[Bug 446146] Re: Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update related)

[Papamatti]

I have discoverd that i have a huawei e160 (Medion Mobile S4011 Web
Stick) instead of an e220/e270.

Lsusb shows :

Bus 002 Device 006: ID 12d1:1003 Huawei Technologies Co., Ltd. E220
HSDPA Modem / E270 HSDPA/HSUPA Modem

dmesg shows:
[   76.622509] usb 2-4: new high speed USB device using ehci_hcd and address 5
[   76.832581] usb 2-4: configuration #1 chosen from 1 choice
[   76.861526] scsi8 : SCSI emulation for USB Mass Storage devices
[   76.872533] usb-storage: device found at 5
[   76.872533] usb-storage: waiting for device to settle before scanning
[   76.872575] usb 2-4: USB disconnect, address 5
[   84.132515] usb 2-4: new high speed USB device using ehci_hcd and address 6
[   84.293917] usb 2-4: configuration #1 chosen from 1 choice
[   84.313787] scsi11 : SCSI emulation for USB Mass Storage devices
[   84.320206] usb-storage: device found at 6
[   84.320208] usb-storage: waiting for device to settle before scanning
[   84.330022] scsi12 : SCSI emulation for USB Mass Storage devices
[   84.341268] usb-storage: device found at 6
[   84.341270] usb-storage: waiting for device to settle before scanning
[   84.347220] USB Serial support registered for GSM modem (1-port)
[   84.347258] option 2-4:1.0: GSM modem (1-port) converter detected
[   84.347318] usb 2-4: GSM modem (1-port) converter now attached to ttyUSB1
[   84.347323] option 2-4:1.1: GSM modem (1-port) converter detected
[   84.347349] usb 2-4: GSM modem (1-port) converter now attached to ttyUSB2
[   84.347358] usbcore: registered new interface driver option
[   84.347359] option: v0.7.2:USB Driver for GSM modems
[   89.326981] usb-storage: device scan complete
[   89.340019] scsi 11:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[   89.361258] usb-storage: device scan complete
[   89.370022] scsi 12:0:0:0: Direct-Access     HUAWEI   MMC Storage      2.31 PQ: 0 ANSI: 2
[   89.543458] sr1: scsi-1 drive
[   89.543535] sr 11:0:0:0: Attached scsi CD-ROM sr1
[   89.543582] sr 11:0:0:0: Attached scsi generic sg8 type 5
[   89.543662] sd 12:0:0:0: Attached scsi generic sg9 type 0
[   89.570045] sd 12:0:0:0: [sdh] Attached SCSI removable disk
[  104.133757] ISO 9660 Extensions: Microsoft Joliet Level 1
[  104.193756] ISOFS: changing to secondary root
[  162.821430] PPP BSD Compression module registered
[  162.851186] PPP Deflate Compression module registered

In Windows it shows up as huawei 3G and in the driver diagnostic tab the
stick answers it is an e160.

It seems there is no new firmware from medion for this stick and
flashing with firmware of another provider ends with a question for the
right password. The last try i made is to disable the pin in the
connectionmanager from Medion, because the manager ask me for the puk1
AND the pin. I think linux asks for the correct pin too many times and
after this the huawei ask for the puk, too!

Fortunately this works with the main-kernel (2.6.31-14-generic
#48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 x86_64 GNU/Linux)!!!!

Disabling the pin seems to be a workaraound for users with an e160
huawei web stick. Can someone confirm this? Perhaps it is a problem with
the pin / puk management ? I have tried so often and i am very sure it
was the right pin which i'm used.

Papamatti

-- 
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.