[Bug 198529] Re: USB wireless card activated with ndiswrapper receive only IPv6

livio livio.ribeiro at yahoo.com.br
Wed Mar 5 18:55:07 UTC 2008


ndiswrapper -v:

utils version: '1.9', utils version needed by module: '1.9'
module details:
filename:       /lib/modules/2.6.24-8-generic/ubuntu/misc/ndiswrapper/ndiswrapper.ko
version:        1.52
vermagic:       2.6.24-8-generic SMP mod_unload 586 

ndiswrapper -l:

wusb11v4 : driver installed
	device (13B1:000B) present

lsusb:

Bus 002 Device 002: ID 13b1:000b Linksys WUSB11 v4.0 802.11b Adapter
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 004: ID 10d6:1100 Actions Semiconductor Co., Ltd MPMan MP-Ki 128 MP3 Player/Recorder
Bus 001 Device 003: ID 05e3:0606 Genesys Logic, Inc. D-Link DUB-H4 USB 2.0 Hub
Bus 001 Device 001: ID 0000:0000  

dmesg

[    0.000000] Linux version 2.6.24-8-generic (buildd at rothera) (gcc version 4.2.3 (Ubuntu 4.2.3-1ubuntu2)) #1 SMP Thu Feb 14 20:40:45 UTC 2008 (Ubuntu 2.6.24-8.14-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000037ee0000 (usable)
[    0.000000]  BIOS-e820: 0000000037ee0000 - 0000000037ee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000037ee3000 - 0000000037ef0000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000037ef0000 - 0000000037f00000 (reserved)
[    0.000000]  BIOS-e820: 0000000038000000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 894MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f3a00
[    0.000000] Entering add_active_range(0, 0, 229088) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229088
[    0.000000]   HighMem    229088 ->   229088
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   229088
[    0.000000] On node 0 totalpages: 229088
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1757 pages used for memmap
[    0.000000]   Normal zone: 223235 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.2 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F7A10 checksum 0
[    0.000000] ACPI: RSDP 000F7A10, 0014 (r0 Nvidia)
[    0.000000] ACPI: RSDT 37EE3040, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
[    0.000000] ACPI: FACP 37EE30C0, 0074 (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
[    0.000000] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126]
[    0.000000] ACPI: DSDT 37EE3180, 6395 (r1 NVIDIA NVDAACPI     1000 MSFT  100000E)
[    0.000000] ACPI: FACS 37EE0000, 0040
[    0.000000] ACPI: SSDT 37EE9640, 0206 (r1 PTLTD  POWERNOW        1  LTP        1)
[    0.000000] ACPI: _HPT 37EE98C0, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA       98)
[    0.000000] ACPI: MCFG 37EE9940, 003C (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
[    0.000000] ACPI: APIC 37EE9580, 007C (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:11 APIC version 16
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:11 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227299
[    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- locale=pt_BR console-setup/layoutcode=br console-setup/modelcode=abnt2
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2109.721 MHz processor.
[   33.094217] spurious 8259A interrupt: IRQ7.
[   33.097160] Console: colour VGA+ 80x25
[   33.097163] console [tty0] enabled
[   33.097540] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   33.097926] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   33.111913] Memory: 896164k/916352k available (2161k kernel code, 19708k reserved, 997k data, 364k init, 0k highmem)
[   33.111920] virtual kernel memory layout:
[   33.111921]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   33.111922]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   33.111923]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   33.111924]     lowmem  : 0xc0000000 - 0xf7ee0000   ( 894 MB)
[   33.111926]       .init : 0xc041b000 - 0xc0476000   ( 364 kB)
[   33.111927]       .data : 0xc031c5ed - 0xc0415dc4   ( 997 kB)
[   33.111928]       .text : 0xc0100000 - 0xc031c5ed   (2161 kB)
[   33.111930] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   33.111958] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   33.191924] Calibrating delay using timer specific routine.. 4223.91 BogoMIPS (lpj=8447828)
[   33.191945] Security Framework initialized
[   33.191950] SELinux:  Disabled at boot.
[   33.191962] AppArmor: AppArmor initialized
[   33.191966] Failure registering capabilities with primary security module.
[   33.191973] Mount-cache hash table entries: 512
[   33.192070] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000
[   33.192078] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   33.192080] CPU: L2 Cache: 512K (64 bytes/line)
