[Bug 556886] [NEW] WARNING: at /build/buildd/linux-2.6.32/kernel/power/suspend_test.c:53 suspend_test_finish+0x89/0x90()

Thomas Bousquet tomato1090 at hotmail.com
Tue Apr 6 22:09:05 UTC 2010


Public bug reported:

The bug appear when i make suspend with some softwares open (banshee, liferea, evolution, chromium). The bug appear only if i suspend the PC for a long time ( more than 2 hours i think ).
It tell me that there is a kernel bug, but i didn't notice  any bug, the PC still working fine without reboot.

Thx


~$  uname -a
Linux tom-laptop 2.6.32-19-generic #28-Ubuntu SMP Wed Mar 31 17:46:20 UTC 2010 i686 GNU/Linux


:~$ cat /proc/version_signature
Ubuntu 2.6.32-19.28-generic 2.6.32.10+drm33.1


dmesg:
[    0.925203] e100 0000:0a:08.0: PME# disabled
[    0.925987] e100: eth0: e100_probe: addr 0xd2005000, irq 20, MAC addr 00:13:a9:83:29:be
[    0.926028] ohci1394 0000:0a:03.1: enabling device (0000 -> 0002)
[    0.926036] ohci1394 0000:0a:03.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.980080] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[d2006000-d20067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    1.020055] usb 1-8: new high speed USB device using ehci_hcd and address 4
[    1.155663] usb 1-8: configuration #1 chosen from 1 choice
[    1.344058] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.345032] ata3.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[    1.392094] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    1.568909] usb 3-1: configuration #1 chosen from 1 choice
[    1.587322] usbcore: registered new interface driver hiddev
[    1.590136] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input4
[    1.590250] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
[    1.594943] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input5
[    1.595106] generic-usb 0003:046D:C526.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
[    1.595131] usbcore: registered new interface driver usbhid
[    1.595134] usbhid: v2.6:USB HID core driver
[    1.763988] ata3.00: ATA-7: TOSHIBA MK1234GSX, AH001A, max UDMA/100
[    1.763996] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.765595] ata3.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[    1.766858] ata3.00: configured for UDMA/100
[    1.780244] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5
[    1.780439] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.780626] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.780686] sd 2:0:0:0: [sda] Write Protect is off
[    1.780689] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.780720] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.780896]  sda:
[    1.812051] usb 4-1: new full speed USB device using uhci_hcd and address 2
[    1.817401]  sda1 sda2 < sda5 sda6 >
[    1.845195] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.982209] usb 4-1: configuration #1 chosen from 1 choice
[    1.990094] hub 4-1:1.0: USB hub found
[    1.991062] hub 4-1:1.0: 3 ports detected
[    2.252225] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[080046030241f3a9]
[    2.253276] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   13.038938] udev: starting version 151
[   13.158205] Adding 2441840k swap on /dev/sda5.  Priority:-1 extents:1 across:2441840k
[   13.165257] Linux agpgart interface v0.103
[   13.177618] lp: driver loaded but no devices found
[   13.244240] vga16fb: initializing
[   13.244244] vga16fb: mapped to 0xc00a0000
[   13.244312] fb0: VGA16 VGA frame buffer device
[   13.395161] nvidia: module license 'NVIDIA' taints kernel.
