[Bug 373245] Re: karmic: wakeups <kernel core> : hrtimer_start_range_ns (tick_sched_timer)

vic_sarapin victor.sarapin at gmail.com
Thu Nov 12 13:19:12 UTC 2009


With which libraries? Does it mean Ubuntu One is causing excessive power
use just by fact it is present in the system?

** Description changed:

- Powertop reports a high number of wake ups attributed to 
+ Powertop reports a high number of wake ups attributed to
  hrtimer_start_range_ns.
- 
  
  This  occurs with the 2.6.28-11 kernel through to
  2.6.30-020630rc4-generic #020630rc4
  
  #uname -a
  Linux portland 2.6.30-020630rc4-generic #020630rc4 SMP Fri May 1 09:06:03 UTC 2009 i686 GNU/Linux
  
  Not sure if it makes much difference but i'm currently using UXA
  graphics accel.
- 
  
  root at portland:~# lsb_release -rd
  Description:    Ubuntu 9.04
  Release:        9.04
  
- 
  root at portland:~# powertop
- PowerTOP 1.11   (C) 2007, 2008 Intel Corporation 
+ PowerTOP 1.11   (C) 2007, 2008 Intel Corporation
  
  Collecting data for 5 seconds
  
- 
- Your CPU supports the following C-states : C1 C2 C3 C4 C5 C6 
- Your BIOS reports the following C-states : C1 C2 C6          
- root at portland:~# powertop -d                                 
- PowerTOP 1.11   (C) 2007, 2008 Intel Corporation             
+ Your CPU supports the following C-states : C1 C2 C3 C4 C5 C6
+ Your BIOS reports the following C-states : C1 C2 C6
+ root at portland:~# powertop -d
+ PowerTOP 1.11   (C) 2007, 2008 Intel Corporation
  
