 0000:00:1e.0:   IO window: 0x1000-0x1fff
[    0.156675] pci 0000:00:1e.0:   MEM window: 0xcdc00000-0xcdcfffff
[    0.156680] pci 0000:00:1e.0:   PREFETCH window: 0x40000000-0x43ffffff
[    0.156695]   alloc irq_desc for 16 on node -1
[    0.156698]   alloc kstat_irqs on node -1
[    0.156703] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.156708] pci 0000:00:01.0: setting latency timer to 64
[    0.156716]   alloc irq_desc for 17 on node -1
[    0.156718]   alloc kstat_irqs on node -1
[    0.156722] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.156727] pci 0000:00:1c.0: setting latency timer to 64
[    0.156736] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.156741] pci 0000:00:1c.1: setting latency timer to 64
[    0.156749] pci 0000:00:1e.0: setting latency timer to 64
[    0.156760] pci 0000:05:0b.0: enabling device (0000 -> 0003)
[    0.156765]   alloc irq_desc for 21 on node -1
[    0.156766]   alloc kstat_irqs on node -1
[    0.156770] pci 0000:05:0b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.156779] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.156781] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.156784] pci_bus 0000:01: resource 1 mem: [0xce000000-0xcfffffff]
[    0.156787] pci_bus 0000:01: resource 2 pref mem [0xb0000000-0xbfffffff]
[    0.156790] pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
[    0.156793] pci_bus 0000:02: resource 1 mem: [0xcdf00000-0xcdffffff]
[    0.156796] pci_bus 0000:03: resource 0 io:  [0xb000-0xbfff]
[    0.156798] pci_bus 0000:03: resource 1 mem: [0xcdd00000-0xcdefffff]
[    0.156801] pci_bus 0000:03: resource 2 pref mem [0xafe00000-0xafffffff]
[    0.156804] pci_bus 0000:05: resource 0 io:  [0x1000-0x1fff]
[    0.156807] pci_bus 0000:05: resource 1 mem: [0xcdc00000-0xcdcfffff]
[    0.156810] pci_bus 0000:05: resource 2 pref mem [0x40000000-0x43ffffff]
[    0.156813] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
[    0.156815] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[    0.156818] pci_bus 0000:06: resource 0 io:  [0x1000-0x10ff]
[    0.156821] pci_bus 0000:06: resource 1 io:  [0x1400-0x14ff]
[    0.156823] pci_bus 0000:06: resource 2 pref mem [0x40000000-0x43ffffff]
[    0.156826] pci_bus 0000:06: resource 3 mem: [0x48000000-0x4bffffff]
[    0.156858] NET: Registered protocol family 2
[    0.156941] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.157248] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.158137] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.158733] TCP: Hash tables configured (established 131072 bind 65536)
[    0.158737] TCP reno registered
[    0.158861] NET: Registered protocol family 1
[    0.158949] pci 0000:01:00.0: Boot video device
[    0.159068] Simple Boot Flag at 0x7c set to 0x1
[    0.159164] cpufreq-nforce2: No nForce2 chipset.
[    0.159194] Scanning for low memory corruption every 60 seconds
[    0.159332] audit: initializing netlink socket (disabled)
[    0.159350] type=2000 audit(1275598276.155:1): initialized
[    0.169774] Trying to unpack rootfs image as initramfs...
[    0.184117] highmem bounce pool size: 64 pages
[    0.184124] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.185698] VFS: Disk quotas dquot_6.5.2
[    0.185762] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.186362] fuse init (API version 7.13)
[    0.186448] msgmni has been set to 1716
[    0.192464] alg: No test for stdrng (krng)
[    0.192544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.192548] io scheduler noop registered
[    0.192550] io scheduler anticipatory registered
[    0.192552] io scheduler deadline registered
[    0.192594] io scheduler cfq registered (default)
[    0.192733]   alloc irq_desc for 24 on node -1
[    0.192736]   alloc kstat_irqs on node -1
[    0.192746] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.192752] pcieport 0000:00:01.0: setting latency timer to 64
[    0.192865]   alloc irq_desc for 25 on node -1
[    0.192867]   alloc kstat_irqs on node -1
[    0.192876] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.192886] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.193014]   alloc irq_desc for 26 on node -1
[    0.193016]   alloc kstat_irqs on node -1
[    0.193025] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.193034] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.193133] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.193189] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.193325] ACPI: AC Adapter [ADP1] (on-line)
[    0.193399] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.193440] ACPI: Lid Switch [LID]
[    0.193484] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.193490] ACPI: Power Button [PWRB]
[    0.193533] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.193536] ACPI: Power Button [PWRF]
[    0.193742] Marking TSC unstable due to TSC halts in idle
[    0.193790] processor LNXCPU:00: registered as cooling_device0
[    0.195962] thermal LNXTHERM:01: registered as thermal_zone0
[    0.195962] ACPI: Thermal Zone [THRM] (35 C)
[    0.198270] ACPI Warning for \_SB_.BAT1._BIF: Return Package type mismatch at index 12 - found Integer, expected String/Buffer (20090903/nspredef-1012)
[    0.198577] ACPI: Battery Slot [BAT1] (battery present)
[    0.198611] ACPI: Battery Slot [BAT2] (battery absent)
[    0.198620] isapnp: Scanning for PnP cards...
