[Bug 446146] Re: Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update related)
Bruno Cunha
brunoscunha at gmail.com
Tue Dec 8 18:18:47 UTC 2009
With the latest updates E220 stopped working again.
lsusb stated the following
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 046d:c062 Logitech, Inc.
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 003: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
dmesg
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 046d:c062 Logitech, Inc.
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 003: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
bruno at bruno-laptop:~$ dmesg | more
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-16-generic (buildd at vernadsky) (gcc version 4
.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #52-Ubuntu SMP Thu Dec 3 22:00:22 UTC 2009 (Ubunt
u 2.6.31-16.52-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005f7b0000 (usable)
[ 0.000000] BIOS-e820: 000000005f7b0000 - 000000005f7c5400 (reserved)
[ 0.000000] BIOS-e820: 000000005f7c5400 - 000000005f7e7fb8 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000005f7e7fb8 - 0000000060000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x5f7b0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 base 05F800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0FEDA0000 mask FFFFE0000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) =
=> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000005f7b0000 (usable)
[ 0.000000] modified: 000000005f7b0000 - 000000005f7c5400 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000005f7b0000 (usable)
[ 0.000000] modified: 000000005f7b0000 - 000000005f7c5400 (reserved)
[ 0.000000] modified: 000000005f7c5400 - 000000005f7e7fb8 (ACPI NVS)
[ 0.000000] modified: 000000005f7e7fb8 - 0000000060000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed9a000 (reserved)
[ 0.000000] modified: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 378a6000 - 37fefeba
[ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff6eba
[ 0.000000] Move RAMDISK from 00000000378a6000 - 0000000037fefeb9 to 008ad000
- 00ff6eb9
[ 0.000000] ACPI: RSDP 000f77a0 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 5f7c81c4 00074 (v01 HPQOEM SLIC-MPC 00000001 HP 0000
0001)
[ 0.000000] ACPI: FACP 5f7c8084 000F4 (v04 HP 30BE 00000003 HP 0000
0001)
[ 0.000000] ACPI: DSDT 5f7c84c0 12EA7 (v01 HP nc65xx 00010000 MSFT 0300
0001)
[ 0.000000] ACPI: FACS 5f7e7d80 00040
[ 0.000000] ACPI: SLIC 5f7c8238 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 0000
0001)
[ 0.000000] ACPI: HPET 5f7c83b0 00038 (v01 HP 30BE 00000001 HP 0000
0001)
[ 0.000000] ACPI: APIC 5f7c83e8 00068 (v01 HP 30BE 00000001 HP 0000
0001)
[ 0.000000] ACPI: MCFG 5f7c8450 0003C (v01 HP 30BE 00000001 HP 0000
0001)
[ 0.000000] ACPI: TCPA 5f7c848c 00032 (v02 HP 30BE 00000001 HP 0000
0001)
[ 0.000000] ACPI: SSDT 5f7db367 0032F (v01 HP HPQSAT 00000001 MSFT 0300
0001)
[ 0.000000] ACPI: SSDT 5f7dbeda 0025F (v01 HP Cpu0Tst 00003000 INTL 2006
0317)
[ 0.000000] ACPI: SSDT 5f7dc139 000A6 (v01 HP Cpu1Tst 00003000 INTL 2006
0317)
[ 0.000000] ACPI: SSDT 5f7dc1df 004D7 (v01 HP CpuPm 00003000 INTL 2006
0317)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 639MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 -
0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 -
0000007000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 -
0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a
80a0]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 000010
0000]
[ 0.000000] #5 [00008a9000 - 00008ac150] BRK ==> [00008a9000 - 00008a
c150]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 000000
8000]
[ 0.000000] #7 [00008ad000 - 0000ff6eba] NEW RAMDISK ==> [00008ad000 - 0000ff
6eba]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000
f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0005f7b0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0005f7b0
[ 0.000000] On node 0 totalpages: 390987
[ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1280 pages used for memmap
[ 0.000000] HighMem zone: 162482 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1bf7000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387
931
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic root=UUI
D=d87000b4-590d-4e51-aa10-84c3bf15a410 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 7821760 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgrou
ps
[ 0.000000] Initializing HighMem for node 0 (000377fe:0005f7b0)
[ 0.000000] Memory: 1526904k/1564352k available (4566k kernel code, 36148k reserved,
2142k data, 540k init, 655048k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575b94 - 0xc078d3c8 (2142 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575b94 (4566 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...
Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1795.524 MHz processor.
[ 0.001274] Console: colour VGA+ 80x25
[ 0.001277] console [tty0] enabled
[ 0.001451] hpet clockevent registered
[ 0.001455] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001461] Calibrating delay loop (skipped), value calculated using timer frequency
.. 3591.04 BogoMIPS (lpj=7182096)
[ 0.001479] Security Framework initialized
[ 0.001499] AppArmor: AppArmor initialized
[ 0.001505] Mount-cache hash table entries: 512
[ 0.001632] Initializing cgroup subsys ns
[ 0.001637] Initializing cgroup subsys cpuacct
[ 0.001641] Initializing cgroup subsys memory
[ 0.001648] Initializing cgroup subsys freezer
[ 0.001650] Initializing cgroup subsys net_cls
[ 0.001664] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001667] CPU: L2 cache: 2048K
[ 0.001670] CPU: Physical Processor ID: 0
[ 0.001671] CPU: Processor Core ID: 0
[ 0.001675] mce: CPU supports 6 MCE banks
[ 0.001682] CPU0: Thermal monitoring handled by SMI
[ 0.001686] using mwait in idle threads.
[ 0.001691] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001700] ... version: 2
[ 0.001702] ... bit width: 40
[ 0.001704] ... generic counters: 2
[ 0.001705] ... value mask: 000000ffffffffff
[ 0.001707] ... max period: 000000007fffffff
[ 0.001709] ... fixed-purpose counters: 3
[ 0.001711] ... counter mask: 0000000700000003
[ 0.001715] Checking 'hlt' instruction... OK.
[ 0.018535] ACPI: Core revision 20090521
[ 0.044429] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084359] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
[ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3590.98 BogoMIPS (lpj=7
181969)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.173556] CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
[ 0.173572] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.176022] Brought up 2 CPUs
[ 0.176025] Total of 2 processors activated (7182.03 BogoMIPS).
[ 0.176078] CPU0 attaching sched-domain:
[ 0.176081] domain 0: span 0-1 level MC
[ 0.176084] groups: 0 1
[ 0.176090] CPU1 attaching sched-domain:
[ 0.176093] domain 0: span 0-1 level MC
[ 0.176095] groups: 1 0
[ 0.176177] HP Compaq Laptop series board detected. Selecting BIOS-method for reboot
s.
[ 0.176177] Booting paravirtualized kernel on bare hardware
[ 0.176235] regulator: core version 0.5
[ 0.176235] Time: 17:56:35 Date: 12/08/09
[ 0.176235] NET: Registered protocol family 16
[ 0.176235] EISA bus registered
[ 0.176242] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.176245] ACPI: bus type pci registered
[ 0.176319] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.176322] PCI: Not using MMCONFIG.
[ 0.177387] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=40
[ 0.177389] PCI: Using configuration type 1 for base access
[ 0.180708] bio: create slab <bio-0> at 0
[ 0.181492] ACPI: EC: Look up EC in DSDT
[ 0.212021] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.248141] ACPI: Interpreter enabled
[ 0.248150] ACPI: (supports S0 S3 S4 S5)
[ 0.248170] ACPI: Using IOAPIC for interrupt routing
[ 0.248234] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.256900] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
[ 0.256903] PCI: Using MMCONFIG for extended config space
[ 0.269320] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.269323] ACPI: EC: driver started in interrupt mode
[ 0.269534] ACPI: Power Resource [C281] (on)
[ 0.269583] ACPI: Power Resource [C29D] (on)
[ 0.269638] ACPI: Power Resource [C1C5] (off)
[ 0.269741] ACPI: Power Resource [C3B5] (off)
[ 0.269839] ACPI: Power Resource [C3B6] (off)
[ 0.269937] ACPI: Power Resource [C3B7] (off)
[ 0.270034] ACPI: Power Resource [C3B8] (off)
[ 0.270131] ACPI: Power Resource [C3B9] (off)
[ 0.270524] ACPI: No dock devices found.