  Collecting data for 15 seconds
  
- 
- Your CPU supports the following C-states : C1 C2 C3 C4 C5 C6 
- Your BIOS reports the following C-states : C1 C2 C6          
- Cn                Avg residency                              
- C0 (cpu running)        ( 5.5%)                              
- polling           0.0ms ( 0.0%)                              
- C1 mwait          0.0ms ( 0.0%)                              
- C2 mwait          0.2ms ( 0.1%)                              
- C6 mwait          8.2ms (94.4%)                              
- P-states (frequencies)                                       
-   2.27 Ghz     3.0%                                          
-   2.27 Ghz     0.5%                                          
-   1.60 Ghz     1.3%                                          
-    800 Mhz    95.2%                                          
- Wakeups-from-idle per second : 119.1    interval: 15.0s      
- Power usage (ACPI estimate): 10.6W (2.0 hours)               
- Top causes for wakeups:                                      
-   35.2% ( 66.3)     <kernel core> : hrtimer_start_range_ns (tick_sched_timer) 
-   16.1% ( 30.4)      <kernel IPI> : Rescheduling interrupts                   
-   15.4% ( 29.0)       <interrupt> : PS/2 keyboard/mouse/touchpad              
-   10.4% ( 19.7)       <interrupt> : iwlagn                                    
-    8.3% ( 15.7)       <interrupt> : extra timer interrupt                     
-    3.3% (  6.2)         konqueror : hrtimer_start_range_ns (hrtimer_wakeup)   
-    1.7% (  3.3)          knotify4 : hrtimer_start_range_ns (hrtimer_wakeup)   
-    1.5% (  2.9)       <interrupt> : i915 at pci:0000:00:02.0                     
-    1.2% (  2.3)     <kernel core> : hrtimer_start (tick_sched_timer)          
-    1.1% (  2.0)            mysqld : hrtimer_start_range_ns (hrtimer_wakeup)   
-    1.0% (  1.9)            plasma : hrtimer_start_range_ns (hrtimer_wakeup)   
-    0.6% (  1.2)              kwin : hrtimer_start_range_ns (hrtimer_wakeup)   
-    0.5% (  1.0)           apache2 : hrtimer_start_range_ns (hrtimer_wakeup)   
-    0.5% (  1.0)           klipper : hrtimer_start_range_ns (hrtimer_wakeup)   
-    0.5% (  0.9)       <interrupt> : ahci                                      
-    0.4% (  0.8)              Xorg : hrtimer_start (it_real_fn)                
-    0.4% (  0.7)              Xorg : queue_delayed_work (delayed_work_timer_fn) 
-    0.3% (  0.6)     <kernel core> : add_timer (neigh_periodic_timer)           
-    0.2% (  0.3)    NetworkManager : hrtimer_start_range_ns (hrtimer_wakeup)    
-    0.1% (  0.3)             kded4 : hrtimer_start_range_ns (hrtimer_wakeup)    
-    0.1% (  0.3)           pdflush : queue_delayed_work (delayed_work_timer_fn) 
-    0.1% (  0.2)   guidance-power- : hrtimer_start_range_ns (hrtimer_wakeup)    
-    0.1% (  0.2)           krunner : hrtimer_start_range_ns (hrtimer_wakeup)    
-    0.1% (  0.2)              phy0 : ieee80211_authenticate (ieee80211_sta_timer) 
-    0.1% (  0.1)           konsole : hrtimer_start_range_ns (hrtimer_wakeup)      
-    0.1% (  0.1)              Xorg : hrtimer_start_range_ns (hrtimer_wakeup)      
-    0.1% (  0.1)     <kernel core> : inet_twsk_schedule (inet_twdr_hangman)       
-    0.1% (  0.1)   <kernel module> : add_timer (sta_info_cleanup)                 
-    0.1% (  0.1)          kio_http : sk_reset_timer (tcp_write_timer)             
-    0.0% (  0.1)      <kernel IPI> : TLB shootdowns                               
-    0.0% (  0.1)        pulseaudio : hrtimer_start_range_ns (hrtimer_wakeup)      
-    0.0% (  0.1)          gconfd-2 : hrtimer_start_range_ns (hrtimer_wakeup)      
-    0.0% (  0.1)     <kernel core> : page_writeback_init (wb_timer_fn)            
-    0.0% (  0.1)     <kernel core> : start_rt_bandwidth (sched_rt_period_timer)
-    0.0% (  0.1)         ssh-agent : hrtimer_start_range_ns (hrtimer_wakeup)
-    0.0% (  0.1)        irqbalance : hrtimer_start_range_ns (hrtimer_wakeup)
-    0.0% (  0.1)     <kernel core> : laptop_io_completion (laptop_timer_fn)
-    0.0% (  0.1)            python : hrtimer_start_range_ns (hrtimer_wakeup)
-    0.0% (  0.1)             cupsd : ep_poll (process_timeout)
+ Your CPU supports the following C-states : C1 C2 C3 C4 C5 C6
+ Your BIOS reports the following C-states : C1 C2 C6
+ Cn                Avg residency
+ C0 (cpu running)        ( 5.5%)
+ polling           0.0ms ( 0.0%)
+ C1 mwait          0.0ms ( 0.0%)
+ C2 mwait          0.2ms ( 0.1%)
+ C6 mwait          8.2ms (94.4%)
+ P-states (frequencies)
+   2.27 Ghz     3.0%
+   2.27 Ghz     0.5%
+   1.60 Ghz     1.3%
+    800 Mhz    95.2%
+ Wakeups-from-idle per second : 119.1    interval: 15.0s
+ Power usage (ACPI estimate): 10.6W (2.0 hours)
+ Top causes for wakeups:
+   35.2% ( 66.3)     <kernel core> : hrtimer_start_range_ns (tick_sched_timer)
+   16.1% ( 30.4)      <kernel IPI> : Rescheduling interrupts
+   15.4% ( 29.0)       <interrupt> : PS/2 keyboard/mouse/touchpad
+   10.4% ( 19.7)       <interrupt> : iwlagn
+    8.3% ( 15.7)       <interrupt> : extra timer interrupt
+    3.3% (  6.2)         konqueror : hrtimer_start_range_ns (hrtimer_wakeup)
+    1.7% (  3.3)          knotify4 : hrtimer_start_range_ns (hrtimer_wakeup)
+    1.5% (  2.9)       <interrupt> : i915 at pci:0000:00:02.0
+    1.2% (  2.3)     <kernel core> : hrtimer_start (tick_sched_timer)
+    1.1% (  2.0)            mysqld : hrtimer_start_range_ns (hrtimer_wakeup)
+    1.0% (  1.9)            plasma : hrtimer_start_range_ns (hrtimer_wakeup)
+    0.6% (  1.2)              kwin : hrtimer_start_range_ns (hrtimer_wakeup)
+    0.5% (  1.0)           apache2 : hrtimer_start_range_ns (hrtimer_wakeup)
+    0.5% (  1.0)           klipper : hrtimer_start_range_ns (hrtimer_wakeup)
+    0.5% (  0.9)       <interrupt> : ahci
+    0.4% (  0.8)              Xorg : hrtimer_start (it_real_fn)
+    0.4% (  0.7)              Xorg : queue_delayed_work (delayed_work_timer_fn)
+    0.3% (  0.6)     <kernel core> : add_timer (neigh_periodic_timer)
+    0.2% (  0.3)    NetworkManager : hrtimer_start_range_ns (hrtimer_wakeup)
+    0.1% (  0.3)             kded4 : hrtimer_start_range_ns (hrtimer_wakeup)
+    0.1% (  0.3)           pdflush : queue_delayed_work (delayed_work_timer_fn)
+    0.1% (  0.2)   guidance-power- : hrtimer_start_range_ns (hrtimer_wakeup)
+    0.1% (  0.2)           krunner : hrtimer_start_range_ns (hrtimer_wakeup)
+    0.1% (  0.2)              phy0 : ieee80211_authenticate (ieee80211_sta_timer)
+    0.1% (  0.1)           konsole : hrtimer_start_range_ns (hrtimer_wakeup)
+    0.1% (  0.1)              Xorg : hrtimer_start_range_ns (hrtimer_wakeup)
+    0.1% (  0.1)     <kernel core> : inet_twsk_schedule (inet_twdr_hangman)
+    0.1% (  0.1)   <kernel module> : add_timer (sta_info_cleanup)
+    0.1% (  0.1)          kio_http : sk_reset_timer (tcp_write_timer)
+    0.0% (  0.1)      <kernel IPI> : TLB shootdowns
+    0.0% (  0.1)        pulseaudio : hrtimer_start_range_ns (hrtimer_wakeup)
+    0.0% (  0.1)          gconfd-2 : hrtimer_start_range_ns (hrtimer_wakeup)
+    0.0% (  0.1)     <kernel core> : page_writeback_init (wb_timer_fn)
+    0.0% (  0.1)     <kernel core> : start_rt_bandwidth (sched_rt_period_timer)
+    0.0% (  0.1)         ssh-agent : hrtimer_start_range_ns (hrtimer_wakeup)
+    0.0% (  0.1)        irqbalance : hrtimer_start_range_ns (hrtimer_wakeup)
+    0.0% (  0.1)     <kernel core> : laptop_io_completion (laptop_timer_fn)
+    0.0% (  0.1)            python : hrtimer_start_range_ns (hrtimer_wakeup)
+    0.0% (  0.1)             cupsd : ep_poll (process_timeout)
  
