[Bug 21412] Re: Default update-grub behaviour is not intuitive with respect to user modifications
Matt Zimmerman
mdz at ubuntu.com
Tue Jan 29 09:36:12 UTC 2008
On Tue, Jan 29, 2008 at 12:07:01AM -0000, Steve Langasek wrote:
> In my pre-upload tests, I did not find that the first upgrade to
> 0.97-29ubuntu7 triggered a ucf prompt except in the case where there was
> already a detectable difference between the magic comments and the
> kernel list. This is AFAICS a necessary evil in order to get the
> current state of the config file registered with ucf; waiting until the
> first kernel upgrade only increases the chances of a ucf prompt that
> might have oterwise been avoided, but it should not result in any
> prompts where the menu.lst has not been locally modified. Can you
> provide a copy of a menu.lst that results in a prompt when you think it
> shouldn't?
Attached are /boot/grub/menu.lst and /boot/grub/menu.lst~. Assuming this is
the backup from ucf, this should be what you need. Notice that all of the
"kernel" lines are unmodified.
I saw exactly the same behaviour on both my desktop and my laptop upon
upgrading to this version of grub. The laptop was a fresh 7.10 install
upgraded to Hardy, with very little customization.
--
- mdz
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu hardy (development branch), kernel 2.6.24-5-generic Default
root (hd0,0)
kernel /boot/vmlinuz root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash
initrd /boot/initrd.img
quiet
title Ubuntu hardy (development branch), kernel 2.6.24-5-generic Default (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single
initrd /boot/initrd.img
title Ubuntu hardy (development branch), kernel 2.6.24-4-generic Previous
root (hd0,0)
kernel /boot/vmlinuz.old root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash
initrd /boot/initrd.img.old
quiet
title Ubuntu hardy (development branch), kernel 2.6.24-4-generic Previous (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz.old root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single
initrd /boot/initrd.img.old
title Ubuntu hardy (development branch), kernel 2.6.24-5-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-5-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash
initrd /boot/initrd.img-2.6.24-5-generic
quiet
title Ubuntu hardy (development branch), kernel 2.6.24-5-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-5-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single
initrd /boot/initrd.img-2.6.24-5-generic
title Ubuntu hardy (development branch), kernel 2.6.24-4-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-4-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash
initrd /boot/initrd.img-2.6.24-4-generic
quiet
title Ubuntu hardy (development branch), kernel 2.6.24-4-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-4-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single
initrd /boot/initrd.img-2.6.24-4-generic
title Ubuntu hardy (development branch), kernel 2.6.24-3-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-3-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash
initrd /boot/initrd.img-2.6.24-3-generic
quiet
title Ubuntu hardy (development branch), kernel 2.6.24-3-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-3-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single
initrd /boot/initrd.img-2.6.24-3-generic
title Ubuntu hardy (development branch), kernel 2.6.24-2-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-2-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash
initrd /boot/initrd.img-2.6.24-2-generic
quiet
title Ubuntu hardy (development branch), kernel 2.6.24-2-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-2-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single
initrd /boot/initrd.img-2.6.24-2-generic
title Ubuntu hardy (development branch), memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu hardy (development branch), kernel 2.6.24-4-generic Default
root (hd0,0)
kernel /boot/vmlinuz root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash
initrd /boot/initrd.img
quiet
title Ubuntu hardy (development branch), kernel 2.6.24-4-generic Default (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single
initrd /boot/initrd.img
title Ubuntu hardy (development branch), kernel 2.6.24-3-generic Previous
root (hd0,0)
kernel /boot/vmlinuz.old root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash
initrd /boot/initrd.img.old
quiet
title Ubuntu hardy (development branch), kernel 2.6.24-3-generic Previous (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz.old root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single
initrd /boot/initrd.img.old
title Ubuntu hardy (development branch), kernel 2.6.24-4-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-4-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash
initrd /boot/initrd.img-2.6.24-4-generic
quiet
title Ubuntu hardy (development branch), kernel 2.6.24-4-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-4-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single
initrd /boot/initrd.img-2.6.24-4-generic
title Ubuntu hardy (development branch), kernel 2.6.24-3-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-3-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash
initrd /boot/initrd.img-2.6.24-3-generic
quiet
title Ubuntu hardy (development branch), kernel 2.6.24-3-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-3-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single
initrd /boot/initrd.img-2.6.24-3-generic
title Ubuntu hardy (development branch), kernel 2.6.24-2-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-2-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash
initrd /boot/initrd.img-2.6.24-2-generic
quiet
title Ubuntu hardy (development branch), kernel 2.6.24-2-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-2-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single
initrd /boot/initrd.img-2.6.24-2-generic
title Ubuntu hardy (development branch), memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
--
Default update-grub behaviour is not intuitive with respect to user modifications
https://bugs.launchpad.net/bugs/21412
You received this bug notification because you are a member of Kernel
Bugs, which is a direct subscriber.
More information about the kernel-bugs
mailing list