From g2g591 at gmail.com Tue Jan 1 05:12:12 2008 From: g2g591 at gmail.com (Kyle Elbert) Date: Tue, 01 Jan 2008 05:12:12 -0000 Subject: [Bug 38908] Re: kernel panic on boot References: <20060409172100.24516.31977.malonedeb@gangotri.ubuntu.com> Message-ID: <20080101051212.15719.5801.malone@gangotri.ubuntu.com> rather old and TheCliftser never gave more details ** Changed in: debian-installer (Ubuntu) Status: New => Invalid ** Changed in: debian-installer (Ubuntu) Assignee: (unassigned) => Kyle Elbert (g2g591) -- kernel panic on boot https://bugs.launchpad.net/bugs/38908 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From yolabingo at gmail.com Tue Jan 1 20:27:47 2008 From: yolabingo at gmail.com (Todd Jacobsen) Date: Tue, 01 Jan 2008 20:27:47 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080101202747.21858.69195.malone@gangotri.ubuntu.com> I am experiencing this issue with my laptop (Toshiba Satellite A215-S7422) as well. Also experiencing intermittent slowdown/lockup type issues. Not sure if there's a correlation. Thanks! ** Attachment added: "dmesg.txt" http://launchpadlibrarian.net/11112275/dmesg.txt -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From yolabingo at gmail.com Tue Jan 1 20:28:21 2008 From: yolabingo at gmail.com (Todd Jacobsen) Date: Tue, 01 Jan 2008 20:28:21 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080101202821.28909.95556.malone@potassium.ubuntu.com> ** Attachment added: "lspci.txt" http://launchpadlibrarian.net/11112279/lspci.txt -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From yolabingo at gmail.com Tue Jan 1 20:29:50 2008 From: yolabingo at gmail.com (Todd Jacobsen) Date: Tue, 01 Jan 2008 20:29:50 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080101202950.21858.84563.malone@gangotri.ubuntu.com> Oops - forgot to mention: $ uname -a Linux 2.6.22-14-generic #1 SMP Tue Dec 18 08:02:57 UTC 2007 i686 GNU/Linux ** Attachment added: "lspci-n.txt" http://launchpadlibrarian.net/11112286/lspci-n.txt -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From erik.andren at gmail.com Tue Jan 1 20:40:24 2008 From: erik.andren at gmail.com (=?utf-8?q?Erik_Andr=C3=A9n?=) Date: Tue, 01 Jan 2008 20:40:24 -0000 Subject: [Bug 34155] Re: sleep and hibernate don't work on Dell C640 (regression from breezy) References: <20060308232941.29403.57547.malonedeb@gangotri.ubuntu.com> Message-ID: <20080101204024.8787.10103.malone@gandwana.ubuntu.com> DavidYerger, I installed your initrd and checked that it was successfully loaded, unfortunately it still doesn't work. Suspending once usually works but the second suspend ends in the same failure as stated before. -- sleep and hibernate don't work on Dell C640 (regression from breezy) https://bugs.launchpad.net/bugs/34155 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From michael at doube.net Tue Jan 1 20:48:28 2008 From: michael at doube.net (Michael Doube) Date: Tue, 01 Jan 2008 20:48:28 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080101204828.8787.42775.malone@gandwana.ubuntu.com> I get this on a Sony Vaio SZ650N, Hardy alpha-2: [ 17.424051] pnpacpi: exceeded the max number of IRQ resources: 2 [ 17.424105] pnpacpi: exceeded the max number of IRQ resources: 2 [ 17.424156] pnpacpi: exceeded the max number of IRQ resources: 2 [ 17.424207] pnpacpi: exceeded the max number of IRQ resources: 2 [ 17.424259] pnpacpi: exceeded the max number of IRQ resources: 2 [ 17.428097] pnp: PnP ACPI: found 12 devices [ 17.428099] ACPI: ACPI bus type pnp unregistered [ 17.428277] PCI: Using ACPI for IRQ routing (goes quite fast so I'm not sure if the last couple of lines are displayed) -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From michael at doube.net Tue Jan 1 20:51:12 2008 From: michael at doube.net (Michael Doube) Date: Tue, 01 Jan 2008 20:51:12 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080101205112.8884.20724.malone@gandwana.ubuntu.com> ** Attachment added: "dmesg.log" http://launchpadlibrarian.net/11112348/dmesg.log -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From michael at doube.net Tue Jan 1 20:51:45 2008 From: michael at doube.net (Michael Doube) Date: Tue, 01 Jan 2008 20:51:45 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080101205145.21953.84923.malone@gangotri.ubuntu.com> ** Attachment added: "acpidump.log" http://launchpadlibrarian.net/11112350/acpidump.log -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From michael at doube.net Tue Jan 1 20:52:25 2008 From: michael at doube.net (Michael Doube) Date: Tue, 01 Jan 2008 20:52:25 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080101205225.29009.43282.malone@potassium.ubuntu.com> ** Attachment added: "lspci-vvnn.log" http://launchpadlibrarian.net/11112352/lspci-vvnn.log -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From michael at doube.net Tue Jan 1 20:52:50 2008 From: michael at doube.net (Michael Doube) Date: Tue, 01 Jan 2008 20:52:50 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080101205250.8884.39931.malone@gandwana.ubuntu.com> ** Attachment added: "uname-a.log" http://launchpadlibrarian.net/11112354/uname-a.log -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From michael at doube.net Tue Jan 1 20:53:20 2008 From: michael at doube.net (Michael Doube) Date: Tue, 01 Jan 2008 20:53:20 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080101205320.8787.59714.malone@gandwana.ubuntu.com> ** Attachment added: "version.log" http://launchpadlibrarian.net/11112356/version.log -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From erik.andren at gmail.com Tue Jan 1 20:51:38 2008 From: erik.andren at gmail.com (=?utf-8?q?Erik_Andr=C3=A9n?=) Date: Tue, 01 Jan 2008 20:51:38 -0000 Subject: [Bug 34155] Re: sleep and hibernate don't work on Dell C640 References: <20060308232941.29403.57547.malonedeb@gangotri.ubuntu.com> Message-ID: <20080101205138.8884.63117.launchpad@gandwana.ubuntu.com> ** Summary changed: - sleep and hibernate don't work on Dell C640 (regression from breezy) + sleep and hibernate don't work on Dell C640 ** Summary changed: - sleep and hibernate don't work on Dell C640 + Suspend-To-Ram (S3) doesn't work on Dell Latitude C640 -- Suspend-To-Ram (S3) doesn't work on Dell Latitude C640 https://bugs.launchpad.net/bugs/34155 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From yolabingo at gmail.com Tue Jan 1 22:00:17 2008 From: yolabingo at gmail.com (Todd Jacobsen) Date: Tue, 01 Jan 2008 22:00:17 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080101220017.21858.46047.malone@gangotri.ubuntu.com> Tried booting with linux-image-2.6.24-2-generic. Did not seem to change anything for me either. dmesg attached ** Attachment added: "dmesg.txt" http://launchpadlibrarian.net/11112762/dmesg.txt -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From lxtanner at gmail.com Wed Jan 2 05:44:43 2008 From: lxtanner at gmail.com (Alex Tanner) Date: Wed, 02 Jan 2008 05:44:43 -0000 Subject: [Bug 39414] Re: syslog is flooded with messages after connecting bluetooth usb dongle References: <20060413092856.13165.25179.malonedeb@gandwana.ubuntu.com> Message-ID: <20080102054443.8884.13591.malone@gandwana.ubuntu.com> I have the same problem with my "Blue Soleil" Bluetooth dongle (Vendor:Device = 0e5e:6622). I've found you can suppress generation of the messages by changing the "isoc" parameter passed to the "hci_usb" kernel module. Depending on distro, you might put "hci_usb isoc=" in '/etc/modules' or "options hci_usb isoc=". For me, "isoc=3" causes "connection handle 92" errors. This method can only be considered a workaround, as non-optimal "isoc" values may have undesirable effects on hardware. I think the problem would be best cured by the designers of the "hci_usb" module consigning the detection of "connection handle" errors to the debug mode of that module. On my system, "modinfo hci_usb" shows, in the "description" field, that I am using "Bluetooth HCI USB driver ver 2.9". It is THIS version, not the kernel version that is important in this "bug", as "hci_usb" is spewing out messages to the syslog. Just for the record, my kernel version is 2.6.16.13 -- syslog is flooded with messages after connecting bluetooth usb dongle https://bugs.launchpad.net/bugs/39414 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From lxtanner at gmail.com Wed Jan 2 05:45:12 2008 From: lxtanner at gmail.com (Alex Tanner) Date: Wed, 02 Jan 2008 05:45:12 -0000 Subject: [Bug 39414] Re: syslog is flooded with messages after connecting bluetooth usb dongle References: <20060413092856.13165.25179.malonedeb@gandwana.ubuntu.com> Message-ID: <20080102054512.21953.91030.malone@gangotri.ubuntu.com> I have the same problem with my "Blue Soleil" Bluetooth dongle (Vendor:Device = 0e5e:6622). I've found you can suppress generation of the messages by changing the "isoc" parameter passed to the "hci_usb" kernel module. Depending on distro, you might put "hci_usb isoc=" in '/etc/modules' or "options hci_usb isoc=". For me, "isoc=3" causes "connection handle 92" errors. This method can only be considered a workaround, as non-optimal "isoc" values may have undesirable effects on hardware. I think the problem would be best cured by the designers of the "hci_usb" module consigning the detection of "connection handle" errors to the debug mode of that module. On my system, "modinfo hci_usb" shows, in the "description" field, that I am using "Bluetooth HCI USB driver ver 2.9". It is THIS version, not the kernel version that is important in this "bug", as "hci_usb" is spewing out messages to the syslog. Just for the record, my kernel version is 2.6.16.13 -- syslog is flooded with messages after connecting bluetooth usb dongle https://bugs.launchpad.net/bugs/39414 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From lxtanner at gmail.com Wed Jan 2 05:45:50 2008 From: lxtanner at gmail.com (Alex Tanner) Date: Wed, 02 Jan 2008 05:45:50 -0000 Subject: [Bug 39414] Re: syslog is flooded with messages after connecting bluetooth usb dongle References: <20060413092856.13165.25179.malonedeb@gandwana.ubuntu.com> Message-ID: <20080102054550.21858.71056.malone@gangotri.ubuntu.com> I have the same problem with my "Blue Soleil" Bluetooth dongle (Vendor:Device = 0e5e:6622). I've found you can suppress generation of the messages by changing the "isoc" parameter passed to the "hci_usb" kernel module. Depending on distro, you might put "hci_usb isoc=" in '/etc/modules' or "options hci_usb isoc=". For me, "isoc=3" causes "connection handle 92" errors. This method can only be considered a workaround, as non-optimal "isoc" values may have undesirable effects on hardware. I think the problem would be best cured by the designers of the "hci_usb" module consigning the detection of "connection handle" errors to the debug mode of that module. On my system, "modinfo hci_usb" shows, in the "description" field, that I am using "Bluetooth HCI USB driver ver 2.9". It is THIS version, not the kernel version that is important in this "bug", as "hci_usb" is spewing out messages to the syslog. Just for the record, my kernel version is 2.6.16.13 -- syslog is flooded with messages after connecting bluetooth usb dongle https://bugs.launchpad.net/bugs/39414 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From lxtanner at gmail.com Wed Jan 2 05:45:56 2008 From: lxtanner at gmail.com (Alex Tanner) Date: Wed, 02 Jan 2008 05:45:56 -0000 Subject: [Bug 39414] Re: syslog is flooded with messages after connecting bluetooth usb dongle References: <20060413092856.13165.25179.malonedeb@gandwana.ubuntu.com> Message-ID: <20080102054556.1978.56916.malone@potassium.ubuntu.com> I have the same problem with my "Blue Soleil" Bluetooth dongle (Vendor:Device = 0e5e:6622). I've found you can suppress generation of the messages by changing the "isoc" parameter passed to the "hci_usb" kernel module. Depending on distro, you might put "hci_usb isoc=" in '/etc/modules' or "options hci_usb isoc=". For me, "isoc=3" causes "connection handle 92" errors. This method can only be considered a workaround, as non-optimal "isoc" values may have undesirable effects on hardware. I think the problem would be best cured by the designers of the "hci_usb" module consigning the detection of "connection handle" errors to the debug mode of that module. On my system, "modinfo hci_usb" shows, in the "description" field, that I am using "Bluetooth HCI USB driver ver 2.9". It is THIS version, not the kernel version that is important in this "bug", as "hci_usb" is spewing out messages to the syslog. Just for the record, my kernel version is 2.6.16.13 -- syslog is flooded with messages after connecting bluetooth usb dongle https://bugs.launchpad.net/bugs/39414 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From lxtanner at gmail.com Wed Jan 2 05:46:38 2008 From: lxtanner at gmail.com (Alex Tanner) Date: Wed, 02 Jan 2008 05:46:38 -0000 Subject: [Bug 39414] Re: syslog is flooded with messages after connecting bluetooth usb dongle References: <20060413092856.13165.25179.malonedeb@gandwana.ubuntu.com> Message-ID: <20080102054638.1978.54207.malone@potassium.ubuntu.com> I have the same problem with my "Blue Soleil" Bluetooth dongle (Vendor:Device = 0e5e:6622). I've found you can suppress generation of the messages by changing the "isoc" parameter passed to the "hci_usb" kernel module. Depending on distro, you might put "hci_usb isoc=" in '/etc/modules' or "options hci_usb isoc=". For me, "isoc=3" causes "connection handle 92" errors. This method can only be considered a workaround, as non-optimal "isoc" values may have undesirable effects on hardware. I think the problem would be best cured by the designers of the "hci_usb" module consigning the detection of "connection handle" errors to the debug mode of that module. On my system, "modinfo hci_usb" shows, in the "description" field, that I am using "Bluetooth HCI USB driver ver 2.9". It is THIS version, not the kernel version that is important in this "bug", as "hci_usb" is spewing out messages to the syslog. Just for the record, my kernel version is 2.6.16.13 -- syslog is flooded with messages after connecting bluetooth usb dongle https://bugs.launchpad.net/bugs/39414 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From lxtanner at gmail.com Wed Jan 2 05:47:35 2008 From: lxtanner at gmail.com (Alex Tanner) Date: Wed, 02 Jan 2008 05:47:35 -0000 Subject: [Bug 39414] Re: syslog is flooded with messages after connecting bluetooth usb dongle References: <20060413092856.13165.25179.malonedeb@gandwana.ubuntu.com> Message-ID: <20080102054735.8787.9279.malone@gandwana.ubuntu.com> I have the same problem with my "Blue Soleil" Bluetooth dongle (Vendor:Device = 0e5e:6622). I've found you can suppress generation of the messages by changing the "isoc" parameter passed to the "hci_usb" kernel module. Depending on distro, you might put "hci_usb isoc=" in '/etc/modules' or "options hci_usb isoc=". For me, "isoc=3" causes "connection handle 92" errors. This method can only be considered a workaround, as non-optimal "isoc" values may have undesirable effects on hardware. I think the problem would be best cured by the designers of the "hci_usb" module consigning the detection of "connection handle" errors to the debug mode of that module. On my system, "modinfo hci_usb" shows, in the "description" field, that I am using "Bluetooth HCI USB driver ver 2.9". It is THIS version, not the kernel version that is important in this "bug", as "hci_usb" is spewing out messages to the syslog. Just for the record, my kernel version is 2.6.16.13 -- syslog is flooded with messages after connecting bluetooth usb dongle https://bugs.launchpad.net/bugs/39414 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From lxtanner at gmail.com Wed Jan 2 05:52:01 2008 From: lxtanner at gmail.com (Alex Tanner) Date: Wed, 02 Jan 2008 05:52:01 -0000 Subject: [Bug 39414] Re: syslog is flooded with messages after connecting bluetooth usb dongle References: <20060413092856.13165.25179.malonedeb@gandwana.ubuntu.com> Message-ID: <20080102055201.8884.78470.malone@gandwana.ubuntu.com> Correction: In my last post, I meant to specify that the line "options hci_usb isoc=", if used, should be added to '/etc/modprobe.conf'. -- syslog is flooded with messages after connecting bluetooth usb dongle https://bugs.launchpad.net/bugs/39414 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From lxtanner at gmail.com Wed Jan 2 06:05:15 2008 From: lxtanner at gmail.com (Alex Tanner) Date: Wed, 02 Jan 2008 06:05:15 -0000 Subject: [Bug 39414] Re: syslog is flooded with messages after connecting bluetooth usb dongle References: <20060413092856.13165.25179.malonedeb@gandwana.ubuntu.com> Message-ID: <20080102060515.1924.15578.malone@potassium.ubuntu.com> Here is the output of running "lsusb -v" on my machine, with the BlueSoleil USB bluetooth dongle (Vendor:Device 0e5e:6622) inserted. ** Attachment added: "lsusb -v Output" http://launchpadlibrarian.net/11115756/lsusb_v.txt -- syslog is flooded with messages after connecting bluetooth usb dongle https://bugs.launchpad.net/bugs/39414 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From bugwatch at bugs.launchpad.net Wed Jan 2 10:21:20 2008 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 02 Jan 2008 10:21:20 -0000 Subject: [Bug 36885] Re: Asus laptop hangs on TFT/VGA video switch (Fn-F8) References: <20060327182219.6279.42415.malonedeb@gandwana.ubuntu.com> Message-ID: <20080102102153.10856.24613.launchpad@forster.canonical.com> ** Changed in: linux Status: Confirmed => Incomplete -- Asus laptop hangs on TFT/VGA video switch (Fn-F8) https://bugs.launchpad.net/bugs/36885 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From jan.ceuleers at computer.org Wed Jan 2 12:55:59 2008 From: jan.ceuleers at computer.org (JanCeuleers) Date: Wed, 02 Jan 2008 12:55:59 -0000 Subject: [Bug 70507] Re: Xubuntu installer does not detect 3com 3c509 ISA ethernet card References: <20061105231250.31933.84076.malonedeb@gandwana.ubuntu.com> Message-ID: <20080102125559.8787.98720.malone@gandwana.ubuntu.com> This bug is still present in the Gutsy installer. Workaround: when the error message comes up saying that no networking hardware has been detected, press Ctrl-Alt-F2 in order to switch to another tty. Press enter to activate it. Enter the command "modprobe 3c509". Verify that the module has indeed been loaded using lsmod. Switch back to the installer by pressing Ctrl-Alt-F1. Ignore the error message and proceed with configuring the network. Worked for me. -- Xubuntu installer does not detect 3com 3c509 ISA ethernet card https://bugs.launchpad.net/bugs/70507 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From kevredon at gmail.com Wed Jan 2 15:19:48 2008 From: kevredon at gmail.com (tsaitgaist) Date: Wed, 02 Jan 2008 15:19:48 -0000 Subject: [Bug 21344] Re: Hang when loading ipw2100 References: <20060113141220.21012.9495.launchpad@macquarie.warthogs.hbd.com> <20071230184449.24279.55586.malone@gandwana.ubuntu.com> Message-ID: <4a20f6450801020719y90f6ad8v4318b382ec016507@mail.gmail.com> here the files. I saied the light for the wifi was on, but I forgot to say it's also on without any wifi card. the lspci is WITHOUT the card (I can't start with it : forever loading driver loop) (it used a tarball because I couldn't attach multiple files on the launchpad) On Dec 30, 2007 7:44 PM, Leann Ogasawara wrote: > Thanks for testing. Per the kernel team's bug policy, can you please > attach the following information for the newer Hardy Alpha2 kernel. > Also, can you please attach each file separately rather than as a > tarball, it would be much appreciated. > > * uname -a > uname-a.log > * cat /proc/version_signature > version.log > * dmesg > dmesg.log > * sudo lspci -vvnn > lspci-vvnn.log > > For more information regarding the kernel team bug policy, please refer > to https://wiki.ubuntu.com/KernelTeamBugPolicies . Thanks again and we > appreciate your help and feedback. > > > -- > Hang when loading ipw2100 > https://bugs.launchpad.net/bugs/21344 > You received this bug notification because you are a direct subscriber > of the bug. > -- Hang when loading ipw2100 https://bugs.launchpad.net/bugs/21344 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From rtzra at mail.ru Wed Jan 2 15:55:18 2008 From: rtzra at mail.ru (rtzra) Date: Wed, 02 Jan 2008 15:55:18 -0000 Subject: [Bug 60439] Re: iptables connlimit/iplimit not working References: <20060914174022.28762.12750.malonedeb@gandwana.ubuntu.com> Message-ID: <20080102155518.21858.64952.malone@gangotri.ubuntu.com> There are many modules, not included in /lib/iptables See https://bugs.launchpad.net/ubuntu/+source/iptables/+bug/141436 -- iptables connlimit/iplimit not working https://bugs.launchpad.net/bugs/60439 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From sebastian.ro at gmx.de Wed Jan 2 18:30:26 2008 From: sebastian.ro at gmx.de (Sebastian Rode) Date: Wed, 02 Jan 2008 18:30:26 -0000 Subject: [Bug 61285] Re: No image during bootup with DVI panel References: <20060919183947.17606.39530.malonedeb@gandwana.ubuntu.com> Message-ID: <20080102183027.7311.96930.launchpad@potassium.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Importance: Undecided => Medium Status: Incomplete => Confirmed -- No image during bootup with DVI panel https://bugs.launchpad.net/bugs/61285 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From unggnu at googlemail.com Wed Jan 2 19:37:03 2008 From: unggnu at googlemail.com (unggnu) Date: Wed, 02 Jan 2008 19:37:03 -0000 Subject: [Bug 30395] Re: X-Server Crashes when switch back from terminal tty References: <20060203130714.29848.23643.malonedeb@gangotri.ubuntu.com> Message-ID: <20080102193704.21858.67383.malone@gangotri.ubuntu.com> I am closing this bug report since this issue should be fixed in Ubuntu Gutsy Gibbon 7.10 and there is no response for more than two months. ** Changed in: xserver-xorg-video-i810 (Ubuntu) Status: Incomplete => Invalid -- X-Server Crashes when switch back from terminal tty https://bugs.launchpad.net/bugs/30395 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From brian at ubuntu.com Wed Jan 2 20:41:37 2008 From: brian at ubuntu.com (Brian Murray) Date: Wed, 02 Jan 2008 20:41:37 -0000 Subject: [Bug 177301] Re: 6.06.2 installation in vmware resulted in kernel-oops in ext3_add_entry References: <20071218232723.2311.62576.malonedeb@gangotri.ubuntu.com> Message-ID: <20080102204137.21953.77916.malone@gangotri.ubuntu.com> As of yet I've been unable to reproduce these crashes on my laptop but have seen the following when booting the iso: mptspi: disagrees about version of symbol mptscsih_io_done mptspi: Unknown symbol mptscsih_io_done for multiple different symbols. -- 6.06.2 installation in vmware resulted in kernel-oops in ext3_add_entry https://bugs.launchpad.net/bugs/177301 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From sebastian.ro at gmx.de Wed Jan 2 21:46:24 2008 From: sebastian.ro at gmx.de (Sebastian Rode) Date: Wed, 02 Jan 2008 21:46:24 -0000 Subject: [Bug 63028] Re: Ubuntu-server Installation freezes on AMD Dual Proc server References: <20060929184601.2244.44306.malonedeb@gangotri.ubuntu.com> Message-ID: <20080102214624.16156.9759.malone@gangotri.ubuntu.com> Thank you for taking the time to report this bug and helping to make Ubuntu better. You reported this bug a while ago and there hasn't been any activity in it recently. We were wondering is this still an issue for you? Can you try with latest Ubuntu release? Thanks in advance. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: New => Incomplete -- Ubuntu-server Installation freezes on AMD Dual Proc server https://bugs.launchpad.net/bugs/63028 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From schmirrwurst at free.fr Thu Jan 3 08:51:39 2008 From: schmirrwurst at free.fr (schmirrwurst at free.fr) Date: Thu, 03 Jan 2008 08:51:39 -0000 Subject: [Bug 68659] Re: Certain VIA-based chipsets erroneously enable DXS support References: <20061027164839.17734.47718.malonedeb@gandwana.ubuntu.com> Message-ID: <20080103085139.23709.56230.launchpad@gangotri.ubuntu.com> ** Also affects: linux-restricted-modules-2.6.22 (Ubuntu) Importance: Undecided Status: New ** Also affects: linux-source-2.6.22 (Ubuntu) Importance: Undecided Status: New -- Certain VIA-based chipsets erroneously enable DXS support https://bugs.launchpad.net/bugs/68659 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From kevredon at gmail.com Thu Jan 3 08:56:42 2008 From: kevredon at gmail.com (tsaitgaist) Date: Thu, 03 Jan 2008 08:56:42 -0000 Subject: [Bug 21344] Re: Hang when loading ipw2100 References: <20060113141220.21012.9495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080103085642.1978.24388.malone@potassium.ubuntu.com> ** Attachment added: "dmesg.log" http://launchpadlibrarian.net/11130171/dmesg.log -- Hang when loading ipw2100 https://bugs.launchpad.net/bugs/21344 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From kevredon at gmail.com Thu Jan 3 09:05:27 2008 From: kevredon at gmail.com (tsaitgaist) Date: Thu, 03 Jan 2008 09:05:27 -0000 Subject: [Bug 21344] Re: Hang when loading ipw2100 References: <20060113141220.21012.9495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080103090527.23709.27639.malone@gangotri.ubuntu.com> ** Attachment added: "version.log" http://launchpadlibrarian.net/11130328/version.log -- Hang when loading ipw2100 https://bugs.launchpad.net/bugs/21344 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From kevredon at gmail.com Thu Jan 3 09:05:04 2008 From: kevredon at gmail.com (tsaitgaist) Date: Thu, 03 Jan 2008 09:05:04 -0000 Subject: [Bug 21344] Re: Hang when loading ipw2100 References: <20060113141220.21012.9495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080103090504.8884.27772.malone@gandwana.ubuntu.com> ** Attachment added: "uname-a.log" http://launchpadlibrarian.net/11130323/uname-a.log -- Hang when loading ipw2100 https://bugs.launchpad.net/bugs/21344 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From kevredon at gmail.com Thu Jan 3 09:04:29 2008 From: kevredon at gmail.com (tsaitgaist) Date: Thu, 03 Jan 2008 09:04:29 -0000 Subject: [Bug 21344] Re: Hang when loading ipw2100 References: <20060113141220.21012.9495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080103090429.8884.35850.malone@gandwana.ubuntu.com> on 7.10 i386 (with the card) ** Attachment added: "lspci-vvnn.log" http://launchpadlibrarian.net/11130302/lspci-vvnn.log -- Hang when loading ipw2100 https://bugs.launchpad.net/bugs/21344 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From kevredon at gmail.com Thu Jan 3 09:02:56 2008 From: kevredon at gmail.com (tsaitgaist) Date: Thu, 03 Jan 2008 09:02:56 -0000 Subject: [Bug 21344] Re: Hang when loading ipw2100 References: <20060113141220.21012.9495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080103090256.8787.46269.malone@gandwana.ubuntu.com> on 8.04 Alpha2 AMD64 ** Attachment added: "lspci-vvnn.log" http://launchpadlibrarian.net/11130254/lspci-vvnn.log -- Hang when loading ipw2100 https://bugs.launchpad.net/bugs/21344 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From sebastian.ro at gmx.de Thu Jan 3 09:48:53 2008 From: sebastian.ro at gmx.de (Sebastian Rode) Date: Thu, 03 Jan 2008 09:48:53 -0000 Subject: [Bug 48305] Re: Clean Dapper installation hangs on 'preconfiguring networking...' / problem w. 8139too References: <20060604023245.5009.56960.malonedeb@gandwana.ubuntu.com> Message-ID: <20080103094853.28435.59713.malone@gangotri.ubuntu.com> Thank you for taking the time to report this bug and helping to make Ubuntu better. You reported this bug a while ago and there hasn't been any activity in it recently. We were wondering is this still an issue for you? Can you try with latest Ubuntu release? Thanks in advance. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: New => Incomplete -- Clean Dapper installation hangs on 'preconfiguring networking...' / problem w. 8139too https://bugs.launchpad.net/bugs/48305 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From sebastian.ro at gmx.de Thu Jan 3 09:52:17 2008 From: sebastian.ro at gmx.de (Sebastian Rode) Date: Thu, 03 Jan 2008 09:52:17 -0000 Subject: [Bug 48456] Re: kubuntu 6.06 LTS does not support Realtek 8139 network card References: <20060605021834.4978.67001.malonedeb@gandwana.ubuntu.com> Message-ID: <20080103095217.21742.13533.malone@gandwana.ubuntu.com> Thank you for taking the time to report this bug and helping to make Ubuntu better. The issue that you reported is one that should be reproducible with the live environment of the Desktop CD of the development release - Hardy Heron. It would help us greatly if you could test with it so we can work on getting it fixed in the next release of Ubuntu. You can find out more about the development release at http://www.ubuntu.com/testing/ . Thanks again and we appreciate your help. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Incomplete -- kubuntu 6.06 LTS does not support Realtek 8139 network card https://bugs.launchpad.net/bugs/48456 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From otte at gnome.org Thu Jan 3 10:39:17 2008 From: otte at gnome.org (Benjamin Otte (Company)) Date: Thu, 03 Jan 2008 10:39:17 -0000 Subject: [Bug 180046] Apple USB Keyboard doesn't work References: <20080103103917.8884.65523.malonedeb@gandwana.ubuntu.com> Message-ID: <20080103103917.8884.65523.malonedeb@gandwana.ubuntu.com> Public bug reported: I recently got an Apple USB keyboard and want to use it on my old desktop. However, sometimes, in particular after rebooting from Windows (dual boot), the keyboard does not work. Dmesg spams this message on and on: [ 65.934201] printk: 2 messages suppressed. [ 65.934210] hub 5-0:1.0: connect-debounce failed, port 1 disabled [ 69.774523] printk: 1 messages suppressed. [ 69.774532] hub 5-0:1.0: connect-debounce failed, port 1 disabled After disconnecting the keyboard cable and reconnecting it, it works fine. The machine in question contains an ASUS A7V333 mainboard. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- Apple USB Keyboard doesn't work https://bugs.launchpad.net/bugs/180046 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From otte at gnome.org Thu Jan 3 10:50:50 2008 From: otte at gnome.org (Benjamin Otte (Company)) Date: Thu, 03 Jan 2008 10:50:50 -0000 Subject: [Bug 180046] Re: Apple USB Keyboard doesn't work References: <20080103103917.8884.65523.malonedeb@gandwana.ubuntu.com> Message-ID: <20080103105050.1924.73607.malone@potassium.ubuntu.com> ** Attachment added: "lspci -vv output" http://launchpadlibrarian.net/11131648/lspci -- Apple USB Keyboard doesn't work https://bugs.launchpad.net/bugs/180046 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From taylorjh1 at yahoo.com Thu Jan 3 13:49:37 2008 From: taylorjh1 at yahoo.com (taylorjh) Date: Thu, 03 Jan 2008 13:49:37 -0000 Subject: [Bug 33617] Re: X.org does not initialize screen on IBM T20, T21, T22 References: <20060303202744.17498.68273.malonedeb@gangotri.ubuntu.com> Message-ID: <20080103134937.1978.59364.malone@potassium.ubuntu.com> I am able to reproduce this problem routinely on a T20 laptop. If I boot "cold", the boot completes and the system runs normally. If I try booting while the machine is still "warm" from previous use (e.g. running Ubuntu), it hangs as described with the dark screen and just the "-" in the upper right portion of the screen. If I unplug the adapter and let it "cool" for a while, I can boot it successfully without any perceived problems. I am funning version 7.10 and, although quite knowledgeable generally with computers, I have no prior experience with Linux. -- X.org does not initialize screen on IBM T20, T21, T22 https://bugs.launchpad.net/bugs/33617 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From toufik2 at hotmail.com Thu Jan 3 14:15:14 2008 From: toufik2 at hotmail.com (Toufik) Date: Thu, 03 Jan 2008 14:15:14 -0000 Subject: [Bug 29987] Re: [sonypi] Not work Fn keys on Sony VAIO VGN-FS* References: <20060129140914.9344.99738.malonedeb@gandwana.ubuntu.com> Message-ID: <20080103141515.8884.16892.malone@gandwana.ubuntu.com> Confirmed with Hardy Alpha 2 LiveCD on a Vaio VGN-FS315B, useful files are attached ** Attachment added: "uname-a.log" http://launchpadlibrarian.net/11134554/uname-a.log -- [sonypi] Not work Fn keys on Sony VAIO VGN-FS* https://bugs.launchpad.net/bugs/29987 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From toufik2 at hotmail.com Thu Jan 3 14:15:39 2008 From: toufik2 at hotmail.com (Toufik) Date: Thu, 03 Jan 2008 14:15:39 -0000 Subject: [Bug 29987] Re: [sonypi] Not work Fn keys on Sony VAIO VGN-FS* References: <20060129140914.9344.99738.malonedeb@gandwana.ubuntu.com> Message-ID: <20080103141539.8787.27146.malone@gandwana.ubuntu.com> ** Attachment added: "version.log" http://launchpadlibrarian.net/11134555/version.log -- [sonypi] Not work Fn keys on Sony VAIO VGN-FS* https://bugs.launchpad.net/bugs/29987 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From toufik2 at hotmail.com Thu Jan 3 14:15:57 2008 From: toufik2 at hotmail.com (Toufik) Date: Thu, 03 Jan 2008 14:15:57 -0000 Subject: [Bug 29987] Re: [sonypi] Not work Fn keys on Sony VAIO VGN-FS* References: <20060129140914.9344.99738.malonedeb@gandwana.ubuntu.com> Message-ID: <20080103141557.23709.43751.malone@gangotri.ubuntu.com> ** Attachment added: "dmesg.log" http://launchpadlibrarian.net/11134556/dmesg.log -- [sonypi] Not work Fn keys on Sony VAIO VGN-FS* https://bugs.launchpad.net/bugs/29987 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From toufik2 at hotmail.com Thu Jan 3 14:16:15 2008 From: toufik2 at hotmail.com (Toufik) Date: Thu, 03 Jan 2008 14:16:15 -0000 Subject: [Bug 29987] Re: [sonypi] Not work Fn keys on Sony VAIO VGN-FS* References: <20060129140914.9344.99738.malonedeb@gandwana.ubuntu.com> Message-ID: <20080103141615.8787.6153.malone@gandwana.ubuntu.com> ** Attachment added: "lscpi-vvnn.log" http://launchpadlibrarian.net/11134558/lscpi-vvnn.log -- [sonypi] Not work Fn keys on Sony VAIO VGN-FS* https://bugs.launchpad.net/bugs/29987 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From bugpost.tormod at gmail.com Thu Jan 3 14:35:17 2008 From: bugpost.tormod at gmail.com (Tormod Volden) Date: Thu, 03 Jan 2008 14:35:17 -0000 Subject: [Bug 33617] Re: X.org does not initialize screen on IBM T20, T21, T22 References: <20060303202744.17498.68273.malonedeb@gangotri.ubuntu.com> Message-ID: <20080103143518.28435.99868.launchpad@gangotri.ubuntu.com> ** Description changed: On the IBM T20 laptop using the Savage drivers, when gdm starts X, the screen stays black with a "_". The sound is initialized (I can hear the startup sound) and I can login through SSH. The screen gets initalized every 3 to 4 times of startup but I can't decern a pattern. This has always worked in previous versions of Ubuntu. + + Workaround: Add this to the Device section of xorg.conf: + Option "BusType" "PCI" ** Summary changed: - X.org does not initialize screen on IBM T20, T21, T22 + [agp] X.org does not initialize screen on IBM T20, T21, T22 -- [agp] X.org does not initialize screen on IBM T20, T21, T22 https://bugs.launchpad.net/bugs/33617 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From leann at ubuntu.com Thu Jan 3 17:00:44 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Thu, 03 Jan 2008 17:00:44 -0000 Subject: [Bug 21344] Re: Hang when loading ipw2100 References: <20060113141220.21012.9495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080103170044.23606.29625.malone@gangotri.ubuntu.com> Hi tsaitgaist, Care to try one more test? Take a look at the following link: http://ipw2100.sourceforge.net/#issues . The error messages you are witnessing with the newer Hardy kernel are almost exactly the same as what's documented there. Can you try the workaround mentioned there and verify if it helps? Thanks. -- Hang when loading ipw2100 https://bugs.launchpad.net/bugs/21344 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From info at ccamstelveen.nl Thu Jan 3 18:43:18 2008 From: info at ccamstelveen.nl (EljoPc) Date: Thu, 03 Jan 2008 18:43:18 -0000 Subject: [Bug 105977] Re: wpa won't connect -- wep connects -- ndiswrapper References: <20070412203939.19383.19971.malonedeb@gandwana.ubuntu.com> Message-ID: <20080103184318.8884.86268.malone@gandwana.ubuntu.com> This bug still consists in Hardy Alpha 2 with my Ralink RT73 USB stick. -- wpa won't connect -- wep connects -- ndiswrapper https://bugs.launchpad.net/bugs/105977 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From bugpost.tormod at gmail.com Thu Jan 3 19:16:25 2008 From: bugpost.tormod at gmail.com (Tormod Volden) Date: Thu, 03 Jan 2008 19:16:25 -0000 Subject: [Bug 87244] Re: MASTER: no r5xx support in radeon driver (X1300, X1400, X1600, X1800, X1900, X1950) References: <20070223041053.27492.69819.malonedeb@gangotri.ubuntu.com> Message-ID: <20080103191626.28435.75086.malone@gangotri.ubuntu.com> The newest git version of the -ati driver has support for these cards. You can find test builds on https://wiki.ubuntu.com/XorgOnTheEdge . For quicker turnaround, file related bugs directly on bugs.freedesktop.org or talk with the developers on IRC #radeon. -- MASTER: no r5xx support in radeon driver (X1300, X1400, X1600, X1800, X1900, X1950) https://bugs.launchpad.net/bugs/87244 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From marcologne at gmx.net Thu Jan 3 21:29:58 2008 From: marcologne at gmx.net (marcologne) Date: Thu, 03 Jan 2008 21:29:58 -0000 Subject: [Bug 53754] Re: ata_piix problem with Intel ICH7 chipset References: <20060722182526.11213.79901.malonedeb@gandwana.ubuntu.com> Message-ID: <20080103212958.17348.96729.malone@potassium.ubuntu.com> *** This bug is a duplicate of bug 84603 *** https://bugs.launchpad.net/bugs/84603 yes, it worked with me on 2.6.22-14-generic, too I updated firmware SS03 march 2007 using Samsung tool under xp. The firmware upgrade fixed lockups and the 'ata1: port is slow to respond'-problem'. Hardware: Medion MD 98000 CoreDuo T2300 notebook with Intel 82801GBM/GHM SATA AHCI controller, drive to flash: Samsung SN-S082D SLIM DVD-RW Still open is that know issue SATA drive on. SATA initializes quite often, every 5 min for some seconds without lockup. I can't find any dmesg event coresponding to that behaviour. See also https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/84603 If someone has a solution for that, please let me know. http://samsungoms.com/KorLib/File/sfdnwin.exe http://www.opendrivers.com/driver/237193/samsung-sn-s082d-slim-firmware-ss03-windows-98se-me-2000-xp-free-download.html -- ata_piix problem with Intel ICH7 chipset https://bugs.launchpad.net/bugs/53754 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From serge at vanginderachter.be Thu Jan 3 21:48:04 2008 From: serge at vanginderachter.be (Serge van Ginderachter) Date: Thu, 03 Jan 2008 21:48:04 -0000 Subject: [Bug 71567] Re: LVM Snapshot removal causes intermittent kernel panic References: <20061112230042.25975.26600.malonedeb@gandwana.ubuntu.com> Message-ID: <20080103214804.9713.60673.malone@gangotri.ubuntu.com> As this issue probaly will never be resolved, I tried out another idea: installing the latest edgy kernel on dapper. ~# wget http://be.archive.ubuntu.com/ubuntu/pool/main/l/linux-source-2.6.17/linux-image-2.6.17-12-server_2.6.17.1-12.42_i386.deb ~# dpkg -i linux-image-2.6.17-12-server_2.6.17.1-12.42_i386.deb This installs and boots without any problems. Hopefully this LVM bug is resolved in this kernel. -- LVM Snapshot removal causes intermittent kernel panic https://bugs.launchpad.net/bugs/71567 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From taylorjh1 at yahoo.com Thu Jan 3 23:03:27 2008 From: taylorjh1 at yahoo.com (taylorjh) Date: Thu, 03 Jan 2008 23:03:27 -0000 Subject: [Bug 33617] Re: X.org does not initialize screen on IBM T20, T21, T22 References: <20060303202744.17498.68273.malonedeb@gangotri.ubuntu.com> Message-ID: <542477.28931.qm@web38813.mail.mud.yahoo.com> Tormod, Thank you very much for your prompt and helpful response on the problem that I was experiencing! This demonstrates the vibrancy and value of Open Source in general and Ubuntu in particular. With some "fear", this "dumb user" made the change that you suggested after learning to use sudo and nano, and it worked! Thank you very much! John John H. Taylor, LLC 5 Falcon Court Limestone Hills Wilmington, DE 19808-4317 Phone: (302) 234-2566 Pager: 888-432-8057 or 8423057 at skytel.com ----- Original Message ---- From: Tormod Volden To: taylorjh1 at yahoo.com Sent: Thursday, January 3, 2008 9:35:17 AM Subject: [Bug 33617] Re: X.org does not initialize screen on IBM T20, T21, T22 ** Description changed: On the IBM T20 laptop using the Savage drivers, when gdm starts X, the screen stays black with a "_". The sound is initialized (I can hear the startup sound) and I can login through SSH. The screen gets initalized every 3 to 4 times of startup but I can't decern a pattern. This has always worked in previous versions of Ubuntu. + + Workaround: Add this to the Device section of xorg.conf: + Option "BusType" "PCI" ** Summary changed: - X.org does not initialize screen on IBM T20, T21, T22 + [agp] X.org does not initialize screen on IBM T20, T21, T22 -- [agp] X.org does not initialize screen on IBM T20, T21, T22 https://bugs.launchpad.net/bugs/33617 You received this bug notification because you are a direct subscriber of the bug. -- [agp] X.org does not initialize screen on IBM T20, T21, T22 https://bugs.launchpad.net/bugs/33617 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From g.borello at gmail.com Thu Jan 3 23:29:48 2008 From: g.borello at gmail.com (Gianluca Borello) Date: Thu, 03 Jan 2008 23:29:48 -0000 Subject: [Bug 162363] Re: [ ndiswrapper 1.9 ] kernel panic gutsy on strong use of wireless network References: <20071113081053.21044.1469.malonedeb@gandwana.ubuntu.com> Message-ID: <20080103232949.17402.75311.malone@potassium.ubuntu.com> It also happens to me, using amule and other programs (gutsy). In kernel log, i found this entry: Jan 3 19:50:39 sedonc kernel: [ 787.472000] ndiswrapper (NdisFreeBuffer:1180): invalid buffer >From the output of lspci: 06:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Other details about my version of ndiswrapper and the driver i'm using: [ 21.596000] ndiswrapper version 1.45 loaded (smp=yes) [ 21.684000] ndiswrapper: driver bcmwl5a (Broadcom,12/22/2004, 3.100.46.0) loaded Thank you for your works. -- [ ndiswrapper 1.9 ] kernel panic gutsy on strong use of wireless network https://bugs.launchpad.net/bugs/162363 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From leann at ubuntu.com Fri Jan 4 01:54:21 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Fri, 04 Jan 2008 01:54:21 -0000 Subject: [Bug 83290] Re: [gutsy] kernel 2.6.20 and 2.6.22 problem on asus centrino References: <20070204195735.4882.1300.malonedeb@gangotri.ubuntu.com> Message-ID: <20080104015421.9661.6541.malone@gangotri.ubuntu.com> Hardy Heron Alpha2 was recently released. It contains an updated version of the kernel. You can download and try the new Hardy Heron Alpha2 release from http://cdimage.ubuntu.com/releases/hardy/alpha-2/ . You should be able to then test the new kernel via the LiveCD. If you can, please verify if this bug still exists or not and report back your results. General information regarding the release can also be found here: http://www.ubuntu.com/testing/hardy/alpha2 . Thanks! ** Also affects: linux (Ubuntu) Importance: Undecided Status: New ** Changed in: linux (Ubuntu) Status: New => Incomplete ** Tags removed: hardy-kernel-candidate -- [gutsy] kernel 2.6.20 and 2.6.22 problem on asus centrino https://bugs.launchpad.net/bugs/83290 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From leann at ubuntu.com Fri Jan 4 02:29:03 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Fri, 04 Jan 2008 02:29:03 -0000 Subject: [Bug 45295] Re: PCMCIA does not bring up eth1 during boot References: <20060517191118.15142.67878.malonedeb@gandwana.ubuntu.com> Message-ID: <20080104022903.9713.40751.malone@gangotri.ubuntu.com> Hardy Heron Alpha2 was recently released. It contains an updated version of the kernel. You can download and try the new Hardy Heron Alpha2 release from http://cdimage.ubuntu.com/releases/hardy/alpha-2/ . You should be able to then test the new kernel via the LiveCD. If you can, please verify if this bug still exists or not and report back your results. General information regarding the release can also be found here: http://www.ubuntu.com/testing/hardy/alpha2 . Thanks! ** Also affects: linux (Ubuntu) Importance: Undecided Status: New ** Changed in: linux (Ubuntu) Status: New => Incomplete ** Tags removed: hardy-kernel-candidate -- PCMCIA does not bring up eth1 during boot https://bugs.launchpad.net/bugs/45295 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From dyerger at stcservices.com Fri Jan 4 03:57:25 2008 From: dyerger at stcservices.com (DavidYerger) Date: Fri, 04 Jan 2008 03:57:25 -0000 Subject: [Bug 34155] Re: Suspend-To-Ram (S3) doesn't work on Dell Latitude C640 References: <20060308232941.29403.57547.malonedeb@gangotri.ubuntu.com> Message-ID: <20080104035725.17348.28688.malone@potassium.ubuntu.com> Whoopsie--sorry Erik, I only tested hibernate. Suspend worked for me twice (with the exception of an external drive), then locked me up with a striped screen on the third try after waiting longer. I think I read somewhere that the problem might be with the video chip. Maybe I should try the "ati" driver instead of "radeon". DOUBLE_CONSOLE_SWITCH might help if that's the problem, too. Also, read here http://ubuntuforums.org/showthread.php?t=211592 on how to get suspend to work, seems to work fine for me, but it's "cheating" with regard to the present topic as it drops into S1 not S3 sleep. HTH -- Suspend-To-Ram (S3) doesn't work on Dell Latitude C640 https://bugs.launchpad.net/bugs/34155 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From geoff at galexy.net Fri Jan 4 07:57:18 2008 From: geoff at galexy.net (Geoff Shuetrim) Date: Fri, 04 Jan 2008 07:57:18 -0000 Subject: [Bug 180281] Intel HDA soundcard produces no sound with Ubuntu 7.10 Generic References: <20080104075718.6444.43169.malonedeb@gandwana.ubuntu.com> Message-ID: <20080104075718.6444.43169.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-generic Installed 32 bit Ubuntu 7.10 from the ISO image on a desktop PC with on- board sound. Linux dell 2.6.22-14-generic #1 SMP Tue Dec 18 08:02:57 UTC 2007 i686 GNU/Linux 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) Subsystem: Dell Unknown device [1028:01dc] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Message-ID: <20080104075817.17402.96510.malone@potassium.ubuntu.com> uname -a ** Attachment added: "uname -a" http://launchpadlibrarian.net/11146289/uname-a.log -- Intel HDA soundcard produces no sound with Ubuntu 7.10 Generic https://bugs.launchpad.net/bugs/180281 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From geoff at galexy.net Fri Jan 4 07:59:06 2008 From: geoff at galexy.net (Geoff Shuetrim) Date: Fri, 04 Jan 2008 07:59:06 -0000 Subject: [Bug 180281] Re: Intel HDA soundcard produces no sound with Ubuntu 7.10 Generic References: <20080104075718.6444.43169.malonedeb@gandwana.ubuntu.com> Message-ID: <20080104075906.9713.94621.malone@gangotri.ubuntu.com> sudo lspci -vvnn ** Attachment added: "sudo lspci -vvnn" http://launchpadlibrarian.net/11146311/lspci-vvnn.log -- Intel HDA soundcard produces no sound with Ubuntu 7.10 Generic https://bugs.launchpad.net/bugs/180281 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From geoff at galexy.net Fri Jan 4 07:59:59 2008 From: geoff at galexy.net (Geoff Shuetrim) Date: Fri, 04 Jan 2008 07:59:59 -0000 Subject: [Bug 180281] Re: Intel HDA soundcard produces no sound with Ubuntu 7.10 Generic References: <20080104075718.6444.43169.malonedeb@gandwana.ubuntu.com> Message-ID: <20080104075959.17402.93805.malone@potassium.ubuntu.com> ./alsa-info.sh --no-upload ** Attachment added: "./alsa-info.sh --no-upload" http://launchpadlibrarian.net/11146320/alsa-info.txt -- Intel HDA soundcard produces no sound with Ubuntu 7.10 Generic https://bugs.launchpad.net/bugs/180281 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From kevredon at gmail.com Fri Jan 4 08:01:23 2008 From: kevredon at gmail.com (tsaitgaist) Date: Fri, 04 Jan 2008 08:01:23 -0000 Subject: [Bug 21344] Re: Hang when loading ipw2100 References: <20060113141220.21012.9495.launchpad@macquarie.warthogs.hbd.com> <20080103170044.23606.29625.malone@gangotri.ubuntu.com> Message-ID: <4a20f6450801040001r543bda58h6a4195e9b3e57013@mail.gmail.com> augmenting the timeout doesn't change anything. But I'm still ready to do some more tests On Jan 3, 2008 6:00 PM, Leann Ogasawara wrote: > Hi tsaitgaist, > > Care to try one more test? Take a look at the following link: > http://ipw2100.sourceforge.net/#issues . The error messages you are > witnessing with the newer Hardy kernel are almost exactly the same as > what's documented there. Can you try the workaround mentioned there and > verify if it helps? Thanks. > > > -- > Hang when loading ipw2100 > https://bugs.launchpad.net/bugs/21344 > You received this bug notification because you are a direct subscriber > of the bug. > -- Hang when loading ipw2100 https://bugs.launchpad.net/bugs/21344 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From geoff at galexy.net Fri Jan 4 08:10:42 2008 From: geoff at galexy.net (Geoff Shuetrim) Date: Fri, 04 Jan 2008 08:10:42 -0000 Subject: [Bug 180281] Re: Intel HDA soundcard produces no sound with Ubuntu 7.10 Generic References: <20080104075718.6444.43169.malonedeb@gandwana.ubuntu.com> Message-ID: <20080104081042.6444.32052.malone@gandwana.ubuntu.com> I have tried installing linux-386 instead with no success. I have tried building alsa using the module-assistant with no success. Sound worked fine under Feisty for amd64. Sound also worked fine when I upgraded Feisty for amd64 to Gutsy. The problem only arose when I did a fresh install using the 32 bit operating system. -- Intel HDA soundcard produces no sound with Ubuntu 7.10 Generic https://bugs.launchpad.net/bugs/180281 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From bugtracker at slideomania.com Fri Jan 4 09:00:23 2008 From: bugtracker at slideomania.com (hk47) Date: Fri, 04 Jan 2008 09:00:23 -0000 Subject: [Bug 180289] [linux-source] [CVE-2007-5966] integer overflow in the hrtimer_start function in kernel/hrtimer.c, local vulnerabilty References: <20080104090023.6444.10385.malonedeb@gandwana.ubuntu.com> Message-ID: <20080104090023.6444.10385.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-source References: CVE-2007-5966 (http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2007-5966) Quoting: "Integer overflow in the hrtimer_start function in kernel/hrtimer.c in the Linux kernel before 2.6.23.10 allows local users to execute arbitrary code or cause a denial of service (panic) via a large relative timeout value. NOTE: some of these details are obtained from third party information." ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New ** Visibility changed to: Public ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2007-5966 -- [linux-source] [CVE-2007-5966] integer overflow in the hrtimer_start function in kernel/hrtimer.c, local vulnerabilty https://bugs.launchpad.net/bugs/180289 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From bugtracker at slideomania.com Fri Jan 4 09:07:31 2008 From: bugtracker at slideomania.com (hk47) Date: Fri, 04 Jan 2008 09:07:31 -0000 Subject: [Bug 180292] [linux-source] [CVE-2007-6063] Buffer overflow in the isdn_net_setcfg function in isdn_net.c, possible local vulnerability References: <20080104090732.9713.74776.malonedeb@gangotri.ubuntu.com> Message-ID: <20080104090732.9713.74776.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-source Quoting CVE-2007-6063: "Buffer overflow in the isdn_net_setcfg function in isdn_net.c in Linux kernel 2.6.23 allows local users to have an unknown impact via a crafted argument to the isdn_ioctl function." Although only reported for 2.6.23, this bug got fixed for Debian Etch's kernel, see DSA-1436-1 (http://www.debian.org/security/2007/dsa-1436). ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New ** Visibility changed to: Public ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2007-6063 -- [linux-source] [CVE-2007-6063] Buffer overflow in the isdn_net_setcfg function in isdn_net.c, possible local vulnerability https://bugs.launchpad.net/bugs/180292 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From bugtracker at slideomania.com Fri Jan 4 09:12:59 2008 From: bugtracker at slideomania.com (hk47) Date: Fri, 04 Jan 2008 09:12:59 -0000 Subject: [Bug 180294] [linux-source] [CVE-2007-6206] local coredump information disclosure vulnerability References: <20080104091259.17402.49095.malonedeb@potassium.ubuntu.com> Message-ID: <20080104091259.17402.49095.malonedeb@potassium.ubuntu.com> Public bug reported: Binary package hint: linux-source Quoting CVE-2007-6206: "The do_coredump function in fs/exec.c in Linux kernel 2.4.x and 2.6.x up to 2.6.24-rc3, and possibly other versions, does not change the UID of a core dump file if it exists before a root process creates a core dump in the same location, which might allow local users to obtain sensitive information." ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New ** Visibility changed to: Public ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2007-6206 -- [linux-source] [CVE-2007-6206] local coredump information disclosure vulnerability https://bugs.launchpad.net/bugs/180294 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From bugtracker at slideomania.com Fri Jan 4 09:15:59 2008 From: bugtracker at slideomania.com (hk47) Date: Fri, 04 Jan 2008 09:15:59 -0000 Subject: [Bug 180295] [linux-source] [CVE-2007-6417] information disclosure and DoS vulnerability References: <20080104091559.9661.47146.malonedeb@gangotri.ubuntu.com> Message-ID: <20080104091559.9661.47146.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-source Quoting CVE-2007-6417: "The shmem_getpage function (mm/shmem.c) in Linux kernel 2.6.11 through 2.6.23 does not properly clear allocated memory in some rare circumstances, which might allow local users to read sensitive kernel data or cause a denial of service (crash)." ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New ** Visibility changed to: Public ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2007-6417 -- [linux-source] [CVE-2007-6417] information disclosure and DoS vulnerability https://bugs.launchpad.net/bugs/180295 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From rondom at rondom.de Fri Jan 4 16:18:05 2008 From: rondom at rondom.de (Andreas Gnau) Date: Fri, 04 Jan 2008 16:18:05 -0000 Subject: [Bug 105977] Re: wpa won't connect -- wep connects -- ndiswrapper References: <20070412203939.19383.19971.malonedeb@gandwana.ubuntu.com> Message-ID: <20080104161805.9713.29740.malone@gangotri.ubuntu.com> After trying to connect please provide the output of - dmesg - lsmod|grep ndiswrapper - ndiswrapper -v Also make sure, that the rt73usb module is not loaded (check with lsmod|grep rt73usb) Also try installing the latest ndiswrapper-version from source (http://ndiswrapper.sf.net) and providing the same output as requested above again (reboot or reload ndiswrapper in between). -- wpa won't connect -- wep connects -- ndiswrapper https://bugs.launchpad.net/bugs/105977 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From leann at ubuntu.com Fri Jan 4 17:12:16 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Fri, 04 Jan 2008 17:12:16 -0000 Subject: [Bug 70774] Re: Boot fails with APIC enabled on an Asus A7V8X-X Motherboard References: <20061107195306.877.58029.malonedeb@gangotri.ubuntu.com> Message-ID: <20080104171217.9661.94377.malone@gangotri.ubuntu.com> This bug report is being closed because we received no reponse to the last inquiry for information. Please reopen it if this is still an issue in the current Ubuntu release. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Please don't hesitate to submit bug reports in the future, we really appreciate it. Thanks again! ** Changed in: linux-source-2.6.22 (Ubuntu) Status: Incomplete => Invalid ** Changed in: linux-source-2.6.20 (Ubuntu) Status: Confirmed => Won't Fix -- Boot fails with APIC enabled on an Asus A7V8X-X Motherboard https://bugs.launchpad.net/bugs/70774 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From leann at ubuntu.com Fri Jan 4 17:10:32 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Fri, 04 Jan 2008 17:10:32 -0000 Subject: [Bug 40763] Re: CCMP decrypt failed errors with ipw2200 References: <20060422134633.30538.35482.malonedeb@gangotri.ubuntu.com> Message-ID: <20080104171032.9661.45224.malone@gangotri.ubuntu.com> This bug report is being closed because we received no reponse to the last inquiry for information. Please reopen it if this is still an issue in the current Ubuntu release. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Please don't hesitate to submit bug reports in the future, we really appreciate it. Thanks again! ** Changed in: linux-source-2.6.22 (Ubuntu) Status: Incomplete => Invalid ** Changed in: linux-source-2.6.15 (Ubuntu) Status: New => Won't Fix -- CCMP decrypt failed errors with ipw2200 https://bugs.launchpad.net/bugs/40763 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From launchpad at mierau.eu Fri Jan 4 18:37:48 2008 From: launchpad at mierau.eu (Caspar Clemens Mierau) Date: Fri, 04 Jan 2008 18:37:48 -0000 Subject: [Bug 40763] Re: CCMP decrypt failed errors with ipw2200 References: <20060422134633.30538.35482.malonedeb@gangotri.ubuntu.com> Message-ID: <20080104183748.9661.66898.malone@gangotri.ubuntu.com> I hereby reopen this bug as it is still an issue. A current snippet from dmesg says something like: [ 2903.812000] printk: 8 messages suppressed. [ 2903.812000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 [ 2906.172000] printk: 3 messages suppressed. [ 2906.172000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 [ 2915.380000] printk: 12 messages suppressed. [ 2915.380000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 [ 2930.848000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 [ 2939.348000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 [ 3003.348000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 [ 3012.048000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 [ 3217.164000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 [ 3238.260000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 [ 3240.204000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 [ 3242.252000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 [ 3244.196000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 [ 3246.244000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 [ 3246.248000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 [ 3246.252000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 [ 3255.564000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 [ 3497.236000] CCMP: decrypt failed: STA=00:12:17:cc:06:03 Hardware details: [ccm at hasung:0:~]$ lspci [19:33:04] 00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation NV34M [GeForce FX Go5200 32M/64M] (rev a1) 02:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac) 02:03.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac) 02:03.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04) 02:05.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01) 02:07.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05) Kernel: Linux hasung 2.6.22-14-generic #1 SMP Tue Dec 18 08:02:57 UTC 2007 i686 GNU/Linu ** Changed in: linux-source-2.6.22 (Ubuntu) Status: Invalid => New -- CCMP decrypt failed errors with ipw2200 https://bugs.launchpad.net/bugs/40763 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From emberez at gmail.com Fri Jan 4 18:45:54 2008 From: emberez at gmail.com (Pedro Fragoso) Date: Fri, 04 Jan 2008 18:45:54 -0000 Subject: [Bug 180407] Please merge ndiswrapper 1.51-1 (main) from Debian unstable References: <20080104184555.11144.19832.malonedeb@gandwana.ubuntu.com> Message-ID: <20080104184555.11144.19832.malonedeb@gandwana.ubuntu.com> Public bug reported: ndiswrapper (1.51-1ubuntu1) hardy; urgency=low * Merge from debian unstable, remaining changes: - debian/control; + Build for lpia + Update description to point out that the kernel source package is not required with the standard Ubuntu kernel. + Drop ndiswrapper-source -- Pedro Fragoso Fri, 28 Dec 2007 21:56:53 +0000 Version 1.51 2007-12-17 ======================= * Fixed an smp issue that may cause ndiswrapper to stop transmitting packets after a while (noticed with Marvell Pre-N USB driver) ** Affects: ndiswrapper (Ubuntu) Importance: Undecided Status: New -- Please merge ndiswrapper 1.51-1 (main) from Debian unstable https://bugs.launchpad.net/bugs/180407 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From emberez at gmail.com Fri Jan 4 18:46:58 2008 From: emberez at gmail.com (Pedro Fragoso) Date: Fri, 04 Jan 2008 18:46:58 -0000 Subject: [Bug 180407] Re: Please merge ndiswrapper 1.51-1 (main) from Debian unstable References: <20080104184555.11144.19832.malonedeb@gandwana.ubuntu.com> Message-ID: <20080104184658.11144.88807.malone@gandwana.ubuntu.com> ** Attachment added: "ndiswrapper_1.51-1ubuntu1.interdiff" http://launchpadlibrarian.net/11156673/ndiswrapper_1.51-1ubuntu1.interdiff -- Please merge ndiswrapper 1.51-1 (main) from Debian unstable https://bugs.launchpad.net/bugs/180407 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From sikon at lucidfox.org Fri Jan 4 19:01:51 2008 From: sikon at lucidfox.org (Matvey Kozhev) Date: Fri, 04 Jan 2008 19:01:51 -0000 Subject: [Bug 180407] Re: Please merge ndiswrapper 1.51-1 (main) from Debian unstable References: <20080104184555.11144.19832.malonedeb@gandwana.ubuntu.com> Message-ID: <20080104190152.6444.5363.launchpad@gandwana.ubuntu.com> ** Changed in: ndiswrapper (Ubuntu) Importance: Undecided => Wishlist Status: New => Confirmed -- Please merge ndiswrapper 1.51-1 (main) from Debian unstable https://bugs.launchpad.net/bugs/180407 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From rondom at rondom.de Fri Jan 4 22:02:58 2008 From: rondom at rondom.de (Andreas Gnau) Date: Fri, 04 Jan 2008 22:02:58 -0000 Subject: [Bug 177063] Re: bad tx-power report of ndiswrapper References: <20071218021112.11723.11231.malonedeb@gandwana.ubuntu.com> Message-ID: <20080104220258.17402.31351.malone@potassium.ubuntu.com> _Please_ report this bug to the ndiswrapper-developer. See http://ndiswrapper.sourceforge.net/joomla/index.php?/component/option,com_openwiki/Itemid,33/id,bugs/ on how to do this. Join #ndiswrapper on FreeNode (e.g. using X-Chat included in Ubuntu) if you need additional assistance. -- bad tx-power report of ndiswrapper https://bugs.launchpad.net/bugs/177063 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From rondom at rondom.de Fri Jan 4 22:05:35 2008 From: rondom at rondom.de (Andreas Gnau) Date: Fri, 04 Jan 2008 22:05:35 -0000 Subject: [Bug 180407] Re: Please merge ndiswrapper 1.51-1 (main) from Debian unstable References: <20080104184555.11144.19832.malonedeb@gandwana.ubuntu.com> Message-ID: <20080104220535.6444.21326.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 133110 *** https://bugs.launchpad.net/bugs/133110 ** This bug has been marked a duplicate of bug 133110 Merge with Debian -- Please merge ndiswrapper 1.51-1 (main) from Debian unstable https://bugs.launchpad.net/bugs/180407 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From emberez at gmail.com Fri Jan 4 22:20:24 2008 From: emberez at gmail.com (Pedro Fragoso) Date: Fri, 04 Jan 2008 22:20:24 -0000 Subject: [Bug 180407] Re: Please merge ndiswrapper 1.51-1 (main) from Debian unstable References: <20080104184555.11144.19832.malonedeb@gandwana.ubuntu.com> Message-ID: <20080104222024.28200.33527.malone@potassium.ubuntu.com> *** This bug is a duplicate of bug 133110 *** https://bugs.launchpad.net/bugs/133110 Why this is a duplicate of bug 180407 ? -- Please merge ndiswrapper 1.51-1 (main) from Debian unstable https://bugs.launchpad.net/bugs/180407 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From emberez at gmail.com Fri Jan 4 22:20:59 2008 From: emberez at gmail.com (Pedro Fragoso) Date: Fri, 04 Jan 2008 22:20:59 -0000 Subject: [Bug 180407] Re: Please merge ndiswrapper 1.51-1 (main) from Debian unstable References: <20080104184555.11144.19832.malonedeb@gandwana.ubuntu.com> Message-ID: <20080104222059.18813.75033.