[Bug 309211] Re: Intel Gibabit Ethernet NIC (82541PI) operating at 100Mbps instead of 1000Mbps after upgrading to Hardy

[Thomas Antepoth]

Another Update:
This still occurres on a fresh lucid lynx either with the stock driver modules or the  CFLAGS_EXTRA-Settings.

root at sofa:~# ethtool -i eth0
driver: e1000
version: 8.0.19-NAPI
firmware-version: N/A
bus-info: 0000:05:00.0
root at sofa:~# 

The switch to which the NIC  is connected is a Linksys SD2005.

The errors on this NIC are:

root at sofa:~# ethtool -S eth0 | grep -v ": 0"
NIC statistics:
     rx_packets: 137916
     tx_packets: 125195
     rx_bytes: 198794208
     tx_bytes: 9016672
     rx_broadcast: 3
     tx_broadcast: 46
     tx_multicast: 25
     rx_errors: 16651
     rx_crc_errors: 9073
     rx_frame_errors: 48
     rx_align_errors: 48
     tx_tcp_seg_good: 8
     rx_long_byte_count: 198794208
     rx_csum_offload_good: 137686


Already tried an changed cables and tried to renegotiate via "ethtool -r eth0" but to no avail.

The NIC worked flawlessly during "Debian Lenny" and its stock kernel.

-- 
Intel Gibabit Ethernet NIC (82541PI) operating at 100Mbps instead of 1000Mbps after upgrading to Hardy
https://bugs.launchpad.net/bugs/309211
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.