[Bug 45860] Re: tulip driver doesn't work for Davicom

maximi89 maximi89 at gmail.com
Thu May 7 07:23:52 UTC 2009


Without any change when reboot:


maximi89 at Maximiliano:~$ sudo ethtool -i eth0
driver: tulip
version: 1.1.15-NAPI
firmware-version:
bus-info: 0000:01:0a.0

maximi89 at Maximiliano:~$ sudo mii-tool
eth0: negotiated 100baseTx-FD, link ok

maximi89 at Maximiliano:~$ sudo mii-diag
Using the default interface 'eth0'.
Basic registers of MII PHY #1:  1000 782d 0181 b841 01e1 4de1 0001 0000.
 The autonegotiated capability is 01e0.
The autonegotiated media type is 100baseTx-FD.
 Basic mode control register 0x1000: Auto-negotiation enabled.
 You have link beat, and everything is working OK.
 Your link partner advertised 4de1: Flow-control 100baseTx-FD 100baseTx 10baseT-FD 10baseT, w/ 802.3X flow control.
   End of basic transceiver information.

-- 
tulip driver doesn't work for Davicom
https://bugs.launchpad.net/bugs/45860
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux-source-2.6.15 in ubuntu.




More information about the kernel-bugs mailing list