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 133110 *** https://bugs.launchpad.net/bugs/133110 bug #133110 -- Please merge ndiswrapper 1.51-1 (main) from Debian unstable https://bugs.launchpad.net/bugs/180407 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From leann at ubuntu.com Fri Jan 4 22:41:55 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Fri, 04 Jan 2008 22:41:55 -0000 Subject: [Bug 21344] Re: Hang when loading ipw2100 References: <20060113141220.21012.9495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080104224155.9713.93198.launchpad@gangotri.ubuntu.com> ** Changed in: linux (Ubuntu) Importance: Undecided => Medium Assignee: (unassigned) => Ubuntu Kernel Network Team (ubuntu-kernel-network) Status: Incomplete => Triaged -- Hang when loading ipw2100 https://bugs.launchpad.net/bugs/21344 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From leann at ubuntu.com Sat Jan 5 01:47:17 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Sat, 05 Jan 2008 01:47:17 -0000 Subject: [Bug 40763] Re: CCMP decrypt failed errors with ipw2200 References: <20060422134633.30538.35482.malonedeb@gangotri.ubuntu.com> Message-ID: <20080105014718.16245.29178.malone@potassium.ubuntu.com> Hardy Heron Alpha2 was recently released. It contains an updated version of the kernel. You can download and try the new Hardy Heron Alpha2 release from http://cdimage.ubuntu.com/releases/hardy/alpha-2/ . You should be able to then test the new kernel via the LiveCD. If you can, please verify if this bug still exists or not and report back your results. General information regarding the release can also be found here: http://www.ubuntu.com/testing/hardy/alpha2 . Thanks! ** Also affects: linux (Ubuntu) Importance: Undecided Status: New ** Changed in: linux (Ubuntu) Status: New => Incomplete -- CCMP decrypt failed errors with ipw2200 https://bugs.launchpad.net/bugs/40763 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From leann at ubuntu.com Sat Jan 5 01:47:34 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Sat, 05 Jan 2008 01:47:34 -0000 Subject: [Bug 40763] Re: CCMP decrypt failed errors with ipw2200 References: <20060422134633.30538.35482.malonedeb@gangotri.ubuntu.com> Message-ID: <20080105014734.9661.35020.malone@gangotri.ubuntu.com> I'm opened a new task against the actively developed kernel and am closing the report against linux-source-2.6.22. Thanks! ** Changed in: linux-source-2.6.22 (Ubuntu) Status: New => Won't Fix -- CCMP decrypt failed errors with ipw2200 https://bugs.launchpad.net/bugs/40763 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From emberez at gmail.com Sat Jan 5 02:58:27 2008 From: emberez at gmail.com (Pedro Fragoso) Date: Sat, 05 Jan 2008 02:58:27 -0000 Subject: [Bug 180407] Re: Please merge ndiswrapper 1.51-1 (main) from Debian unstable References: <20080104184555.11144.19832.malonedeb@gandwana.ubuntu.com> Message-ID: <20080105025827.18813.23310.launchpad@gangotri.ubuntu.com> ** This bug is no longer a duplicate of bug 133110 Merge with Debian -- Please merge ndiswrapper 1.51-1 (main) from Debian unstable https://bugs.launchpad.net/bugs/180407 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From simonwerner at gmail.com Sat Jan 5 06:43:15 2008 From: simonwerner at gmail.com (SimonWerner) Date: Sat, 05 Jan 2008 06:43:15 -0000 Subject: [Bug 45295] Re: PCMCIA does not bring up eth1 during boot References: <20060517191118.15142.67878.malonedeb@gandwana.ubuntu.com> Message-ID: <20080105064315.16353.69137.malone@potassium.ubuntu.com> This is still a problem in Hardy Heron Alpha2. I will attach my dmesg output. ** Attachment added: "Output of dmesg after boot" http://launchpadlibrarian.net/11162706/dmseg.after_boot.txt -- PCMCIA does not bring up eth1 during boot https://bugs.launchpad.net/bugs/45295 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From iwarp62 at gmail.com Sat Jan 5 08:42:08 2008 From: iwarp62 at gmail.com (Kevin Oberle) Date: Sat, 05 Jan 2008 08:42:08 -0000 Subject: [Bug 105977] Re: wpa won't connect -- wep connects -- ndiswrapper References: <20070412203939.19383.19971.malonedeb@gandwana.ubuntu.com> Message-ID: <20080105084208.6444.43299.malone@gandwana.ubuntu.com> I'm not sure the exact protocol here but this bug was for sure fixed in gutsy. Should EljoPc be posting a new bug? Regardless, I will try this on my system on sunday and report back. -- wpa won't connect -- wep connects -- ndiswrapper https://bugs.launchpad.net/bugs/105977 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From info at ccamstelveen.nl Sat Jan 5 13:08:55 2008 From: info at ccamstelveen.nl (EljoPc) Date: Sat, 05 Jan 2008 13:08:55 -0000 Subject: [Bug 105977] Re: wpa won't connect -- wep connects -- ndiswrapper References: <20070412203939.19383.19971.malonedeb@gandwana.ubuntu.com> Message-ID: <20080105130855.6444.64676.malone@gandwana.ubuntu.com> I did some testing with an other system (laptop). I loaded Ubuntu from cd and could connect WPA automatic. (other wifi driver in laptop). Don't know if this helps but its some extra info. I wanted to test the idea's from Andreas but the system automatic connects to my other wifi router (non secure) and I have not found jet how to disconnect. If i now go to the wifi settings the window is totally greyed out. -- wpa won't connect -- wep connects -- ndiswrapper https://bugs.launchpad.net/bugs/105977 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From pludwiko at rab.ict.pwr.wroc.pl Sat Jan 5 14:02:13 2008 From: pludwiko at rab.ict.pwr.wroc.pl (Pawel Ludwikow) Date: Sat, 05 Jan 2008 14:02:13 -0000 Subject: [Bug 180564] kernel 2.6.22-14-generic doesn't restart timer after suspend-to-ram References: <20080105140213.16245.33403.malonedeb@potassium.ubuntu.com> Message-ID: <20080105140213.16245.33403.malonedeb@potassium.ubuntu.com> Public bug reported: After suspend-to-ram kernel 2.6.22-14-generic doesn't start the system timer. The waking procedure takes some key pressing and/or mouse movements to proceed. Previous version 2.6.20-16-generic [from ubuntu 7.04] worked perfectly on this hardware. System configuration: ubuntu 7.10 (upgraded from 7.04) hardware: thinkpad/lenovo R60e /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 14 model name : Intel(R) Celeron(R) M CPU 420 @ 1.60GHz stepping : 8 cpu MHz : 1596.134 cache size : 1024 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx constant_tsc up pni monitor tm2 xtpr bogomips : 3195.67 clflush size : 64 ==== and here is the proof ==== $ while true; do date; grep timer /proc/interrupts ; sleep 1; done So, 5 sty 2008, 14:32:26 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:32:27 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:32:28 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:32:29 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:32:30 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:32:31 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:32:32 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:32:33 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:32:34 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:32:36 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:32:40 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:32:45 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:32:47 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:32:52 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:32:56 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:33:03 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:33:07 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:33:09 CET 0: 4488609 IO-APIC-edge timer So, 5 sty 2008, 14:33:10 CET ========= Expected result: interrupt count from system timer increases at least by 100 and time increases by 1 second. Effect occurs: always after suspend-to-ram Curiously, if a suspend-to-disk is made after that, the system reverts to normal functioning. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- kernel 2.6.22-14-generic doesn't restart timer after suspend-to-ram https://bugs.launchpad.net/bugs/180564 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From aleksander.adamowski at olo.org.pl Sat Jan 5 14:18:30 2008 From: aleksander.adamowski at olo.org.pl (AleksanderAdamowski) Date: Sat, 05 Jan 2008 14:18:30 -0000 Subject: [Bug 180569] Kernel OOPS when mounting NFSv4 share with Kerberos 5 authentication References: <20080105141830.16245.86803.malonedeb@potassium.ubuntu.com> Message-ID: <20080105141830.16245.86803.malonedeb@potassium.ubuntu.com> Public bug reported: I have an NFSv4 setup with Kerberos 5 authentication that has worked fine in Ubuntu Feisty Fawn. On Ubuntu Gutsy, however, I get a kernel OOPS when I issue the mount command: mount -t nfs4 -o sec=krb5i,proto=tcp,port=2049,soft,async,rsize=32768,wsize=32768 SERVERNAME:/ /var/nfs/SERVERNAME/home The output in syslog: Jan 5 15:09:07 laptop rpc.gssd[6834]: handling krb5 upcall Jan 5 15:09:07 laptop rpc.gssd[6834]: Full hostname for 'SERVERNAME' is 'SERVERNAME' Jan 5 15:09:07 laptop rpc.gssd[6834]: Full hostname for 'localhost.localdomain' is 'localhost.localdomain' Jan 5 15:09:07 laptop rpc.gssd[6834]: Key table entry not found while getting keytab entry for 'root/localhost.localdomain at KRBREALM' Jan 5 15:09:07 laptop rpc.gssd[6834]: Key table entry not found while getting keytab entry for 'nfs/localhost.localdomain at KRBREALM' Jan 5 15:09:07 laptop rpc.gssd[6834]: Key table entry not found while getting keytab entry for 'host/localhost.localdomain at KRBREALM' Jan 5 15:09:07 laptop rpc.gssd[6834]: Success getting keytab entry for nfs/*@KRBREALM Jan 5 15:09:07 laptop rpc.gssd[6834]: Successfully obtained machine credentials for principal 'nfs/laptop.KRBREALM at KRBREALM' stored in ccache 'FILE:/tmp/krb5cc_machine_KRBREALM' Jan 5 15:09:07 laptop rpc.gssd[6834]: INFO: Credentials in CC 'FILE:/tmp/krb5cc_machine_KRBREALM' are good until 1231078147 Jan 5 15:09:07 laptop rpc.gssd[6834]: using FILE:/tmp/krb5cc_machine_KRBREALM as credentials cache for machine creds Jan 5 15:09:07 laptop rpc.gssd[6834]: using environment variable to select krb5 ccache FILE:/tmp/krb5cc_machine_KRBREALM Jan 5 15:09:07 laptop rpc.gssd[6834]: creating context using fsuid 0 (save_uid 0) Jan 5 15:09:07 laptop rpc.gssd[6834]: creating tcp client for server SERVERNAME Jan 5 15:09:07 laptop rpc.gssd[6834]: creating context with server nfs at SERVERNAME Jan 5 15:09:07 laptop rpc.gssd[6834]: DEBUG: serialize_krb5_ctx: lucid version! Jan 5 15:09:07 laptop rpc.gssd[6834]: prepare_krb5_rfc1964_buffer: serializing keys with enctype 4 and length 8 Jan 5 15:09:07 laptop rpc.gssd[6834]: doing downcall Jan 5 15:09:07 laptop rpc.idmapd[6826]: nss_getpwnam: name '0' does not map into domain 'localdomain' Jan 5 15:09:07 laptop rpc.gssd[6834]: destroying client clnt1 Jan 5 15:09:07 laptop rpc.gssd[6834]: destroying client clnt0 Jan 5 15:09:07 laptop kernel: [ 250.244000] BUG: unable to handle kernel paging request at virtual address 0a30747a Jan 5 15:09:07 laptop kernel: [ 250.244000] printing eip: Jan 5 15:09:07 laptop kernel: [ 250.244000] f8e1d043 Jan 5 15:09:07 laptop kernel: [ 250.244000] *pde = 00000000 Jan 5 15:09:07 laptop kernel: [ 250.244000] Oops: 0000 [#1] Jan 5 15:09:07 laptop kernel: [ 250.244000] SMP Jan 5 15:09:07 laptop kernel: [ 250.244000] Modules linked in: des cbc michael_mic arc4 ecb blkcipher ieee80211_crypt_tkip ieee80211_crypt_ccmp af_packet hci_usb binfmt_misc rfcomm l2cap bluetooth usbhid hid ppdev radeon drm acpi_cpufreq cpufreq_userspace cpufreq_stats cpufreq_ondemand cpufreq_conservative cpufreq_powersave freq_table container video button sbs dock ac battery smsc_ircc2 rpcsec_gss_krb5 auth_rpcgss nfs lockd sunrpc ip6table_filter iptable_raw xt_comment xt_policy xt_multiport ipt_ULOG ipt_TTL ipt_ttl ipt_TOS ipt_tos ipt_SAME ipt_REJECT ipt_REDIRECT ipt_recent ipt_owner ipt_NETMAP ipt_MASQUERADE ipt_LOG ipt_iprange ipt_ECN ipt_ecn ipt_CLUSTERIP ipt_ah ipt_addrtype nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_pptp nf_nat_proto_gre nf_nat_irc nf_nat_h323 nf_nat_ftp nf_nat_amanda ts_kmp nf_conntrack_amanda nf_conntrack_tftp nf_conntrack_sip nf_conntrack_proto_sctp nf_conntrack_pptp nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_netbios_ns nf_conntrack_irc nf_conntrack_h323 ipv6 nf_co Jan 5 15:09:07 laptop kernel: ntrack_ftp xt_tcpmss xt_pkttype xt_physdev xt_NFQUEUE xt_NFLOG xt_MARK xt_mark xt_mac xt_limit xt_length xt_helper xt_hashlimit ip6_tables xt_dccp xt_conntrack xt_CONNMARK xt_connmark xt_CLASSIFY xt_tcpudp xt_state iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack iptable_mangle nfnetlink iptable_filter ip_tables x_tables aes_i586 dm_crypt dm_mod loop sbp2 lp snd_intel8x0 snd_ac97_codec pcmcia ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy joydev snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event irtty_sir sir_dev pcspkr parport_pc snd_seq snd_timer snd_seq_device parport irda crc_ccitt yenta_socket rsrc_nonstatic pcmcia_core iTCO_wdt iTCO_vendor_support psmouse tifm_7xx1 tifm_core serio_raw snd soundcore snd_page_alloc sdhci mmc_core ipw2200 ieee80211 ieee80211_crypt shpchp pci_hotplug intel_agp agpgart evdev ext3 jbd mbcache sg sr_mod cdrom sd_mod ata_piix ohci1394 ata_generic libata scsi_mod ieee1394 ehci_hcd uhci_hcd usbcore tg3 thermal processor fan fuse apparm Jan 5 15:09:07 laptop kernel: ommoncap Jan 5 15:09:07 laptop kernel: [ 250.244000] CPU: 0 Jan 5 15:09:07 laptop kernel: [ 250.244000] EIP: 0060:[] Not tainted VLI Jan 5 15:09:07 laptop kernel: [ 250.244000] EFLAGS: 00010206 (2.6.22-14-generic #1) Jan 5 15:09:07 laptop kernel: [ 250.244000] EIP is at nfs_fhget+0xd3/0x3e0 [nfs] Jan 5 15:09:07 laptop kernel: [ 250.244000] eax: 0a30746e ebx: 00000000 ecx: f5f04a74 edx: 00004180 Jan 5 15:09:07 laptop kernel: [ 250.244000] esi: f5f04a00 edi: f5e8dbd4 ebp: f5977128 esp: f5e8db88 Jan 5 15:09:07 laptop kernel: [ 250.244000] ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Jan 5 15:09:07 laptop kernel: [ 250.244000] Process mount.nfs4 (pid: 8861, ti=f5e8c000 task=f58d14c0 task.ti=f5e8c000) Jan 5 15:09:07 laptop kernel: [ 250.244000] Stack: f8e1cf10 f5e8dbac 0000000a c0139679 c20109dc f5977000 ffffcf69 c043c950 Jan 5 15:09:07 laptop kernel: [ 250.244000] c012dc04 f5e8dc66 f5e8dbd4 f5e8dbd4 f5f04a00 f5e8dc64 f5e8dd1e f8e1b8d7 Jan 5 15:09:07 laptop kernel: [ 250.244000] f58d1680 c200a000 f5f03600 00000002 00000000 00000000 00000000 00000000 Jan 5 15:09:07 laptop kernel: [ 250.244000] Call Trace: Jan 5 15:09:07 laptop kernel: [ 250.244000] [] nfs_init_locked+0x0/0x60 [nfs] Jan 5 15:09:07 laptop kernel: [ 250.244000] [__rcu_process_callbacks+105/464] __rcu_process_callbacks+0x69/0x1d0 Jan 5 15:09:07 laptop kernel: [ 250.244000] [tasklet_action+84/192] tasklet_action+0x54/0xc0 Jan 5 15:09:07 laptop kernel: [ 250.244000] [] nfs4_get_root+0x177/0x260 [nfs] Jan 5 15:09:07 laptop kernel: [ 250.244000] [] nfs4_get_sb+0x291/0x370 [nfs] Jan 5 15:09:07 laptop kernel: [ 250.244000] [vfs_kern_mount+182/304] vfs_kern_mount+0xb6/0x130 Jan 5 15:09:07 laptop kernel: [ 250.244000] [do_kern_mount+63/240] do_kern_mount+0x3f/0xf0 Jan 5 15:09:07 laptop kernel: [ 250.244000] [do_mount+1643/1856] do_mount+0x66b/0x740 Jan 5 15:09:07 laptop kernel: [ 250.244000] [tcp_v4_send_check+68/240] tcp_v4_send_check+0x44/0xf0 Jan 5 15:09:07 laptop kernel: [ 250.244000] [tcp_transmit_skb+1017/2048] tcp_transmit_skb+0x3f9/0x800 Jan 5 15:09:07 laptop kernel: [ 250.244000] [kunmap_atomic+94/160] kunmap_atomic+0x5e/0xa0 Jan 5 15:09:07 laptop kernel: [ 250.244000] [kunmap_atomic+106/160] kunmap_atomic+0x6a/0xa0 Jan 5 15:09:07 laptop kernel: [ 250.244000] [__handle_mm_fault+1671/2816] __handle_mm_fault+0x687/0xb00 Jan 5 15:09:07 laptop kernel: [ 250.244000] [__mod_timer+159/176] __mod_timer+0x9f/0xb0 Jan 5 15:09:07 laptop kernel: [ 250.244000] [do_page_fault+905/1680] do_page_fault+0x389/0x690 Jan 5 15:09:07 laptop kernel: [ 250.244000] [error_code+114/128] error_code+0x72/0x80 Jan 5 15:09:07 laptop kernel: [ 250.244000] [clip_constructor+8/160] clip_constructor+0x8/0xa0 Jan 5 15:09:07 laptop kernel: [ 250.244000] [copy_mount_options+171/336] copy_mount_options+0xab/0x150 Jan 5 15:09:07 laptop kernel: [ 250.244000] [sys_mount+119/192] sys_mount+0x77/0xc0 Jan 5 15:09:07 laptop kernel: [ 250.244000] [sysenter_past_esp+107/169] sysenter_past_esp+0x6b/0xa9 Jan 5 15:09:07 laptop kernel: [ 250.244000] ======================= Jan 5 15:09:07 laptop kernel: [ 250.244000] Code: ff 89 44 24 14 89 54 24 18 81 8d 3c 01 00 00 82 00 00 00 89 5d 20 8b 57 20 66 89 55 6a 8b 86 64 01 00 00 0f b7 d2 8b 00 8b 40 38 <8b> 40 0c 89 85 90 00 00 00 89 d0 25 00 f0 00 00 3d 00 80 00 00 Jan 5 15:09:07 laptop kernel: [ 250.244000] EIP: [] nfs_fhget+0xd3/0x3e0 [nfs] SS:ESP 0068:f5e8db88 ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- Kernel OOPS when mounting NFSv4 share with Kerberos 5 authentication https://bugs.launchpad.net/bugs/180569 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From geoff at galexy.net Sat Jan 5 15:35:35 2008 From: geoff at galexy.net (Geoff Shuetrim) Date: Sat, 05 Jan 2008 15:35:35 -0000 Subject: [Bug 180281] Re: Intel HDA soundcard produces no sound with Ubuntu 7.10 Generic References: <20080104075718.6444.43169.malonedeb@gandwana.ubuntu.com> Message-ID: <20080105153535.16245.93699.malone@potassium.ubuntu.com> I have spent some time fiddling around with alsamixer, unmuting everything and then remuting front. The sound then worked OK. I then unmuted front again and sound continued to work OK. Not quite sure what is going on with that but it did seem to result in good sound again. ** Changed in: linux-meta (Ubuntu) Assignee: (unassigned) => Geoff Shuetrim (geoff-galexy) Status: New => Invalid -- Intel HDA soundcard produces no sound with Ubuntu 7.10 Generic https://bugs.launchpad.net/bugs/180281 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From 84yelo3 at gmail.com Sat Jan 5 17:56:05 2008 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Sat, 05 Jan 2008 17:56:05 -0000 Subject: [Bug 157191] Re: please enable CONFIG_TASKSTATS, especially CONFIG_TASK_IO_ACCOUNTING References: <20071025192852.32502.72807.malonedeb@gangotri.ubuntu.com> Message-ID: <20080105175605.16245.40301.malone@potassium.ubuntu.com> yes, please! I also think it is a great option! -- please enable CONFIG_TASKSTATS, especially CONFIG_TASK_IO_ACCOUNTING https://bugs.launchpad.net/bugs/157191 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From mocanu_Leonard at yahoo.com Sat Jan 5 18:14:08 2008 From: mocanu_Leonard at yahoo.com (Leo) Date: Sat, 05 Jan 2008 18:14:08 -0000 Subject: [Bug 27784] Re: [acpi] System freezes while booting from Kubuntu install CD References: <20060113151915.29386.10182.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080105181408.9713.11045.malone@gangotri.ubuntu.com> happens to me 2...when i boot from Ubuntu , kubuntu , Xubuntu cd for install the computer freezes In fedora i had the same problem but when i enter interactive startup and disable cpuspeed i works Any suggestions on ubuntu ? -- [acpi] System freezes while booting from Kubuntu install CD https://bugs.launchpad.net/bugs/27784 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From pludwiko at rab.ict.pwr.wroc.pl Sat Jan 5 19:29:51 2008 From: pludwiko at rab.ict.pwr.wroc.pl (Pawel Ludwikow) Date: Sat, 05 Jan 2008 19:29:51 -0000 Subject: [Bug 180564] Re: kernel 2.6.22-14-generic doesn't restart timer after suspend-to-ram References: <20080105140213.16245.33403.malonedeb@potassium.ubuntu.com> Message-ID: <20080105192951.9713.78949.malone@gangotri.ubuntu.com> And here is the same system after ADDITIONAL suspend-to-disk: $ while true; do date; grep timer /proc/interrupts ; sleep 1; done So, 5 sty 2008, 20:19:48 CET 0: 4871629 IO-APIC-edge timer So, 5 sty 2008, 20:19:49 CET 0: 4871848 IO-APIC-edge timer So, 5 sty 2008, 20:19:50 CET 0: 4872057 IO-APIC-edge timer So, 5 sty 2008, 20:19:51 CET 0: 4872272 IO-APIC-edge timer So, 5 sty 2008, 20:19:52 CET 0: 4872493 IO-APIC-edge timer So, 5 sty 2008, 20:19:53 CET 0: 4872712 IO-APIC-edge timer So, 5 sty 2008, 20:19:54 CET 0: 4872925 IO-APIC-edge timer So, 5 sty 2008, 20:19:55 CET 0: 4873073 IO-APIC-edge timer So, 5 sty 2008, 20:19:56 CET 0: 4873285 IO-APIC-edge timer So, 5 sty 2008, 20:19:57 CET 0: 4873506 IO-APIC-edge timer So, 5 sty 2008, 20:19:58 CET 0: 4873709 IO-APIC-edge timer So, 5 sty 2008, 20:19:59 CET 0: 4873922 IO-APIC-edge timer So, 5 sty 2008, 20:20:00 CET 0: 4874129 IO-APIC-edge timer So, 5 sty 2008, 20:20:01 CET 0: 4874326 IO-APIC-edge timer So, 5 sty 2008, 20:20:02 CET 0: 4874537 IO-APIC-edge timer So, 5 sty 2008, 20:20:03 CET 0: 4874748 IO-APIC-edge timer So, 5 sty 2008, 20:20:04 CET 0: 4874957 IO-APIC-edge timer -- kernel 2.6.22-14-generic doesn't restart timer after suspend-to-ram https://bugs.launchpad.net/bugs/180564 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From rondom at rondom.de Sat Jan 5 19:47:23 2008 From: rondom at rondom.de (Andreas Gnau) Date: Sat, 05 Jan 2008 19:47:23 -0000 Subject: [Bug 105977] Re: wpa won't connect -- wep connects -- ndiswrapper References: <20070412203939.19383.19971.malonedeb@gandwana.ubuntu.com> Message-ID: <20080105194723.16353.47586.malone@potassium.ubuntu.com> Yeah, the initial bug is fixed and this is no support forum. Please file a new bugreport. -- wpa won't connect -- wep connects -- ndiswrapper https://bugs.launchpad.net/bugs/105977 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From sebastian.ro at gmx.de Sat Jan 5 23:24:13 2008 From: sebastian.ro at gmx.de (Sebastian Rode) Date: Sat, 05 Jan 2008 23:24:13 -0000 Subject: [Bug 64093] Re: Kernel message, Ubuntu 6.06 Dapper References: <20061005025134.5185.33204.malonedeb@gangotri.ubuntu.com> Message-ID: <20080105232413.8917.31442.malone@gangotri.ubuntu.com> I agree this message is harmless ** Changed in: linux-source-2.6.15 (Ubuntu) Status: New => Invalid -- Kernel message, Ubuntu 6.06 Dapper https://bugs.launchpad.net/bugs/64093 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From goalieca at gmail.com Sun Jan 6 02:54:08 2008 From: goalieca at gmail.com (goalieca) Date: Sun, 06 Jan 2008 02:54:08 -0000 Subject: [Bug 83290] Re: [gutsy] kernel 2.6.20 and 2.6.22 problem on asus centrino References: <20070204195735.4882.1300.malonedeb@gangotri.ubuntu.com> Message-ID: <20080106025408.6544.92733.malone@gandwana.ubuntu.com> I am typing this from inside alpha2 on the live cd. So it seems to be working. -- [gutsy] kernel 2.6.20 and 2.6.22 problem on asus centrino https://bugs.launchpad.net/bugs/83290 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From volvoguy at gmail.com Sun Jan 6 06:30:11 2008 From: volvoguy at gmail.com (Aaron Waite) Date: Sun, 06 Jan 2008 06:30:11 -0000 Subject: [Bug 19749] Re: SATA HDD not recognized during Breezy Colony 4 install or Dapper Flight 3 or Edgy Eft or Feisty Fawn References: <20060113140316.21012.69844.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080106063011.16353.29882.malone@potassium.ubuntu.com> Well, I have some good news. :-) Hardy Heron Alpha 2 LiveCD installed just fine this time. Recently the problem hasn't been during install with the live cd, but with booting into the system after install. With Alpha 2 everything seems to work great! If possible though I'd like to hold off closing this bug until further into development or the final release. We've had things working during development before, only to have them broken for the final release. That's just my opinion - you guys are the bosses. If there's any logs or anything you need from me, let me know and I'll get them for you. Good work! -- SATA HDD not recognized during Breezy Colony 4 install or Dapper Flight 3 or Edgy Eft or Feisty Fawn https://bugs.launchpad.net/bugs/19749 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From mshanker at kent.edu Sun Jan 6 07:06:07 2008 From: mshanker at kent.edu (Murali) Date: Sun, 06 Jan 2008 07:06:07 -0000 Subject: [Bug 33372] Re: Cannot wake up from suspend and hibernate References: <20060302085058.17498.86100.malonedeb@gangotri.ubuntu.com> Message-ID: <20080106070607.16353.21536.malone@potassium.ubuntu.com> Machine: Toshiba Protege M200 Kernel: Linux version 2.6.22-14-generic (buildd at terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Distribution: 7.10 It was working fine in the older versions of Ubuntu, and even when I upgraded to 7.10. I now had to reinstall 7.10 completely, after trying 8.04 alpha. In 7.10 now, my experiences for Hibernation and Suspend are similar to many of the posts above. The screen remains completely blank, and while there is harddrive activity, I can't see anything on the screen. The only option that works is to poweroff and restart. When I tried 8.04 alpha version with the 2.6.24 development kernel, the issue was again similar. I do have the nvidia restricted driver on -- Cannot wake up from suspend and hibernate https://bugs.launchpad.net/bugs/33372 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From jpcc at bigfoot.com Sun Jan 6 13:38:37 2008 From: jpcc at bigfoot.com (John Carlyle-Clarke) Date: Sun, 06 Jan 2008 13:38:37 -0000 Subject: [Bug 24776] Re: ipw2100 error Fatal interrupt. Scheduling firmware restart. References: <20060113143045.21012.26338.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080106133837.6544.74336.malone@gandwana.ubuntu.com> This seems to be reported: http://bughost.org/bugzilla/show_bug.cgi?id=1487 I have the same problem on Gutsy with a Sony Vaio using WPA. Have not tried WEP or plain yet for comparison. Card seems to fail when large(ish) amounts of data are transferred and only a reboot will cure it. -- ipw2100 error Fatal interrupt. Scheduling firmware restart. https://bugs.launchpad.net/bugs/24776 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From mail at artificialworlds.net Sun Jan 6 16:46:55 2008 From: mail at artificialworlds.net (Andy Balaam) Date: Sun, 06 Jan 2008 16:46:55 -0000 Subject: [Bug 63666] Re: Hauppauge WinTV Nova-T not recognised in Edgy References: <20061003011200.2244.13034.malonedeb@gangotri.ubuntu.com> Message-ID: <20080106164655.16245.7918.malone@potassium.ubuntu.com> Works fine in Gutsy, so closing this bug. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: New => Fix Released -- Hauppauge WinTV Nova-T not recognised in Edgy https://bugs.launchpad.net/bugs/63666 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From joaoluispinto at gmail.com Mon Jan 7 01:29:58 2008 From: joaoluispinto at gmail.com (=?utf-8?b?Sm/Do28gTHXDrXMgUGludG8=?=) Date: Mon, 07 Jan 2008 01:29:58 -0000 Subject: [Bug 24776] Re: ipw2100 error Fatal interrupt. Scheduling firmware restart. References: <20060113143045.21012.26338.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080107012958.16353.3150.malone@potassium.ubuntu.com> I have a similar problem with an ASUS centrino laptop. Wireless networks are scanned OK and appear in NetworkManager, but trying to connect to my AP (using WPA) doesn't work (no green lights whatsoever, and the authentication dialog keeps reapearing). It's a fresh install, made a few hours ago, with all the updates (installed using a wired connection). The old install (Ubuntu, don't remember which release), initialy worked perfectly for a long while, but stopped working (eventualy after an update) and got shelfed until this clean install. The laptop is a dual boot machine, and Windows access is working OK. I would be happy to help with any required info. -- ipw2100 error Fatal interrupt. Scheduling firmware restart. https://bugs.launchpad.net/bugs/24776 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From george.girtsou at gmail.com Mon Jan 7 03:22:20 2008 From: george.girtsou at gmail.com (George Girtsou) Date: Mon, 07 Jan 2008 03:22:20 -0000 Subject: [Bug 38884] Re: rtl818x - System hangs when uploading files. References: <20060409144601.32233.18688.malonedeb@gandwana.ubuntu.com> Message-ID: <20080107032220.16245.34353.malone@potassium.ubuntu.com> Hello. I am facing also facing this issue. My kernel version is 2.6.22-14-generic and I'm using my laptop -- this never happened to my desktop pc. My CPU is Intel Core Duo, Memory 494.3MB, and Ubuntu release is gutsy (7.10) and Gnome version is 2.20.1. This doesn't happen always. It sometimes happens when I try to upload files via FTP using FileZilla or KftpGrabber or via HTTP using Firefox. The computer completely freezes and I get no errors and I have to turn off the laptop holding the power button. Please tell me what I need to do. -- rtl818x - System hangs when uploading files. https://bugs.launchpad.net/bugs/38884 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From bugwatch at bugs.launchpad.net Mon Jan 7 09:49:41 2008 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Mon, 07 Jan 2008 09:49:41 -0000 Subject: [Bug 27940] Re: problems with hdparm and udev during boot References: <20060113151959.29386.83524.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080107100336.19671.501.launchpad@forster.canonical.com> ** Changed in: linux-source-2.6.15 (Debian) Status: New => Fix Released -- problems with hdparm and udev during boot https://bugs.launchpad.net/bugs/27940 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From daniel.holbach at ubuntu.com Mon Jan 7 10:45:42 2008 From: daniel.holbach at ubuntu.com (Daniel Holbach) Date: Mon, 07 Jan 2008 10:45:42 -0000 Subject: [Bug 180407] Re: Please merge ndiswrapper 1.51-1 (main) from Debian unstable References: <20080104184555.11144.19832.malonedeb@gandwana.ubuntu.com> Message-ID: <20080107104542.23291.77865.malone@gangotri.ubuntu.com> Kernel Team: can you guys take a look into this one? -- Please merge ndiswrapper 1.51-1 (main) from Debian unstable https://bugs.launchpad.net/bugs/180407 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From mstempin at web.de Mon Jan 7 11:11:21 2008 From: mstempin at web.de (Lebowski) Date: Mon, 07 Jan 2008 11:11:21 -0000 Subject: [Bug 83290] Re: [gutsy] kernel 2.6.20 and 2.6.22 problem on asus centrino References: <20070204195735.4882.1300.malonedeb@gangotri.ubuntu.com> Message-ID: <20080107111121.6544.76239.malone@gandwana.ubuntu.com> I can confirm that it is working with Alpha2 of Hardy Heron. No more "nolapic" needed. Hopefully it stays that way since the 2.6.24 kernel is still in development. -- [gutsy] kernel 2.6.20 and 2.6.22 problem on asus centrino https://bugs.launchpad.net/bugs/83290 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From fcolcord at gmail.com Mon Jan 7 12:51:16 2008 From: fcolcord at gmail.com (fcolcord) Date: Mon, 07 Jan 2008 12:51:16 -0000 Subject: [Bug 36964] Re: [dapper] Asus sd/mmc card reader not working References: <20060328082753.6253.5275.malonedeb@gandwana.ubuntu.com> Message-ID: <20080107125116.18064.3403.malone@gangotri.ubuntu.com> I would like to ask for this to work as well. I did a plain vanilla Gutsy install on a Dell x300 and the SD Card reader doesn't work. This bug seems linked to bug 153341 (https://bugs.launchpad.net/ubuntu/+source/linux- source-2.6.22/+bug/153341) I can see the project on source forge, but don't know enough about linux to do it myself. http://sourceforge.net/project/showfiles.php?group_id=190281 the home page does not talk about ubuntu or debian package http://sdricohcs.sourceforge.net/ I can't see clear instructions on the pages above which will help me. Can anyone else give me the steps I should follow? thanks, Frank -- [dapper] Asus sd/mmc card reader not working https://bugs.launchpad.net/bugs/36964 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From owhno at steenbe.nl Mon Jan 7 14:05:14 2008 From: owhno at steenbe.nl (osteenbergen) Date: Mon, 07 Jan 2008 14:05:14 -0000 Subject: [Bug 180407] Re: Please merge ndiswrapper 1.51-1 (main) from Debian unstable References: <20080104184555.11144.19832.malonedeb@gandwana.ubuntu.com> Message-ID: <20080107140514.16245.59193.malone@potassium.ubuntu.com> Hardy crashes if ndiswrapper module 1.45 is used (2.6.24-2-generic #1 SMP kernel) Total system hang. No switch to tty. if switch works ik hangs after typing a command. Upgrade to 1.5 fixes this issue. -- Please merge ndiswrapper 1.51-1 (main) from Debian unstable https://bugs.launchpad.net/bugs/180407 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From dufresnep at gmail.com Mon Jan 7 17:58:47 2008 From: dufresnep at gmail.com (Paul Dufresne) Date: Mon, 07 Jan 2008 17:58:47 -0000 Subject: [Bug 42023] Re: attempt to access beyond end of device on DVD References: <20060429095912.30638.41865.malonedeb@gangotri.ubuntu.com> Message-ID: <20080107175847.18064.42551.malone@gangotri.ubuntu.com> We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Thanks again! ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Incomplete => Invalid ** Changed in: linux-source-2.6.22 (Ubuntu) Status: Incomplete => Invalid ** Changed in: k3b (Ubuntu) Status: Incomplete => Invalid -- attempt to access beyond end of device on DVD https://bugs.launchpad.net/bugs/42023 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From dufresnep at gmail.com Mon Jan 7 18:23:11 2008 From: dufresnep at gmail.com (Paul Dufresne) Date: Mon, 07 Jan 2008 18:23:11 -0000 Subject: [Bug 48370] Re: Unable to umount/sync USB storage after writing data in Dapper References: <20060604145949.2224.22268.malonedeb@gangotri.ubuntu.com> Message-ID: <20080107182311.18492.63975.malone@gangotri.ubuntu.com> Antoni, did you have to remove ehci_hcd module too? Initial bug seems to be a duplicate of bug #54419 . As initial reporter did not come back, it is a bit hard to confirmed. In fact bug #54419 should probably be split in two, those for which adding irqpoll in boot options fix the problem, and the others for which it does not. ** This bug has been marked a duplicate of bug 54419 usb change between 2.6.15-23 and 2.6.15-26 breaks working setup ** This bug is no longer a duplicate of bug 54419 usb change between 2.6.15-23 and 2.6.15-26 breaks working setup -- Unable to umount/sync USB storage after writing data in Dapper https://bugs.launchpad.net/bugs/48370 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From dufresnep at gmail.com Mon Jan 7 18:27:56 2008 From: dufresnep at gmail.com (Paul Dufresne) Date: Mon, 07 Jan 2008 18:27:56 -0000 Subject: [Bug 48370] Re: Unable to umount/sync USB storage after writing data in Dapper References: <20060604145949.2224.22268.malonedeb@gangotri.ubuntu.com> Message-ID: <20080107182756.16245.24934.malone@potassium.ubuntu.com> Oh well, this is similar to bug #54419, but then, no one have express having problems unmounting device after removing ehci_hcd module. So unmarking duplicate for now. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: New => Incomplete -- Unable to umount/sync USB storage after writing data in Dapper https://bugs.launchpad.net/bugs/48370 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From dufresnep at gmail.com Mon Jan 7 20:22:19 2008 From: dufresnep at gmail.com (Paul Dufresne) Date: Mon, 07 Jan 2008 20:22:19 -0000 Subject: [Bug 56188] Re: Wrong implementation of sys_acct() linux-syscall. Discrepancies between kernel-space & user-space. References: <20060813025119.20172.48739.malonedeb@gandwana.ubuntu.com> Message-ID: <20080107202220.6544.99829.malone@gandwana.ubuntu.com> Well, I personnaly don't see what this has to do with GLib, but original poster seems to agree with Ben. As there is no answer I would normally close the bug, but since the bug contains pretty clear example, I'll rather confirm it on glibc, letting glibc developer take a look. ** Changed in: glibc (Ubuntu) Assignee: Paul Dufresne (dufresnep) => (unassigned) Status: Incomplete => Confirmed -- Wrong implementation of sys_acct() linux-syscall. Discrepancies between kernel-space & user-space. https://bugs.launchpad.net/bugs/56188 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From kimbledon at hotmail.com Mon Jan 7 21:53:23 2008 From: kimbledon at hotmail.com (kimbledon) Date: Mon, 07 Jan 2008 21:53:23 -0000 Subject: [Bug 88530] Re: USB ports: connect-debounce failed, port disabled References: <20070227225858.22094.98179.malonedeb@gandwana.ubuntu.com> Message-ID: <20080107215324.6544.1901.malone@gandwana.ubuntu.com> You talked about the bios firmware update. Where can I find that bootable .iso file? -- USB ports: connect-debounce failed, port disabled https://bugs.launchpad.net/bugs/88530 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From tfishwall at yahoo.com Mon Jan 7 21:57:14 2008 From: tfishwall at yahoo.com (dragon76) Date: Mon, 07 Jan 2008 21:57:14 -0000 Subject: [Bug 181114] virtual terminals and dpms resume video scrambled References: <20080107215714.6444.4795.malonedeb@gandwana.ubuntu.com> Message-ID: <20080107215714.6444.4795.malonedeb@gandwana.ubuntu.com> Public bug reported: I am running Hardy Alpha on an amd x2 Turion notebook with geforce 6100 Go chipset. Kernel version is 2.6.24-2-generic. Using nvidia restricted drivers. The video is scrambled on all of the virtual consoles and they are unusable. Xorg is fine except when resuming from DPMS screen blanking the video is scrambled. If I switch to a virtual console and back it corrects itself, but I have yet to find a way to solve the virtual console issue. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- virtual terminals and dpms resume video scrambled https://bugs.launchpad.net/bugs/181114 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From dufresnep at gmail.com Mon Jan 7 22:28:32 2008 From: dufresnep at gmail.com (Paul Dufresne) Date: Mon, 07 Jan 2008 22:28:32 -0000 Subject: [Bug 58018] Re: Can not mount DVD Media after burning. References: <20060828165801.17263.43025.malonedeb@gangotri.ubuntu.com> Message-ID: <20080107222832.6444.13462.malone@gandwana.ubuntu.com> We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Thanks again! ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Incomplete => Invalid -- Can not mount DVD Media after burning. https://bugs.launchpad.net/bugs/58018 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From jeffersonjbj at gmail.com Tue Jan 8 00:59:30 2008 From: jeffersonjbj at gmail.com (Jefferson Martins de Oliveira) Date: Tue, 08 Jan 2008 00:59:30 -0000 Subject: [Bug 31440] Re: sdhci module and ENE CB-710 PCMCIA card reader References: <20060214213807.2410.52669.malonedeb@gangotri.ubuntu.com> Message-ID: <20080108005930.7546.89031.malone@gangotri.ubuntu.com> I have same problem in Ubuntu Gutsy. -- sdhci module and ENE CB-710 PCMCIA card reader https://bugs.launchpad.net/bugs/31440 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From gQuigs at gMail.com Tue Jan 8 02:38:26 2008 From: gQuigs at gMail.com (gQuigs) Date: Tue, 08 Jan 2008 02:38:26 -0000 Subject: [Bug 58064] Re: loss of Ethernet in Armada 6500 References: <20060829021941.5577.7881.malonedeb@gandwana.ubuntu.com> Message-ID: <20080108023826.25248.22540.malone@gandwana.ubuntu.com> Thank you for taking the time to report this bug and helping to make Ubuntu better. You reported this bug a while ago and there hasn't been any activity in it recently. We were wondering is this still an issue for you? Can you try with latest Ubuntu release? Thanks in advance. -- loss of Ethernet in Armada 6500 https://bugs.launchpad.net/bugs/58064 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From gQuigs at gMail.com Tue Jan 8 02:35:35 2008 From: gQuigs at gMail.com (gQuigs) Date: Tue, 08 Jan 2008 02:35:35 -0000 Subject: [Bug 56441] Re: Cannot mount SATA disk as a root References: <20060815115109.24756.13886.malonedeb@gangotri.ubuntu.com> Message-ID: <20080108023535.16353.27725.malone@potassium.ubuntu.com> Thank you for taking the time to report this bug and helping to make Ubuntu better. You reported this bug a while ago and there hasn't been any activity in it recently. We were wondering is this still an issue for you? Can you try with latest Ubuntu release? Thanks in advance. -- Cannot mount SATA disk as a root https://bugs.launchpad.net/bugs/56441 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From themuso at themuso.com Tue Jan 8 07:39:42 2008 From: themuso at themuso.com (Luke Yelavich) Date: Tue, 08 Jan 2008 07:39:42 -0000 Subject: [Bug 181183] Please create -rt metapackages needed for alpha 3 of UbuntuStudio. References: <20080108073942.15627.53847.malonedeb@gangotri.ubuntu.com> Message-ID: <20080108073942.15627.53847.malonedeb@gangotri.ubuntu.com> Public bug reported: Please create -rt flavour metapackages needed for UbuntuStudio alpha 3. Thanks. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New ** Changed in: linux-meta (Ubuntu) Target: None => hardy-alpha-3 -- Please create -rt metapackages needed for alpha 3 of UbuntuStudio. https://bugs.launchpad.net/bugs/181183 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From bugwatch at bugs.launchpad.net Tue Jan 8 10:44:21 2008 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Tue, 08 Jan 2008 10:44:21 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080108104440.3662.17883.launchpad@forster.canonical.com> ** Changed in: linux Status: Confirmed => In Progress -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From bugwatch at bugs.launchpad.net Tue Jan 8 10:44:21 2008 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Tue, 08 Jan 2008 10:44:21 -0000 Subject: [Bug 119940] Re: /proc/cpuinfo reports incorrect information for Via C3 References: <20070611220540.16709.9955.malonedeb@gangotri.ubuntu.com> Message-ID: <20080108104454.3662.32185.launchpad@forster.canonical.com> ** Changed in: linux Status: Confirmed => In Progress -- /proc/cpuinfo reports incorrect information for Via C3 https://bugs.launchpad.net/bugs/119940 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From bugwatch at bugs.launchpad.net Tue Jan 8 10:44:21 2008 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Tue, 08 Jan 2008 10:44:21 -0000 Subject: [Bug 56233] Re: sis5513 dma errors References: <20060813125709.24639.27600.malonedeb@gangotri.ubuntu.com> Message-ID: <20080108104432.3662.11382.launchpad@forster.canonical.com> ** Changed in: linux Status: Confirmed => In Progress -- sis5513 dma errors https://bugs.launchpad.net/bugs/56233 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From bugwatch at bugs.launchpad.net Tue Jan 8 10:44:21 2008 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Tue, 08 Jan 2008 10:44:21 -0000 Subject: [Bug 54294] Re: Failed to allocate mem resource #6 ... References: <20060727223134.3952.48463.malonedeb@gangotri.ubuntu.com> Message-ID: <20080108104440.3662.4876.launchpad@forster.canonical.com> *** This bug is a duplicate of bug 159241 *** https://bugs.launchpad.net/bugs/159241 ** Changed in: linux Status: Confirmed => In Progress -- Failed to allocate mem resource #6 ... https://bugs.launchpad.net/bugs/54294 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From joerlend.schinstad at gmail.com Tue Jan 8 12:47:48 2008 From: joerlend.schinstad at gmail.com (Jo-Erlend Schinstad) Date: Tue, 08 Jan 2008 12:47:48 -0000 Subject: [Bug 157191] Re: please enable CONFIG_TASKSTATS, especially CONFIG_TASK_IO_ACCOUNTING References: <20071025192852.32502.72807.malonedeb@gangotri.ubuntu.com> Message-ID: <20080108124748.25144.40485.malone@gandwana.ubuntu.com> Yes, this is important. The question is if there is any reason for it not to be configured that way? Such functionality becomes even more important as virtualization becomes more common, I think. I/O is probably the biggest bottleneck there is atm, so you need to track down the source as quickly as possible. Having iotop available could greatly simplify this. -- please enable CONFIG_TASKSTATS, especially CONFIG_TASK_IO_ACCOUNTING https://bugs.launchpad.net/bugs/157191 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From nsheridan at gmail.com Tue Jan 8 13:24:56 2008 From: nsheridan at gmail.com (Niall Sheridan) Date: Tue, 08 Jan 2008 13:24:56 -0000 Subject: [Bug 181239] [hardy] regression: kernel requires pci=bfsort on dell poweredge 2950 References: <20080108132456.25248.47125.malonedeb@gandwana.ubuntu.com> Message-ID: <20080108132456.25248.47125.malonedeb@gandwana.ubuntu.com> Public bug reported: In gutsy, the installer kernel would correctly identify the network cards on a Dell PE 2950 in the correct order - i.e. eth0 would correspond to the first NIC as the BIOS saw it and eth1 would correspond to the second. In hardy alpha2 the kernel is identifying the onboard NICs in reverse order to the BIOS. The kernel will detect the NICs in the correct order if I append the option 'pci=bfsort' to the installer commandline. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- [hardy] regression: kernel requires pci=bfsort on dell poweredge 2950 https://bugs.launchpad.net/bugs/181239 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From joelol75 at verizon.net Tue Jan 8 14:32:42 2008 From: joelol75 at verizon.net (JoelOl75) Date: Tue, 08 Jan 2008 14:32:42 -0000 Subject: [Bug 181255] iwl3945 on Dell Inspiron e1705/9400 wireless light "out" References: <20080108143243.7349.16584.malonedeb@gangotri.ubuntu.com> Message-ID: <20080108143243.7349.16584.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-restricted-modules Switch from ipw3945 to iwl3945 in Hardy breaks wifi indicator light. Wifi works, but the light always stays off. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- iwl3945 on Dell Inspiron e1705/9400 wireless light "out" https://bugs.launchpad.net/bugs/181255 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From gianluca.tomasino at gmail.com Tue Jan 8 20:23:42 2008 From: gianluca.tomasino at gmail.com (Gianluca Tomasino) Date: Tue, 08 Jan 2008 20:23:42 -0000 Subject: [Bug 181341] ipw2200 unable to load firmware with linux-image-2.6.24-3 References: <20080108202342.16353.62332.malonedeb@potassium.ubuntu.com> Message-ID: <20080108202342.16353.62332.malonedeb@potassium.ubuntu.com> Public bug reported: Binary package hint: linux-image I have updated kernel to version 2.6.24-3 but ipw2200 module loading fails because it unable to load firmware. >dmesg output: [ 1146.466692] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 1146.519299] ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2 [ 1146.519308] ipw2200: Unable to load firmware: -2 [ 1146.519313] ipw2200: failed to register network device [ 1146.519656] ACPI: PCI interrupt for device 0000:02:06.0 disabled [ 1146.519675] ipw2200: probe of 0000:02:06.0 failed with error -5 There isn't ipw2200-bss.fw in /lib/firmware/2.6.24-3-generic/ ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- ipw2200 unable to load firmware with linux-image-2.6.24-3 https://bugs.launchpad.net/bugs/181341 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From jp at binford3000.de Tue Jan 8 21:38:20 2008 From: jp at binford3000.de (Janosch Peters) Date: Tue, 08 Jan 2008 21:38:20 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20080108213820.25248.73923.malone@gandwana.ubuntu.com> I have the "failed to set xfermode" issue, too. My workaround is to disable the controller in the BIOS. This is a realy bad workaround, because I cannot access my DVD-Drive. Vista has no problems with it so I think we can rule out hardware failours. It's very sad that this bug hasn't been fixed for about 1 1/2 years. Is there any progress Ben? cheers, Janosch -- JMicron PATA/SATA Controller does not work https://bugs.launchpad.net/bugs/57502 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From RichieS at GMail.com Tue Jan 8 21:49:29 2008 From: RichieS at GMail.com (Richie) Date: Tue, 08 Jan 2008 21:49:29 -0000 Subject: [Bug 181361] Logitech G25 does not fully work with Ubuntu References: <20080108214930.16245.45363.malonedeb@potassium.ubuntu.com> Message-ID: <20080108214930.16245.45363.malonedeb@potassium.ubuntu.com> Public bug reported: I own a Logitech G25 steering wheel. The steering wheel paritally works under gutsy and hardy (Throttle and brakes, steering.. but there are some big issues with it. a) It only supports 11 buttons.. the G25 has much more than 11 buttons. b) The clutch pedal does not work at all.. c) Only first and second gear (buttons 10 + 11) work. d) Force feedback isnt working, I have tried ff-utils from sourceforge.net lsusb -v Bus 001 Device 003: ID 046d:c294 Logitech, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 16 idVendor 0x046d Logitech, Inc. idProduct 0xc294 bcdDevice 12.22 iManufacturer 0 iProduct 2 G25 Racing Wheel iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 41 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 80mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 33 US bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 130 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- Logitech G25 does not fully work with Ubuntu https://bugs.launchpad.net/bugs/181361 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From leann at ubuntu.com Tue Jan 8 22:22:42 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Tue, 08 Jan 2008 22:22:42 -0000 Subject: [Bug 21344] Re: Hang when loading ipw2100 References: <20060113141220.21012.9495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080108222242.25248.57811.launchpad@gandwana.ubuntu.com> ** Changed in: linux (Ubuntu) Assignee: Ubuntu Kernel Network Team (ubuntu-kernel-network) => Ubuntu Kernel Team (ubuntu-kernel-team) -- Hang when loading ipw2100 https://bugs.launchpad.net/bugs/21344 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From kimbledon at hotmail.com Wed Jan 9 00:27:43 2008 From: kimbledon at hotmail.com (kimbledon) Date: Wed, 09 Jan 2008 00:27:43 -0000 Subject: [Bug 88530] Re: USB ports: connect-debounce failed, port disabled References: <20070227225858.22094.98179.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109002743.25144.60225.malone@gandwana.ubuntu.com> Found it from fujitsu-siemens support page. -- USB ports: connect-debounce failed, port disabled https://bugs.launchpad.net/bugs/88530 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From tim.gardner at canonical.com Wed Jan 9 00:30:12 2008 From: tim.gardner at canonical.com (Tim Gardner) Date: Wed, 09 Jan 2008 00:30:12 -0000 Subject: [Bug 181183] Re: Please create -rt metapackages needed for alpha 3 of UbuntuStudio. References: <20080108073942.15627.53847.malonedeb@gangotri.ubuntu.com> Message-ID: <20080109003012.30100.25861.malone@gandwana.ubuntu.com> Missed the window for Alpha 3. Will get it for Alpha 4. ** Changed in: linux-meta (Ubuntu) Importance: Undecided => Medium Target: hardy-alpha-3 => hardy-alpha-4 ** Changed in: linux-meta (Ubuntu) Status: New => In Progress ** Changed in: linux-meta (Ubuntu) Assignee: (unassigned) => Tim Gardner (timg-tpi) -- Please create -rt metapackages needed for alpha 3 of UbuntuStudio. https://bugs.launchpad.net/bugs/181183 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From tad1073 at bellsouth.net Wed Jan 9 06:29:39 2008 From: tad1073 at bellsouth.net (tad1073) Date: Wed, 09 Jan 2008 06:29:39 -0000 Subject: [Bug 110585] Re: Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx References: <20070427154808.15141.14118.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109062939.16819.6147.malone@gandwana.ubuntu.com> Spec: Compaq Proliant ML330 Pentium III 733mhz 256k cache 256mb ram Compaq Smart Array 431 Controller set to RAID0 w/25.9gb=3/9.1gb hd's System Embedded IDE Controller SCSI Controller I have been trying to get Ubuntu 7.10 on that machine for a week now. I keep getting the same errors and I am not computer savy by no means and am a noob to Linux. >From the Ubuntu boot screen I selected "Check CD for Defects" and got the errors listed below: [364.283722] ata1.01: Exception Emask 0x0 Sact 0x0 Serr 0x0 action 0x2 Frozen [364.283771] ata1.01 (BMDMA stat 0x44) [364.283822] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag0 cdb 0x28 d ata 129024 in [374.885258]305]349]394]438]482]524]567]610]653] Buffer I/O error on device sr0, logical block 329966-329975 The error messege has 10 line to it, I shortened it to one line so I wouldn't have to type the whole thing out: 305]349]= [374.885305][374.885349] etc. etc. I select "Star or Install Ubuntu" from the boot screen it runs through the process of the checks and there are some [FAIL] messeges on some of the checks, then it tells me to "hit enter for maintnace or ctrl+D to continue" When I hit enter I am taken to root at ubuntu and I don't know how to fix the errors. If I ctrl+D it puts out a bunch of errors and won't load the OS. Any help will be greatly appreciated. -- Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx https://bugs.launchpad.net/bugs/110585 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From eudoxos at arcig.cz Wed Jan 9 07:22:33 2008 From: eudoxos at arcig.cz (=?utf-8?b?VsOhY2xhdiDFoG1pbGF1ZXI=?=) Date: Wed, 09 Jan 2008 07:22:33 -0000 Subject: [Bug 181255] Re: iwl3945 on Dell Inspiron e1705/9400 wireless light "out" References: <20080108143243.7349.16584.malonedeb@gangotri.ubuntu.com> Message-ID: <20080109072233.16583.99071.malone@gandwana.ubuntu.com> Confirming the same change with ThinkPad X61s, intel 3945, when switching from ipw3945 (gutsy) to iwl3945 (hardy) ** Changed in: linux-meta (Ubuntu) Status: New => Confirmed ** Summary changed: - iwl3945 on Dell Inspiron e1705/9400 wireless light "out" + [hardy] iwl3945 wireless LED is never on -- [hardy] iwl3945 wireless LED is never on https://bugs.launchpad.net/bugs/181255 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From phil_esc at club-internet.fr Wed Jan 9 09:38:27 2008 From: phil_esc at club-internet.fr (=?utf-8?q?Philippe_Escarbassi=C3=A8re?=) Date: Wed, 09 Jan 2008 09:38:27 -0000 Subject: [Bug 45295] Re: PCMCIA does not bring up eth1 during boot References: <20060517191118.15142.67878.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109093827.16583.76402.malone@gandwana.ubuntu.com> The problem seems fixed with the 8 jan daily build (fresh install) LAN works at startup automatically and it does even work if card is plugged after boot -- PCMCIA does not bring up eth1 during boot https://bugs.launchpad.net/bugs/45295 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From bugwatch at bugs.launchpad.net Wed Jan 9 10:36:52 2008 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 09 Jan 2008 10:36:52 -0000 Subject: [Bug 56233] Re: sis5513 dma errors References: <20060813125709.24639.27600.malonedeb@gangotri.ubuntu.com> Message-ID: <20080109103704.25998.55124.launchpad@forster.canonical.com> ** Changed in: linux Status: In Progress => Incomplete -- sis5513 dma errors https://bugs.launchpad.net/bugs/56233 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From admin at dark-tower.net Wed Jan 9 12:16:17 2008 From: admin at dark-tower.net (danub) Date: Wed, 09 Jan 2008 12:16:17 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109121617.7349.39458.malone@gangotri.ubuntu.com> I gave up on trying to get ubuntu on my box natively. I just ended up installing a VMWare environment and loading Ubuntu to that. Redhat seems to find the controller just fine though....oh well -- JMicron PATA/SATA Controller does not work https://bugs.launchpad.net/bugs/57502 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From dan at linder.org Wed Jan 9 14:02:27 2008 From: dan at linder.org (dan_linder) Date: Wed, 09 Jan 2008 14:02:27 -0000 Subject: [Bug 110585] Re: Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx References: <20070427154808.15141.14118.malonedeb@gandwana.ubuntu.com> <20080109062939.16819.6147.malone@gandwana.ubuntu.com> Message-ID: <3e2be50801090602j31ed1945sd581a05e34f0c597@mail.gmail.com> On Jan 9, 2008 12:29 AM, tad1073 wrote: > > >From the Ubuntu boot screen I selected "Check CD for Defects" and got > the errors listed below: > > [364.283722] ata1.01: Exception Emask 0x0 Sact 0x0 Serr 0x0 action 0x2 > Frozen > [364.283771] ata1.01 (BMDMA stat 0x44) > [364.283822] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag0 cdb > 0x28 d > ata 129024 in > [374.885258]305]349]394]438]482]524]567]610]653] Buffer I/O error on > device sr0, logical block 329966-329975 > > The error messege has 10 line to it, I shortened it to one line so I > wouldn't have to type the whole thing out: > 305]349]= [374.885305][374.885349] etc. etc. > There are two common possibilities for this error: 1: The .ISO file was corrupted during download. Check the md5sum of the .ISO file -- on another Linux system run "md5sum XXX.iso" and compare the output to the md5sum reported on the page you downloaded it from. 2: The actual CD has a scratch or other imperfection (possibly invisible to the naked eye). If the MD5sum is correct (#1 above), then re-burn the CD. If the second fails, try re-burning the image at a slower speed and/or on a different computer. Another possiblity is that the CD drive in your server isn't reading the CD properly. If you boot the CD on another system and run the check CD, does it pass there? > > I select "Star or Install Ubuntu" from the boot screen it runs through > the process of the checks and there are some [FAIL] messeges on some of > the checks, then it tells me to "hit enter for maintnace or ctrl+D to > continue" When I hit enter I am taken to root at ubuntu and I don't know > how to fix the errors. If I ctrl+D it puts out a bunch of errors and > won't load the OS. Any help will be greatly appreciated. > > Yup, if there is an error with the CD, then *any* error is possible. Dan -- "Quis custodiet ipsos custodes?" (Who can watch the watchmen?) -- from the Satires of Juvenal "I do not fear computers, I fear the lack of them." -- Isaac Asimov (Author) ** *** ***** ******* *********** ************* -- Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx https://bugs.launchpad.net/bugs/110585 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From jouni.mettala at helsinki.fi Wed Jan 9 14:05:58 2008 From: jouni.mettala at helsinki.fi (Jouni Mettala) Date: Wed, 09 Jan 2008 14:05:58 -0000 Subject: [Bug 48107] Re: Wrong firmware picked for us robotics 5416 wlan cards References: <20060602193128.2141.77981.malonedeb@gangotri.ubuntu.com> Message-ID: <20080109140558.16583.61338.malone@gandwana.ubuntu.com> This is still problem using Hardy. Texas Instruments ACX 111 chipset, it's a PCI card not a USB dongle here also. We got it working using kernel 2.6.22-14 in Hardy and used firmware version 1.2.0.30. sudo modprobe -r acx sudo modprobe acx firmware_ver=1.2.0.30 restart networking: sudo /etc/init.d/networking restart -- Wrong firmware picked for us robotics 5416 wlan cards https://bugs.launchpad.net/bugs/48107 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From pukyxd at gmail.com Wed Jan 9 14:12:24 2008 From: pukyxd at gmail.com (pukyxd) Date: Wed, 09 Jan 2008 14:12:24 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109141224.7349.39379.malone@gangotri.ubuntu.com> In Ubuntu Gutsy Final and in Hardy updated I has the same problem. My laptop is Upi ( Intel core duo 2.00, Intel 945GM grafic card, RTL-8139/8139C/8139C+ network card) ** Attachment added: "log files" http://launchpadlibrarian.net/11230958/log-files.tar.gz -- Power down after shutdown does not work... https://bugs.launchpad.net/bugs/43961 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From mshanker at kent.edu Wed Jan 9 14:54:17 2008 From: mshanker at kent.edu (Murali) Date: Wed, 09 Jan 2008 14:54:17 -0000 Subject: [Bug 33372] Re: Cannot wake up from suspend and hibernate References: <20060302085058.17498.86100.malonedeb@gangotri.ubuntu.com> Message-ID: <20080109145417.25559.47469.malone@potassium.ubuntu.com> After more testing, it appears that the nvidia driver is creating the problem. Using the NV driver, suspend and hibernate works fine with the current kernel (2.6.22-14). -- Cannot wake up from suspend and hibernate https://bugs.launchpad.net/bugs/33372 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From car_crazy33 at hotmail.com Wed Jan 9 15:19:39 2008 From: car_crazy33 at hotmail.com (Kreuger Burns) Date: Wed, 09 Jan 2008 15:19:39 -0000 Subject: [Bug 181522] ndiswrapper - wireless card randomly stopped working References: <20080109151939.16583.50936.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109151939.16583.50936.malonedeb@gandwana.ubuntu.com> Public bug reported: About a week ago my wireless card which is PCMCIA stopped working. The lights on it don't come on any more and I can't seem to get it detected by Ubuntu (feisty) at all. I can still get a wired connection so I'm not sure what's wrong. I thought maybe because I've had trouble sticking the card into the slot lately that I bent a pin or something but seeing as it was in for a few days without being removed at all, I can't see how that could've ruined it. It was working one day and the next it stopped. It really doesn't make sense to me at all. I didn't change anything at all on the computer. The only thing I had done is used msn and copied a few music files from it to my desktop. A couple days later, I checked the pins and everything and they seemed fine. I tried reinstalling the drivers using the latest version of ndiswrapper and to no avail. I have checked all the main things like dmesg, lspci, lshw -C network. It shows ndiswrapper as being loaded when I do lsmod. The card is Belkin F5D7010 Ver.7000 Wireless G using the net8185.inf Windows drivers (Realtek) as per this tutorial http://ubuntuforums.org/showpost.php?p=2402378&postcount=16 not sure what else to do. ** Affects: ndiswrapper (Ubuntu) Importance: Undecided Status: New -- ndiswrapper - wireless card randomly stopped working https://bugs.launchpad.net/bugs/181522 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From car_crazy33 at hotmail.com Wed Jan 9 15:32:55 2008 From: car_crazy33 at hotmail.com (Kreuger Burns) Date: Wed, 09 Jan 2008 15:32:55 -0000 Subject: [Bug 181522] Re: ndiswrapper - wireless card randomly stopped working References: <20080109151939.16583.50936.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109153255.25366.25190.malone@potassium.ubuntu.com> here is the lspci output ** Attachment added: "lspci.txt" http://launchpadlibrarian.net/11231367/lspci.txt -- ndiswrapper - wireless card randomly stopped working https://bugs.launchpad.net/bugs/181522 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From car_crazy33 at hotmail.com Wed Jan 9 15:32:15 2008 From: car_crazy33 at hotmail.com (Kreuger Burns) Date: Wed, 09 Jan 2008 15:32:15 -0000 Subject: [Bug 181522] Re: ndiswrapper - wireless card randomly stopped working References: <20080109151939.16583.50936.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109153215.16583.10975.malone@gandwana.ubuntu.com> here is the lsmod output ** Attachment added: "lsmod.txt" http://launchpadlibrarian.net/11231362/lsmod.txt -- ndiswrapper - wireless card randomly stopped working https://bugs.launchpad.net/bugs/181522 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From car_crazy33 at hotmail.com Wed Jan 9 15:31:30 2008 From: car_crazy33 at hotmail.com (Kreuger Burns) Date: Wed, 09 Jan 2008 15:31:30 -0000 Subject: [Bug 181522] Re: ndiswrapper - wireless card randomly stopped working References: <20080109151939.16583.50936.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109153130.25366.64234.malone@potassium.ubuntu.com> here is the lshw -C network output ** Attachment added: "lshw -C network.txt" http://launchpadlibrarian.net/11231357/lshw%20-C%20network.txt -- ndiswrapper - wireless card randomly stopped working https://bugs.launchpad.net/bugs/181522 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From car_crazy33 at hotmail.com Wed Jan 9 15:30:38 2008 From: car_crazy33 at hotmail.com (Kreuger Burns) Date: Wed, 09 Jan 2008 15:30:38 -0000 Subject: [Bug 181522] Re: ndiswrapper - wireless card randomly stopped working References: <20080109151939.16583.50936.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109153038.16819.22137.malone@gandwana.ubuntu.com> Here is the dmesg ** Attachment added: "dmesg.log" http://launchpadlibrarian.net/11231356/dmesg.log -- ndiswrapper - wireless card randomly stopped working https://bugs.launchpad.net/bugs/181522 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From tad1073 at bellsouth.net Wed Jan 9 15:45:43 2008 From: tad1073 at bellsouth.net (tad1073) Date: Wed, 09 Jan 2008 15:45:43 -0000 Subject: [Bug 110585] Re: Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx References: <20070427154808.15141.14118.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109154544.16583.6467.malone@gandwana.ubuntu.com> I forgot to mention that the CD was ordered from Ubuntu, I ordered two more which are the text based installers. I will check it on another machine. If there are no errors can you help me installing it on the machine mentioned. I am not necessarily going to use that machine as a server, for now anyways. -- Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx https://bugs.launchpad.net/bugs/110585 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From jouni.mettala at helsinki.fi Wed Jan 9 15:48:57 2008 From: jouni.mettala at helsinki.fi (Jouni Mettala) Date: Wed, 09 Jan 2008 15:48:57 -0000 Subject: [Bug 102682] Re: a Fix for running Ubuntu Server edition 6.10 over wireless References: <20070404013858.844.21615.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109154857.7546.68499.malone@gangotri.ubuntu.com> Thanks for your bug report. /lib/firmware/acx/ directory and some (maybe all) files in that directory belongs to linux-restricted-modules package. Does server edition install it by default? This bug is for pakage linux-source-2.6.15 which is not used in 6.10 Edgy Eft. -- a Fix for running Ubuntu Server edition 6.10 over wireless https://bugs.launchpad.net/bugs/102682 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From c.graz at tin.it Wed Jan 9 16:43:54 2008 From: c.graz at tin.it (graz848) Date: Wed, 09 Jan 2008 16:43:54 -0000 Subject: [Bug 39414] Re: syslog is flooded with messages after connecting bluetooth usb dongle References: <20060413092856.13165.25179.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109164354.25366.10629.malone@potassium.ubuntu.com> Same here. Gutsy 7.10, kernel 2.6.22-14-generic, dongle recognized as 0e5e:6622 (it is a phonix PHB410), and the syslog continues giving messages such as [19325.944260] hci_scodata_packet: hci0 SCO packet for unknown connection handle 92 [19325.944265] hci_scodata_packet: hci0 SCO packet for unknown connection handle 92 [19325.944268] hci_scodata_packet: hci0 SCO packet for unknown connection handle 92 [19325.944271] hci_scodata_packet: hci0 SCO packet for unknown connection handle 92 [19325.954246] hci_scodata_packet: hci0 SCO packet for unknown connection handle 92 [19325.954251] hci_scodata_packet: hci0 SCO packet for unknown connection handle 92 [19325.954254] hci_scodata_packet: hci0 SCO packet for unknown connection handle 92 and so on and so on... until the usb dongle is unplugged. Gnome doesn't show either the Bluetooth applet when the dongle is plugged in, like it does instead on my laptop. The bluetooth sending/receiving files and other services work as well anyway. Hope in a fix soon. Bye -- syslog is flooded with messages after connecting bluetooth usb dongle https://bugs.launchpad.net/bugs/39414 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From tad1073 at bellsouth.net Wed Jan 9 17:31:39 2008 From: tad1073 at bellsouth.net (tad1073) Date: Wed, 09 Jan 2008 17:31:39 -0000 Subject: [Bug 110585] Re: Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx References: <20070427154808.15141.14118.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109173139.7349.63759.malone@gangotri.ubuntu.com> I checked the CD and there are no defects on it or with it. i kind of figured it was a compatibility issue, so now what do I do? -- Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx https://bugs.launchpad.net/bugs/110585 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From tad1073 at bellsouth.net Wed Jan 9 17:31:46 2008 From: tad1073 at bellsouth.net (tad1073) Date: Wed, 09 Jan 2008 17:31:46 -0000 Subject: [Bug 110585] Re: Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx References: <20070427154808.15141.14118.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109173146.25559.44602.malone@potassium.ubuntu.com> I checked the CD and there are no defects on it or with it. i kind of figured it was a compatibility issue, so now what do I do? -- Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx https://bugs.launchpad.net/bugs/110585 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From launchpad.net at paultaylor.eu Wed Jan 9 17:56:38 2008 From: launchpad.net at paultaylor.eu (Paul Taylor) Date: Wed, 09 Jan 2008 17:56:38 -0000 Subject: [Bug 40561] USB disk goes offline - but not in Knoppix 5.1.1 (Linux 2.6.19) References: <20060421135712.30538.73448.malonedeb@gangotri.ubuntu.com> Message-ID: <20080109175638.7349.5611.malone@gangotri.ubuntu.com> I used gparted to repartition my 80Gb disk with several ext3 partitions (and one for the Mac), and gparted, fdisk, cfdisk and the Mac agreed on the new partition table. Using cpio under Ubuntu Dapper / Linux 2.6.15, I then tried to copy the largest partition of my old disk (10Gb) on to it. This failed in the same way as before, but now after 3Gb. However, since I was now using the ext3 "journaling" filesystem, fsck now said that the disk was clean. But whereas it had originally been mounted as /dev/sda, it was remounted after the failure as /dev/sdb. Then I tried out Knoppix version 5.1.1 (www.knoppix.net), which is a year old; it includes the Linux kernel version 2.6.19. This successfully copied all of my smaller partitions. Since I had already spent time on the partial copy of the big partition, I didn't scrub it and start again, but copied the rest in bits by listing the missing files. Maybe I wasn't doing a big enough transfer to provoke it, but the previous failure DID NOT happen. So maybe this bug was fixed in Linux 2.6.19. However, it would be nice to hear from Chuck Short or anyone else with inside knowledge of the relevant code and its potential failure whether my report and the others pertain to something that is identifiable. -- Problem with USB Mass Storage https://bugs.launchpad.net/bugs/40561 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From samh1974 at gmail.com Wed Jan 9 18:22:18 2008 From: samh1974 at gmail.com (CaptSaltyJack) Date: Wed, 09 Jan 2008 18:22:18 -0000 Subject: [Bug 110585] Re: Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx References: <20070427154808.15141.14118.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109182218.7546.30004.malone@gangotri.ubuntu.com> tad: Not sure if your issue has anything to do with the cpqarray/sym53c8xx module issue. Maybe you ought to file a separate bug report? I don't mean to dismiss your problem, just trying to keep this particular bug discussion on topic. -- Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx https://bugs.launchpad.net/bugs/110585 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From mtretin at uvm.edu Wed Jan 9 19:06:01 2008 From: mtretin at uvm.edu (Matt Tretin) Date: Wed, 09 Jan 2008 19:06:01 -0000 Subject: [Bug 181584] acpi causes cdrom to not register References: <20080109190601.7349.9769.malonedeb@gangotri.ubuntu.com> Message-ID: <20080109190601.7349.9769.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-source Lenovo N200 3000 (0687) Intel ICH8M Chipset Bios reports: IDE DVD-ROM, SATA HDD w/ AHCI controller Running default kernel shipped in 7.10 there is no recognition of the ATAPI cdrom. Running default kernel .config recompiled w/o ACPI there is cdrom recognition. Running vanilla kernel w/o ACPI there is is recognition. Will try default kernel w/ acpi=off option. libata.enable_atapi=1 has no effect. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- acpi causes cdrom to not register https://bugs.launchpad.net/bugs/181584 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From leann at ubuntu.com Wed Jan 9 20:13:18 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Wed, 09 Jan 2008 20:13:18 -0000 Subject: [Bug 148116] Re: When I hibernate my laptop, the ethernet interface vanishes References: <20071002141637.23615.14279.