[ 0.275456] ACPI: PCI Root Bridge [C003] (0000:00)
[ 0.275562] pci 0000:00:02.0: reg 10 64bit mmio: [0xe4400000-0xe44fffff]
[ 0.275571] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.275577] pci 0000:00:02.0: reg 20 io port: [0x4000-0x4007]
[ 0.275625] pci 0000:00:02.1: reg 10 64bit mmio: [0xe4500000-0xe45fffff]
[ 0.275749] pci 0000:00:19.0: reg 10 32bit mmio: [0xe4600000-0xe461ffff]
[ 0.275759] pci 0000:00:19.0: reg 14 32bit mmio: [0xe4620000-0xe4620fff]
[ 0.275768] pci 0000:00:19.0: reg 18 io port: [0x4020-0x403f]
[ 0.275826] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.275832] pci 0000:00:19.0: PME# disabled
[ 0.275892] pci 0000:00:1a.0: reg 20 io port: [0x4040-0x405f]
[ 0.275965] pci 0000:00:1a.1: reg 20 io port: [0x4060-0x407f]
[ 0.276049] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe4621000-0xe46213ff]
[ 0.276121] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.276127] pci 0000:00:1a.7: PME# disabled
[ 0.276188] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe4624000-0xe4627fff]
[ 0.276257] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.276262] pci 0000:00:1b.0: PME# disabled
[ 0.276360] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.276366] pci 0000:00:1c.0: PME# disabled
[ 0.276466] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.276472] pci 0000:00:1c.1: PME# disabled
[ 0.276575] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.276581] pci 0000:00:1c.4: PME# disabled
[ 0.276654] pci 0000:00:1d.0: reg 20 io port: [0x4080-0x409f]
[ 0.276726] pci 0000:00:1d.1: reg 20 io port: [0x40a0-0x40bf]
[ 0.276799] pci 0000:00:1d.2: reg 20 io port: [0x40c0-0x40df]
[ 0.276879] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe4628000-0xe46283ff]
[ 0.276951] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.276957] pci 0000:00:1d.7: PME# disabled
[ 0.277144] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.277149] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
[ 0.277154] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[ 0.277163] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
[ 0.277257] pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7]
[ 0.277266] pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7]
[ 0.277275] pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377]
[ 0.277284] pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577]
[ 0.277293] pci 0000:00:1f.2: reg 20 io port: [0x4120-0x413f]
[ 0.277303] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe4629000-0xe46297ff]
[ 0.277351] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.277357] pci 0000:00:1f.2: PME# disabled
[ 0.277543] pci 0000:10:00.0: reg 10 64bit mmio: [0xe4000000-0xe4003fff]
[ 0.277649] pci 0000:10:00.0: supports D1 D2
[ 0.277750] pci 0000:00:1c.1: bridge 32bit mmio: [0xe4000000-0xe40fffff]
[ 0.277826] pci 0000:00:1c.4: bridge io port: [0x2000-0x3fff]
[ 0.277832] pci 0000:00:1c.4: bridge 32bit mmio: [0xe0000000-0xe3ffffff]
[ 0.277908] pci 0000:02:06.0: reg 10 32bit mmio: [0xe4100000-0xe4100fff]
[ 0.277940] pci 0000:02:06.0: supports D1 D2
[ 0.277942] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.277948] pci 0000:02:06.0: PME# disabled
[ 0.278005] pci 0000:02:06.1: reg 10 32bit mmio: [0xe4101000-0xe4101fff]
[ 0.278037] pci 0000:02:06.1: supports D1 D2
[ 0.278039] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.278046] pci 0000:02:06.1: PME# disabled
[ 0.278102] pci 0000:02:06.2: reg 10 32bit mmio: [0xe4102000-0xe41027ff]
[ 0.278183] pci 0000:02:06.2: supports D1 D2
[ 0.278186] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.278192] pci 0000:02:06.2: PME# disabled
[ 0.278248] pci 0000:02:06.3: reg 10 32bit mmio: [0xe4103000-0xe41030ff]
[ 0.278329] pci 0000:02:06.3: supports D1 D2
[ 0.278332] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.278338] pci 0000:02:06.3: PME# disabled
[ 0.278394] pci 0000:02:06.4: reg 10 32bit mmio: [0xe4104000-0xe41040ff]