[   13.395166] Disabling lock debugging due to kernel taint
[   13.450660] type=1505 audit(1270534104.498:2):  operation="profile_load" pid=644 name="/sbin/dhclient3"
[   13.451488] type=1505 audit(1270534104.498:3):  operation="profile_load" pid=644 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   13.451937] type=1505 audit(1270534104.498:4):  operation="profile_load" pid=644 name="/usr/lib/connman/scripts/dhclient-script"
[   14.388169] cfg80211: Calling CRDA to update world regulatory domain
[   14.451172] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[   14.451176] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[   14.451254] iwl3945 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   14.451269] iwl3945 0000:06:00.0: setting latency timer to 64
[   14.507051] iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[   14.507055] iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   14.507172]   alloc irq_desc for 30 on node -1
[   14.507175]   alloc kstat_irqs on node -1
[   14.507210] iwl3945 0000:06:00.0: irq 30 for MSI/MSI-X
[   14.558290] yenta_cardbus 0000:0a:03.0: CardBus bridge found [104d:81fd]
[   14.558315] yenta_cardbus 0000:0a:03.0: Enabling burst memory read transactions
[   14.558321] yenta_cardbus 0000:0a:03.0: Using CSCINT to route CSC interrupts to PCI
[   14.558324] yenta_cardbus 0000:0a:03.0: Routing CardBus interrupts to PCI
[   14.558332] yenta_cardbus 0000:0a:03.0: TI: mfunc 0x011b1b22, devctl 0x64
[   14.624728] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   14.624744] nvidia 0000:01:00.0: setting latency timer to 64
[   14.624750] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   14.625681] NVRM: loading NVIDIA UNIX x86 Kernel Module  195.36.15  Thu Mar 11 21:41:46 PST 2010
[   14.625878] cfg80211: World regulatory domain updated:
[   14.625881] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.625885] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.625889] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.625892] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.625895] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.625898] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.626709] intel_rng: FWH not detected
[   14.635312] sony-laptop: Sony Notebook Control Driver v0.6.
[   14.650360] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:23/SNY5001:00/input/input6
[   14.650555] input: Sony Vaio Jogdial as /devices/virtual/input/input7
[   14.653139] Linux video capture interface: v2.00
[   14.663962] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1836)
[   14.664392] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[   14.664639] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[   14.664641] uvcvideo: Failed to initialize the device (-5).
[   14.664717] usbcore: registered new interface driver uvcvideo
[   14.665293] USB Video Class driver (v0.1.0)
[   14.705743] usbcam: registering driver r5u870 0.11.3
[   14.705772] r5u870-0: Detected Sony VGP-VCC4
[   14.705894] usb 1-8: firmware: requesting r5u870_1836.fw
[   14.746227]   alloc irq_desc for 22 on node -1
[   14.746230]   alloc kstat_irqs on node -1
[   14.746244] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   14.746313] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   14.751908] phy0: Selected rate control algorithm 'iwl-3945-rs'
[   14.827596] r5u870-0: registered as video0
[   14.827624] usbcore: registered new interface driver r5u870
[   14.852931] yenta_cardbus 0000:0a:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
[   14.852936] yenta_cardbus 0000:0a:03.0: Socket status: 30000006
[   14.852941] pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[   14.852951] yenta_cardbus 0000:0a:03.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
[   14.852955] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x6000-0x6fff: clean.