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109201319.16819.62771.malone@gandwana.ubuntu.com> A new task against the actively developed kernel is open so we're closing the task against linux-source-2.6.22. Thanks! ** Changed in: linux-source-2.6.22 (Ubuntu) Status: New => Won't Fix -- When I hibernate my laptop, the ethernet interface vanishes https://bugs.launchpad.net/bugs/148116 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From rolla.n.selbak at intel.com Wed Jan 9 20:11:12 2008 From: rolla.n.selbak at intel.com (Rolla Selbak) Date: Wed, 09 Jan 2008 20:11:12 -0000 Subject: [Bug 40763] Re: CCMP decrypt failed errors with ipw2200 References: <20060422134633.30538.35482.malonedeb@gangotri.ubuntu.com> Message-ID: <20080109201113.16819.74179.malone@gandwana.ubuntu.com> Casper: 2 qs 1- Do you see any bug in the wireless performance when these msg appear? (i.e. get disconnected, lag in connection, etc.) or are these msg just annoying noise in the logs? 2- Can you retest with a 2.6.24 kernel and see if the problem still occurs? (see Leann's comments on 1/5 on how to test with Hardy Alpha 2, or you can wait for Alpha 3 which should be out this week) In the meantime, I'll ask the wireless team what the root of these messages is. Thanks. -- CCMP decrypt failed errors with ipw2200 https://bugs.launchpad.net/bugs/40763 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From rolla.n.selbak at intel.com Wed Jan 9 20:16:52 2008 From: rolla.n.selbak at intel.com (Rolla Selbak) Date: Wed, 09 Jan 2008 20:16:52 -0000 Subject: [Bug 9887] Re: Setterm with ACPI and APM doesn't blank laptop screen correctly. References: <20060113131219.21012.34649.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080109201652.25366.70233.malone@potassium.ubuntu.com> Hornett83: Thank you for taking the time to report this bug and helping to make Ubuntu better. The Hardy Heron Alpha series was recently released. Alpha2 and subsequent releases contain an updated version of the kernel. You can download and try the new Hardy Heron Alpha release from http://cdimage.ubuntu.com/releases/hardy/ . Please note that Alpha3 will be released within the next day or two so you many want to wait. You should be able to then test this bug with the new kernel on the LiveCD. If you can, please verify if this bug still exists or not and report back your results. General information regarding the release can also be found here: http://www.ubuntu.com/testing/ . Thanks! Also, if the bug does still exist, can you please provide the following? It would really help with debugging. uname -a > uname-a.log cat /proc/version_signature > version.log dmesg > dmesg.log sudo lspci -vvnn > lspci-vvnn.log Thanks. ** Also affects: linux Importance: Undecided Status: New ** Changed in: linux Status: New => Incomplete -- Setterm with ACPI and APM doesn't blank laptop screen correctly. https://bugs.launchpad.net/bugs/9887 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From rolla.n.selbak at intel.com Wed Jan 9 20:21:01 2008 From: rolla.n.selbak at intel.com (Rolla Selbak) Date: Wed, 09 Jan 2008 20:21:01 -0000 Subject: [Bug 9887] Re: Setterm with ACPI and APM doesn't blank laptop screen correctly. References: <20060113131219.21012.34649.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080109202101.25559.13582.malone@potassium.ubuntu.com> I've opened a new task against the actively developed kernel and am closing the report against linux-source-2.6.22. Thanks! ** Changed in: linux-source-2.6.22 (Ubuntu) Status: New => Invalid -- Setterm with ACPI and APM doesn't blank laptop screen correctly. https://bugs.launchpad.net/bugs/9887 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From brian at ubuntu.com Wed Jan 9 22:01:30 2008 From: brian at ubuntu.com (Brian Murray) Date: Wed, 09 Jan 2008 22:01:30 -0000 Subject: [Bug 42160] Re: Shut Down won't power off References: <20060430010556.16712.32800.malonedeb@gandwana.ubuntu.com> Message-ID: <20080109220130.7546.61401.malone@gangotri.ubuntu.com> The symptom of this particular bug, failure to power off when shutting down, is specific to the hardware and BIOS used. So while many of you may have the same symptom they really should be different bugs. It would be helpful if everyone were to test with a Hardy Alpha build, http://www.ubuntu.com/testing/ , and open a separate bug report for their hardware using "linux" as the package. The bug report should contain the information requested at http://wiki.ubuntu.com/KernelTeamBugPolicies and the output of 'sudo dmidecode'. Additionally, it would be great if you made the titles of a new bug report contain information about either your motherboard or system. I apologize for any inconvenience this might cause but appreciate your cooperation and your helping to make Ubuntu better. ** Changed in: linux-source-2.6.22 (Ubuntu) Assignee: (unassigned) => Brian Murray (brian-murray) Status: New => Incomplete ** Summary changed: - Shut Down won't power off + Shut Down won't power off with an ASUS P5GD1 motherboard -- Shut Down won't power off with an ASUS P5GD1 motherboard https://bugs.launchpad.net/bugs/42160 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From angelfire at fastwebnet.it Wed Jan 9 23:49:17 2008 From: angelfire at fastwebnet.it (AngelFire) Date: Wed, 09 Jan 2008 23:49:17 -0000 Subject: [Bug 33372] Re: Cannot wake up from suspend and hibernate References: <20060302085058.17498.86100.malonedeb@gangotri.ubuntu.com> <20080109145417.25559.47469.malone@potassium.ubuntu.com> Message-ID: <000901c8531a$3f8c17e0$59a38101@CARMELACER> But I have ATI Mobility Radeon 7500. Regards ----- Original Message ----- From: "Murali" To: Sent: Wednesday, January 09, 2008 3:54 PM Subject: [Bug 33372] Re: Cannot wake up from suspend and hibernate After more testing, it appears that the nvidia driver is creating the problem. Using the NV driver, suspend and hibernate works fine with the current kernel (2.6.22-14). -- Cannot wake up from suspend and hibernate https://bugs.launchpad.net/bugs/33372 You received this bug notification because you are a direct subscriber of the bug. -- Cannot wake up from suspend and hibernate https://bugs.launchpad.net/bugs/33372 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From dan at linder.org Thu Jan 10 00:40:59 2008 From: dan at linder.org (dan_linder) Date: Thu, 10 Jan 2008 00:40:59 -0000 Subject: [Bug 110585] Re: Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx References: <20070427154808.15141.14118.malonedeb@gandwana.ubuntu.com> <20080109182218.7546.30004.malone@gangotri.ubuntu.com> Message-ID: <3e2be50801091640h531ec7e6l309417be6126a71e@mail.gmail.com> Capt. Salty: I agree. Tad: If the CD passes the check on a different system, then I would suspect the CD-ROM drive on your system. The original problem this thread was about was specifically the hard-drive controller being recognized correctly *after* installation. >From what you've told us, I'd say your CD-ROM drive might have issues. Dan -- "Quis custodiet ipsos custodes?" (Who can watch the watchmen?) -- from the Satires of Juvenal "I do not fear computers, I fear the lack of them." -- Isaac Asimov (Author) ** *** ***** ******* *********** ************* -- Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx https://bugs.launchpad.net/bugs/110585 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From tad1073 at bellsouth.net Thu Jan 10 03:43:54 2008 From: tad1073 at bellsouth.net (tad1073) Date: Thu, 10 Jan 2008 03:43:54 -0000 Subject: [Bug 110585] Re: Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx References: <20070427154808.15141.14118.malonedeb@gandwana.ubuntu.com> Message-ID: <20080110034355.25559.58335.malone@potassium.ubuntu.com> i guess I will file a seperate bug report for the issue I am having. In the mean time I will try to swap the cd-rom drive out and check it again. -- Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx https://bugs.launchpad.net/bugs/110585 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From tad1073 at bellsouth.net Thu Jan 10 03:51:48 2008 From: tad1073 at bellsouth.net (tad1073) Date: Thu, 10 Jan 2008 03:51:48 -0000 Subject: [Bug 110585] Re: Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx References: <20070427154808.15141.14118.malonedeb@gandwana.ubuntu.com> Message-ID: <20080110035148.25559.5732.malone@potassium.ubuntu.com> Thanks for the help. Bug filed #181678 -- Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx https://bugs.launchpad.net/bugs/110585 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From omertamuz at gmail.com Thu Jan 10 10:58:10 2008 From: omertamuz at gmail.com (Omer T) Date: Thu, 10 Jan 2008 10:58:10 -0000 Subject: [Bug 158695] Re: Intel PRO/Wireless 3945ABG card looses wirless extensions References: <20071030141747.2699.51027.malonedeb@potassium.ubuntu.com> Message-ID: <20080110105810.16819.11293.malone@gandwana.ubuntu.com> I see the exact same problem on a Lenovo 3000 N200 with the same card -- Intel PRO/Wireless 3945ABG card looses wirless extensions https://bugs.launchpad.net/bugs/158695 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From martin.pitt at ubuntu.com Thu Jan 10 10:59:11 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Thu, 10 Jan 2008 10:59:11 -0000 Subject: [Bug 125816] Re: linux-image postinst matches header_postinst_hook for postinst_hook incorrectly References: <20070713162019.31676.87785.malonedeb@gangotri.ubuntu.com> Message-ID: <20080110105912.11167.94689.malone@gandwana.ubuntu.com> This still has a pending kernel-package in feisty-proposed. Can someone please test this and confirm that it fixes the issue and still works otherwise? Or tell me to just remove it from -proposed because it is obsolete? Thank you! ** Changed in: kernel-package (Ubuntu Feisty) Status: New => Fix Committed ** Changed in: linux-source-2.6.20 (Ubuntu Feisty) Status: New => Invalid ** Changed in: linux-source-2.6.22 (Ubuntu Feisty) Status: New => Invalid -- linux-image postinst matches header_postinst_hook for postinst_hook incorrectly https://bugs.launchpad.net/bugs/125816 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for kernel-package in ubuntu. From denis at carolo.net Thu Jan 10 15:05:12 2008 From: denis at carolo.net (=?utf-8?q?Denis_Fr=C3=A8re?=) Date: Thu, 10 Jan 2008 15:05:12 -0000 Subject: [Bug 23513] Re: [r128] screen only updates every several minutes References: <20060113142406.21012.10559.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080110150512.25366.67464.malone@potassium.ubuntu.com> I don't think the problem comes from the kernel or from X config. I'm also experiencing the same behaviour under gutsy (kernel 2.6.22-14-generic). When I open another tty and start X with startx -- :1 everything is alright. It only happens when using gdm. -- [r128] screen only updates every several minutes https://bugs.launchpad.net/bugs/23513 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From ben.collins at ubuntu.com Thu Jan 10 15:49:21 2008 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 10 Jan 2008 15:49:21 -0000 Subject: [Bug 177301] Re: 6.06.2 installation in vmware resulted in kernel-oops in ext3_add_entry References: <20071218232723.2311.62576.malonedeb@gangotri.ubuntu.com> Message-ID: <20080110154921.31394.90969.malone@gangotri.ubuntu.com> I've been unable to reproduce this as well. I've uploaded a new linux- backports-modules-2.6.15 which fixes a bug there. Perhaps it is the root cause of this problem. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: New => Incomplete -- 6.06.2 installation in vmware resulted in kernel-oops in ext3_add_entry https://bugs.launchpad.net/bugs/177301 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From jp at binford3000.de Thu Jan 10 18:07:27 2008 From: jp at binford3000.de (Janosch Peters) Date: Thu, 10 Jan 2008 18:07:27 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20080110180727.25366.68448.malone@potassium.ubuntu.com> Ok I fixed this for me following a hint from the last post on http://ubuntuforums.org/showthread.php?t=637721. According to the guy in the forum the SATA Contollers are double booked (whatever that means) which apparently confuses ubuntu. The solution for me was to plug my harddisk in a high numbered sata port, in my case port 6 worked like a charm. Hope this helps. -- JMicron PATA/SATA Controller does not work https://bugs.launchpad.net/bugs/57502 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From martin.pitt at ubuntu.com Thu Jan 10 19:12:25 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Thu, 10 Jan 2008 19:12:25 -0000 Subject: [Bug 22220] Re: Correct modules for I2O-based raid are not loaded References: <20060113141705.21012.45566.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080110191225.31394.10952.malone@gangotri.ubuntu.com> Copied to dapper-updates, since we need to have it there for netinstall testing. ** Changed in: hw-detect (Ubuntu Dapper) Status: Fix Committed => Fix Released -- Correct modules for I2O-based raid are not loaded https://bugs.launchpad.net/bugs/22220 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From brian at ubuntu.com Thu Jan 10 20:28:22 2008 From: brian at ubuntu.com (Brian Murray) Date: Thu, 10 Jan 2008 20:28:22 -0000 Subject: [Bug 22220] Re: Correct modules for I2O-based raid are not loaded References: <20060113141705.21012.45566.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080110202823.8267.86228.launchpad@potassium.ubuntu.com> ** Tags added: hw-specific -- Correct modules for I2O-based raid are not loaded https://bugs.launchpad.net/bugs/22220 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From brian at ubuntu.com Thu Jan 10 20:34:46 2008 From: brian at ubuntu.com (Brian Murray) Date: Thu, 10 Jan 2008 20:34:46 -0000 Subject: [Bug 177301] Re: 6.06.2 installation in vmware resulted in kernel-oops in ext3_add_entry References: <20071218232723.2311.62576.malonedeb@gangotri.ubuntu.com> Message-ID: <20080110203446.14423.44611.malone@gangotri.ubuntu.com> I installed 2 times on my desktop using the i386 daily build 20080110.1 in VMware workstation without any issues. -- 6.06.2 installation in vmware resulted in kernel-oops in ext3_add_entry https://bugs.launchpad.net/bugs/177301 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From tim.gardner at canonical.com Thu Jan 10 21:17:02 2008 From: tim.gardner at canonical.com (Tim Gardner) Date: Thu, 10 Jan 2008 21:17:02 -0000 Subject: [Bug 181183] Re: Please create -rt metapackages needed for alpha 3 of UbuntuStudio. References: <20080108073942.15627.53847.malonedeb@gangotri.ubuntu.com> Message-ID: <20080110211702.26051.71718.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta (Ubuntu) Status: In Progress => Fix Committed -- Please create -rt metapackages needed for alpha 3 of UbuntuStudio. https://bugs.launchpad.net/bugs/181183 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From martin.pitt at ubuntu.com Thu Jan 10 21:32:59 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Thu, 10 Jan 2008 21:32:59 -0000 Subject: [Bug 177301] Re: 6.06.2 installation in vmware resulted in kernel-oops in ext3_add_entry References: <20071218232723.2311.62576.malonedeb@gangotri.ubuntu.com> Message-ID: <20080110213259.8478.79116.malone@potassium.ubuntu.com> Thanks. Let's blame this to the bug that was fixed today in linux- backports-modules. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Incomplete => Fix Released Target: dapper-updates => None -- 6.06.2 installation in vmware resulted in kernel-oops in ext3_add_entry https://bugs.launchpad.net/bugs/177301 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From admin at dark-tower.net Thu Jan 10 22:40:31 2008 From: admin at dark-tower.net (danub) Date: Thu, 10 Jan 2008 22:40:31 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20080110224031.25836.98059.malone@gandwana.ubuntu.com> What he means by the double booked is that the sata controllers are also on the jmicron controller (so they are on both controllers making them double booked). And while moving your hard drive to a higher numbered sata port gets it off the jmicron controller, this is only a mediocre workaround. Most people don't have a sata cd/dvd rom yet (still PATA) which automatically puts the drive on the jmicron controller (which in the case of my mobo and others, makes that drive "double booked" again, since it is on the ata controller and the jmicron controller). What needs to happen is that Ubuntu dev's need to get a fix for it. What happens to the people like me that have 8 drives in their box? I automatically lose the option of using 4 of my drives since 2 would be on the ATA/jmicron controller and my first 2 sata ports are on the SATA/jmicron controller. So instead of having a total of 2.5 TB of storage and 3 dvd/cd burners, I would get 1 dvd/cd burner and 1.5 TB of storage. Kinda makes the money I spent on the other drives pointless.... -- JMicron PATA/SATA Controller does not work https://bugs.launchpad.net/bugs/57502 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From sfabel at gmx.net Fri Jan 11 00:47:28 2008 From: sfabel at gmx.net (Stephan Fabel) Date: Fri, 11 Jan 2008 00:47:28 -0000 Subject: [Bug 181904] bttv driver timout and reset References: <20080111004728.8267.65084.malonedeb@potassium.ubuntu.com> Message-ID: <20080111004728.8267.65084.malonedeb@potassium.ubuntu.com> Public bug reported: Ubuntu Gutsy: using /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/bt8xx/bttv.ko as shipped with the distribution, I get the following error sooner or later (dmesg | tail): [ 1362.107570] bttv0: registered device video0 [ 1362.107846] bttv0: registered device vbi0 [ 1362.107922] bttv0: PLL: 28636363 => 35468950 . ok [ 1412.306519] bt878: AUDIO driver version 0.0.0 loaded [ 1417.807336] bttv0: timeout: drop=11 irq=30/240, risc=079d895c, bits: HSYNC [ 1417.807448] bttv0: reset, reinitialize [ 1417.807483] bttv0: PLL: 28636363 => 35468950 . ok [ 1453.126896] bttv0: timeout: drop=22 irq=60/397, risc=06c30abc, bits: HSYNC [ 1453.127210] bttv0: reset, reinitialize [ 1453.127246] bttv0: PLL: 28636363 => 35468950 . ok I am using an S-Video input for a camera capture. The following applications don't show an image (some show a blue screen, others just white noise or a scrambled picture - all apps have been configured to use S-Video input): vlc, zapping, xawtv. tvtime is showing a perfect picture though. I am using OpenCV to capture the frames and without changing the code, it suddenly stopped working. The error message here was: VIDIOC_DQBUF error 5, Input/output error (After a couple of frames) This happens randomly and I have no way of provoking this. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- bttv driver timout and reset https://bugs.launchpad.net/bugs/181904 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From car_crazy33 at hotmail.com Fri Jan 11 01:07:34 2008 From: car_crazy33 at hotmail.com (Kreuger Burns) Date: Fri, 11 Jan 2008 01:07:34 -0000 Subject: [Bug 181522] Re: ndiswrapper - wireless card randomly stopped working References: <20080109151939.16583.50936.malonedeb@gandwana.ubuntu.com> Message-ID: <20080111010734.14423.16838.malone@gangotri.ubuntu.com> Anyone got any ideas? -- ndiswrapper - wireless card randomly stopped working https://bugs.launchpad.net/bugs/181522 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From U_BChenelle at umassd.edu Fri Jan 11 04:28:41 2008 From: U_BChenelle at umassd.edu (Toehead) Date: Fri, 11 Jan 2008 04:28:41 -0000 Subject: [Bug 58064] Re: loss of Ethernet in Armada 6500 References: <20060829021941.5577.7881.malonedeb@gandwana.ubuntu.com> <20080108023826.25248.22540.malone@gandwana.ubuntu.com> Message-ID: The problem seems to have been fixed in the later builds. Thanks for all the hard work that makes this such a sucessful project. Thanks! Sent from my iPhone On Jan 7, 2008, at 9:38 PM, gQuigs wrote: > Thank you for taking the time to report this bug and helping to make > Ubuntu better. You reported this bug a while ago and there hasn't been > any activity in it recently. We were wondering is this still an issue > for you? Can you try with latest Ubuntu release? Thanks in advance. > > -- > loss of Ethernet in Armada 6500 > https://bugs.launchpad.net/bugs/58064 > You received this bug notification because you are a direct subscriber > of the bug. -- loss of Ethernet in Armada 6500 https://bugs.launchpad.net/bugs/58064 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From gQuigs at gMail.com Fri Jan 11 04:37:39 2008 From: gQuigs at gMail.com (gQuigs) Date: Fri, 11 Jan 2008 04:37:39 -0000 Subject: [Bug 58064] Re: loss of Ethernet in Armada 6500 References: <20060829021941.5577.7881.malonedeb@gandwana.ubuntu.com> Message-ID: <20080111043739.30793.19581.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: New => Fix Released -- loss of Ethernet in Armada 6500 https://bugs.launchpad.net/bugs/58064 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From gseymour at nicor.co.za Fri Jan 11 08:04:07 2008 From: gseymour at nicor.co.za (GlennS) Date: Fri, 11 Jan 2008 08:04:07 -0000 Subject: [Bug 110585] Re: Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx References: <20070427154808.15141.14118.malonedeb@gandwana.ubuntu.com> Message-ID: <20080111080407.8267.42272.malone@potassium.ubuntu.com> I had exactly the same problem on my G1 as well. After searching the web all morning and reading all your posts, I was not bothered in following all the steps outlined in the fix ISO. I am using Gutsy 7.10 server insall and had the same problem. So, what I ended up doing was, used the SmartStart CD 5.5 and did the usual steps there, when the disc is swapped with server ubuntu, when you start up normally and it asks you your language, I used back, which takes you to the menu of install opions. I selected Shell out to prompt. at the prompt I typed: modprobe -r sym53c8xx and hit enter then I typed: exit taking me back to the menu. And then selected language and followed through - no issue. It is currently installing the base system - huraaah! -- Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx https://bugs.launchpad.net/bugs/110585 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From martin.pitt at ubuntu.com Fri Jan 11 12:19:20 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Fri, 11 Jan 2008 12:19:20 -0000 Subject: [Bug 110585] Re: Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx References: <20070427154808.15141.14118.malonedeb@gandwana.ubuntu.com> Message-ID: <20080111121921.19413.31541.malone@potassium.ubuntu.com> This is not even understood for Gutsy and Hardy so far, so nothing to fix for Dapper. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Triaged => Won't Fix Target: dapper-updates => None ** Changed in: linux (Ubuntu) Sourcepackagename: linux-source-2.6.22 => linux Target: ubuntu-7.10-beta => None ** Tags added: qa-hardy-list -- Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx https://bugs.launchpad.net/bugs/110585 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From richard at candrarthur.demon.co.uk Fri Jan 11 17:31:22 2008 From: richard at candrarthur.demon.co.uk (rsa) Date: Fri, 11 Jan 2008 17:31:22 -0000 Subject: [Bug 34551] Re: scanimage not accessing epson perfection 2450 References: <20060312025347.17044.47942.malonedeb@gangotri.ubuntu.com> Message-ID: <20080111173122.8267.89581.malone@potassium.ubuntu.com> Since 6.06, I'd had no success with USB, instead went the Firewire route. I ran 'sudo chmod a+rw /dev/sg3' for each session. I was delighted to find this workaround was no longer required when I installed 7.10 a few weeks ago (oh joy!). My motherboard died two weeks later and the only replacement I could find lacked Firewire (oh sorrow!). Back to USB, 'sane-find-scanner' and 'scanimage -L' report the presence of the scanner, but I always got the I/O error if I tried to scan. The post above regarding USB 1.1/2.0 got me thinking and I dug out an old OrangeLink Firewire/USB PCI card (I'm guessing that it's USB 1.1). Plugged in the USB and it works! Plugged in the Firewire, that works too! Thank you David. -- scanimage not accessing epson perfection 2450 https://bugs.launchpad.net/bugs/34551 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From Maurice.e.johnson1.ctr at navy.mil Fri Jan 11 19:16:32 2008 From: Maurice.e.johnson1.ctr at navy.mil (zuesse) Date: Fri, 11 Jan 2008 19:16:32 -0000 Subject: [Bug 182092] kernel not configured for auditing (auditdctl) References: <20080111191632.20223.87980.malonedeb@gandwana.ubuntu.com> Message-ID: <20080111191632.20223.87980.malonedeb@gandwana.ubuntu.com> Public bug reported: In the renning kernel configuration file (/boot/config-2.6.22-14-server) AUDIT configuration is incomplete. This causes a problem with auditctl. This problem has been registered as Bug #140784. However, it has yet to be fixed. This I believe, is because it hasn't been looked at by the correct project. The corrected line(s) in the kernel configuration file should read: CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_GENERIC=y #### HOWEVER #### One of these is not set. Specifically: # CONFIG_AUDITSYSCALL is not set Recommend ranking this as HIGH ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- kernel not configured for auditing (auditdctl) https://bugs.launchpad.net/bugs/182092 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From ben.collins at ubuntu.com Fri Jan 11 20:28:00 2008 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 11 Jan 2008 20:28:00 -0000 Subject: [Bug 62995] Re: Linux doesnt support ENE CB-712 SD card reader References: <20060929150123.2244.82060.malonedeb@gangotri.ubuntu.com> Message-ID: <20080111202800.24572.87709.malone@gangotri.ubuntu.com> This vendor/device ID already exists in linux 2.6.24, our current kernel for hardy. ** Changed in: linux (Ubuntu) Assignee: Ubuntu Kernel Team (ubuntu-kernel-team) => Ben Collins (ben-collins) Status: Triaged => Fix Released -- Linux doesnt support ENE CB-712 SD card reader https://bugs.launchpad.net/bugs/62995 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From jai at jaiharrison.com Fri Jan 11 21:06:54 2008 From: jai at jaiharrison.com (Jai Harrison) Date: Fri, 11 Jan 2008 21:06:54 -0000 Subject: [Bug 62995] Re: Linux doesnt support ENE CB-712 SD card reader References: <20060929150123.2244.82060.malonedeb@gangotri.ubuntu.com> Message-ID: <20080111210654.20323.46594.malone@gandwana.ubuntu.com> Can anyone with the reader confirm that this works in the latest version of Hardy? I would test it but I don't have any hard drive space going spare to install the latest nightly on. -- Linux doesnt support ENE CB-712 SD card reader https://bugs.launchpad.net/bugs/62995 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From forums at fletchersweb.net Fri Jan 11 21:32:17 2008 From: forums at fletchersweb.net (David Fletcher) Date: Fri, 11 Jan 2008 21:32:17 -0000 Subject: [Bug 34551] Re: scanimage not accessing epson perfection 2450 References: <20060312025347.17044.47942.malonedeb@gangotri.ubuntu.com> Message-ID: <20080111213217.20323.84134.malone@gandwana.ubuntu.com> My pleasure! You might like to know that I recently built a new PC using an Asus M2N-E SLI board and an Athlon dual core energy efficient processor with OCZ heatsink and an Antec case with Earthwatts power supply. The board has a firewire socket, and the Epson 2450 scanner "just works" with Kubuntu Gutsy and firewire on this board. And this new machine runs cold - unlike the P4 that's more like an expensive fan heater. Actually, there was a better solution than chmod every time when using Feisty. I found out how to write a udev rule which I called 10-dave.rules:- ATTRS{model}=="GT-9700", ATTRS{vendor}=="EPSON", GROUP="scanner" and saved into /etc/udev/ I was told that the problem was that somebody had got rule wrong by entering epson or Epson instead of EPSON, which meant that this machine was not recognised, therefore it was not assigned to the scanner group therefore nobody could access it. I also heard that somebody in Red Hat was working on a USB solution for this scanner, and had it working, but because I've got nothing else that needs a firewire socket, I'll just keep this system as it is. I have an issue with the sound system on this motherboard but my scanner works. -- scanimage not accessing epson perfection 2450 https://bugs.launchpad.net/bugs/34551 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From jbinpg at shaw.ca Fri Jan 11 23:39:46 2008 From: jbinpg at shaw.ca (Jack Bowling) Date: Fri, 11 Jan 2008 23:39:46 -0000 Subject: [Bug 34551] Re: scanimage not accessing epson perfection 2450 References: <20060312025347.17044.47942.malonedeb@gangotri.ubuntu.com> <20080111213217.20323.84134.malone@gandwana.ubuntu.com> Message-ID: <20080111233946.GA17086@shaw.ca> On Fri, Jan 11, 2008 at 09:32:17PM +0000, David Fletcher wrote: > My pleasure! > > You might like to know that I recently built a new PC using an Asus > M2N-E SLI board and an Athlon dual core energy efficient processor with > OCZ heatsink and an Antec case with Earthwatts power supply. The board > has a firewire socket, and the Epson 2450 scanner "just works" with > Kubuntu Gutsy and firewire on this board. And this new machine runs cold > - unlike the P4 that's more like an expensive fan heater. > > Actually, there was a better solution than chmod every time when using > Feisty. I found out how to write a udev rule which I called > 10-dave.rules:- > > ATTRS{model}=="GT-9700", ATTRS{vendor}=="EPSON", GROUP="scanner" > > and saved into /etc/udev/ I was told that the problem was that somebody had got rule wrong by entering epson or Epson instead of EPSON, which meant that this machine was not recognised, therefore it was not assigned to the scanner group therefore nobody could access it. > I also heard that somebody in Red Hat was working on a USB solution for this scanner, and had it working, but because I've got nothing else that needs a firewire socket, I'll just keep this system as it is. I have an issue with the sound system on this motherboard but my scanner works. > Just tried adding the above stanza into /etc/udev/10-jb.rules. Made no difference. I really think it is something to do with the USB implementation of the 2450 itself. Some units just may have a borked USB port. Didn't even know the scanner had a firewire port :) I'll try that and see what happens. Jack Ubuntu 7.10 -- scanimage not accessing epson perfection 2450 https://bugs.launchpad.net/bugs/34551 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From dave at thefletchers.net Sat Jan 12 00:01:34 2008 From: dave at thefletchers.net (David Fletcher) Date: Sat, 12 Jan 2008 00:01:34 -0000 Subject: [Bug 34551] Re: scanimage not accessing epson perfection 2450 References: <20060312025347.17044.47942.malonedeb@gangotri.ubuntu.com> Message-ID: <20080112000134.13962.74517.malone@gangotri.ubuntu.com> Jack, Yes I agree with you. I don't think it will make any difference at all. In my experience, the only way you are going to get this model to work is with USB1.1 or firewire. As you have Gutsy installed you'd be better off removing my udev rule because it isn't needed. Plug it into the firewire port and I think it will "Just Work". With Feisty the udev rule, and connection using firewire is necessary. Anything earlier, I don't know. -- scanimage not accessing epson perfection 2450 https://bugs.launchpad.net/bugs/34551 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From tepsipakki at ubuntu.com Sat Jan 12 00:04:52 2008 From: tepsipakki at ubuntu.com (Timo Aaltonen) Date: Sat, 12 Jan 2008 00:04:52 -0000 Subject: [Bug 18489] Re: mice detected as imps2 not as ps2++ References: <20060113135641.21012.86896.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080112000453.14195.23251.malone@gangotri.ubuntu.com> The Protocol is no longer written in the config file, the driver chooses it automatically. ** Changed in: xorg (Ubuntu) Status: Triaged => Fix Released -- mice detected as imps2 not as ps2++ https://bugs.launchpad.net/bugs/18489 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From michael at trunner.de Sat Jan 12 00:06:33 2008 From: michael at trunner.de (Michael Trunner) Date: Sat, 12 Jan 2008 00:06:33 -0000 Subject: [Bug 182158] dd slow when writing to partition of reading References: <20080112000633.24811.97234.malonedeb@gandwana.ubuntu.com> Message-ID: <20080112000633.24811.97234.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image I tried to copy a partition images over the network with nc and dd. On my partition sda9 it was very fast about 55 Mb/s. On the sda2 I had only 8 Mb/s. With dstat I found the reason: When writing data to the sda2, the kernel reads the same amount of data that it is writing. On partition sda9 there was nearly no read disk access. The problem exist even in init 1, so I think it is a kernel problem. Inotify was off. I used the followoing commands: client: nc -l -p 19000 | dd of=/dev/sda2 or nc -l -p 19000 > /dev/sda2 (makes no difference) server: dd if=/dev/sda2 | nc targethost 19000 It tried the same with different computers on my laptop some partitions have the same problem. Any Ideas? ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New ** Summary changed: - dd slow when writing to partition of reading + slow raw writing to partition because of read access -- slow raw writing to partition because of read access https://bugs.launchpad.net/bugs/182158 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From jbinpg at shaw.ca Sat Jan 12 06:06:47 2008 From: jbinpg at shaw.ca (Jack Bowling) Date: Sat, 12 Jan 2008 06:06:47 -0000 Subject: [Bug 34551] Re: scanimage not accessing epson perfection 2450 References: <20060312025347.17044.47942.malonedeb@gangotri.ubuntu.com> <20080112000134.13962.74517.malone@gangotri.ubuntu.com> Message-ID: <20080112060647.GA19049@shaw.ca> On Sat, Jan 12, 2008 at 12:01:34AM +0000, David Fletcher wrote: > Jack, > > Yes I agree with you. I don't think it will make any difference at all. > > In my experience, the only way you are going to get this model to work > is with USB1.1 or firewire. > > As you have Gutsy installed you'd be better off removing my udev rule > because it isn't needed. Plug it into the firewire port and I think it > will "Just Work". > > With Feisty the udev rule, and connection using firewire is necessary. > > Anything earlier, I don't know. > Got myself a 6-pin Firewire cable and plugged it into my 2450 and it works perfectly. Thanks for the heads up, David. Jack -- scanimage not accessing epson perfection 2450 https://bugs.launchpad.net/bugs/34551 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From michael at trunner.de Sat Jan 12 13:03:54 2008 From: michael at trunner.de (Michael Trunner) Date: Sat, 12 Jan 2008 13:03:54 -0000 Subject: [Bug 182279] noinotify kerneloption doesn't work References: <20080112130354.24707.75114.malonedeb@gandwana.ubuntu.com> Message-ID: <20080112130354.24707.75114.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image I tried to deactivated inotify for a test. But the kernel option noinotify doesn't work. What I've done: I added noinotify in grub on startup. But Inotify was still active. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- noinotify kerneloption doesn't work https://bugs.launchpad.net/bugs/182279 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From jpeddicord at ubuntu.com Sat Jan 12 15:05:15 2008 From: jpeddicord at ubuntu.com (Jacob Peddicord) Date: Sat, 12 Jan 2008 15:05:15 -0000 Subject: [Bug 181255] Re: [hardy] iwl3945 wireless LED is never on References: <20080108143243.7349.16584.malonedeb@gangotri.ubuntu.com> Message-ID: <20080112150515.22632.33384.malone@gangotri.ubuntu.com> I can also confirm this. Wireless performs fine, there is just no status indicator for wifi activity. -- [hardy] iwl3945 wireless LED is never on https://bugs.launchpad.net/bugs/181255 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From javier.cabezas at gmail.com Sat Jan 12 15:42:41 2008 From: javier.cabezas at gmail.com (Javier Cabezas) Date: Sat, 12 Jan 2008 15:42:41 -0000 Subject: [Bug 182320] Kernel errors during boot when loading ath wireless modules References: <20080112154241.12484.54991.malonedeb@potassium.ubuntu.com> Message-ID: <20080112154241.12484.54991.malonedeb@potassium.ubuntu.com> Public bug reported: Binary package hint: linux-restricted-modules Hardy Heron i386 Kernel 2.6.24-2-generic Macbook Core Duo I get the following errors when booting (although the card seems to work). [ 76.598511] ath_hal: module license 'Proprietary' taints kernel. [ 76.623794] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 76.624228] sysctl table check failed: /dev/ath .7.9 Unknown sysctl binary path [ 76.624547] Pid: 3891, comm: modprobe Tainted: P 2.6.24-2-generic #1 [ 76.624653] [] set_fail+0x45/0x60 [ 76.624760] [] sysctl_check_table+0x296/0x5b0 [ 76.624862] [] sysctl_head_finish+0x18/0x30 [ 76.624966] [] sysctl_check_table+0x2aa/0x5b0 [ 76.625068] [] sysctl_set_parent+0x19/0x30 [ 76.625174] [] register_sysctl_table+0x50/0xa0 [ 76.625277] [] init_ath_hal+0x77/0x8d [ath_hal] [ 76.625388] [] sys_init_module+0x126/0x19c0 [ 76.625502] [] __kmalloc+0x0/0x110 [ 76.625606] [] sysenter_past_esp+0x6b/0xa9 [ 76.625714] ======================= [ 76.625775] sysctl table check failed: /dev/ath/hal .7.9.-2 Unknown sysctl binary path [ 76.626180] Pid: 3891, comm: modprobe Tainted: P 2.6.24-2-generic #1 [ 76.626246] [] set_fail+0x45/0x60 [ 76.626347] [] sysctl_check_table+0x296/0x5b0 [ 76.626451] [] sysctl_check_table+0x2aa/0x5b0 [ 76.626557] [] sysctl_head_finish+0x18/0x30 [ 76.626661] [] sysctl_check_table+0x2aa/0x5b0 [ 76.626763] [] sysctl_set_parent+0x19/0x30 [ 76.626867] [] register_sysctl_table+0x50/0xa0 [ 76.626970] [] init_ath_hal+0x77/0x8d [ath_hal] [ 76.627080] [] sys_init_module+0x126/0x19c0 [ 76.627192] [] __kmalloc+0x0/0x110 [ 76.627296] [] sysenter_past_esp+0x6b/0xa9 [ 76.627402] ======================= [ 76.627463] sysctl table check failed: /dev/ath/hal/dma_beacon_response_time .7.9.-2.-2 Unknown sysctl binary path [ 76.627946] Pid: 3891, comm: modprobe Tainted: P 2.6.24-2-generic #1 [ 76.628011] [] set_fail+0x45/0x60 [ 76.628112] [] sysctl_check_table+0x296/0x5b0 [ 76.628216] [] sysctl_check_table+0x2aa/0x5b0 [ 76.628321] [] sysctl_check_table+0x2aa/0x5b0 [ 76.628423] [] sysctl_head_finish+0x18/0x30 [ 76.628527] [] sysctl_check_table+0x2aa/0x5b0 [ 76.628628] [] sysctl_set_parent+0x19/0x30 [ 76.628732] [] register_sysctl_table+0x50/0xa0 [ 76.628835] [] init_ath_hal+0x77/0x8d [ath_hal] [ 76.628943] [] sys_init_module+0x126/0x19c0 [ 76.629054] [] __kmalloc+0x0/0x110 [ 76.629159] [] sysenter_past_esp+0x6b/0xa9 [ 76.629265] ======================= [ 76.629325] sysctl table check failed: /dev/ath/hal/sw_beacon_response_time .7.9.-2.-2 Unknown sysctl binary path [ 76.629807] Pid: 3891, comm: modprobe Tainted: P 2.6.24-2-generic #1 [ 76.629901] [] set_fail+0x45/0x60 [ 76.630003] [] sysctl_check_table+0x296/0x5b0 [ 76.630108] [] sysctl_check_table+0x2aa/0x5b0 [ 76.630212] [] sysctl_check_table+0x2aa/0x5b0 [ 76.630314] [] sysctl_head_finish+0x18/0x30 [ 76.630418] [] sysctl_check_table+0x2aa/0x5b0 [ 76.630520] [] sysctl_set_parent+0x19/0x30 [ 76.630624] [] register_sysctl_table+0x50/0xa0 [ 76.630727] [] init_ath_hal+0x77/0x8d [ath_hal] [ 76.630836] [] sys_init_module+0x126/0x19c0 [ 76.630949] [] __kmalloc+0x0/0x110 [ 76.631053] [] sysenter_past_esp+0x6b/0xa9 [ 76.631159] ======================= [ 76.631219] sysctl table check failed: /dev/ath/hal/swba_backoff .7.9.-2.-2 Unknown sysctl binary path [ 76.631699] Pid: 3891, comm: modprobe Tainted: P 2.6.24-2-generic #1 [ 76.631765] [] set_fail+0x45/0x60 [ 76.631866] [] sysctl_check_table+0x296/0x5b0 [ 76.631970] [] sysctl_check_table+0x2aa/0x5b0 [ 76.632074] [] sysctl_check_table+0x2aa/0x5b0 [ 76.632176] [] sysctl_head_finish+0x18/0x30 [ 76.632280] [] sysctl_check_table+0x2aa/0x5b0 [ 76.632382] [] sysctl_set_parent+0x19/0x30 [ 76.632486] [] register_sysctl_table+0x50/0xa0 [ 76.632589] [] init_ath_hal+0x77/0x8d [ath_hal] [ 76.632696] [] sys_init_module+0x126/0x19c0 [ 76.632808] [] __kmalloc+0x0/0x110 [ 76.632912] [] sysenter_past_esp+0x6b/0xa9 [ 76.633018] ======================= ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- Kernel errors during boot when loading ath wireless modules https://bugs.launchpad.net/bugs/182320 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From martijn at foodfight.org Sun Jan 13 09:34:59 2008 From: martijn at foodfight.org (Martijn van de Streek) Date: Sun, 13 Jan 2008 09:34:59 -0000 Subject: [Bug 182489] Atheros wireless (AR5006EG) not working on ASUS Eee PC References: <20080113093459.12584.43281.malonedeb@gangotri.ubuntu.com> Message-ID: <20080113093459.12584.43281.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-restricted-modules The Eee PC has non-working wireless out of the box. A patch is available from the madwifi website: http://madwifi.org/ticket/1679 I'd like to have working wireless in hardy, without having to patch/compile manually :) ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- Atheros wireless (AR5006EG) not working on ASUS Eee PC https://bugs.launchpad.net/bugs/182489 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From martijn at foodfight.org Sun Jan 13 09:35:52 2008 From: martijn at foodfight.org (Martijn van de Streek) Date: Sun, 13 Jan 2008 09:35:52 -0000 Subject: [Bug 182489] Re: Atheros wireless (AR5006EG) not working on ASUS Eee PC References: <20080113093459.12584.43281.malonedeb@gangotri.ubuntu.com> Message-ID: <20080113093552.12584.10637.malone@gangotri.ubuntu.com> ** Attachment added: "lspci-vvn.txt" http://launchpadlibrarian.net/11316269/lspci-vvn.txt -- Atheros wireless (AR5006EG) not working on ASUS Eee PC https://bugs.launchpad.net/bugs/182489 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From martijn at foodfight.org Sun Jan 13 09:35:40 2008 From: martijn at foodfight.org (Martijn van de Streek) Date: Sun, 13 Jan 2008 09:35:40 -0000 Subject: [Bug 182489] Re: Atheros wireless (AR5006EG) not working on ASUS Eee PC References: <20080113093459.12584.43281.malonedeb@gangotri.ubuntu.com> Message-ID: <20080113093540.12584.94387.malone@gangotri.ubuntu.com> ** Attachment added: "lspci-vv.txt" http://launchpadlibrarian.net/11316268/lspci-vv.txt -- Atheros wireless (AR5006EG) not working on ASUS Eee PC https://bugs.launchpad.net/bugs/182489 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From martijn at foodfight.org Sun Jan 13 09:36:30 2008 From: martijn at foodfight.org (Martijn van de Streek) Date: Sun, 13 Jan 2008 09:36:30 -0000 Subject: [Bug 182489] Re: Atheros wireless (AR5006EG) not working on ASUS Eee PC References: <20080113093459.12584.43281.malonedeb@gangotri.ubuntu.com> Message-ID: <20080113093630.12584.91295.malone@gangotri.ubuntu.com> ** Attachment added: "dmesg.txt" http://launchpadlibrarian.net/11316271/dmesg.txt -- Atheros wireless (AR5006EG) not working on ASUS Eee PC https://bugs.launchpad.net/bugs/182489 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From lizardmenke at gmail.com Sun Jan 13 12:15:46 2008 From: lizardmenke at gmail.com (lizardmenke) Date: Sun, 13 Jan 2008 12:15:46 -0000 Subject: [Bug 181255] Re: [hardy] iwl3945 wireless LED is never on References: <20080108143243.7349.16584.malonedeb@gangotri.ubuntu.com> Message-ID: <20080113121546.24811.62104.malone@gandwana.ubuntu.com> I can confirm this [Hardy Alpa-3] using a Sony vaio VGN-N11s Laptop (Intel 3945). I have a wireless connection (WEP) But no the LED stays off. -- [hardy] iwl3945 wireless LED is never on https://bugs.launchpad.net/bugs/181255 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From knizek at volny.cz Sun Jan 13 17:16:35 2008 From: knizek at volny.cz (Milan Knizek) Date: Sun, 13 Jan 2008 17:16:35 -0000 Subject: [Bug 164270] Re: SonyEricsson P1i USB Storage I/O error References: <20071121065413.7273.8435.malonedeb@gandwana.ubuntu.com> Message-ID: <20080113171635.14066.40818.malone@gangotri.ubuntu.com> In Ubuntu 8.04 alpha 3 (I have installed it just for the test on an external usb drive) the files get copied fine. Is there a patch for the current gutsy (7.04) kernel? I would like to stick with Gutsy until Hardy gets stable. -- SonyEricsson P1i USB Storage I/O error https://bugs.launchpad.net/bugs/164270 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From simonwerner at gmail.com Sun Jan 13 19:36:30 2008 From: simonwerner at gmail.com (SimonWerner) Date: Sun, 13 Jan 2008 19:36:30 -0000 Subject: [Bug 45295] Re: PCMCIA does not bring up eth1 during boot References: <20060517191118.15142.67878.malonedeb@gandwana.ubuntu.com> Message-ID: <20080113193630.12484.5463.malone@potassium.ubuntu.com> This is still a problem for me on Hardy Heron Alpha3. -- PCMCIA does not bring up eth1 during boot https://bugs.launchpad.net/bugs/45295 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From t.vetterlein at gmail.com Sun Jan 13 23:01:24 2008 From: t.vetterlein at gmail.com (Tom Vetterlein) Date: Sun, 13 Jan 2008 23:01:24 -0000 Subject: [Bug 181255] Re: [hardy] iwl3945 wireless LED is never on References: <20080108143243.7349.16584.malonedeb@gangotri.ubuntu.com> Message-ID: <20080113230124.14066.30144.malone@gangotri.ubuntu.com> I can confirm this too. Running an R61 fully up to date Hardy. -- [hardy] iwl3945 wireless LED is never on https://bugs.launchpad.net/bugs/181255 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From dpsims at dpsims.com Sun Jan 13 23:17:26 2008 From: dpsims at dpsims.com (Dave) Date: Sun, 13 Jan 2008 23:17:26 -0000 Subject: [Bug 37452] Re: fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100, Dell SASR5/i) References: <20060331083135.5415.666.malonedeb@gangotri.ubuntu.com> Message-ID: <20080113231726.14066.65390.malone@gangotri.ubuntu.com> So.... This seems to have been going on for a long time.... I also have some Dell PowerEdge 860s with Dell SASR5/i Raid controllers and I would like to run Dapper on them.... Does anyone have an installation porcess that can work using a normal Dapper server install CD?? Perhaps a brief HowTo would suffice... There are a number of workarounds above, but they all seem a bit daunting... I need a process that can be repeated on multiple servers by normal admins... You know... A boot-this-CD-and- follow-the-prompts sort of install... Thanks, Dave -- fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100, Dell SASR5/i) https://bugs.launchpad.net/bugs/37452 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From kuehnik_0505 at gmx-topmail.de Mon Jan 14 00:34:27 2008 From: kuehnik_0505 at gmx-topmail.de (kuehnik) Date: Mon, 14 Jan 2008 00:34:27 -0000 Subject: [Bug 182257] Re: metapackage linux-image-k7 does not depend on latest kernel References: <20080112113008.13962.99547.malonedeb@gangotri.ubuntu.com> Message-ID: <20080114003427.31718.45960.launchpad@gangotri.ubuntu.com> ** Visibility changed to: Public -- metapackage linux-image-k7 does not depend on latest kernel https://bugs.launchpad.net/bugs/182257 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From Olivier.Dalle at gmail.com Mon Jan 14 00:39:12 2008 From: Olivier.Dalle at gmail.com (oliv1207) Date: Mon, 14 Jan 2008 00:39:12 -0000 Subject: [Bug 16247] Re: ndiswrapper hangs on boot if running on battery References: <20060113134532.21012.77031.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080114003912.24707.97727.malone@gandwana.ubuntu.com> Try recompiling your kernel with the CONFIG_4KSTACKS flag off. It is recommended somewhere in the ndiswrapper documentaton and it actually fixed a similar bug I had with a usbwifi key (TEW-424UB with RTL8187B chipset, wifi-radar freeze on DHCPDISCOVER). The funny part is I also have this well known "wifi-freeze-on-battery" bug on my D600 (hence my post here) but when I try to run the same modified kernel without CONFIG_4KSTACKS on my D600, ndiswrapper fails (silently) to activate my wlan0 interface even when running on wired power. Still investigating, anyone successful please post foillowup here. (my last unsuccessful try was with FC6, kernel 2.6.22, ndiswrapper 1.51, bcmwl5 drivers provided by Dell in R81435 and SP3308). Olivier. -- ndiswrapper hangs on boot if running on battery https://bugs.launchpad.net/bugs/16247 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From ozone at webgroup.org Mon Jan 14 01:34:19 2008 From: ozone at webgroup.org (David Tomaschik) Date: Mon, 14 Jan 2008 01:34:19 -0000 Subject: [Bug 181255] Re: [hardy] iwl3945 wireless LED is never on References: <20080108143243.7349.16584.malonedeb@gangotri.ubuntu.com> Message-ID: <20080114013419.31718.95369.malone@gangotri.ubuntu.com> Also occurs on a System 76 Pangolin Value. (Aka Compal IFL90/IFL91). -- [hardy] iwl3945 wireless LED is never on https://bugs.launchpad.net/bugs/181255 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From steven at nchc.org.tw Mon Jan 14 04:54:47 2008 From: steven at nchc.org.tw (steven_shiau) Date: Mon, 14 Jan 2008 04:54:47 -0000 Subject: [Bug 182765] kernel BUG at /build/buildd/linux-2.6.24/fs/attr.c:138! References: <20080114045447.31560.56820.malonedeb@gangotri.ubuntu.com> Message-ID: <20080114045447.31560.56820.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image I used the live helper in gutsy to create a hardy live. [gutsyy]~/tmp/ubuntu-live>LANG=C dpkg -l live-helper Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-f/Unpacked/Failed-cfg/Half-inst/t-aWait/T-pend |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii live-helper 1.0~a28-1 Debian Live helper programs The script to create such an iso is attached. The iso was created successfully. It also booted successfully. However, when I entered the command line in the hardy live, I did: 1. dhclient 2. apt-get update 3. apt-get install sshfs then it showed me a kernel Oops (attached). I put the created iso in http://www.stevenshiau.org/misc/hardy/ubuntu-live.iso I am wonder why such a problem does not exist in Hardy alpha 3 installation CD (http://cdimage.ubuntu.com/cdimage/releases/hardy/alpha-3/hardy-desktop-i386.iso) ? Both of them use the same kernel 2.6.24-3. Unionfs is 1.4 and squashfs is 3.3. Any trick to avoid this ? ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- kernel BUG at /build/buildd/linux-2.6.24/fs/attr.c:138! https://bugs.launchpad.net/bugs/182765 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From steven at nchc.org.tw Mon Jan 14 04:55:17 2008 From: steven at nchc.org.tw (steven_shiau) Date: Mon, 14 Jan 2008 04:55:17 -0000 Subject: [Bug 182765] Re: kernel BUG at /build/buildd/linux-2.6.24/fs/attr.c:138! References: <20080114045447.31560.56820.malonedeb@gangotri.ubuntu.com> Message-ID: <20080114045517.12484.88357.malone@potassium.ubuntu.com> ** Attachment added: "The script to create hardy live by live helper" http://launchpadlibrarian.net/11323340/create-hardy-live -- kernel BUG at /build/buildd/linux-2.6.24/fs/attr.c:138! https://bugs.launchpad.net/bugs/182765 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From steven at nchc.org.tw Mon Jan 14 04:55:51 2008 From: steven at nchc.org.tw (steven_shiau) Date: Mon, 14 Jan 2008 04:55:51 -0000 Subject: [Bug 182765] Re: kernel BUG at /build/buildd/linux-2.6.24/fs/attr.c:138! References: <20080114045447.31560.56820.malonedeb@gangotri.ubuntu.com> Message-ID: <20080114045551.24707.75707.malone@gandwana.ubuntu.com> ** Attachment added: "The kernel Oops messages when sshfs was installed" http://launchpadlibrarian.net/11323341/fuse-error-hardy -- kernel BUG at /build/buildd/linux-2.6.24/fs/attr.c:138! https://bugs.launchpad.net/bugs/182765 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From mrmazda at ij.net Mon Jan 14 05:23:28 2008 From: mrmazda at ij.net (Felix Miata) Date: Mon, 14 Jan 2008 05:23:28 -0000 Subject: [Bug 32123] Re: initramfs not generated correctly on upgrade to Dapper References: <20060220130413.1427.33476.malonedeb@gangotri.ubuntu.com> Message-ID: <20080114052328.12618.78848.malone@potassium.ubuntu.com> Summary should be changed from "initramfs not generated correctly on upgrade to Dapper" to "initramfs not generated correctly on dist- upgrade". This just happened to me going from Gutsy to Hardy. Marking kernels for reinstallation and applying in Synaptic made system bootable with Hardy kernels and newer larger initrds. -- initramfs not generated correctly on upgrade to Dapper https://bugs.launchpad.net/bugs/32123 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From steven at nchc.org.tw Mon Jan 14 06:43:35 2008 From: steven at nchc.org.tw (steven_shiau) Date: Mon, 14 Jan 2008 06:43:35 -0000 Subject: [Bug 182765] Re: kernel BUG at /build/buildd/linux-2.6.24/fs/attr.c:138! References: <20080114045447.31560.56820.malonedeb@gangotri.ubuntu.com> Message-ID: <20080114064335.24707.51125.malone@gandwana.ubuntu.com> BTW, forgot to say, before I ran the script to create hardy live, I appended the following in the file /usr/share/cdebootstrap/suites: ------------------- Suite: hardy Config: generic-ubuntu Keyring: ubuntu-archive-keyring.gpg ------------------- -- kernel BUG at /build/buildd/linux-2.6.24/fs/attr.c:138! https://bugs.launchpad.net/bugs/182765 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From bugpost.tormod at gmail.com Mon Jan 14 07:27:49 2008 From: bugpost.tormod at gmail.com (Tormod Volden) Date: Mon, 14 Jan 2008 07:27:49 -0000 Subject: [Bug 32123] Re: initramfs not generated correctly on dist-upgrade References: <20060220130413.1427.33476.malonedeb@gangotri.ubuntu.com> Message-ID: <20080114072750.4311.62115.launchpad@gangotri.ubuntu.com> ** Summary changed: - initramfs not generated correctly on upgrade to Dapper + initramfs not generated correctly on dist-upgrade ** Changed in: initramfs-tools (Ubuntu) Status: Incomplete => Confirmed -- initramfs not generated correctly on dist-upgrade https://bugs.launchpad.net/bugs/32123 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From Johan.Eneland at telia.com Mon Jan 14 07:45:57 2008 From: Johan.Eneland at telia.com (JoE) Date: Mon, 14 Jan 2008 07:45:57 -0000 Subject: [Bug 150259] Re: Gutsy hangs at boot with COMRESET failed error (kernel 2.6.22-13 and 2.6.22-14) References: <20071007165823.15222.92545.malonedeb@gandwana.ubuntu.com> Message-ID: <20080114074557.24707.1945.malone@gandwana.ubuntu.com> I have upgraded to Ubuntu 7.10 (2008-01-13) and got this (old) bug. The kernel 2.6.22-14-386 is never booting for me. If I use the kernel 2.6.20-16-386 it works as expected. The boot is stuck when the window with the Ubuntulogo is opening. after about 3 minutes it changes to some kind of text mode with the cursor (initramfs) sometimes it dont respond for keyboard. Sometimes it is possible to type for example ls. If I type exit the response can be "BusyBox v1.1.3 (Debian 1:1.1.3-5 ubuntu7)..." Note: The attached files uname -a > uname-a.log cat /proc/version_signature > version.log dmesg > dmesg.log sudo lspci -vvnn > lspci-vvnn.log are generated after booting with a working kernel. -- Gutsy hangs at boot with COMRESET failed error (kernel 2.6.22-13 and 2.6.22-14) https://bugs.launchpad.net/bugs/150259 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From Johan.Eneland at telia.com Mon Jan 14 07:47:03 2008 From: Johan.Eneland at telia.com (JoE) Date: Mon, 14 Jan 2008 07:47:03 -0000 Subject: [Bug 150259] Re: Gutsy hangs at boot with COMRESET failed error (kernel 2.6.22-13 and 2.6.22-14) References: <20071007165823.15222.92545.malonedeb@gandwana.ubuntu.com> Message-ID: <20080114074703.31560.54533.malone@gangotri.ubuntu.com> the files ** Attachment added: "se previous comment text" http://launchpadlibrarian.net/11324019/Bug150259.logs.tar.gz -- Gutsy hangs at boot with COMRESET failed error (kernel 2.6.22-13 and 2.6.22-14) https://bugs.launchpad.net/bugs/150259 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From Johan.Eneland at telia.com Mon Jan 14 07:48:19 2008 From: Johan.Eneland at telia.com (JoE) Date: Mon, 14 Jan 2008 07:48:19 -0000 Subject: [Bug 150259] Re: Gutsy hangs at boot with COMRESET failed error (kernel 2.6.22-13 and 2.6.22-14) References: <20071007165823.15222.92545.malonedeb@gandwana.ubuntu.com> Message-ID: <20080114074819.12618.5645.malone@potassium.ubuntu.com> ** Attachment added: "dmesg.log" http://launchpadlibrarian.net/11324023/dmesg.log -- Gutsy hangs at boot with COMRESET failed error (kernel 2.6.22-13 and 2.6.22-14) https://bugs.launchpad.net/bugs/150259 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From Johan.Eneland at telia.com Mon Jan 14 07:49:54 2008 From: Johan.Eneland at telia.com (JoE) Date: Mon, 14 Jan 2008 07:49:54 -0000 Subject: [Bug 150259] Re: Gutsy hangs at boot with COMRESET failed error (kernel 2.6.22-13 and 2.6.22-14) References: <20071007165823.15222.92545.malonedeb@gandwana.ubuntu.com> Message-ID: <20080114074954.24811.32281.malone@gandwana.ubuntu.com> lspci-vvnn.log ** Attachment added: "lspci-vvnn.log" http://launchpadlibrarian.net/11324030/lspci-vvnn.log -- Gutsy hangs at boot with COMRESET failed error (kernel 2.6.22-13 and 2.6.22-14) https://bugs.launchpad.net/bugs/150259 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From Johan.Eneland at telia.com Mon Jan 14 07:50:27 2008 From: Johan.Eneland at telia.com (JoE) Date: Mon, 14 Jan 2008 07:50:27 -0000 Subject: [Bug 150259] Re: Gutsy hangs at boot with COMRESET failed error (kernel 2.6.22-13 and 2.6.22-14) References: <20071007165823.15222.92545.malonedeb@gandwana.ubuntu.com> Message-ID: <20080114075027.31718.77849.malone@gangotri.ubuntu.com> ** Attachment added: "uname-a.log" http://launchpadlibrarian.net/11324031/uname-a.log -- Gutsy hangs at boot with COMRESET failed error (kernel 2.6.22-13 and 2.6.22-14) https://bugs.launchpad.net/bugs/150259 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From Johan.Eneland at telia.com Mon Jan 14 07:52:04 2008 From: Johan.Eneland at telia.com (JoE) Date: Mon, 14 Jan 2008 07:52:04 -0000 Subject: [Bug 150259] Re: Gutsy hangs at boot with COMRESET failed error (kernel 2.6.22-13 and 2.6.22-14) References: <20071007165823.15222.92545.malonedeb@gandwana.ubuntu.com> Message-ID: <20080114075205.12484.89780.malone@potassium.ubuntu.com> I had some trouble to send the attached files but here is the last of them ** Attachment added: "versio.log" http://launchpadlibrarian.net/11324033/version.log -- Gutsy hangs at boot with COMRESET failed error (kernel 2.6.22-13 and 2.6.22-14) https://bugs.launchpad.net/bugs/150259 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From web.jdm at gmail.com Mon Jan 14 09:50:42 2008 From: web.jdm at gmail.com (web.jdm) Date: Mon, 14 Jan 2008 09:50:42 -0000 Subject: [Bug 182792] [Hardy] System freeze when I modprobe ndiswrapper References: <20080114095042.31560.30011.malonedeb@gangotri.ubuntu.com> Message-ID: <20080114095042.31560.30011.malonedeb@gangotri.ubuntu.com> Public bug reported: Hi I'm testing hardy livecd with the kernel 2.6.24-3-generic. I need ndiswrapper for Internet. When i take : sudo modprobe ndiswrapper (Killed) and my computer freeze. No problem with Gutsy Regards ** Affects: ndiswrapper (Ubuntu) Importance: Undecided Status: New -- [Hardy] System freeze when I modprobe ndiswrapper https://bugs.launchpad.net/bugs/182792 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From web.jdm at gmail.com Mon Jan 14 10:10:08 2008 From: web.jdm at gmail.com (web.jdm) Date: Mon, 14 Jan 2008 10:10:08 -0000 Subject: [Bug 182792] Re: [Hardy] System freeze when I modprobe ndiswrapper References: <20080114095042.31560.30011.malonedeb@gangotri.ubuntu.com> Message-ID: <20080114101008.31718.73846.malone@gangotri.ubuntu.com> It work when I've compiled ndiswrapper from the site. -- [Hardy] System freeze when I modprobe ndiswrapper https://bugs.launchpad.net/bugs/182792 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From steven at nchc.org.tw Mon Jan 14 13:20:06 2008 From: steven at nchc.org.tw (steven_shiau) Date: Mon, 14 Jan 2008 13:20:06 -0000 Subject: [Bug 182765] Re: kernel BUG at /build/buildd/linux-2.6.24/fs/attr.c:138! References: <20080114045447.31560.56820.malonedeb@gangotri.ubuntu.com> Message-ID: <20080114132006.31560.67457.malone@gangotri.ubuntu.com> Well, my coworker Louie Chen found that actually in Hardy alpha 3 (http://cdimage.ubuntu.com/cdimage/releases/hardy/alpha-3/hardy-desktop-i386.iso), same problem exists. The steps to reproduce this problem in Hardy alpha 3: 1. Boot Hardy alpha3 Live CD 2. apt-get --purge remove fuse-utils 3. add "universe" in /etc/apt/sources.list 4. apt-get update 5. apt-get install sshfs Here the results are: ------- root at ubuntu:~# apt-get install sshfs Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: fuse-utils The following NEW packages will be installed: fuse-utils sshfs 0 upgraded, 2 newly installed, 0 to remove and 107 not upgraded. Need to get 54.1kB of archives. After this operation, 274kB of additional disk space will be used. Do you want to continue [Y/n]? Get:1 http://archive.ubuntu.com hardy/main fuse-utils 2.7.1-2ubuntu1 [19.2kB] Get:2 http://archive.ubuntu.com hardy/universe sshfs 1.7-2.1 [34.9kB] Fetched 54.1kB in 2s (18.5kB/s) Selecting previously deselected package fuse-utils. (Reading database ... 94414 files and directories currently installed.) Unpacking fuse-utils (from .../fuse-utils_2.7.1-2ubuntu1_i386.deb) ... Selecting previously deselected package sshfs. Unpacking sshfs (from .../sshfs_1.7-2.1_i386.deb) ... Setting up fuse-utils (2.7.1-2ubuntu1) ... creating fuse group... /var/lib/dpkg/info/fuse-utils.postinst: line 5: 8436 Segmentation fault chown root:fuse /bin/fusermount dpkg: error processing fuse-utils (--configure): subprocess post-installation script returned error exit status 139 dpkg: dependency problems prevent configuration of sshfs: sshfs depends on fuse-utils; however: Package fuse-utils is not configured yet. dpkg: error processing sshfs (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: fuse-utils sshfs E: Sub-process /usr/bin/dpkg returned an error code (1) --------- The kernel Oops exists in the message of dmesg, and it is attached. ** Attachment added: "Kernel Oops" http://launchpadlibrarian.net/11328127/hardy-fuse-kernel-Oops.txt -- kernel BUG at /build/buildd/linux-2.6.24/fs/attr.c:138! https://bugs.launchpad.net/bugs/182765 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From davmor2 at gmail.com Mon Jan 14 16:31:24 2008 From: davmor2 at gmail.com (davmor2) Date: Mon, 14 Jan 2008 16:31:24 -0000 Subject: [Bug 182792] Re: [Hardy] System freeze when I modprobe ndiswrapper References: <20080114095042.31560.30011.malonedeb@gangotri.ubuntu.com> Message-ID: <20080114163124.31718.73779.malone@gangotri.ubuntu.com> I too have system freeze. Also if you reboot the machine once ndiswrapper is in effect you machine hard locks before gdm screen. The install works flawlessly in Gutsy. ** Changed in: ndiswrapper (Ubuntu) Status: New => Confirmed -- [Hardy] System freeze when I modprobe ndiswrapper https://bugs.launchpad.net/bugs/182792 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From dyerger at stcservices.com Mon Jan 14 18:18:08 2008 From: dyerger at stcservices.com (DavidYerger) Date: Mon, 14 Jan 2008 18:18:08 -0000 Subject: [Bug 34155] Standby (S1) doesn't work either References: <20060308232941.29403.57547.malonedeb@gangotri.ubuntu.com> Message-ID: <20080114181808.24707.57939.malone@gandwana.ubuntu.com> Recently waking up from Standby (S1) gives a screen with a white line, and the area under it eerily gets brighter, kind of like a mood ring... I changed the parameter in gconf to hibernate instead: 1. I get a notification that hibernation failed when it wakes up 2. The external drive doesn't wake up 3. The network adapter didn't wake up last time (/etc/init.d/networking restart didn't help), last one might be related to me having a wireless card in, usually this works -- Suspend-To-Ram (S3) doesn't work on Dell Latitude C640 https://bugs.launchpad.net/bugs/34155 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From tomashnyk at gmail.com Tue Jan 15 01:28:44 2008 From: tomashnyk at gmail.com (TomasHnyk) Date: Tue, 15 Jan 2008 01:28:44 -0000 Subject: [Bug 153341] Re: missing driver for Ricoh sd-card reader (sdricoh_cs.ko) in Ubuntu 7.10 References: <20071016161759.28140.7758.malonedeb@gangotri.ubuntu.com> Message-ID: <20080115012845.12484.84497.