[    0.204132] Switching to clocksource hpet
[    0.204591] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.204709] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.205139] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.205262] serial 0000:00:1e.3: power state changed by ACPI to D0
[    0.205269] serial 0000:00:1e.3: enabling device (0000 -> 0001)
[    0.205276]   alloc irq_desc for 20 on node -1
[    0.205279]   alloc kstat_irqs on node -1
[    0.205285] serial 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    0.205290] serial 0000:00:1e.3: PCI INT B disabled
[    0.208770] brd: module loaded
[    0.209227] loop: module loaded
[    0.209317] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.209418] ata_piix 0000:00:1f.2: version 2.13
[    0.209434]   alloc irq_desc for 19 on node -1
[    0.209436]   alloc kstat_irqs on node -1
[    0.209442] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.209448] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    0.364071] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.368317] scsi0 : ata_piix
[    0.368471] scsi1 : ata_piix
[    0.369365] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xaf50 irq 14
[    0.369369] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xaf58 irq 15
[    0.369740] Fixed MDIO Bus: probed
[    0.369781] PPP generic driver version 2.4.2
[    0.369857] tun: Universal TUN/TAP device driver, 1.6
[    0.369859] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[    0.369955] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.369978] ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
[    0.369988]   alloc irq_desc for 23 on node -1
[    0.369990]   alloc kstat_irqs on node -1
[    0.369998] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.370020] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.370024] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.370057] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.370090] ehci_hcd 0000:00:1d.7: debug port 1
[    0.373966] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.376036] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x44000000
[    0.388184] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.388347] usb usb1: configuration #1 chosen from 1 choice
[    0.388379] hub 1-0:1.0: USB hub found
[    0.388393] hub 1-0:1.0: 8 ports detected
[    0.388470] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.388488] uhci_hcd: USB Universal Host Controller Interface driver
[    0.388545] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.388557] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.388561] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.388602] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.388631] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000afe0
[    0.388724] usb usb2: configuration #1 chosen from 1 choice
[    0.388749] hub 2-0:1.0: USB hub found
[    0.388759] hub 2-0:1.0: 2 ports detected
[    0.388802] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.388808] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.388812] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.388840] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.388876] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000af80
[    0.388961] usb usb3: configuration #1 chosen from 1 choice
[    0.388986] hub 3-0:1.0: USB hub found
[    0.388993] hub 3-0:1.0: 2 ports detected
[    0.389033] uhci_hcd 0000:00:1d.2: enabling device (0000 -> 0001)
[    0.389039]   alloc irq_desc for 18 on node -1
[    0.389041]   alloc kstat_irqs on node -1
[    0.389047] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.389055] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.389059] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.389096] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.389128] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000028c0
[    0.389219] usb usb4: configuration #1 chosen from 1 choice
[    0.389243] hub 4-0:1.0: USB hub found
[    0.389250] hub 4-0:1.0: 2 ports detected
[    0.389290] uhci_hcd 0000:00:1d.3: enabling device (0000 -> 0001)
[    0.389295] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.389303] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.389306] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.389337] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.389369] uhci_hcd 0000:00:1d.3: irq 16, io base 0x000028e0
[    0.389458] usb usb5: configuration #1 chosen from 1 choice
[    0.389482] hub 5-0:1.0: USB hub found
[    0.389489] hub 5-0:1.0: 2 ports detected
[    0.389597] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.400567] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.400581] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.400739] mice: PS/2 mouse device common for all mice
[    0.400949] rtc_cmos 00:08: RTC can wake from S4
[    0.400991] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    0.401022] rtc0: alarms up to one year, 114 bytes nvram, hpet irqs
[    0.401154] device-mapper: uevent: version 1.0.3
[    0.401277] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[    0.403022] device-mapper: multipath: version 1.1.0 loaded
[    0.403026] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.446736] EISA: Probing bus 0 at eisa.0
[    0.446743] Cannot allocate resource for EISA slot 1
[    0.446745] Cannot allocate resource for EISA slot 2
[    0.446768] EISA: Detected 0 cards.