[   33.192083] CPU 0(2) -> Core 0
[   33.192084] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000
[   33.192092] Compat vDSO mapped to ffffe000.
[   33.192100] Checking 'hlt' instruction... OK.
[   33.208139] SMP alternatives: switching to UP code
[   33.209170] Early unpacking initramfs... done
[   33.503638] ACPI: Core revision 20070126
[   33.503708] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   33.506997] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
[   33.507015] SMP alternatives: switching to SMP code
[   33.507496] Booting processor 1/1 eip 3000
[   33.517542] Initializing CPU#1
[   33.595684] Calibrating delay using timer specific routine.. 4219.75 BogoMIPS (lpj=8439501)
[   33.595691] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000
[   33.595697] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   33.595699] CPU: L2 Cache: 512K (64 bytes/line)
[   33.595701] CPU 1(2) -> Core 1
[   33.595703] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000
[   33.595882] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
[   33.595894] Total of 2 processors activated (8443.66 BogoMIPS).
[   33.596130] ENABLING IO-APIC IRQs
[   33.596356] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[   33.743646] Brought up 2 CPUs
[   33.743694] CPU0 attaching sched-domain:
[   33.743696]  domain 0: span 03
[   33.743698]   groups: 01 02
[   33.743701] CPU1 attaching sched-domain:
[   33.743702]  domain 0: span 03
[   33.743704]   groups: 02 01
[   33.743888] net_namespace: 64 bytes
[   33.743894] Booting paravirtualized kernel on bare hardware
[   33.744300] Time: 15:23:38  Date: 03/05/08
[   33.744346] NET: Registered protocol family 16
[   33.744502] EISA bus registered
[   33.744506] ACPI: bus type pci registered
[   33.750182] PCI: PCI BIOS revision 3.00 entry at 0xfa7b0, last bus=4
[   33.750184] PCI: Using configuration type 1
[   33.750186] Setting up standard PCI resources
[   33.754537] ACPI: EC: Look up EC in DSDT
[   33.760074] ACPI: Interpreter enabled
[   33.760077] ACPI: (supports S0 S1 S3 S4 S5)
[   33.760090] ACPI: Using IOAPIC for interrupt routing
[   33.769037] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   33.769588] PCI: Transparent bridge - 0000:00:04.0
[   33.769762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   33.769980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   33.808775] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   33.808935] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   33.809093] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   33.809249] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   33.809406] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   33.809563] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   33.809720] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   33.809877] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   33.810037] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 *10 11 14 15)
[   33.810194] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   33.810353] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[   33.810511] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
[   33.810669] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[   33.810826] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   33.810985] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[   33.811142] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[   33.811299] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   33.811458] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[   33.811619] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   33.811809] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[   33.811991] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[   33.812173] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[   33.812353] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[   33.812535] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[   33.812716] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[   33.812896] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[   33.813077] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[   33.813258] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[   33.813441] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[   33.813622] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[   33.813804] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[   33.813986] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[   33.814168] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[   33.814349] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[   33.814531] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[   33.814713] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[   33.814899] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[   33.815081] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[   33.815202] Linux Plug and Play Support v0.97 (c) Adam Belay