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 36964 *** https://bugs.launchpad.net/bugs/36964 ** This bug has been marked a duplicate of bug 36964 [dapper] Asus sd/mmc card reader not working -- missing driver for Ricoh sd-card reader (sdricoh_cs.ko) in Ubuntu 7.10 https://bugs.launchpad.net/bugs/153341 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber (via bug 36964). From tomashnyk at gmail.com Tue Jan 15 01:31:26 2008 From: tomashnyk at gmail.com (TomasHnyk) Date: Tue, 15 Jan 2008 01:31:26 -0000 Subject: [Bug 36964] Re: [dapper] Asus sd/mmc card reader not working References: <20060328082753.6253.5275.malonedeb@gandwana.ubuntu.com> Message-ID: <20080115013127.31718.32997.malone@gangotri.ubuntu.com> fcolcord: 153341 is a duplicate, I am marking as such. I am also changing the target package to linux as in the duplicate bug (reasoning: linux is developement kernel, 22 is stable now and this is no candidate for backporting) ** Changed in: linux (Ubuntu) Sourcepackagename: linux-source-2.6.22 => linux -- [dapper] Asus sd/mmc card reader not working https://bugs.launchpad.net/bugs/36964 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From richw at richw.org Tue Jan 15 07:27:54 2008 From: richw at richw.org (Rich Wales) Date: Tue, 15 Jan 2008 07:27:54 -0000 Subject: [Bug 156600] Re: Crash at kernel initialization when booting Xen on AMD Athlon X2 References: <20071024083530.24713.64654.malonedeb@gangotri.ubuntu.com> Message-ID: <20080115072754.12484.31834.malone@potassium.ubuntu.com> I'm seeing this same bug on my Xen system (same versions of xen- hypervisor-3.1 and linux-image-2.6.22-14-xen). In my case, the system generally comes up, but domU's and/or the dom0 will crash sporadically with a kernel bug at the location described in the original report. I'm seeing two other problems (possibly related). If I try to copy (scp) a large file onto my dom0, or any of the domU's, the resulting copy of the file is corrupt. And I'm getting ext3fs problems -- sometimes errors causing a filesystem to remount as read-only, and sometimes crashes during fsck while rebooting. This has become serious enough that I'm going to have to abandon my plans to bring up a production Xen cluster on this box until / unless the problem can be fixed. I reported this problem on the xen-users list, but no one there had any ideas. I found an earlier posting to xen-users (from November 2007), describing this same problem, with the subject "Crashing PV DomU, Can't find the reason". -- Crash at kernel initialization when booting Xen on AMD Athlon X2 https://bugs.launchpad.net/bugs/156600 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From richw at richw.org Tue Jan 15 07:53:44 2008 From: richw at richw.org (Rich Wales) Date: Tue, 15 Jan 2008 07:53:44 -0000 Subject: [Bug 156600] Re: Crash at kernel initialization when booting Xen on AMD Athlon X2 References: <20071024083530.24713.64654.malonedeb@gangotri.ubuntu.com> Message-ID: <20080115075344.30605.54703.malone@gandwana.ubuntu.com> I should probably have mentioned that my hardware is an Athlon XP 2700+. So the bug is evidently not specific to the Athlon X2. -- Crash at kernel initialization when booting Xen on AMD Athlon X2 https://bugs.launchpad.net/bugs/156600 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From bishi.ubuntu at free.fr Tue Jan 15 08:36:18 2008 From: bishi.ubuntu at free.fr (Bishiboosh) Date: Tue, 15 Jan 2008 08:36:18 -0000 Subject: [Bug 36964] Re: [dapper] Asus sd/mmc card reader not working References: <20060328082753.6253.5275.malonedeb@gandwana.ubuntu.com> Message-ID: <20080115083619.30605.71007.malone@gandwana.ubuntu.com> Just download the tar.gz, unpack it somewhere, and follow the instructions in the README file (do a make and make install). Make sure you have the linux-yourkernel-header installed. Worked properly for me :) -- [dapper] Asus sd/mmc card reader not working https://bugs.launchpad.net/bugs/36964 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From launchpad.net at rolf.leggewie.biz Tue Jan 15 10:49:01 2008 From: launchpad.net at rolf.leggewie.biz (Rolf Leggewie) Date: Tue, 15 Jan 2008 10:49:01 -0000 Subject: [Bug 50431] Re: cpu scaling for VIA CPUs does not work References: <20060620085438.7542.21431.malonedeb@gandwana.ubuntu.com> Message-ID: <20080115104901.31560.18802.malone@gangotri.ubuntu.com> I booted 2.6.22-14-386 and the situation does not look much different. [ 1976.816575] longhaul: VIA C3 'Samuel' [C5A] CPU detected. Longhaul v1 supported. [ 1976.816696] longhaul: No ACPI support. Unsupported northbridge. [ 1977.151587] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm [ 1977.153383] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance [ 1977.156132] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance [ 1977.158009] acpi_cpufreq: Unknown symbol acpi_processor_register_performance ** Attachment added: "uname-a.log" http://launchpadlibrarian.net/11349863/uname-a.log -- cpu scaling for VIA CPUs does not work https://bugs.launchpad.net/bugs/50431 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From launchpad.net at rolf.leggewie.biz Tue Jan 15 10:50:02 2008 From: launchpad.net at rolf.leggewie.biz (Rolf Leggewie) Date: Tue, 15 Jan 2008 10:50:02 -0000 Subject: [Bug 50431] Re: cpu scaling for VIA CPUs does not work References: <20060620085438.7542.21431.malonedeb@gandwana.ubuntu.com> Message-ID: <20080115105002.31050.19082.malone@gandwana.ubuntu.com> ** Attachment added: "version.log" http://launchpadlibrarian.net/11349883/version.log -- cpu scaling for VIA CPUs does not work https://bugs.launchpad.net/bugs/50431 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From launchpad.net at rolf.leggewie.biz Tue Jan 15 10:50:24 2008 From: launchpad.net at rolf.leggewie.biz (Rolf Leggewie) Date: Tue, 15 Jan 2008 10:50:24 -0000 Subject: [Bug 50431] Re: cpu scaling for VIA CPUs does not work References: <20060620085438.7542.21431.malonedeb@gandwana.ubuntu.com> Message-ID: <20080115105024.31718.3584.malone@gangotri.ubuntu.com> ** Attachment added: "dmesg.log" http://launchpadlibrarian.net/11349896/dmesg.log ** Also affects: linux-source-2.6.22 (Ubuntu) Importance: Undecided Status: New ** Changed in: linux-source-2.6.20 (Ubuntu) Status: Incomplete => New -- cpu scaling for VIA CPUs does not work https://bugs.launchpad.net/bugs/50431 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From launchpad.net at rolf.leggewie.biz Tue Jan 15 10:53:15 2008 From: launchpad.net at rolf.leggewie.biz (Rolf Leggewie) Date: Tue, 15 Jan 2008 10:53:15 -0000 Subject: [Bug 50431] Re: cpu scaling for VIA CPUs does not work References: <20060620085438.7542.21431.malonedeb@gandwana.ubuntu.com> Message-ID: <20080115105315.31560.76173.malone@gangotri.ubuntu.com> ** Attachment added: "lspci-vvnn.log" http://launchpadlibrarian.net/11349935/lspci-vvnn.log -- cpu scaling for VIA CPUs does not work https://bugs.launchpad.net/bugs/50431 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From wouterstomp at yahoo.com Tue Jan 15 12:06:29 2008 From: wouterstomp at yahoo.com (Wouter Stomp) Date: Tue, 15 Jan 2008 12:06:29 -0000 Subject: [Bug 133110] Re: Merge with Debian References: <20070817090627.31840.81087.malonedeb@gandwana.ubuntu.com> Message-ID: <20080115120629.28160.72121.malone@gangotri.ubuntu.com> ndiswrapper (1.50-1ubuntu1) hardy; urgency=low * Merge with Debian; remaining changes: - Build for lpia. - debian/control: + Update description to point out that the kernel source package is not required with the standard Ubuntu kernel. + Change the Maintainer address. - debian/control: + Drop ndiswrapper-source. ** Changed in: ndiswrapper (Ubuntu) Status: Confirmed => Fix Released -- Merge with Debian https://bugs.launchpad.net/bugs/133110 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From harry at ijscoboer.nl Tue Jan 15 13:08:41 2008 From: harry at ijscoboer.nl (harrydb) Date: Tue, 15 Jan 2008 13:08:41 -0000 Subject: [Bug 183174] Re: Tickless idle not working on AMD Turion 64 X2 (inspiron laptop) References: <20080115130751.30605.85385.malonedeb@gandwana.ubuntu.com> Message-ID: <20080115130841.30605.89224.malone@gandwana.ubuntu.com> ** Attachment added: "timer_list" http://launchpadlibrarian.net/11353241/timer_list -- Tickless idle not working on AMD Turion 64 X2 (inspiron laptop) https://bugs.launchpad.net/bugs/183174 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From harry at ijscoboer.nl Tue Jan 15 13:08:22 2008 From: harry at ijscoboer.nl (harrydb) Date: Tue, 15 Jan 2008 13:08:22 -0000 Subject: [Bug 183174] Re: Tickless idle not working on AMD Turion 64 X2 (inspiron laptop) References: <20080115130751.30605.85385.malonedeb@gandwana.ubuntu.com> Message-ID: <20080115130822.30605.12615.malone@gandwana.ubuntu.com> ** Attachment added: "kern.log" http://launchpadlibrarian.net/11353238/kern.log -- Tickless idle not working on AMD Turion 64 X2 (inspiron laptop) https://bugs.launchpad.net/bugs/183174 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From harry at ijscoboer.nl Tue Jan 15 13:07:51 2008 From: harry at ijscoboer.nl (harrydb) Date: Tue, 15 Jan 2008 13:07:51 -0000 Subject: [Bug 183174] Tickless idle not working on AMD Turion 64 X2 (inspiron laptop) References: <20080115130751.30605.85385.malonedeb@gandwana.ubuntu.com> Message-ID: <20080115130751.30605.85385.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image When booting a standard ubuntu kernels for hardy alpha (same for gutsy btw), tickless idle is not working. Attached kern.log contains multiple lines that sound suspicious, but I can't figure out which is responsible. I will also attach /proc/timer_list. Kernel is 2.6.24-4, it occurs for both x86 and x86_64 versions. If there is anything I can do to help find the cause, I'll be happy to do so. Thanks in advance, Harry ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- Tickless idle not working on AMD Turion 64 X2 (inspiron laptop) https://bugs.launchpad.net/bugs/183174 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From harry at ijscoboer.nl Tue Jan 15 13:13:59 2008 From: harry at ijscoboer.nl (harrydb) Date: Tue, 15 Jan 2008 13:13:59 -0000 Subject: [Bug 183174] Re: Tickless idle not working on AMD Turion 64 X2 (inspiron laptop) References: <20080115130751.30605.85385.malonedeb@gandwana.ubuntu.com> Message-ID: <20080115131359.12484.71302.launchpad@potassium.ubuntu.com> ** Description changed: Binary package hint: linux-image When booting a standard ubuntu kernels for hardy alpha (same for gutsy btw), tickless idle is not working. Attached kern.log contains multiple lines that sound suspicious, but I can't figure out which is - responsible. I will also attach /proc/timer_list . + responsible. I will also attach /proc/timer_list. Kernel is 2.6.24-4, it + occurs for both x86 and x86_64 versions. - Harry + If there is anything I can do to help find the cause, I'll be happy to do so. + Thanks in advance, Harry -- Tickless idle not working on AMD Turion 64 X2 (inspiron laptop) https://bugs.launchpad.net/bugs/183174 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From harry at ijscoboer.nl Tue Jan 15 13:19:54 2008 From: harry at ijscoboer.nl (harrydb) Date: Tue, 15 Jan 2008 13:19:54 -0000 Subject: [Bug 183174] Re: Tickless idle not working on AMD Turion 64 X2 (inspiron laptop) References: <20080115130751.30605.85385.malonedeb@gandwana.ubuntu.com> Message-ID: <20080115131954.12618.17827.launchpad@potassium.ubuntu.com> ** Description changed: Binary package hint: linux-image When booting a standard ubuntu kernels for hardy alpha (same for gutsy btw), tickless idle is not working. Attached kern.log contains multiple lines that sound suspicious, but I can't figure out which is - responsible. I will also attach /proc/timer_list. Kernel is 2.6.24-4, it + responsible. I will also attach /proc/timer_list. Kernel is 2.6.24-3, it occurs for both x86 and x86_64 versions. If there is anything I can do to help find the cause, I'll be happy to do so. Thanks in advance, Harry -- Tickless idle not working on AMD Turion 64 X2 (inspiron laptop) https://bugs.launchpad.net/bugs/183174 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From launchpad.net at rolf.leggewie.biz Tue Jan 15 13:51:03 2008 From: launchpad.net at rolf.leggewie.biz (Rolf Leggewie) Date: Tue, 15 Jan 2008 13:51:03 -0000 Subject: [Bug 119940] Re: /proc/cpuinfo reports incorrect information for Via C3 References: <20070611220540.16709.9955.malonedeb@gangotri.ubuntu.com> Message-ID: <20080115135103.31050.6925.malone@gandwana.ubuntu.com> still the same on gutsy 2.6.22-14-386 ** Also affects: linux-source-2.6.22 (Ubuntu) Importance: Undecided Status: New -- /proc/cpuinfo reports incorrect information for Via C3 https://bugs.launchpad.net/bugs/119940 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From zavman at gmail.com Tue Jan 15 14:13:08 2008 From: zavman at gmail.com (ilias) Date: Tue, 15 Jan 2008 14:13:08 -0000 Subject: [Bug 41095] Re: MP-BIOS bug : 8254 timer not connected to IO-APIC References: <20060424130132.13104.12309.malonedeb@gandwana.ubuntu.com> Message-ID: <20080115141308.12484.26003.malone@potassium.ubuntu.com> *** This bug is a duplicate of bug 38263 *** https://bugs.launchpad.net/bugs/38263 I had also this problem. The system was just hanging. I used the noapic kernel parameter to bypass this error at boot time, but then the system continued to crash. So, I disabled the cpufreq service and that's it! It now works fine with full acpi support. -- MP-BIOS bug : 8254 timer not connected to IO-APIC https://bugs.launchpad.net/bugs/41095 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From bjoern at boschman.de Tue Jan 15 17:19:30 2008 From: bjoern at boschman.de (jessy) Date: Tue, 15 Jan 2008 17:19:30 -0000 Subject: [Bug 37452] Re: fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100, Dell SASR5/i) References: <20060331083135.5415.666.malonedeb@gangotri.ubuntu.com> Message-ID: <20080115171931.12484.78923.malone@potassium.ubuntu.com> Hi Dave, unfortunatelly there is still no universal solution for dapper. I'm not sure about the timeframe for 6.06.2 but in that release there might be a solution as long as the backported modules will go _into_ the installer kernel as well as _into_ the linux-image that is going to be installed. -- fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100, Dell SASR5/i) https://bugs.launchpad.net/bugs/37452 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From kabus.ingo+launchpad at gmail.com Tue Jan 15 22:14:31 2008 From: kabus.ingo+launchpad at gmail.com (Ing0R) Date: Tue, 15 Jan 2008 22:14:31 -0000 Subject: [Bug 183349] package linux-image-generic 2.6.24.4.4 failed to install/upgrade: dependency problems - leaving unconfigured References: <20080115221431.30605.29448.malonedeb@gandwana.ubuntu.com> Message-ID: <20080115221431.30605.29448.malonedeb@gandwana.ubuntu.com> Public bug reported: The following dist-upgrade was done: ingo at tp64:~/.aMule$ sudo apt-get dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following NEW packages will be installed: brasero gnome-vfs-obexftp libavahi-ui0 libgtk-vnc-1.0-0 libopenobex1 linux-headers-2.6.24-4 linux-headers-2.6.24-4-generic linux-image-2.6.24-4-generic linux-restricted-modules-2.6.24-4-generic linux-ubuntu-modules-2.6.24-4-generic transmission-common transmission-gtk vinagre The following packages have been kept back: openoffice.org-common openoffice.org-style-human The following packages will be upgraded: avahi-autoipd avahi-daemon bluez-gnome cdparanoia cpp-4.2 deskbar-applet discover1-data dpkg dpkg-dev dvd+rw-tools evolution evolution-common evolution-data-server evolution-data-server-common evolution-plugins g++-4.2 gcc-4.2 gcc-4.2-base gdb gnome-about gnome-desktop-data gnome-keyring gnome-menus gnome-volume-manager gtkhtml3.14 gucharmap hpijs hplip hplip-data lib32gcc1 lib32stdc++6 libaprutil1 libavahi-client3 libavahi-common-data libavahi-common3 libavahi-compat-libdnssd1 libavahi-core5 libavahi-glib1 libavahi-qt3-1 libcamel1.2-10 libcdparanoia0 libebook1.2-9 libecal1.2-7 libedata-book1.2-2 libedata-cal1.2-6 libedataserver1.2-9 libedataserverui1.2-8 libegroupwise1.2-13 libexchange-storage1.2-3 libffi4 libgcc1 libgdata-google1.2-1 libgdata1.2-1 libglib2.0-0 libgnome-desktop-2 libgnome-keyring0 libgnome-menu2 libgnomeui-0 libgnomeui-common libgomp1 libgtkhtml3.14-19 libgucharmap6 libpam-gnome-keyring libstdc++6 libstdc++6-4.2-dev linux-generic linux-headers-generic linux-image-generic linux-libc-dev linux-restricted-modules-generic linux-source linux-source-2.6.24 python-gmenu strace ubuntu-desktop ubuntu-minimal ubuntu-standard xkb-data 78 upgraded, 13 newly installed, 0 to remove and 2 not upgraded. 1 not fully installed or removed. Need to get 135MB of archives. After this operation, 207MB of additional disk space will be used. Do you want to continue [Y/n]? Get:1 http://de.archive.ubuntu.com hardy/main libglib2.0-0 2.15.2-0ubuntu1 [803kB] Get:2 http://de.archive.ubuntu.com hardy/main dpkg 1.14.15ubuntu1 [2342kB] Get:3 http://de.archive.ubuntu.com hardy/main hplip 2.7.12-0ubuntu1 [313kB] Get:4 http://de.archive.ubuntu.com hardy/main hplip-data 2.7.12-0ubuntu1 [7005kB] Get:5 http://de.archive.ubuntu.com hardy/main linux-image-2.6.24-4-generic 2.6.24-4.7 [19.1MB] Get:6 http://de.archive.ubuntu.com hardy/main linux-ubuntu-modules-2.6.24-4-generic 2.6.24-4.8 [2416kB] Get:7 http://de.archive.ubuntu.com hardy/main libgomp1 4.2.2-6ubuntu1 [14.1kB] Get:8 http://de.archive.ubuntu.com hardy/main gcc-4.2-base 4.2.2-6ubuntu1 [105kB] Get:9 http://de.archive.ubuntu.com hardy/main libstdc++6 4.2.2-6ubuntu1 [331kB] Get:10 http://de.archive.ubuntu.com hardy/main lib32stdc++6 4.2.2-6ubuntu1 [332kB] Get:11 http://de.archive.ubuntu.com hardy/main cpp-4.2 4.2.2-6ubuntu1 [2713kB] Get:12 http://de.archive.ubuntu.com hardy/main gcc-4.2 4.2.2-6ubuntu1 [611kB] Get:13 http://de.archive.ubuntu.com hardy/main g++-4.2 4.2.2-6ubuntu1 [3034kB] Get:14 http://de.archive.ubuntu.com hardy/main libstdc++6-4.2-dev 4.2.2-6ubuntu1 [1218kB] Get:15 http://de.archive.ubuntu.com hardy/main lib32gcc1 1:4.2.2-6ubuntu1 [23.3kB] Get:16 http://de.archive.ubuntu.com hardy/main libffi4 4.2.2-6ubuntu1 [16.4kB] Get:17 http://de.archive.ubuntu.com hardy/main libgcc1 1:4.2.2-6ubuntu1 [27.5kB] Get:18 http://de.archive.ubuntu.com hardy/main ubuntu-minimal 1.87 [23.6kB] Get:19 http://de.archive.ubuntu.com hardy/main xkb-data 1.1~cvs.20080104.1-1ubuntu1 [338kB] Get:20 http://de.archive.ubuntu.com hardy/main strace 4.5.15-1.1ubuntu1 [111kB] Get:21 http://de.archive.ubuntu.com hardy/main ubuntu-standard 1.87 [23.4kB] Get:22 http://de.archive.ubuntu.com hardy/main avahi-autoipd 0.6.22-2ubuntu1 [47.3kB] Get:23 http://de.archive.ubuntu.com hardy/main libavahi-common-data 0.6.22-2ubuntu1 [29.3kB] Get:24 http://de.archive.ubuntu.com hardy/main libavahi-common3 0.6.22-2ubuntu1 [25.4kB] Get:25 http://de.archive.ubuntu.com hardy/main libavahi-core5 0.6.22-2ubuntu1 [119kB] Get:26 http://de.archive.ubuntu.com hardy/main avahi-daemon 0.6.22-2ubuntu1 [67.9kB] Get:27 http://de.archive.ubuntu.com hardy/main libopenobex1 1.3-3ubuntu1 [22.6kB] Get:28 http://de.archive.ubuntu.com hardy/main gnome-vfs-obexftp 0.4-1 [52.6kB] Get:29 http://de.archive.ubuntu.com hardy/main bluez-gnome 0.15-0ubuntu1 [106kB] Get:30 http://de.archive.ubuntu.com hardy/main libgnome-keyring0 2.21.5-0ubuntu1 [31.3kB] Get:31 http://de.archive.ubuntu.com hardy/main gnome-keyring 2.21.5-0ubuntu1 [280kB] Get:32 http://de.archive.ubuntu.com hardy/main libgnomeui-0 2.21.5-0ubuntu1 [297kB] Get:33 http://de.archive.ubuntu.com hardy/main libgnomeui-common 2.21.5-0ubuntu1 [21.2kB] Get:34 http://de.archive.ubuntu.com hardy/main brasero 0.7.0-0ubuntu1 [723kB] Get:35 http://de.archive.ubuntu.com hardy/main libcdparanoia0 3.10+debian~pre0-6 [63.5kB] Get:36 http://de.archive.ubuntu.com hardy/main cdparanoia 3.10+debian~pre0-6 [42.9kB] Get:37 http://de.archive.ubuntu.com hardy/main libedataserver1.2-9 2.21.5-0ubuntu1 [117kB] Get:38 http://de.archive.ubuntu.com hardy/main libcamel1.2-10 2.21.5-0ubuntu1 [344kB] Get:39 http://de.archive.ubuntu.com hardy/main libebook1.2-9 2.21.5-0ubuntu1 [93.0kB] Get:40 http://de.archive.ubuntu.com hardy/main libgnome-desktop-2 1:2.21.5-0ubuntu1 [81.2kB] Get:41 http://de.archive.ubuntu.com hardy/main deskbar-applet 2.21.5-0ubuntu1 [301kB] Get:42 http://de.archive.ubuntu.com hardy/main discover1-data 2.2008.01.12 [142kB] Get:43 http://de.archive.ubuntu.com hardy/main dpkg-dev 1.14.15ubuntu1 [526kB] Get:44 http://de.archive.ubuntu.com hardy/main dvd+rw-tools 7.0-9 [152kB] Get:45 http://de.archive.ubuntu.com hardy/main evolution-data-server 2.21.5-0ubuntu1 [461kB] Get:46 http://de.archive.ubuntu.com hardy/main evolution-data-server-common 2.21.5-0ubuntu1 [66.7kB] Get:47 http://de.archive.ubuntu.com hardy/main libecal1.2-7 2.21.5-0ubuntu1 [280kB] Get:48 http://de.archive.ubuntu.com hardy/main libedata-book1.2-2 2.21.5-0ubuntu1 [57.1kB] Get:49 http://de.archive.ubuntu.com hardy/main libedata-cal1.2-6 2.21.5-0ubuntu1 [70.3kB] Get:50 http://de.archive.ubuntu.com hardy/main libegroupwise1.2-13 2.21.5-0ubuntu1 [102kB] Get:51 http://de.archive.ubuntu.com hardy/main libgdata1.2-1 2.21.5-0ubuntu1 [54.7kB] Get:52 http://de.archive.ubuntu.com hardy/main libgdata-google1.2-1 2.21.5-0ubuntu1 [13.4kB] Get:53 http://de.archive.ubuntu.com hardy/main evolution 2.21.5-0ubuntu1 [2819kB] Get:54 http://de.archive.ubuntu.com hardy/main evolution-common 2.21.5-0ubuntu1 [11.1MB] Get:55 http://de.archive.ubuntu.com hardy/main libgtkhtml3.14-19 3.17.5-0ubuntu1 [350kB] Get:56 http://de.archive.ubuntu.com hardy/main gtkhtml3.14 3.17.5-0ubuntu1 [143kB] Get:57 http://de.archive.ubuntu.com hardy/main libedataserverui1.2-8 2.21.5-0ubuntu1 [83.7kB] Get:58 http://de.archive.ubuntu.com hardy/main libexchange-storage1.2-3 2.21.5-0ubuntu1 [136kB] Get:59 http://de.archive.ubuntu.com hardy/main evolution-plugins 2.21.5-0ubuntu1 [84.9kB] Get:60 http://de.archive.ubuntu.com hardy/main gdb 6.7.1-2ubuntu1 [2952kB] Get:61 http://de.archive.ubuntu.com hardy/main gnome-about 1:2.21.5-0ubuntu1 [189kB] Get:62 http://de.archive.ubuntu.com hardy/main gnome-desktop-data 1:2.21.5-0ubuntu1 [571kB] Get:63 http://de.archive.ubuntu.com hardy/main libgnome-menu2 2.21.5-0ubuntu1 [54.3kB] Get:64 http://de.archive.ubuntu.com hardy/main gnome-menus 2.21.5-0ubuntu1 [57.5kB] Get:65 http://de.archive.ubuntu.com hardy/main python-gmenu 2.21.5-0ubuntu1 [20.7kB] Get:66 http://de.archive.ubuntu.com hardy/main gnome-volume-manager 2.22.0-1ubuntu2 [168kB] Get:67 http://de.archive.ubuntu.com hardy/main gucharmap 1:2.21.5-0ubuntu1 [704kB] Get:68 http://de.archive.ubuntu.com hardy/main libgucharmap6 1:2.21.5-0ubuntu1 [1223kB] Get:69 http://de.archive.ubuntu.com hardy/main hpijs 2.7.12+2.7.12-0ubuntu1 [355kB] Get:70 http://de.archive.ubuntu.com hardy/main libaprutil1 1.2.12+dfsg-2 [76.3kB] Get:71 http://de.archive.ubuntu.com hardy/main libavahi-client3 0.6.22-2ubuntu1 [52.1kB] Get:72 http://de.archive.ubuntu.com hardy/main libavahi-compat-libdnssd1 0.6.22-2ubuntu1 [18.3kB] Get:73 http://de.archive.ubuntu.com hardy/main libavahi-glib1 0.6.22-2ubuntu1 [30.6kB] Get:74 http://de.archive.ubuntu.com hardy/main libavahi-qt3-1 0.6.22-2ubuntu1 [33.3kB] Get:75 http://de.archive.ubuntu.com hardy/main libavahi-ui0 0.6.22-2ubuntu1 [27.6kB] Get:76 http://de.archive.ubuntu.com hardy/universe libgtk-vnc-1.0-0 0.3.2-1ubuntu2 [37.1kB] Get:77 http://de.archive.ubuntu.com hardy/main libpam-gnome-keyring 2.21.5-0ubuntu1 [25.7kB] Get:78 http://de.archive.ubuntu.com hardy/restricted linux-generic 2.6.24.4.4 [25.7kB] Get:79 http://de.archive.ubuntu.com hardy/main linux-image-generic 2.6.24.4.4 [25.7kB] Get:80 http://de.archive.ubuntu.com hardy/restricted linux-restricted-modules-2.6.24-4-generic 2.6.24.4-4.11 [10.7MB] Get:81 http://de.archive.ubuntu.com hardy/restricted linux-restricted-modules-generic 2.6.24.4.4 [25.7kB] Get:82 http://de.archive.ubuntu.com hardy/main linux-headers-2.6.24-4 2.6.24-4.7 [8071kB] Get:83 http://de.archive.ubuntu.com hardy/main linux-headers-2.6.24-4-generic 2.6.24-4.7 [644kB] Get:84 http://de.archive.ubuntu.com hardy/main linux-headers-generic 2.6.24.4.4 [25.7kB] Get:85 http://de.archive.ubuntu.com hardy/main linux-libc-dev 2.6.24-4.7 [666kB] Get:86 http://de.archive.ubuntu.com hardy/main linux-source-2.6.24 2.6.24-4.7 [47.4MB] Get:87 http://de.archive.ubuntu.com hardy/main linux-source 2.6.24.4.4 [25.7kB] Get:88 http://de.archive.ubuntu.com hardy/main transmission-common 1.00-1 [12.4kB] Get:89 http://de.archive.ubuntu.com hardy/main transmission-gtk 1.00-1 [309kB] Get:90 http://de.archive.ubuntu.com hardy/main ubuntu-desktop 1.87 [24.5kB] Get:91 http://de.archive.ubuntu.com hardy/main vinagre 0.3-0ubuntu2 [37.5kB] Fetched 135MB in 9min53s (227kB/s) Extracting templates from packages: 100% (Reading database ... 112887 files and directories currently installed.) Preparing to replace libglib2.0-0 2.15.1-0ubuntu1 (using .../libglib2.0-0_2.15.2-0ubuntu1_amd64.deb) ... Unpacking replacement libglib2.0-0 ... Preparing to replace dpkg 1.14.12ubuntu4 (using .../dpkg_1.14.15ubuntu1_amd64.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.14.15ubuntu1) ... (Reading database ... 112888 files and directories currently installed.) Preparing to replace hplip 2.7.10-5ubuntu2 (using .../hplip_2.7.12-0ubuntu1_amd64.deb) ... Unpacking replacement hplip ... Preparing to replace hplip-data 2.7.10-5ubuntu2 (using .../hplip-data_2.7.12-0ubuntu1_all.deb) ... Unpacking replacement hplip-data ... Selecting previously deselected package linux-image-2.6.24-4-generic. Unpacking linux-image-2.6.24-4-generic (from .../linux-image-2.6.24-4-generic_2.6.24-4.7_amd64.deb) ... Done. Selecting previously deselected package linux-ubuntu-modules-2.6.24-4-generic. Unpacking linux-ubuntu-modules-2.6.24-4-generic (from .../linux-ubuntu-modules-2.6.24-4-generic_2.6.24-4.8_amd64.deb) ... Preparing to replace libgomp1 4.2.2-5ubuntu2 (using .../libgomp1_4.2.2-6ubuntu1_amd64.deb) ... Unpacking replacement libgomp1 ... Preparing to replace gcc-4.2-base 4.2.2-5ubuntu2 (using .../gcc-4.2-base_4.2.2-6ubuntu1_amd64.deb) ... Unpacking replacement gcc-4.2-base ... Setting up gcc-4.2-base (4.2.2-6ubuntu1) ... (Reading database ... 115309 files and directories currently installed.) Preparing to replace libstdc++6 4.2.2-5ubuntu2 (using .../libstdc++6_4.2.2-6ubuntu1_amd64.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.2.2-6ubuntu1) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place (Reading database ... 115309 files and directories currently installed.) Preparing to replace lib32stdc++6 4.2.2-5ubuntu2 (using .../lib32stdc++6_4.2.2-6ubuntu1_amd64.deb) ... Unpacking replacement lib32stdc++6 ... Preparing to replace cpp-4.2 4.2.2-5ubuntu2 (using .../cpp-4.2_4.2.2-6ubuntu1_amd64.deb) ... Unpacking replacement cpp-4.2 ... Preparing to replace gcc-4.2 4.2.2-5ubuntu2 (using .../gcc-4.2_4.2.2-6ubuntu1_amd64.deb) ... Unpacking replacement gcc-4.2 ... Preparing to replace g++-4.2 4.2.2-5ubuntu2 (using .../g++-4.2_4.2.2-6ubuntu1_amd64.deb) ... Unpacking replacement g++-4.2 ... Preparing to replace libstdc++6-4.2-dev 4.2.2-5ubuntu2 (using .../libstdc++6-4.2-dev_4.2.2-6ubuntu1_amd64.deb) ... Unpacking replacement libstdc++6-4.2-dev ... Preparing to replace lib32gcc1 1:4.2.2-5ubuntu2 (using .../lib32gcc1_1%3a4.2.2-6ubuntu1_amd64.deb) ... Unpacking replacement lib32gcc1 ... Preparing to replace libffi4 4.2.2-5ubuntu2 (using .../libffi4_4.2.2-6ubuntu1_amd64.deb) ... Unpacking replacement libffi4 ... Preparing to replace libgcc1 1:4.2.2-5ubuntu2 (using .../libgcc1_1%3a4.2.2-6ubuntu1_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.2.2-6ubuntu1) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place (Reading database ... 115309 files and directories currently installed.) Preparing to replace ubuntu-minimal 1.86 (using .../ubuntu-minimal_1.87_amd64.deb) ... Unpacking replacement ubuntu-minimal ... Preparing to replace xkb-data 1.0~cvs.20070916-1ubuntu1 (using .../xkb-data_1.1~cvs.20080104.1-1ubuntu1_all.deb) ... Unpacking replacement xkb-data ... Preparing to replace strace 4.5.15-1ubuntu1 (using .../strace_4.5.15-1.1ubuntu1_amd64.deb) ... Unpacking replacement strace ... Preparing to replace ubuntu-standard 1.86 (using .../ubuntu-standard_1.87_amd64.deb) ... Unpacking replacement ubuntu-standard ... Preparing to replace avahi-autoipd 0.6.21-4ubuntu2 (using .../avahi-autoipd_0.6.22-2ubuntu1_amd64.deb) ... Unpacking replacement avahi-autoipd ... Preparing to replace libavahi-common-data 0.6.21-4ubuntu2 (using .../libavahi-common-data_0.6.22-2ubuntu1_amd64.deb) ... Unpacking replacement libavahi-common-data ... Preparing to replace libavahi-common3 0.6.21-4ubuntu2 (using .../libavahi-common3_0.6.22-2ubuntu1_amd64.deb) ... Unpacking replacement libavahi-common3 ... Preparing to replace libavahi-core5 0.6.21-4ubuntu2 (using .../libavahi-core5_0.6.22-2ubuntu1_amd64.deb) ... Unpacking replacement libavahi-core5 ... Preparing to replace avahi-daemon 0.6.21-4ubuntu2 (using .../avahi-daemon_0.6.22-2ubuntu1_amd64.deb) ... * Stopping Avahi mDNS/DNS-SD Daemon avahi-daemon [ OK ] Unpacking replacement avahi-daemon ... Selecting previously deselected package libopenobex1. Unpacking libopenobex1 (from .../libopenobex1_1.3-3ubuntu1_amd64.deb) ... Selecting previously deselected package gnome-vfs-obexftp. Unpacking gnome-vfs-obexftp (from .../gnome-vfs-obexftp_0.4-1_amd64.deb) ... Preparing to replace bluez-gnome 0.14-0ubuntu2 (using .../bluez-gnome_0.15-0ubuntu1_amd64.deb) ... Unpacking replacement bluez-gnome ... Preparing to replace libgnome-keyring0 2.21.4-0ubuntu2 (using .../libgnome-keyring0_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libgnome-keyring0 ... Preparing to replace gnome-keyring 2.21.4-0ubuntu2 (using .../gnome-keyring_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement gnome-keyring ... Preparing to replace libgnomeui-0 2.20.1.1-1 (using .../libgnomeui-0_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libgnomeui-0 ... Preparing to replace libgnomeui-common 2.20.1.1-1 (using .../libgnomeui-common_2.21.5-0ubuntu1_all.deb) ... Unpacking replacement libgnomeui-common ... Selecting previously deselected package brasero. Unpacking brasero (from .../brasero_0.7.0-0ubuntu1_amd64.deb) ... Preparing to replace libcdparanoia0 3.10+debian~pre0-5 (using .../libcdparanoia0_3.10+debian~pre0-6_amd64.deb) ... Unpacking replacement libcdparanoia0 ... Preparing to replace cdparanoia 3.10+debian~pre0-5 (using .../cdparanoia_3.10+debian~pre0-6_amd64.deb) ... Unpacking replacement cdparanoia ... Preparing to replace libedataserver1.2-9 2.21.4-0ubuntu2 (using .../libedataserver1.2-9_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libedataserver1.2-9 ... Preparing to replace libcamel1.2-10 2.21.4-0ubuntu2 (using .../libcamel1.2-10_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libcamel1.2-10 ... Preparing to replace libebook1.2-9 2.21.4-0ubuntu2 (using .../libebook1.2-9_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libebook1.2-9 ... Preparing to replace libgnome-desktop-2 1:2.21.4-0ubuntu1 (using .../libgnome-desktop-2_1%3a2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libgnome-desktop-2 ... Preparing to replace deskbar-applet 2.21.4-0ubuntu1 (using .../deskbar-applet_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement deskbar-applet ... Preparing to replace discover1-data 2.2007.08.07ubuntu1 (using .../discover1-data_2.2008.01.12_all.deb) ... Unpacking replacement discover1-data ... Preparing to replace dpkg-dev 1.14.12ubuntu4 (using .../dpkg-dev_1.14.15ubuntu1_all.deb) ... Unpacking replacement dpkg-dev ... Preparing to replace dvd+rw-tools 7.0-7 (using .../dvd+rw-tools_7.0-9_amd64.deb) ... Unpacking replacement dvd+rw-tools ... Preparing to replace evolution-data-server 2.21.4-0ubuntu2 (using .../evolution-data-server_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement evolution-data-server ... Preparing to replace evolution-data-server-common 2.21.4-0ubuntu2 (using .../evolution-data-server-common_2.21.5-0ubuntu1_all.deb) ... Unpacking replacement evolution-data-server-common ... Preparing to replace libecal1.2-7 2.21.4-0ubuntu2 (using .../libecal1.2-7_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libecal1.2-7 ... Preparing to replace libedata-book1.2-2 2.21.4-0ubuntu2 (using .../libedata-book1.2-2_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libedata-book1.2-2 ... Preparing to replace libedata-cal1.2-6 2.21.4-0ubuntu2 (using .../libedata-cal1.2-6_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libedata-cal1.2-6 ... Preparing to replace libegroupwise1.2-13 2.21.4-0ubuntu2 (using .../libegroupwise1.2-13_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libegroupwise1.2-13 ... Preparing to replace libgdata1.2-1 2.21.4-0ubuntu2 (using .../libgdata1.2-1_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libgdata1.2-1 ... Preparing to replace libgdata-google1.2-1 2.21.4-0ubuntu2 (using .../libgdata-google1.2-1_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libgdata-google1.2-1 ... Preparing to replace evolution 2.21.4-0ubuntu1 (using .../evolution_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement evolution ... Preparing to replace evolution-common 2.21.4-0ubuntu1 (using .../evolution-common_2.21.5-0ubuntu1_all.deb) ... Unpacking replacement evolution-common ... Preparing to replace libgtkhtml3.14-19 3.17.4-0ubuntu1 (using .../libgtkhtml3.14-19_3.17.5-0ubuntu1_amd64.deb) ... Unpacking replacement libgtkhtml3.14-19 ... Preparing to replace gtkhtml3.14 3.17.4-0ubuntu1 (using .../gtkhtml3.14_3.17.5-0ubuntu1_amd64.deb) ... Unpacking replacement gtkhtml3.14 ... Preparing to replace libedataserverui1.2-8 2.21.4-0ubuntu2 (using .../libedataserverui1.2-8_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libedataserverui1.2-8 ... Preparing to replace libexchange-storage1.2-3 2.21.4-0ubuntu2 (using .../libexchange-storage1.2-3_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libexchange-storage1.2-3 ... Preparing to replace evolution-plugins 2.21.4-0ubuntu1 (using .../evolution-plugins_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement evolution-plugins ... Preparing to replace gdb 6.7.1-1ubuntu1 (using .../gdb_6.7.1-2ubuntu1_amd64.deb) ... Unpacking replacement gdb ... Preparing to replace gnome-about 1:2.21.4-0ubuntu1 (using .../gnome-about_1%3a2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement gnome-about ... Preparing to replace gnome-desktop-data 1:2.21.4-0ubuntu1 (using .../gnome-desktop-data_1%3a2.21.5-0ubuntu1_all.deb) ... Unpacking replacement gnome-desktop-data ... Preparing to replace libgnome-menu2 2.21.3-0ubuntu3 (using .../libgnome-menu2_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libgnome-menu2 ... Preparing to replace gnome-menus 2.21.3-0ubuntu3 (using .../gnome-menus_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement gnome-menus ... Preparing to replace python-gmenu 2.21.3-0ubuntu3 (using .../python-gmenu_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement python-gmenu ... Preparing to replace gnome-volume-manager 2.22.0-1ubuntu1 (using .../gnome-volume-manager_2.22.0-1ubuntu2_amd64.deb) ... Unpacking replacement gnome-volume-manager ... Preparing to replace gucharmap 1:2.21.4-0ubuntu1 (using .../gucharmap_1%3a2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement gucharmap ... Preparing to replace libgucharmap6 1:2.21.4-0ubuntu1 (using .../libgucharmap6_1%3a2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libgucharmap6 ... Preparing to replace hpijs 2.7.10+2.7.10-5ubuntu2 (using .../hpijs_2.7.12+2.7.12-0ubuntu1_amd64.deb) ... Unpacking replacement hpijs ... Preparing to replace libaprutil1 1.2.7+dfsg-2ubuntu1 (using .../libaprutil1_1.2.12+dfsg-2_amd64.deb) ... Unpacking replacement libaprutil1 ... Preparing to replace libavahi-client3 0.6.21-4ubuntu2 (using .../libavahi-client3_0.6.22-2ubuntu1_amd64.deb) ... Unpacking replacement libavahi-client3 ... Preparing to replace libavahi-compat-libdnssd1 0.6.21-4ubuntu2 (using .../libavahi-compat-libdnssd1_0.6.22-2ubuntu1_amd64.deb) ... Unpacking replacement libavahi-compat-libdnssd1 ... Preparing to replace libavahi-glib1 0.6.21-4ubuntu2 (using .../libavahi-glib1_0.6.22-2ubuntu1_amd64.deb) ... Unpacking replacement libavahi-glib1 ... Preparing to replace libavahi-qt3-1 0.6.21-4ubuntu2 (using .../libavahi-qt3-1_0.6.22-2ubuntu1_amd64.deb) ... Unpacking replacement libavahi-qt3-1 ... Selecting previously deselected package libavahi-ui0. Unpacking libavahi-ui0 (from .../libavahi-ui0_0.6.22-2ubuntu1_amd64.deb) ... Selecting previously deselected package libgtk-vnc-1.0-0. Unpacking libgtk-vnc-1.0-0 (from .../libgtk-vnc-1.0-0_0.3.2-1ubuntu2_amd64.deb) ... Preparing to replace libpam-gnome-keyring 2.21.4-0ubuntu2 (using .../libpam-gnome-keyring_2.21.5-0ubuntu1_amd64.deb) ... Unpacking replacement libpam-gnome-keyring ... Preparing to replace linux-generic 2.6.24.3.3 (using .../linux-generic_2.6.24.4.4_amd64.deb) ... Unpacking replacement linux-generic ... Preparing to replace linux-image-generic 2.6.24.3.3 (using .../linux-image-generic_2.6.24.4.4_amd64.deb) ... Unpacking replacement linux-image-generic ... Selecting previously deselected package linux-restricted-modules-2.6.24-4-generic. Unpacking linux-restricted-modules-2.6.24-4-generic (from .../linux-restricted-modules-2.6.24-4-generic_2.6.24.4-4.11_amd64.deb) ... Preparing to replace linux-restricted-modules-generic 2.6.24.3.3 (using .../linux-restricted-modules-generic_2.6.24.4.4_amd64.deb) ... Unpacking replacement linux-restricted-modules-generic ... Selecting previously deselected package linux-headers-2.6.24-4. Unpacking linux-headers-2.6.24-4 (from .../linux-headers-2.6.24-4_2.6.24-4.7_all.deb) ... Selecting previously deselected package linux-headers-2.6.24-4-generic. Unpacking linux-headers-2.6.24-4-generic (from .../linux-headers-2.6.24-4-generic_2.6.24-4.7_amd64.deb) ... Preparing to replace linux-headers-generic 2.6.24.3.3 (using .../linux-headers-generic_2.6.24.4.4_amd64.deb) ... Unpacking replacement linux-headers-generic ... Preparing to replace linux-libc-dev 2.6.24-4.6 (using .../linux-libc-dev_2.6.24-4.7_amd64.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace linux-source-2.6.24 2.6.24-4.6 (using .../linux-source-2.6.24_2.6.24-4.7_all.deb) ... Unpacking replacement linux-source-2.6.24 ... Preparing to replace linux-source 2.6.24.3.3 (using .../linux-source_2.6.24.4.4_all.deb) ... Unpacking replacement linux-source ... Selecting previously deselected package transmission-common. Unpacking transmission-common (from .../transmission-common_1.00-1_all.deb) ... Selecting previously deselected package transmission-gtk. Unpacking transmission-gtk (from .../transmission-gtk_1.00-1_amd64.deb) ... Preparing to replace ubuntu-desktop 1.86 (using .../ubuntu-desktop_1.87_amd64.deb) ... Unpacking replacement ubuntu-desktop ... Selecting previously deselected package vinagre. Unpacking vinagre (from .../vinagre_0.3-0ubuntu2_amd64.deb) ... Setting up libglib2.0-0 (2.15.2-0ubuntu1) ... Setting up flashplugin-nonfree (9.0.115.0ubuntu3) ... Installing from local file /var/cache/flashplugin-nonfree/install_flash_player_9_linux.tar.gz Flash Plugin installed. /usr/lib/nspluginwrapper/i386/linux/npviewer.bin: error while loading shared libraries: libselinux.so.1: cannot open shared object file: No such file or directory nspluginwrapper: no appropriate viewer found for /usr/lib/flashplugin-nonfree/libflashplayer.so dpkg: error processing flashplugin-nonfree (--configure): subprocess post-installation script returned error exit status 1 Setting up hplip-data (2.7.12-0ubuntu1) ... Setting up hplip (2.7.12-0ubuntu1) ... Installing new version of config file /etc/hp/hplip.conf ... Installing new version of config file /etc/udev/rules.d/55-hpmud.rules ... Creating/updating hplip user account... Setting up linux-image-2.6.24-4-generic (2.6.24-4.7) ... Running depmod. update-initramfs: Generating /boot/initrd.img-2.6.24-4-generic Running postinst hook script /sbin/update-grub. Searching for GRUB installation directory ... found: /boot/grub Searching for default file ... found: /boot/grub/default Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst Searching for splash image ... none found, skipping ... Found kernel: /vmlinuz-2.6.24-4-generic Found kernel: /vmlinuz-2.6.24-3-generic Found kernel: /memtest86+.bin Updating /boot/grub/menu.lst ... done Setting up linux-ubuntu-modules-2.6.24-4-generic (2.6.24-4.8) ... update-initramfs: Generating /boot/initrd.img-2.6.24-4-generic gzip: stdout: No space left on device update-initramfs: failed for /boot/initrd.img-2.6.24-4-generic dpkg: error processing linux-ubuntu-modules-2.6.24-4-generic (--configure): subprocess post-installation script returned error exit status 1 Setting up libgomp1 (4.2.2-6ubuntu1) ... Setting up lib32gcc1 (1:4.2.2-6ubuntu1) ... Setting up lib32stdc++6 (4.2.2-6ubuntu1) ... Setting up cpp-4.2 (4.2.2-6ubuntu1) ... Setting up gcc-4.2 (4.2.2-6ubuntu1) ... Setting up libffi4 (4.2.2-6ubuntu1) ... Setting up ubuntu-minimal (1.87) ... Setting up xkb-data (1.1~cvs.20080104.1-1ubuntu1) ... Setting up strace (4.5.15-1.1ubuntu1) ... Setting up ubuntu-standard (1.87) ... Setting up avahi-autoipd (0.6.22-2ubuntu1) ... Setting up libavahi-common-data (0.6.22-2ubuntu1) ... Setting up libavahi-common3 (0.6.22-2ubuntu1) ... Setting up libavahi-core5 (0.6.22-2ubuntu1) ... Setting up avahi-daemon (0.6.22-2ubuntu1) ... Installing new version of config file /etc/avahi/avahi-daemon.conf ... Installing new version of config file /etc/default/avahi-daemon ... Installing new version of config file /etc/init.d/avahi-daemon ... * Reloading system message bus config... [ OK ] * Starting Avahi mDNS/DNS-SD Daemon avahi-daemon [ OK ] Setting up libopenobex1 (1.3-3ubuntu1) ... Setting up gnome-vfs-obexftp (0.4-1) ... Setting up bluez-gnome (0.15-0ubuntu1) ... Installing new version of config file /etc/xdg/autostart/bluetooth-applet.desktop ... Setting up gnome-keyring (2.21.5-0ubuntu1) ... Setting up libgnome-keyring0 (2.21.5-0ubuntu1) ... Setting up libgnomeui-common (2.21.5-0ubuntu1) ... Setting up libgnomeui-0 (2.21.5-0ubuntu1) ... Setting up brasero (0.7.0-0ubuntu1) ... Setting up libcdparanoia0 (3.10+debian~pre0-6) ... Setting up cdparanoia (3.10+debian~pre0-6) ... Setting up libedataserver1.2-9 (2.21.5-0ubuntu1) ... Setting up libcamel1.2-10 (2.21.5-0ubuntu1) ... Setting up libebook1.2-9 (2.21.5-0ubuntu1) ... Setting up libgnome-desktop-2 (1:2.21.5-0ubuntu1) ... Setting up deskbar-applet (2.21.5-0ubuntu1) ... Setting up discover1-data (2.2008.01.12) ... Setting up dpkg-dev (1.14.15ubuntu1) ... Setting up dvd+rw-tools (7.0-9) ... Setting up evolution-data-server-common (2.21.5-0ubuntu1) ... Setting up libecal1.2-7 (2.21.5-0ubuntu1) ... Setting up libedata-book1.2-2 (2.21.5-0ubuntu1) ... Setting up libedata-cal1.2-6 (2.21.5-0ubuntu1) ... Setting up libegroupwise1.2-13 (2.21.5-0ubuntu1) ... Setting up libgdata1.2-1 (2.21.5-0ubuntu1) ... Setting up libgdata-google1.2-1 (2.21.5-0ubuntu1) ... Setting up evolution-data-server (2.21.5-0ubuntu1) ... Setting up evolution-common (2.21.5-0ubuntu1) ... Setting up libgtkhtml3.14-19 (3.17.5-0ubuntu1) ... Setting up gtkhtml3.14 (3.17.5-0ubuntu1) ... Setting up libedataserverui1.2-8 (2.21.5-0ubuntu1) ... Setting up libexchange-storage1.2-3 (2.21.5-0ubuntu1) ... Setting up evolution (2.21.5-0ubuntu1) ... Setting up evolution-plugins (2.21.5-0ubuntu1) ... Setting up gdb (6.7.1-2ubuntu1) ... Setting up gnome-desktop-data (1:2.21.5-0ubuntu1) ... Setting up gnome-about (1:2.21.5-0ubuntu1) ... Setting up libgnome-menu2 (2.21.5-0ubuntu1) ... Setting up python-gmenu (2.21.5-0ubuntu1) ... Setting up gnome-menus (2.21.5-0ubuntu1) ... Setting up gnome-volume-manager (2.22.0-1ubuntu2) ... Setting up libgucharmap6 (1:2.21.5-0ubuntu1) ... Setting up gucharmap (1:2.21.5-0ubuntu1) ... Setting up hpijs (2.7.12+2.7.12-0ubuntu1) ... Setting up libaprutil1 (1.2.12+dfsg-2) ... Setting up libavahi-client3 (0.6.22-2ubuntu1) ... Setting up libavahi-compat-libdnssd1 (0.6.22-2ubuntu1) ... Setting up libavahi-glib1 (0.6.22-2ubuntu1) ... Setting up libavahi-qt3-1 (0.6.22-2ubuntu1) ... Setting up libavahi-ui0 (0.6.22-2ubuntu1) ... Setting up libgtk-vnc-1.0-0 (0.3.2-1ubuntu2) ... Setting up libpam-gnome-keyring (2.21.5-0ubuntu1) ... dpkg: dependency problems prevent configuration of linux-image-generic: linux-image-generic depends on linux-ubuntu-modules-2.6.24-4-generic; however: Package linux-ubuntu-modules-2.6.24-4-generic is not configured yet. dpkg: error processing linux-image-generic (--configure): dependency problems - leaving unconfigured Setting up linux-restricted-modules-2.6.24-4-generic (2.6.24.4-4.11) ... Setting up linux-restricted-modules-generic (2.6.24.4.4) ... dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 2.6.24.4.4); however: Package linux-image-generic is not configured yet. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfigured Setting up linux-headers-2.6.24-4 (2.6.24-4.7) ... Setting up linux-headers-2.6.24-4-generic (2.6.24-4.7) ... Setting up linux-headers-generic (2.6.24.4.4) ... Setting up linux-libc-dev (2.6.24-4.7) ... Setting up linux-source-2.6.24 (2.6.24-4.7) ... Setting up linux-source (2.6.24.4.4) ... Setting up transmission-common (1.00-1) ... Setting up transmission-gtk (1.00-1) ... Setting up ubuntu-desktop (1.87) ... Setting up vinagre (0.3-0ubuntu2) ... Setting up g++-4.2 (4.2.2-6ubuntu1) ... Setting up libstdc++6-4.2-dev (4.2.2-6ubuntu1) ... Processing triggers for libc6 ... ldconfig deferred processing now taking place Errors were encountered while processing: flashplugin-nonfree linux-ubuntu-modules-2.6.24-4-generic linux-image-generic linux-generic E: Sub-process /usr/bin/dpkg returned an error code (1) ProblemType: Package Architecture: amd64 Date: Tue Jan 15 22:46:06 2008 DistroRelease: Ubuntu 8.04 ErrorMessage: dependency problems - leaving unconfigured NonfreeKernelModules: nvidia Package: linux-image-generic 2.6.24.4.4 PackageArchitecture: amd64 SourcePackage: linux-meta Title: package linux-image-generic 2.6.24.4.4 failed to install/upgrade: dependency problems - leaving unconfigured Uname: Linux tp64 2.6.24-3-generic #1 SMP Thu Jan 3 22:50:33 UTC 2008 x86_64 GNU/Linux ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package -- package linux-image-generic 2.6.24.4.4 failed to install/upgrade: dependency problems - leaving unconfigured https://bugs.launchpad.net/bugs/183349 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From kabus.ingo+launchpad at gmail.com Tue Jan 15 22:14:31 2008 From: kabus.ingo+launchpad at gmail.com (Ing0R) Date: Tue, 15 Jan 2008 22:14:31 -0000 Subject: [Bug 183349] Re: package linux-image-generic 2.6.24.4.4 failed to install/upgrade: dependency problems - leaving unconfigured References: <20080115221431.30605.29448.malonedeb@gandwana.ubuntu.com> Message-ID: <20080115221431.30605.1120.malone@gandwana.ubuntu.com> ** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/11362625/Dependencies.txt ** Attachment added: "DpkgTerminalLog.gz" http://launchpadlibrarian.net/11362626/DpkgTerminalLog.gz -- package linux-image-generic 2.6.24.4.4 failed to install/upgrade: dependency problems - leaving unconfigured https://bugs.launchpad.net/bugs/183349 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From ted.carr.corp at gmail.com Tue Jan 15 22:18:57 2008 From: ted.carr.corp at gmail.com (Knight_Owl) Date: Tue, 15 Jan 2008 22:18:57 -0000 Subject: [Bug 183352] package ndiswrapper-common 1.38-1ubuntu1 failed to install/upgrade: References: <20080115221857.12484.95215.malonedeb@potassium.ubuntu.com> Message-ID: <20080115221857.12484.95215.malonedeb@potassium.ubuntu.com> Public bug reported: Upgrade to version 7.10 ProblemType: Package Architecture: i386 Date: Tue Jan 15 17:12:26 2008 Dependencies: DistroRelease: Ubuntu 7.10 ErrorMessage: ErrorMessage: package ndiswrapper-common is already installed and configured Package: ndiswrapper-common 1.38-1ubuntu1 PackageArchitecture: all SourcePackage: ndiswrapper Title: package ndiswrapper-common 1.38-1ubuntu1 failed to install/upgrade: Uname: Linux athena 2.6.20-16-generic #2 SMP Sun Sep 23 19:50:39 UTC 2007 i686 GNU/Linux ** Affects: ndiswrapper (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package -- package ndiswrapper-common 1.38-1ubuntu1 failed to install/upgrade: https://bugs.launchpad.net/bugs/183352 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From karl.kornel at mindspeed.com Tue Jan 15 23:11:39 2008 From: karl.kornel at mindspeed.com (A. Karl Kornel) Date: Tue, 15 Jan 2008 23:11:39 -0000 Subject: [Bug 84821] Re: "attempt to access beyond end of device" when creating LVM snapshot References: <20070213012854.18546.36735.malonedeb@gandwana.ubuntu.com> Message-ID: <20080115231139.31050.61844.malone@gandwana.ubuntu.com> Hello! I don't know if this helps, but I'm experiencing the same problem, with ext3 filesystems. I'm running the latest version of Dapper. That is, if I run `apt-get update` and then `apt-get upgrade`, I do not see any packages listed. `uname -a` returns "Linux npbbz 2.6.15-29-686 #1 SMP PREEMPT Mon Sep 24 17:24:47 UTC 2007 i686 GNU/Linux". The file at '/proc/version' contains "Linux version 2.6.15-29-686 (buildd at terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Mon Sep 24 17:24:47 UTC 2007". The file at '/proc/cmdline' contains "root=/dev/mapper/VolGroup00-root ro". The file at '/proc/cpuinfo' contains: processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) MP CPU 2.70GHz stepping : 8 cpu MHz : 2694.761 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr bogomips : 5403.05 processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) MP CPU 2.70GHz stepping : 8 cpu MHz : 2694.761 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr bogomips : 5392.65 Package versions are: - linux-image-2.6.15-29-686: 2.6.15-29.60 - libc6: 2.3.6-0ubuntu20.5 - libdevmapper1.02: 1.02.05-1ubuntu1 - dmsetup: 1.02.05-1ubuntu1 - lvm-common: 1.5.20ubuntu4 - lvm2: 2.02.02-1ubuntu1.5 I'll post my dmesg output soon! -- "attempt to access beyond end of device" when creating LVM snapshot https://bugs.launchpad.net/bugs/84821 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From ttdlx1989 at yahoo.com Wed Jan 16 07:13:15 2008 From: ttdlx1989 at yahoo.com (Joey Chan) Date: Wed, 16 Jan 2008 07:13:15 -0000 Subject: [Bug 183445] brightness doesn't work properly when thinkpad_acpi is compiled as module References: <20080116071316.26683.2147.malonedeb@potassium.ubuntu.com> Message-ID: <20080116071316.26683.2147.malonedeb@potassium.ubuntu.com> Public bug reported: Binary package hint: linux-source Same kernel, except compiled with thinkpad_acpi as module or compiled-in. Hardware keys work fine, though. Brightness applet and gnome-power-manager brightness options do not work when thinkpad_acpi is compiled as a module. However, all works fine when thinkpad_acpi is compiled into the kernel. This is on a Thinkpad T40p Kernel version: 2.6.22-14 Suspend2 patches applied, but patches don't affect thinkpad_acpi files. Generic kernel's brightness doesn't work properly either, but I have not compiled the generic kernel with thinkpad_acpi built-in. I would assume it's the same. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- brightness doesn't work properly when thinkpad_acpi is compiled as module https://bugs.launchpad.net/bugs/183445 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From martin.pitt at ubuntu.com Wed Jan 16 08:44:19 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 16 Jan 2008 08:44:19 -0000 Subject: [Bug 57233] Re: Minor revision 2.6.15-26 doesn't detect attached SCSI disks to LSI 1030ST References: <20060822111724.13507.65528.malonedeb@gandwana.ubuntu.com> Message-ID: <20080116084419.23028.12827.malone@gandwana.ubuntu.com> Marc also did the test on the LSI controller and ran into the same problem when RAID was actually enabled. Without RAID it works fine. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Confirmed Target: ubuntu-6.06.2 => dapper-updates -- Minor revision 2.6.15-26 doesn't detect attached SCSI disks to LSI 1030ST https://bugs.launchpad.net/bugs/57233 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From bug-track at fisher-privat.net Wed Jan 16 10:33:23 2008 From: bug-track at fisher-privat.net (fishor) Date: Wed, 16 Jan 2008 10:33:23 -0000 Subject: [Bug 183445] Re: brightness doesn't work properly when thinkpad_acpi is compiled as module References: <20080116071316.26683.2147.malonedeb@potassium.ubuntu.com> Message-ID: <20080116103324.17069.78324.launchpad@gangotri.ubuntu.com> ** Changed in: linux-meta (Ubuntu) Assignee: (unassigned) => fishor (bug-track) Status: New => Incomplete -- brightness doesn't work properly when thinkpad_acpi is compiled as module https://bugs.launchpad.net/bugs/183445 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From bug-track at fisher-privat.net Wed Jan 16 10:27:00 2008 From: bug-track at fisher-privat.net (fishor) Date: Wed, 16 Jan 2008 10:27:00 -0000 Subject: [Bug 183445] Re: brightness doesn't work properly when thinkpad_acpi is compiled as module References: <20080116071316.26683.2147.malonedeb@potassium.ubuntu.com> Message-ID: <20080116102701.26683.10344.malone@potassium.ubuntu.com> Please start you kernel with thinkpad_acpi compiled as module and post results of falowing commands: modprobe -c | grep think lsmod | grep think ls -l /proc/acpi/ibm/brightness -- brightness doesn't work properly when thinkpad_acpi is compiled as module https://bugs.launchpad.net/bugs/183445 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From mail at michaelvanschaik.nl Wed Jan 16 11:21:28 2008 From: mail at michaelvanschaik.nl (micschk) Date: Wed, 16 Jan 2008 11:21:28 -0000 Subject: [Bug 21574] Re: Only headphones work after suspend on HP nx8220 References: <20060113141334.21012.43238.launchpad@macquarie.warthogs.hbd.com> <20071231060727.21858.61495.malone@gangotri.ubuntu.com> <8763yf2rj7.fsf@server.ak.quickcircuit.co.nz> Message-ID: <1200482488.7567.2.camel@canis-minor> Hey Mario, Finally came to recompiling the kernel modules, works like a charm! Thanks for your help. - Michael On Mon, 2007-12-31 at 08:32 +0000, Mario Becroft wrote: > micschk writes: > > > I'm happy to finally have found a solution to this problem (I hope). > > It's probably not the right place to ask, but I've been searching on how > > to unapply this (or any) patch, without success... > > > > Could anyone give some pointers or perhaps a how to on on how to do > > this? (I've been fiddling around with gentoo for a year, just don't know > > how to do this kind of stuff on ubuntu). > > It may still be touch-and-go; someone else said reversing this patch did > not fix the problem on their machine--so you'll have to try it and > see. It definitely works for me on my nw8240. > > I don't know anything about dealing with the patch on ubuntu in > particular, but assuming that you can build the kernel, all you need to > do is go and manually change the relevant line of code and then rebuild > your kernel (or just the relevant module). > > Good luck! > > -- > Mario Becroft > -- Only headphones work after suspend on HP nx8220 https://bugs.launchpad.net/bugs/21574 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From jani at ubuntu.com Wed Jan 16 11:35:03 2008 From: jani at ubuntu.com (Jani Monoses) Date: Wed, 16 Jan 2008 11:35:03 -0000 Subject: [Bug 21574] Re: Only headphones work after suspend on HP nx8220 References: <20060113141334.21012.43238.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080116113503.17069.53356.malone@gangotri.ubuntu.com> Mario, is this still broken upstream? -- Only headphones work after suspend on HP nx8220 https://bugs.launchpad.net/bugs/21574 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From mb at gem.win.co.nz Wed Jan 16 12:02:22 2008 From: mb at gem.win.co.nz (Mario Becroft) Date: Wed, 16 Jan 2008 12:02:22 -0000 Subject: [Bug 21574] Re: Only headphones work after suspend on HP nx8220 References: <20060113141334.21012.43238.launchpad@macquarie.warthogs.hbd.com> <20080116113503.17069.53356.malone@gangotri.ubuntu.com> Message-ID: <87ejciashd.fsf@server.ak.quickcircuit.co.nz> Jani Monoses writes: > Mario, > is this still broken upstream? > -- > Only headphones work after suspend on HP nx8220 > https://bugs.launchpad.net/bugs/21574 I don't know about the latest linux, but as of 2.6.22.9 it was still broken. I just got mail from someone else who had the same problem and the same fix worked for them. But a while ago I heard from someone else who tried it and it did not help with the problem on their system. It seems there may be a few different problems that result in similar symptoms. There may be a good reason for the original patch--it may fix some other problem on a different system. This audio stuff is all a bit crazy. All I know is, the fix works for me, and at least some other people. I guess it really needs someone to look into this chipset in depth and understand what is actually going on, rather than just randomly patching things. Sorry I can't be more specific. -- Mario Becroft -- Only headphones work after suspend on HP nx8220 https://bugs.launchpad.net/bugs/21574 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From martin.pitt at ubuntu.com Wed Jan 16 12:37:05 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 16 Jan 2008 12:37:05 -0000 Subject: [Bug 81782] Re: Realtek ethernet controller detected but no automatic dhcp on edgy References: <20070127025519.22572.6127.malonedeb@gandwana.ubuntu.com> Message-ID: <20080116123705.23028.87569.malone@gandwana.ubuntu.com> Not interesting enough any more for Edgy. ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Fix Committed => Won't Fix Target: edgy-updates => None -- Realtek ethernet controller detected but no automatic dhcp on edgy https://bugs.launchpad.net/bugs/81782 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From martin.pitt at ubuntu.com Wed Jan 16 12:37:20 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 16 Jan 2008 12:37:20 -0000 Subject: [Bug 81782] Re: Realtek ethernet controller detected but no automatic dhcp on edgy References: <20070127025519.22572.6127.malonedeb@gandwana.ubuntu.com> Message-ID: <20080116123720.16330.38610.malone@gangotri.ubuntu.com> Fixed kernel is in dapper-updates now. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- Realtek ethernet controller detected but no automatic dhcp on edgy https://bugs.launchpad.net/bugs/81782 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From martin.pitt at ubuntu.com Wed Jan 16 12:36:12 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 16 Jan 2008 12:36:12 -0000 Subject: [Bug 73647] Re: Broadcom NetXtreme II BCM5708 not detected on install References: <20061128204814.1640.91141.malonedeb@gandwana.ubuntu.com> Message-ID: <20080116123612.16330.20559.malone@gangotri.ubuntu.com> Kernel is in -updates now. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- Broadcom NetXtreme II BCM5708 not detected on install https://bugs.launchpad.net/bugs/73647 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From martin.pitt at ubuntu.com Wed Jan 16 12:39:09 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 16 Jan 2008 12:39:09 -0000 Subject: [Bug 72696] Re: tg3: doesn't recognize the network device on Fujitsu Esprimo E5915 References: <20061121123558.25827.10144.malonedeb@gandwana.ubuntu.com> Message-ID: <20080116123910.16330.32601.malone@gangotri.ubuntu.com> Could not be verified, and Adrian's comment seems to indicate that this needs another patch. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => In Progress Target: ubuntu-6.06.2 => dapper-updates -- tg3: doesn't recognize the network device on Fujitsu Esprimo E5915 https://bugs.launchpad.net/bugs/72696 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From martin.pitt at ubuntu.com Wed Jan 16 12:38:09 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 16 Jan 2008 12:38:09 -0000 Subject: [Bug 39518] Re: kernel oops in usbserial on ppc with appletouch loaded (palm hotsync attempt) References: <20060414013959.1684.83034.malonedeb@gangotri.ubuntu.com> Message-ID: <20080116123809.23028.16188.malone@gandwana.ubuntu.com> Still works fine with the updated kernel, so considering verified. Kernel is in -updates now. ** Tags added: verification-done ** Tags removed: verification-needed ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- kernel oops in usbserial on ppc with appletouch loaded (palm hotsync attempt) https://bugs.launchpad.net/bugs/39518 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From martin.pitt at ubuntu.com Wed Jan 16 12:49:17 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 16 Jan 2008 12:49:17 -0000 Subject: [Bug 37452] Re: fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100, Dell SASR5/i) References: <20060331083135.5415.666.malonedeb@gangotri.ubuntu.com> Message-ID: <20080116124917.23028.4953.malone@gandwana.ubuntu.com> ** Attachment added: "boot messages from Bjoern Boschmann (X4100)" http://launchpadlibrarian.net/11374700/boot-noquiet.gif -- fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100, Dell SASR5/i) https://bugs.launchpad.net/bugs/37452 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From martin.pitt at ubuntu.com Wed Jan 16 12:48:06 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 16 Jan 2008 12:48:06 -0000 Subject: [Bug 37452] Re: fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100, Dell SASR5/i) References: <20060331083135.5415.666.malonedeb@gangotri.ubuntu.com> Message-ID: <20080116124806.16330.8480.malone@gangotri.ubuntu.com> Backing this out of 6.06.2, since it still does not work. Bjoern Boschmann kindly tested the 6.06.2 CD on an X4100 with this controller: 0000:02:03.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064 PCI-X Fusion-MPT SAS (rev 02) I'll attach a screenshot from booting (which doesn't tell much, though). ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => In Progress Target: ubuntu-6.06.2 => dapper-updates ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Confirmed -- fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100, Dell SASR5/i) https://bugs.launchpad.net/bugs/37452 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From martin.pitt at ubuntu.com Wed Jan 16 12:41:45 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 16 Jan 2008 12:41:45 -0000 Subject: [Bug 56885] Re: e1000 driver not working properly on x86_64? References: <20060819091800.12543.64715.malonedeb@gangotri.ubuntu.com> Message-ID: <20080116124145.23028.11022.malone@gandwana.ubuntu.com> Fixed kernel is in dapper-updates now. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- e1000 driver not working properly on x86_64? https://bugs.launchpad.net/bugs/56885 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From martin.pitt at ubuntu.com Wed Jan 16 12:43:13 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 16 Jan 2008 12:43:13 -0000 Subject: [Bug 103729] Re: kernel crashes on lvremove References: <20070406133301.10514.89353.malonedeb@gandwana.ubuntu.com> Message-ID: <20080116124313.16330.52211.malone@gangotri.ubuntu.com> Thanks to all for the testing. Fixed kernel is in dapper-updates now. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- kernel crashes on lvremove https://bugs.launchpad.net/bugs/103729 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From martin.pitt at ubuntu.com Wed Jan 16 12:42:40 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 16 Jan 2008 12:42:40 -0000 Subject: [Bug 128568] Re: from bugzilla.kernel.org - data corruption with Opteron CPUs and nvidia chipsets//memory hole mapping / iommu related bug References: <20070726172203.6248.47237.malonedeb@gandwana.ubuntu.com> Message-ID: <20080116124240.23028.60916.malone@gandwana.ubuntu.com> Fixed kernel is in dapper-updates now. Nobody was able to verify, though, so please reopen if you still have problems. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- from bugzilla.kernel.org - data corruption with Opteron CPUs and nvidia chipsets//memory hole mapping / iommu related bug https://bugs.launchpad.net/bugs/128568 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From martin.pitt at ubuntu.com Wed Jan 16 12:41:22 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 16 Jan 2008 12:41:22 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20080116124122.26075.71440.malone@potassium.ubuntu.com> For the record, the kernel in dapper-updates has a patch which should fix this, but nobody tested it so far. The kernel was moved to -updates to fix the other bugs. Please reopen if you still have problems in Ubuntu 6.06.2 or 8.04. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- JMicron PATA/SATA Controller does not work https://bugs.launchpad.net/bugs/57502 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From vereva at bk.ru Wed Jan 16 17:34:04 2008 From: vereva at bk.ru (VereVa) Date: Wed, 16 Jan 2008 17:34:04 -0000 Subject: [Bug 54294] Re: Failed to allocate mem resource #6 ... References: <20060727223134.3952.48463.malonedeb@gangotri.ubuntu.com> Message-ID: <20080116173404.26583.20382.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 159241 *** https://bugs.launchpad.net/bugs/159241 ** Description changed: Every time I boot my laptop, an HP Pavilion dv8220ea (https://wiki.ubuntu.com/LaptopTestingTeam/HP_Pavilion_DV8220EA) I get the text below which I've taken from /var/log/syslog: [ 0.372370] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 [ 0.372441] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 [ 0.372506] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 [ 0.372571] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 [ 0.372636] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2 [ 0.372702] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2 [ 0.372850] PCI: Cannot allocate resource region 0 of device 0000:06:00.0 [ 0.373818] PCI: Failed to allocate mem resource #6:20000 at d0000000 for 0000:01:00.0 I'm not quite sure what it means but I thought someone should know about it. I haven't seen any problems with the boot up otherwise, runs nicely. Since the original bug the following systems have been added to this bug: (last updated 12th Sept.) Supermicro PDSBE-0 board Acer Aspire 5021WLMi ACER Aspire 5920G with Ubuntu Feisty 7.04 Acer Aspire 9303 ACER Aspire 9410 Acer TravelMate 636LCi (nVidia Geforce 2 Go) Asus Z71V BenQ Joybook R55 G21 Compaq C315LA Fujitsu Amilo XI1526 (nvidia go 7600) fujitsu siemens amilo PI1556 fujitsu siemens amilo xi 1526 + fujitsu siemens amilo pro v2055 HP dv5245ea (nVidiaGeforce GO 7400) HP dv5285ea (nVidiaGeforce GO 7400) HP dv6000t HP dv6000 (nVidia 8400 GS) HP dv6215Eea (nVidia Geforce 7400) HP nx9105 HP dv9297ea HP dv9375eu (nVidia GeForce 7600) Intel DQ965GF (board?) Intel 945 PSN desktop MB MD98000 Sony VAIO VGN-C2ZB Sony Vaio VGN-FZ11M (GeForce 8400M GT) Toshiba Satellite 5200-903 (Geforce FX 5600 Go) toshiba satellite A100 - 750 toshiba satellite m30-801 Toshiba Satellite M35 (nVidia GeForce Go 5200) Toshiba Tecra S4 Zepto Znote 6214W (nVidia G70) -- Failed to allocate mem resource #6 ... https://bugs.launchpad.net/bugs/54294 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From noel at devtech.com Thu Jan 17 01:32:11 2008 From: noel at devtech.com (Noel J. Bergman) Date: Thu, 17 Jan 2008 01:32:11 -0000 Subject: [Bug 12519] Re: Removing modular bay drive causes system freeze References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080117013211.6984.21826.launchpad@gangotri.ubuntu.com> ** Also affects: linux (Ubuntu) Importance: Undecided Status: New -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From noel at devtech.com Thu Jan 17 01:37:48 2008 From: noel at devtech.com (Noel J. Bergman) Date: Thu, 17 Jan 2008 01:37:48 -0000 Subject: [Bug 182058] Re: [Hardy] [Regression] Removing Device From Hotswap Bay Freezes System References: <20080111172224.8267.89802.malonedeb@potassium.ubuntu.com> Message-ID: <20080117013748.23582.100.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 12519 *** https://bugs.launchpad.net/bugs/12519 ** This bug has been marked a duplicate of bug 12519 Removing modular bay drive causes system freeze -- [Hardy] [Regression] Removing Device From Hotswap Bay Freezes System https://bugs.launchpad.net/bugs/182058 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber (via bug 12519). From noel at devtech.com Thu Jan 17 01:37:26 2008 From: noel at devtech.com (Noel J. Bergman) Date: Thu, 17 Jan 2008 01:37:26 -0000 Subject: [Bug 12519] [Hardy] [Regression] Removing Device From Hotswap Bay Freezes System References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080117013726.7122.75148.malone@gangotri.ubuntu.com> This appears to have been fixed for Gutsy, and is broken again for Hardy. I have tested both. With Gutsy, I can easily swap my CD/DVD multi-burner and my PATA 2nd HD adapter. Going further, if I configure the scripts for ACPI as described by http://thinkwiki.org/wiki/How_to_hotswap_UltraBay_devices#Scripts_for_hotswapping and configure HAL as described by http://thinkwiki.org/wiki/How_to_hotswap_UltraBay_devices#HAL_support, everything works a treat. If I remove the drive with Hardy, the system locks up solid. Not just a UI freeze. Nothing responds, not even over the LAN or Bluetooth. A power cycle is reequired. Another bit of data: with Gutsy and my ThinkPad T61p 6457-7WU, the hotswap bay shows up as 1:0:0:0; with Hardy, it shows up as 3:0:0:0. I am marking my bug #182058 as a duplicate of this bug. -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From bjoern at boschman.de Thu Jan 17 08:42:56 2008 From: bjoern at boschman.de (jessy) Date: Thu, 17 Jan 2008 08:42:56 -0000 Subject: [Bug 37452] Re: fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100, Dell SASR5/i) References: <20060331083135.5415.666.malonedeb@gangotri.ubuntu.com> Message-ID: <20080117084256.23582.69137.malone@gandwana.ubuntu.com> >From my point of view the situation is more critical. Until now it was at least possible to boot and install an X4100 using Dapper.1 CD IF HW-RAID was disabled. Using Dapper.2 CD from 10. Jan 2008 this is no longer possible as the machine freezes. Martin Pitt told me that it was possible using some X4100 in their test- center - maybe that already was some X4100 M2?? -- fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100, Dell SASR5/i) https://bugs.launchpad.net/bugs/37452 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From bug-track at fisher-privat.net Thu Jan 17 09:37:35 2008 From: bug-track at fisher-privat.net (fishor) Date: Thu, 17 Jan 2008 09:37:35 -0000 Subject: [Bug 183720] acpi should be enabled by default for kvm guest References: <20080117093735.26583.90319.malonedeb@potassium.ubuntu.com> Message-ID: <20080117093735.26583.90319.malonedeb@potassium.ubuntu.com> Public bug reported: ubuntu as kvm guest couse more wakeups if it started without acpi. Normally kernel will try to find aout the date of the BIOS and bcouse kvm/qemu do not have DMI table it will fault and force start without acpi. Results of powertop: kvm guest with acpi forced Wakeups-from-idle per second : 107,1 interval: 15,0s Top causes for wakeups: 55,2% ( 68,5) qemu-system-x86 : sys_timer_settime (posix_timer_fn) 8,2% ( 10,2) qemu-system-x86 : start_apic_timer (apic_timer_fn) kvm guest without acpi Wakeups-from-idle per second : 191,4 interval: 15,0s Top causes for wakeups: 54,4% (168,3) qemu-system-x86 : sys_timer_settime (posix_timer_fn) 32,3% (100,0) qemu-system-x86 : __kvm_migrate_apic_timer (apic_timer_fn) ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- acpi should be enabled by default for kvm guest https://bugs.launchpad.net/bugs/183720 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From bug-track at fisher-privat.net Thu Jan 17 10:22:34 2008 From: bug-track at fisher-privat.net (fishor) Date: Thu, 17 Jan 2008 10:22:34 -0000 Subject: [Bug 183720] Re: acpi should be enabled by default for kvm guest References: <20080117093735.26583.90319.malonedeb@potassium.ubuntu.com> Message-ID: <20080117102234.6984.52341.launchpad@gangotri.ubuntu.com> ** Bug watch added: Linux Kernel Bug Tracker #9768 http://bugzilla.kernel.org/show_bug.cgi?id=9768 ** Also affects: linux via http://bugzilla.kernel.org/show_bug.cgi?id=9768 Importance: Unknown Status: Unknown ** Changed in: linux-meta (Ubuntu) Status: New => Confirmed -- acpi should be enabled by default for kvm guest https://bugs.launchpad.net/bugs/183720 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From bugwatch at bugs.launchpad.net Thu Jan 17 10:57:26 2008 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Thu, 17 Jan 2008 10:57:26 -0000 Subject: [Bug 183720] Re: acpi should be enabled by default for kvm guest References: <20080117093735.26583.90319.malonedeb@potassium.ubuntu.com> Message-ID: <20080117105808.6449.75623.launchpad@forster.canonical.com> ** Changed in: linux Status: Unknown => Confirmed -- acpi should be enabled by default for kvm guest https://bugs.launchpad.net/bugs/183720 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From lukeg at altern.org Thu Jan 17 17:53:11 2008 From: lukeg at altern.org (Mathieu Gaspard) Date: Thu, 17 Jan 2008 17:53:11 -0000 Subject: [Bug 181255] Re: [hardy] iwl3945 wireless LED is never on References: <20080108143243.7349.16584.malonedeb@gangotri.ubuntu.com> Message-ID: <20080117175311.23678.25225.malone@gandwana.ubuntu.com> Same here on Compaq nx7400 with up to date Hardy -- [hardy] iwl3945 wireless LED is never on https://bugs.launchpad.net/bugs/181255 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From sastraxi at gmail.com Thu Jan 17 18:31:36 2008 From: sastraxi at gmail.com (Cameron Gorrie) Date: Thu, 17 Jan 2008 18:31:36 -0000 Subject: [Bug 181255] Re: [hardy] iwl3945 wireless LED is never on References: <20080108143243.7349.16584.malonedeb@gangotri.ubuntu.com> Message-ID: <20080117183136.26683.91137.malone@potassium.ubuntu.com> This is the case also on Gutsy, with its iwl3945 driver. For those interested, the kill-switch also doesn't work here. -- [hardy] iwl3945 wireless LED is never on https://bugs.launchpad.net/bugs/181255 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From stephane.demurget at free.fr Thu Jan 17 21:26:43 2008 From: stephane.demurget at free.fr (=?utf-8?q?St=C3=A9phane_D=C3=A9murget?