  Recent USB suspend statistics
  Active  Device name
-   0.0%  USB device usb8 : UHCI Host Controller (Linux 2.6.30-020630rc4-generic uhci_hcd)
-   0.0%  USB device usb7 : UHCI Host Controller (Linux 2.6.30-020630rc4-generic uhci_hcd)
-   0.0%  USB device usb6 : UHCI Host Controller (Linux 2.6.30-020630rc4-generic uhci_hcd)
-   0.0%  USB device usb5 : UHCI Host Controller (Linux 2.6.30-020630rc4-generic uhci_hcd)
-   0.0%  USB device usb4 : UHCI Host Controller (Linux 2.6.30-020630rc4-generic uhci_hcd)
-   0.0%  USB device usb3 : UHCI Host Controller (Linux 2.6.30-020630rc4-generic uhci_hcd)
-   0.0%  USB device usb2 : EHCI Host Controller (Linux 2.6.30-020630rc4-generic ehci_hcd)
-   0.0%  USB device usb1 : EHCI Host Controller (Linux 2.6.30-020630rc4-generic ehci_hcd)
- 
+   0.0%  USB device usb8 : UHCI Host Controller (Linux 2.6.30-020630rc4-generic uhci_hcd)
+   0.0%  USB device usb7 : UHCI Host Controller (Linux 2.6.30-020630rc4-generic uhci_hcd)
+   0.0%  USB device usb6 : UHCI Host Controller (Linux 2.6.30-020630rc4-generic uhci_hcd)
+   0.0%  USB device usb5 : UHCI Host Controller (Linux 2.6.30-020630rc4-generic uhci_hcd)
+   0.0%  USB device usb4 : UHCI Host Controller (Linux 2.6.30-020630rc4-generic uhci_hcd)
+   0.0%  USB device usb3 : UHCI Host Controller (Linux 2.6.30-020630rc4-generic uhci_hcd)
+   0.0%  USB device usb2 : EHCI Host Controller (Linux 2.6.30-020630rc4-generic ehci_hcd)
+   0.0%  USB device usb1 : EHCI Host Controller (Linux 2.6.30-020630rc4-generic ehci_hcd)
  
  root at portland:~# lspci -vvv
  00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
-         Subsystem: Lenovo Device 20e0                                                        
-         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
-         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- 
-         Latency: 0                                                                                           
-         Capabilities: [e0] Vendor Specific Information <?>                                                   
-         Kernel driver in use: agpgart-intel                                                                  
-         Kernel modules: intel-agp                                                                            
+         Subsystem: Lenovo Device 20e0
+         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
+         Latency: 0
+         Capabilities: [e0] Vendor Specific Information <?>
+         Kernel driver in use: agpgart-intel
+         Kernel modules: intel-agp
  
