[Bug 54273] Re: USB device not accepting address: error -110

[Meltedfusion]

I too have the same usb issue. I have a toshiba laptop running 8.04 LTS
64 bit edition not only does my wifi not work but the 4 USB ports do not
work with my thumb drive or mobile phone. However i have a built in USB
camera that seems to be recognized. The Dmsg is as follows:

  395.053061] APIC error on CPU1: 00(40)
[  395.053830] APIC error on CPU0: 00(40)
[  680.494599] usb 1-1: new high speed USB device using ehci_hcd and address 5
[  686.874851] usb 1-2: new high speed USB device using ehci_hcd and address 6
[  692.442643] usb 1-3: new high speed USB device using ehci_hcd and address 7
[  700.383035] usb 1-3: device descriptor read/64, error -110
[  707.197979] usb 1-3: device descriptor read/64, error -110
[  707.276424] usb 1-3: new high speed USB device using ehci_hcd and address 8
[  713.971754] usb 1-3: device descriptor read/64, error -110
[  720.577415] usb 1-3: device descriptor read/64, error -110
[  720.655849] usb 1-3: new high speed USB device using ehci_hcd and address 9
[  724.444208] usb 1-3: device not accepting address 9, error -110
[  724.484889] usb 1-3: new high speed USB device using ehci_hcd and address 10
[  730.422046] usb 1-3: device not accepting address 10, error -110
[  744.426693] APIC error on CPU1: 40(40)
[  744.428187] APIC error on CPU0: 40(40)
[  883.423210] APIC error on CPU0: 40(40)
[  883.421546] APIC error on CPU1: 40(40)
[  953.627798] APIC error on CPU1: 40(40)
[  953.629581] APIC error on CPU0: 40(40)

As i started looking through the dmseg i noticed this...

 libata version 3.00 loaded.
[   22.690860] usbcore: registered new device driver usb
[   22.690938] ahci 0000:00:12.0: version 3.0
[   22.690974] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
[   22.691200] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[   22.691206] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
[   22.693798] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   23.690280] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode

Im green to this so please excuse me if i put info in there that
shouldnt be there.

The USB ports on my desktop seem to work fine front and back. I am
running 8.04 LTS x86 on there and everything seems to be running fine.
I'm going to try that on here and if it works i will post the update.

-- 
USB device not accepting address: error -110
https://bugs.launchpad.net/bugs/54273
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux-source-2.6.15 in ubuntu.