=) Date: Thu, 17 Jan 2008 21:26:43 -0000 Subject: [Bug 183883] hardy toshiba_acpi: Unknown parameter `hotkeys_over_acpi' References: <20080117212643.23582.98484.malonedeb@gandwana.ubuntu.com> Message-ID: <20080117212643.23582.98484.malonedeb@gandwana.ubuntu.com> Public bug reported: The hardy kernels toshiba_acpi module does not support the 'hotkeys_over_acpi' option anymore so my hotkeys do not work at all since. I purged acpi-support and reinstalled it and it is not an upgrade issue but simply the stock kernel not supporting it. $ cat /etc/modprobe.d/toshiba_acpi.modprobe options toshiba_acpi hotkeys_over_acpi=1 Maybe the hotkeys will move away from the acpi method ? I tried to remove the argument and the module loads correctly but unfortunately no hotkey works. I have a toshiba satellite M30 with the following packages installed as today : ii acpi-support 0.105 a collection of useful events for acpi ii linux-image-ge 2.6.24.4.4 Generic Linux kernel image thanks :) ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- hardy toshiba_acpi: Unknown parameter `hotkeys_over_acpi' https://bugs.launchpad.net/bugs/183883 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From stephane.demurget at free.fr Thu Jan 17 21:41:42 2008 From: stephane.demurget at free.fr (=?utf-8?q?St=C3=A9phane_D=C3=A9murget?=) Date: Thu, 17 Jan 2008 21:41:42 -0000 Subject: [Bug 183883] Re: hardy toshiba_acpi: Unknown parameter `hotkeys_over_acpi' References: <20080117212643.23582.98484.malonedeb@gandwana.ubuntu.com> Message-ID: <20080117214142.23582.61966.malone@gandwana.ubuntu.com> This is the kernel commit that removed the feature: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=5ee6edbcde4d3b14e4e03d4b331df1099a34aa8d Explanation is included in the feature-removal-schedule text file here in this diff: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=5ee6edbcde4d3b14e4e03d4b331df1099a34aa8d#patch2 Is there any alternative for using hotkeys? -- hardy toshiba_acpi: Unknown parameter `hotkeys_over_acpi' https://bugs.launchpad.net/bugs/183883 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From karl.kornel at mindspeed.com Thu Jan 17 22:01:19 2008 From: karl.kornel at mindspeed.com (A. Karl Kornel) Date: Thu, 17 Jan 2008 22:01:19 -0000 Subject: [Bug 84821] Re: "attempt to access beyond end of device" when creating LVM snapshot References: <20070213012854.18546.36735.malonedeb@gandwana.ubuntu.com> Message-ID: <20080117220119.26683.86102.malone@potassium.ubuntu.com> Here's a control example, showing the output of lvcreate when there are no problems reported: kornelak at npbbz:/home/bugzilla/stage$ dmesg|tail [17180786.720000] EXT3-fs: mounted filesystem with ordered data mode. [17180799.652000] kjournald starting. Commit interval 5 seconds [17180799.656000] EXT3 FS on dm-41, internal journal [17180799.656000] EXT3-fs: recovery complete. [17180799.656000] EXT3-fs: mounted filesystem with ordered data mode. [17203415.252000] ibm_acpi: ec object not found [17808026.704000] ibm_acpi: ec object not found [18412815.972000] ibm_acpi: ec object not found [19017364.116000] ibm_acpi: ec object not found [19622027.484000] ibm_acpi: ec object not found kornelak at npbbz:/home/bugzilla/stage$ cd /var/lib/mysql/main kornelak at npbbz:/var/lib/mysql/main$ sudo lvs LV VG Attr LSize Origin Snap% Move Log Copy% Database_Logs VolGroup00 -wi-ao 10.00G Database_Main VolGroup00 -wi-ao 5.00G Database_Stage_Orig VolGroup00 -wi-ao 35.00G Database_Transition VolGroup00 -wi-ao 80.00G Home VolGroup00 -wi-a- 3.00G Live VolGroup00 -wi-ao 94.00G Root VolGroup00 -wi-a- 10.00G Stage_Orig VolGroup00 -wi-ao 76.00G Swap VolGroup00 -wi-ao 2.00G root VolGroup00 -wi-ao 15.00G kornelak at npbbz:/var/lib/mysql/main$ sudo lvcreate --verbose --snapshot --size 5G --name Stage_31743 VolGroup00/Stage_Orig Setting chunksize to 16 sectors. Finding volume group "VolGroup00" Archiving volume group "VolGroup00" metadata (seqno 473). Creating logical volume Stage_31743 Creating volume group backup "/etc/lvm/backup/VolGroup00" (seqno 474). Found volume group "VolGroup00" Creating VolGroup00-Stage_31743 Loading VolGroup00-Stage_31743 table Resuming VolGroup00-Stage_31743 (254:4) Zeroing start of logical volume "Stage_31743" Found volume group "VolGroup00" Removing VolGroup00-Stage_31743 (254:4) Found volume group "VolGroup00" Found volume group "VolGroup00" Found volume group "VolGroup00" Creating VolGroup00-Stage_Orig-real Loading VolGroup00-Stage_Orig-real table Resuming (254:4) Loading VolGroup00-Stage_Orig table Creating VolGroup00-Stage_31743-cow Loading VolGroup00-Stage_31743-cow table Resuming (254:8) Creating VolGroup00-Stage_31743 Loading VolGroup00-Stage_31743 table Suspending VolGroup00-Stage_Orig (254:5) Suspending VolGroup00-Stage_Orig-real (254:4) Found volume group "VolGroup00" Loading VolGroup00-Stage_Orig-real table Suppressed VolGroup00-Stage_Orig-real identical table reload. Resuming VolGroup00-Stage_Orig-real (254:4) Loading VolGroup00-Stage_31743-cow table Suppressed VolGroup00-Stage_31743-cow identical table reload. Resuming VolGroup00-Stage_31743 (254:30) Resuming VolGroup00-Stage_Orig (254:5) Creating volume group backup "/etc/lvm/backup/VolGroup00" (seqno 475). Logical volume "Stage_31743" created kornelak at npbbz:/var/lib/mysql/main$ dmesg|tail [17180786.720000] EXT3-fs: mounted filesystem with ordered data mode. [17180799.652000] kjournald starting. Commit interval 5 seconds [17180799.656000] EXT3 FS on dm-41, internal journal [17180799.656000] EXT3-fs: recovery complete. [17180799.656000] EXT3-fs: mounted filesystem with ordered data mode. [17203415.252000] ibm_acpi: ec object not found [17808026.704000] ibm_acpi: ec object not found [18412815.972000] ibm_acpi: ec object not found [19017364.116000] ibm_acpi: ec object not found [19622027.484000] ibm_acpi: ec object not found kornelak at npbbz:/var/lib/mysql/main$ sudo lvs LV VG Attr LSize Origin Snap% Move Log Copy% Database_Logs VolGroup00 -wi-ao 10.00G Database_Main VolGroup00 -wi-ao 5.00G Database_Stage_Orig VolGroup00 -wi-ao 35.00G Database_Transition VolGroup00 -wi-ao 80.00G Home VolGroup00 -wi-a- 3.00G Live VolGroup00 -wi-ao 94.00G Root VolGroup00 -wi-a- 10.00G Stage_31743 VolGroup00 swi-a- 5.00G Stage_Orig 0.00 Stage_Orig VolGroup00 owi-ao 76.00G Swap VolGroup00 -wi-ao 2.00G root VolGroup00 -wi-ao 15.00G kornelak at npbbz:/var/lib/mysql/main$ -- "attempt to access beyond end of device" when creating LVM snapshot https://bugs.launchpad.net/bugs/84821 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From karl.kornel at mindspeed.com Thu Jan 17 22:05:49 2008 From: karl.kornel at mindspeed.com (A. Karl Kornel) Date: Thu, 17 Jan 2008 22:05:49 -0000 Subject: [Bug 84821] Re: "attempt to access beyond end of device" when creating LVM snapshot References: <20070213012854.18546.36735.malonedeb@gandwana.ubuntu.com> Message-ID: <20080117220549.23678.6573.malone@gandwana.ubuntu.com> And, finally, an example of the problem: kornelak at npbbz:/var/lib/mysql/main$ dmesg|tail [17180786.720000] EXT3-fs: mounted filesystem with ordered data mode. [17180799.652000] kjournald starting. Commit interval 5 seconds [17180799.656000] EXT3 FS on dm-41, internal journal [17180799.656000] EXT3-fs: recovery complete. [17180799.656000] EXT3-fs: mounted filesystem with ordered data mode. [17203415.252000] ibm_acpi: ec object not found [17808026.704000] ibm_acpi: ec object not found [18412815.972000] ibm_acpi: ec object not found [19017364.116000] ibm_acpi: ec object not found [19622027.484000] ibm_acpi: ec object not found kornelak at npbbz:/var/lib/mysql/main$ sudo lvs LV VG Attr LSize Origin Snap% Move Log Copy% Database_Logs VolGroup00 -wi-ao 10.00G Database_Main VolGroup00 -wi-ao 5.00G Database_Stage_31743 VolGroup00 swi-a- 5.00G Database_Stage_Orig 0.00 Database_Stage_32781 VolGroup00 swi-a- 5.00G Database_Stage_Orig 0.00 Database_Stage_34352 VolGroup00 swi-a- 5.00G Database_Stage_Orig 0.00 Database_Stage_Orig VolGroup00 owi-ao 35.00G Database_Transition VolGroup00 -wi-ao 80.00G Home VolGroup00 -wi-a- 3.00G Live VolGroup00 -wi-ao 94.00G Root VolGroup00 -wi-a- 10.00G Stage_31743 VolGroup00 swi-a- 5.00G Stage_Orig 0.00 Stage_32781 VolGroup00 swi-a- 5.00G Stage_Orig 0.00 Stage_34352 VolGroup00 swi-a- 5.00G Stage_Orig 0.00 Stage_Orig VolGroup00 owi-ao 76.00G Swap VolGroup00 -wi-ao 2.00G root VolGroup00 -wi-ao 15.00G kornelak at npbbz:/var/lib/mysql/main$ sudo lvcreate --verbose --snapshot --size 5G --name Database_Stage_35780 VolGroup00/Database_Stage_Orig Setting chunksize to 16 sectors. Finding volume group "VolGroup00" Archiving volume group "VolGroup00" metadata (seqno 485). Creating logical volume Database_Stage_35780 Creating volume group backup "/etc/lvm/backup/VolGroup00" (seqno 486). Found volume group "VolGroup00" Creating VolGroup00-Database_Stage_35780 Loading VolGroup00-Database_Stage_35780 table Resuming VolGroup00-Database_Stage_35780 (254:42) Zeroing start of logical volume "Database_Stage_35780" Found volume group "VolGroup00" Removing VolGroup00-Database_Stage_35780 (254:42) Found volume group "VolGroup00" Found volume group "VolGroup00" Found volume group "VolGroup00" Loading VolGroup00-Database_Stage_Orig-real table Suppressed VolGroup00-Database_Stage_Orig-real identical table reload. Loading VolGroup00-Database_Stage_Orig table Suppressed VolGroup00-Database_Stage_Orig identical table reload. Loading VolGroup00-Database_Stage_31743-cow table Suppressed VolGroup00-Database_Stage_31743-cow identical table reload. Loading VolGroup00-Database_Stage_31743 table Suppressed VolGroup00-Database_Stage_31743 identical table reload. Loading VolGroup00-Database_Stage_32781-cow table Suppressed VolGroup00-Database_Stage_32781-cow identical table reload. Loading VolGroup00-Database_Stage_32781 table Suppressed VolGroup00-Database_Stage_32781 identical table reload. Loading VolGroup00-Database_Stage_34352-cow table Suppressed VolGroup00-Database_Stage_34352-cow identical table reload. Loading VolGroup00-Database_Stage_34352 table Suppressed VolGroup00-Database_Stage_34352 identical table reload. Creating VolGroup00-Database_Stage_35780-cow Loading VolGroup00-Database_Stage_35780-cow table Resuming (254:42) Creating VolGroup00-Database_Stage_35780 Loading VolGroup00-Database_Stage_35780 table Suspending VolGroup00-Database_Stage_Orig (254:9) with filesystem sync. Suspending VolGroup00-Database_Stage_31743 (254:33) with filesystem sync. Suspending VolGroup00-Database_Stage_32781 (254:35) with filesystem sync. Suspending VolGroup00-Database_Stage_34352 (254:41) with filesystem sync. Suspending VolGroup00-Database_Stage_Orig-real (254:31) with filesystem sync. Suspending VolGroup00-Database_Stage_31743-cow (254:32) with filesystem sync. Suspending VolGroup00-Database_Stage_Orig-real (254:31) with filesystem sync. Suspending VolGroup00-Database_Stage_32781-cow (254:34) with filesystem sync. Suspending VolGroup00-Database_Stage_Orig-real (254:31) with filesystem sync. Suspending VolGroup00-Database_Stage_34352-cow (254:40) with filesystem sync. Suspending VolGroup00-Database_Stage_Orig-real (254:31) with filesystem sync. Found volume group "VolGroup00" Loading VolGroup00-Database_Stage_Orig-real table Suppressed VolGroup00-Database_Stage_Orig-real identical table reload. Resuming VolGroup00-Database_Stage_Orig-real (254:31) Loading VolGroup00-Database_Stage_Orig table Suppressed VolGroup00-Database_Stage_Orig identical table reload. Loading VolGroup00-Database_Stage_31743-cow table Suppressed VolGroup00-Database_Stage_31743-cow identical table reload. Resuming VolGroup00-Database_Stage_31743-cow (254:32) Loading VolGroup00-Database_Stage_31743 table Suppressed VolGroup00-Database_Stage_31743 identical table reload. Loading VolGroup00-Database_Stage_32781-cow table Suppressed VolGroup00-Database_Stage_32781-cow identical table reload. Resuming VolGroup00-Database_Stage_32781-cow (254:34) Loading VolGroup00-Database_Stage_32781 table Suppressed VolGroup00-Database_Stage_32781 identical table reload. Loading VolGroup00-Database_Stage_34352-cow table Suppressed VolGroup00-Database_Stage_34352-cow identical table reload. Resuming VolGroup00-Database_Stage_34352-cow (254:40) Loading VolGroup00-Database_Stage_34352 table Suppressed VolGroup00-Database_Stage_34352 identical table reload. Loading VolGroup00-Database_Stage_35780-cow table Suppressed VolGroup00-Database_Stage_35780-cow identical table reload. Resuming VolGroup00-Database_Stage_31743 (254:33) Resuming VolGroup00-Database_Stage_32781 (254:35) Resuming VolGroup00-Database_Stage_34352 (254:41) Resuming VolGroup00-Database_Stage_35780 (254:43) Resuming VolGroup00-Database_Stage_Orig (254:9) Creating volume group backup "/etc/lvm/backup/VolGroup00" (seqno 487). Logical volume "Database_Stage_35780" created kornelak at npbbz:/var/lib/mysql/main$ dmesg|tail [17180799.656000] EXT3-fs: mounted filesystem with ordered data mode. [17203415.252000] ibm_acpi: ec object not found [17808026.704000] ibm_acpi: ec object not found [18412815.972000] ibm_acpi: ec object not found [19017364.116000] ibm_acpi: ec object not found [19622027.484000] ibm_acpi: ec object not found [19995004.724000] attempt to access beyond end of device [19995004.724000] dm-42: rw=17, want=1463812128, limit=10485760 [19995004.724000] device-mapper: Error reading/writing snapshot [19995004.856000] device-mapper: snapshot is marked invalid kornelak at npbbz:/var/lib/mysql/main$ sudo lvs LV VG Attr LSize Origin Snap% Move Log Copy% Database_Logs VolGroup00 -wi-ao 10.00G Database_Main VolGroup00 -wi-ao 5.00G Database_Stage_31743 VolGroup00 swi-a- 5.00G Database_Stage_Orig 0.00 Database_Stage_32781 VolGroup00 swi-a- 5.00G Database_Stage_Orig 0.00 Database_Stage_34352 VolGroup00 swi-a- 5.00G Database_Stage_Orig 0.00 Database_Stage_35780 VolGroup00 Swi-I- 5.00G Database_Stage_Orig 100.00 Database_Stage_Orig VolGroup00 owi-ao 35.00G Database_Transition VolGroup00 -wi-ao 80.00G Home VolGroup00 -wi-a- 3.00G Live VolGroup00 -wi-ao 94.00G Root VolGroup00 -wi-a- 10.00G Stage_31743 VolGroup00 swi-a- 5.00G Stage_Orig 0.00 Stage_32781 VolGroup00 swi-a- 5.00G Stage_Orig 0.00 Stage_34352 VolGroup00 swi-a- 5.00G Stage_Orig 0.00 Stage_Orig VolGroup00 owi-ao 76.00G Swap VolGroup00 -wi-ao 2.00G root VolGroup00 -wi-ao 15.00G kornelak at npbbz:/var/lib/mysql/main$ date Thu Jan 17 14:04:00 PST 2008 kornelak at npbbz:/var/lib/mysql/main$ sudo vgs VG #PV #LV #SN Attr VSize VFree VolGroup00 4 10 7 wz--n- 370.28G 5.28G kornelak at npbbz:/var/lib/mysql/main$ sudo pvs PV VG Fmt Attr PSize PFree /dev/sda2 VolGroup00 lvm2 a- 9.88G 0 /dev/sdb VolGroup00 lvm2 a- 99.97G 992.00M /dev/sdd2 VolGroup00 lvm2 a- 23.47G 3.34G /dev/sde1 VolGroup00 lvm2 a- 236.97G 992.00M kornelak at npbbz:/var/lib/mysql/main$ -- "attempt to access beyond end of device" when creating LVM snapshot https://bugs.launchpad.net/bugs/84821 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From mail2leu at arcor.de Thu Jan 17 23:30:35 2008 From: mail2leu at arcor.de (Leu) Date: Thu, 17 Jan 2008 23:30:35 -0000 Subject: [Bug 31440] Re: sdhci module and ENE CB-710 PCMCIA card reader References: <20060214213807.2410.52669.malonedeb@gangotri.ubuntu.com> Message-ID: <20080117233035.23582.61760.launchpad@gandwana.ubuntu.com> ** Also affects: linux-source-2.6.22 (Ubuntu) Importance: Undecided Status: New -- sdhci module and ENE CB-710 PCMCIA card reader https://bugs.launchpad.net/bugs/31440 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From brian at ubuntu.com Thu Jan 17 23:45:05 2008 From: brian at ubuntu.com (Brian Murray) Date: Thu, 17 Jan 2008 23:45:05 -0000 Subject: [Bug 121748] Re: no sound device detected with Dimension XPS D300 References: <20070622141145.11010.62472.malonedeb@gangotri.ubuntu.com> Message-ID: <20080117234505.26683.57990.malone@potassium.ubuntu.com> We are closing this bug report as it lacks the information, described in the previous comments, we need to investigate the problem further. However, please reopen it if you can give us the missing information and feel free to submit bug reports in the future. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Incomplete => Invalid -- no sound device detected with Dimension XPS D300 https://bugs.launchpad.net/bugs/121748 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From mail2leu at arcor.de Fri Jan 18 01:09:25 2008 From: mail2leu at arcor.de (Leu) Date: Fri, 18 Jan 2008 01:09:25 -0000 Subject: [Bug 31440] Re: sdhci module and ENE CB-710 card reader References: <20060214213807.2410.52669.malonedeb@gangotri.ubuntu.com> Message-ID: <20080118010925.12769.59845.malone@potassium.ubuntu.com> Added today (18.01.08): affects linux-source-2.6.22-14.47-generic ->No affect of inserting a SD-Card lspci -vvnn 02:09.2 FLASH memory [0501]: ENE Technology Inc CB710 Memory Card Reader Controller [1524:0510] Subsystem: Benq Corporation Unknown device [17ff:5010] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- modprobe of sdhci done. -> No effect. dmesg and /var/log/syslog give no corresponding output to the Input of a SD-Card Is there no chance of getting the specifications from ENE after some years now? Not worth a try to manually mount it? -- sdhci module and ENE CB-710 PCMCIA card reader https://bugs.launchpad.net/bugs/31440 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From gQuigs at gMail.com Fri Jan 18 01:40:35 2008 From: gQuigs at gMail.com (gQuigs) Date: Fri, 18 Jan 2008 01:40:35 -0000 Subject: [Bug 56441] Re: Cannot mount SATA disk as a root References: <20060815115109.24756.13886.malonedeb@gangotri.ubuntu.com> Message-ID: <20080118014035.31119.61789.malone@gangotri.ubuntu.com> Please reopen if this is still an issue for you. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: New => Invalid -- Cannot mount SATA disk as a root https://bugs.launchpad.net/bugs/56441 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From tim.gardner at canonical.com Fri Jan 18 03:48:01 2008 From: tim.gardner at canonical.com (Tim Gardner) Date: Fri, 18 Jan 2008 03:48:01 -0000 Subject: [Bug 125816] Re: linux-image postinst matches header_postinst_hook for postinst_hook incorrectly References: <20070713162019.31676.87785.malonedeb@gangotri.ubuntu.com> Message-ID: <20080118034801.12210.89835.malone@potassium.ubuntu.com> Martin - It looks like with the fixes in DKMS and kernel that kernel- packages in Gutsy proposed is no longer relevant. I think it is safe to remove. -- linux-image postinst matches header_postinst_hook for postinst_hook incorrectly https://bugs.launchpad.net/bugs/125816 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for kernel-package in ubuntu. From martin.pitt at ubuntu.com Fri Jan 18 06:22:04 2008 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Fri, 18 Jan 2008 06:22:04 -0000 Subject: [Bug 125816] Re: linux-image postinst matches header_postinst_hook for postinst_hook incorrectly References: <20070713162019.31676.87785.malonedeb@gangotri.ubuntu.com> Message-ID: <20080118062205.1925.58657.malone@gandwana.ubuntu.com> I removed kernel-package from feisty-proposed. ** Changed in: kernel-package (Ubuntu Feisty) Status: Fix Committed => Won't Fix -- linux-image postinst matches header_postinst_hook for postinst_hook incorrectly https://bugs.launchpad.net/bugs/125816 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for kernel-package in ubuntu. From ttdlx1989 at yahoo.com Fri Jan 18 07:58:03 2008 From: ttdlx1989 at yahoo.com (Joey Chan) Date: Fri, 18 Jan 2008 07:58:03 -0000 Subject: [Bug 183445] Re: brightness doesn't work properly when thinkpad_acpi is compiled as module References: <20080116071316.26683.2147.malonedeb@potassium.ubuntu.com> Message-ID: <20080118075804.12769.81167.malone@potassium.ubuntu.com> I'm not on the box at the moment, but I can tell you that thinkpad_acpi IS loaded, because all hotkeys work. They don't work if the module isn't loaded, such as when before I had to manually load it after recompiling thinkpad_acpi as a module (I wanted to try out experimental=1) Brightness hotkeys work as well, after thinkpad_acpi was loaded. But the applet doesn't work, and there's no gnome osd. Volume works, though, OSD and all. Which is what puzzles me. -- brightness doesn't work properly when thinkpad_acpi is compiled as module https://bugs.launchpad.net/bugs/183445 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From 62607 at bugs.launchpad.net Fri Jan 18 15:30:34 2008 From: 62607 at bugs.launchpad.net (Launchpad Bug Tracker) Date: Fri, 18 Jan 2008 15:30:34 -0000 Subject: [Bug 62607] [NEW] Multiple cifs issues - CIFS: reset ATTR_READONLY on Windows References: <20060927120448.10311.20367.malonedeb@gandwana.ubuntu.com> Message-ID: <20080118153035.12210.67019.launchpad@canonical@potassium.ubuntu.com> You have been subscribed to a public bug: Binary package hint: smbfs Since Dapper (which this bug-report is to be considered for) I started using cifs instead of smbfs to circumvent the issues reported in Bug#44874 and to get support for large files >2 GiB. The shares are hosted on a machine running Windows 2000. I have multiple shares mounted via fstab, looking like this (w/o the newlines): //server/sharename /mnt/localdir cifs rw,soft,credentials=/root/.smbcred,uid=1000,gid=1000, dir_mode=0755,file_mode=0644,iocharset=iso8859-15 Right after boot, the (working) cifs-mounts don't show up in mtab, as already mentioned in Bug#44874. This causes double-mounts if "mount -a" will be executed, and "umount -a" won't work as supposed. But my main grievance is the following: Once a file gets its mode set to 444 (full read-only), it can't be changed anymore. chmod won't give any errors, it just doesn't do anything. As long as the mode is set to at least 644, chmod works fine. So once 444 is set, I have to change the read-only attribute directly on the Windows-machine back to read/write, or remount using smbfs instead of cifs to chmod. Also, when viewing a PDF-file on such a cifs-mounted share, KPDF constantly reloads the file, which is very annoying. I have to disable the option "Watch file" to stop the constant reloading. This tells me, that somehow files on cifs-mounted shares appear "unstable" or constantly changing to some applications. smbfs works correctly in both cases, but is to be considered obsolete and has other, major issues. For now, I have no further clue what may be causing this behaviour. EDIT: tar also confirms the "unstableness" of files on cifs-shares when creating a tar-archive. Output from tar (slightly modified): tar: /mnt/[path]/[filename]: file changed as we read it ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Assignee: Chuck Short (zulcss) Status: Incomplete -- Multiple cifs issues - CIFS: reset ATTR_READONLY on Windows https://bugs.edge.launchpad.net/bugs/62607 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From chuck.short at canonical.com Fri Jan 18 15:30:34 2008 From: chuck.short at canonical.com (Chuck Short) Date: Fri, 18 Jan 2008 15:30:34 -0000 Subject: [Bug 62607] Re: Multiple cifs issues - CIFS: reset ATTR_READONLY on Windows References: <20060927120448.10311.20367.malonedeb@gandwana.ubuntu.com> Message-ID: <20080118153034.12210.70421.malone@potassium.ubuntu.com> Re-assigning to correct package. Since its a kernel fix. ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: samba => linux-source-2.6.15 Assignee: (unassigned) => Chuck Short (zulcss) -- Multiple cifs issues - CIFS: reset ATTR_READONLY on Windows https://bugs.launchpad.net/bugs/62607 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From leann at ubuntu.com Fri Jan 18 15:58:21 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Fri, 18 Jan 2008 15:58:21 -0000 Subject: [Bug 12519] Re: Removing modular bay drive causes system freeze References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080118155821.31215.79113.malone@gangotri.ubuntu.com> Hi Noel, Thanks for the update. Per the kernel team's bug policy, can you please attach the following information when running Hardy. Please be sure to attach each file as a separate attachment. * uname -a > uname-a.log * cat /proc/version_signature > version.log * dmesg > dmesg.log * sudo lspci -vvnn > lspci-vvnn.log Also, after you notice the issue and have to power cycle, could you maybe examine /var/log/kern.log.0. Maybe it will have captured a useful error message prior to locking up. For more information regarding the kernel team bug policy, please refer to https://wiki.ubuntu.com/KernelTeamBugPolicies . Thanks again and we appreciate your help and feedback. ** Changed in: linux (Ubuntu) Status: New => Incomplete -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From maor.gm at gmail.com Fri Jan 18 17:03:44 2008 From: maor.gm at gmail.com (maor) Date: Fri, 18 Jan 2008 17:03:44 -0000 Subject: [Bug 41091] Re: Ubuntu crash when connecting to port replicator References: <20060424122529.17670.95052.malonedeb@gandwana.ubuntu.com> Message-ID: <20080118170344.2676.28286.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.22 (Ubuntu) Status: Fix Released => Confirmed -- Ubuntu crash when connecting to port replicator https://bugs.launchpad.net/bugs/41091 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From maor.gm at gmail.com Fri Jan 18 17:10:48 2008 From: maor.gm at gmail.com (maor) Date: Fri, 18 Jan 2008 17:10:48 -0000 Subject: [Bug 41091] Re: Ubuntu crash when connecting to port replicator References: <20060424122529.17670.95052.malonedeb@gandwana.ubuntu.com> Message-ID: <20080118171048.31119.42048.malone@gangotri.ubuntu.com> I've got Dell precision m65, when I'm re docking in makes Gusty hanging. When removing the bay module I can re dock as many times without being able to repreduce the issue. -- Ubuntu crash when connecting to port replicator https://bugs.launchpad.net/bugs/41091 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From 117040 at bugs.launchpad.net Sat Jan 19 00:43:11 2008 From: 117040 at bugs.launchpad.net (Launchpad Bug Tracker) Date: Sat, 19 Jan 2008 00:43:11 -0000 Subject: [Bug 117040] usb-serial.h missing from kernel headers References: <20070526180235.12421.55443.malonedeb@gandwana.ubuntu.com> Message-ID: <20080119004312.31119.57885.launchpad@canonical@gangotri.ubuntu.com> You have been subscribed to a public bug: usb-serial.h is not located in any of the linux-header packages in the default repositories. There are several threads in the forums asking for information on how to install that particular header. None of these threads have a resolution. ** Affects: linux-meta (Ubuntu) Importance: Undecided Assignee: Brian Murray (brian-murray) Status: Invalid -- usb-serial.h missing from kernel headers https://bugs.launchpad.net/bugs/117040 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From leann at ubuntu.com Sat Jan 19 00:43:10 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Sat, 19 Jan 2008 00:43:10 -0000 Subject: [Bug 117040] Re: usb-serial.h missing from kernel headers References: <20070526180235.12421.55443.malonedeb@gandwana.ubuntu.com> Message-ID: <20080119004311.31119.34597.malone@gangotri.ubuntu.com> Hi, The reason usb-serial.h is not in the linux-header package is because usb-serial.h no longer exists. As of July 11, 2006 usb-serial.h was moved to a different location in the kernel source (include/linux/usb/serial.h). The following is the git log information regarding the change: :~/linux-2.6/include/linux/usb$ git log -p a969888ce91673c7f4b86520d851a6f0d5a5fa7d commit a969888ce91673c7f4b86520d851a6f0d5a5fa7d Author: Greg Kroah-Hartman Date: Tue Jul 11 21:22:58 2006 -0700 [PATCH] USB: move usb-serial.h to include/linux/usb/ USB serial outside of the kernel tree can not build properly due to usb-serial.h being buried down in the source tree. This patch moves the location of the file to include/linux/usb and fixes up all of the usb serial drivers to handle the move properly. Cc: Sergei Organov Signed-off-by: Greg Kroah-Hartman ** Changed in: linux-meta (Ubuntu) Sourcepackagename: None => linux-meta Status: Incomplete => Invalid -- usb-serial.h missing from kernel headers https://bugs.launchpad.net/bugs/117040 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From perryizgr8 at gmail.com Sat Jan 19 07:43:57 2008 From: perryizgr8 at gmail.com (perryizgr8) Date: Sat, 19 Jan 2008 07:43:57 -0000 Subject: [Bug 30124] Re: Suspend/Hibernate do not function on Dell Inspiron 9300 References: <20060131043417.9344.89728.malonedeb@gandwana.ubuntu.com> Message-ID: <20080119074357.31215.30586.malone@gangotri.ubuntu.com> i'm running an hp pavillion amd athlon 2ghz with nvidia gforce 4 integrated on nforce 2. i did not have a problem in dapper drake (6.10). but suspend and hibernate do not work in gutsy. system goes to sleep or hibernates normally but never restores. i am writing this post to tell everyone that this bug is not only for dell inspiron laptops. -- Suspend/Hibernate do not function on Dell Inspiron 9300 https://bugs.launchpad.net/bugs/30124 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From francesco.baldini at gmail.com Sat Jan 19 12:19:16 2008 From: francesco.baldini at gmail.com (Francesco Baldini) Date: Sat, 19 Jan 2008 12:19:16 -0000 Subject: [Bug 34902] Re: Ralink Wireless legacy drivers (rt2500 rt61 rt73 rt2570) USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20080119121916.6728.57667.malone@potassium.ubuntu.com> I also can confirm on Ubuntu Gutsy 32 bit: Linux version 2.6.22-14-generic (buildd at terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007 Using Linksys WUSB54GR with rt73 chipset. -- Ralink Wireless legacy drivers (rt2500 rt61 rt73 rt2570) USB/PCMCIA/PCI hangs PC https://bugs.launchpad.net/bugs/34902 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From sebastian.ro at gmx.de Sat Jan 19 12:29:16 2008 From: sebastian.ro at gmx.de (Sebastian Rode) Date: Sat, 19 Jan 2008 12:29:16 -0000 Subject: [Bug 57541] Re: ipw2100 doesn't work after resume from standby References: <20060824064427.24457.42134.malonedeb@gangotri.ubuntu.com> Message-ID: <20080119122917.1925.3414.malone@gandwana.ubuntu.com> We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Thanks again! ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Incomplete => Invalid -- ipw2100 doesn't work after resume from standby https://bugs.launchpad.net/bugs/57541 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From sebastian.ro at gmx.de Sat Jan 19 12:28:56 2008 From: sebastian.ro at gmx.de (Sebastian Rode) Date: Sat, 19 Jan 2008 12:28:56 -0000 Subject: [Bug 57331] Re: Much bugs after resume from hibernation References: <20060822183333.6059.9489.malonedeb@gangotri.ubuntu.com> Message-ID: <20080119122856.6102.31786.malone@potassium.ubuntu.com> We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Thanks again! ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Incomplete => Invalid -- Much bugs after resume from hibernation https://bugs.launchpad.net/bugs/57331 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From sebastian.ro at gmx.de Sat Jan 19 12:33:16 2008 From: sebastian.ro at gmx.de (Sebastian Rode) Date: Sat, 19 Jan 2008 12:33:16 -0000 Subject: [Bug 58268] Re: Ehci_hcd & ACPI Problem on Sony Vaio References: <20060830212911.5486.2497.malonedeb@gandwana.ubuntu.com> Message-ID: <20080119123317.1925.37283.malone@gandwana.ubuntu.com> We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Thanks again! ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Incomplete => Invalid -- Ehci_hcd & ACPI Problem on Sony Vaio https://bugs.launchpad.net/bugs/58268 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From sebastian.ro at gmx.de Sat Jan 19 12:34:08 2008 From: sebastian.ro at gmx.de (Sebastian Rode) Date: Sat, 19 Jan 2008 12:34:08 -0000 Subject: [Bug 58189] Re: Kernel doesn't support HPT RocketRAID 1520 References: <20060830111551.17097.39726.malonedeb@gangotri.ubuntu.com> Message-ID: <20080119123408.1925.15112.malone@gandwana.ubuntu.com> We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Thanks again! ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Incomplete => Invalid -- Kernel doesn't support HPT RocketRAID 1520 https://bugs.launchpad.net/bugs/58189 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From sebastian.ro at gmx.de Sat Jan 19 12:32:32 2008 From: sebastian.ro at gmx.de (Sebastian Rode) Date: Sat, 19 Jan 2008 12:32:32 -0000 Subject: [Bug 58131] Re: Segmentation Faults on Ubuntu Kernel References: <20060829190220.5577.94453.malonedeb@gandwana.ubuntu.com> Message-ID: <20080119123233.30665.89108.malone@gangotri.ubuntu.com> We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Thanks again! ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Incomplete => Invalid -- Segmentation Faults on Ubuntu Kernel https://bugs.launchpad.net/bugs/58131 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From sebastian.ro at gmx.de Sat Jan 19 12:30:18 2008 From: sebastian.ro at gmx.de (Sebastian Rode) Date: Sat, 19 Jan 2008 12:30:18 -0000 Subject: [Bug 57752] Re: AV710 ICE1724 eeprom error! References: <20060825182320.17097.66034.malonedeb@gangotri.ubuntu.com> Message-ID: <20080119123018.6102.7739.malone@potassium.ubuntu.com> We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Thanks again! ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Incomplete => Invalid -- AV710 ICE1724 eeprom error! https://bugs.launchpad.net/bugs/57752 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From francesco.baldini at gmail.com Sat Jan 19 13:18:45 2008 From: francesco.baldini at gmail.com (Francesco Baldini) Date: Sat, 19 Jan 2008 13:18:45 -0000 Subject: [Bug 34902] Re: Ralink Wireless legacy drivers (rt2500 rt61 rt73 rt2570) USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20080119131845.6728.1282.malone@potassium.ubuntu.com> I solved my problem downloading the cvs driver directly from serailmonkey: http://rt2x00.serialmonkey.com/wiki/index.php/Downloads Then i recompiled the dirver and reloaded the rt73 module, now it seems to work fine. -- Ralink Wireless legacy drivers (rt2500 rt61 rt73 rt2570) USB/PCMCIA/PCI hangs PC https://bugs.launchpad.net/bugs/34902 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From shermanresearch at gmail.com Sat Jan 19 21:49:56 2008 From: shermanresearch at gmail.com (lostangel78) Date: Sat, 19 Jan 2008 21:49:56 -0000 Subject: [Bug 12637] Re: LCD Brightness on Laptop Always Set Very Low at Boot References: <20060113132646.21012.81619.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080119214956.31215.30826.malone@gangotri.ubuntu.com> Try typing this command in a terminal xgamma -gamma 0.75 I have posted my own solution here: http://ubuntuforums.org/showthread.php?p=4168042#post4168042 -- LCD Brightness on Laptop Always Set Very Low at Boot https://bugs.launchpad.net/bugs/12637 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From honkkis at gmail.com Sun Jan 20 14:01:28 2008 From: honkkis at gmail.com (alonso) Date: Sun, 20 Jan 2008 14:01:28 -0000 Subject: [Bug 61235] Re: USB mass storage stops working after a while References: <20060919095715.28762.79398.malonedeb@gandwana.ubuntu.com> Message-ID: <20080120140128.6574.11542.malone@potassium.ubuntu.com> I would like to add that I had similar problem with USB HD through kernels 2.6.18-2.6.22 using the combination of Lacie USB 500 GB HD and VIA VT6212L USB chip in an old PIII 500 Mhz machine using debian 4.0 (also tried ubuntu live CDs for gutsy and hardy to no avail) USB 2.0 Device: Lacie black desktop USB 500 GB hard disk Jan 20 15:27:43 localhost kernel: Vendor: ST350083 Model: 0AS R us 001 Device 002: ID 059f:1010 LaCie, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x059f LaCie, Ltd idProduct 0x1010 bcdDevice c6.83 iManufacturer 2 LaCie iProduct 3 iSerial 1 ST3500830A 9QG616JN bNumConfigurations 1 USB Host is prodige USB 2.0 pci-card with VIA VT6212L chip: 00:10.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65) (prog-if 20 [EHCI]) Subsystem: VIA Technologies, Inc. USB 2.0 Flags: bus master, medium devsel, latency 66, IRQ 11 Memory at 42000000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Very old Compaq deskpro PIII 500 Mhz computer I tried everything suggested in https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/61235 What helped me was the combination of 1 and 2: 1. following patch to /drivers/usb/storage/unusual_devs.h (found this solution in http://bugzilla.kernel.org/show_bug.cgi?id=6817 ) UNUSUAL_DEV( 0x059f, 0x1010, 0x0000, 0x0000, "Lacie", "USB to IDE Disk", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ), 2. in ehci-hcd.c: #define EHCI_TUNE_CERR 0 /* 0-3 qtd retries; 0 == don't stop */ I still see occasional high speed usb device resets, but so far no disconnects. There is definitely something strange going on with this setup, but I'm happy to have solved it. Also the transfer rate is pretty ok, for such an old machine: hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 88 MB in 3.03 seconds = 29.01 MB/sec -- USB mass storage stops working after a while https://bugs.launchpad.net/bugs/61235 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From mantridp at gmail.com Sun Jan 20 15:18:36 2008 From: mantridp at gmail.com (mantridp) Date: Sun, 20 Jan 2008 15:18:36 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080120151837.31215.53348.malone@gangotri.ubuntu.com> hi i have just upgraded from gutsy to hardy alpha 3....however during initial boot process it hangs with this message pnpacpi:execeeded the max number of memory resources. 12 then it tries splash screen with different resolutions and its dead. or it takes me to initramfs screen.. what do i do -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From ravindran.k at gmail.com Sun Jan 20 16:59:17 2008 From: ravindran.k at gmail.com (Ravindran K) Date: Sun, 20 Jan 2008 16:59:17 -0000 Subject: [Bug 110636] Re: hdparm - cannot set dma on IDE hard drive that works via pata References: <20070427195503.15194.16436.malonedeb@gandwana.ubuntu.com> Message-ID: <20080120165917.6728.80507.malone@potassium.ubuntu.com> I also have the same issue.. I observe that DMA is not enabled on my HDDs and I'm unable to enable them using hdparm. I have no idea how to accomplish the same using sdparm As a result, the drives are running slower. Apparently, this due to the conversion of HDX to SDX (hda to sda) in recent Ubuntu releases. Not sure when this started, (I'm tried the Temp fix but still the drives come us as sda..sdb ...). Some info below on messages I get: ____________________________________________________ hdparm -i /dev/sda /dev/sda: Model=QUANTUM FIREBALLlct15 20 , FwRev=A01.0F00, SerialNo=613024132415 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=32256, SectSize=21298, ECCbytes=4 BuffType=DualPortCache, BuffSize=418kB, MaxMultSect=16, MultSect=?16? CurCHS=17475/15/63, CurSects=16513875, LBA=yes, LBAsects=39876480 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 udma3 udma4 AdvancedPM=no WriteCache=enabled Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: ATA/ATAPI-1,2,3,4,5 * signifies the current active mode root at homeserver:~# hdparm -i /dev/sdb /dev/sdb: Model=ST380011A , FwRev=8.01 , SerialNo=4JV1QKYD Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=?16? CurCHS=17475/15/63, CurSects=16513875, LBA=yes, LBAsects=156301488 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5 AdvancedPM=no WriteCache=enabled Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: ATA/ATAPI-1,2,3,4,5,6 * signifies the current active mode root at homeserver:~# ____________________________________________________ root at homeserver:~# hdparm -d1 -X66 /dev/sda /dev/sda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Inappropriate ioctl for device setting xfermode to 66 (UltraDMA mode2) SG_IO: bad/missing ATA_16 sense data:: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 HDIO_DRIVE_CMD(setxfermode) failed: Input/output error root at homeserver:~# hdparm -d1 -X66 /dev/sdb /dev/sdb: setting using_dma to 1 (on) HDIO_SET_DMA failed: Inappropriate ioctl for device setting xfermode to 66 (UltraDMA mode2) SG_IO: bad/missing ATA_16 sense data:: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 HDIO_DRIVE_CMD(setxfermode) failed: Input/output error -- hdparm - cannot set dma on IDE hard drive that works via pata https://bugs.launchpad.net/bugs/110636 You received this bug notification because you are a member of Kernel Bugs, which is a bug assignee. From ravindran.k at gmail.com Sun Jan 20 16:59:12 2008 From: ravindran.k at gmail.com (Ravindran K) Date: Sun, 20 Jan 2008 16:59:12 -0000 Subject: [Bug 110636] Re: hdparm - cannot set dma on IDE hard drive that works via pata References: <20070427195503.15194.16436.malonedeb@gandwana.ubuntu.com> Message-ID: <20080120165912.31215.50673.malone@gangotri.ubuntu.com> I also have the same issue.. I observe that DMA is not enabled on my HDDs and I'm unable to enable them using hdparm. I have no idea how to accomplish the same using sdparm As a result, the drives are running slower. Apparently, this due to the conversion of HDX to SDX (hda to sda) in recent Ubuntu releases. Not sure when this started, (I'm tried the Temp fix but still the drives come us as sda..sdb ...). Some info below on messages I get: ____________________________________________________ hdparm -i /dev/sda /dev/sda: Model=QUANTUM FIREBALLlct15 20 , FwRev=A01.0F00, SerialNo=613024132415 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=32256, SectSize=21298, ECCbytes=4 BuffType=DualPortCache, BuffSize=418kB, MaxMultSect=16, MultSect=?16? CurCHS=17475/15/63, CurSects=16513875, LBA=yes, LBAsects=39876480 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 udma3 udma4 AdvancedPM=no WriteCache=enabled Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: ATA/ATAPI-1,2,3,4,5 * signifies the current active mode root at homeserver:~# hdparm -i /dev/sdb /dev/sdb: Model=ST380011A , FwRev=8.01 , SerialNo=4JV1QKYD Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=?16? CurCHS=17475/15/63, CurSects=16513875, LBA=yes, LBAsects=156301488 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5 AdvancedPM=no WriteCache=enabled Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: ATA/ATAPI-1,2,3,4,5,6 * signifies the current active mode root at homeserver:~# ____________________________________________________ root at homeserver:~# hdparm -d1 -X66 /dev/sda /dev/sda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Inappropriate ioctl for device setting xfermode to 66 (UltraDMA mode2) SG_IO: bad/missing ATA_16 sense data:: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 HDIO_DRIVE_CMD(setxfermode) failed: Input/output error root at homeserver:~# hdparm -d1 -X66 /dev/sdb /dev/sdb: setting using_dma to 1 (on) HDIO_SET_DMA failed: Inappropriate ioctl for device setting xfermode to 66 (UltraDMA mode2) SG_IO: bad/missing ATA_16 sense data:: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 HDIO_DRIVE_CMD(setxfermode) failed: Input/output error -- hdparm - cannot set dma on IDE hard drive that works via pata https://bugs.launchpad.net/bugs/110636 You received this bug notification because you are a member of Kernel Bugs, which is a bug assignee. From ricardopintoalmeida at gmail.com Sun Jan 20 19:00:31 2008 From: ricardopintoalmeida at gmail.com (Ricardo) Date: Sun, 20 Jan 2008 19:00:31 -0000 Subject: [Bug 34651] Re: ACPI does not work on Asus motherboard with nForce chipset References: <20060312213644.17044.65036.malonedeb@gangotri.ubuntu.com> Message-ID: <20080120190031.2676.28299.malone@gandwana.ubuntu.com> This happens with me as well. Motherboard M2n-X plus with amd 64 x2 4400+. With acpi apic support on XP works but Ubuntu doesn't and vice versa. -- ACPI does not work on Asus motherboard with nForce chipset https://bugs.launchpad.net/bugs/34651 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From noel at devtech.com Mon Jan 21 01:21:35 2008 From: noel at devtech.com (Noel J. Bergman) Date: Mon, 21 Jan 2008 01:21:35 -0000 Subject: [Bug 12519] Re: Removing modular bay drive causes system freeze References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080121012136.2772.31711.malone@gandwana.ubuntu.com> ** Attachment added: "uname-a.log" http://launchpadlibrarian.net/11455160/uname-a.log -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From noel at devtech.com Mon Jan 21 01:21:56 2008 From: noel at devtech.com (Noel J. Bergman) Date: Mon, 21 Jan 2008 01:21:56 -0000 Subject: [Bug 12519] Re: Removing modular bay drive causes system freeze References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080121012156.3279.62136.malone@gangotri.ubuntu.com> ** Attachment added: "version.log" http://launchpadlibrarian.net/11455161/version.log -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From noel at devtech.com Mon Jan 21 01:22:18 2008 From: noel at devtech.com (Noel J. Bergman) Date: Mon, 21 Jan 2008 01:22:18 -0000 Subject: [Bug 12519] Re: Removing modular bay drive causes system freeze References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080121012218.6728.45846.malone@potassium.ubuntu.com> ** Attachment added: "dmesg.log" http://launchpadlibrarian.net/11455162/dmesg.log -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From noel at devtech.com Mon Jan 21 01:22:37 2008 From: noel at devtech.com (Noel J. Bergman) Date: Mon, 21 Jan 2008 01:22:37 -0000 Subject: [Bug 12519] Re: Removing modular bay drive causes system freeze References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080121012237.2772.54217.malone@gandwana.ubuntu.com> ** Attachment added: "lspci-vvnn.log" http://launchpadlibrarian.net/11455163/lspci-vvnn.log -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From noel at devtech.com Mon Jan 21 01:27:40 2008 From: noel at devtech.com (Noel J. Bergman) Date: Mon, 21 Jan 2008 01:27:40 -0000 Subject: [Bug 12519] Re: Removing modular bay drive causes system freeze References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080121012740.2676.18724.malone@gandwana.ubuntu.com> Hi Leann, Thank you for explaining what you need. Ben Collins wrote: "We would like to fix all bugs, but need users to test and help with debugging." Well, this bug is important to me, and I'm here to help as much as I can. Just let me know how I can help. :-) Need me to run an interim test build? Just give me the instructions. Whatever you need. I have attached the files as requested. I did not see anything in the kernel log that appeared to be "a useful error message prior to locking up." I can reproduce the lockup at will, and have check each of the reboots to see if there was anything logged prior to it. Nothing that I can see in any log. I apologize, because I had noticed the lack of logging earlier, but had not mentioned it in my bug report. -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From noel at devtech.com Mon Jan 21 01:33:47 2008 From: noel at devtech.com (Noel J. Bergman) Date: Mon, 21 Jan 2008 01:33:47 -0000 Subject: [Bug 12519] Re: Removing modular bay drive causes system freeze References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080121013347.6728.18656.malone@potassium.ubuntu.com> Would it help you if I provided the same attachments from the same T61p running Gutsy. where this works? -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From noel at devtech.com Mon Jan 21 02:03:47 2008 From: noel at devtech.com (Noel J. Bergman) Date: Mon, 21 Jan 2008 02:03:47 -0000 Subject: [Bug 12519] Re: Removing modular bay drive causes system freeze References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080121020347.3279.54756.malone@gangotri.ubuntu.com> > Another bit of data: with Gutsy and my ThinkPad T61p 6457-7WU, the hotswap bay shows up as 1:0:0:0; with Hardy, it shows up as 3:0:0:0 And with the latest changes to Hardy, it is showing up as 4:0:0:0. Is this shifting of the host ID related to the bug? -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From launchpad at chriseineke.com Mon Jan 21 04:21:44 2008 From: launchpad at chriseineke.com (chris_eineke) Date: Mon, 21 Jan 2008 04:21:44 -0000 Subject: [Bug 184730] Re: SATA drives' device nodes missing References: <20080121041614.3443.2050.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121042144.3443.94256.malone@gangotri.ubuntu.com> ** Attachment added: "lspcivvv.txt" http://launchpadlibrarian.net/11456136/lspcivvv.txt -- SATA drives' device nodes missing https://bugs.launchpad.net/bugs/184730 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From launchpad at chriseineke.com Mon Jan 21 04:21:35 2008 From: launchpad at chriseineke.com (chris_eineke) Date: Mon, 21 Jan 2008 04:21:35 -0000 Subject: [Bug 184730] Re: SATA drives' device nodes missing References: <20080121041614.3443.2050.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121042135.3443.59653.malone@gangotri.ubuntu.com> ** Attachment added: "dmesg.txt" http://launchpadlibrarian.net/11456135/dmesg.txt -- SATA drives' device nodes missing https://bugs.launchpad.net/bugs/184730 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From launchpad at chriseineke.com Mon Jan 21 04:22:07 2008 From: launchpad at chriseineke.com (chris_eineke) Date: Mon, 21 Jan 2008 04:22:07 -0000 Subject: [Bug 184730] Re: SATA drives' device nodes missing References: <20080121041614.3443.2050.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121042207.6574.42600.malone@potassium.ubuntu.com> ** Attachment added: "procinterrupts.txt" http://launchpadlibrarian.net/11456138/procinterrupts.txt -- SATA drives' device nodes missing https://bugs.launchpad.net/bugs/184730 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From launchpad at chriseineke.com Mon Jan 21 04:22:00 2008 From: launchpad at chriseineke.com (chris_eineke) Date: Mon, 21 Jan 2008 04:22:00 -0000 Subject: [Bug 184730] Re: SATA drives' device nodes missing References: <20080121041614.3443.2050.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121042200.3279.55468.malone@gangotri.ubuntu.com> ** Attachment added: "mdadm.txt" http://launchpadlibrarian.net/11456137/mdadm.txt -- SATA drives' device nodes missing https://bugs.launchpad.net/bugs/184730 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From launchpad at chriseineke.com Mon Jan 21 04:22:15 2008 From: launchpad at chriseineke.com (chris_eineke) Date: Mon, 21 Jan 2008 04:22:15 -0000 Subject: [Bug 184730] Re: SATA drives' device nodes missing References: <20080121041614.3443.2050.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121042215.2676.38480.malone@gandwana.ubuntu.com> ** Attachment added: "procversion.txt" http://launchpadlibrarian.net/11456139/procversion.txt -- SATA drives' device nodes missing https://bugs.launchpad.net/bugs/184730 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From launchpad at chriseineke.com Mon Jan 21 04:16:13 2008 From: launchpad at chriseineke.com (chris_eineke) Date: Mon, 21 Jan 2008 04:16:13 -0000 Subject: [Bug 184730] SATA drives' device nodes missing References: <20080121041614.3443.2050.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121041614.3443.2050.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image Overview ======== I have been running Ubuntu Gutsy and recently bought 3 500gb drives (one PATA, two SATA) and a Silicon Image SATA controller to prepare a software RAID5 on my system for my server. It is also running Ubuntu gutsy and I have run into a bit of a knack. Problem ======= As you can see in the output from dmesg, the kernel seems to recognize the partitions on the drives correctly (hdb, sda, sdb; I keep spare partition to account for variance in space), but a.) there are no correspond SATA device nodes in /dev for the partitions, b.) there is information about them /sys either, c.) /dev/hdb and /dev/hdb1 seem to be mixed up; the former doesn't have volume information, but the latter does, and d.) my RAID5 does not assemble correctly any more on the server. Remarkably, the array works just fine on my desktop that I used to build the array. I will attach the outputs of lspci -vvv, dmesg, mdadm -E , and vol_id to assist in debugging this issue. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- SATA drives' device nodes missing https://bugs.launchpad.net/bugs/184730 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From launchpad at chriseineke.com Mon Jan 21 04:22:24 2008 From: launchpad at chriseineke.com (chris_eineke) Date: Mon, 21 Jan 2008 04:22:24 -0000 Subject: [Bug 184730] Re: SATA drives' device nodes missing References: <20080121041614.3443.2050.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121042224.6574.50031.malone@potassium.ubuntu.com> ** Attachment added: "vol_id.txt" http://launchpadlibrarian.net/11456140/vol_id.txt -- SATA drives' device nodes missing https://bugs.launchpad.net/bugs/184730 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From launchpad at chriseineke.com Mon Jan 21 04:25:34 2008 From: launchpad at chriseineke.com (chris_eineke) Date: Mon, 21 Jan 2008 04:25:34 -0000 Subject: [Bug 184730] Re: SATA drives' device nodes missing References: <20080121041614.3443.2050.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121042534.3279.36102.malone@gangotri.ubuntu.com> The previous version of vol_id showed hda, which is not part of the array. I should have supplied hdb instead. Here's the correct version. ** Attachment added: "vol_id.txt" http://launchpadlibrarian.net/11456149/vol_id.txt -- SATA drives' device nodes missing https://bugs.launchpad.net/bugs/184730 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From launchpad at chriseineke.com Mon Jan 21 04:27:06 2008 From: launchpad at chriseineke.com (chris_eineke) Date: Mon, 21 Jan 2008 04:27:06 -0000 Subject: [Bug 184730] Re: SATA drives' device nodes missing References: <20080121041614.3443.2050.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121042706.3443.82434.malone@gangotri.ubuntu.com> ** Attachment added: "fdisk.txt" http://launchpadlibrarian.net/11456150/fdisk.txt -- SATA drives' device nodes missing https://bugs.launchpad.net/bugs/184730 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From launchpad at chriseineke.com Mon Jan 21 04:27:53 2008 From: launchpad at chriseineke.com (chris_eineke) Date: Mon, 21 Jan 2008 04:27:53 -0000 Subject: [Bug 184730] Re: SATA drives' device nodes missing References: <20080121041614.3443.2050.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121042753.6574.13616.malone@potassium.ubuntu.com> ** Attachment added: "procdevices.txt" http://launchpadlibrarian.net/11456153/procdevices.txt -- SATA drives' device nodes missing https://bugs.launchpad.net/bugs/184730 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From launchpad at chriseineke.com Mon Jan 21 04:30:43 2008 From: launchpad at chriseineke.com (chris_eineke) Date: Mon, 21 Jan 2008 04:30:43 -0000 Subject: [Bug 184730] Re: SATA drives' device nodes missing References: <20080121041614.3443.2050.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121043043.6574.97468.malone@potassium.ubuntu.com> ** Attachment added: "dev.txt" http://launchpadlibrarian.net/11456167/dev.txt -- SATA drives' device nodes missing https://bugs.launchpad.net/bugs/184730 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From launchpad at chriseineke.com Mon Jan 21 04:38:56 2008 From: launchpad at chriseineke.com (chris_eineke) Date: Mon, 21 Jan 2008 04:38:56 -0000 Subject: [Bug 184730] Re: SATA drives' device nodes missing References: <20080121041614.3443.2050.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121043857.3443.10632.malone@gangotri.ubuntu.com> * You will have noticed that I am running the -generic kernel. I thought the first source of error would have been the kernel and so I decided to run the exact same kernel on my server than on my desktop -- without much success. :-) * If I take the drives and the controller as they are and shove them into my desktop, the device nodes show up, and the array assembles fine. -- SATA drives' device nodes missing https://bugs.launchpad.net/bugs/184730 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From launchpad at chriseineke.com Mon Jan 21 04:40:47 2008 From: launchpad at chriseineke.com (chris_eineke) Date: Mon, 21 Jan 2008 04:40:47 -0000 Subject: [Bug 184730] Re: SATA drives' device nodes missing References: <20080121041614.3443.2050.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121044047.3279.61338.malone@gangotri.ubuntu.com> If you want to debug this hands-on, you can talk to me on irc at FreeNode in #kubuntu or #ubuntu. My nickname is sledge. -- SATA drives' device nodes missing https://bugs.launchpad.net/bugs/184730 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From gQuigs at gMail.com Mon Jan 21 04:56:46 2008 From: gQuigs at gMail.com (gQuigs) Date: Mon, 21 Jan 2008 04:56:46 -0000 Subject: [Bug 55686] Re: Missing C3 state - Centrino duo References: <20060808163619.9345.50381.malonedeb@gandwana.ubuntu.com> Message-ID: <20080121045646.2676.76046.malone@gandwana.ubuntu.com> Apologies if I got this wrong. "I see only C0, C1, and C2. Why don't the other C-states show? It's mostly a BIOS thing. Some BIOS hide C3/C4 when on AC power, and others show only C3 which is really a C4 underneath when on battery. Note that the 'max_cstate:C8' value in /proc/acpi/processor/*/power tells the maximum number of C-states the Linux kernel can handle, not the number of C-states implemented in your hardware." -http://www.lesswatts.org/projects/powertop/faq.php ** Changed in: linux-source-2.6.15 (Ubuntu) Status: New => Invalid -- Missing C3 state - Centrino duo https://bugs.launchpad.net/bugs/55686 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From mike at vee.net Mon Jan 21 07:08:58 2008 From: mike at vee.net (Mike Gratton) Date: Mon, 21 Jan 2008 07:08:58 -0000 Subject: [Bug 48932] Re: i915_wait_irq error: system hangs while running heavy graphics applications References: <20060608003437.3609.4293.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121070858.6574.48158.malone@potassium.ubuntu.com> Yes, this bug is still happening, albeit occasionally - it just happened on my X61s, Ubuntu 7.10 with Compiz as the WM and while the Lament OpenGL screensaver was running. ** Attachment added: "uname -a && dpkg -l *xorg* linux-* && lspci && cat /etc/X11/xorg.conf" http://launchpadlibrarian.net/11456986/48932-info.txt -- i915_wait_irq error: system hangs while running heavy graphics applications https://bugs.launchpad.net/bugs/48932 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From mike at vee.net Mon Jan 21 07:16:26 2008 From: mike at vee.net (Mike Gratton) Date: Mon, 21 Jan 2008 07:16:26 -0000 Subject: [Bug 48932] Re: i915_wait_irq error: system hangs while running heavy graphics applications References: <20060608003437.3609.4293.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121071626.2676.96170.malone@gandwana.ubuntu.com> Possibly related to i915 xorg driver, see: http://www.mail-archive.com /dri-devel at lists.sourceforge.net/msg29741.html -- i915_wait_irq error: system hangs while running heavy graphics applications https://bugs.launchpad.net/bugs/48932 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From noel at devtech.com Mon Jan 21 07:34:33 2008 From: noel at devtech.com (Noel J. Bergman) Date: Mon, 21 Jan 2008 07:34:33 -0000 Subject: [Bug 12519] Re: Removing modular bay drive causes system freeze References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080121073433.2772.88016.malone@gandwana.ubuntu.com> I just rebooted under Gutsy and updated it. Hotswapping still works with Gutsy, but it seems that I was wrong about the host ID being consistent. The host ID is shifting with Gutsy too. I'll modify the udev rules and scripts from http://thinkwiki.org/wiki/How_to_hotswap_UltraBay_devices#Scripts_for_hotswapping by passing the DEVPATH on the event, and adjusting the scripts to use it as necessary. -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From kabus.ingo+launchpad at gmail.com Mon Jan 21 08:06:56 2008 From: kabus.ingo+launchpad at gmail.com (Ing0R) Date: Mon, 21 Jan 2008 08:06:56 -0000 Subject: [Bug 183349] Re: package linux-image-generic 2.6.24.4.4 failed to install/upgrade: dependency problems - leaving unconfigured References: <20080115221431.30605.29448.malonedeb@gandwana.ubuntu.com> Message-ID: <20080121080656.3279.55407.malone@gangotri.ubuntu.com> There was not enough free space on my /boot partition. Apt-get should warn about that. -- package linux-image-generic 2.6.24.4.4 failed to install/upgrade: dependency problems - leaving unconfigured https://bugs.launchpad.net/bugs/183349 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From sevcsik at gmail.com Mon Jan 21 15:16:56 2008 From: sevcsik at gmail.com (=?utf-8?q?Sevcsik_Andr=C3=A1s?=) Date: Mon, 21 Jan 2008 15:16:56 -0000 Subject: [Bug 184822] kernel vga mode setting not working with 2.6.22 References: <20080121151656.3443.11513.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121151656.3443.11513.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-generic With linux-2.6.22-*, if I set a vga mode (with vga=792 for example) in grub (tried with menu.lst and within the boot menu too), the graphical splash screen shows and X works, but there's no virtual consoles (even boot messages don't appear). If I switch to virtual console with Ctrl+Alt+F*, a cursor is blinking in the corner at 640x480 res. If I switch to linux-2.6.20, everything works as expected. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- kernel vga mode setting not working with 2.6.22 https://bugs.launchpad.net/bugs/184822 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From leann at ubuntu.com Mon Jan 21 15:17:34 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Mon, 21 Jan 2008 15:17:34 -0000 Subject: [Bug 45295] Re: PCMCIA does not bring up eth1 during boot References: <20060517191118.15142.67878.malonedeb@gandwana.ubuntu.com> Message-ID: <20080121151734.6574.97588.malone@potassium.ubuntu.com> Thanks for testing and theupdate. Can you also attach your lspci -vvnn information? Thanks. -- PCMCIA does not bring up eth1 during boot https://bugs.launchpad.net/bugs/45295 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From bug-track at fisher-privat.net Mon Jan 21 15:53:27 2008 From: bug-track at fisher-privat.net (fishor) Date: Mon, 21 Jan 2008 15:53:27 -0000 Subject: [Bug 184822] Re: kernel vga mode setting not working with 2.6.22 References: <20080121151656.3443.11513.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121155327.2676.68029.malone@gandwana.ubuntu.com> Thank you for taking the time to report this bug and helping to make Ubuntu better. Unfortunately we can't fix it, because your description does not yet have enough information. 1. Please run the command "dmesg > dmesg.log" after a boot with vga=792 enabled and attach the resulting file "dmesg.log" to this bug report. 2. Please run the command "sudo lspci -vvnn > lspci-vvnn.log" and attach the resulting file "lspci-vvnn.log" to this bug report. ** Changed in: linux-meta (Ubuntu) Status: New => Incomplete -- kernel vga mode setting not working with 2.6.22 https://bugs.launchpad.net/bugs/184822 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From sevcsik at gmail.com Mon Jan 21 16:31:20 2008 From: sevcsik at gmail.com (=?utf-8?q?Sevcsik_Andr=C3=A1s?=) Date: Mon, 21 Jan 2008 16:31:20 -0000 Subject: [Bug 184822] Re: kernel vga mode setting not working with 2.6.22 References: <20080121151656.3443.11513.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121163121.6728.81838.malone@potassium.ubuntu.com> ** Attachment added: "Output of lspci" http://launchpadlibrarian.net/11460282/lspci.log -- kernel vga mode setting not working with 2.6.22 https://bugs.launchpad.net/bugs/184822 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From sevcsik at gmail.com Mon Jan 21 16:30:59 2008 From: sevcsik at gmail.com (=?utf-8?q?Sevcsik_Andr=C3=A1s?=) Date: Mon, 21 Jan 2008 16:30:59 -0000 Subject: [Bug 184822] Re: kernel vga mode setting not working with 2.6.22 References: <20080121151656.3443.11513.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121163059.3279.80590.malone@gangotri.ubuntu.com> ** Attachment added: "Output of dmesg" http://launchpadlibrarian.net/11460280/dmesg.log -- kernel vga mode setting not working with 2.6.22 https://bugs.launchpad.net/bugs/184822 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From sevcsik at gmail.com Mon Jan 21 16:30:10 2008 From: sevcsik at gmail.com (=?utf-8?q?Sevcsik_Andr=C3=A1s?=) Date: Mon, 21 Jan 2008 16:30:10 -0000 Subject: [Bug 184822] Re: kernel vga mode setting not working with 2.6.22 References: <20080121151656.3443.11513.malonedeb@gangotri.ubuntu.com> <20080121155327.2676.68029.malone@gandwana.ubuntu.com> Message-ID: <40495a670801210830s5068526ey6d9c2a4c0a1423d@mail.gmail.com> I attached them. 2008/1/21, fishor : > > Thank you for taking the time to report this bug and helping to make > Ubuntu better. Unfortunately we can't fix it, because your description > does not yet have enough information. > > 1. Please run the command "dmesg > dmesg.log" after a boot with vga=792 > enabled and attach the resulting file "dmesg.log" to this bug report. > 2. Please run the command "sudo lspci -vvnn > lspci-vvnn.log" and attach > the resulting file "lspci-vvnn.log" to this bug report. > > ** Changed in: linux-meta (Ubuntu) > Status: New => Incomplete > > -- > kernel vga mode setting not working with 2.6.22 > https://bugs.launchpad.net/bugs/184822 > You received this bug notification because you are a direct subscriber > of the bug. > -- Minden jót, Sevcsik András -- kernel vga mode setting not working with 2.6.22 https://bugs.launchpad.net/bugs/184822 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From leann at ubuntu.com Mon Jan 21 17:15:50 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Mon, 21 Jan 2008 17:15:50 -0000 Subject: [Bug 83290] Re: [gutsy] kernel 2.6.20 and 2.6.22 problem on asus centrino References: <20070204195735.4882.1300.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121171550.3443.83299.malone@gangotri.ubuntu.com> Thanks for testing and the feedback. Before we close the bug report, Alessandro, since you are the original bug reporter, can you confirm the new Hardy release resolves the issue for you as well? Thanks. -- [gutsy] kernel 2.6.20 and 2.6.22 problem on asus centrino https://bugs.launchpad.net/bugs/83290 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From leann at ubuntu.com Mon Jan 21 17:28:04 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Mon, 21 Jan 2008 17:28:04 -0000 Subject: [Bug 19749] Re: SATA HDD not recognized during Breezy Colony 4 install or Dapper Flight 3 or Edgy Eft or Feisty Fawn References: <20060113140316.21012.69844.