  00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
-         Subsystem: Lenovo Device 20e4                                                                               
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+       
-         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-        
-         Latency: 0                                                                                                  
-         Interrupt: pin A routed to IRQ 29                                                                           
-         Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M]                                           
-         Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]                                             
-         Region 4: I/O ports at 1800 [size=8]                                                                        
-         Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+                             
-                 Address: fee0100c  Data: 41b1                                                                       
-         Capabilities: [d0] Power Management version 3                                                               
-                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)                          
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                                         
+         Subsystem: Lenovo Device 20e4
+         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
+         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0
+         Interrupt: pin A routed to IRQ 29
+         Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M]
+         Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
+         Region 4: I/O ports at 1800 [size=8]
+         Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
+                 Address: fee0100c  Data: 41b1
+         Capabilities: [d0] Power Management version 3
+                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
+                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  
  00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
-         Subsystem: Lenovo Device 20e4                                                                        
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
-         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
-         Latency: 0                                                                                           
-         Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=1M]                                    
-         Capabilities: [d0] Power Management version 3                                                        
-                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)                   
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                                  
+         Subsystem: Lenovo Device 20e4
+         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0
+         Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=1M]
+         Capabilities: [d0] Power Management version 3
+                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
+                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  
  00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
-         Subsystem: Lenovo Device 20e6                                                              
-         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ 
-         Latency: 0                                                                                           
-         Interrupt: pin A routed to IRQ 11                                                                    
-         Region 0: Memory at f2826800 (64-bit, non-prefetchable) [size=16]                                    
-         Capabilities: [50] Power Management version 3                                                        
-                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)                   
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                                  
-         Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-                      
-                 Address: 0000000000000000  Data: 0000                                                        
+         Subsystem: Lenovo Device 20e6
+         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
+         Latency: 0
+         Interrupt: pin A routed to IRQ 11
+         Region 0: Memory at f2826800 (64-bit, non-prefetchable) [size=16]
+         Capabilities: [50] Power Management version 3
+                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+         Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
+                 Address: 0000000000000000  Data: 0000
  
  00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
-         Subsystem: Lenovo Device 20ee                                                     
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
-         Latency: 0                                                                                           
-         Interrupt: pin A routed to IRQ 27                                                                    
-         Region 0: Memory at f2600000 (32-bit, non-prefetchable) [size=128K]                                  
-         Region 1: Memory at f2625000 (32-bit, non-prefetchable) [size=4K]                                    
-         Region 2: I/O ports at 1840 [size=32]                                                                
-         Capabilities: [c8] Power Management version 2                                                        
-                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)                   
-                 Status: D0 PME-Enable- DSel=0 DScale=1 PME-                                                  
-         Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+                      
-                 Address: 00000000fee0100c  Data: 41c1                                                        
-         Capabilities: [e0] PCIe advanced features <?>                                                        
-         Kernel driver in use: e1000e                                                                         
-         Kernel modules: e1000e                                                                               
+         Subsystem: Lenovo Device 20ee
+         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
+         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0
+         Interrupt: pin A routed to IRQ 27
+         Region 0: Memory at f2600000 (32-bit, non-prefetchable) [size=128K]
+         Region 1: Memory at f2625000 (32-bit, non-prefetchable) [size=4K]
+         Region 2: I/O ports at 1840 [size=32]
+         Capabilities: [c8] Power Management version 2
+                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+                 Status: D0 PME-Enable- DSel=0 DScale=1 PME-
+         Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
+                 Address: 00000000fee0100c  Data: 41c1
+         Capabilities: [e0] PCIe advanced features <?>
+         Kernel driver in use: e1000e
+         Kernel modules: e1000e
  
  00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
-         Subsystem: Lenovo Device 20f0                                                         
-         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
-         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-         Latency: 0                                                                                            
-         Interrupt: pin A routed to IRQ 20                                                                     
-         Region 4: I/O ports at 1860 [size=32]                                                                 
-         Capabilities: [50] PCIe advanced features <?>                                                         
-         Kernel driver in use: uhci_hcd                                                                        
+         Subsystem: Lenovo Device 20f0
+         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0
+         Interrupt: pin A routed to IRQ 20
+         Region 4: I/O ports at 1860 [size=32]
+         Capabilities: [50] PCIe advanced features <?>
+         Kernel driver in use: uhci_hcd
  