[   14.853240] yenta_cardbus 0000:0a:03.0: pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff
[   14.853244] yenta_cardbus 0000:0a:03.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
[   14.853998] tifm_7xx1 0000:0a:03.2: enabling device (0000 -> 0002)
[   14.854008] tifm_7xx1 0000:0a:03.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   14.889728] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   14.889990] input: HDA Intel HP Out at Sep Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   14.890234] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   14.916684] Console: switching to colour frame buffer device 80x30
[   14.930712] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input11
[   14.949256] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input12
[   15.179958] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   15.182039] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   15.182908] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   15.183631] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   15.184571] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   29.949402] EXT4-fs (sda6): mounted filesystem with ordered data mode
[   30.040632] type=1505 audit(1270534121.089:5):  operation="profile_load" pid=884 name="/usr/share/gdm/guest-session/Xsession"
[   30.043170] type=1505 audit(1270534121.089:6):  operation="profile_replace" pid=885 name="/sbin/dhclient3"
[   30.044022] type=1505 audit(1270534121.093:7):  operation="profile_replace" pid=885 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   30.044623] type=1505 audit(1270534121.093:8):  operation="profile_replace" pid=885 name="/usr/lib/connman/scripts/dhclient-script"
[   30.044743] iwl3945 0000:06:00.0: firmware: requesting iwlwifi-3945-2.ucode
[   30.052979] type=1505 audit(1270534121.101:9):  operation="profile_load" pid=887 name="/usr/bin/evince"
[   30.054129] iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
[   30.073793] type=1505 audit(1270534121.121:10):  operation="profile_load" pid=887 name="/usr/bin/evince-previewer"
[   30.080402] type=1505 audit(1270534121.129:11):  operation="profile_load" pid=887 name="/usr/bin/evince-thumbnailer"
[   30.090122] type=1505 audit(1270534121.137:12):  operation="profile_load" pid=957 name="/usr/lib/cups/backend/cups-pdf"
[   30.091127] type=1505 audit(1270534121.137:13):  operation="profile_load" pid=957 name="/usr/sbin/cupsd"
[   30.094634] type=1505 audit(1270534121.141:14):  operation="profile_load" pid=958 name="/usr/sbin/tcpdump"
[   30.126211] Registered led device: iwl-phy0::radio
[   30.126565] Registered led device: iwl-phy0::assoc
[   30.126812] Registered led device: iwl-phy0::RX
[   30.127047] Registered led device: iwl-phy0::TX
[   30.136987] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   30.154017] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   30.676050] ppdev: user-space parallel port driver
[ 4982.499474] wlan0: deauthenticating from 00:1b:2f:e6:14:d0 by local choice (reason=3)
[ 4982.502213] wlan0: direct probe to AP 00:1b:2f:e6:14:d0 (try 1)
[ 4982.504397] wlan0: direct probe responded
[ 4982.504405] wlan0: authenticate with AP 00:1b:2f:e6:14:d0 (try 1)
[ 4982.506379] wlan0: authenticated
[ 4982.506410] wlan0: associate with AP 00:1b:2f:e6:14:d0 (try 1)
[ 4982.508577] wlan0: RX AssocResp from 00:1b:2f:e6:14:d0 (capab=0x431 status=0 aid=1)
[ 4982.508582] wlan0: associated
[ 4982.510257] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4992.884029] wlan0: no IPv6 routers present
[10977.429614] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[11312.393066] CE: hpet increasing min_delta_ns to 15000 nsec
[11477.321035] CE: hpet increasing min_delta_ns to 22500 nsec
[17906.564590] CE: hpet increasing min_delta_ns to 33750 nsec
[23328.000022] NOHZ: local_softirq_pending 100
[30232.581053] wlan0: deauthenticating from 00:1b:2f:e6:14:d0 by local choice (reason=3)
[30234.156339] PM: Syncing filesystems ... done.
[30234.208048] PM: Preparing system for mem sleep
[30234.208055] Freezing user space processes ... (elapsed 0.00 seconds) done.
[30234.209363] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[30234.209442] PM: Entering mem sleep
[30234.209455] Suspending console(s) (use no_console_suspend to debug)
[30234.248144] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[30234.248243] sd 2:0:0:0: [sda] Stopping disk
[30234.657826] PM: suspend of drv:sd dev:2:0:0:0 complete after 409.686 msecs
[30235.099082] PM: suspend of drv:psmouse dev:serio4 complete after 406.913 msecs
[30235.197838] ACPI handle has no context!
[30235.197922] e100 0000:0a:08.0: PCI INT A disabled
[30235.197930] e100 0000:0a:08.0: PME# enabled
[30235.197938] e100 0000:0a:08.0: wake-up capability enabled by ACPI
[30235.212108] ACPI handle has no context!
[30235.212118] tifm_7xx1 0000:0a:03.2: PCI INT B disabled
[30235.212128] ACPI handle has no context!
[30235.228135] ACPI handle has no context!
[30237.136339] PM: suspend of drv:nvidia dev:0000:01:00.0 complete after 1876.238 msecs
[30237.168153] ata2: port disabled. ignoring.