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080121172805.3443.25534.malone@gangotri.ubuntu.com> Hi Aaron, Thanks for testing and the update. I'm glad to hear things are working with the newer Hardy Alpha release. Regarding keeping the bug open, we usually follow a different procedure. Once we get confirmation that the bug is resolved we mark the bug as "Fix Released" against the appropriate package. If it is the case that you notice a regression with subsequent releases, feel free to reopen the bug (ie change the status back to 'New') and post a comment about the regression. Those subscribed to the bug will be notified accordingly. Thanks. ** Changed in: linux (Ubuntu) Status: Incomplete => Fix Released -- SATA HDD not recognized during Breezy Colony 4 install or Dapper Flight 3 or Edgy Eft or Feisty Fawn https://bugs.launchpad.net/bugs/19749 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From simonwerner at gmail.com Mon Jan 21 17:38:15 2008 From: simonwerner at gmail.com (SimonWerner) Date: Mon, 21 Jan 2008 17:38:15 -0000 Subject: [Bug 45295] Re: PCMCIA does not bring up eth1 during boot References: <20060517191118.15142.67878.malonedeb@gandwana.ubuntu.com> Message-ID: <20080121173815.3443.37325.malone@gangotri.ubuntu.com> Here is my 'lspci -vvnn' ** Attachment added: "lspci -vvnn" http://launchpadlibrarian.net/11460997/lspci.txt -- PCMCIA does not bring up eth1 during boot https://bugs.launchpad.net/bugs/45295 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From simonwerner at gmail.com Mon Jan 21 17:39:24 2008 From: simonwerner at gmail.com (SimonWerner) Date: Mon, 21 Jan 2008 17:39:24 -0000 Subject: [Bug 45295] Re: PCMCIA does not bring up eth1 during boot References: <20060517191118.15142.67878.malonedeb@gandwana.ubuntu.com> Message-ID: <20080121173924.6728.74331.malone@potassium.ubuntu.com> The above 'lspci -vvnn' is for Gusty Gibbon, are there any changes for Hardy Heron? -- PCMCIA does not bring up eth1 during boot https://bugs.launchpad.net/bugs/45295 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From leann at ubuntu.com Mon Jan 21 17:45:21 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Mon, 21 Jan 2008 17:45:21 -0000 Subject: [Bug 33372] Re: Cannot wake up from suspend and hibernate References: <20060302085058.17498.86100.malonedeb@gangotri.ubuntu.com> Message-ID: <20080121174521.6574.42776.malone@potassium.ubuntu.com> Again, if you have hardware which differs from the original bug reporter, please open a new bug report. I just wanted to add an update to this report. Hardy Alpha2 and subsequent releases contain an updated version of the kernel. You can download and try the new Hardy Heron Alpha release from http://cdimage.ubuntu.com/releases/hardy/ . You should now be able to then test the new kernel via the LiveCD. Please note that you can only test Suspend from the LiveCD, not Hibernate. Tero (or anyone with the same hardware) if you can verify if this bug still exists or not and report back your results it would be appreciated. General information regarding the release can also be found here: http://www.ubuntu.com/testing/ . Thanks. -- Cannot wake up from suspend and hibernate https://bugs.launchpad.net/bugs/33372 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From lemsx1 at gmail.com Mon Jan 21 18:38:44 2008 From: lemsx1 at gmail.com (LuisMondesi) Date: Mon, 21 Jan 2008 18:38:44 -0000 Subject: [Bug 41209] Re: kernel oops after 2 hours References: <20060425010752.13024.56851.malonedeb@gandwana.ubuntu.com> Message-ID: <20080121183844.6728.19229.malone@potassium.ubuntu.com> Please close this bug... -- kernel oops after 2 hours https://bugs.launchpad.net/bugs/41209 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From leann at ubuntu.com Mon Jan 21 19:02:35 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Mon, 21 Jan 2008 19:02:35 -0000 Subject: [Bug 88530] Re: USB ports: connect-debounce failed, port disabled References: <20070227225858.22094.98179.malonedeb@gandwana.ubuntu.com> Message-ID: <20080121190236.3279.912.malone@gangotri.ubuntu.com> The Hardy Heron Alpha series was recently released. Alpha2 and subsequent releases contain an updated version of the kernel. You can download and try the new Hardy Heron Alpha release from http://cdimage.ubuntu.com/releases/hardy/ . You should be able to then test the new kernel via the LiveCD. If you can, please verify if this bug still exists or not and report back your results. General information regarding the release can also be found here: http://www.ubuntu.com/testing/ . -- USB ports: connect-debounce failed, port disabled https://bugs.launchpad.net/bugs/88530 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From benjamin.drung at gmail.com Mon Jan 21 23:04:59 2008 From: benjamin.drung at gmail.com (Benjamin Drung) Date: Mon, 21 Jan 2008 23:04:59 -0000 Subject: [Bug 88530] Re: USB ports: connect-debounce failed, port disabled References: <20070227225858.22094.98179.malonedeb@gandwana.ubuntu.com> Message-ID: <20080121230459.6728.63117.malone@potassium.ubuntu.com> I tested the current (2008-01-21) live cd from http://cdimage.ubuntu.com /daily-live/ . dmesg reportet no debounce failure. WLAN and Bluetooth are identified correct. So I think the problem is solved for my notebook. From time to time I will check if the debounce failure will come back. uname -a: Linux ubuntu 2.6.24-3-generic #1 SMP Thu Jan 3 22:50:33 UTC 2008 x86_64 GNU/Linux Notebook: Amilo Si 1520 with BIOS 1.10 -- USB ports: connect-debounce failed, port disabled https://bugs.launchpad.net/bugs/88530 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From begert at gmail.com Tue Jan 22 00:23:12 2008 From: begert at gmail.com (Bill Egert) Date: Tue, 22 Jan 2008 00:23:12 -0000 Subject: [Bug 48263] Re: [regression] Wired ethernet (VIA VT6102 Rhine II) and Wireless (RaLink 2500) no longer work under 6.06 (needs acpi=noirq blacklisting) References: <20060603190743.2224.85055.malonedeb@gangotri.ubuntu.com> Message-ID: <20080122002312.3443.42154.malone@gangotri.ubuntu.com> I tried to test with Kubuntu Alpha3, but I could only get a console login with the LiveCD. I will try again later. -- [regression] Wired ethernet (VIA VT6102 Rhine II) and Wireless (RaLink 2500) no longer work under 6.06 (needs acpi=noirq blacklisting) https://bugs.launchpad.net/bugs/48263 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From philip at cs.pitt.edu Tue Jan 22 06:15:33 2008 From: philip at cs.pitt.edu (Philip Ganchev) Date: Tue, 22 Jan 2008 06:15:33 -0000 Subject: [Bug 11149] Re: snd_cs46xx does not work after suspend/resume cycle References: <20060113131834.21012.29316.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080122061533.3279.26567.malone@gangotri.ubuntu.com> Yes, the same hardware and driver are on my Thinkpad A21m, and have the same problem on Feisty (7.10), Linux 2.6.20-16-generic #2 SMP. If it's an upstream bug, where should we submit a bug report? -- snd_cs46xx does not work after suspend/resume cycle https://bugs.launchpad.net/bugs/11149 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From peter at antoniac.info Tue Jan 22 08:48:39 2008 From: peter at antoniac.info (Peter Antoniac) Date: Tue, 22 Jan 2008 08:48:39 -0000 Subject: [Bug 46762] Re: IrDA kernel module oops on startup References: <20060526140255.17229.41169.malonedeb@gandwana.ubuntu.com> Message-ID: <20080122084839.3279.15003.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 46947 *** https://bugs.launchpad.net/bugs/46947 ** This bug has been marked a duplicate of bug 46947 Oops with IrDA in 2.6.15-23-686 -- IrDA kernel module oops on startup https://bugs.launchpad.net/bugs/46762 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From tuharsky at misbb.sk Tue Jan 22 09:27:42 2008 From: tuharsky at misbb.sk (tuharsky) Date: Tue, 22 Jan 2008 09:27:42 -0000 Subject: [Bug 33372] Re: Cannot wake up from suspend and hibernate References: <20060302085058.17498.86100.malonedeb@gangotri.ubuntu.com> Message-ID: <20080122092743.6728.91422.malone@potassium.ubuntu.com> With Gutsy, HP nx9105 with nVidia NV17 [GeForce4 450 Go 32M] rev.a3 I see the same results. With distributional driver, it works. With nVidia propietary one, it dosen't. -- Cannot wake up from suspend and hibernate https://bugs.launchpad.net/bugs/33372 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From colin at colino.net Tue Jan 22 10:24:29 2008 From: colin at colino.net (Colin Leroy) Date: Tue, 22 Jan 2008 10:24:29 -0000 Subject: [Bug 185025] Re: Coolermaster Xcraft 360 USB drive fails References: <20080122102253.25843.73244.malonedeb@gandwana.ubuntu.com> Message-ID: <20080122102429.25461.82750.malone@gandwana.ubuntu.com> The upstream commit is: http://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=b89ee19ae6c0b5a0d9facca780b53959fbadd123 -- Coolermaster Xcraft 360 USB drive fails https://bugs.launchpad.net/bugs/185025 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From colin at colino.net Tue Jan 22 10:22:53 2008 From: colin at colino.net (Colin Leroy) Date: Tue, 22 Jan 2008 10:22:53 -0000 Subject: [Bug 185025] Coolermaster Xcraft 360 USB drive fails References: <20080122102253.25843.73244.malonedeb@gandwana.ubuntu.com> Message-ID: <20080122102253.25843.73244.malonedeb@gandwana.ubuntu.com> Public bug reported: Hi, I'm facing this bug: http://bugzilla.kernel.org/show_bug.cgi?id=8639 on a Dapper server. Would it be possible to backport the fix found in this bugreport? Thanks. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: New -- Coolermaster Xcraft 360 USB drive fails https://bugs.launchpad.net/bugs/185025 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From matthias at puffin.ch Tue Jan 22 13:05:18 2008 From: matthias at puffin.ch (=?utf-8?b?bcOkdHR1?=) Date: Tue, 22 Jan 2008 13:05:18 -0000 Subject: [Bug 11149] Re: snd_cs46xx does not work after suspend/resume cycle References: <20060113131834.21012.29316.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080122130518.6728.41892.malone@potassium.ubuntu.com> Patch does not work. Neither manually unloading / loading snd-intel8x0 module; it is always in use.. This is xubuntu feisty. lsmod | grep snd snd_intel8x0 34332 1 I cannot identify the process using it, there is no name. Bug? I found out that there is "1" as soon as an x-session is started and "0" if not. Shutting down x & reload module works, which is not an option to me.. :m) -- snd_cs46xx does not work after suspend/resume cycle https://bugs.launchpad.net/bugs/11149 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From thesaltydog at gmail.com Tue Jan 22 13:08:48 2008 From: thesaltydog at gmail.com (Fabio Marzocca) Date: Tue, 22 Jan 2008 13:08:48 -0000 Subject: [Bug 24776] Re: ipw2100 error Fatal interrupt. Scheduling firmware restart. References: <20060113143045.21012.26338.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080122130848.3029.10426.malone@gangotri.ubuntu.com> I have an interesting behaviour to note here. I have found that I can connect to my office wireless WPA-PSK Access Point ONLY IF I put the laptop (IBM X31) close to a particular corner near the window during boot and net access. This corner is the FAREST in the office from the AP. Once connected, I caome back in my room and I stay connected all the day. This means that maybe the signal strenght is too high for the ipw2100 to connect WPA-PSK, and it needs to be reduced. Maybe useful to developers? -- ipw2100 error Fatal interrupt. Scheduling firmware restart. https://bugs.launchpad.net/bugs/24776 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From bjoern at boschman.de Tue Jan 22 14:14:37 2008 From: bjoern at boschman.de (jessy) Date: Tue, 22 Jan 2008 14:14:37 -0000 Subject: [Bug 37452] Re: fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100, Dell SASR5/i) References: <20060331083135.5415.666.malonedeb@gangotri.ubuntu.com> Message-ID: <20080122141438.3443.35326.malone@gangotri.ubuntu.com> Now it's official! Using 6.06.2 installer it's no longer possible to install a SUN X4100 at all. -- fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100, Dell SASR5/i) https://bugs.launchpad.net/bugs/37452 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From sevcsik at gmail.com Tue Jan 22 14:40:57 2008 From: sevcsik at gmail.com (=?utf-8?q?Sevcsik_Andr=C3=A1s?=) Date: Tue, 22 Jan 2008 14:40:57 -0000 Subject: [Bug 184822] Re: kernel vga mode setting not working with 2.6.22 References: <20080121151656.3443.11513.malonedeb@gangotri.ubuntu.com> Message-ID: <20080122144057.3443.38513.malone@gangotri.ubuntu.com> sorry, forgot tu use -vvnn for lspci, here it is again ** Attachment added: "lspci with -vvnn argument enabled" http://launchpadlibrarian.net/11477480/lspci_vvnn.log -- kernel vga mode setting not working with 2.6.22 https://bugs.launchpad.net/bugs/184822 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From coonj at rpi.edu Tue Jan 22 15:46:22 2008 From: coonj at rpi.edu (coonj) Date: Tue, 22 Jan 2008 15:46:22 -0000 Subject: [Bug 34155] Re: Suspend-To-Ram (S3) doesn't work on Dell Latitude C640 References: <20060308232941.29403.57547.malonedeb@gangotri.ubuntu.com> Message-ID: <20080122154622.25461.65926.malone@gandwana.ubuntu.com> I have a similar problem on a Fujitsu P7010D (w/ Intel Extreme graphics 2 chip), and was able to get the video back only if I initiated a reboot: - Successful suspend - on resume, mouse is visible but the screen is white/black/green stripes - If i bring up the "Quit" dialog (via Alt+Ctrl+Del), I can kind of see where the box is on the screen, and I know where to click for "Shutdown", so I do that - Immediately, the video comes back! Everything looks great, but I had initiated Shutdown for the to happen, so that is not a solution! But, I think it is worth mentioning that the video does come back during the Shutdown process, and it is almost immediate, so it is something that runs near the beginning of the shutdown script. -- Suspend-To-Ram (S3) doesn't work on Dell Latitude C640 https://bugs.launchpad.net/bugs/34155 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From mail2leu at arcor.de Tue Jan 22 16:53:43 2008 From: mail2leu at arcor.de (Leu) Date: Tue, 22 Jan 2008 16:53:43 -0000 Subject: [Bug 31440] Linux doesn't support ENE CB-710 SD card reader References: <20060214213807.2410.52669.malonedeb@gangotri.ubuntu.com> Message-ID: <20080122165343.6728.98180.malone@potassium.ubuntu.com> * Linux doesn't support ENE CB-710 SD card reader * Same problem in 2.6.24-4-generic (hardy heron, alpha). -- sdhci module and ENE CB-710 PCMCIA card reader https://bugs.launchpad.net/bugs/31440 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From mail2leu at arcor.de Tue Jan 22 16:59:34 2008 From: mail2leu at arcor.de (Leu) Date: Tue, 22 Jan 2008 16:59:34 -0000 Subject: [Bug 31440] SD Card Reader ENE 710 References: <20060214213807.2410.52669.malonedeb@gangotri.ubuntu.com> Message-ID: <20080122165934.6728.94903.malone@potassium.ubuntu.com> Same problem in 2.6.24-4-generic (hardy heron, alpha) SD Card Reader CB710 not supported. -- sdhci module and ENE CB-710 PCMCIA card reader https://bugs.launchpad.net/bugs/31440 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From fabian at gebert-hh.de Tue Jan 22 17:08:23 2008 From: fabian at gebert-hh.de (Fabus) Date: Tue, 22 Jan 2008 17:08:23 -0000 Subject: [Bug 69208] Re: Bug #42299 survives on upgrade from Dapper Drake to Edgy References: <20061030044059.17734.24190.malonedeb@gandwana.ubuntu.com> Message-ID: <20080122170824.6574.80284.malone@potassium.ubuntu.com> *** This bug is a duplicate of bug 42299 *** https://bugs.launchpad.net/bugs/42299 shouldn't that resume file also be updated if you change the swap- partition? I tried that and it did not work. I had to alter the file manually. -- Bug #42299 survives on upgrade from Dapper Drake to Edgy https://bugs.launchpad.net/bugs/69208 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber (via bug 42299). From rcaskey at uga.edu Tue Jan 22 19:08:03 2008 From: rcaskey at uga.edu (Rob Caskey) Date: Tue, 22 Jan 2008 19:08:03 -0000 Subject: [Bug 185149] NVidia driver doesn't work with 3007WFP References: <20080122190803.3443.21795.malonedeb@gangotri.ubuntu.com> Message-ID: <20080122190803.3443.21795.malonedeb@gangotri.ubuntu.com> Public bug reported: Auto-detection of the 3007WFP fails, and specifying a mode-line doesn't do any better. Xorg starts, there is a strange flickering, and then I can't get back to my text terminal. I believe this is a regression as I have been running gutsy for weeks. It used to be that Xorg would start with an incorrect resolution and then xrandr would change it to the proper 2560x1600 after gdm log-in, but now no love. Section "Device" Identifier "nVidia Corporation G80 [GeForce 8800 GTS]" Driver "nvidia" Option "NoLogo" "True" EndSection Section "Monitor" Identifier "DELL 3007WFP" ModelName "DELL 3007WFP" Gamma 1.21 ModeLine "2560x1600 at 60" 348.2 2560 2752 3032 3504 1600 1601 1604 1656 -hsync +vsync EndSection Section "Screen" Identifier "Default Screen" Device "nVidia Corporation G80 [GeForce 8800 GTS]" Subsection "Display" Depth 24 Modes "2560x1600 at 60" EndSubsection EndSection I also tried another with similar results: Section "Monitor" DisplaySize 646 404 HorizSync 30-100 Identifier "Monitor[0]" ModelName "DELL 3007WFP" Option "DPMS" VendorName "DELL" VertRefresh 56-76 Modeline "2560x1600" 268 2560 2608 2640 2720 1600 1603 1609 1646 EndSection X Window System Version 1.3.0 Release Date: 19 April 2007 X Protocol Version 11, Revision 0, Release 1.3 Build Operating System: Linux Ubuntu (xorg-server 2:1.3.0.0.dfsg-12ubuntu8.3) Current Operating System: Linux rcaskey-desktop 2.6.22-14-generic #1 SMP Tue Dec 18 05:28:27 UTC 2007 x86_64 Build Date: 18 January 2008 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 22 10:18:39 2008 (++) Using config file: "/root/min.xorg.conf" (WW) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "" (**) | |-->Device "nVidia Corporation G80 [GeForce 8800 GTS]" (WW) No monitor specified for screen "Default Screen". Using a default monitor configuration. (==) |-->Input Device "" (==) |-->Input Device "" (WW) The core pointer device wasn't specified explicitly in the layout. Using the default mouse configuration. (WW) The core keyboard device wasn't specified explicitly in the layout. Using the default keyboard configuration. (WW) No FontPath specified. Using compiled-in default. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) RgbPath set to "/etc/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Loader magic: 0x7cdb20 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.2 X.Org XInput driver : 0.7 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.2 (--) using VT number 2 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,29e0 card 1028,0214 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,29e1 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:06:0: chip 8086,29e9 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:1a:0: chip 8086,2937 card 1028,0214 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1a:1: chip 8086,2938 card 1028,0214 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1a:2: chip 8086,2939 card 1028,0214 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1a:7: chip 8086,293c card 1028,0214 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1b:0: chip 8086,293e card 1028,0214 rev 02 class 04,03,00 hdr 00 (II) PCI: 00:1c:0: chip 8086,2940 card 0000,0000 rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1c:5: chip 8086,294a card 0000,0000 rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1d:0: chip 8086,2934 card 1028,0214 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,2935 card 1028,0214 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,2936 card 1028,0214 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,293a card 1028,0214 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 92 class 06,04,01 hdr 01 (II) PCI: 00:1f:0: chip 8086,2916 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:2: chip 8086,2922 card 1028,0214 rev 02 class 01,06,01 hdr 00 (II) PCI: 00:1f:3: chip 8086,2930 card 1028,0214 rev 02 class 0c,05,00 hdr 00 (II) PCI: 01:00:0: chip 10de,040e card 10de,0474 rev a1 class 03,00,00 hdr 00 (II) PCI: 04:00:0: chip 14e4,167a card 1028,0214 rev 02 class 02,00,00 hdr 00 (II) PCI: 05:04:0: chip 11c1,5811 card 1028,8010 rev 61 class 0c,00,10 hdr 00 (II) PCI: End of PCI scan (II) Intel Bridge workaround enabled (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xfa000000 - 0xfeafffff (0x4b00000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:6:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared) (II) PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:28:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 3 non-prefetchable memory range: [0] -1 0 0xf9f00000 - 0xf9ffffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 4: bridge is at (0:28:5), (0,4,4), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 4 non-prefetchable memory range: [0] -1 0 0xf9e00000 - 0xf9efffff (0x100000) MX[B] (II) Subtractive PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:30:0), (0,5,5), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 5 non-prefetchable memory range: [0] -1 0 0xf9d00000 - 0xf9dfffff (0x100000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) nVidia Corporation unknown chipset (0x040e) rev 161, Mem @ 0xfd000000/24, 0xd0000000/28, 0xfa000000/25, I/O @ 0xdc80/7, BIOS @ 0xfea00000/17 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xf9dff000 - 0xf9dfffff (0x1000) MX[B] [1] -1 0 0xf9ef0000 - 0xf9efffff (0x10000) MX[B] [2] -1 0 0xfebfbb00 - 0xfebfbbff (0x100) MX[B] [3] -1 0 0xff970000 - 0xff9707ff (0x800) MX[B] [4] -1 0 0xff980800 - 0xff980bff (0x400) MX[B] [5] -1 0 0xfebfc000 - 0xfebfffff (0x4000) MX[B] [6] -1 0 0xfebfbc00 - 0xfebfbfff (0x400) MX[B] [7] -1 0 0xfea00000 - 0xfea1ffff (0x20000) MX[B](B) [8] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[B](B) [9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [11] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [12] -1 0 0x0000fec0 - 0x0000fedf (0x20) IX[B] [13] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B] [14] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B] [15] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B] [16] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B] [17] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [18] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [19] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [20] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B] [21] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B] [22] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [23] -1 0 0x0000dc80 - 0x0000dcff (0x80) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf9dff000 - 0xf9dfffff (0x1000) MX[B] [1] -1 0 0xf9ef0000 - 0xf9efffff (0x10000) MX[B] [2] -1 0 0xfebfbb00 - 0xfebfbbff (0x100) MX[B] [3] -1 0 0xff970000 - 0xff9707ff (0x800) MX[B] [4] -1 0 0xff980800 - 0xff980bff (0x400) MX[B] [5] -1 0 0xfebfc000 - 0xfebfffff (0x4000) MX[B] [6] -1 0 0xfebfbc00 - 0xfebfbfff (0x400) MX[B] [7] -1 0 0xfea00000 - 0xfea1ffff (0x20000) MX[B](B) [8] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[B](B) [9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [11] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [12] -1 0 0x0000fec0 - 0x0000fedf (0x20) IX[B] [13] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B] [14] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B] [15] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B] [16] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B] [17] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [18] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [19] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [20] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B] [21] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B] [22] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [23] -1 0 0x0000dc80 - 0x0000dcff (0x80) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf9dff000 - 0xf9dfffff (0x1000) MX[B] [5] -1 0 0xf9ef0000 - 0xf9efffff (0x10000) MX[B] [6] -1 0 0xfebfbb00 - 0xfebfbbff (0x100) MX[B] [7] -1 0 0xff970000 - 0xff9707ff (0x800) MX[B] [8] -1 0 0xff980800 - 0xff980bff (0x400) MX[B] [9] -1 0 0xfebfc000 - 0xfebfffff (0x4000) MX[B] [10] -1 0 0xfebfbc00 - 0xfebfbfff (0x400) MX[B] [11] -1 0 0xfea00000 - 0xfea1ffff (0x20000) MX[B](B) [12] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[B](B) [13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [14] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [18] -1 0 0x0000fec0 - 0x0000fedf (0x20) IX[B] [19] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B] [20] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B] [21] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B] [22] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B] [23] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [24] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [25] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [26] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B] [27] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B] [28] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [29] -1 0 0x0000dc80 - 0x0000dcff (0x80) IX[B](B) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules//libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.1 (II) NVIDIA GLX Module 100.14.19 Wed Sep 12 14:51:24 PDT 2007 (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.3.0, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "nvidia" (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.2.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.7 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.2.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.7 (II) NVIDIA dlloader X Driver 100.14.19 Wed Sep 12 14:10:47 PDT 2007 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset NVIDIA GPU found (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Loading /usr/lib/xorg/modules//libwfb.so (II) Module wfb: vendor="NVIDIA Corporation" compiled for 7.1.99.2, module version = 1.0.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac"(II) Module already built-in (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf9dff000 - 0xf9dfffff (0x1000) MX[B] [5] -1 0 0xf9ef0000 - 0xf9efffff (0x10000) MX[B] [6] -1 0 0xfebfbb00 - 0xfebfbbff (0x100) MX[B] [7] -1 0 0xff970000 - 0xff9707ff (0x800) MX[B] [8] -1 0 0xff980800 - 0xff980bff (0x400) MX[B] [9] -1 0 0xfebfc000 - 0xfebfffff (0x4000) MX[B] [10] -1 0 0xfebfbc00 - 0xfebfbfff (0x400) MX[B] [11] -1 0 0xfea00000 - 0xfea1ffff (0x20000) MX[B](B) [12] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[B](B) [13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [14] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [18] -1 0 0x0000fec0 - 0x0000fedf (0x20) IX[B] [19] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B] [20] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B] [21] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B] [22] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B] [23] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [24] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [25] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [26] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B] [27] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B] [28] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [29] -1 0 0x0000dc80 - 0x0000dcff (0x80) IX[B](B) (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf9dff000 - 0xf9dfffff (0x1000) MX[B] [5] -1 0 0xf9ef0000 - 0xf9efffff (0x10000) MX[B] [6] -1 0 0xfebfbb00 - 0xfebfbbff (0x100) MX[B] [7] -1 0 0xff970000 - 0xff9707ff (0x800) MX[B] [8] -1 0 0xff980800 - 0xff980bff (0x400) MX[B] [9] -1 0 0xfebfc000 - 0xfebfffff (0x4000) MX[B] [10] -1 0 0xfebfbc00 - 0xfebfbfff (0x400) MX[B] [11] -1 0 0xfea00000 - 0xfea1ffff (0x20000) MX[B](B) [12] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[B](B) [13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [14] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [21] -1 0 0x0000fec0 - 0x0000fedf (0x20) IX[B] [22] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B] [23] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B] [24] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B] [25] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B] [26] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [27] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [28] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [29] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B] [30] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B] [31] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [32] -1 0 0x0000dc80 - 0x0000dcff (0x80) IX[B](B) [33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "NoLogo" "True" (**) NVIDIA(0): Option "TwinView" "True" (**) NVIDIA(0): Enabling RENDER acceleration (WW) NVIDIA(0): No TwinView "MetaModes" specified; will fall back to Display (WW) NVIDIA(0): SubSection modes. (**) NVIDIA(0): TwinView enabled (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU Quadro FX 570 (G84GL) at PCI:1:0:0 (GPU-0) (--) NVIDIA(0): Memory: 262144 kBytes (--) NVIDIA(0): VideoBIOS: 60.84.63.00.11 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on Quadro FX 570 at PCI:1:0:0: (--) NVIDIA(0): DELL3007WFPHC (DFP-1) (--) NVIDIA(0): DELL3007WFPHC (DFP-1): 330.0 MHz maximum pixel clock (--) NVIDIA(0): DELL3007WFPHC (DFP-1): Internal Dual Link TMDS (WW) NVIDIA(0): TwinView requested, but only 1 display devices found. (II) NVIDIA(0): Assigned Display Device: DFP-1 (WW) NVIDIA(0): No valid modes for "2560x1600 at 60"; removing. (WW) NVIDIA(0): (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode (WW) NVIDIA(0): "nvidia-auto-select". (WW) NVIDIA(0): (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select" (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1600 (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling (WW) NVIDIA(0): UBB. (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xfa000000 - 0xfbffffff (0x2000000) MX[B] [1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B] [2] 0 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B] [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xf9dff000 - 0xf9dfffff (0x1000) MX[B] [8] -1 0 0xf9ef0000 - 0xf9efffff (0x10000) MX[B] [9] -1 0 0xfebfbb00 - 0xfebfbbff (0x100) MX[B] [10] -1 0 0xff970000 - 0xff9707ff (0x800) MX[B] [11] -1 0 0xff980800 - 0xff980bff (0x400) MX[B] [12] -1 0 0xfebfc000 - 0xfebfffff (0x4000) MX[B] [13] -1 0 0xfebfbc00 - 0xfebfbfff (0x400) MX[B] [14] -1 0 0xfea00000 - 0xfea1ffff (0x20000) MX[B](B) [15] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[B](B) [16] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [17] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [21] 0 0 0x0000dc80 - 0x0000dcff (0x80) IX[B] [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [24] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [25] -1 0 0x0000fec0 - 0x0000fedf (0x20) IX[B] [26] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B] [27] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B] [28] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B] [29] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B] [30] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [31] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [32] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [33] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B] [34] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B] [35] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [36] -1 0 0x0000dc80 - 0x0000dcff (0x80) IX[B](B) [37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [38] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) NVIDIA(0): Initialized GART. (II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not (II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option (II) NVIDIA(0): may not be set correctly. When the ACPI daemon is (II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI (II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X (II) NVIDIA(0): Config Options in the README. (II) NVIDIA(0): Setting mode "nvidia-auto-select" (--) NVIDIA(0): No video decoder detected (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (II) Loading extension NV-CONTROL (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension XAccessControlExtension (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (WW) : No Device specified, looking for one... (II) : Setting Device option to "/dev/input/mice" (--) : Device: "/dev/input/mice" (==) : Protocol: "Auto" (**) Option "CorePointer" (**) : Core Pointer (==) : Emulate3Buttons, Emulate3Timeout: 50 (**) : ZAxisMapping: buttons 4 and 5 (**) : Buttons: 9 (**) : Sensitivity: 1 (**) Option "CoreKeyboard" (**) : Core Keyboard (**) Option "Protocol" "standard" (**) : Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) : XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) : XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) : XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) : CustomKeycodes disabled (II) XINPUT: Adding extended input device "" (type: KEYBOARD) (II) XINPUT: Adding extended input device "" (type: MOUSE) (--) : PnP-detected protocol: "ExplorerPS/2" (II) : ps2EnableDataReporting: succeeded ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- NVidia driver doesn't work with 3007WFP https://bugs.launchpad.net/bugs/185149 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From macoafi at gmail.com Tue Jan 22 20:05:33 2008 From: macoafi at gmail.com (Mackenzie Morgan) Date: Tue, 22 Jan 2008 20:05:33 -0000 Subject: [Bug 37784] Re: sky2 ethernet driver is freezing on big upload References: <20060402235408.5441.13560.malonedeb@gangotri.ubuntu.com> Message-ID: <20080122200533.6102.98112.malone@potassium.ubuntu.com> It seems to work properly in Gutsy. Can anyone else confirm that the Gutsy kernel has a properly working version of the driver? -- sky2 ethernet driver is freezing on big upload https://bugs.launchpad.net/bugs/37784 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From gene.cavanaugh at gmail.com Tue Jan 22 21:13:38 2008 From: gene.cavanaugh at gmail.com (Gene Cavanaugh) Date: Tue, 22 Jan 2008 21:13:38 -0000 Subject: [Bug 185170] kernel update kills Google wifi References: <20080122211338.6728.70458.malonedeb@potassium.ubuntu.com> Message-ID: <20080122211338.6728.70458.malonedeb@potassium.ubuntu.com> Public bug reported: Binary package hint: kernel-image-2.6.15-26-386-di Since none of the selections agree with the displayed kernel on bootup, use the information above with caution. On Ubuntu 6.06, every kernel update since 2.6.15-25-386 has killed my wifi ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: New -- kernel update kills Google wifi https://bugs.launchpad.net/bugs/185170 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From nico at veenkamp.nl Tue Jan 22 21:41:28 2008 From: nico at veenkamp.nl (Nico Veenkamp) Date: Tue, 22 Jan 2008 21:41:28 -0000 Subject: [Bug 185172] [DAPPER] kernel update to 2.6.15.51 on server causes kernel panic References: <20080122214128.3443.42037.malonedeb@gangotri.ubuntu.com> Message-ID: <20080122214128.3443.42037.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-source-2.6.15 I did a dist-upgrade of my DAPPER LTS lamp server and it received also a new kernel. After a reboot the server halted with a kernel panic due to not enough memory for the RAMDISK. This is a system with 2Gb RAM. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: New -- [DAPPER] kernel update to 2.6.15.51 on server causes kernel panic https://bugs.launchpad.net/bugs/185172 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From nico at veenkamp.nl Tue Jan 22 21:59:20 2008 From: nico at veenkamp.nl (Nico Veenkamp) Date: Tue, 22 Jan 2008 21:59:20 -0000 Subject: [Bug 185172] Re: [DAPPER] kernel update to 2.6.15.51 on server causes kernel panic References: <20080122214128.3443.42037.malonedeb@gangotri.ubuntu.com> Message-ID: <20080122215921.3443.28734.malone@gangotri.ubuntu.com> My bad. It turns out that my /boot is out of memory. -- [DAPPER] kernel update to 2.6.15.51 on server causes kernel panic https://bugs.launchpad.net/bugs/185172 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From roelhuybrechts at skynet.be Tue Jan 22 22:09:53 2008 From: roelhuybrechts at skynet.be (Roel Huybrechts) Date: Tue, 22 Jan 2008 22:09:53 -0000 Subject: [Bug 185172] Re: [DAPPER] kernel update to 2.6.15.51 on server causes kernel panic References: <20080122214128.3443.42037.malonedeb@gangotri.ubuntu.com> Message-ID: <20080122220953.6728.88114.malone@potassium.ubuntu.com> Closed after reporter request. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: New => Invalid -- [DAPPER] kernel update to 2.6.15.51 on server causes kernel panic https://bugs.launchpad.net/bugs/185172 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From jjalocha at gmail.com Tue Jan 22 22:15:18 2008 From: jjalocha at gmail.com (Jerzy Jalocha N) Date: Tue, 22 Jan 2008 22:15:18 -0000 Subject: [Bug 59626] Re: Ubuntu Dapper can't be installed References: <20060909100601.16587.85529.malonedeb@gangotri.ubuntu.com> Message-ID: <20080122221519.6574.93055.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 90271 *** https://bugs.launchpad.net/bugs/90271 ** This bug has been marked a duplicate of bug 90271 Regression: RealTek 8139 hard-locks system on installation/modprobe (affects Averatec, Philips laptops) -- Ubuntu Dapper can't be installed https://bugs.launchpad.net/bugs/59626 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From jjalocha at gmail.com Tue Jan 22 22:37:52 2008 From: jjalocha at gmail.com (Jerzy Jalocha N) Date: Tue, 22 Jan 2008 22:37:52 -0000 Subject: [Bug 48456] Re: kubuntu 6.06 LTS does not support Realtek 8139 network card References: <20060605021834.4978.67001.malonedeb@gandwana.ubuntu.com> Message-ID: <20080122223752.25843.56193.malone@gandwana.ubuntu.com> Is this a duplicate of Bug #90271 ? -- kubuntu 6.06 LTS does not support Realtek 8139 network card https://bugs.launchpad.net/bugs/48456 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From rayhmeyer at charter.net Wed Jan 23 02:29:11 2008 From: rayhmeyer at charter.net (Ray_M_From_MO) Date: Wed, 23 Jan 2008 02:29:11 -0000 Subject: [Bug 177920] Re: Music Player Lockups (Banshee, Rythmbox, VLC) References: <20071221165058.9301.30954.malonedeb@gandwana.ubuntu.com> Message-ID: <20080123022911.25461.61423.malone@gandwana.ubuntu.com> OK, All is well again. Never saw any alsa/sound updates, but after going through a few recent updates have tested all my sound/video packages and all seems back to normal now. Sound control is workable, although it seems to be a bit muted compared to before issue. -- Music Player Lockups (Banshee, Rythmbox, VLC) https://bugs.launchpad.net/bugs/177920 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From rayhmeyer at charter.net Wed Jan 23 02:25:21 2008 From: rayhmeyer at charter.net (Ray_M_From_MO) Date: Wed, 23 Jan 2008 02:25:21 -0000 Subject: [Bug 62995] Re: Linux doesnt support ENE CB-712 SD card reader References: <20060929150123.2244.82060.malonedeb@gangotri.ubuntu.com> Message-ID: <20080123022522.3279.74108.malone@gangotri.ubuntu.com> Well, sort of Hooray and sort of not. I have a Sony Memory Stick inserted into the reader and nothing seems to show up. Am attaching my lspci -v and dmesg results. From comments I see on the forums, the fix may be working fine with SD Cards (don't have any handy to test at the moment), but Memory Sticks still are invisible. dmesg results are first in the text file, followed by the lspci results. Both results are preceeded by a few lines of all '*'. ** Attachment added: "dmesg & lspci results" http://launchpadlibrarian.net/11490340/dmesg_20080122.txt -- Linux doesnt support ENE CB-712 SD card reader https://bugs.launchpad.net/bugs/62995 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From alessandro.pascali at gmail.com Wed Jan 23 08:58:35 2008 From: alessandro.pascali at gmail.com (Alessandro Pascali) Date: Wed, 23 Jan 2008 08:58:35 -0000 Subject: [Bug 83290] Re: [gutsy] kernel 2.6.20 and 2.6.22 problem on asus centrino References: <20070204195735.4882.1300.malonedeb@gangotri.ubuntu.com> Message-ID: <20080123085835.13930.18240.malone@potassium.ubuntu.com> OK, for now its impossible for me to upgrade and test hardy heron (i'm sorry, but its exams period, and i need that all work simply out of the box) As early as i can, i test if the solution is here! -- [gutsy] kernel 2.6.20 and 2.6.22 problem on asus centrino https://bugs.launchpad.net/bugs/83290 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From leann at ubuntu.com Wed Jan 23 11:09:52 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Wed, 23 Jan 2008 11:09:52 -0000 Subject: [Bug 45295] Re: PCMCIA does not bring up eth1 during boot References: <20060517191118.15142.67878.malonedeb@gandwana.ubuntu.com> Message-ID: <20080123110953.13930.46115.launchpad@potassium.ubuntu.com> ** Changed in: linux (Ubuntu) Importance: Undecided => Medium Assignee: (unassigned) => Ubuntu Kernel Team (ubuntu-kernel-team) Status: Incomplete => Triaged -- PCMCIA does not bring up eth1 during boot https://bugs.launchpad.net/bugs/45295 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From harry at ijscoboer.nl Wed Jan 23 11:40:33 2008 From: harry at ijscoboer.nl (harrydb) Date: Wed, 23 Jan 2008 11:40:33 -0000 Subject: [Bug 183174] Re: Tickless idle not working on AMD Turion 64 X2 (inspiron laptop) References: <20080115130751.30605.85385.malonedeb@gandwana.ubuntu.com> Message-ID: <20080123114034.25843.67936.launchpad@gandwana.ubuntu.com> ** Also affects: linux-source-2.6.24 (Ubuntu) Importance: Undecided Status: New -- Tickless idle not working on AMD Turion 64 X2 (inspiron laptop) https://bugs.launchpad.net/bugs/183174 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From themuso at themuso.com Wed Jan 23 12:25:25 2008 From: themuso at themuso.com (Luke Yelavich) Date: Wed, 23 Jan 2008 12:25:25 -0000 Subject: [Bug 39007] Re: ES1866/ES1878/ES1879 (non-PnP ISA) sound chipsets are not activated on boot by default References: <20060410143008.24486.80616.malonedeb@gangotri.ubuntu.com> Message-ID: <20080123122525.3029.28300.malone@gangotri.ubuntu.com> Has there been any thought of writing a utility just to handle these non-pnp ISA cards, using some of the code from alsaconf as a base? I just so happen to have a box at home with ISA slots, and could quite easily have a look for, and pick up, a non-PNP ISA sound card, for testing. I would also be happy to write such a utility, using the ISA code from alsaconf as a base. Thoughts? -- ES1866/ES1878/ES1879 (non-PnP ISA) sound chipsets are not activated on boot by default https://bugs.launchpad.net/bugs/39007 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From nestorac at gmail.com Wed Jan 23 16:56:12 2008 From: nestorac at gmail.com (=?utf-8?q?N=C3=A9stor_Amigo_Cairo?=) Date: Wed, 23 Jan 2008 16:56:12 -0000 Subject: [Bug 185410] SATA error: no sense translation for error 0x20 References: <20080123165612.25461.95607.malonedeb@gandwana.ubuntu.com> Message-ID: <20080123165612.25461.95607.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image I'm using Ubuntu Dapper 6.06.2 Completely updated, except that I'm not able to boot the last kernel (it doesn't recognize the root FS, I will post it later). My computer is a Pentium 4 2,8Ghz, SATA Disk (80GiB), 512 MiB DDR. The motherboard is an Intel one, I post here the lspci info: 0000:00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02) 0000:00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02) 0000:00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) 0000:00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) 0000:00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) 0000:00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) 0000:00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) 0000:00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02) 0000:00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) 0000:00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] 0000:02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:02:04.0 Ethernet controller: Atheros Communications, Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor (rev 01) 0000:02:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet Controller (rev 02) ==== My hard drive is as follows: smartctl version 5.34 [i686-pc-linux-gnu] Copyright (C) 2002-5 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Device: ATA ST380013AS Version: 3.18 In Linux, SATA disks accessed via libata are not currently supported by smartmontools. By the time you read this, support may have been added in recent kernels. Try an additional '-d ata' argument. root at ubuntu:~# smartctl -i -d ata /dev/sda smartctl version 5.34 [i686-pc-linux-gnu] Copyright (C) 2002-5 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST380013AS Serial Number: 3JV9DEV1 Firmware Version: 3.18 User Capacity: 80,026,361,856 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Wed Jan 23 17:48:50 2008 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled == My CD-ROM drive is as follows (it doesn't work perfectly, since it's a bit old, but anyways, it's empty, so this shouldn't be happening) LG gcr-8523b (52X max) I'm getting this error log CONTINUOSLY (my log having been more than 100MB long) The strange thing is that everything appears to work perfectly. I should test with latest kernel [17186207.696000] ata2: PIO error [17186207.696000] ata2: no sense translation for error 0x20 [17186207.696000] ata2: no sense translation for status: 0x51 [17186207.696000] ata2: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 [17186207.696000] sr0: CDROM (ioctl) error, command: <6>Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 00 [17186207.696000] sr: Current [descriptor]: sense key: Medium Error [17186207.696000] Additional sense: Unrecovered read error - auto reallocate failed [17186207.696000] ata2: PIO error [17186207.696000] ata2: no sense translation for error 0x20 [17186207.696000] ata2: no sense translation for status: 0x51 [17186207.696000] ata2: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 ... [many more times] ... [17186209.756000] sr0: CDROM (ioctl) error, command: <6>Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 40 [17186209.756000] sr: Current [descriptor]: sense key: Medium Error [17186209.756000] Additional sense: Unrecovered read error - auto reallocate failed [17186209.756000] ata2: PIO error [17186209.756000] ata2: no sense translation for error 0x20 [17186209.756000] ata2: no sense translation for status: 0x51 [17186209.756000] ata2: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 [17186209.756000] ata2: PIO error [17186209.756000] ata2: no sense translation for error 0x20 [17186209.756000] ata2: no sense translation for status: 0x51 [17186209.756000] ata2: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 [17186209.756000] ata2: PIO error [17186209.756000] ata2: no sense translation for error 0x20 [17186209.756000] ata2: no sense translation for status: 0x51 [17186209.756000] ata2: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 [17186209.756000] sr0: CDROM (ioctl) error, command: <6>Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 00 [17186209.756000] sr: Current [descriptor]: sense key: Medium Error [17186209.756000] Additional sense: Unrecovered read error - auto reallocate failed [17186209.756000] ata2: PIO error [17186209.756000] ata2: no sense translation for error 0x20 [17186209.756000] ata2: no sense translation for status: 0x51 [17186209.756000] ata2: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 ... [many many more times, almost infinite] ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- SATA error: no sense translation for error 0x20 https://bugs.launchpad.net/bugs/185410 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From nenolod at nenolod.net Wed Jan 23 19:04:44 2008 From: nenolod at nenolod.net (William Pitcock) Date: Wed, 23 Jan 2008 19:04:44 -0000 Subject: [Bug 39007] Re: ES1866/ES1878/ES1879 (non-PnP ISA) sound chipsets are not activated on boot by default References: <20060410143008.24486.80616.malonedeb@gangotri.ubuntu.com> <20080123122525.3029.28300.malone@gangotri.ubuntu.com> Message-ID: <1201115084.3604.75.camel@petrie> Hi, I'll be happy to help with writing the utility, but I don't have any working machines with ISA anymore. On Wed, 2008-01-23 at 12:25 +0000, Luke Yelavich wrote: > Has there been any thought of writing a utility just to handle these > non-pnp ISA cards, using some of the code from alsaconf as a base? > > I just so happen to have a box at home with ISA slots, and could quite > easily have a look for, and pick up, a non-PNP ISA sound card, for > testing. I would also be happy to write such a utility, using the ISA > code from alsaconf as a base. > > Thoughts? > -- ES1866/ES1878/ES1879 (non-PnP ISA) sound chipsets are not activated on boot by default https://bugs.launchpad.net/bugs/39007 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From derjames at tutopia.com Wed Jan 23 19:06:20 2008 From: derjames at tutopia.com (derjames) Date: Wed, 23 Jan 2008 19:06:20 -0000 Subject: [Bug 48456] Re: kubuntu 6.06 LTS does not support Realtek 8139 network card References: <20060605021834.4978.67001.malonedeb@gandwana.ubuntu.com> Message-ID: <20080123190620.13930.5253.malone@potassium.ubuntu.com> @Jerzy Yes, it seems to be the same... -- kubuntu 6.06 LTS does not support Realtek 8139 network card https://bugs.launchpad.net/bugs/48456 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From peter at hartmann.org Wed Jan 23 20:40:25 2008 From: peter at hartmann.org (piotr) Date: Wed, 23 Jan 2008 20:40:25 -0000 Subject: [Bug 37765] Re: [bcm43xx] No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. References: <20060402194212.5415.86136.malonedeb@gangotri.ubuntu.com> Message-ID: <20080123204025.3279.65495.malone@gangotri.ubuntu.com> thanks dennda, "sudo iwconfig eth1 rate 5.5M" worked for me. I had the same problem that I could scan the network but not connect. -- [bcm43xx] No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. https://bugs.launchpad.net/bugs/37765 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From greg at rhobard.com Wed Jan 23 22:17:18 2008 From: greg at rhobard.com (glepore70) Date: Wed, 23 Jan 2008 22:17:18 -0000 Subject: [Bug 27421] Re: Logitech RX300 mouse extra-buttons without kernel events References: <20060113145426.21012.68118.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080123221718.3279.70603.malone@gangotri.ubuntu.com> Confirming this bug on 2.6.22-14-generic as well. Same output from evtest as described above by Ignacio Lago Fontán. Suggested fix by Grzegorz Orciuch doesn't work, xev still fails to see left and right side wheel clicks. ** Also affects: linux-source-2.6.22 (Ubuntu) Importance: Undecided Status: New -- Logitech RX300 mouse extra-buttons without kernel events https://bugs.launchpad.net/bugs/27421 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From adconrad at 0c3.net Wed Jan 23 22:42:13 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:42:13 -0000 Subject: [Bug 3842] Re: lvm snapshot module in initrd References: <20051103090757.10771.68465.malonedeb@gangotri.ubuntu.com> Message-ID: <20080123224213.3029.99322.launchpad@gangotri.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- lvm snapshot module in initrd https://bugs.launchpad.net/bugs/3842 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:41:52 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:41:52 -0000 Subject: [Bug 6707] Re: Description of config option "NFSOPTS" missing in "initramfs.conf" and "initramfs.conf.5" References: <20060112131142.937.16361.malonedeb@gangotri.ubuntu.com> Message-ID: <20080123224153.13492.44756.launchpad@potassium.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- Description of config option "NFSOPTS" missing in "initramfs.conf" and "initramfs.conf.5" https://bugs.launchpad.net/bugs/6707 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:42:33 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:42:33 -0000 Subject: [Bug 24600] Re: Should honour hostname from DHCP References: <20060113142952.21012.14842.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080123224233.3029.66729.launchpad@gangotri.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- Should honour hostname from DHCP https://bugs.launchpad.net/bugs/24600 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:43:19 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:43:19 -0000 Subject: [Bug 27669] Re: wishlist: Could initramfs detect vga=XXX and autoload vesafb? References: <20060113151843.29386.7807.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080123224319.3029.27868.launchpad@gangotri.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- wishlist: Could initramfs detect vga=XXX and autoload vesafb? https://bugs.launchpad.net/bugs/27669 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:43:28 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:43:28 -0000 Subject: [Bug 28014] Re: add support for writeable read-only nfsroot through unionfs References: <20060113152021.29386.67069.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080123224328.3029.85600.launchpad@gangotri.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- add support for writeable read-only nfsroot through unionfs https://bugs.launchpad.net/bugs/28014 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:40:18 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:40:18 -0000 Subject: [Bug 31318] Re: MODULES=dep does not handle modprobe install directives References: <20060213150954.1233.98512.malonedeb@gandwana.ubuntu.com> Message-ID: <20080123224018.13492.9914.launchpad@potassium.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- MODULES=dep does not handle modprobe install directives https://bugs.launchpad.net/bugs/31318 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:43:36 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:43:36 -0000 Subject: [Bug 33819] Re: add a way to use radeonfb instead of vesafb or vga16fb References: <20060305173051.22115.682.malonedeb@gandwana.ubuntu.com> Message-ID: <20080123224336.3029.28648.launchpad@gangotri.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- add a way to use radeonfb instead of vesafb or vga16fb https://bugs.launchpad.net/bugs/33819 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:40:25 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:40:25 -0000 Subject: [Bug 35171] Re: G5 single (PowerMac 9.1) apt-get install ubuntu-desktop Dapper PPC Flight 5 problems. References: <20060316084613.6510.87568.malonedeb@gangotri.ubuntu.com> Message-ID: <20080123224025.3029.63110.launchpad@gangotri.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- G5 single (PowerMac 9.1) apt-get install ubuntu-desktop Dapper PPC Flight 5 problems. https://bugs.launchpad.net/bugs/35171 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:40:32 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:40:32 -0000 Subject: [Bug 37527] Re: Unable to install initramfs-tools in Dapper 64 References: <20060331203133.23707.90921.malonedeb@gandwana.ubuntu.com> Message-ID: <20080123224032.25204.33050.launchpad@gandwana.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- Unable to install initramfs-tools in Dapper 64 https://bugs.launchpad.net/bugs/37527 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:41:18 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:41:18 -0000 Subject: [Bug 41137] Re: No indication that a resume from hibernation has begun References: <20060424162057.13024.40038.malonedeb@gandwana.ubuntu.com> Message-ID: <20080123224118.13492.6324.launchpad@potassium.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- No indication that a resume from hibernation has begun https://bugs.launchpad.net/bugs/41137 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:41:32 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:41:32 -0000 Subject: [Bug 67932] Re: conf.d/resume creation in preinst doesn't work References: <20061024092435.29371.30822.malonedeb@gandwana.ubuntu.com> Message-ID: <20080123224132.13492.57411.launchpad@potassium.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- conf.d/resume creation in preinst doesn't work https://bugs.launchpad.net/bugs/67932 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:38:15 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:38:15 -0000 Subject: [Bug 5944] Re: init script disregards NFSROOT=auto option in some cases References: <20051219150936.24631.55381.malonedeb@gangotri.ubuntu.com> Message-ID: <20080123223816.25204.18520.launchpad@gandwana.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- init script disregards NFSROOT=auto option in some cases https://bugs.launchpad.net/bugs/5944 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:39:16 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:39:16 -0000 Subject: [Bug 19658] Re: modules=dep breaks boot References: <20060113140249.21012.63863.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080123223916.25204.24884.launchpad@gandwana.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- modules=dep breaks boot https://bugs.launchpad.net/bugs/19658 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:39:23 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:39:23 -0000 Subject: [Bug 20554] Re: When booting with a initramfs image I can't use lilo to update mbr References: <20060113140756.21012.9059.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080123223923.25204.87952.launchpad@gandwana.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- When booting with a initramfs image I can't use lilo to update mbr https://bugs.launchpad.net/bugs/20554 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:37:33 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:37:33 -0000 Subject: [Bug 21759] Re: Boot failure: FATAL: Module unknown not found References: <20060113141436.21012.13325.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080123223733.3029.56634.launchpad@gangotri.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- Boot failure: FATAL: Module unknown not found https://bugs.launchpad.net/bugs/21759 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:39:29 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:39:29 -0000 Subject: [Bug 22673] Re: Boot hang, apparently blocking on SW RAID rebuild References: <20060113141936.21012.23514.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080123223930.25204.4234.launchpad@gandwana.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- Boot hang, apparently blocking on SW RAID rebuild https://bugs.launchpad.net/bugs/22673 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:39:36 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:39:36 -0000 Subject: [Bug 24855] Re: [patch] hook_functions: copy_exec should make directories in DESTDIR References: <20060113143112.21012.44468.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080123223936.13492.56839.launchpad@potassium.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- [patch] hook_functions: copy_exec should make directories in DESTDIR https://bugs.launchpad.net/bugs/24855 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:39:43 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:39:43 -0000 Subject: [Bug 26314] Re: should map old LVM syntax (/dev/vgname/lvname) syntax to devmapper References: <20060113144855.21012.6547.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080123223944.3029.47681.launchpad@gangotri.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- should map old LVM syntax (/dev/vgname/lvname) syntax to devmapper https://bugs.launchpad.net/bugs/26314 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:40:01 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:40:01 -0000 Subject: [Bug 27172] Re: [patch] install to pcmcia-connected disk can't find root References: <20060113145316.21012.4911.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080123224001.25204.34283.launchpad@gandwana.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- [patch] install to pcmcia-connected disk can't find root https://bugs.launchpad.net/bugs/27172 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:39:52 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:39:52 -0000 Subject: [Bug 26391] Re: mount: Mounting /root/dev on /dev/.static/dev failed: No such file or directory References: <20060113144918.21012.73230.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080123223952.13492.40197.launchpad@potassium.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- mount: Mounting /root/dev on /dev/.static/dev failed: No such file or directory https://bugs.launchpad.net/bugs/26391 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:37:41 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:37:41 -0000 Subject: [Bug 29858] Re: root on lvm fails to boot. References: <20060127135241.26234.74384.malonedeb@gangotri.ubuntu.com> Message-ID: <20080123223741.25204.37918.launchpad@gandwana.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- root on lvm fails to boot. https://bugs.launchpad.net/bugs/29858 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:40:09 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:40:09 -0000 Subject: [Bug 31313] Re: Library path not copied from system References: <20060213140713.1195.24412.malonedeb@gandwana.ubuntu.com> Message-ID: <20080123224010.3029.20971.launchpad@gangotri.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- Library path not copied from system https://bugs.launchpad.net/bugs/31313 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:37:48 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:37:48 -0000 Subject: [Bug 31790] Re: initramfs-tools needs to update lilo after changing the initrd References: <20060217170319.1427.38197.malonedeb@gangotri.ubuntu.com> Message-ID: <20080123223748.25204.18299.launchpad@gandwana.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- initramfs-tools needs to update lilo after changing the initrd https://bugs.launchpad.net/bugs/31790 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:37:58 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:37:58 -0000 Subject: [Bug 32123] Re: initramfs not generated correctly on dist-upgrade References: <20060220130413.1427.33476.malonedeb@gangotri.ubuntu.com> Message-ID: <20080123223758.13492.83950.launchpad@potassium.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- initramfs not generated correctly on dist-upgrade https://bugs.launchpad.net/bugs/32123 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From adconrad at 0c3.net Wed Jan 23 22:38:09 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:38:09 -0000 Subject: [Bug 32446] Re: Dapper does not boot after last update References: <20060222105340.31348.66053.malonedeb@gangotri.ubuntu.com> Message-ID: <20080123223809.13492.9536.launchpad@potassium.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: Adam Conrad (adconrad) => (unassigned) -- Dapper does not boot after last update https://bugs.launchpad.net/bugs/32446 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From adconrad at 0c3.net Wed Jan 23 22:45:31 2008 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 23 Jan 2008 22:45:31 -0000 Subject: [Bug 22023] Re: Please use /etc/initramfs-tools instead of /etc/mkinitramfs for config stuff References: <20060113141559.21012.71527.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080123224531.25204.83036.launchpad@gandwana.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Status: Fix Committed => Fix Released -- Please use /etc/initramfs-tools instead of /etc/mkinitramfs for config stuff https://bugs.launchpad.net/bugs/22023 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From tsmith84 at gmail.com Thu Jan 24 04:21:35 2008 From: tsmith84 at gmail.com (Timothy Smith) Date: Thu, 24 Jan 2008 04:21:35 -0000 Subject: [Bug 184852] Re: "dpkg-reconfigure --all" invokes update-initramfs(8) multiple times References: <20080121170530.3443.14259.malonedeb@gangotri.ubuntu.com> Message-ID: <20080124042135.9036.70711.malone@gangotri.ubuntu.com> This bug is still present in the most recent nightly builds of Ubuntu -- "dpkg-reconfigure --all" invokes update-initramfs(8) multiple times https://bugs.launchpad.net/bugs/184852 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From ben.collins at ubuntu.com Thu Jan 24 09:03:02 2008 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 24 Jan 2008 09:03:02 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080124090302.15456.21406.malone@gangotri.ubuntu.com> Stefan, this seems to revolve around the "pnpacp: exceeded..." message. Please set the severity of this printk to something more reasonable, like KERN_WARNING. Thanks ** Changed in: linux-meta (Ubuntu Hardy) Importance: Low => Unknown Assignee: Ubuntu Kernel Team (ubuntu-kernel-team) => (unassigned) Status: Triaged => Invalid ** Changed in: linux (Ubuntu Hardy) Assignee: Ubuntu Kernel Team (ubuntu-kernel-team) => Stefan Bader (stefan-bader-canonical) -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From stefan.bader at canonical.com Thu Jan 24 14:03:27 2008 From: stefan.bader at canonical.com (Stefan Bader) Date: Thu, 24 Jan 2008 14:03:27 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080124140327.11447.1157.malone@gandwana.ubuntu.com> The message level has ben lowered to warning. ** Changed in: linux (Ubuntu Hardy) Status: Triaged => Fix Committed -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From nacho.exr at gmail.com Thu Jan 24 17:07:43 2008 From: nacho.exr at gmail.com (=?utf-8?q?Ignacio_Lago_Font=C3=A1n?=) Date: Thu, 24 Jan 2008 17:07:43 -0000 Subject: [Bug 27421] Re: Logitech RX300 mouse extra-buttons without kernel events References: <20060113145426.21012.68118.launchpad@macquarie.warthogs.hbd.com> <20080123221718.3279.70603.malone@gangotri.ubuntu.com> Message-ID: With a Section in Xorg.conf as this: Section "InputDevice" Identifier "Mouse0" Driver "evdev" Option "Protocol" "IMPS/2" Option "CorePointer" Option "Emulate3Buttons" "false" Option "Buttons" "7" #Option "Device" "/dev/input/event2" Option "Name" "Logitech USB-PS/2 Optical Mouse" Option "ZAxisMapping" "4 5" Option "ButtonMapping" "1 2 3 7 6" Option "Resolution" "300" EndSection I have my RX300 mouse working 100%, with the side buttons of the wheel (xev detects them and I can go Back and Forward in Firefox with them). Thanks Grzegorz Orciuch :) your tip worked for me. Gutsy Gibbon with kernel 2.6.22-14-generic -- Logitech RX300 mouse extra-buttons without kernel events https://bugs.launchpad.net/bugs/27421 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From daniel.holbach at ubuntu.com Thu Jan 24 17:42:56 2008 From: daniel.holbach at ubuntu.com (Daniel Holbach) Date: Thu, 24 Jan 2008 17:42:56 -0000 Subject: [Bug 33819] Re: add a way to use radeonfb instead of vesafb or vga16fb References: <20060305173051.22115.682.