[   33.815227] pnp: PnP ACPI init
[   33.815233] ACPI: bus type pnp registered
[   33.820417] pnpacpi: exceeded the max number of mem resources: 12
[   33.820474] pnp: PnP ACPI: found 14 devices
[   33.820476] ACPI: ACPI bus type pnp unregistered
[   33.820479] PnPBIOS: Disabled by ACPI PNP
[   33.820658] PCI: Using ACPI for IRQ routing
[   33.820662] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   33.887450] NET: Registered protocol family 8
[   33.887452] NET: Registered protocol family 20
[   33.887512] AppArmor: AppArmor Filesystem Enabled
[   33.899465] system 00:01: ioport range 0x1000-0x107f has been reserved
[   33.899467] system 00:01: ioport range 0x1080-0x10ff has been reserved
[   33.899470] system 00:01: ioport range 0x1400-0x147f has been reserved
[   33.899472] system 00:01: ioport range 0x1480-0x14ff has been reserved
[   33.899475] system 00:01: ioport range 0x1800-0x187f has been reserved
[   33.899477] system 00:01: ioport range 0x1880-0x18ff has been reserved
[   33.899480] system 00:01: ioport range 0x2000-0x207f has been reserved
[   33.899482] system 00:01: ioport range 0x2080-0x20ff has been reserved
[   33.899485] system 00:01: iomem range 0xfec80000-0xfecbffff could not be reserved
[   33.899488] system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved
[   33.899491] system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved
[   33.899493] system 00:01: iomem range 0x38000000-0x3fffffff could not be reserved
[   33.899498] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[   33.899501] system 00:02: ioport range 0x800-0x87f has been reserved
[   33.899503] system 00:02: ioport range 0x290-0x297 has been reserved
[   33.899512] system 00:0c: iomem range 0xf0000000-0xf3ffffff could not be reserved
[   33.899517] system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
[   33.899520] system 00:0d: iomem range 0xfeff0000-0xfeff00ff could not be reserved
[   33.899522] system 00:0d: iomem range 0x37ee0000-0x37efffff could not be reserved
[   33.899525] system 00:0d: iomem range 0xffff0000-0xffffffff could not be reserved
[   33.899528] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[   33.899530] system 00:0d: iomem range 0x100000-0x37edffff could not be reserved
[   33.899533] system 00:0d: iomem range 0x37f00000-0x3fefffff could not be reserved
[   33.899535] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[   33.899538] system 00:0d: iomem range 0xfee00000-0xfeefffff could not be reserved
[   33.899541] system 00:0d: iomem range 0xfefff000-0xfeffffff could not be reserved
[   33.899543] system 00:0d: iomem range 0xfff80000-0xfff80fff could not be reserved
[   33.899546] system 00:0d: iomem range 0xfff90000-0xfffbffff could not be reserved
[   33.929885] PCI: Bridge: 0000:00:04.0
[   33.929887]   IO window: c000-cfff
[   33.929891]   MEM window: fdf00000-fdffffff
[   33.929893]   PREFETCH window: fd800000-fd8fffff
[   33.929896] PCI: Bridge: 0000:00:09.0
[   33.929898]   IO window: b000-bfff
[   33.929900]   MEM window: fde00000-fdefffff
[   33.929902]   PREFETCH window: fdd00000-fddfffff
[   33.929904] PCI: Bridge: 0000:00:0b.0
[   33.929906]   IO window: a000-afff
[   33.929908]   MEM window: fdc00000-fdcfffff
[   33.929910]   PREFETCH window: fdb00000-fdbfffff
[   33.929913] PCI: Bridge: 0000:00:0c.0
[   33.929914]   IO window: 9000-9fff
[   33.929916]   MEM window: fda00000-fdafffff
[   33.929918]   PREFETCH window: fd900000-fd9fffff
[   33.929929] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   33.929937] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   33.929943] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   33.929949] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   33.929960] NET: Registered protocol family 2
[   33.931412] Time: acpi_pm clocksource has been installed.
[   33.931428] Switched to high resolution mode on CPU 0
[   33.931569] Switched to high resolution mode on CPU 1
[   33.967424] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   33.967691] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   33.968573] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   33.969051] TCP: Hash tables configured (established 131072 bind 65536)
[   33.969054] TCP reno registered
[   33.979485] checking if image is initramfs... it is
[   34.554276] Freeing initrd memory: 7597k freed
