[Bug 549559] Re: boot black screen

[durango]

Asus N61 JV Laptop

Boots normally with software raster glx support in a full lucid install
.

With jockey ( nvidia via package mananger ) or nvidia proprietory install the system boots 
to a black screen ,and another operating system must be used to revert to the original xorg config
or no config .

The nouveau module when loaded also produces amount of NAK's from what appears to be 
the unaddressed "behind " bus controller (primary  intel ) of the nvidia GPU .

Please see attached logs and lspci outputs .
 
 
 These ACPI commands work to switch the nvidia gt325m card on and off  are also some other 
commands which work but appear to have errors due to a behind main pci bus error
 ,ie GPU or bus controller not recognised .
 
 This error is apparent on kernel 2.6.3# compiled with debugging acpi and i2c bus ,even after 
modifying the i2c in arch and the nvidia i2c module.
 
 ACPI Commands that work :
 
  '\_SB.PCI0.GFX0.PRST'
  '\_SB.PCI0.PEGR.GFX0.PRST '
  '\_SB.PCI0.GFX0.CBLV'
  '\_SB.PCI0.GFX0.PRST'
  '\_SB.PCI0.PEGR.GFX0._ON'     "#Power GPU ON "
  '\_SB.PCI0.PEGR.GFX0._PS0'
  '\_SB.PCI0.LPCB.EC0.TSDS'
  '\_SB.PCI0.PEGR.GFX0._OFF'   "#-Powers GPU OFF"
  '\_SB.PCI0.PEGR.GFX0._ON'
  '\_SB.PCI0.LPCB.EC0.TSES'
  '\_SB.PCI0.GFX0.HLMX'
  '\_SB.PCI0.GFX0.HCMX'
  '\_SB.PCI0.GFX0.HCMM'
  '\_SB.PCI0.GFX0.HHMM'
  '\_SB.PCI0.GFX0.HLMX'
  '\_SB.PCI0.GFX0.HHMM)'
  '\_SB.PCI0.GFX0.HLMX)'
  '\_SB.PCI0.GFX0.HDMX)'
  '\_SB.PCI0.GFX0.HHMX)'
  '\_SB.PCI0.GFX0.HWHG' --------------------- semi works ,can cause full lockup like DDIS to switcheroo
  '\_SB.PCI0.GFX0.HDVG'   -------------------- successful but bus knocks back with i2c errors and AE_PARAMETERS not found .
  \_SB.PCI0.GFX0.HDVG' -----------------------see below  like running nvidia-smi -l ,the behind bus controller or nvidia controller  
     -----------------------------------------------------some acpi commands are recognised.
  '\_SB.PCI0.GFX0.HGAP'
 
 
  modprobe nouveau
 
  localhost kernel: VGA switcheroo: detected DSM switching method
  \_SB_.PCI0.PEGR.GFX0._DSM handle
  localhost kernel: PM: Adding info for No Bus:controlD65
  localhost kernel: PM: Adding info for No Bus:card1
  localhost kernel: [drm] nouveau 0000:01:00.0: Unsupported chipset
  0xffffffff
  localhost kernel: PM: Removing info for No Bus:card1
  localhost kernel: PM: Removing info for No Bus:controlD65
  localhost kernel: nouveau: probe of 0000:01:00.0 failed with error -22
  localhost kernel: i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  localhost kernel: i2c i2c-1: master_xfer[1] R, addr=0x50, len=128
  localhost kernel: i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  localhost kernel: i2c i2c-2: master_xfer[1] R, addr=0x50, len=128
  localhost kernel: i2c i2c-2: NAK from device addr 0x50 msg #0

Nvidia proprietary driver install produces this error when card access is attempted or
nvidia-settings or nvidia-smi -l is invoked .


after changing nv-reg.h with vbios off and re-compiling ,kernel boot param iommu=memaper

Jul  3 04:47:59 localhost kernel: nvidia 0000:01:00.0: irq 35 for MSI/MSI-X
Jul  3 04:47:59 localhost kernel: NVRM: failed to copy vbios to system memory.
Jul  3 04:47:59 localhost kernel: NVRM: RmInitAdapter failed! (0x30:0xffffffff:819)
Jul  3 04:47:59 localhost kernel: NVRM: rm_init_adapter(0) failed
 
Regards


** Attachment added: "lspci ,xorg ,syslog"
   http://launchpadlibrarian.net/51633029/lspci.txt.tar.gz

-- 
 boot black screen
https://bugs.launchpad.net/bugs/549559
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.