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124174257.11236.45190.malone@gandwana.ubuntu.com> To get your fix (or workaround) included in Ubuntu, try transforming it into a patch (http://wiki.ubuntu.com/PackagingGuide/Recipes/Debdiff) and submitting it for review (http://wiki.ubuntu.com/SponsorshipProcess). -- add a way to use radeonfb instead of vesafb or vga16fb https://bugs.launchpad.net/bugs/33819 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From 159241 at bugs.launchpad.net Thu Jan 24 18:12:34 2008 From: 159241 at bugs.launchpad.net (Launchpad Bug Tracker) Date: Thu, 24 Jan 2008 18:12:34 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080124181349.20086.70845.malone@drescher.canonical.com> This bug was fixed in the package linux - 2.6.24-5.8 --------------- linux (2.6.24-5.8) hardy; urgency=low [Alessio Igor Bogani] * rt: Update to 2.6.24-rc8-rt1 * rt: Update configuration files [Amit Kucheria] * Asix: fix breakage caused in 2.6.24-rc7 * Add CONFIG_CPUSETS to server-related flavours - LP: #182434 [Chuck Short] * SAUCE: ata: blacklist FUJITSU MHW2160BH PL - LP: #175834 [Kees Cook] * AppArmor: updated patch series to upstream SVN 1079. [Soren Hansen] * Updated configs to enable virtio stuff Ignore: yes [Stefan Bader] * Enabled CONFIG_BSD_PROCESS_ACCT=y for sparc. - LP: #176587 * Enable CONFIG_AUDITSYSCALL=y. - LP: #140784 * Added CONFIG_AUDIT_SYSCALL=y to custom lpia(compat) * Enabled CONFIG_HUGETLBFS=y for i386/server amd64/server and ia64. * Lower priority of pnpacpi resource messages to warning level. - LP: #159241 * Fix the messed up message level of pnpacpi parser. [Tim Gardner] * Start new release, bump ABI to -5 * Disabled iwlwifi preperatory to moving it to l-u-m. * Enabled CONFIG_USB_SERIAL_KEYSPAN * Disabled CONFIG_CGROUPS. * Virtio config settings for -rt. * Re-enable IWLWIFI in the kernel. * Fixed -rt saa7134-core.c FTBS [Upstream Kernel Changes] * Input: Handle EV_PWR type of input caps in input_set_capability. * Input: jornada680_kbd - fix default keymap * increase PNP_MAX_PORT to 40 from 24 * sched: fix gcc warnings * leds: Fix leds_list_lock locking issues * leds: Fix locomo LED driver oops * x86: fix asm-x86/byteorder.h for userspace export * x86: fix asm-x86/msr.h for user-space export * ACPI: EC: Enable boot EC before bus_scan * ACPI: Make sysfs interface in ACPI power optional. * fix lguest rmmod "bad pgd" * slub: provide /proc/slabinfo * [POWERPC] Fix build failure on Cell when CONFIG_SPU_FS=y * slub: register slabinfo to procfs * [SCSI] scsi_sysfs: restore prep_fn when ULD is removed * Unify /proc/slabinfo configuration * scsi: revert "[SCSI] Get rid of scsi_cmnd->done" * restrict reading from /proc//maps to those who share ->mm or can ptrace pid * Fix kernel/ptrace.c compile problem (missing "may_attach()") * hwmon: (w83627ehf) Be more careful when changing VID input level * NFS: Fix a possible Oops in fs/nfs/super.c * NFSv4: Fix circular locking dependency in nfs4_kill_renewd * NFS: add newline to kernel warning message in auth_gss code * NFSv4: nfs4_open_confirm must not set the open_owner as confirmed on error * NFSv4: Fix open_to_lock_owner sequenceid allocation... * gameport: don't export functions that are static inline * Input: spitzkbd - fix suspend key handling * Input: pass EV_PWR events to event handlers * [ARM] 4735/1: Unbreak pxa25x suspend/resume * IB/srp: Fix list corruption/oops on module reload * Console is utf-8 by default * [IA64] Update Altix BTE error return status patch * [IA64] Update Altix nofault code * [X25]: Add missing x25_neigh_put * [XFRM]: Do not define km_migrate() if !CONFIG_XFRM_MIGRATE * [CASSINI]: Fix endianness bug. * [CASSINI]: Revert 'dont touch page_count'. * [CASSINI]: Program parent Intel31154 bridge when necessary. * [CASSINI]: Set skb->truesize properly on receive packets. * [CASSINI]: Fix two obvious NAPI bugs. * [CASSINI]: Bump driver version and release date. * [INET]: Fix netdev renaming and inet address labels * [CONNECTOR]: Return proper error code in cn_call_callback() * [ISDN] i4l: 'NO CARRIER' message lost after ldisc flush * [ISDN]: i4l: Fix DLE handling for i4l-audio * fix: using joysticks in 32 bit applications on 64 bit systems * [ARM] 4691/1: add missing i2c_board_info struct for at91rm9200 * hda_intel suspend latency: shorten codec read * CPU hotplug: fix cpu_is_offline() on !CONFIG_HOTPLUG_CPU * Linux 2.6.24-rc7 * sh: Fix argument page dcache flushing regression. * V4L/DVB (6944a): Fix Regression VIDIOCGMBUF ioctl hangs on bttv driver * V4L/DVB (6916): ivtv: udelay has to be changed *after* the eeprom was read, not before * [MIPS] Move inclusing of kernel/time/Kconfig menu to appropriate place * [MIPS] Alchemy: Fix use of __init code bug exposed by modpost warning * [MIPS] Fix IP32 breakage * [MIPS] Assume R4000/R4400 newer than 3.0 don't have the mfc0 count bug * [MIPS] Fix CONFIG_BOOT_RAW. * ACPI: Reintroduce run time configurable max_cstate for !CPU_IDLE case * core dump: real_parent ppid * acct: real_parent ppid * IB/mlx4: Fix value of pkey_index in QP1 completions * IB/srp: Release transport before removing host * x86: fix do_fork_idle section mismatch * spi_bitbang: always grab lock with irqs blocked * fat: optimize fat_count_free_clusters() * KEYS: fix macro * md: fix data corruption when a degraded raid5 array is reshaped * xip: fix get_zeroed_page with __GFP_HIGHMEM * eCryptfs: fix dentry handling on create error, unlink, and inode destroy * vmcoreinfo: add the array length of "free_list" for filtering free pages * dmi-id: fix for __you_cannot_kmalloc_that_much failure * snd_mixer_oss_build_input(): fix for __you_cannot_kmalloc_that_much failure with gcc-3.2 * Fix crash with FLAT_MEMORY and ARCH_PFN_OFFSET != 0 * hfs: handle more on-disk corruptions without oopsing * pl2303: Fix mode switching regression * futex: Prevent stale futex owner when interrupted/timeout * [NIU]: Fix slowpath interrupt handling. * [NIU]: Missing ->last_rx update. * [NIU]: Fix potentially stuck TCP socket send queues. * [NIU]: Update driver version and release date. * [IPV4] raw: Strengthen check on validity of iph->ihl * [IPV4] ipconfig: Fix regression in ip command line processing * [NET]: Fix netx-eth.c compilation. * [METH]: Fix MAC address handling. * [TULIP]: NAPI full quantum bug. * [ATM]: [nicstar] delay irq setup until card is configured * [SCTP]: Fix the name of the authentication event. * [SCTP]: Correctly handle AUTH parameters in unexpected INIT * [SCTP]: Add back the code that accounted for FORWARD_TSN parameter in INIT. * [IRDA]: irda_create() nuke user triggable printk * b43: Fix rxheader channel parsing * [NET]: Do not grab device reference when scheduling a NAPI poll. * [NET]: Add NAPI_STATE_DISABLE. * [NET]: Do not check netif_running() and carrier state in ->poll() * ssb: Fix probing of PCI cores if PCI and PCIE core is available * mac80211: return an error when SIWRATE doesn't match any rate * [NETXEN]: Fix ->poll() done logic. * [NET]: Fix drivers to handle napi_disable() disabling interrupts. * [NET]: Stop polling when napi_disable() is pending. * [NET]: Make ->poll() breakout consistent in Intel ethernet drivers. * [NET] Intel ethernet drivers: update MAINTAINERS * [NET]: kaweth was forgotten in msec switchover of usb_start_wait_urb * [IPV4] ROUTE: ip_rt_dump() is unecessary slow * [NET]: Clone the sk_buff 'iif' field in __skb_clone() * [LRO] Fix lro_mgr->features checks * [NET]: mcs7830 passes msecs instead of jiffies to usb_control_msg * [FORCEDETH]: Fix reversing the MAC address on suspend. * [XFRM]: xfrm_algo_clone() allocates too much memory * [SOCK]: Adds a rcu_dereference() in sk_filter * [CONNECTOR]: Don't touch queue dev after decrement of ref count. * [IPV6]: IPV6_MULTICAST_IF setting is ignored on link-local connect() * [ATM]: Check IP header validity in mpc_send_packet * show_task: real_parent * [SCSI] qla1280: fix 32 bit segment code * [NIU]: Support for Marvell PHY * [NEIGH]: Fix race between neigh_parms_release and neightbl_fill_parms * [IPV4] ROUTE: fix rcu_dereference() uses in /proc/net/rt_cache * [AX25]: Kill user triggable printks. * [ARM] pxa: silence warnings from cpu_is_xxx() macros * [POWERPC] efika: add phy-handle property for fec_mpc52xx * [ARM] vfp: fix fuitod/fsitod instructions * [CRYPTO] padlock: Fix alignment fault in aes_crypt_copy * rt2x00: Allow rt61 to catch up after a missing tx report * rt2x00: Corectly initialize rt2500usb MAC * rt2x00: Put 802.11 data on 4 byte boundary * NFSv4: Give the lock stateid its own sequence queue * sata_qstor: use hardreset instead of softreset * libata-sff: PCI IRQ handling fix * pata_pdc202xx_old: Further fixups * pata_ixp4xx_cf: fix compilation introduced by ata_port_desc() conversion * libata-pmp: 4726 hates SRST * libata-pmp: propagate timeout to host link * libata: don't normalize UNKNOWN to NONE after reset * Update kernel parameter document for libata DMA mode setting knobs. * sata_sil24: prevent hba lockup when pass-through ATA commands are used * ide: workaround suspend bug for ACPI IDE * ide: fix cable detection for SATA bridges * trm290: do hook dma_host_{on,off} methods (take 2) * libata and starting/stopping ATAPI floppy devices * ACPI : Not register gsi for PCI IDE controller in legacy mode * ACPICA: fix acpi_serialize hang regression * sh: Force __access_ok() to obey address space limit. * [AX25] af_ax25: Possible circular locking. * ACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9 * [POWERPC] Fix CPU hotplug when using the SLB shadow buffer * [BLUETOOTH]: rfcomm tty BUG_ON() code fix * [BLUETOOTH]: Always send explicit hci_ll wake-up acks. * [DECNET] ROUTE: fix rcu_dereference() uses in /proc/net/decnet_cache * [VLAN]: nested VLAN: fix lockdep's recursive locking warning * [MACVLAN]: Prevent nesting macvlan devices * [NETFILTER]: ip6t_eui64: Fixes calculation of Universal/Local bit * [NETFILTER]: xt_helper: Do not bypass RCU * [XFS] fix unaligned access in readdir * Don't blatt first element of prv in sg_chain() * loop: fix bad bio_alloc() nr_iovec request * block: fix blktrace timestamps * blktrace: kill the unneeded initcall * V4L/DVB (6999): ivtv: stick to udelay=10 after all * V4L/DVB (7001): av7110: fix section mismatch * [MIPS] Wrong CONFIG option prevents setup of DMA zone. * [MIPS] pnx8xxx: move to clocksource * [MIPS] Malta: Fix software reset on big endian * [MIPS] Lasat: Fix built in separate object directory. * [MIPS] Replace 40c7869b693b18412491fdcff64682215b739f9e kludge * Pull bugzilla-5637 into release branch * Pull bugzilla-8171 into release branch * Pull bugzilla-8973 into release branch * PM: ACPI and APM must not be enabled at the same time * Pull bugzilla-9194 into release branch * Pull bugzilla-9494 into release branch * Pull bugzilla-9535 into release branch * Pull bugzilla-9627 into release branch * Pull bugzilla-9683 into release branch * IDE: terminate ACPI DMI list * cache invalidation error for buffered write * ps3fb: prevent use after free of fb_info * ps3fb: fix deadlock on kexec() * [NETFILTER]: bridge: fix double POST_ROUTING invocation * xircom_cb endianness fixes * de4x5 fixes * endianness noise in tulip_core * netxen: update MAINTAINERS * netxen: update driver version * netxen: stop second phy correctly * netxen: optimize tx handling * netxen: fix byte-swapping in tx and rx * 3c509: PnP resource management fix * Fixed a small typo in the loopback driver * ip1000: menu location change * r8169: fix missing loop variable increment * [usb netdev] asix: fix regression * fs_enet: check for phydev existence in the ethtool handlers * Use access mode instead of open flags to determine needed permissions * sky2: large memory workaround. * sky2: remove check for PCI wakeup setting from BIOS * spidernet MAINTAINERship update * pnpacpi: print resource shortage message only once * Pull bugzilla-9535 into release branch * [SPARC]: Make gettimeofday() monotonic again. * [SPARC64]: Fix build with SPARSEMEM_VMEMMAP disabled. * remove task_ppid_nr_ns * knfsd: Allow NFSv2/3 WRITE calls to succeed when krb5i etc is used. * Input: improve Kconfig help entries for HP Jornada devices * [TOKENRING]: rif_timer not initialized properly * modules: de-mutex more symbol lookup paths in the module code * w1: decrement slave counter only in ->release() callback * Kick CPUS that might be sleeping in cpus_idle_wait * TPM: fix suspend and resume failure * MAINTAINERS: email update and add missing entry * quicklists: Only consider memory that can be used with GFP_KERNEL * macintosh: fix fabrication of caplock key events * scsi/qla2xxx/qla_os.c section fix * cciss: section mismatch * advansys: fix section mismatch warning * hugetlbfs: fix quota leak * s3c2410fb: fix incorrect argument type in resume function * CRIS: define __ARCH_WANT_SYS_RT_SIGSUSPEND in unistd.h for CRIS * CRIS v10: correct do_signal to fix oops and clean up signal handling in general * CRIS v10: kernel/time.c needs to include linux/vmstat.h to compile * uvesafb: fix section mismatch warnings * CRIS v10: driver for ds1302 needs to include cris-specific i2c.h * OSS msnd: fix array overflows * i2c-omap: Fix NULL pointer dereferencing * i2c: Spelling fixes * i2c: Driver IDs are optional * i2c-sibyte: Fix an error path * fix the "remove task_ppid_nr_ns" commit * [MIPS] Kconfig fixes for BCM47XX platform * [MIPS] Cobalt: Fix ethernet interrupts for RaQ1 * [MIPS] Cobalt: Qube1 has no serial port so don't use it * [MIPS] Cacheops.h: Fix typo. * ata_piix: ignore ATA_DMA_ERR on vmware ich4 * sata_sil24: fix stupid typo * sata_sil24: freeze on non-dev errors reported via CERR * libata: relocate sdev->manage_start_stop configuration * [POWERPC] Fix boot failure on POWER6 * x86: fix boot crash on HIGHMEM4G && SPARSEMEM * x86: asm-x86/msr.h: pull in linux/types.h * x86: fix RTC_AIE with CONFIG_HPET_EMULATE_RTC * Fix ARM profiling/instrumentation configuration * Fix Blackfin HARDWARE_PM support * libata fixes for sparse-found problems * [libata] pata_bf54x: checkpatch fixes * [libata] core checkpatch fix * libata: correct handling of TSS DVD * [IA64] Fix unaligned handler for floating point instructions with base update * Linux 2.6.24-rc8 * lockdep: fix internal double unlock during self-test * lockdep: fix workqueue creation API lockdep interaction * lockdep: more hardirq annotations for notify_die() * hostap: section mismatch warning * wireless/libertas support for 88w8385 sdio older revision * ipw2200: fix typo in kerneldoc * b43: fix use-after-free rfkill bug * rt2x00: Fix ieee80211 payload alignment * sysfs: make sysfs_lookup() return ERR_PTR(-ENOENT) on failed lookup * sysfs: fix bugs in sysfs_rename/move_dir() * Use access mode instead of open flags to determine needed permissions (CVE-2008-0001) * IB/ipath: Fix receiving UD messages with immediate data * [NET]: Fix TX timeout regression in Intel drivers. * [NIU]: Fix 1G PHY link state handling. * [SPARC64]: Fix hypervisor TLB operation error reporting. * Input: mousedev - handle mice that use absolute coordinates * Input: usbtouchscreen - fix buffer overflow, make more egalax work * Input: psmouse - fix potential memory leak in psmouse_connect() * Input: psmouse - fix input_dev leak in lifebook driver * Input: ALPS - fix sync loss on Acer Aspire 5720ZG * ipg: balance locking in irq handler * ipg: plug Tx completion leak * ipg: fix queue stop condition in the xmit handler * ipg: fix Tx completion irq request * cpufreq: Initialise default governor before use * hfs: fix coverity-found null deref * pnpacpi: print resource shortage message only once (more) * CRIS v10: vmlinux.lds.S: ix kernel oops on boot and use common defines * mm: fix section mismatch warning in page_alloc.c * jbd: do not try lock_acquire after handle made invalid * alpha: fix conversion from denormal float to double * #ifdef very expensive debug check in page fault path * Fix unbalanced helper_lock in kernel/kmod.c * fix wrong sized spinlock flags argument * bonding: fix locking in sysfs primary/active selection * bonding: fix ASSERT_RTNL that produces spurious warnings * bonding: fix locking during alb failover and slave removal * bonding: release slaves when master removed via sysfs * bonding: Fix up parameter parsing * bonding: fix lock ordering for rtnl and bonding_rwsem * bonding: Don't hold lock when calling rtnl_unlock * Documentation: add a guideline for hard_start_xmit method * atl1: fix frame length bug * S2io: Fixed synchronization between scheduling of napi with card reset and close * dscc4 endian fixes * wan/lmc bitfields fixes * sbni endian fixes * 3c574, 3c515 bitfields abuse * dl2k: BMCR_t fixes * dl2k: ANAR, ANLPAR fixes * dl2k: BMSR fixes * dl2k: MSCR, MSSR, ESR, PHY_SCR fixes * dl2k: the rest * Replace cpmac fix * [WATCHDOG] Revert "Stop looking for device as soon as one is found" * [WATCHDOG] clarify watchdog operation in documentation * x86: add support for the latest Intel processors to Oprofile * Selecting LGUEST should turn on Guest support, as in 2.6.23. * ARM: OMAP1: Keymap fix for f-sample and p2-sample * ARM: OMAP1: Fix compile for board-nokia770 * pata_pdc202xx_old: Fix crashes with ATAPI * arch: Ignore arch/i386 and arch/x86_64 * Remove bogus duplicate CONFIG_LGUEST_GUEST entry. * [ARM] pxa: don't rely on r2 being preserved over a function call * [ARM] 4748/1: dca: source drivers/dca/Kconfig in arch/arm/Kconfig to fix warning * rfkill: call rfkill_led_trigger_unregister() on error * [IPV6]: Mischecked tw match in __inet6_check_established. * [IPV4] fib_hash: fix duplicated route issue * [IPV4] fib_trie: fix duplicated route issue * [NET]: Fix interrupt semaphore corruption in Intel drivers. * [IPV4] FIB_HASH : Avoid unecessary loop in fn_hash_dump_zone() * [IPV6] ROUTE: Make sending algorithm more friendly with RFC 4861. * [NETFILTER]: bridge-netfilter: fix net_device refcnt leaks * [NEIGH]: Revert 'Fix race between neigh_parms_release and neightbl_fill_parms' * [IrDA]: af_irda memory leak fixes * [ATM] atm/idt77105.c: Fix section mismatch. * [ATM] atm/suni.c: Fix section mismatch. * [AF_KEY]: Fix skb leak on pfkey_send_migrate() error * [NET]: rtnl_link: fix use-after-free * [IPV6]: ICMP6_MIB_OUTMSGS increment duplicated * [IPV6]: RFC 2011 compatibility broken * [ICMP]: ICMP_MIB_OUTMSGS increment duplicated * selinux: fix memory leak in netlabel code * [MIPS] SMTC: Fix build error. * [MIPS] Malta: Fix reading the PCI clock frequency on big-endian * tc35815: Use irq number for tc35815-mac platform device id * keyspan: fix oops * hrtimer: fix section mismatch * timer: fix section mismatch * CRIS: add missed local_irq_restore call * s3c2410_fb: fix line length calculation * Fix filesystem capability support * sched: group scheduler, set uid share fix * hwmon: (it87) request only Environment Controller ports * W1: w1_therm.c ds18b20 decode freezing temperatures correctly * W1: w1_therm.c is flagging 0C etc as invalid * rcu: fix section mismatch * Fix file references in documentation and Kconfig * x86: GEODE fix a race condition in the MFGPT timer tick * virtnet: remove double ether_setup * virtio:simplify-config-mechanism * virtio: An entropy device, as suggested by hpa. * virtio: Export vring functions for modules to use * virtio: Put the virtio under the virtualization menu * virtio:pci-device * Fix vring_init/vring_size to take unsigned long * virtio:vring-kick-when-empty * virtio:explicit-callback-disable * virtio:net-flush-queue-on-init * virtio:net-fix-xmit-skb-free-real * Parametrize the napi_weight for virtio receive queue. * Handle module unload Add the device release function. * Update all status fields on driver unload * Make virtio modules GPL * Make virtio_pci license be GPL2+ * Use Qumranet donated PCI vendor/device IDs * virtio:more-interrupt-suppression * Reboot Implemented * lguest:reboot-fix * introduce vcpu struct * adapt lguest launcher to per-cpuness * initialize vcpu * per-cpu run guest * make write() operation smp aware * make hypercalls use the vcpu struct * per-vcpu lguest timers * per-vcpu interrupt processing. * map_switcher_in_guest() per-vcpu * make emulate_insn receive a vcpu struct. * make registers per-vcpu * replace lguest_arch with lg_cpu_arch. * per-vcpu lguest task management * makes special fields be per-vcpu * make pending notifications per-vcpu * per-vcpu lguest pgdir management -- Tim Gardner Thu, 17 Jan 2008 14:45:01 -0700 ** Changed in: linux (Ubuntu Hardy) Status: Fix Committed => Fix Released ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2008-0001 -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From oponek at gmail.com Thu Jan 24 20:09:09 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:09:09 -0000 Subject: [Bug 110590] Re: rt2x00 kernel support References: <20070427161116.15742.95138.malonedeb@potassium.ubuntu.com> Message-ID: <20080124200909.15288.75353.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- rt2x00 kernel support https://bugs.launchpad.net/bugs/110590 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:08:15 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:08:15 -0000 Subject: [Bug 95889] Re: rt73 wifi not working out of box References: <20070325130407.24013.74045.malonedeb@gangotri.ubuntu.com> Message-ID: <20080124200815.15288.35429.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- rt73 wifi not working out of box https://bugs.launchpad.net/bugs/95889 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:10:12 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:10:12 -0000 Subject: [Bug 41286] Re: x64 Ubuntu Dapper 6.06 Flight6 Network Manager - no WPA with RT2500 chipsets References: <20060425122131.28941.74037.malonedeb@gangotri.ubuntu.com> Message-ID: <20080124201012.14415.6545.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 37120 rt2500 driver does not implement wireless extensions correctly ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- x64 Ubuntu Dapper 6.06 Flight6 Network Manager - no WPA with RT2500 chipsets https://bugs.launchpad.net/bugs/41286 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:14:25 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:14:25 -0000 Subject: [Bug 110288] Re: rt2500 not supported References: <20070426151220.2885.95919.malonedeb@gangotri.ubuntu.com> Message-ID: <20080124201426.11341.26954.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 37120 rt2500 driver does not implement wireless extensions correctly ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- rt2500 not supported https://bugs.launchpad.net/bugs/110288 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:14:16 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:14:16 -0000 Subject: [Bug 107555] Re: rt2500 cannot connect to WPA encrypted network with fiesty References: <20070418191606.18761.24497.malonedeb@gangotri.ubuntu.com> Message-ID: <20080124201416.11341.79997.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 37120 rt2500 driver does not implement wireless extensions correctly ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- rt2500 cannot connect to WPA encrypted network with fiesty https://bugs.launchpad.net/bugs/107555 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:14:07 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:14:07 -0000 Subject: [Bug 106874] Re: No option for WPA in Network Manager even though RALink driver supports it. References: <20070415231859.22305.66621.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124201407.11341.48721.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 37120 rt2500 driver does not implement wireless extensions correctly ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- No option for WPA in Network Manager even though RALink driver supports it. https://bugs.launchpad.net/bugs/106874 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:13:46 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:13:46 -0000 Subject: [Bug 105133] Re: wpa supplicant doesn't work on feisty with Ralink Devices References: <20070410112010.17339.53883.malonedeb@gangotri.ubuntu.com> Message-ID: <20080124201346.15176.94977.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 37120 rt2500 driver does not implement wireless extensions correctly ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- wpa supplicant doesn't work on feisty with Ralink Devices https://bugs.launchpad.net/bugs/105133 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:13:40 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:13:40 -0000 Subject: [Bug 96282] Re: wireless pcmcia card doesn't connect to AP on live cd session of after 7.04 install (keeping previous 6.10 /home partition) References: <20070326082221.27963.71529.malonedeb@gangotri.ubuntu.com> Message-ID: <20080124201341.14415.68076.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 37120 rt2500 driver does not implement wireless extensions correctly ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- wireless pcmcia card doesn't connect to AP on live cd session of after 7.04 install (keeping previous 6.10 /home partition) https://bugs.launchpad.net/bugs/96282 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:13:21 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:13:21 -0000 Subject: [Bug 96281] Re: wireless pcmcia card doesn't connect to AP on live cd session of after 7.04 install (keeping previous 6.10 /home partition) References: <20070326082115.16882.59242.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124201322.15176.5266.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 37120 rt2500 driver does not implement wireless extensions correctly ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- wireless pcmcia card doesn't connect to AP on live cd session of after 7.04 install (keeping previous 6.10 /home partition) https://bugs.launchpad.net/bugs/96281 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:12:36 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:12:36 -0000 Subject: [Bug 95828] Re: Sitecom WL-115 ( Ralink RT2500 ) does not work with network-manager References: <20070325091405.24013.51891.malonedeb@gangotri.ubuntu.com> Message-ID: <20080124201238.15176.46690.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 37120 rt2500 driver does not implement wireless extensions correctly ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- Sitecom WL-115 ( Ralink RT2500 ) does not work with network-manager https://bugs.launchpad.net/bugs/95828 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:12:24 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:12:24 -0000 Subject: [Bug 95528] Re: The drivers for rt25xx does not implement wpa support References: <20070324160837.4465.63996.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124201224.11341.75294.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 37120 rt2500 driver does not implement wireless extensions correctly ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- The drivers for rt25xx does not implement wpa support https://bugs.launchpad.net/bugs/95528 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:11:58 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:11:58 -0000 Subject: [Bug 91685] Re: edgy eft, ralink rt2500 wireless not connecting References: <20070312155010.7697.76707.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124201158.15176.1224.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 37120 rt2500 driver does not implement wireless extensions correctly ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- edgy eft, ralink rt2500 wireless not connecting https://bugs.launchpad.net/bugs/91685 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:11:40 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:11:40 -0000 Subject: [Bug 51081] Re: rt2500 card not getting dhcp lease References: <20060627055255.29464.45760.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124201140.14521.43866.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 37120 rt2500 driver does not implement wireless extensions correctly ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- rt2500 card not getting dhcp lease https://bugs.launchpad.net/bugs/51081 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:11:28 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:11:28 -0000 Subject: [Bug 47778] Re: Connecting References: <20060531210800.4978.5239.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124201128.14521.14696.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 37120 rt2500 driver does not implement wireless extensions correctly ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- Connecting https://bugs.launchpad.net/bugs/47778 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:11:01 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:11:01 -0000 Subject: [Bug 45245] Re: Dapper: nm-applet doesn't detect network interfaces References: <20060517140935.15142.25941.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124201102.11447.3169.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 37120 rt2500 driver does not implement wireless extensions correctly ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- Dapper: nm-applet doesn't detect network interfaces https://bugs.launchpad.net/bugs/45245 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:10:42 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:10:42 -0000 Subject: [Bug 43425] Re: wl-107g no connection using wep References: <20060507181421.21547.18574.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124201042.14415.50513.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 37120 rt2500 driver does not implement wireless extensions correctly ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- wl-107g no connection using wep https://bugs.launchpad.net/bugs/43425 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:10:25 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:10:25 -0000 Subject: [Bug 42282] Re: fails to set the WEP encryption key (rt2500) References: <20060430211658.16712.53659.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124201026.14521.89172.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 37120 rt2500 driver does not implement wireless extensions correctly ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- fails to set the WEP encryption key (rt2500) https://bugs.launchpad.net/bugs/42282 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:14:46 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:14:46 -0000 Subject: [Bug 37120] Re: rt2500 driver does not implement wireless extensions correctly References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20080124201446.14415.69397.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- rt2500 driver does not implement wireless extensions correctly https://bugs.launchpad.net/bugs/37120 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From oponek at gmail.com Thu Jan 24 20:16:45 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:16:45 -0000 Subject: [Bug 164300] Re: Edimax wireless network works from live cd but fails after install References: <20071121105629.14865.89840.malonedeb@potassium.ubuntu.com> Message-ID: <20080124201645.14415.72878.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 144161 Wi-Fi rt73 USB (TP-Link TL-WN321G) doesn't connect ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- Edimax wireless network works from live cd but fails after install https://bugs.launchpad.net/bugs/164300 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:17:20 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:17:20 -0000 Subject: [Bug 144161] Re: Wi-Fi rt73 USB (TP-Link TL-WN321G) doesn't connect References: <20070923021649.6684.9936.malonedeb@potassium.ubuntu.com> Message-ID: <20080124201722.11447.94671.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- Wi-Fi rt73 USB (TP-Link TL-WN321G) doesn't connect https://bugs.launchpad.net/bugs/144161 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:17:57 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:17:57 -0000 Subject: [Bug 115994] Re: include serialmonkey rt73 driver in Ubuntu References: <20070521145039.9638.74833.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124201757.15176.18863.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- include serialmonkey rt73 driver in Ubuntu https://bugs.launchpad.net/bugs/115994 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:19:04 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:19:04 -0000 Subject: [Bug 108264] Re: RT73USB module is broken References: <20070420201911.732.98366.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124201905.14415.28957.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- RT73USB module is broken https://bugs.launchpad.net/bugs/108264 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:17:46 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:17:46 -0000 Subject: [Bug 102521] Re: Cannot set WEP key for Edimax EW-7318USg References: <20070403190514.1667.3216.malonedeb@gangotri.ubuntu.com> Message-ID: <20080124201746.15288.13983.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 115994 include serialmonkey rt73 driver in Ubuntu ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- Cannot set WEP key for Edimax EW-7318USg https://bugs.launchpad.net/bugs/102521 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:18:40 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:18:40 -0000 Subject: [Bug 89665] Re: rt73usb fails should use open source alternative References: <20070304142132.9114.79439.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124201840.14415.73140.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 13466 statically configured gateway addresses being lost on location switch ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- rt73usb fails should use open source alternative https://bugs.launchpad.net/bugs/89665 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:20:04 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:20:04 -0000 Subject: [Bug 87980] Re: rt73 module don't support HAL/neetworkManager References: <20070226083941.16581.92004.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124202004.15288.75134.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug is no longer a duplicate of bug 13466 statically configured gateway addresses being lost on location switch ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- rt73 module don't support HAL/neetworkManager https://bugs.launchpad.net/bugs/87980 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From oponek at gmail.com Thu Jan 24 20:36:33 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 20:36:33 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124203633.11447.40469.launchpad@gandwana.ubuntu.com> ** Description changed: - Ralink drivers are under heavy development. The legacy drivers should be - used in Ubuntu by default or the newest (next-generation) version BUT - ONLY when will offer the proper connection speed. Begginers won't fix - that bug because they won't know how to install that drivers with - module-assistant. Ralink cards should work out-of the box. - - The bug affects a lot of ralink-based cards so it's very important to be - fixed in Hardy! - - === The poll shows that most of the problems with wireless networking are problems with ralink cards in Ubuntu. POLL: What wireless chipset are you having a problem with in Gutsy? http://ubuntuforums.org/showthread.php?p=4178322 + + The bug occurs commonly and it's very important - and will be easy - to fix it. + ====================================== + + Cards don't work because of the invalid drivers (extremely slow + connection, no connection, connection lost, lack of the wpa support) + included in Ubuntu. + + Work-around: To install the proper driver from serialmonkey. + + SOLUTION: + 1. Find out which version of a serialmonkey driver works properly with each ralink card. + 2. Implement ralink serialmonkey drivers in Ubuntu. + + http://rt2x00.serialmonkey.com/ + + Most likely the newest CVS version of each ralink driver works + correctly. + === + Please write which drivers are known to work and which are invalid. + == - - The rt73 is known to work only with rt73-cvs-2007072709 version. - rt2400-source - source for rt2400 wireless network driver: Version: 1.2.2+cvs20070219-3 - rt2500-source - source for rt2500 wireless network driver: Version: 1:1.1.0-b4-4ubuntu1 - rt2570-source - RT2570 wireless network drivers source: Version: 1.1.0+cvs20070219-2 + Exemplary posts on ubuntuforums.org: Linksys WUSB54G V4 (rt2570-based card) http://ubuntuforums.org/showthread.php?t=588045 HOWTO: RT73 (RT71) serialmonkey drivers http://ubuntuforums.org/showthread.php?t=400236 - ====== - + ==================== + OLD BUG DESCRIPTION: + ==================== I configured my rt2400 card connection in network-admin succesfully but the connection is extremely slow. Ping works, but I can't get into any website, download packages through Synaptic even if waiting a few minutes. The card was recognized by Feisty as ra0, but now it's wlan0 in Gutsy. PING onet.pl (213.180.130.200) 56(84) bytes of data. 64 bytes from 213.180.130.200: icmp_seq=4 ttl=52 time=93.6 ms 64 bytes from 213.180.130.200: icmp_seq=5 ttl=52 time=82.8 ms 64 bytes from 213.180.130.200: icmp_seq=6 ttl=52 time=96.9 ms The problem does not occur when running Feisty and when running Gutsy with Feisty kernel (2.6.20.x). The newest Gutsy and Hardy kernel still generates problems with ralink card. The transfer rate is extremly low - 678 b/s - 1391 b/s. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From joetaylor_42 at hotmail.com Thu Jan 24 20:49:40 2008 From: joetaylor_42 at hotmail.com (Joe Taylor) Date: Thu, 24 Jan 2008 20:49:40 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gut References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> <20080124203633.11447.40469.launchpad@gandwana.ubuntu.com> Message-ID: Is there some problem with your email? I have received 27 mails from you in the last half an hour! Thanks, Joe. > From: oponek at gmail.com > To: joetaylor_42 at hotmail.com > Date: Thu, 24 Jan 2008 20:36:33 +0000 > Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy > > ** Description changed: > > - Ralink drivers are under heavy development. The legacy drivers should be > - used in Ubuntu by default or the newest (next-generation) version BUT > - ONLY when will offer the proper connection speed. Begginers won't fix > - that bug because they won't know how to install that drivers with > - module-assistant. Ralink cards should work out-of the box. > - > - The bug affects a lot of ralink-based cards so it's very important to be > - fixed in Hardy! > - > - > === > The poll shows that most of the problems with wireless networking are problems with ralink cards in Ubuntu. > POLL: What wireless chipset are you having a problem with in Gutsy? > http://ubuntuforums.org/showthread.php?p=4178322 > + > + The bug occurs commonly and it's very important - and will be easy - to fix it. > + ====================================== > + > + Cards don't work because of the invalid drivers (extremely slow > + connection, no connection, connection lost, lack of the wpa support) > + included in Ubuntu. > + > + Work-around: To install the proper driver from serialmonkey. > + > + SOLUTION: > + 1. Find out which version of a serialmonkey driver works properly with each ralink card. > + 2. Implement ralink serialmonkey drivers in Ubuntu. > + > + http://rt2x00.serialmonkey.com/ > + > + Most likely the newest CVS version of each ralink driver works > + correctly. > + > === > + Please write which drivers are known to work and which are invalid. > + == > > - > - The rt73 is known to work only with rt73-cvs-2007072709 version. > - rt2400-source - source for rt2400 wireless network driver: Version: 1.2.2+cvs20070219-3 > - rt2500-source - source for rt2500 wireless network driver: Version: 1:1.1.0-b4-4ubuntu1 > - rt2570-source - RT2570 wireless network drivers source: Version: 1.1.0+cvs20070219-2 > + Exemplary posts on ubuntuforums.org: > > Linksys WUSB54G V4 (rt2570-based card) > http://ubuntuforums.org/showthread.php?t=588045 > > HOWTO: RT73 (RT71) serialmonkey drivers > http://ubuntuforums.org/showthread.php?t=400236 > > - ====== > - > + ==================== > + OLD BUG DESCRIPTION: > + ==================== > I configured my rt2400 card connection in network-admin succesfully but the connection is extremely slow. > Ping works, but I can't get into any website, download packages through Synaptic even if waiting a few minutes. > The card was recognized by Feisty as ra0, but now it's wlan0 in Gutsy. > > PING onet.pl (213.180.130.200) 56(84) bytes of data. > 64 bytes from 213.180.130.200: icmp_seq=4 ttl=52 time=93.6 ms > 64 bytes from 213.180.130.200: icmp_seq=5 ttl=52 time=82.8 ms > 64 bytes from 213.180.130.200: icmp_seq=6 ttl=52 time=96.9 ms > > The problem does not occur when running Feisty and when running Gutsy > with Feisty kernel (2.6.20.x). The newest Gutsy and Hardy kernel still > generates problems with ralink card. The transfer rate is extremly low - > 678 b/s - 1391 b/s. > > -- > Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy > https://bugs.launchpad.net/bugs/134660 > You received this bug notification because you are a direct subscriber > of a duplicate bug. _________________________________________________________________ Free games, great prizes - get gaming at Gamesbox. http://www.searchgamesbox.com -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From frankgroeneveld at gmail.com Thu Jan 24 21:01:23 2008 From: frankgroeneveld at gmail.com (Frank Groeneveld) Date: Thu, 24 Jan 2008 21:01:23 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124210123.15288.11162.malone@gangotri.ubuntu.com> He was adding duplicates to this bugreport, to which you are subscribed also. (see link on the last lines of this message) -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From oponek at gmail.com Thu Jan 24 21:35:29 2008 From: oponek at gmail.com (Piotr Makowski) Date: Thu, 24 Jan 2008 21:35:29 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124213529.11341.46366.malone@gandwana.ubuntu.com> Frak, could you change the importance of this bug to high? I'm not allowed to do this. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From xty2acc at nerdshack.com Thu Jan 24 22:28:39 2008 From: xty2acc at nerdshack.com (Nattgew) Date: Thu, 24 Jan 2008 22:28:39 -0000 Subject: [Bug 55670] Re: The system freezes when load the module sis190 References: <20060808135647.9092.17114.malonedeb@gangotri.ubuntu.com> Message-ID: <20080124222840.14521.14047.launchpad@potassium.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: New => Confirmed -- The system freezes when load the module sis190 https://bugs.launchpad.net/bugs/55670 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From xty2acc at nerdshack.com Thu Jan 24 22:29:24 2008 From: xty2acc at nerdshack.com (Nattgew) Date: Thu, 24 Jan 2008 22:29:24 -0000 Subject: [Bug 55672] Re: Poor error message when hibernate fails due to small swap References: <20060808141046.9299.2810.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124222925.11341.72703.malone@gandwana.ubuntu.com> Is this still the case? -- Poor error message when hibernate fails due to small swap https://bugs.launchpad.net/bugs/55672 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From frankgroeneveld at gmail.com Thu Jan 24 22:26:01 2008 From: frankgroeneveld at gmail.com (Frank Groeneveld) Date: Thu, 24 Jan 2008 22:26:01 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> <20080124213529.11341.46366.malone@gandwana.ubuntu.com> Message-ID: <3FB35A8B-B280-43B4-A8EA-3A4EF146984E@gmail.com> I did that already, some developer changed it to a lower priority because this bug doesn't prevent your system from booting or anything :/ Op 24 jan 2008, om 22:35 heeft Piotr Makowski het volgende geschreven: > Frak, could you change the importance of this bug to high? I'm not > allowed to do this. > > -- > Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the > box in Gutsy/Hardy > https://bugs.launchpad.net/bugs/134660 > You received this bug notification because you are a direct subscriber > of the bug. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From xty2acc at nerdshack.com Thu Jan 24 22:40:59 2008 From: xty2acc at nerdshack.com (Nattgew) Date: Thu, 24 Jan 2008 22:40:59 -0000 Subject: [Bug 58314] Re: Computer totaly freezes after sleeping mode entering References: <20060831081619.26465.72568.malonedeb@gangotri.ubuntu.com> Message-ID: <20080124224059.15176.65927.malone@gangotri.ubuntu.com> Is this still a problem? Can you provide any log file details or debugging info? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: New => Incomplete -- Computer totaly freezes after sleeping mode entering https://bugs.launchpad.net/bugs/58314 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From xty2acc at nerdshack.com Thu Jan 24 22:42:53 2008 From: xty2acc at nerdshack.com (Nattgew) Date: Thu, 24 Jan 2008 22:42:53 -0000 Subject: [Bug 58035] Re: Driver for ralink rt73 chipset missing References: <20060828203816.5486.88256.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124224254.15288.82652.malone@gangotri.ubuntu.com> You say it's there now? I'm changing it to Fix Released... ** Changed in: linux-source-2.6.15 (Ubuntu) Status: New => Fix Released -- Driver for ralink rt73 chipset missing https://bugs.launchpad.net/bugs/58035 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From defconoii at gmail.com Thu Jan 24 22:49:01 2008 From: defconoii at gmail.com (Kyle M Weller) Date: Thu, 24 Jan 2008 22:49:01 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124224901.11236.67322.malone@gandwana.ubuntu.com> Ok here are the guidelines and they do not suggest anything to do with booting or not booting, it is a bug that impacts a large portion of ubuntu users. Kyle "Launchpad uses the following guidelines for assigning importance: Untriaged: the bug report has not be triaged yet. This is the default importance for new bugs. Wishlist: a request to add a new feature to one of the programs in Ubuntu. Use this for bugs which aren't really bugs but ideas for new features which do not yet exist. Low: bugs that affect functionality, but to a lesser extent than most bugs Medium: a functionality bug of the standard variety. Most bugs are of "Medium" severity. High: a bug that has a severe impact on a small portion of Ubuntu users (estimated) or has a moderate impact on a large portion of Ubuntu users (estimated) Critical: a bug which has a severe impact on a large portion of Ubuntu users." http://209.85.173.104/search?q=cache:Gf_8tlzpcOQJ:https://docteam.ubuntu.com/repos/trunk/generic/packagingguide/C/bugs.xml+importance+launchpad&hl=en&ct=clnk&cd=3&gl=us&client=firefox-a -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From defconoii at gmail.com Thu Jan 24 22:49:30 2008 From: defconoii at gmail.com (Kyle M Weller) Date: Thu, 24 Jan 2008 22:49:30 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124224930.11236.4108.malone@gandwana.ubuntu.com> So this should be marked as high -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From xty2acc at nerdshack.com Thu Jan 24 22:50:05 2008 From: xty2acc at nerdshack.com (Nattgew) Date: Thu, 24 Jan 2008 22:50:05 -0000 Subject: [Bug 55672] Re: Poor error message when hibernate fails due to small swap References: <20060808141046.9299.2810.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124225006.14521.87973.launchpad@potassium.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: New => Incomplete -- Poor error message when hibernate fails due to small swap https://bugs.launchpad.net/bugs/55672 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From xty2acc at nerdshack.com Thu Jan 24 22:54:30 2008 From: xty2acc at nerdshack.com (Nattgew) Date: Thu, 24 Jan 2008 22:54:30 -0000 Subject: [Bug 58035] Re: Driver for ralink rt73 chipset missing References: <20060828203816.5486.88256.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124225430.14415.1600.launchpad@potassium.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Released => Incomplete -- Driver for ralink rt73 chipset missing https://bugs.launchpad.net/bugs/58035 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From hermann at blaxhall.com Thu Jan 24 23:06:31 2008 From: hermann at blaxhall.com (_oOMOo_) Date: Thu, 24 Jan 2008 23:06:31 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124230631.15288.87304.malone@gangotri.ubuntu.com> I think this should be raised too. It is a shame IMHO that Gutsy was shipped with flaky drivers when the legacy ones worked perfectly well, as far as I can see simply because of a fixation with Network Manager. The Ubuntu Hardy source for rt2x00 dates back to early November; have Serialmonkey made no progress since then? The problem with Hardy as it stands 2.6.24-4 is that the legacy drivers do not work (in my experience), so we no longer have the option to compile and install a working older version. Whilst the drivers do not prevent the system booting, a laptop without a decent wireless connection is badly hamstrung. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From jjalocha at gmail.com Thu Jan 24 23:13:18 2008 From: jjalocha at gmail.com (Jerzy Jalocha N) Date: Thu, 24 Jan 2008 23:13:18 -0000 Subject: [Bug 104743] Re: wireless network (ralink usb) not working in feisty References: <20070409110020.11400.51644.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124231318.14521.17986.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- wireless network (ralink usb) not working in feisty https://bugs.launchpad.net/bugs/104743 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From patrice.karatchentzeff at gmail.com Thu Jan 24 23:12:10 2008 From: patrice.karatchentzeff at gmail.com (Patrice KARATCHENTZEFF) Date: Thu, 24 Jan 2008 23:12:10 -0000 Subject: [Bug 58314] Re: Computer totaly freezes after sleeping mode entering References: <20060831081619.26465.72568.malonedeb@gangotri.ubuntu.com> <20080124224059.15176.65927.malone@gangotri.ubuntu.com> Message-ID: <6ab2b3850801241512p293855bfj566bb4f35989348f@mail.gmail.com> 2008/1/24, Nattgew : > Is this still a problem? Can you provide any log file details or > debugging info? Yes : I finally isolated the problem : I got the same problem on the same machine by running an Etch Debian system. I removed the SATA and all the system runs over a real SCSI system. I have the same behaviour but hopefully, I got a log kernel message in a remote terminal: Message from syslogd at belledonne at Sat Jan 19 03:00:46 2008 ... belledonne kernel: Oops: 0000 [#1] Message from syslogd at belledonne at Sat Jan 19 03:00:46 2008 ... belledonne kernel: SMP ngue.francaise Message from syslogd at belledonne at Sat Jan 19 03:00:46 2008 ... belledonne kernel: CPU: 0 Message from syslogd at belledonne at Sat Jan 19 03:00:46 2008 ... belledonne kernel: EIP is at dqput+0xb/0x160 Message from syslogd at belledonne at Sat Jan 19 03:00:46 2008 ... belledonne kernel: esi: 00000001 edi: d88716bc ebp: dfb69f14 esp: dfb69ecc Message from syslogd at belledonne at Sat Jan 19 03:00:46 2008 ... belledonne kernel: ds: 007b es: 007b ss: 0068 Message from syslogd at belledonne at Sat Jan 19 03:00:46 2008 ... belledonne kernel: Process kswapd0 (pid: 180, ti=dfb68000 task=dffc7550 task.ti=dfb68000) Message from syslogd at belledonne at Sat Jan 19 03:00:46 2008 ... belledonne kernel: Stack: d88716bc c018146e c2ac63ec c2ac63ec f8a1c950 d88716bc d8871800 0000000e Message from syslogd at belledonne at Sat Jan 19 03:00:46 2008 ... belledonne kernel: c016f5f0 d88716c4 d88716bc c016f8b3 cbfc68b4 00000493 00000080 00000080 Message from syslogd at belledonne at Sat Jan 19 03:00:46 2008 ... belledonne kernel: c016fac2 00000080 c6f1c2d4 cae0d0dc 00026480 dfffeac0 000000ae 000000d0 Message from syslogd at belledonne at Sat Jan 19 03:00:46 2008 ... belledonne kernel: Call Trace:p:localhost} Message from syslogd at belledonne at Sat Jan 19 03:00:46 2008 ... belledonne kernel: Code: 10 00 8b 8c b7 84 00 00 00 89 f2 89 d8 ff 51 08 89 c3 89 e8 e8 05 2d 10 00 89 d8 5b 5e 5f 5d c3 85 c0 53 89 c3 0f 84 53 01 00 00 <8b> 40 30 85 c0 75 37 68 be 01 2a c0 e8 4b cc f9 ff 0f bf 43 54 Message from syslogd at belledonne at Sat Jan 19 03:00:46 2008 ... belledonne kernel: EIP: [] dqput+0xb/0x160 SS:ESP 0068:dfb69ecc Message from syslogd at belledonne at Sat Jan 19 03:00:46 2008 ... belledonne kernel: eax: 00004000 ebx: 00004000 ecx: 00000000 edx: 00000000 Belledonne is the Debian machine of course. Hope it can help to fix it... I decided to rid off this machine... I can't have an uptime over three ou four days... Thanks, PK -- |\ _,,,---,,_ Patrice KARATCHENTZEFF ZZZzz /,`.-'`' -. ;-;;,_ mailto:p.karatchentzeff at free.fr |,4- ) )-,_. ,\ ( `'-' http://p.karatchentzeff.free.fr '---''(_/--' `-'\_) -- Computer totaly freezes after sleeping mode entering https://bugs.launchpad.net/bugs/58314 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From jjalocha at gmail.com Thu Jan 24 23:20:21 2008 From: jjalocha at gmail.com (Jerzy Jalocha N) Date: Thu, 24 Jan 2008 23:20:21 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124232021.11341.46763.malone@gandwana.ubuntu.com> In the case of the duplicate Bug #104743, the problem seems to be fixed in Hardy. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From jjalocha at gmail.com Thu Jan 24 23:21:48 2008 From: jjalocha at gmail.com (Jerzy Jalocha N) Date: Thu, 24 Jan 2008 23:21:48 -0000 Subject: [Bug 48456] Re: kubuntu 6.06 LTS does not support Realtek 8139 network card References: <20060605021834.4978.67001.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124232149.14521.20339.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 90271 *** https://bugs.launchpad.net/bugs/90271 ** This bug has been marked a duplicate of bug 90271 Regression: RealTek 8139 hard-locks system on installation/modprobe (affects Averatec, Philips laptops) -- kubuntu 6.06 LTS does not support Realtek 8139 network card https://bugs.launchpad.net/bugs/48456 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From oli.maia at gmail.com Thu Jan 24 23:26:38 2008 From: oli.maia at gmail.com (Olivia) Date: Thu, 24 Jan 2008 23:26:38 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080124232638.14521.26187.malone@potassium.ubuntu.com> agreed! a laptop without a decent wireless connection is a big problem! this bug may not prevent anyone from booting, but it makes people have to boot every time the driver fails (at least that's how I'm dealing with it, considering I'm unable to do anything that involves compiling :-p). it's not lack of booting, it's too much booting :) -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From payne747 at yahoo.com Thu Jan 24 23:50:26 2008 From: payne747 at yahoo.com (Payne747) Date: Thu, 24 Jan 2008 23:50:26 -0000 Subject: [Bug 24776] Re: ipw2100 error Fatal interrupt. Scheduling firmware restart. References: <20060113143045.21012.26338.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080124235026.11447.53321.malone@gandwana.ubuntu.com> Started seeing this bug on IBM T40 straight after installation of Gutsy 7.10 (kernel 2.6.22-14-generic using ipw2100 module). Confirmed card\AP is OK using Windows. What's interesting is the bug seems to occur straight from CD, I'm able to detect local SSID's but unable to get dhcp response, on checking logs: kernel: [ 518.496000 ] ipw2100: Fatal interrupt. Scheduling firmware restart. I've applied all latest updates using ethernet but still no go. I'm using WEP encryption. -- ipw2100 error Fatal interrupt. Scheduling firmware restart. https://bugs.launchpad.net/bugs/24776 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From xty2acc at gmail.com Fri Jan 25 01:50:34 2008 From: xty2acc at gmail.com (Nattgew) Date: Fri, 25 Jan 2008 01:50:34 -0000 Subject: [Bug 64405] Re: low transmit power on Broadcom BCM4318 wifi adapter - very low range References: <20061006184553.8501.48781.malonedeb@gandwana.ubuntu.com> Message-ID: <20080125015035.29624.24470.malone@gandwana.ubuntu.com> Changed to incomplete, is it still present? ** Changed in: ndiswrapper (Ubuntu) Status: New => Incomplete -- low transmit power on Broadcom BCM4318 wifi adapter - very low range https://bugs.launchpad.net/bugs/64405 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From javierjc1982 at gmail.com Fri Jan 25 03:49:55 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 03:49:55 -0000 Subject: [Bug 159566] Re: rt61 edimax pci wifi card intermittent connection problems References: <20071102163742.9169.7722.malonedeb@gandwana.ubuntu.com> Message-ID: <20080125034955.29624.86957.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- rt61 edimax pci wifi card intermittent connection problems https://bugs.launchpad.net/bugs/159566 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 03:49:34 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 03:49:34 -0000 Subject: [Bug 159429] Re: rt61 doesn't work in gutsy (worked in feisty) References: <20071102053505.28500.37880.malonedeb@potassium.ubuntu.com> Message-ID: <20080125034936.29624.52260.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- rt61 doesn't work in gutsy (worked in feisty) https://bugs.launchpad.net/bugs/159429 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 03:48:53 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 03:48:53 -0000 Subject: [Bug 157953] Re: rt61 API breakage hardware not working IMPORTANT References: <20071028042325.2699.49064.malonedeb@potassium.ubuntu.com> Message-ID: <20080125034853.15288.70732.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- rt61 API breakage hardware not working IMPORTANT https://bugs.launchpad.net/bugs/157953 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 03:47:13 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 03:47:13 -0000 Subject: [Bug 150180] Re: nm-applet disconnects after irregular intervals References: <20071007130523.2149.71854.malonedeb@potassium.ubuntu.com> Message-ID: <20080125034713.29624.74782.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- nm-applet disconnects after irregular intervals https://bugs.launchpad.net/bugs/150180 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 03:46:41 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 03:46:41 -0000 Subject: [Bug 139832] Re: [gutsy] rt61 wireless stops working after several minutes References: <20070915184201.21095.10990.malonedeb@gandwana.ubuntu.com> Message-ID: <20080125034641.15288.52664.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- [gutsy] rt61 wireless stops working after several minutes https://bugs.launchpad.net/bugs/139832 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 03:46:25 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 03:46:25 -0000 Subject: [Bug 127290] Re: Wireless DLINK AirPlusG not working on Acer Travelmate References: <20070721012355.30349.45065.malonedeb@gangotri.ubuntu.com> Message-ID: <20080125034625.14415.98803.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- Wireless DLINK AirPlusG not working on Acer Travelmate https://bugs.launchpad.net/bugs/127290 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 03:46:01 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 03:46:01 -0000 Subject: [Bug 122838] Re: [WISH] Include support for RT61 wireless chipset by default References: <20070628151539.19858.8446.malonedeb@gangotri.ubuntu.com> Message-ID: <20080125034603.14415.42322.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- [WISH] Include support for RT61 wireless chipset by default https://bugs.launchpad.net/bugs/122838 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 03:45:34 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 03:45:34 -0000 Subject: [Bug 104282] Re: Add ralink patch to manage RT61 WPA References: <20070407221849.20780.36469.malonedeb@gangotri.ubuntu.com> Message-ID: <20080125034534.14521.45966.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- Add ralink patch to manage RT61 WPA https://bugs.launchpad.net/bugs/104282 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 03:51:03 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 03:51:03 -0000 Subject: [Bug 176542] Re: Wireless PCMCIA with rt61 still doesn't work References: <20071215133832.2858.5156.malonedeb@gangotri.ubuntu.com> Message-ID: <20080125035103.29476.78799.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- Wireless PCMCIA with rt61 still doesn't work https://bugs.launchpad.net/bugs/176542 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 03:50:32 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 03:50:32 -0000 Subject: [Bug 163561] Re: rt2x00-Driver for Ralink-wireless Devices fails for rt61 Cards, module rt61pci References: <20071118142855.13215.9688.malonedeb@gangotri.ubuntu.com> Message-ID: <20080125035032.15288.84880.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- rt2x00-Driver for Ralink-wireless Devices fails for rt61 Cards, module rt61pci https://bugs.launchpad.net/bugs/163561 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 03:53:06 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 03:53:06 -0000 Subject: [Bug 144239] Re: bug wifi rt61 gutsy References: <20070923150349.15978.20564.malonedeb@gangotri.ubuntu.com> Message-ID: <20080125035306.14521.23886.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- bug wifi rt61 gutsy https://bugs.launchpad.net/bugs/144239 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 03:58:42 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 03:58:42 -0000 Subject: [Bug 135630] Re: rt61pci freezes system while trying to connect References: <20070829184034.8416.7698.malonedeb@gandwana.ubuntu.com> Message-ID: <20080125035842.14415.63924.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- rt61pci freezes system while trying to connect https://bugs.launchpad.net/bugs/135630 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 04:04:11 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 04:04:11 -0000 Subject: [Bug 181320] Re: [hardy] Restricted Driver Manager does not install rt73usb firmware References: <20080108184156.7546.46461.malonedeb@gangotri.ubuntu.com> Message-ID: <20080125040411.29476.66039.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- [hardy] Restricted Driver Manager does not install rt73usb firmware https://bugs.launchpad.net/bugs/181320 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 04:03:15 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 04:03:15 -0000 Subject: [Bug 180664] Re: WPA will not connect with Ralink RT73 driver References: <20080105233431.6444.36498.malonedeb@gandwana.ubuntu.com> Message-ID: <20080125040315.14521.71899.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- WPA will not connect with Ralink RT73 driver https://bugs.launchpad.net/bugs/180664 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 04:02:43 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 04:02:43 -0000 Subject: [Bug 178949] Re: RaLink 2500 Cardbus/mini-PCI not working References: <20071227210053.16456.300.malonedeb@potassium.ubuntu.com> Message-ID: <20080125040244.14415.74948.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- RaLink 2500 Cardbus/mini-PCI not working https://bugs.launchpad.net/bugs/178949 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 04:01:56 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 04:01:56 -0000 Subject: [Bug 154524] Re: Low data rates with Ralink RT2500 PCI WLAN card References: <20071019184135.11233.50584.malonedeb@potassium.ubuntu.com> Message-ID: <20080125040156.14415.65110.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- Low data rates with Ralink RT2500 PCI WLAN card https://bugs.launchpad.net/bugs/154524 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 04:01:24 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 04:01:24 -0000 Subject: [Bug 152456] Re: rt73 disconnects and crashes usb References: <20071013213716.12259.81725.malonedeb@gangotri.ubuntu.com> Message-ID: <20080125040125.15176.38345.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- rt73 disconnects and crashes usb https://bugs.launchpad.net/bugs/152456 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Fri Jan 25 04:05:37 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Fri, 25 Jan 2008 04:05:37 -0000 Subject: [Bug 183752] Re: PC11B2 (RT2400) LOW - GUTSY References: <20080117123222.26683.50504.malonedeb@potassium.ubuntu.com> Message-ID: <20080125040537.29624.69408.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- PC11B2 (RT2400) LOW - GUTSY https://bugs.launchpad.net/bugs/183752 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From uncommonnonsense at gmail.com Fri Jan 25 07:39:18 2008 From: uncommonnonsense at gmail.com (NoWhereMan) Date: Fri, 25 Jan 2008 07:39:18 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080125073918.15176.87312.malone@gangotri.ubuntu.com> oh, I have to add I'd prefer to have a working rt61pci+n-m instead of rt61 legacy which doesn't work with n-m for crypted connections! -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From uncommonnonsense at gmail.com Fri Jan 25 07:37:03 2008 From: uncommonnonsense at gmail.com (NoWhereMan) Date: Fri, 25 Jan 2008 07:37:03 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080125073703.14521.29854.malone@potassium.ubuntu.com> rt61pci actually *does* work in hardy and it almost does in gutsy in gutsy sources are OLD and must be updated, otherwise the driver bugs after a few minutes, and you have unload/reload it, if it was to be updated it should work as in hardy: in hardy it *almost* works which means I've found I can connect using WPA via command line using # wpa_connect -B -dwlan0 -dext ... etc etc and then issuing # dhclient wlan0 I've also recently discovered I could make it work with wifi-radar, but I can't using network-manager; wicd didn't work too, and anyway i don't like wicd The driver seems to work perfectly with OPEN networks bye -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From frankgroeneveld at gmail.com Fri Jan 25 07:33:53 2008 From: frankgroeneveld at gmail.com (Frank Groeneveld) Date: Fri, 25 Jan 2008 07:33:53 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> <20080124232638.14521.26187.malone@potassium.ubuntu.com> Message-ID: I totally agree, but that's what the dev said and only devs can set the priority. Op 25 jan 2008, om 00:26 heeft Olivia het volgende geschreven: > agreed! > a laptop without a decent wireless connection is a big problem! > > this bug may not prevent anyone from booting, but it makes people have > to boot every time the driver fails (at least that's how I'm dealing > with it, considering I'm unable to do anything that involves compiling > :-p). it's not lack of booting, it's too much booting :) > > -- > Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the > box in Gutsy/Hardy > https://bugs.launchpad.net/bugs/134660 > You received this bug notification because you are a direct subscriber > of the bug. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From ketil at ii.uib.no Fri Jan 25 12:25:27 2008 From: ketil at ii.uib.no (Ketil Malde) Date: Fri, 25 Jan 2008 12:25:27 -0000 Subject: [Bug 137963] Re: [Gusty] ipw3945abg does not work with 802.11b-only WLANs References: <20070907123430.10966.39313.malonedeb@potassium.ubuntu.com> Message-ID: <20080125122527.15176.99785.malone@gangotri.ubuntu.com> Nothing continues to happen.... it was recently brought to my attention that Intel has their own driver project for this card, called iwlwifi. Debian instructions here: http://www.nanonanonano.net/linux/debian/iwlwifi Does anybody know if that will solve this problem? -k -- [Gusty] ipw3945abg does not work with 802.11b-only WLANs https://bugs.launchpad.net/bugs/137963 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From lauri at ksenos.fi Fri Jan 25 13:26:02 2008 From: lauri at ksenos.fi (Lauri Nurmi) Date: Fri, 25 Jan 2008 13:26:02 -0000 Subject: [Bug 65631] Re: skge driver broken: invalid call to spin_unlock causes system crash References: <20061012083235.19052.7863.malonedeb@gandwana.ubuntu.com> Message-ID: <20080125132602.29624.97771.malone@gandwana.ubuntu.com> The latest Dapper kernel, 2.6.15-51-686, will still easily crash due to skge. Please see attached log. ** Attachment added: "skge.log" http://launchpadlibrarian.net/11562782/skge.log -- skge driver broken: invalid call to spin_unlock causes system crash https://bugs.launchpad.net/bugs/65631 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From jjalocha at gmail.com Fri Jan 25 14:02:13 2008 From: jjalocha at gmail.com (Jerzy Jalocha N) Date: Fri, 25 Jan 2008 14:02:13 -0000 Subject: [Bug 45146] Re: Hard lockup using realtek wireless since 2.6.15-22 References: <20060516233856.15848.92379.malonedeb@gangotri.ubuntu.com> Message-ID: <20080125140213.14415.70793.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 31857 *** https://bugs.launchpad.net/bugs/31857 ** This bug has been marked a duplicate of bug 31857 r818x driver freezes randomly -- Hard lockup using realtek wireless since 2.6.15-22 https://bugs.launchpad.net/bugs/45146 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From spamsuckz at freenet.de Fri Jan 25 16:15:47 2008 From: spamsuckz at freenet.de (blackelvis) Date: Fri, 25 Jan 2008 16:15:47 -0000 Subject: [Bug 67256] Re: "-generic" kernel doesn't boot in Gutsy on some occasions, freezes at the splash screen and then drops to initramfs prompt References: <20061020224046.29371.57259.malonedeb@gandwana.ubuntu.com> Message-ID: <20080125161547.29476.5862.malone@gandwana.ubuntu.com> Got this problem on an AMD K7 desktop machine instead of an Acer laptop. Occasionally drops into the initramfs prompt on boot, sometimes only once in a few weeks, sometimes several times a day. -- Failure to mount root filesystem, cause unknown https://bugs.launchpad.net/bugs/67256 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From darthanubis at gmail.com Fri Jan 25 16:29:48 2008 From: darthanubis at gmail.com (darthanubis) Date: Fri, 25 Jan 2008 16:29:48 -0000 Subject: [Bug 185961] [NEW] linux-image-2.6.24-5-server stall upon bootup at usbhid References: <20080125162948.14521.69866.malonedeb@potassium.ubuntu.com> Message-ID: <20080125162948.14521.69866.malonedeb@potassium.ubuntu.com> Public bug reported: Binary package hint: linux-image linux-image-2.6.24-5-server stall upon boot at usbhid load just as the previous -4-server kernel does. I'm currently using the -3-server kernel as it is the only that boots. 