[Bug 246141] Re: no support for realtek rtl8187se

mangouste06 gerard.bigot at gmail.com
Sun Oct 26 18:53:07 UTC 2008


I'm fully intrepid uptodate.

Yes, this driver compiles with zero error. And it works great.

But, once loaded with wlan0up, I'm flooded (as dmesg shows) with :

 1595.719670] rtl8180: Got last fragment
[ 1595.719674] rtl8180: yanked out crc, passing to the upper layer
[ 1595.727495] rtl8180: Alloc initial skb 76
[ 1595.727502] rtl8180: going to copy current payload 74
[ 1595.727507] rtl8180: current fragment skb copy complete
[ 1595.727511] rtl8180: Got last fragment
[ 1595.727515] rtl8180: yanked out crc, passing to the upper layer
[ 1595.754520] rtl8180: Alloc initial skb 6e
[ 1595.754529] rtl8180: going to copy current payload 6c
[ 1595.754536] rtl8180: current fragment skb copy complete
[ 1595.754542] rtl8180: Got last fragment
[ 1595.754548] rtl8180: yanked out crc, passing to the upper layer
[ 1595.755336] rtl8180: Alloc initial skb 10
[ 1595.755342] rtl8180: going to copy current payload e
[ 1595.755346] rtl8180: current fragment skb copy complete
[ 1595.755351] rtl8180: Got last fragment
[ 1595.755355] rtl8180: yanked out crc, passing to the upper layer
[ 1595.756857] rtl8180: Alloc initial skb 10
[ 1595.756863] rtl8180: going to copy current payload e
[ 1595.756868] rtl8180: current fragment skb copy complete
[ 1595.756872] rtl8180: Got last fragment
[ 1595.756876] rtl8180: yanked out crc, passing to the upper layer
[ 1595.764306] rtl8180: Alloc initial skb 5b
[ 1595.764313] rtl8180: going to copy current payload 59
[ 1595.764319] rtl8180: current fragment skb copy complete
[ 1595.764323] rtl8180: Got last fragment
[ 1595.764327] rtl8180: yanked out crc, passing to the upper layer
[ 1595.764710] rtl8180: Alloc initial skb 10
[ 1595.764715] rtl8180: going to copy current payload e
[ 1595.764720] rtl8180: current fragment skb copy complete
[ 1595.764724] rtl8180: Got last fragment
[ 1595.764728] rtl8180: yanked out crc, passing to the upper layer
[ 1595.772207] rtl8180: Alloc initial skb 76
[ 1595.772215] rtl8180: going to copy current payload 74
[ 1595.772220] rtl8180: current fragment skb copy complete

So, I'm back to the last driver in this bug report.

If I have time I'l try the version 2, before the backport ...

G.


On Sun, Oct 26, 2008 at 5:12 PM, Coffelius <coffelius at gmail.com> wrote:
> hi. if you have problems with authentication try with this fork of the driver
> http://msi-wind-linux.googlecode.com/files/rtl8187se_linux-03.tar.bz2
> let me know if it solved your problems. thanks
>
> Make and interface up with
> wget http://msi-wind-linux.googlecode.com/files/rtl8187se_linux-03.tar.bz2
> tar xvjf rtl8187se_linux-03.tar.bz2
> cd rtl8187se_coffee
> ./makedrv
> ./wlan0up
>
> Then, to install in boot for ubuntu:
> ./install
>
> --
> no support for realtek rtl8187se
> https://bugs.launchpad.net/bugs/246141
> You received this bug notification because you are a direct subscriber
> of the bug.
>

-- 
no support for realtek rtl8187se
https://bugs.launchpad.net/bugs/246141
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux-meta in ubuntu.




More information about the kernel-bugs mailing list