[ 0.278475] pci 0000:02:06.4: supports D1 D2
[ 0.278478] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.278484] pci 0000:02:06.4: PME# disabled
[ 0.278557] pci 0000:00:1e.0: transparent bridge
[ 0.278566] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4100000-0xe43fffff]
[ 0.278652] pci_bus 0000:00: on NUMA node 0
[ 0.278657] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[ 0.278967] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
[ 0.279116] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
[ 0.279202] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
[ 0.279295] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
[ 0.321523] ACPI: PCI Interrupt Link [C12D] (IRQs *10 11)
[ 0.321745] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
[ 0.321963] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
[ 0.322181] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *5
[ 0.322400] ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
[ 0.322616] ACPI: PCI Interrupt Link [C141] (IRQs 10 11) *5
[ 0.322834] ACPI: PCI Interrupt Link [C142] (IRQs 10 *11)
[ 0.322934] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS 20090521 pci_link-182
[ 0.323189] SCSI subsystem initialized
[ 0.324019] libata version 3.00 loaded.
[ 0.324048] usbcore: registered new interface driver usbfs
[ 0.324048] usbcore: registered new interface driver hub
[ 0.324051] usbcore: registered new device driver usb
[ 0.324132] ACPI: WMI: Mapper loaded
[ 0.324134] PCI: Using ACPI for IRQ routing
[ 0.336009] Bluetooth: Core ver 2.15
[ 0.336015] NET: Registered protocol family 31
[ 0.336016] Bluetooth: HCI device and connection manager initialized
[ 0.336019] Bluetooth: HCI socket layer initialized
[ 0.336021] NetLabel: Initializing
[ 0.336023] NetLabel: domain hash size = 128
[ 0.336025] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.336038] NetLabel: unlabeled traffic allowed by default
[ 0.336073] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.336079] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.353598] pnp: PnP ACPI init
[ 0.353610] ACPI: bus type pnp registered
[ 0.362556] alloc irq_desc for 23 on node -1
[ 0.362559] alloc kstat_irqs on node -1
[ 0.364283] pnp: PnP ACPI: found 15 devices
[ 0.364285] ACPI: ACPI bus type pnp unregistered
[ 0.364290] PnPBIOS: Disabled by ACPI PNP
[ 0.364300] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.364304] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.364307] system 00:00: iomem range 0x100000-0x5f7fffff could not be reserved
[ 0.364319] system 00:0b: ioport range 0x500-0x55f has been reserved
[ 0.364322] system 00:0b: ioport range 0x800-0x80f has been reserved
[ 0.364326] system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.364329] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.364336] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[ 0.364339] system 00:0d: ioport range 0x1000-0x107f has been reserved
[ 0.364343] system 00:0d: ioport range 0x1100-0x113f has been reserved
[ 0.364346] system 00:0d: ioport range 0x1200-0x121f has been reserved
[ 0.364349] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.364352] system 00:0d: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 0.364356] system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.364359] system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.364363] system 00:0d: iomem range 0xfed90000-0xfed99fff has been reserved
[ 0.364369] system 00:0e: iomem range 0xcee00-0xcffff has been reserved
[ 0.364372] system 00:0e: iomem range 0xfeda0000-0xfedbffff has been reserved
[ 0.364375] system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.399056] AppArmor: AppArmor Filesystem Enabled
[ 0.399130] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
[ 0.399132] pci 0000:00:1c.0: IO window: disabled
[ 0.399139] pci 0000:00:1c.0: MEM window: disabled
