[Bug 577058] Re: noisy fan after suspend to RAM

[Klaes]

If I boot the System with "GRUB_CMDLINE_LINUX_DEFAULT="quiet acpi_enforce_resources=lax", I'm able to run pwmconfig without the error message "/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed".
The fan is controlled by fancontrol even when the machine comes back from suspend.

With sensors-detect a winbond w83627hf was detected and I wrote it into /etc/modules
Now the output of sensors is:

privat at kubuntu:$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:       +29.0°C  (crit = +100.0°C)                  

w83627hf-isa-0290
Adapter: ISA adapter
in0:         +1.09 V  (min =  +0.00 V, max =  +4.08 V)   
in1:         +2.59 V  (min =  +0.00 V, max =  +4.08 V)   
in2:         +3.26 V  (min =  +2.82 V, max =  +3.79 V)   
in3:         +3.04 V  (min =  +1.52 V, max =  +2.03 V)   ALARM
in4:         +3.06 V  (min =  +3.98 V, max =  +2.00 V)   ALARM
in5:         +1.52 V  (min =  +3.02 V, max =  +3.52 V)   ALARM
in6:         +1.17 V  (min =  +1.95 V, max =  +0.50 V)   ALARM
in7:         +3.28 V  (min =  +3.55 V, max =  +4.08 V)   ALARM
in8:         +2.98 V  (min =  +2.03 V, max =  +4.08 V)   
fan1:        948 RPM  (min =  332 RPM, div = 16)
fan2:          0 RPM  (min =  332 RPM, div = 16)  ALARM
fan3:          0 RPM  (min =  332 RPM, div = 16)  ALARM
temp1:       +27.0°C  (high = +93.0°C, hyst = -69.0°C)  sensor = thermistor
temp2:       +29.0°C  (high = +50.0°C, hyst = +45.0°C)  sensor = diode
temp3:       +28.5°C  (high = +50.0°C, hyst = +45.0°C)  sensor = thermistor
cpu0_vid:   +0.000 V
beep_enable:enabled

-- 
noisy fan after suspend to RAM
https://bugs.launchpad.net/bugs/577058
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.