  00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
-         Subsystem: Lenovo Device 20f0                                                         
-         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
-         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-         Latency: 0                                                                                            
-         Interrupt: pin B routed to IRQ 21                                                                     
-         Region 4: I/O ports at 1880 [size=32]                                                                 
-         Capabilities: [50] PCIe advanced features <?>                                                         
-         Kernel driver in use: uhci_hcd                                                                        
+         Subsystem: Lenovo Device 20f0
+         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0
+         Interrupt: pin B routed to IRQ 21
+         Region 4: I/O ports at 1880 [size=32]
+         Capabilities: [50] PCIe advanced features <?>
+         Kernel driver in use: uhci_hcd
  
  00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
-         Subsystem: Lenovo Device 20f0                                                         
-         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
-         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-         Latency: 0                                                                                            
-         Interrupt: pin C routed to IRQ 22                                                                     
-         Region 4: I/O ports at 18a0 [size=32]                                                                 
-         Capabilities: [50] PCIe advanced features <?>                                                         
-         Kernel driver in use: uhci_hcd                                                                        
+         Subsystem: Lenovo Device 20f0
+         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0
+         Interrupt: pin C routed to IRQ 22
+         Region 4: I/O ports at 18a0 [size=32]
+         Capabilities: [50] PCIe advanced features <?>
+         Kernel driver in use: uhci_hcd
  
  00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20)
-         Subsystem: Lenovo Device 20f1                                                                       
-         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
-         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-         Latency: 0                                                                                            
-         Interrupt: pin D routed to IRQ 23                                                                     
-         Region 0: Memory at f2826c00 (32-bit, non-prefetchable) [size=1K]                                     
-         Capabilities: [50] Power Management version 2                                                         
-                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)                  
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                                   
-         Capabilities: [58] Debug port: BAR=1 offset=00a0                                                      
-         Capabilities: [98] PCIe advanced features <?>                                                         
-         Kernel driver in use: ehci_hcd                                                                        
+         Subsystem: Lenovo Device 20f1
+         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0
+         Interrupt: pin D routed to IRQ 23
+         Region 0: Memory at f2826c00 (32-bit, non-prefetchable) [size=1K]
+         Capabilities: [50] Power Management version 2
+                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+         Capabilities: [58] Debug port: BAR=1 offset=00a0
+         Capabilities: [98] PCIe advanced features <?>
+         Kernel driver in use: ehci_hcd
  
  00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
-         Subsystem: Lenovo Device 20f2                                                    
-         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
-         Latency: 0, Cache Line Size: 64 bytes                                                                
-         Interrupt: pin B routed to IRQ 17                                                                    
-         Region 0: Memory at f2620000 (64-bit, non-prefetchable) [size=16K]                                   
-         Capabilities: [50] Power Management version 2                                                        
-                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)                  
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                                  
-         Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-                      
-                 Address: 0000000000000000  Data: 0000                                                        
-         Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00                             
-                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us                        
-                         ExtTag- RBE- FLReset+                                                                
-                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-                           
-                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+                                         
-                         MaxPayload 128 bytes, MaxReadReq 128 bytes                                           
-                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-                          
-                 LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us            
-                         ClockPM- Suprise- LLActRep- BwNot-                                                   
-                 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-                                           
-                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-                                       
-                 LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-           
-         Capabilities: [100] Virtual Channel <?>                                                              
-         Capabilities: [130] Root Complex Link <?>                                                            
-         Kernel driver in use: HDA Intel                                                                      
-         Kernel modules: snd-hda-intel                                                                        
+         Subsystem: Lenovo Device 20f2
+         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0, Cache Line Size: 64 bytes
+         Interrupt: pin B routed to IRQ 17
+         Region 0: Memory at f2620000 (64-bit, non-prefetchable) [size=16K]
+         Capabilities: [50] Power Management version 2
+                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+         Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
+                 Address: 0000000000000000  Data: 0000
+         Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
+                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
+                         ExtTag- RBE- FLReset+
+                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
+                         MaxPayload 128 bytes, MaxReadReq 128 bytes
+                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+                 LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
+                         ClockPM- Suprise- LLActRep- BwNot-
+                 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
+                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+                 LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
+         Capabilities: [100] Virtual Channel <?>
+         Capabilities: [130] Root Complex Link <?>
+         Kernel driver in use: HDA Intel
+         Kernel modules: snd-hda-intel
  