[ 0.399144] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.399150] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10
[ 0.399152] pci 0000:00:1c.1: IO window: disabled
[ 0.399160] pci 0000:00:1c.1: MEM window: 0xe4000000-0xe40fffff
[ 0.399165] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.399171] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:28
[ 0.399175] pci 0000:00:1c.4: IO window: 0x2000-0x3fff
[ 0.399182] pci 0000:00:1c.4: MEM window: 0xe0000000-0xe3ffffff
[ 0.399188] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.399198] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
[ 0.399201] pci 0000:02:06.0: IO window: 0x005000-0x0050ff
[ 0.399208] pci 0000:02:06.0: IO window: 0x005400-0x0054ff
[ 0.399214] pci 0000:02:06.0: PREFETCH window: 0x60000000-0x63ffffff
[ 0.399221] pci 0000:02:06.0: MEM window: 0x68000000-0x6bffffff
[ 0.399228] pci 0000:02:06.1: CardBus bridge, secondary bus 0000:04
[ 0.399231] pci 0000:02:06.1: IO window: 0x005800-0x0058ff
[ 0.399238] pci 0000:02:06.1: IO window: 0x005c00-0x005cff
[ 0.399244] pci 0000:02:06.1: PREFETCH window: 0x64000000-0x67ffffff
[ 0.399251] pci 0000:02:06.1: MEM window: 0x6c000000-0x6fffffff
[ 0.399258] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.399262] pci 0000:00:1e.0: IO window: 0x5000-0x5fff
[ 0.399269] pci 0000:00:1e.0: MEM window: 0xe4100000-0xe43fffff
[ 0.399275] pci 0000:00:1e.0: PREFETCH window: 0x60000000-0x67ffffff
[ 0.399289] alloc irq_desc for 16 on node -1
[ 0.399291] alloc kstat_irqs on node -1
[ 0.399296] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.399303] pci 0000:00:1c.0: setting latency timer to 64
[ 0.399312] alloc irq_desc for 17 on node -1
[ 0.399314] alloc kstat_irqs on node -1
[ 0.399318] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.399324] pci 0000:00:1c.1: setting latency timer to 64
[ 0.399334] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.399340] pci 0000:00:1c.4: setting latency timer to 64
[ 0.399349] pci 0000:00:1e.0: setting latency timer to 64
[ 0.399360] alloc irq_desc for 18 on node -1
[ 0.399362] alloc kstat_irqs on node -1
[ 0.399366] pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.399379] alloc irq_desc for 19 on node -1
[ 0.399381] alloc kstat_irqs on node -1
[ 0.399385] pci 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.399393] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.399396] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.399399] pci_bus 0000:10: resource 1 mem: [0xe4000000-0xe40fffff]
[ 0.399402] pci_bus 0000:28: resource 0 io: [0x2000-0x3fff]
[ 0.399405] pci_bus 0000:28: resource 1 mem: [0xe0000000-0xe3ffffff]
[ 0.399408] pci_bus 0000:02: resource 0 io: [0x5000-0x5fff]
[ 0.399411] pci_bus 0000:02: resource 1 mem: [0xe4100000-0xe43fffff]
[ 0.399414] pci_bus 0000:02: resource 2 pref mem [0x60000000-0x67ffffff]
[ 0.399417] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.399419] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.399422] pci_bus 0000:03: resource 0 io: [0x5000-0x50ff]
[ 0.399425] pci_bus 0000:03: resource 1 io: [0x5400-0x54ff]
[ 0.399428] pci_bus 0000:03: resource 2 pref mem [0x60000000-0x63ffffff]
[ 0.399431] pci_bus 0000:03: resource 3 mem: [0x68000000-0x6bffffff]
[ 0.399434] pci_bus 0000:04: resource 0 io: [0x5800-0x58ff]
[ 0.399436] pci_bus 0000:04: resource 1 io: [0x5c00-0x5cff]
[ 0.399439] pci_bus 0000:04: resource 2 pref mem [0x64000000-0x67ffffff]
[ 0.399442] pci_bus 0000:04: resource 3 mem: [0x6c000000-0x6fffffff]
[ 0.399479] NET: Registered protocol family 2
[ 0.399585] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.399947] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.400422] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.400653] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.400656] TCP reno registered
[ 0.400734] NET: Registered protocol family 1
[ 0.400803] Trying to unpack rootfs image as initramfs...