[    0.451197] cpuidle: using governor ladder
[    0.451259] cpuidle: using governor menu
[    0.451706] TCP cubic registered
[    0.451868] NET: Registered protocol family 10
[    0.452435] lo: Disabled Privacy Extensions
[    0.452732] NET: Registered protocol family 17
[    0.452924] Using IPI No-Shortcut mode
[    0.453029] PM: Resume from disk failed.
[    0.453042] registered taskstats version 1
[    0.453425]   Magic number: 14:684:901
[    0.453536] rtc_cmos 00:08: setting system clock to 2010-06-03 20:51:16 UTC (1275598276)
[    0.453539] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.453541] EDD information not available.
[    0.458860] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.548938] ata2.00: ATAPI: DV-28E-N, 7.6A, max UDMA/33
[    0.549134] ata1.00: ATA-6: HTS726060M9AT00, MH4OA68A, max UDMA/100
[    0.549137] ata1.00: 117210240 sectors, multi 0: LBA48 
[    0.549150] ata1.00: applying bridge limits
[    0.564786] ata2.00: configured for UDMA/33
[    0.565388] ata1.00: configured for UDMA/100
[    0.648117] Freeing initrd memory: 7777k freed
[    0.785522] isapnp: No Plug & Play device found
[    0.785714] scsi 0:0:0:0: Direct-Access     ATA      HTS726060M9AT00  MH4O PQ: 0 ANSI: 5
[    0.785916] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.786129] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    0.786178] sd 0:0:0:0: [sda] Write Protect is off
[    0.786180] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.786205] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.786350]  sda:
[    0.789929] scsi 1:0:0:0: CD-ROM            TEAC     DV-28E-N         7.6A PQ: 0 ANSI: 5
[    0.799930] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[    0.799934] Uniform CD-ROM driver Revision: 3.20
[    0.800044] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.800095] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    0.806017]  sda1 sda2 < sda5 >
[    0.824986] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.825001] Freeing unused kernel memory: 656k freed
[    0.825426] Write protecting the kernel text: 4676k
[    0.825461] Write protecting the kernel read-only data: 1840k
[    0.841042] udev: starting version 151
[    0.961922] usb 2-1: new low speed USB device using uhci_hcd and address 2
[    1.067208] sky2 driver version 1.25
[    1.067258] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.067275] sky2 0000:02:00.0: setting latency timer to 64
[    1.067303] sky2 0000:02:00.0: Yukon-2 EC chip revision 1
[    1.067408]   alloc irq_desc for 27 on node -1
[    1.067410]   alloc kstat_irqs on node -1
[    1.067427] sky2 0000:02:00.0: irq 27 for MSI/MSI-X
[    1.074965] sky2 eth0: addr 00:0e:7b:59:33:dc
[    1.082247] ohci1394 0000:05:0b.2: enabling device (0000 -> 0002)
[    1.082256] ohci1394 0000:05:0b.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[    1.136063] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[cdc05000-cdc057ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    1.139782] usb 2-1: configuration #1 chosen from 1 choice
[    1.156581] usbcore: registered new interface driver hiddev
[    1.170085] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input5
[    1.170194] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1/input0
[    1.170221] usbcore: registered new interface driver usbhid
[    1.170224] usbhid: v2.6:USB HID core driver
[    1.204761] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    2.408161] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0000390000a542ef]
[   13.188982] udev: starting version 151
[   13.261846] Adding 2441840k swap on /dev/sda5.  Priority:-1 extents:1 across:2441840k 
[   13.363900] lp: driver loaded but no devices found
[   13.512057] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19-dev-acpikeys
[   13.512061] toshiba_acpi:     HCI method: \_SB_.VALZ.GHCI
[   13.512582] toshiba_acpi: Toshiba hotkeys are sent as ACPI events
[   13.512585] toshiba_acpi: ktoshkeyd will check 2 times per second
[   13.512696] vga16fb: initializing
[   13.512699] vga16fb: mapped to 0xc00a0000
[   13.512739] fb0: VGA16 VGA frame buffer device
[   13.512769] Linux agpgart interface v0.103
[   13.553404] toshiba_acpi: Dropped 0 keys from the queue on startup
[   13.616552] lib80211: common routines for IEEE802.11 drivers
[   13.616556] lib80211_crypt: registered algorithm 'NULL'
[   13.631042] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[   13.631345] acpi device:2b: registered as cooling_device1
[   13.631488] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/LNXVIDEO:00/input/input6
[   13.631551] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
[   13.633949] parport_pc 00:0d: activated
[   13.633953] parport_pc 00:0d: reported by Plug and Play ACPI
[   13.634016] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   13.658081] intel_rng: FWH not detected
[   13.744210] lp0: using parport0 (interrupt-driven).