[30237.168253] ata_piix 0000:00:1f.1: PCI INT A disabled
[30237.168277] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[30237.168302] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[30237.168312] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[30237.168322] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[30237.168333] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[30237.376121] HDA Intel 0000:00:1b.0: PCI INT A disabled
[30237.392046] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 223.687 msecs
[30237.392327] PM: suspend of devices complete after 3182.459 msecs
[30237.392331] PM: suspend devices took 3.184 seconds
[30237.408268] PM: late suspend of devices complete after 15.932 msecs
[30237.408623] ACPI: Preparing to enter system sleep state S3
[30237.424014] Disabling non-boot CPUs ...
[30237.424038] CPU0 attaching NULL sched-domain.
[30237.424042] CPU1 attaching NULL sched-domain.
[30237.488017] CPU0 attaching NULL sched-domain.
[30237.489153] Breaking affinity for irq 9
[30237.489174] Breaking affinity for irq 16
[30237.489186] Breaking affinity for irq 20
[30237.489194] Breaking affinity for irq 22
[30237.592022] CPU 1 is now offline
[30237.592026] SMP alternatives: switching to UP code
[30237.599405] Back to C!
[30237.599405] CPU0: Thermal monitoring enabled (TM2)
[30237.599405] Enabling non-boot CPUs ...
[30237.599405] SMP alternatives: switching to SMP code
[30237.606351] Booting processor 1 APIC 0x1 ip 0x6000
[30237.598976] Initializing CPU#1
[30237.598976] CPU: L1 I cache: 32K, L1 D cache: 32K
[30237.598976] CPU: L2 cache: 2048K
[30237.598976] CPU: Physical Processor ID: 0
[30237.598976] CPU: Processor Core ID: 1
[30237.598976] CPU1: Thermal monitoring enabled (TM2)
[30237.696111] CPU1: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
[30237.696189] CPU0 attaching NULL sched-domain.
[30237.724019] CPU0 attaching sched-domain:
[30237.724023]  domain 0: span 0-1 level MC
[30237.724025]   groups: 0 1
[30237.724031] CPU1 attaching sched-domain:
[30237.724033]  domain 0: span 0-1 level MC
[30237.724035]   groups: 1 0
[30237.724538] CPU1 is up
[30237.725031] ACPI: Waking up from system sleep state S3
[30237.772264] pcieport 0000:00:01.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
[30237.772274] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[30237.772338] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[30237.772375] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x40103)
[30237.772390] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xc1f1c001)
[30237.772396] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xc9f0c800)
[30237.772402] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
[30237.772408] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x30200)
[30237.772417] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[30237.772424] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[30237.772479] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40207)
[30237.772493] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xc3f1c201)
[30237.772499] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xcbf0ca00)
[30237.772505] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
[30237.772516] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[30237.772524] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[30237.772578] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x4030b)
[30237.772593] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xc5f1c401)
[30237.772599] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xcdf0cc00)
[30237.772605] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040)
[30237.772615] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[30237.772623] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[30237.772678] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040a)
[30237.772692] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xc7f1c601)
[30237.772698] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xcff0ce00)
[30237.772704] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050)
[30237.772710] pcieport 0000:00:1c.3: restoring config space at offset 0x6 (was 0x0, writing 0x90800)
[30237.772719] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[30237.772726] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[30237.772792] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[30237.772829] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[30237.772865] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[30237.772901] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[30237.772947] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[30237.772984] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x83f18001)
[30237.772994] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x200a0a00, writing 0x200e0a00)
[30237.773010] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100007)
[30237.773103] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[30237.773149] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[30237.773259] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0)