[ 0.501602] Switched to high resolution mode on CPU 1
[ 0.503999] Switched to high resolution mode on CPU 0
[ 0.608463] Freeing initrd memory: 7463k freed
[ 0.612664] cpufreq-nforce2: No nForce2 chipset.
[ 0.612699] Scanning for low memory corruption every 60 seconds
[ 0.612812] audit: initializing netlink socket (disabled)
[ 0.612830] type=2000 audit(1260294994.609:1): initialized
[ 0.622346] highmem bounce pool size: 64 pages
[ 0.622352] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.623991] VFS: Disk quotas dquot_6.5.2
[ 0.624056] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.624656] fuse init (API version 7.12)
[ 0.624747] msgmni has been set to 1719
[ 0.624979] alg: No test for stdrng (krng)
[ 0.624990] io scheduler noop registered
[ 0.624992] io scheduler anticipatory registered
[ 0.624995] io scheduler deadline registered
[ 0.625046] io scheduler cfq registered (default)
[ 0.625059] pci 0000:00:02.0: Boot video device
[ 0.625363] alloc irq_desc for 24 on node -1
[ 0.625366] alloc kstat_irqs on node -1
[ 0.625378] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.625392] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.625550] alloc irq_desc for 25 on node -1
[ 0.625552] alloc kstat_irqs on node -1
[ 0.625562] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.625574] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.625731] alloc irq_desc for 26 on node -1
[ 0.625733] alloc kstat_irqs on node -1
[ 0.625743] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.625754] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.625872] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.625893] Firmware did not grant requested _OSC control
[ 0.625928] Firmware did not grant requested _OSC control
[ 0.625943] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.630237] ACPI: AC Adapter [C239] (on-line)
[ 0.630305] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.630308] ACPI: Power Button [PWRF]
[ 0.630388] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/i
nput1
[ 0.630391] ACPI: Sleep Button [C2BB]
[ 0.630438] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/inp
ut2
[ 0.630507] ACPI: Lid Switch [C153]
[ 0.630754] fan PNP0C0B:00: registered as cooling_device0
[ 0.630761] ACPI: Fan [C3BA] (off)
[ 0.630963] fan PNP0C0B:01: registered as cooling_device1
[ 0.630969] ACPI: Fan [C3BB] (off)
[ 0.631167] fan PNP0C0B:02: registered as cooling_device2
[ 0.631174] ACPI: Fan [C3BC] (off)
[ 0.631370] fan PNP0C0B:03: registered as cooling_device3
[ 0.631380] ACPI: Fan [C3BD] (off)
[ 0.631580] fan PNP0C0B:04: registered as cooling_device4
[ 0.631587] ACPI: Fan [C3BE] (off)
[ 0.632257] ACPI: SSDT 5f7db75e 0023D (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 0.632888] ACPI: SSDT 5f7dba20 004BA (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 0.635403] Monitor-Mwait will be used to enter C-1 state
[ 0.635428] Monitor-Mwait will be used to enter C-2 state
[ 0.635449] Monitor-Mwait will be used to enter C-3 state
[ 0.635458] Marking TSC unstable due to TSC halts in idle
[ 0.635480] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.635502] processor LNXCPU:00: registered as cooling_device5
[ 0.635507] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.635856] ACPI: SSDT 5f7db696 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 0.636354] ACPI: SSDT 5f7db99b 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 0.637560] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.637583] processor LNXCPU:01: registered as cooling_device6
[ 0.637587] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.654062] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.654072] ACPI: Thermal Zone [TZ0] (34 C)
[ 0.657825] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.657835] ACPI: Thermal Zone [TZ1] (35 C)
[ 0.661715] thermal LNXTHERM:03: registered as thermal_zone2
[ 0.661724] ACPI: Thermal Zone [TZ3] (21 C)
[ 0.670403] thermal LNXTHERM:04: registered as thermal_zone3
[ 0.670412] ACPI: Thermal Zone [TZ4] (20 C)
[ 0.674112] thermal LNXTHERM:05: registered as thermal_zone4
[ 0.674121] ACPI: Thermal Zone [TZ5] (75 C)
[ 0.674199] isapnp: Scanning for PnP cards...