[   13.796059] nvidia: module license 'NVIDIA' taints kernel.
[   13.796063] Disabling lock debugging due to kernel taint
[   14.913429] type=1505 audit(1275619890.958:2):  operation="profile_load" pid=612 name="/sbin/dhclient3"
[   14.914035] type=1505 audit(1275619890.958:3):  operation="profile_load" pid=612 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   14.914363] type=1505 audit(1275619890.958:4):  operation="profile_load" pid=612 name="/usr/lib/connman/scripts/dhclient-script"
[   15.209067] sdhci: Secure Digital Host Controller Interface driver
[   15.209072] sdhci: Copyright(c) Pierre Ossman
[   15.219297] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   15.219301] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
[   15.271096] yenta_cardbus 0000:05:0b.0: CardBus bridge found [1179:0001]
[   15.271121] yenta_cardbus 0000:05:0b.0: Enabling burst memory read transactions
[   15.271127] yenta_cardbus 0000:05:0b.0: Using CSCINT to route CSC interrupts to PCI
[   15.271129] yenta_cardbus 0000:05:0b.0: Routing CardBus interrupts to PCI
[   15.271136] yenta_cardbus 0000:05:0b.0: TI: mfunc 0x01aa1b02, devctl 0x64
[   15.271209] tpm_inf_pnp 00:0a: Found TPM with ID IFX0101
[   15.271256] tpm_inf_pnp 00:0a: TPM found: config base 0x4e, data base 0x680, chip version 0x0006, vendor id 0x15d1 (Infineon), product id 0x0006 (SLD 9630 TT 1.1)
[   15.272415] ppdev: user-space parallel port driver
[   15.290622] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   15.290626] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   15.651801] Intel ICH 0000:00:1e.2: power state changed by ACPI to D0
[   15.651810] Intel ICH 0000:00:1e.2: enabling device (0000 -> 0003)
[   15.651819] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   15.651845] Intel ICH 0000:00:1e.2: setting latency timer to 64
[   15.653593] nvidia 0000:01:00.0: power state changed by ACPI to D0
[   15.653605] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.653612] nvidia 0000:01:00.0: setting latency timer to 64
[   15.653617] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   15.654263] NVRM: loading NVIDIA UNIX x86 Kernel Module  195.36.15  Thu Mar 11 21:41:46 PST 2010
[   15.709718] yenta_cardbus 0000:05:0b.0: ISA IRQ mask 0x0c78, PCI irq 21
[   15.709722] yenta_cardbus 0000:05:0b.0: Socket status: 30000006
[   15.709732] yenta_cardbus 0000:05:0b.0: pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
[   15.709735] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x1000-0x1fff: clean.