[   34.555097] audit: initializing netlink socket (disabled)
[   34.555111] audit(1204730618.344:1): initialized
[   34.556937] VFS: Disk quotas dquot_6.5.1
[   34.557001] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   34.557108] io scheduler noop registered
[   34.557110] io scheduler anticipatory registered
[   34.557112] io scheduler deadline registered
[   34.557120] io scheduler cfq registered (default)
[   34.571952] Boot video device is 0000:00:0d.0
[   34.572054] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   34.572074] assign_interrupt_mode Found MSI capability
[   34.572092] Allocate Port Service[0000:00:09.0:pcie00]
[   34.572148] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   34.572168] assign_interrupt_mode Found MSI capability
[   34.572181] Allocate Port Service[0000:00:0b.0:pcie00]
[   34.572234] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   34.572253] assign_interrupt_mode Found MSI capability
[   34.572266] Allocate Port Service[0000:00:0c.0:pcie00]
[   34.572466] isapnp: Scanning for PnP cards...
[   34.924859] isapnp: No Plug & Play device found
[   34.950721] Real Time Clock Driver v1.12ac
[   34.950833] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   34.950945] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   34.951479] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   34.952208] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   34.952270] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   34.952357] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   34.952709] serio: i8042 KBD port at 0x60,0x64 irq 1
[   34.952714] serio: i8042 AUX port at 0x60,0x64 irq 12
[   34.971674] mice: PS/2 mouse device common for all mice
[   34.971788] EISA: Probing bus 0 at eisa.0
[   34.971793] Cannot allocate resource for EISA slot 1
[   34.971795] Cannot allocate resource for EISA slot 2
[   34.971811] EISA: Detected 0 cards.
[   34.971814] cpuidle: using governor ladder
[   34.971816] cpuidle: using governor menu
[   34.971895] NET: Registered protocol family 1
[   34.971917] Using IPI No-Shortcut mode
[   34.971950] registered taskstats version 1
[   34.972041]   Magic number: 0:768:385
[   34.972449] Freeing unused kernel memory: 364k freed
[   34.992529] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   36.175879] fuse init (API version 7.9)
[   36.181359] ACPI: Fan [FAN] (on)
[   36.188272] ACPI: Thermal Zone [THRM] (37 C)
[   36.660969] usbcore: registered new interface driver usbfs
[   36.660994] usbcore: registered new interface driver hub
[   36.661662] SCSI subsystem initialized
[   36.662552] usbcore: registered new device driver usb
[   36.663145] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[   36.663504] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[   36.663513] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16
[   36.663519] PCI: Setting latency timer of device 0000:00:07.0 to 64
[   36.672059] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   36.672066] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   36.700783] libata version 3.00 loaded.
[   36.753276] Floppy drive(s): fd0 is 1.44M
[   36.773208] FDC 0 is a post-1991 82077
[   37.181245] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 00:1b:b9:62:c9:95
[   37.181250] forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim msi desc-v3
[   37.181366] NFORCE-MCP61: IDE controller (0x10de:0x03ec rev 0xa2) at  PCI slot 0000:00:06.0
[   37.181388] NFORCE-MCP61: not 100% native mode: will probe irqs later
[   37.181394] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
[   37.181400]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[   37.181407] NFORCE-MCP61: IDE port disabled
[   37.181410] Probing IDE interface ide0...
[   37.973224] hdb: TSSTcorpCD/DVDW SH-S182F, ATAPI CD/DVD-ROM drive
[   38.252902] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[   38.253042] hdb: UDMA/33 mode selected
[   38.253252] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   38.256264] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[   38.256276] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17
[   38.256288] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   38.256291] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   38.256579] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[   38.256607] ehci_hcd 0000:00:02.1: debug port 1
[   38.256611] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[   38.256621] ehci_hcd 0000:00:02.1: irq 17, io mem 0xfe02e000
[   38.267841] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   38.267945] usb usb1: configuration #1 chosen from 1 choice