[ 0.723596] ACPI: Battery Slot [C23B] (battery absent)
[ 0.723787] ACPI: Battery Slot [C23A] (battery absent)
[ 1.028572] isapnp: No Plug & Play device found
[ 1.029879] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.031420] brd: module loaded
[ 1.031924] loop: module loaded
[ 1.031995] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.032091] ahci 0000:00:1f.2: version 3.0
[ 1.032106] alloc irq_desc for 21 on node -1
[ 1.032108] alloc kstat_irqs on node -1
[ 1.032115] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 1.032149] alloc irq_desc for 27 on node -1
[ 1.032151] alloc kstat_irqs on node -1
[ 1.032161] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.032202] ahci: SSS flag set, parallel bus scan disabled
[ 1.032227] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA
mode
[ 1.032231] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
[ 1.032237] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.032352] scsi0 : ahci
[ 1.032444] scsi1 : ahci
[ 1.032507] scsi2 : ahci
[ 1.032578] ata1: SATA max UDMA/133 abar m2048 at 0xe4629000 port 0xe4629100 irq 27
[ 1.032581] ata2: DUMMY
[ 1.032583] ata3: DUMMY
[ 1.033606] Fixed MDIO Bus: probed
[ 1.033643] PPP generic driver version 2.4.2
[ 1.033731] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.033750] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.033761] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.033765] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.033814] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.037710] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.037718] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.037732] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4621000
[ 1.052019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.052096] usb usb1: configuration #1 chosen from 1 choice
[ 1.052128] hub 1-0:1.0: USB hub found
[ 1.052135] hub 1-0:1.0: 4 ports detected
[ 1.052201] alloc irq_desc for 20 on node -1
[ 1.052203] alloc kstat_irqs on node -1
[ 1.052208] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.052218] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.052222] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.052259] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.056173] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.056180] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.056194] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4628000
[ 1.072018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.072094] usb usb2: configuration #1 chosen from 1 choice
[ 1.072123] hub 2-0:1.0: USB hub found
[ 1.072129] hub 2-0:1.0: 6 ports detected
[ 1.072201] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.072221] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.072244] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.072251] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.072255] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.072287] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.072325] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004040
[ 1.072410] usb usb3: configuration #1 chosen from 1 choice
[ 1.072444] hub 3-0:1.0: USB hub found
[ 1.072452] hub 3-0:1.0: 2 ports detected
[ 1.072504] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.072511] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.072515] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.072546] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.072584] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004060
[ 1.072665] usb usb4: configuration #1 chosen from 1 choice
[ 1.072695] hub 4-0:1.0: USB hub found
[ 1.072702] hub 4-0:1.0: 2 ports detected
[ 1.072755] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.072762] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.072766] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.072797] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.072827] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004080
[ 1.072910] usb usb5: configuration #1 chosen from 1 choice
[ 1.072938] hub 5-0:1.0: USB hub found
[ 1.072944] hub 5-0:1.0: 2 ports detected
[ 1.072995] alloc irq_desc for 22 on node -1
[ 1.072997] alloc kstat_irqs on node -1
[ 1.073002] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.073010] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.073014] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.073051] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.073089] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000040a0
[ 1.073172] usb usb6: configuration #1 chosen from 1 choice
[ 1.073205] hub 6-0:1.0: USB hub found
[ 1.073211] hub 6-0:1.0: 2 ports detected
[ 1.073265] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.073273] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.073276] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.073308] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.073336] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040c0
[ 1.073420] usb usb7: configuration #1 chosen from 1 choice
[ 1.073447] hub 7-0:1.0: USB hub found
[ 1.073454] hub 7-0:1.0: 2 ports detected
[ 1.073567] PNP: PS/2 Controller [PNP0303:C29A,PNP0f13:C29B] at 0x60,0x64 irq 1,12
[ 1.075380] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.076104] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.076110] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.076113] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.076116] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.076119] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.076173] mice: PS/2 mouse device common for all mice
[ 1.076294] rtc_cmos 00:07: RTC can wake from S4
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
More information about the kernel-bugs
mailing list