[30237.773449] iwl3945 0000:06:00.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100406)
[30237.773580] yenta_cardbus 0000:0a:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c001ff)
[30237.773587] yenta_cardbus 0000:0a:03.0: restoring config space at offset 0xe (was 0x0, writing 0x68fc)
[30237.773593] yenta_cardbus 0000:0a:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6800)
[30237.773600] yenta_cardbus 0000:0a:03.0: restoring config space at offset 0xc (was 0x0, writing 0x64fc)
[30237.773607] yenta_cardbus 0000:0a:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6400)
[30237.773614] yenta_cardbus 0000:0a:03.0: restoring config space at offset 0xa (was 0x0, writing 0x87fff000)
[30237.773621] yenta_cardbus 0000:0a:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x84000000)
[30237.773628] yenta_cardbus 0000:0a:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x83fff000)
[30237.773635] yenta_cardbus 0000:0a:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x80000000)
[30237.773642] yenta_cardbus 0000:0a:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00e0b0a)
[30237.773651] yenta_cardbus 0000:0a:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xd2007000)
[30237.773658] yenta_cardbus 0000:0a:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a808)
[30237.773875] ohci1394 0000:0a:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[30237.773884] ohci1394 0000:0a:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[30237.773935] tifm_7xx1 0000:0a:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[30237.773944] tifm_7xx1 0000:0a:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[30237.773990] e100 0000:0a:08.0: restoring config space at offset 0x3 (was 0x0, writing 0x4010)
[30237.773997] e100 0000:0a:08.0: restoring config space at offset 0x1 (was 0x2900003, writing 0x2900007)
[30237.774409] PM: early resume of devices complete after 2.289 msecs
[30237.823075] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[30237.823087] HDA Intel 0000:00:1b.0: setting latency timer to 64
[30237.823146] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[30237.823156] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[30237.823188] usb usb2: root hub lost power or was reset
[30237.823214] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[30237.823224] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[30237.823263] usb usb3: root hub lost power or was reset
[30237.823298] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[30237.823305] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[30237.823331] usb usb4: root hub lost power or was reset
[30237.823374] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[30237.823381] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[30237.823407] usb usb5: root hub lost power or was reset
[30237.823428] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[30237.823436] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[30237.823479] pci 0000:00:1e.0: setting latency timer to 64
[30237.823493] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[30237.823498] ata_piix 0000:00:1f.1: setting latency timer to 64
[30237.824520] ata2: port disabled. ignoring.
[30237.824537] ahci 0000:00:1f.2: setting latency timer to 64
[30238.414387] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[30238.414392] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[30238.751158] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 926.548 msecs
[30238.772513] ata1.00: configured for UDMA/33
[30238.888047] PM: resume of drv:yenta_cardbus dev:0000:0a:03.0 complete after 136.814 msecs
[30238.944075] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[d2006000-d20067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[30238.944256] tifm_7xx1 0000:0a:03.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[30238.944303] e100 0000:0a:08.0: wake-up capability disabled by ACPI
[30238.944309] e100 0000:0a:08.0: PME# disabled
[30239.100047] PM: resume of drv:usb dev:usb1 complete after 155.225 msecs
[30239.140059] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[30239.141467] ata3.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[30239.144238] ata3.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[30239.145489] ata3.00: configured for UDMA/100
[30239.348056] PM: resume of drv:usb dev:usb3 complete after 247.971 msecs
[30239.464049] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[30239.599504] r5u870 1-8:1.0: no reset_resume for driver r5u870?
[30239.599509] r5u870 1-8:1.1: no reset_resume for driver r5u870?
[30239.599654] PM: resume of drv:usb dev:1-8 complete after 245.834 msecs
[30239.708047] usb 3-1: reset full speed USB device using uhci_hcd and address 2
[30239.861088] PM: resume of drv:usb dev:3-1 complete after 261.416 msecs
[30239.861147] sd 2:0:0:0: [sda] Starting disk
[30239.867832] PM: resume of devices complete after 2093.321 msecs
[30239.867907] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1836)
[30239.868126] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[30239.868378] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[30239.868382] uvcvideo: Failed to initialize the device (-5).