[   38.267966] hub 1-0:1.0: USB hub found
[   38.267971] hub 1-0:1.0: 8 ports detected
[   38.373728] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   38.374095] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[   38.374105] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 18
[   38.374117] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   38.374120] ohci_hcd 0000:00:02.0: OHCI Host Controller
[   38.374149] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[   38.374167] ohci_hcd 0000:00:02.0: irq 18, io mem 0xfe02f000
[   38.429800] usb usb2: configuration #1 chosen from 1 choice
[   38.429825] hub 2-0:1.0: USB hub found
[   38.429832] hub 2-0:1.0: 8 ports detected
[   38.532102] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[   38.532115] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 19
[   38.532159] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   38.532170] ACPI: PCI interrupt for device 0000:00:08.0 disabled
[   38.542573] sata_nv 0000:00:08.0: version 3.5
[   38.542585] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 19
[   38.542627] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   38.544921] scsi0 : sata_nv
[   38.545816] scsi1 : sata_nv
[   38.545977] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 19
[   38.545980] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 19
[   38.851366] usb 1-3: new high speed USB device using ehci_hcd and address 3
[   38.984573] usb 1-3: configuration #1 chosen from 1 choice
[   38.984897] hub 1-3:1.0: USB hub found
[   38.985128] hub 1-3:1.0: 4 ports detected
[   39.015236] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   39.023481] ata1.00: ATA-8: SAMSUNG HD161HJ, GF100-07, max UDMA7
[   39.023485] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   39.031466] ata1.00: configured for UDMA/133
[   39.342963] ata2: SATA link down (SStatus 0 SControl 300)
[   39.353313] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD161HJ  GF10 PQ: 0 ANSI: 5
[   39.359034] Driver 'sd' needs updating - please use bus_type methods
[   39.359119] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   39.359131] sd 0:0:0:0: [sda] Write Protect is off
[   39.359133] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   39.359149] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   39.359190] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   39.359198] sd 0:0:0:0: [sda] Write Protect is off
[   39.359200] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   39.359214] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   39.359217]  sda: sda1 sda2 sda3
[   39.368393] hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[   39.368400] Uniform CD-ROM driver Revision: 3.20
[   39.376299] sd 0:0:0:0: [sda] Attached SCSI disk
[   39.380361] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   39.391975] usb 2-2: new full speed USB device using ohci_hcd and address 2
[   39.602970] usb 2-2: configuration #1 chosen from 1 choice
[   50.291596] end_request: I/O error, dev fd0, sector 0
[   62.448817] end_request: I/O error, dev fd0, sector 0
[   62.448821] Buffer I/O error on device fd0, logical block 0
[   74.602409] end_request: I/O error, dev fd0, sector 0
[   74.602412] Buffer I/O error on device fd0, logical block 0
[   87.780721] end_request: I/O error, dev fd0, sector 0
[   99.937865] end_request: I/O error, dev fd0, sector 0
[   99.937869] Buffer I/O error on device fd0, logical block 0
[  112.088031] end_request: I/O error, dev fd0, sector 0
[  112.088034] Buffer I/O error on device fd0, logical block 0
[  114.177926] ISO 9660 Extensions: Microsoft Joliet Level 3
[  114.244348] ISO 9660 Extensions: RRIP_1991A
[  114.532423] Registering unionfs 1.4
[  114.532427] unionfs: debugging is not enabled
[  114.541157] loop: module loaded
[  114.807499] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[  157.669856] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[  157.669879] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400
[  158.856025] input: PC Speaker as /devices/platform/pcspkr/input/input2
[  159.021714] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  159.222708] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  159.396816] input: Power Button (FF) as /devices/virtual/input/input3
[  159.428064] ACPI: Power Button (FF) [PWRF]
[  159.428139] input: Power Button (CM) as /devices/virtual/input/input4
[  159.440043] ACPI: Power Button (CM) [PWRB]
[  159.455626] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[  159.773414] Linux agpgart interface v0.102
[  160.003861] parport_pc 00:09: reported by Plug and Play ACPI