  00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
-         Latency: 0, Cache Line Size: 64 bytes                                                                
-         Bus: primary=00, secondary=02, subordinate=02, sec-latency=0                                         
-         I/O behind bridge: 0000f000-00000fff                                                                 
-         Memory behind bridge: fff00000-000fffff                                                              
-         Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff                                 
-         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-       
-         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-                                        
-                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-                                          
-         Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00                                            
-                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us                        
-                         ExtTag- RBE+ FLReset-                                                                
-                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-                           
-                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-                                         
-                         MaxPayload 128 bytes, MaxReadReq 128 bytes                                           
-                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-                          
-                 LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us              
-                         ClockPM- Suprise- LLActRep+ BwNot-                                                   
-                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-                              
-                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-                                       
-                 LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-           
-                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+                            
-                         Slot #  0, PowerLimit 6.500000; Interlock- NoCompl-                                  
-                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-                      
-                         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-                          
-                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-                         
-                         Changed: MRL- PresDet- LinkState-                                                    
-                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-                      
-                 RootCap: CRSVisible-                                                                         
-                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-                                              
-         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+                      
-                 Address: fee0300c  Data: 4159                                                                
-         Capabilities: [90] Subsystem: Lenovo Device 20f3                                                     
-         Capabilities: [a0] Power Management version 2                                                        
-                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)                   
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                                  
-         Capabilities: [100] Virtual Channel <?>                                                              
-         Capabilities: [180] Root Complex Link <?>                                                            
-         Kernel driver in use: pcieport-driver                                                                
-         Kernel modules: shpchp                                                                               
+         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
+         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0, Cache Line Size: 64 bytes
+         Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
+         I/O behind bridge: 0000f000-00000fff
+         Memory behind bridge: fff00000-000fffff
+         Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
+         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
+         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
+                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+         Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
+                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
+                         ExtTag- RBE+ FLReset-
+                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
+                         MaxPayload 128 bytes, MaxReadReq 128 bytes
+                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+                 LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
+                         ClockPM- Suprise- LLActRep+ BwNot-
+                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
+                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+                 LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
+                         Slot #  0, PowerLimit 6.500000; Interlock- NoCompl-
+                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
+                         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
+                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
+                         Changed: MRL- PresDet- LinkState-
+                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
+                 RootCap: CRSVisible-
+                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
+         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
+                 Address: fee0300c  Data: 4159
+         Capabilities: [90] Subsystem: Lenovo Device 20f3
+         Capabilities: [a0] Power Management version 2
+                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+         Capabilities: [100] Virtual Channel <?>
+         Capabilities: [180] Root Complex Link <?>
+         Kernel driver in use: pcieport-driver
+         Kernel modules: shpchp
  
  00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
-         Latency: 0, Cache Line Size: 64 bytes                                                                
-         Bus: primary=00, secondary=03, subordinate=03, sec-latency=0                                         
-         I/O behind bridge: 0000f000-00000fff                                                                 
-         Memory behind bridge: f2500000-f25fffff                                                              
-         Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff                                 
-         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-       
-         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-                                        
-                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-                                          
-         Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00                                            
-                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us                        
-                         ExtTag- RBE+ FLReset-                                                                
-                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-                           
-                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-                                         
-                         MaxPayload 128 bytes, MaxReadReq 128 bytes                                           
-                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-                          
-                 LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us            
-                         ClockPM- Suprise- LLActRep+ BwNot-                                                   
-                 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+                            
-                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-                                       
-                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-           
-                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+                            
-                         Slot #  1, PowerLimit 6.500000; Interlock- NoCompl-                                  
-                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-                      
-                         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-                          
-                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-                         
-                         Changed: MRL- PresDet- LinkState+                                                    
-                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-                      
-                 RootCap: CRSVisible-                                                                         
-                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-                                              
-         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+                      
-                 Address: fee0300c  Data: 4161                                                                
-         Capabilities: [90] Subsystem: Lenovo Device 20f3                                                     
-         Capabilities: [a0] Power Management version 2                                                        
-                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)                   
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                                  
-         Capabilities: [100] Virtual Channel <?>                                                              
-         Capabilities: [180] Root Complex Link <?>                                                            
-         Kernel driver in use: pcieport-driver                                                                
-         Kernel modules: shpchp                                                                               
+         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
+         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0, Cache Line Size: 64 bytes
+         Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
+         I/O behind bridge: 0000f000-00000fff
+         Memory behind bridge: f2500000-f25fffff
+         Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
+         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
+         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
+                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+         Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
+                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
+                         ExtTag- RBE+ FLReset-
+                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
+                         MaxPayload 128 bytes, MaxReadReq 128 bytes
+                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+                 LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
+                         ClockPM- Suprise- LLActRep+ BwNot-
+                 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
+                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
+                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
+                         Slot #  1, PowerLimit 6.500000; Interlock- NoCompl-
+                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
+                         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
+                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
+                         Changed: MRL- PresDet- LinkState+
+                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
+                 RootCap: CRSVisible-
+                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
+         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
+                 Address: fee0300c  Data: 4161
+         Capabilities: [90] Subsystem: Lenovo Device 20f3
+         Capabilities: [a0] Power Management version 2
+                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+         Capabilities: [100] Virtual Channel <?>
+         Capabilities: [180] Root Complex Link <?>
+         Kernel driver in use: pcieport-driver
+         Kernel modules: shpchp
  