[   15.709923] yenta_cardbus 0000:05:0b.0: pcmcia: parent PCI bridge Memory window: 0xcdc00000 - 0xcdcfffff
[   15.709926] yenta_cardbus 0000:05:0b.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
[   15.710719] sdhci-pci 0000:05:0b.4: SDHCI controller found [104c:8034] (rev 0)
[   15.710736] sdhci-pci 0000:05:0b.4: enabling device (0000 -> 0002)
[   15.710744] sdhci-pci 0000:05:0b.4: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[   15.710806] Registered led device: mmc0::
[   15.710841] mmc0: SDHCI controller on PCI [0000:05:0b.4] using DMA
[   15.710877] Registered led device: mmc1::
[   15.710899] mmc1: SDHCI controller on PCI [0000:05:0b.4] using DMA
[   15.710934] Registered led device: mmc2::
[   15.710956] mmc2: SDHCI controller on PCI [0000:05:0b.4] using DMA
[   15.711293]   alloc irq_desc for 22 on node -1
[   15.711295]   alloc kstat_irqs on node -1
[   15.711302] ipw2200 0000:05:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   15.716048] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   15.716104] ipw2200 0000:05:05.0: firmware: requesting ipw2200-bss.fw
[   15.733425] Console: switching to colour frame buffer device 80x30
[   16.053873] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   16.055532] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[   16.056272] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   16.056860] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   16.057604] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   16.078452] type=1505 audit(1275619892.122:5):  operation="profile_load" pid=771 name="/usr/share/gdm/guest-session/Xsession"
[   16.085664] type=1505 audit(1275619892.130:6):  operation="profile_replace" pid=773 name="/sbin/dhclient3"
[   16.087690] type=1505 audit(1275619892.130:7):  operation="profile_replace" pid=773 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   16.088275] type=1505 audit(1275619892.134:8):  operation="profile_replace" pid=773 name="/usr/lib/connman/scripts/dhclient-script"
[   16.092507] type=1505 audit(1275619892.138:9):  operation="profile_load" pid=774 name="/usr/bin/evince"
[   16.113496] type=1505 audit(1275619892.158:10):  operation="profile_load" pid=774 name="/usr/bin/evince-previewer"
[   16.128040] type=1505 audit(1275619892.174:11):  operation="profile_load" pid=774 name="/usr/bin/evince-thumbnailer"
[   16.136499] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7
[   16.156300] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[   16.165609] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8
[   16.592039] intel8x0_measure_ac97_clock: measured 55462 usecs (2672 samples)
[   16.592043] intel8x0: clocking to 48000
[   27.100022] eth1: no IPv6 routers present
[   53.425069] sky2 eth0: enabling interface
[   53.425672] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   59.005315] lib80211_crypt: registered algorithm 'WEP'

ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: linux-image-2.6.32-22-generic 2.6.32-22.35
Regression: No
Reproducible: Yes
ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2
Uname: Linux 2.6.32-22-generic i686
NonfreeKernelModules: nvidia
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
Architecture: i386
AudioDevicesInUse:
 USER        PID ACCESS COMMAND
 /dev/snd/controlC0:  bradshaw   1628 F.... pulseaudio
 /dev/snd/pcmC0D0p:   bradshaw   1628 F...m pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
 Card hw:0 'ICH6'/'Intel ICH6 with AD1981B at irq 17'
   Mixer name	: 'Analog Devices AD1981B'
   Components	: 'AC97a:41445374'
   Controls      : 28
   Simple ctrls  : 20
Date: Thu Jun  3 17:25:08 2010
ErrorMessage: subprocess installed post-installation script returned error exit status 17
HibernationDevice: RESUME=UUID=70e52e51-350f-4ede-8111-64987f97a263
InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5)
MachineType: TOSHIBA TECRA M3
PccardctlIdent:
 Socket 0:
   no product info available
PccardctlStatus:
 Socket 0:
   no card
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=fd20d66e-2a02-498c-b6c7-3af0ba843477 ro quiet splash
RelatedPackageVersions: linux-firmware 1.34
RfKill:
 
SourcePackage: linux
Title: package linux-image-2.6.32-22-generic 2.6.32-22.35 failed to install/upgrade: subprocess installed post-installation script returned error exit status 17
dmi.bios.date: 11/15/2005
dmi.bios.vendor: TOSHIBA
dmi.bios.version: Version 1.40
dmi.board.name: Portable PC
dmi.board.vendor: TOSHIBA
dmi.board.version: Version A0
dmi.chassis.asset.tag: 0000000000
dmi.chassis.type: 10
dmi.chassis.vendor: TOSHIBA
dmi.chassis.version: Version 1.0
dmi.modalias: dmi:bvnTOSHIBA:bvrVersion1.40:bd11/15/2005:svnTOSHIBA:pnTECRAM3:pvrPTM30U-18D017:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0:
dmi.product.name: TECRA M3
dmi.product.version: PTM30U-18D017
dmi.sys.vendor: TOSHIBA

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: apport-package filesystem i386 lucid needs-upstream-testing

-- 
package linux-image-2.6.32-22-generic 2.6.32-22.35 failed to install/upgrade: subprocess installed post-installation script returned error exit status 17
https://bugs.launchpad.net/bugs/589503
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.




More information about the kernel-bugs mailing list