[30239.868415] r5u870-0: Detected Sony VGP-VCC4
[30239.868624] usb 1-8: firmware: requesting r5u870_1836.fw
[30299.868080] r5u870-0: Microcode file "r5u870_1836.fw" is missing
[30299.868085] r5u870-0: Please see http://wiki.mediati.org/r5u870/Microcode
[30299.868089] r5u870-0: initialization failed: -2
[30299.868101] r5u870: probe of 1-8:1.0 failed with error -2
[30299.868387] PM: resume devices took 62.096 seconds
[30299.868389] ------------[ cut here ]------------
[30299.868396] WARNING: at /build/buildd/linux-2.6.32/kernel/power/suspend_test.c:53 suspend_test_finish+0x89/0x90()
[30299.868399] Hardware name: VGN-AR31E
[30299.868401] Component: resume devices, time: 62096
[30299.868403] Modules linked in: binfmt_misc ppdev pcmcia snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm r5u870 usbcam videobuf_dma_sg videobuf_core arc4 uvcvideo snd_seq_dummy fbcon tileblit font bitblit softcursor videodev v4l1_compat sony_laptop tifm_7xx1 tifm_core snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd yenta_socket rsrc_nonstatic joydev pcmcia_core soundcore video output iwl3945 iwlcore psmouse serio_raw mac80211 led_class cfg80211 nvidia(P) vga16fb vgastate intel_agp snd_page_alloc agpgart lp parport usbhid hid ohci1394 ieee1394 e100 mii ahci
[30299.868458] Pid: 4951, comm: pm-suspend Tainted: P           2.6.32-19-generic #28-Ubuntu
[30299.868460] Call Trace:
[30299.868466]  [<c014c342>] warn_slowpath_common+0x72/0xa0
[30299.868471]  [<c0183929>] ? suspend_test_finish+0x89/0x90
[30299.868475]  [<c0183929>] ? suspend_test_finish+0x89/0x90
[30299.868479]  [<c014c3bb>] warn_slowpath_fmt+0x2b/0x30
[30299.868483]  [<c0183929>] suspend_test_finish+0x89/0x90
[30299.868487]  [<c0183701>] suspend_devices_and_enter+0xa1/0xd0
[30299.868492]  [<c0588673>] ? printk+0x1d/0x22
[30299.868496]  [<c01837ed>] enter_state+0xbd/0xf0
[30299.868500]  [<c0182ea5>] state_store+0x75/0xc0
[30299.868504]  [<c0182e30>] ? state_store+0x0/0xc0
[30299.868508]  [<c034b180>] kobj_attr_store+0x20/0x30
[30299.868513]  [<c025da15>] sysfs_write_file+0x95/0x100
[30299.868518]  [<c0207932>] vfs_write+0xa2/0x1a0
[30299.868521]  [<c025d980>] ? sysfs_write_file+0x0/0x100
[30299.868526]  [<c058d210>] ? do_page_fault+0x160/0x3a0
[30299.868529]  [<c0208252>] sys_write+0x42/0x70
[30299.868533]  [<c01033ec>] syscall_call+0x7/0xb
[30299.868536] ---[ end trace 63618f47599e239b ]---
[30299.868590] PM: Finishing wakeup.
[30299.868593] Restarting tasks ... done.