  00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
-         Subsystem: Lenovo Device 20f0                                                         
-         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
-         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-         Latency: 0                                                                                            
-         Interrupt: pin A routed to IRQ 16                                                                     
-         Region 4: I/O ports at 18c0 [size=32]                                                                 
-         Capabilities: [50] PCIe advanced features <?>                                                         
-         Kernel driver in use: uhci_hcd                                                                        
+         Subsystem: Lenovo Device 20f0
+         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0
+         Interrupt: pin A routed to IRQ 16
+         Region 4: I/O ports at 18c0 [size=32]
+         Capabilities: [50] PCIe advanced features <?>
+         Kernel driver in use: uhci_hcd
  
  00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
-         Subsystem: Lenovo Device 20f0                                                         
-         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
-         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-         Latency: 0                                                                                            
-         Interrupt: pin B routed to IRQ 17                                                                     
-         Region 4: I/O ports at 18e0 [size=32]                                                                 
-         Capabilities: [50] PCIe advanced features <?>                                                         
-         Kernel driver in use: uhci_hcd                                                                        
+         Subsystem: Lenovo Device 20f0
+         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0
+         Interrupt: pin B routed to IRQ 17
+         Region 4: I/O ports at 18e0 [size=32]
+         Capabilities: [50] PCIe advanced features <?>
+         Kernel driver in use: uhci_hcd
  
  00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
-         Subsystem: Lenovo Device 20f0                                                         
-         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
-         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-         Latency: 0                                                                                            
-         Interrupt: pin C routed to IRQ 18                                                                     
-         Region 4: I/O ports at 1c00 [size=32]                                                                 
-         Capabilities: [50] PCIe advanced features <?>                                                         
-         Kernel driver in use: uhci_hcd                                                                        
+         Subsystem: Lenovo Device 20f0
+         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0
+         Interrupt: pin C routed to IRQ 18
+         Region 4: I/O ports at 1c00 [size=32]
+         Capabilities: [50] PCIe advanced features <?>
+         Kernel driver in use: uhci_hcd
  
  00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20)
-         Subsystem: Lenovo Device 20f1                                                                       
-         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
-         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-         Latency: 0                                                                                            
-         Interrupt: pin D routed to IRQ 19                                                                     
-         Region 0: Memory at f2827000 (32-bit, non-prefetchable) [size=1K]                                     
-         Capabilities: [50] Power Management version 2                                                         
-                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)                  
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                                   
-         Capabilities: [58] Debug port: BAR=1 offset=00a0                                                      
-         Capabilities: [98] PCIe advanced features <?>                                                         
-         Kernel driver in use: ehci_hcd                                                                        
+         Subsystem: Lenovo Device 20f1
+         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0
+         Interrupt: pin D routed to IRQ 19
+         Region 0: Memory at f2827000 (32-bit, non-prefetchable) [size=1K]
+         Capabilities: [50] Power Management version 2
+                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+         Capabilities: [58] Debug port: BAR=1 offset=00a0
+         Capabilities: [98] PCIe advanced features <?>
+         Kernel driver in use: ehci_hcd
  
  00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01)
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
-         Latency: 0                                                                                           
-         Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0                                         
-         I/O behind bridge: 0000f000-00000fff                                                                 
-         Memory behind bridge: fff00000-000fffff                                                              
-         Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff                                 
-         Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-     
-         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-                                        
-                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-                                          
-         Capabilities: [50] Subsystem: Lenovo Device 20f4                                                     
+         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0
+         Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
+         I/O behind bridge: 0000f000-00000fff
+         Memory behind bridge: fff00000-000fffff
+         Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
+         Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
+         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
+                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+         Capabilities: [50] Subsystem: Lenovo Device 20f4
  
  00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
-         Subsystem: Lenovo Device 20f5                                          
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-         Latency: 0                                                                                            
-         Capabilities: [e0] Vendor Specific Information <?>                                                    
-         Kernel modules: iTCO_wdt                                                                              
+         Subsystem: Lenovo Device 20f5
+         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0
+         Capabilities: [e0] Vendor Specific Information <?>
+         Kernel modules: iTCO_wdt
  