[  160.003914] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[  160.618835] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[  160.618841] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 16
[  160.618865] PCI: Setting latency timer of device 0000:00:05.0 to 64
[  162.275256] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 across:1951888k
[  162.879628] ip_tables: (C) 2000-2006 Netfilter Core Team
[  164.228897] No dock devices found.
[  164.351073] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[  165.616975] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (2 cpu cores) (version 2.20.00)
[  165.616926] powernow-k8:    0 : fid 0xd (2100 MHz), vid 0xa
[  165.616931] powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xb
[  165.616933] powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xd
[  165.616935] powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
[  167.850816] NET: Registered protocol family 10
[  167.851053] lo: Disabled Privacy Extensions
[  167.969551] lp0: using parport0 (interrupt-driven).
[  168.019464] ppdev: user-space parallel port driver
[  170.166776] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[  170.166784] apm: disabled - APM is not SMP safe.
[  171.752979] Clocksource tsc unstable (delta = -64969900 ns)
[  172.697612] eth0: no link during initialization.
[  172.698807] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  172.855310] Bluetooth: Core ver 2.11
[  172.855371] NET: Registered protocol family 31
[  172.855373] Bluetooth: HCI device and connection manager initialized
[  172.855379] Bluetooth: HCI socket layer initialized
[  172.913679] Bluetooth: L2CAP ver 2.9
[  172.913684] Bluetooth: L2CAP socket layer initialized
[  172.916770] Bluetooth: RFCOMM socket layer initialized
[  172.916783] Bluetooth: RFCOMM TTY layer initialized
[  172.916784] Bluetooth: RFCOMM ver 1.8
[  215.778353] usb 1-3.1: new full speed USB device using ehci_hcd and address 4
[  215.823273] usb 1-3.1: configuration #1 chosen from 1 choice
[  216.316599] usbcore: registered new interface driver libusual
[  216.334388] Initializing USB Mass Storage driver...
[  216.343152] scsi2 : SCSI emulation for USB Mass Storage devices
[  216.343250] usb-storage: device found at 4
[  216.343254] usb-storage: waiting for device to settle before scanning
[  216.343360] usbcore: registered new interface driver usb-storage
[  216.343363] USB Mass Storage support registered.
[  218.720718] usb-storage: device scan complete
[  218.720894] scsi scan: INQUIRY result too short (5), using 36
[  218.720900] scsi 2:0:0:0: Direct-Access     USB2.0   (FS) FLASH DISK  1.00 PQ: 0 ANSI: 0 CCS
[  218.721595] sd 2:0:0:0: [sdb] 503521 512-byte hardware sectors (258 MB)
[  218.721953] sd 2:0:0:0: [sdb] Write Protect is off
[  218.721958] sd 2:0:0:0: [sdb] Mode Sense: 00 c0 00 00
[  218.721960] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  218.722845] sd 2:0:0:0: [sdb] 503521 512-byte hardware sectors (258 MB)
[  218.723197] sd 2:0:0:0: [sdb] Write Protect is off
[  218.723200] sd 2:0:0:0: [sdb] Mode Sense: 00 c0 00 00
[  218.723202] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  218.723206]  sdb: unknown partition table
[  218.734754] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[  218.735237] sd 2:0:0:0: Attached scsi generic sg1 type 0
[  302.504576] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[  302.600071] usb 2-2: reset full speed USB device using ohci_hcd and address 2
[  302.704522] ndiswrapper: driver wusb11v4 (Linksys, A Division of Cisco Systems, Inc.,12/16/2004, 3.112.1216.2004) loaded
[  303.255530] wlan0: ethernet device 00:12:17:a4:e7:e5 using NDIS driver: wusb11v4, version: 0x370, NDIS version: 0x501, vendor: 'M4301 NDIS Miniport Driver', 13B1:000B.F.conf
[  303.256994] wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
[  303.257501] usbcore: registered new interface driver ndiswrapper
[  304.028732] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  309.154734] wlan0: no IPv6 routers present
[  439.678480] eth0: no link during initialization.
[  439.679662] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  444.549665] wlan0: no IPv6 routers present
[  452.231951] NET: Registered protocol family 17

ifconfig wlan0:

wlan0     Link encap:Ethernet  HWaddr 00:12:17:a4:e7:e5  
          inet6 addr: fe80::212:17ff:fea4:e7e5/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:76 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:12231 (11.9 KB)

-- 
USB wireless card activated with ndiswrapper receive only IPv6
https://bugs.launchpad.net/bugs/198529
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to ndiswrapper in ubuntu.




More information about the kernel-bugs mailing list