[30300.317019] usb 4-1: reset full speed USB device using uhci_hcd and address 2
[30302.157393] Registered led device: iwl-phy0::radio
[30302.158453] Registered led device: iwl-phy0::assoc
[30302.159174] Registered led device: iwl-phy0::RX
[30302.161593] Registered led device: iwl-phy0::TX
[30302.172811] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[30302.190306] ADDRCONF(NETDEV_UP): eth0: link is not ready
[30304.796546] wlan0: deauthenticating from 00:1b:2f:e6:14:d0 by local choice (reason=3)
[30304.832785] wlan0: direct probe to AP 00:1b:2f:e6:14:d0 (try 1)
[30304.835015] wlan0: direct probe responded
[30304.835023] wlan0: authenticate with AP 00:1b:2f:e6:14:d0 (try 1)
[30304.837024] wlan0: authenticated
[30304.837056] wlan0: associate with AP 00:1b:2f:e6:14:d0 (try 1)
[30304.839570] wlan0: RX AssocResp from 00:1b:2f:e6:14:d0 (capab=0x431 status=0 aid=3)
[30304.839577] wlan0: associated
[30304.842337] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[30315.244035] wlan0: no IPv6 routers present

ProblemType: KernelOops
DistroRelease: Ubuntu 10.04
Package: linux-image-2.6.32-19-generic 2.6.32-19.28
Regression: Yes
Reproducible: Yes
ProcVersionSignature: Ubuntu 2.6.32-19.28-generic 2.6.32.10+drm33.1
Uname: Linux 2.6.32-19-generic i686
NonfreeKernelModules: nvidia
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
Annotation: Your system might become unstable now and might need to be restarted.
Architecture: i386
ArecordDevices:
 **** List of CAPTURE Hardware Devices ****
 card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
   Subdevices: 1/1
   Subdevice #0: subdevice #0
AudioDevicesInUse:
 USER        PID ACCESS COMMAND
 /dev/snd/controlC0:  tom        1447 F.... pulseaudio
 /dev/snd/pcmC0D0p:   tom        1447 F...m pulseaudio
CRDA: Error: [Errno 2] Aucun fichier ou dossier de ce type
Card0.Amixer.info:
 Card hw:0 'Intel'/'HDA Intel at 0xd2300000 irq 22'
   Mixer name	: 'SigmaTel CXD9872AKD'
   Components	: 'HDA:83847664,104d1300,00100201 HDA:14f12bfa,104d0200,00090000'
   Controls      : 18
   Simple ctrls  : 10
Date: Tue Apr  6 23:50:02 2010
Failure: oops
HibernationDevice: RESUME=UUID=40815f7e-16ec-49f1-914a-c270ef96255f
InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Beta i386 (20100318)
MachineType: Sony Corporation VGN-AR31E
PccardctlIdent:
 Socket 0:
   no product info available
PccardctlStatus:
 Socket 0:
   no card
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-19-generic root=UUID=6200b214-9ac1-44ec-95cd-5e4bb7d87998 ro quiet splash
RelatedPackageVersions: linux-firmware 1.33
RfKill:
 0: phy0: Wireless LAN
  Soft blocked: no
  Hard blocked: no
SourcePackage: linux
Title: WARNING: at /build/buildd/linux-2.6.32/kernel/power/suspend_test.c:53 suspend_test_finish+0x89/0x90()
dmi.bios.date: 12/15/2006
dmi.bios.vendor: Phoenix Technologies LTD
dmi.bios.version: R0190J6
dmi.board.asset.tag: Reserved
dmi.board.name: VAIO
dmi.board.vendor: Sony Corporation
dmi.board.version: Reserved
dmi.chassis.asset.tag: N/A
dmi.chassis.type: 10
dmi.chassis.vendor: Sony Corporation
dmi.chassis.version: N/A
dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvrR0190J6:bd12/15/2006:svnSonyCorporation:pnVGN-AR31E:pvrC3LNHWYY:rvnSonyCorporation:rnVAIO:rvrReserved:cvnSonyCorporation:ct10:cvrN/A:
dmi.product.name: VGN-AR31E
dmi.product.version: C3LNHWYY
dmi.sys.vendor: Sony Corporation

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: apport-kerneloops i386 kernel-oops lucid needs-upstream-testing regression-update resume suspend

-- 
WARNING: at /build/buildd/linux-2.6.32/kernel/power/suspend_test.c:53 suspend_test_finish+0x89/0x90()
https://bugs.launchpad.net/bugs/556886
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.




More information about the kernel-bugs mailing list