  00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01)
-         Subsystem: Lenovo Device 20f8                                                          
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
-         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-         Latency: 0                                                                                            
-         Interrupt: pin B routed to IRQ 26                                                                     
-         Region 0: I/O ports at 1c48 [size=8]                                                                  
-         Region 1: I/O ports at 183c [size=4]                                                                  
-         Region 2: I/O ports at 1c40 [size=8]                                                                  
-         Region 3: I/O ports at 1838 [size=4]                                                                  
-         Region 4: I/O ports at 1c20 [size=32]                                                                 
-         Region 5: Memory at f2826000 (32-bit, non-prefetchable) [size=2K]                                     
-         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/4 Enable+                       
-                 Address: fee0300c  Data: 4171                                                                 
-         Capabilities: [70] Power Management version 3                                                         
-                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)                    
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                                   
-         Capabilities: [a8] SATA HBA <?>                                                                       
-         Capabilities: [b0] PCIe advanced features <?>                                                         
-         Kernel driver in use: ahci                                                                            
+         Subsystem: Lenovo Device 20f8
+         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
+         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0
+         Interrupt: pin B routed to IRQ 26
+         Region 0: I/O ports at 1c48 [size=8]
+         Region 1: I/O ports at 183c [size=4]
+         Region 2: I/O ports at 1c40 [size=8]
+         Region 3: I/O ports at 1838 [size=4]
+         Region 4: I/O ports at 1c20 [size=32]
+         Region 5: Memory at f2826000 (32-bit, non-prefetchable) [size=2K]
+         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/4 Enable+
+                 Address: fee0300c  Data: 4171
+         Capabilities: [70] Power Management version 3
+                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
+                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+         Capabilities: [a8] SATA HBA <?>
+         Capabilities: [b0] PCIe advanced features <?>
+         Kernel driver in use: ahci
  
  00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
-         Subsystem: Lenovo Device 20f9                                          
-         Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
-         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-         Interrupt: pin A routed to IRQ 11                                                                     
-         Region 0: Memory at f2827400 (64-bit, non-prefetchable) [size=256]                                    
-         Region 4: I/O ports at 1c60 [size=32]                                                                 
-         Kernel modules: i2c-i801                                                                              
+         Subsystem: Lenovo Device 20f9
+         Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
+         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Interrupt: pin A routed to IRQ 11
+         Region 0: Memory at f2827400 (64-bit, non-prefetchable) [size=256]
+         Region 4: I/O ports at 1c60 [size=32]
+         Kernel modules: i2c-i801
  
  03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
-         Subsystem: Intel Corporation Device 1211                                               
-         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
-         Latency: 0, Cache Line Size: 64 bytes
-         Interrupt: pin A routed to IRQ 28
-         Region 0: Memory at f2500000 (64-bit, non-prefetchable) [size=8K]
-         Capabilities: [c8] Power Management version 3
-                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-         Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
-                 Address: 00000000fee0300c  Data: 41a9
-         Capabilities: [e0] Express (v1) Endpoint, MSI 00
-                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
-                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
-                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
-                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
-                         MaxPayload 128 bytes, MaxReadReq 128 bytes
-                 DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
-                 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <32us
-                         ClockPM+ Suprise- LLActRep- BwNot-
-                 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
-                         ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
-                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
-         Capabilities: [100] Advanced Error Reporting <?>
-         Capabilities: [140] Device Serial Number 26-94-a9-ff-ff-5d-21-00
-         Kernel driver in use: iwlagn
-         Kernel modules: iwlagn
+         Subsystem: Intel Corporation Device 1211
+         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0, Cache Line Size: 64 bytes
+         Interrupt: pin A routed to IRQ 28
+         Region 0: Memory at f2500000 (64-bit, non-prefetchable) [size=8K]
+         Capabilities: [c8] Power Management version 3
+                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+         Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
+                 Address: 00000000fee0300c  Data: 41a9
+         Capabilities: [e0] Express (v1) Endpoint, MSI 00
+                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
+                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
+                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
+                         MaxPayload 128 bytes, MaxReadReq 128 bytes
+                 DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
+                 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <32us
+                         ClockPM+ Suprise- LLActRep- BwNot-
+                 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
+                         ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
+                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+         Capabilities: [100] Advanced Error Reporting <?>
+         Capabilities: [140] Device Serial Number 26-94-a9-ff-ff-5d-21-00
+         Kernel driver in use: iwlagn
+         Kernel modules: iwlagn

-- 
karmic: wakeups  <kernel core> : hrtimer_start_range_ns (tick_sched_timer) 
https://bugs.launchpad.net/bugs/373245
You received this bug notification because you are a member of Kernel
Bugs, which is a direct subscriber.




More information about the kernel-bugs mailing list