[Bug 347711] Re: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller Unstable on Jaunty
Jorge Suarez
andres.430 at gmail.com
Tue Mar 24 20:36:52 UTC 2009
This is an Intrepid reinstall (it was working fine before but HDD had
some errors), have the same problem, but noticed something
I don't remember having installed any special patches, but on my
previous Intrepid setup my interface was named eth0, now it's named
eth2. Also something weird when comparing output of mii-tool, and
eththool
=> ifconfig
eth2 Link encap:Ethernet HWaddr 00:1c:c0:a7:b3:37
inet addr:192.168.1.50 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: 2002:be9b:d58c:0:21c:c0ff:fea7:b337/64 Scope:Global
inet6 addr: fe80::21c:c0ff:fea7:b337/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:14671268 errors:0 dropped:0 overruns:0 frame:0
TX packets:10328468 errors:0 dropped:46 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2911705282 (2.9 GB) TX bytes:897510370 (897.5 MB)
Interrupt:220 Base address:0x2000
=> mii-tool
eth2: negotiated 1000baseT-HD flow-control, link ok
Says 1000-HD
=> ethtool eth2
Settings for eth2:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000033 (51)
Link detected: yes
Says 1000FD, no way to force 1000FD on mii-tool and I don't know which
is right.
--
Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller Unstable on Jaunty
https://bugs.launchpad.net/bugs/347711
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
More information about the kernel-bugs
mailing list