2.6.24-3-server #1 SMP Thu Jan 3 23:20:57 UTC 2008 x86_64 GNU/Linux cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=8.04 DISTRIB_CODENAME=hardy DISTRIB_DESCRIPTION="Ubuntu hardy (development branch)" ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- linux-image-2.6.24-5-server stall upon bootup at usbhid https://bugs.launchpad.net/bugs/185961 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From leann at ubuntu.com Fri Jan 25 17:22:07 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Fri, 25 Jan 2008 17:22:07 -0000 Subject: [Bug 12519] Re: Removing modular bay drive causes system freeze References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080125172207.14415.17983.malone@potassium.ubuntu.com> Hi Noel, It might be good if you test with the latest published kernel - 2.6.24-5.9 (https://launchpad.net/ubuntu/+source/linux) It was most recently sync'd wih the 2.6.24 release of the upstream mainline kernel. Thanks! -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From jo at josippie.com Fri Jan 25 18:55:48 2008 From: jo at josippie.com (jo) Date: Fri, 25 Jan 2008 18:55:48 -0000 Subject: [Bug 36462] Re: optical mouse problem References: <20060324175400.6279.66012.malonedeb@gandwana.ubuntu.com> Message-ID: <20080125185548.15176.24782.malone@gangotri.ubuntu.com> Hi, I'm an amateur, hoping you can help. Have used a wired optical mouse (Micro Innovations) with no problems for about 2 years, then whammo, the light starts going off and on during use, thus freezing my mouse's movements intermittenly. There are no connection problems. Nothing wrong with the driver. Something wrong with the light? Thanks, jo -- optical mouse problem https://bugs.launchpad.net/bugs/36462 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From noel at devtech.com Fri Jan 25 20:08:09 2008 From: noel at devtech.com (Noel J. Bergman) Date: Fri, 25 Jan 2008 20:08:09 -0000 Subject: [Bug 12519] Re: Removing modular bay drive causes system freeze References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080125200809.14415.46705.malone@potassium.ubuntu.com> Leann, Done. It didn't work. I will attach the logs you've previously requested. BUT ... I also have an additional data point for you this time. Although nothing showed up in the logs, I happened to be using console 1 instead of the gnome session when I pulled the drive, and there was output to the console: ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen ata4: ACPI event After rebooting, I did a grep for frozen in /var/log, and found nothing. ** Attachment added: "dmesg.log" http://launchpadlibrarian.net/11569938/dmesg.log -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From noel at devtech.com Fri Jan 25 20:08:28 2008 From: noel at devtech.com (Noel J. Bergman) Date: Fri, 25 Jan 2008 20:08:28 -0000 Subject: [Bug 12519] Re: Removing modular bay drive causes system freeze References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080125200828.14415.57879.malone@potassium.ubuntu.com> ** Attachment added: "lspci-vvnn.log" http://launchpadlibrarian.net/11569951/lspci-vvnn.log -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From noel at devtech.com Fri Jan 25 20:16:06 2008 From: noel at devtech.com (Noel J. Bergman) Date: Fri, 25 Jan 2008 20:16:06 -0000 Subject: [Bug 12519] Re: Removing modular bay drive causes system freeze References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080125201606.24738.89565.malone@potassium.ubuntu.com> I booted to my BIOS and doublechecked the configuration. The hot-bay is configured for AHCI, not "Compatibility". Again, this is the same configuration that works with Gutsy. -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From noel at devtech.com Fri Jan 25 20:25:53 2008 From: noel at devtech.com (Noel J. Bergman) Date: Fri, 25 Jan 2008 20:25:53 -0000 Subject: [Bug 12519] Re: Removing modular bay drive causes system freeze References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080125202554.16215.90472.malone@gandwana.ubuntu.com> Rebooted and tried Compatibility mode instead of AHCI. No difference, except that it was ata2 instead of ata4 when the error appeared on the console. -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From stephan.klein at gmx.at Fri Jan 25 21:38:58 2008 From: stephan.klein at gmx.at (Stephan Klein) Date: Fri, 25 Jan 2008 21:38:58 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080125213858.24838.77508.malone@potassium.ubuntu.com> No, the original bug is still not fixed. Comment #21 (https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/159241/comments/21) was not related to it. With the -5 kernel I still get the messages in question: [ 28.446142] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 [ 28.446217] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 [ 28.446286] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 [ 28.446354] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 [ 28.446423] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2 [ 28.446491] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2 [ 28.446649] PCI: Cannot allocate resource region 0 of device 0000:06:00.0 ** Changed in: linux (Ubuntu Hardy) Status: Fix Released => Confirmed -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From harry at ijscoboer.nl Fri Jan 25 22:04:04 2008 From: harry at ijscoboer.nl (harrydb) Date: Fri, 25 Jan 2008 22:04:04 -0000 Subject: [Bug 183174] Re: Tickless idle not working on AMD Turion 64 X2 (inspiron laptop) References: <20080115130751.30605.85385.malonedeb@gandwana.ubuntu.com> Message-ID: <20080125220404.16215.36498.malone@gandwana.ubuntu.com> I found this thread from a kernel mailing list that discusses the issue. http://www.mail-archive.com/linux-kernel at vger.kernel.org/msg240281.html >From what I understand there is a patch but not one that has advantages over the current situation so I guess this is a won't fix for now. -- Tickless idle not working on AMD Turion 64 X2 (inspiron laptop) https://bugs.launchpad.net/bugs/183174 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From janaskhoej at gmail.com Fri Jan 25 23:06:10 2008 From: janaskhoej at gmail.com (Jan Ask) Date: Fri, 25 Jan 2008 23:06:10 -0000 Subject: [Bug 29987] Re: [sonypi] Not work Fn keys on Sony VAIO VGN-FS* References: <20060129140914.9344.99738.malonedeb@gandwana.ubuntu.com> Message-ID: <20080125230610.21801.88629.malone@gangotri.ubuntu.com> Confirmed. Function keys don't work on this Vaio vgn-tz50b. Tested with Hardy daily build 25/1/2008 -- [sonypi] Not work Fn keys on Sony VAIO VGN-FS* https://bugs.launchpad.net/bugs/29987 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From heruan at aldu.net Fri Jan 25 23:49:02 2008 From: heruan at aldu.net (Giovanni Lovato) Date: Fri, 25 Jan 2008 23:49:02 -0000 Subject: [Bug 42520] Re: Fan NEVER goes off on thinkpad r50e References: <20060502061656.16712.14431.malonedeb@gandwana.ubuntu.com> Message-ID: <20080125234902.24738.63464.launchpad@potassium.ubuntu.com> ** Also affects: linux-source-2.6.24 (Ubuntu) Importance: Undecided Status: New -- Fan NEVER goes off on thinkpad r50e https://bugs.launchpad.net/bugs/42520 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From heruan at aldu.net Fri Jan 25 23:54:22 2008 From: heruan at aldu.net (Giovanni Lovato) Date: Fri, 25 Jan 2008 23:54:22 -0000 Subject: [Bug 42520] Re: Fan NEVER goes off on thinkpad r50e References: <20060502061656.16712.14431.malonedeb@gandwana.ubuntu.com> Message-ID: <20080125235422.21897.7957.malone@gangotri.ubuntu.com> Same problem on Acer TM8204, Intel Centrino Duo. The fan starts at maximum speed after 10 minutes of use and then won't stop until shutdown or reboot. No matter of CPU utilization or AC/battery power. /proc/acpi/fan/ is empty, CPU throttling seems not to do anything: # acpi -t Battery 1: charging, 43%, 00:03:18 until charged Thermal 1: ok, 87.0 degrees C # cat /proc/acpi/processor/*/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% -- Fan NEVER goes off on thinkpad r50e https://bugs.launchpad.net/bugs/42520 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From javierjc1982 at gmail.com Sat Jan 26 02:12:42 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Sat, 26 Jan 2008 02:12:42 -0000 Subject: [Bug 108691] Re: Kernel module rt2500 has awful performance References: <20070421211025.781.98695.malonedeb@gandwana.ubuntu.com> Message-ID: <20080126021242.16215.15766.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- Kernel module rt2500 has awful performance https://bugs.launchpad.net/bugs/108691 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From darthanubis at gmail.com Sat Jan 26 04:56:46 2008 From: darthanubis at gmail.com (darthanubis) Date: Sat, 26 Jan 2008 04:56:46 -0000 Subject: [Bug 186102] [NEW] package linux-image-server 2.6.24.5.6 failed to install/upgrade: dependency problems - leaving unconfigured References: <20080126045647.21801.16782.malonedeb@gangotri.ubuntu.com> Message-ID: <20080126045647.21801.16782.malonedeb@gangotri.ubuntu.com> Public bug reported: Failed install ProblemType: Package Architecture: amd64 Date: Fri Jan 25 23:53:23 2008 DistroRelease: Ubuntu 8.04 ErrorMessage: dependency problems - leaving unconfigured NonfreeKernelModules: nvidia Package: linux-image-server 2.6.24.5.6 PackageArchitecture: amd64 SourcePackage: linux-meta Title: package linux-image-server 2.6.24.5.6 failed to install/upgrade: dependency problems - leaving unconfigured Uname: Linux amd 2.6.24-3-server #1 SMP Thu Jan 3 23:20:57 UTC 2008 x86_64 GNU/Linux ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package -- package linux-image-server 2.6.24.5.6 failed to install/upgrade: dependency problems - leaving unconfigured https://bugs.launchpad.net/bugs/186102 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From darthanubis at gmail.com Sat Jan 26 04:56:46 2008 From: darthanubis at gmail.com (darthanubis) Date: Sat, 26 Jan 2008 04:56:46 -0000 Subject: [Bug 186102] Re: package linux-image-server 2.6.24.5.6 failed to install/upgrade: dependency problems - leaving unconfigured References: <20080126045647.21801.16782.malonedeb@gangotri.ubuntu.com> Message-ID: <20080126045647.21801.98810.malone@gangotri.ubuntu.com> ** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/11573423/Dependencies.txt ** Attachment added: "DpkgTerminalLog.gz" http://launchpadlibrarian.net/11573424/DpkgTerminalLog.gz -- package linux-image-server 2.6.24.5.6 failed to install/upgrade: dependency problems - leaving unconfigured https://bugs.launchpad.net/bugs/186102 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From oxmosys at gmail.com Sat Jan 26 06:37:29 2008 From: oxmosys at gmail.com (=?utf-8?q?Sa=C3=AFvann_Carignan?=) Date: Sat, 26 Jan 2008 06:37:29 -0000 Subject: [Bug 62607] Re: Multiple cifs issues - CIFS: reset ATTR_READONLY on Windows References: <20060927120448.10311.20367.malonedeb@gandwana.ubuntu.com> Message-ID: <20080126063729.30899.25555.malone@gangotri.ubuntu.com> This bug describe more than one issue. In order to help developers, it's always a good idea to separate bugs to make sure that they get all fixed. Linux ubuntu Gutsy is now released. Can you confirm if this bug is now fixed for you? -- Multiple cifs issues - CIFS: reset ATTR_READONLY on Windows https://bugs.launchpad.net/bugs/62607 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From viking at f2s.com Sat Jan 26 10:30:22 2008 From: viking at f2s.com (viking777) Date: Sat, 26 Jan 2008 10:30:22 -0000 Subject: [Bug 186124] [NEW] Blank screen with lates restricted-modules update References: <20080126103022.16311.87474.malonedeb@gandwana.ubuntu.com> Message-ID: <20080126103022.16311.87474.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-restricted-modules Ever since the linux-restricted-modules was upgraded from version 2.6.24.5-4.12 I have been unable to boot kubuntu Hardy. I have tried version 2.6.24.6-4.15 and 2.6.24.6-5.16 on both kernel 2.6.24.4 and 2.6.24.5 and on all occasions the boot proceeds normally until 'Loading K display manager' after which I am left with nothing but a black screen. It is not possible to even get a console login from this point, the only option is to reboot with Ctl/Alt /Del. In order to continue using Hardy I have had to restore a disk image of the 2.6.24.4 kernel with linux-restricted-module 2.6.24.5-4.12 on it which works normally. Kubuntu Hardy64bit, Intel 64bit dual core processor, ATI Radeon Mobility X1600 graphics card.. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- Blank screen with lates restricted-modules update https://bugs.launchpad.net/bugs/186124 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From erlenmayr at gmail.com Sat Jan 26 11:20:37 2008 From: erlenmayr at gmail.com (Erlenmayr) Date: Sat, 26 Jan 2008 11:20:37 -0000 Subject: [Bug 90283] Re: make-kpkg with ubuntu sources creates gigantic package References: <20070307025345.16907.29057.malonedeb@gandwana.ubuntu.com> Message-ID: <20080126112037.16311.90373.malone@gandwana.ubuntu.com> The same problem occurs, when I compile the vanilla kernel sources (2.6.24) with kpkg-make on Ubuntu (Gutsy) on the 64 bit version (Core 2 Duo processor). -- make-kpkg with ubuntu sources creates gigantic package https://bugs.launchpad.net/bugs/90283 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for kernel-package in ubuntu. From mx82 at freenet.de Sat Jan 26 11:23:58 2008 From: mx82 at freenet.de (mx82) Date: Sat, 26 Jan 2008 11:23:58 -0000 Subject: [Bug 88530] Re: USB ports: connect-debounce failed, port disabled References: <20070227225858.22094.98179.malonedeb@gandwana.ubuntu.com> Message-ID: <20080126112358.21897.44918.malone@gangotri.ubuntu.com> The problem isn't solved for my notebook: [ 256.961178] hub 5-0:1.0: connect-debounce failed, port 6 disabled Perhaps Ubuntu fix the problem only for x86_64. uname -a Linux ubuntu 2.6.24-4-generic #1 SMP Mon Jan 14 17:30:39 UTC 2008 i686 GNU/Linux Notebook: Amilo Pro V3205 with BIOS 1.10 ** Attachment added: "dmesg" http://launchpadlibrarian.net/11576052/dmesg.txt -- USB ports: connect-debounce failed, port disabled https://bugs.launchpad.net/bugs/88530 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From benjamin.drung at gmail.com Sat Jan 26 16:04:01 2008 From: benjamin.drung at gmail.com (Benjamin Drung) Date: Sat, 26 Jan 2008 16:04:01 -0000 Subject: [Bug 88530] Re: USB ports: connect-debounce failed, port disabled References: <20070227225858.22094.98179.malonedeb@gandwana.ubuntu.com> Message-ID: <20080126160401.29672.38852.malone@potassium.ubuntu.com> I testet now the i386 hardy devel version. There is still the bug. So it is only solved for x86_64 and not for i386 (as mx82 assumed). Notebook: FSC Amilo Si 1520 with BIOS 1.10 -- USB ports: connect-debounce failed, port disabled https://bugs.launchpad.net/bugs/88530 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From wolfger at gmail.com Sat Jan 26 16:56:57 2008 From: wolfger at gmail.com (wolfger) Date: Sat, 26 Jan 2008 16:56:57 -0000 Subject: [Bug 138440] Re: P4 Hyperthread enabled wont boot generic Kernel References: <20070909163236.25002.1792.malonedeb@gangotri.ubuntu.com> Message-ID: <20080126165658.29672.18621.malone@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 Was to be marked as dupe of bug #139070, but wasn't. Now marking as dupe of bug #134660 which that bug has been marked a dupe of. ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- P4 Hyperthread enabled wont boot generic Kernel https://bugs.launchpad.net/bugs/138440 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From crimsun at fungus.sh.nu Sat Jan 26 17:15:02 2008 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Sat, 26 Jan 2008 17:15:02 -0000 Subject: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080126171502.24836.99404.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Incomplete => Won't Fix -- Fail to boot smp kernel https://bugs.launchpad.net/bugs/24533 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From lemsx1 at gmail.com Sat Jan 26 18:11:56 2008 From: lemsx1 at gmail.com (LuisMondesi) Date: Sat, 26 Jan 2008 18:11:56 -0000 Subject: [Bug 97105] Re: samba causes nfsv4 kernel module bug References: <20070327192524.27963.25588.malonedeb@gangotri.ubuntu.com> Message-ID: <20080126181156.21801.13299.malone@gangotri.ubuntu.com> This happened to me on Gutsy on 2 different systems on 2 different networks and the NFSv4 server is Solaris on one and Debian Etch on the other. I don't think this has anything to do with Samba. NFSv3 works. $> uname -a Linux tuxy 2.6.22-14-generic #1 SMP Tue Dec 18 08:02:57 UTC 2007 i686 GNU/Linux >From syslog: Jan 26 13:06:41 tuxy kernel: [46339.248764] BUG: unable to handle kernel paging request at virtual address 0007004a Jan 26 13:06:41 tuxy kernel: [46339.248769] printing eip: Jan 26 13:06:41 tuxy kernel: [46339.248770] f918e043 Jan 26 13:06:41 tuxy kernel: [46339.248772] *pde = 00000000 Jan 26 13:06:41 tuxy kernel: [46339.248775] Oops: 0000 [#1] Jan 26 13:06:41 tuxy kernel: [46339.248777] SMP Jan 26 13:06:41 tuxy kernel: [46339.248780] Modules linked in: nls_cp437 isofs aes cbc blkcipher vmnet(P) vmblock(P) vmmon(P) binfmt_misc rfcomm l2cap bluetooth nfsd exportfs ppdev autofs4 video sbs button dock container ac battery cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand freq_table cpufreq_conservative nfs lockd sunrpc iptable_raw xt_comment xt_policy xt_multiport ipt_ULOG ipt_TTL ipt_ttl ipt_TOS ipt_tos ipt_SAME ipt_REJECT ipt_REDIRECT ipt_recent ipt_owner ipt_NETMAP ipt_MASQUERADE ipt_LOG ipt_iprange ipt_ECN ipt_ecn ipt_CLUSTERIP ipt_ah ipt_addrtype nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_pptp nf_nat_proto_gre nf_nat_irc nf_nat_h323 nf_nat_ftp nf_nat_amanda ts_kmp nf_conntrack_amanda nf_conntrack_tftp nf_conntrack_sip nf_conntrack_proto_sctp nf_conntrack_pptp nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_netbios_ns nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp xt_tcpmss xt_pkttype xt_physdev xt_NFQUEUE xt_NFLOG xt_MARK xt_mark xt_mac xt_limit xt_length xt_ Jan 26 13:06:41 tuxy kernel: elper xt_hashlimit ip6_tables xt_dccp xt_conntrack xt_CONNMARK xt_connmark xt_CLASSIFY xt_tcpudp xt_state iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack iptable_mangle nfnetlink iptable_filter ip_tables x_tables af_packet xfs sd_mod sg w83627hf hwmon_vid serpent cryptoloop loop lp snd_mpu401 snd_mpu401_uart snd_hda_intel snd_pcm_oss snd_pcm snd_mixer_oss snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq usb_storage snd_timer cpia_usb libusual xpad nvidia(P) snd_seq_device irtty_sir cpia compat_ioctl32 videodev v4l2_common v4l1_compat i2c_viapro ipv6 sir_dev psmouse snd parport_pc parport irda pcspkr i2c_core via_agp shpchp pci_hotplug serio_raw evdev agpgart soundcore snd_page_alloc crc_ccitt ext3 jbd mbcache ide_cd cdrom ide_disk sata_via usbhid hid ata_generic floppy ehci_hcd via_rhine mii via82cxxx ide_core libata scsi_mod uhci_hcd ohci_hcd usbcore dm_mirror dm_snapshot dm_mod thermal processor fan capability commoncap fuse fbcon tileblit font bit Jan 26 13:06:41 tuxy kernel: softcursor Jan 26 13:06:41 tuxy kernel: [46339.248921] CPU: 0 Jan 26 13:06:41 tuxy kernel: [46339.248922] EIP: 0060:[] Tainted: P VLI Jan 26 13:06:41 tuxy kernel: [46339.248923] EFLAGS: 00010206 (2.6.22-14-generic #1) Jan 26 13:06:41 tuxy kernel: [46339.248940] EIP is at nfs_fhget+0xd3/0x3e0 [nfs] Jan 26 13:06:41 tuxy kernel: [46339.248942] eax: 0007003e ebx: 00000000 ecx: f0fd7874 edx: 00004180 Jan 26 13:06:41 tuxy kernel: [46339.248945] esi: f0fd7800 edi: cecedbd4 ebp: ea1cc128 esp: cecedb88 Jan 26 13:06:41 tuxy kernel: [46339.248948] ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Jan 26 13:06:41 tuxy kernel: [46339.248951] Process mount.nfs4 (pid: 13914, ti=cecec000 task=cf2b6530 task.ti=cecec000) Jan 26 13:06:41 tuxy kernel: [46339.248953] Stack: f918df10 cecedbac 00000020 c0133462 cb398780 ea1cc000 00afc7a9 c02bd89d Jan 26 13:06:41 tuxy kernel: [46339.248960] 00000282 cecedc66 cecedbd4 cecedbd4 f0fd7800 cecedc64 cecedd1e f918c8d7 Jan 26 13:06:41 tuxy kernel: [46339.248967] cf2b66f0 c200a000 f0fd7a00 00000002 00000000 00000000 00000000 00000000 Jan 26 13:06:41 tuxy kernel: [46339.248973] Call Trace: Jan 26 13:06:41 tuxy kernel: [46339.248977] [] nfs_init_locked+0x0/0x60 [nfs] Jan 26 13:06:41 tuxy kernel: [46339.249025] [group_send_sig_info+114/128] group_send_sig_info+0x72/0x80 Jan 26 13:06:41 tuxy kernel: [46339.249085] [tcp_send_fin+125/320] tcp_send_fin+0x7d/0x140 Jan 26 13:06:41 tuxy kernel: [46339.249213] [] nfs4_get_root+0x177/0x260 [nfs] Jan 26 13:06:41 tuxy kernel: [46339.250526] [] nfs4_get_sb+0x291/0x370 [nfs] Jan 26 13:06:42 tuxy kernel: [46339.251460] [vfs_kern_mount+182/304] vfs_kern_mount+0xb6/0x130 Jan 26 13:06:42 tuxy kernel: [46339.251633] [do_kern_mount+63/240] do_kern_mount+0x3f/0xf0 Jan 26 13:06:42 tuxy kernel: [46339.251741] [do_mount+1643/1856] do_mount+0x66b/0x740 Jan 26 13:06:42 tuxy kernel: [46339.251901] [tcp_v4_send_check+68/240] tcp_v4_send_check+0x44/0xf0 Jan 26 13:06:42 tuxy kernel: [46339.252007] [tcp_transmit_skb+1017/2048] tcp_transmit_skb+0x3f9/0x800 Jan 26 13:06:42 tuxy kernel: [46339.252029] [sock_aio_read+287/304] sock_aio_read+0x11f/0x130 Jan 26 13:06:42 tuxy kernel: [46339.252118] [__handle_mm_fault+1671/2816] __handle_mm_fault+0x687/0xb00 Jan 26 13:06:42 tuxy kernel: [46339.252241] [mod_timer+24/64] mod_timer+0x18/0x40 Jan 26 13:06:42 tuxy kernel: [46339.252532] [do_page_fault+905/1680] do_page_fault+0x389/0x690 Jan 26 13:06:42 tuxy kernel: [46339.252859] [error_code+114/128] error_code+0x72/0x80 Jan 26 13:06:42 tuxy kernel: [46339.253015] [clip_constructor+8/160] clip_constructor+0x8/0xa0 Jan 26 13:06:42 tuxy kernel: [46339.253037] [copy_mount_options+171/336] copy_mount_options+0xab/0x150 Jan 26 13:06:42 tuxy kernel: [46339.253210] [sys_mount+119/192] sys_mount+0x77/0xc0 Jan 26 13:06:42 tuxy kernel: [46339.253332] [sysenter_past_esp+107/169] sysenter_past_esp+0x6b/0xa9 Jan 26 13:06:42 tuxy kernel: [46339.253488] [clip_ioctl+1088/1296] clip_ioctl+0x440/0x510 Jan 26 13:06:42 tuxy kernel: [46339.253626] ======================= Jan 26 13:06:42 tuxy kernel: [46339.253628] Code: ff 89 44 24 14 89 54 24 18 81 8d 3c 01 00 00 82 00 00 00 89 5d 20 8b 57 20 66 89 55 6a 8b 86 64 01 00 00 0f b7 d2 8b 00 8b 40 38 <8b> 40 0c 89 85 90 00 00 00 89 d0 25 00 f0 00 00 3d 00 80 00 00 Jan 26 13:06:42 tuxy kernel: [46339.253659] EIP: [] nfs_fhget+0xd3/0x3e0 [nfs] SS:ESP 0068:cecedb88 -- samba causes nfsv4 kernel module bug https://bugs.launchpad.net/bugs/97105 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From euphaar at gmail.com Sat Jan 26 18:04:51 2008 From: euphaar at gmail.com (Uphaar Agrawalla) Date: Sat, 26 Jan 2008 18:04:51 -0000 Subject: [Bug 67256] Re: Failure to mount root filesystem, cause unknown References: <20061020224046.29371.57259.malonedeb@gandwana.ubuntu.com> Message-ID: <20080126180451.21897.33435.malone@gangotri.ubuntu.com> More information: people have reported it works if "all_generic_ide" is added to the grub boot parameters. This, however, reduces the hard disk performance significantly. Hope that can help troubleshoot. -- Failure to mount root filesystem, cause unknown https://bugs.launchpad.net/bugs/67256 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From javierjc1982 at gmail.com Sat Jan 26 21:58:25 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Sat, 26 Jan 2008 21:58:25 -0000 Subject: [Bug 181388] Re: No WEP wireless connection References: <20080109002232.23964.76848.malonedeb@potassium.ubuntu.com> Message-ID: <20080126215825.29672.77288.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- No WEP wireless connection https://bugs.launchpad.net/bugs/181388 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From javierjc1982 at gmail.com Sat Jan 26 21:59:10 2008 From: javierjc1982 at gmail.com (=?utf-8?q?Javier_Jard=C3=B3n?=) Date: Sat, 26 Jan 2008 21:59:10 -0000 Subject: [Bug 152865] Re: rt61 pcmcia adapter eject causes system lock References: <20071015074920.28140.80809.malonedeb@gangotri.ubuntu.com> Message-ID: <20080126215910.16311.89216.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 ** This bug has been marked a duplicate of bug 134660 Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy -- rt61 pcmcia adapter eject causes system lock https://bugs.launchpad.net/bugs/152865 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From goodmanjpf at yahoo.co.uk Sat Jan 26 23:41:21 2008 From: goodmanjpf at yahoo.co.uk (goodmacman) Date: Sat, 26 Jan 2008 23:41:21 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080126234121.21897.57802.malone@gangotri.ubuntu.com> I have been successfully using one of these cards for a while now and I think the problems which I experience (much like those others experience) seem to perhaps be due to overheating. When the adapter stops working I unplug it and plug it straight back in and most of the time it kicks back into life. Occasionally it has to cool for a bit first. Hope that helps. JG -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From oli.maia at gmail.com Sun Jan 27 00:01:02 2008 From: oli.maia at gmail.com (Olivia) Date: Sun, 27 Jan 2008 00:01:02 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080127000102.29518.42516.malone@potassium.ubuntu.com> goodmacman, I know my problem has nothing to do with heating... It's not really a usb stick, even though it uses the rt73usb driver... Sometimes I've just turned on the computer and the driver dies because I tried to access Google Reader when GReader is in one of those bad server days... -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From mark.cornhill at gmail.com Sun Jan 27 06:56:31 2008 From: mark.cornhill at gmail.com (MarkC) Date: Sun, 27 Jan 2008 06:56:31 -0000 Subject: [Bug 110585] Re: Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx References: <20070427154808.15141.14118.malonedeb@gandwana.ubuntu.com> Message-ID: <20080127065631.21897.26776.malone@gangotri.ubuntu.com> Hi there, This may benefit others who have also had problems installing Ubuntu Server 7.10. I have just managed to install Ubuntu Server 7.10 on my Compaq DL360 G1 by followed Alex Smith's recommendation above using the module blacklist technique. - Boot from the Ubuntu Server 7.10 CD - At the boot menu hit F6 for "Other Options" - When presented with the boot options command line, append Alex's suggested blacklist command sym53c8xx.blacklist=true - Hit enter to boot. I received an eror to say that the boot option was unrecognised however I was able to see my 2 x 36GB SCSI disks (Raid 1) and partition accordingly. Without the blacklist I was unable to see the SCSI disks in the partitioner. Regards Mark -- Compaq Proliant DL360: raid controller should use cpqarray, not sym53c8xx https://bugs.launchpad.net/bugs/110585 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From martin.n.gustafsson at gmail.com Sun Jan 27 09:34:45 2008 From: martin.n.gustafsson at gmail.com (Martin Gustafsson) Date: Sun, 27 Jan 2008 09:34:45 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080127093446.29518.58527.malone@potassium.ubuntu.com> I experienced problems especially when using bittorrent, uploading and downloading a couple of torrents at the same time. The only way to get it working again was to reboot the computer. With 2.6.24-5, the network seems to be more stable. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From steven at nchc.org.tw Sun Jan 27 13:32:00 2008 From: steven at nchc.org.tw (steven_shiau) Date: Sun, 27 Jan 2008 13:32:00 -0000 Subject: [Bug 182765] Re: kernel BUG at /build/buildd/linux-2.6.24/fs/attr.c:138! References: <20080114045447.31560.56820.malonedeb@gangotri.ubuntu.com> Message-ID: <20080127133200.21897.35344.malone@gangotri.ubuntu.com> Looks like this bug still exists in linux-image-2.6.24-5-generic (2.6.24-5.8). -- kernel BUG at /build/buildd/linux-2.6.24/fs/attr.c:138! https://bugs.launchpad.net/bugs/182765 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From patrick.voegeli at gmail.com Sun Jan 27 14:29:57 2008 From: patrick.voegeli at gmail.com (Patrick) Date: Sun, 27 Jan 2008 14:29:57 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080127142957.29672.28949.malone@potassium.ubuntu.com> RT2500 PCI card working fine here! Driver: rt2500pci Kernel: 2.6.22-5-generic I'm using wicd 1.4.1 rather than network-manager. I connect to a WEP secured network with a 64bit Hexa key and get a static IP. No problems! -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From defconoii at gmail.com Sun Jan 27 15:02:39 2008 From: defconoii at gmail.com (Kyle M Weller) Date: Sun, 27 Jan 2008 15:02:39 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> <20080127142957.29672.28949.malone@potassium.ubuntu.com> Message-ID: u should provide a verbose lspci of your card so we know exactly what works and what doesnt -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From patrick.voegeli at gmail.com Sun Jan 27 15:18:36 2008 From: patrick.voegeli at gmail.com (Patrick) Date: Sun, 27 Jan 2008 15:18:36 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080127151836.29518.24128.malone@potassium.ubuntu.com> lspci 00:0b.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01) lsmod | grep rt2 rt2500pci 20352 0 rt2x00pci 11264 1 rt2500pci rt2x00lib 22528 2 rt2500pci,rt2x00pci rfkill 8208 1 rt2x00lib input_polldev 5896 1 rt2x00lib crc_itu_t 3072 1 rt2x00lib mac80211 163480 3 rt2500pci,rt2x00pci,rt2x00lib eeprom_93cx6 3200 1 rt2500pci -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From rowinggolfer at hotmail.com Sun Jan 27 18:02:26 2008 From: rowinggolfer at hotmail.com (Neil Wallace) Date: Sun, 27 Jan 2008 18:02:26 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080127180226.29518.95969.malone@potassium.ubuntu.com> guys, I don't know if this is relevant, but I am sucessfully using rt73usb and rt2500usb modules, and my wireless works dandy (in gutsy). However, I can confirm that it is VITAL that they are loaded in that order. I have an ADVENT 9112 laptop which worked "out-of the-box" with the live CD... but not after the install to hard disk. Comparing the dmesg from the 2 setups, it struck me that those two modules were loaded in a different order. I can now confirm, that for my setup at least, removing these modules then reinstalling in numerical order works (tested 20+times) ie. (as root) rmmod rt2500usb rmmod rt73usb modprobe rt73usb modprobe rt2500usb. Please don't flame me if this is of no use to you, or filed under the incorrect bug. regards. Neil. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From perry.alex at gmail.com Sun Jan 27 18:55:35 2008 From: perry.alex at gmail.com (Alex Perry) Date: Sun, 27 Jan 2008 18:55:35 -0000 Subject: [Bug 35274] Re: NetVista 6824 becomes unresponsive after some time, OK after reboot References: <20060317044901.6510.45231.malonedeb@gangotri.ubuntu.com> Message-ID: <20080127185535.16215.41604.malone@gandwana.ubuntu.com> Just want to add that as of 01/08, this bug is still causing a problem. I'm currently using a Netvista 8303HCU with Gutsy, 2.6.22-14-i386. Adding 'acpi=off noapic' to the grub menu entry resolves the issue. I have added some output lines from my kern.log which may be of some use, and attached is the entire log file. Jan 25 09:55:11 perry kernel: [ 40.706610] ACPI: Interpreter disabled. Jan 25 09:55:11 perry kernel: [ 40.706614] Linux Plug and Play Support v0.97 (c) Adam Belay Jan 25 09:55:11 perry kernel: [ 40.706626] pnp: PnP ACPI: disabled Jan 25 09:55:11 perry kernel: [ 40.706630] PnPBIOS: Scanning system for PnP BIOS support... Jan 25 09:55:11 perry kernel: [ 40.706640] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6290 Jan 25 09:55:11 perry kernel: [ 40.706643] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9f45, dseg 0x400 Jan 25 09:55:11 perry kernel: [ 40.708833] PnPBIOS: 19 nodes reported by PnP BIOS; 19 recorded by driver Jan 25 09:55:11 perry kernel: [ 40.708887] PCI: Probing PCI hardware Jan 25 09:55:11 perry kernel: [ 40.708894] PCI: Probing PCI hardware (bus 00) Jan 25 09:55:11 perry kernel: [ 40.709264] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, Jan 25 09:55:11 perry kernel: [ 40.709266] * this clock source is slow. If you are sure your timer does not have Jan 25 09:55:11 perry kernel: [ 40.709268] * this bug, please use "acpi_pm_good" to disable the workaround Jan 25 09:55:11 perry kernel: [ 40.709310] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO Jan 25 09:55:11 perry kernel: [ 40.709313] PCI quirk: region 1180-11bf claimed by ICH4 GPIO ** Attachment added: "Kernel Log File" http://launchpadlibrarian.net/11587114/kern.log ** Also affects: linux-source-2.6.22 (Ubuntu) Importance: Undecided Status: New -- NetVista 6824 becomes unresponsive after some time, OK after reboot https://bugs.launchpad.net/bugs/35274 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From james.mooney at ncl.ac.uk Sun Jan 27 19:37:02 2008 From: james.mooney at ncl.ac.uk (James Mooney) Date: Sun, 27 Jan 2008 19:37:02 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20080127193702.16311.38097.malone@gandwana.ubuntu.com> My Ubuntu server won't power off after shutdown. I have not managed to resolve the problem, but thought I'd share my notes. My system is a P4 2.0GHz, 256MB RAMBUS RAM. Description of the problem as follows. I try to shut down, and I get all the normal kernel messages. The system eventually halts, and the hard drives spin down, but the motherboard does not power off. If I try to force ACPI the kernel reports "ACPI: Unable to enable ACPI" at start-up. Here are some of the things I've tried, unfortuately without success: I've tried shutting down under Ubuntu Server 6.06.2, 7.04 and 7.10; all exhibit the same problem. I've waited about 5-10 minutes after the "Will now halt" message appears, but the motherboard and fans are still powered up (although the HDDs have switched off). The last kernel message (under 7.10) is "halt: Unable to iterate IDE devices: No such file or directory" I have tried shutdown -h now, shutdown -P now, poweroff, halt. I have modified the kernel command line in /boot/grub/menu.lst. I've tried adding the following combinations: acpi=off noapic noacpi acpi=off apm=on noapic apm=power_off acpi=force lapic noapic reboot=b I've also tried adding acpi=force: I got an error - ACPI: Unable to start ACPI. The following lines copied from /var/log/dmesg may contain clues...? [ 16.118153] ACPI: Core revision 20070126 [ 16.118223] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 16.119618] ACPI: setting ELCR to 0200 (from 0e28) [ 16.605267] ACPI Error (hwacpi-0142): Hardware did not change modes [20070126] [ 16.605275] ACPI Error (evxfevnt-0086): Could not transition to ACPI mode [20070126] [ 16.605281] ACPI Warning (utxface-0139): AcpiEnable failed [20070126] [ 16.605286] ACPI: Unable to enable ACPI I have tried removing my network card (it's the only PCI card I'm using). I've tried removing my graphics card, booting the machine headless. I've tried booting Ubuntu in recovery mode (under 7.10) and shutdown doesn't work in there either. I've checked and there doesn't seem to be anything abnormal about /etc/rc0.d/S90halt. I tried to modprobe apm and it caused the system to hang. The last message output from the kernel is "Bad EIP value." I tried manually stopping samba before trying to shutdown. I also tried unmounting samba shared drives prior to shutdown. I installed the acpi package and ran it. This confirmed that the kernel had not been started with ACPI support. Installing and running acpid confirmed this as it couldn't find the acpi path (acpid: can't open /proc/acpi/event: No such file or directory). I tried to modprobe apm and it caused the system to hang. The kernel generated quite a lot of output but I was unable to log this. The last message output from the kernel is "Bad EIP value." I tried installing apmd: this crashed the system in the same way as starting the apm module... Now here's the interesting thing: With the exact same system I've booted from an Ubuntu Live CD (7.10), and powering off from the desktop works! As does shutting down from the Terminal. Also, I've just installed Debian 4.0r2 server on exactly the same system, and running shutdown -h halts and powers off the system no problem. From this I have ruled out the possibility of hardware trouble, or the need to install a new BIOS. This is as far as I've got. I've stopped short of recompiling the kernel, or installing a different one, although I read in a post somewhere that kernel 2.6.20-16 might work. I have a hunch that the problem may have something to do with interrupt requests, but I don't really know enough about it to investigate. And of course, that could be totally wrong ;) Anyway, if I can provide any more useful information to help resolve this, please let me know. In the mean time, I hope that all of the above is in some way useful ! Cheers :) James -- Power down after shutdown does not work... https://bugs.launchpad.net/bugs/43961 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From james.mooney at ncl.ac.uk Sun Jan 27 19:37:07 2008 From: james.mooney at ncl.ac.uk (James Mooney) Date: Sun, 27 Jan 2008 19:37:07 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20080127193707.1643.7838.malone@gangotri.ubuntu.com> My Ubuntu server won't power off after shutdown. I have not managed to resolve the problem, but thought I'd share my notes. My system is a P4 2.0GHz, 256MB RAMBUS RAM. Description of the problem as follows. I try to shut down, and I get all the normal kernel messages. The system eventually halts, and the hard drives spin down, but the motherboard does not power off. If I try to force ACPI the kernel reports "ACPI: Unable to enable ACPI" at start-up. Here are some of the things I've tried, unfortuately without success: I've tried shutting down under Ubuntu Server 6.06.2, 7.04 and 7.10; all exhibit the same problem. I've waited about 5-10 minutes after the "Will now halt" message appears, but the motherboard and fans are still powered up (although the HDDs have switched off). The last kernel message (under 7.10) is "halt: Unable to iterate IDE devices: No such file or directory" I have tried shutdown -h now, shutdown -P now, poweroff, halt. I have modified the kernel command line in /boot/grub/menu.lst. I've tried adding the following combinations: acpi=off noapic noacpi acpi=off apm=on noapic apm=power_off acpi=force lapic noapic reboot=b I've also tried adding acpi=force: I got an error - ACPI: Unable to start ACPI. The following lines copied from /var/log/dmesg may contain clues...? [ 16.118153] ACPI: Core revision 20070126 [ 16.118223] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 16.119618] ACPI: setting ELCR to 0200 (from 0e28) [ 16.605267] ACPI Error (hwacpi-0142): Hardware did not change modes [20070126] [ 16.605275] ACPI Error (evxfevnt-0086): Could not transition to ACPI mode [20070126] [ 16.605281] ACPI Warning (utxface-0139): AcpiEnable failed [20070126] [ 16.605286] ACPI: Unable to enable ACPI I have tried removing my network card (it's the only PCI card I'm using). I've tried removing my graphics card, booting the machine headless. I've tried booting Ubuntu in recovery mode (under 7.10) and shutdown doesn't work in there either. I've checked and there doesn't seem to be anything abnormal about /etc/rc0.d/S90halt. I tried to modprobe apm and it caused the system to hang. The last message output from the kernel is "Bad EIP value." I tried manually stopping samba before trying to shutdown. I also tried unmounting samba shared drives prior to shutdown. I installed the acpi package and ran it. This confirmed that the kernel had not been started with ACPI support. Installing and running acpid confirmed this as it couldn't find the acpi path (acpid: can't open /proc/acpi/event: No such file or directory). I tried to modprobe apm and it caused the system to hang. The kernel generated quite a lot of output but I was unable to log this. The last message output from the kernel is "Bad EIP value." I tried installing apmd: this crashed the system in the same way as starting the apm module... Now here's the interesting thing: With the exact same system I've booted from an Ubuntu Live CD (7.10), and powering off from the desktop works! As does shutting down from the Terminal. Also, I've just installed Debian 4.0r2 server on exactly the same system, and running shutdown -h halts and powers off the system no problem. From this I have ruled out the possibility of hardware trouble, or the need to install a new BIOS. This is as far as I've got. I've stopped short of recompiling the kernel, or installing a different one, although I read in a post somewhere that kernel 2.6.20-16 might work. I have a hunch that the problem may have something to do with interrupt requests, but I don't really know enough about it to investigate. And of course, that could be totally wrong ;) Anyway, if I can provide any more useful information to help resolve this, please let me know. In the mean time, I hope that all of the above is in some way useful ! Cheers :) James -- Power down after shutdown does not work... https://bugs.launchpad.net/bugs/43961 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From muganor at videotron.ca Sun Jan 27 20:08:20 2008 From: muganor at videotron.ca (Charles Perreault) Date: Sun, 27 Jan 2008 20:08:20 -0000 Subject: [Bug 90283] Re: make-kpkg with ubuntu sources creates gigantic package References: <20070307025345.16907.29057.malonedeb@gandwana.ubuntu.com> Message-ID: <20080127200820.29672.64978.malone@potassium.ubuntu.com> Or course, the problem is neither with kpkg-make, nor with the kernel source you use. It's your kernel config file that has the "Compile the kernel with debug info" option enabled. Disable that option from the config file (edit it or do make menuconfig), clean your source folder, recompile and you'll get a normal size package. There ain't no bug there. Read my previous post and check the link on help.ubuntu.com. Somewhere in the middle of the page it tells you why you get huge packages when compiling with the stock Ubuntu kernel config file. -- make-kpkg with ubuntu sources creates gigantic package https://bugs.launchpad.net/bugs/90283 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for kernel-package in ubuntu. From buzz at piersol.com Mon Jan 28 07:57:40 2008 From: buzz at piersol.com (Buzz) Date: Mon, 28 Jan 2008 07:57:40 -0000 Subject: [Bug 129910] Re: Blank ttys when using vesafb (vga=xxx) References: <20070802103637.2291.40816.malonedeb@gangotri.ubuntu.com> Message-ID: <20080128075740.7455.67722.malone@gangotri.ubuntu.com> I did not realize this was a bug. I always had my virtual consoles at VGA quality, not realizing that higher resolutions were possible, until I experimented with different distros. When I started messing with vga=XXX I got the blank screens. The process below, similar to others, gets 1024x768 in the virtual consoles, though I get the native 1440x900 when running X. edited /etc/initramfs-tools/modules to include: fbcon vesafb commenting in blacklist file, /etc/modprobe.d/blacklist-framebuffer as such: # blacklist vesafb followed by sudo update-initramfs -u -k all -v and then edit /boot/grub/menu.lst, using boot option: vga=0x0318 For the boot option above, I chose the best vga mode from output of "hwinfo --framebuffer" (had to apt-get), which was 1024x768. I've nvidia Geforce 6150 Go, which gives 1440x900 in the GUI, so I will try the nvidia fb modules next. -- Blank ttys when using vesafb (vga=xxx) https://bugs.launchpad.net/bugs/129910 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From repvik at kynisk.com Mon Jan 28 10:07:25 2008 From: repvik at kynisk.com (=?utf-8?q?=C3=98yvind_Repvik?=) Date: Mon, 28 Jan 2008 10:07:25 -0000 Subject: [Bug 186574] [NEW] divide error in 2.6.20-15-server-amd64 References: <20080128100725.16311.64472.malonedeb@gandwana.ubuntu.com> Message-ID: <20080128100725.16311.64472.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-server I am getting a reproducible "divide error" on kernel 2.6.20-15 on feisty. I'm running on an AMD64 x2, 6gb ram. Using LVM2, one striped LV and a few non-striped LVs. If any more info is needed, please ask. [ 39.990455] hub 2-0:1.0: 2 ports detected [ 40.005740] divide error: 0000 [1] SMP [ 40.005838] CPU 0 [ 40.005903] Modules linked in: reiserfs sg ehci_hcd ohci_hcd r8169 ata_generic ahci libata usbcore sd_mod scsi_mod thermal processor fan dm_mod fbcon tileblit font bitblit softcursor vesafb cfbcopyarea cfbimgblt cfbfillrect capability commoncap [ 40.006770] Pid: 2353, comm: lvm Not tainted 2.6.20-16-server #2 [ 40.006807] RIP: 0010:[] [] :dm_mod:stripe_ctr+0xfd/0x2b0 [ 40.006888] RSP: 0018:ffff810198189c48 EFLAGS: 00010246 [ 40.006923] RAX: 0000000001000000 RBX: 0000000000000008 RCX: 0000000000000000 [ 40.006960] RDX: 0000000000000000 RSI: ffff810198189c68 RDI: ffffc20000177163 [ 40.006996] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000008 [ 40.007032] R10: ffffc20000177162 R11: 0000000000000246 R12: ffffc2000017c080 [ 40.007068] R13: ffff810197c4e600 R14: 0000000000000000 R15: 0000000000000000 [ 40.007105] FS: 00002af24bbf36f0(0000) GS:ffffffff80562000(0000) knlGS:0000000000000000 [ 40.007145] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 40.007181] CR2: 00007fff5fcc2ef0 CR3: 00000001977b3000 CR4: 00000000000006e0 [ 40.007217] Process lvm (pid: 2353, threadinfo ffff810198188000, task ffff810198156820) [ 40.007257] Stack: ffff810198189cbc ffffffff880433cb ffff8101993e5a40 ffff8101993e58c0 [ 40.007448] ffffc20000177163 0000000001000000 ffffc2000017c080 ffff810197c4e400 [ 40.007608] 0000000000000000 ffffc20000177150 0000000000000000 ffffffff88043dea [ 40.007735] Call Trace: [ 40.007807] [] :dm_mod:dm_split_args+0x5b/0x180 [ 40.007848] [] :dm_mod:dm_table_add_target+0x19a/0x320 [ 40.007888] [] :dm_mod:table_load+0x118/0x210 [ 40.007928] [] :dm_mod:table_load+0x0/0x210 [ 40.007967] [] :dm_mod:ctl_ioctl+0x253/0x2d0 [ 40.008005] [] make_pages_present+0x90/0xb0 [ 40.008046] [] make_pages_present+0x90/0xb0 [ 40.008084] [] do_ioctl+0x69/0xa0 [ 40.008121] [] vfs_ioctl+0x2a2/0x2e0 [ 40.008158] [] vfs_write+0x155/0x1a0 [ 40.008195] [] sys_ioctl+0x6c/0xb0 [ 40.008232] [] system_call+0x7e/0x83 [ 40.008269] [ 40.008302] [ 40.008303] Code: 48 f7 f1 48 85 d2 48 89 44 24 10 74 16 41 bd ea ff ff ff 49 [ 40.009490] RIP [] :dm_mod:stripe_ctr+0xfd/0x2b0 [ 40.009559] RSP [ 40.009595] <6>ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 40.096231] ohci_hcd 0000:00:13.2: OHCI Host Controller ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- divide error in 2.6.20-15-server-amd64 https://bugs.launchpad.net/bugs/186574 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From pedro.flores.pcdoc at gmail.com Mon Jan 28 12:10:36 2008 From: pedro.flores.pcdoc at gmail.com (Pedro Flores) Date: Mon, 28 Jan 2008 12:10:36 -0000 Subject: [Bug 26075] Re: HP Pavilion dv1000 laptop wireless button will not enable and disable wireless References: <20060113144745.21012.65346.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080128121036.16215.32058.malone@gandwana.ubuntu.com> En mi pavilion dv1000 este led se activa con : % echo 1 > /sys/bus/pci/drivers/ipw2200/0000\:06\:06.0/led Saludos. PF.CHILE -- HP Pavilion dv1000 laptop wireless button will not enable and disable wireless https://bugs.launchpad.net/bugs/26075 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From ktenney at gmail.com Mon Jan 28 16:48:19 2008 From: ktenney at gmail.com (Kent Tenney) Date: Mon, 28 Jan 2008 16:48:19 -0000 Subject: [Bug 23346] Re: Detection of Lacie USB2 harddrive fails References: <20060113142313.21012.12256.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080128164819.16215.67046.malone@gandwana.ubuntu.com> I've found that removing the jumper from the drive (MA, SL, CS) corrects the problem This is confirmed on 3 drives which failed with the jumper in any position, and succeeded with the jumper removed. Thanks, Kent -- Detection of Lacie USB2 harddrive fails https://bugs.launchpad.net/bugs/23346 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From web.jdm at gmail.com Mon Jan 28 20:02:45 2008 From: web.jdm at gmail.com (web.jdm) Date: Mon, 28 Jan 2008 20:02:45 -0000 Subject: [Bug 182792] Re: [Hardy] System freeze when I modprobe ndiswrapper References: <20080114095042.31560.30011.malonedeb@gangotri.ubuntu.com> Message-ID: <20080128200245.16311.63292.launchpad@gandwana.ubuntu.com> ** Changed in: ndiswrapper (Ubuntu) Status: Confirmed => Fix Committed -- [Hardy] System freeze when I modprobe ndiswrapper https://bugs.launchpad.net/bugs/182792 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for ndiswrapper in ubuntu. From th.orlowski at gmx.net Mon Jan 28 21:04:00 2008 From: th.orlowski at gmx.net (Thomas Orlowski) Date: Mon, 28 Jan 2008 21:04:00 -0000 Subject: [Bug 129910] Re: Blank ttys when using vesafb (vga=xxx) References: <20070802103637.2291.40816.malonedeb@gangotri.ubuntu.com> Message-ID: <20080128210400.29518.62295.malone@potassium.ubuntu.com> Hallo, I tried the workaround for this bug too, but always ended with a console screen containing some spread green squares, partly blinking. I have an older Toshiba notebook with a NVidia GeForce4 620Go. Because I need the Xinerama function (for beamer presentations), I use the restricted nvidia driver. I never got a working high resolution framebuffer console (with vesafb -- I know that only this works with the nvidia drivers) since I upgraded from Feisty (where everything worked fine) to Gutsy (which is IMHO on older hardware _very_ slow, even when I disable most of the eyecandy). I was just one step before switching back to Debian (that I used before Feisty) the necessary backup was already done. Then I found, that the framebuffer console came back, when I disabled the Ubuntu splash screen. So the combination of the splash screen with the restricted nvidia driver (#9636, not the "new" one) seems to break the vesafb framebuffer. Thomas. -- Blank ttys when using vesafb (vga=xxx) https://bugs.launchpad.net/bugs/129910 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From steve.langasek at canonical.com Mon Jan 28 21:54:38 2008 From: steve.langasek at canonical.com (Steve Langasek) Date: Mon, 28 Jan 2008 21:54:38 -0000 Subject: [Bug 78741] Re: menu.lst was changed during Ubuntu upgrade References: <20070110232000.14769.96454.malonedeb@gandwana.ubuntu.com> Message-ID: <20080128215438.16311.93672.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 21412 *** https://bugs.launchpad.net/bugs/21412 ** This bug is no longer a duplicate of bug 75712 Kernel update hoses hand-edited menu.lst ** This bug has been marked a duplicate of bug 21412 Default update-grub behaviour is not intuitive with respect to user modifications -- menu.lst was changed during Ubuntu upgrade https://bugs.launchpad.net/bugs/78741 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber (via bug 21412). From guillaumeavril at gmail.com Mon Jan 28 21:54:39 2008 From: guillaumeavril at gmail.com (Guillaume AVRIL) Date: Mon, 28 Jan 2008 21:54:39 -0000 Subject: [Bug 61235] Re: USB mass storage stops working after a while References: <20060919095715.28762.79398.malonedeb@gandwana.ubuntu.com> Message-ID: <20080128215440.7455.70412.malone@gangotri.ubuntu.com> sudo modprobe -r ehci_hcd also worked for me, I am using ubuntu 7.10 with a Asus M2V motherboard. My dmesg gives: [ 5638.148000] usb 5-1: new high speed USB device using ehci_hcd and address 2 [ 5643.148000] ehci_hcd 0000:00:10.4: Unlink after no-IRQ? Controller is probably using the wrong IRQ. [ 5653.692000] usb 5-1: device not accepting address 2, error -110 [ 5653.804000] usb 5-1: new high speed USB device using ehci_hcd and address 3 [ 5669.348000] usb 5-1: device not accepting address 3, error -110 [ 5669.460000] usb 5-1: new high speed USB device using ehci_hcd and address 4 [ 5679.884000] usb 5-1: device not accepting address 4, error -110 [ 5679.996000] usb 5-1: new high speed USB device using ehci_hcd and address 5 [ 5690.420000] usb 5-1: device not accepting address 5, error -110 [ 5711.732000] usb 5-1: new high speed USB device using ehci_hcd and address 6 I am using the usual 2.6.22-14-generic #1 SMP linux kernel provided with Ubuntu 7.10. Good luck with this bug! -- USB mass storage stops working after a while https://bugs.launchpad.net/bugs/61235 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From steve.langasek at canonical.com Mon Jan 28 21:52:40 2008 From: steve.langasek at canonical.com (Steve Langasek) Date: Mon, 28 Jan 2008 21:52:40 -0000 Subject: [Bug 23248] Re: Upgrade makes custom options dissapear from grubs menu.lst References: <20060113142242.21012.9084.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080128215240.29518.72009.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 21412 *** https://bugs.launchpad.net/bugs/21412 ** This bug is no longer a duplicate of bug 21412 Default update-grub behaviour is not intuitive with respect to user modifications ** This bug has been marked a duplicate of bug 75712 Kernel update hoses hand-edited menu.lst ** This bug is no longer a duplicate of bug 75712 Kernel update hoses hand-edited menu.lst ** This bug has been marked a duplicate of bug 21412 Default update-grub behaviour is not intuitive with respect to user modifications -- Upgrade makes custom options dissapear from grubs menu.lst https://bugs.launchpad.net/bugs/23248 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From steve.langasek at canonical.com Mon Jan 28 21:55:31 2008 From: steve.langasek at canonical.com (Steve Langasek) Date: Mon, 28 Jan 2008 21:55:31 -0000 Subject: [Bug 156092] Re: grub is overwritten so that Windows does not appear on boot list References: <20071023050954.24713.30259.malonedeb@gangotri.ubuntu.com> Message-ID: <20080128215531.29518.79882.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 21412 *** https://bugs.launchpad.net/bugs/21412 ** This bug is no longer a duplicate of bug 75712 Kernel update hoses hand-edited menu.lst ** This bug has been marked a duplicate of bug 21412 Default update-grub behaviour is not intuitive with respect to user modifications -- grub is overwritten so that Windows does not appear on boot list https://bugs.launchpad.net/bugs/156092 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber (via bug 21412). From steve.langasek at canonical.com Mon Jan 28 21:55:44 2008 From: steve.langasek at canonical.com (Steve Langasek) Date: Mon, 28 Jan 2008 21:55:44 -0000 Subject: [Bug 75712] Re: Kernel update hoses hand-edited menu.lst References: <20061214071302.2116.64445.malonedeb@gangotri.ubuntu.com> Message-ID: <20080128215544.7601.59756.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 21412 *** https://bugs.launchpad.net/bugs/21412 ** This bug has been marked a duplicate of bug 21412 Default update-grub behaviour is not intuitive with respect to user modifications -- Kernel update hoses hand-edited menu.lst https://bugs.launchpad.net/bugs/75712 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber (via bug 21412). From steve.langasek at canonical.com Mon Jan 28 21:56:25 2008 From: steve.langasek at canonical.com (Steve Langasek) Date: Mon, 28 Jan 2008 21:56:25 -0000 Subject: [Bug 21412] Re: Default update-grub behaviour is not intuitive with respect to user modifications References: <20060113141241.21012.46008.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080128215626.29672.14964.malone@potassium.ubuntu.com> This bug has been fixed in hardy, in grub version 0.97-29ubuntu7 and above: grub (0.97-29ubuntu7) hardy; urgency=low * debian/update-grub: use ucf to record changes to the autogenerated kernel list It is still advisable that boot options for other operating systems such as Windows be added outside the "automagic kernels list" markers, but going forward users will receive a debconf warning from update-grub if the update will overwrite local changes. ** Changed in: grub (Ubuntu Hardy) Importance: Medium => High Status: Confirmed => Fix Released -- Default update-grub behaviour is not intuitive with respect to user modifications https://bugs.launchpad.net/bugs/21412 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From mdz at ubuntu.com Mon Jan 28 22:07:50 2008 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 28 Jan 2008 22:07:50 -0000 Subject: [Bug 21412] Re: Default update-grub behaviour is not intuitive with respect to user modifications References: <20060113141241.21012.46008.launchpad@macquarie.warthogs.hbd.com> <20080128215626.29672.14964.malone@potassium.ubuntu.com> Message-ID: <20080128220750.GA31661@perseus> On Mon, Jan 28, 2008 at 09:56:25PM -0000, Steve Langasek wrote: > This bug has been fixed in hardy, in grub version 0.97-29ubuntu7 and > above: > > grub (0.97-29ubuntu7) hardy; urgency=low > > * debian/update-grub: use ucf to record changes to the autogenerated > kernel list > > It is still advisable that boot options for other operating systems such > as Windows be added outside the "automagic kernels list" markers, but > going forward users will receive a debconf warning from update-grub if > the update will overwrite local changes. This is certainly an improvement, but it seems to always trigger on the first upgrade to 0.97-29ubuntu7 or later, even if the file hasn't been modified. Is it possible to fix that, so that it's silent unless the user actually modifies the file? -- - mdz -- Default update-grub behaviour is not intuitive with respect to user modifications https://bugs.launchpad.net/bugs/21412 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From steve.langasek at canonical.com Mon Jan 28 22:15:02 2008 From: steve.langasek at canonical.com (Steve Langasek) Date: Mon, 28 Jan 2008 22:15:02 -0000 Subject: [Bug 178120] Re: After each ubunu ugrade which requires restart, Windows Boot option is removed from Menu.lst References: <20071222171147.9473.16541.malonedeb@potassium.ubuntu.com> Message-ID: <20080128221502.16311.45260.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 21412 *** https://bugs.launchpad.net/bugs/21412 ** This bug has been marked a duplicate of bug 21412 Default update-grub behaviour is not intuitive with respect to user modifications -- After each ubunu ugrade which requires restart, Windows Boot option is removed from Menu.lst https://bugs.launchpad.net/bugs/178120 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber (via bug 21412). From voltagex at gmail.com Mon Jan 28 22:17:48 2008 From: voltagex at gmail.com (Adam) Date: Mon, 28 Jan 2008 22:17:48 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> <20080127180226.29518.95969.malone@potassium.ubuntu.com> Message-ID: <8f1cf64b0801281417s72094f10o825bdf40c7c5a529@mail.gmail.com> Do you have two wireless cards installed? If not you should not be using two modules. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From steve.langasek at canonical.com Mon Jan 28 22:58:50 2008 From: steve.langasek at canonical.com (Steve Langasek) Date: Mon, 28 Jan 2008 22:58:50 -0000 Subject: [Bug 117955] Re: Failed to boot after kernel update References: <20070531130550.20177.37159.malonedeb@potassium.ubuntu.com> Message-ID: <20080128225852.16311.35355.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 21412 *** https://bugs.launchpad.net/bugs/21412 ** This bug has been marked a duplicate of bug 21412 Default update-grub behaviour is not intuitive with respect to user modifications -- Failed to boot after kernel update https://bugs.launchpad.net/bugs/117955 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber (via bug 21412). From steve.langasek at canonical.com Mon Jan 28 23:15:12 2008 From: steve.langasek at canonical.com (Steve Langasek) Date: Mon, 28 Jan 2008 23:15:12 -0000 Subject: [Bug 53519] Re: After kernel update, system cannot boot because menu.lst hacked badly. References: <20060720130917.32401.15176.malonedeb@gandwana.ubuntu.com> Message-ID: <20080128231512.29518.61848.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 21412 *** https://bugs.launchpad.net/bugs/21412 ** This bug has been marked a duplicate of bug 21412 Default update-grub behaviour is not intuitive with respect to user modifications -- After kernel update, system cannot boot because menu.lst hacked badly. https://bugs.launchpad.net/bugs/53519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber (via bug 21412). From steve.langasek at canonical.com Mon Jan 28 23:20:50 2008 From: steve.langasek at canonical.com (Steve Langasek) Date: Mon, 28 Jan 2008 23:20:50 -0000 Subject: [Bug 2646] Re: Grub upgrade erases Windows boot option References: <20050928131404.26698.87717.malonedeb@gangotri.ubuntu.com> Message-ID: <20080128232052.29672.3400.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 21412 *** https://bugs.launchpad.net/bugs/21412 ** Changed in: grub Status: New => Invalid ** This bug has been marked a duplicate of bug 21412 Default update-grub behaviour is not intuitive with respect to user modifications -- Grub upgrade erases Windows boot option https://bugs.launchpad.net/bugs/2646 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber (via bug 21412). From rowinggolfer at hotmail.com Mon Jan 28 23:47:00 2008 From: rowinggolfer at hotmail.com (Neil Wallace) Date: Mon, 28 Jan 2008 23:47:00 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080128234700.29672.33938.malone@potassium.ubuntu.com> thanks. I've blacklisted the rt2500 one... and all works fine. Neil. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From steve.langasek at canonical.com Tue Jan 29 00:07:01 2008 From: steve.langasek at canonical.com (Steve Langasek) Date: Tue, 29 Jan 2008 00:07:01 -0000 Subject: [Bug 21412] Re: Default update-grub behaviour is not intuitive with respect to user modifications References: <20060113141241.21012.46008.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080129000701.29672.58981.malone@potassium.ubuntu.com> Matt, In my pre-upload tests, I did not find that the first upgrade to 0.97-29ubuntu7 triggered a ucf prompt except in the case where there was already a detectable difference between the magic comments and the kernel list. This is AFAICS a necessary evil in order to get the current state of the config file registered with ucf; waiting until the first kernel upgrade only increases the chances of a ucf prompt that might have oterwise been avoided, but it should not result in any prompts where the menu.lst has not been locally modified. Can you provide a copy of a menu.lst that results in a prompt when you think it shouldn't? -- Default update-grub behaviour is not intuitive with respect to user modifications https://bugs.launchpad.net/bugs/21412 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From brian at ubuntu.com Tue Jan 29 01:57:26 2008 From: brian at ubuntu.com (Brian Murray) Date: Tue, 29 Jan 2008 01:57:26 -0000 Subject: [Bug 80613] Re: Ubuntu install CD does not boot correctly on HP dc7700p References: <20070119154414.5640.79217.malonedeb@gandwana.ubuntu.com> Message-ID: <20080129015726.29518.12785.malone@potassium.ubuntu.com> We are closing this bug report as it lacks the information, described in the previous comments, we need to investigate the problem further. However, please reopen it if you can give us the missing information and feel free to submit bug reports in the future. ** Changed in: linux-source-2.6.22 (Ubuntu) Status: Incomplete => Invalid -- Ubuntu install CD does not boot correctly on HP dc7700p https://bugs.launchpad.net/bugs/80613 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From mdz at ubuntu.com Tue Jan 29 09:36:12 2008 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 29 Jan 2008 09:36:12 -0000 Subject: [Bug 21412] Re: Default update-grub behaviour is not intuitive with respect to user modifications References: <20060113141241.21012.46008.launchpad@macquarie.warthogs.hbd.com> <20080129000701.29672.58981.malone@potassium.ubuntu.com> Message-ID: <20080129093612.GC7406@alcor.net> On Tue, Jan 29, 2008 at 12:07:01AM -0000, Steve Langasek wrote: > In my pre-upload tests, I did not find that the first upgrade to > 0.97-29ubuntu7 triggered a ucf prompt except in the case where there was > already a detectable difference between the magic comments and the > kernel list. This is AFAICS a necessary evil in order to get the > current state of the config file registered with ucf; waiting until the > first kernel upgrade only increases the chances of a ucf prompt that > might have oterwise been avoided, but it should not result in any > prompts where the menu.lst has not been locally modified. Can you > provide a copy of a menu.lst that results in a prompt when you think it > shouldn't? Attached are /boot/grub/menu.lst and /boot/grub/menu.lst~. Assuming this is the backup from ucf, this should be what you need. Notice that all of the "kernel" lines are unmodified. I saw exactly the same behaviour on both my desktop and my laptop upon upgrading to this version of grub. The laptop was a fresh 7.10 install upgraded to Hardy, with very little customization. -- - mdz # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 3 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) hiddenmenu # Pretty colours #color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro ## Setup crashdump menu entries ## e.g. crashdump=1 # crashdump=0 ## default grub root device ## e.g. groot=(hd0,0) # groot=(hd0,0) ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions=quiet splash ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Ubuntu hardy (development branch), kernel 2.6.24-5-generic Default root (hd0,0) kernel /boot/vmlinuz root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash initrd /boot/initrd.img quiet title Ubuntu hardy (development branch), kernel 2.6.24-5-generic Default (recovery mode) root (hd0,0) kernel /boot/vmlinuz root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single initrd /boot/initrd.img title Ubuntu hardy (development branch), kernel 2.6.24-4-generic Previous root (hd0,0) kernel /boot/vmlinuz.old root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash initrd /boot/initrd.img.old quiet title Ubuntu hardy (development branch), kernel 2.6.24-4-generic Previous (recovery mode) root (hd0,0) kernel /boot/vmlinuz.old root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single initrd /boot/initrd.img.old title Ubuntu hardy (development branch), kernel 2.6.24-5-generic root (hd0,0) kernel /boot/vmlinuz-2.6.24-5-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash initrd /boot/initrd.img-2.6.24-5-generic quiet title Ubuntu hardy (development branch), kernel 2.6.24-5-generic (recovery mode) root (hd0,0) kernel /boot/vmlinuz-2.6.24-5-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single initrd /boot/initrd.img-2.6.24-5-generic title Ubuntu hardy (development branch), kernel 2.6.24-4-generic root (hd0,0) kernel /boot/vmlinuz-2.6.24-4-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash initrd /boot/initrd.img-2.6.24-4-generic quiet title Ubuntu hardy (development branch), kernel 2.6.24-4-generic (recovery mode) root (hd0,0) kernel /boot/vmlinuz-2.6.24-4-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single initrd /boot/initrd.img-2.6.24-4-generic title Ubuntu hardy (development branch), kernel 2.6.24-3-generic root (hd0,0) kernel /boot/vmlinuz-2.6.24-3-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash initrd /boot/initrd.img-2.6.24-3-generic quiet title Ubuntu hardy (development branch), kernel 2.6.24-3-generic (recovery mode) root (hd0,0) kernel /boot/vmlinuz-2.6.24-3-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single initrd /boot/initrd.img-2.6.24-3-generic title Ubuntu hardy (development branch), kernel 2.6.24-2-generic root (hd0,0) kernel /boot/vmlinuz-2.6.24-2-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash initrd /boot/initrd.img-2.6.24-2-generic quiet title Ubuntu hardy (development branch), kernel 2.6.24-2-generic (recovery mode) root (hd0,0) kernel /boot/vmlinuz-2.6.24-2-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single initrd /boot/initrd.img-2.6.24-2-generic title Ubuntu hardy (development branch), memtest86+ root (hd0,0) kernel /boot/memtest86+.bin quiet ### END DEBIAN AUTOMAGIC KERNELS LIST # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 3 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) hiddenmenu # Pretty colours #color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro ## Setup crashdump menu entries ## e.g. crashdump=1 # crashdump=0 ## default grub root device ## e.g. groot=(hd0,0) # groot=(hd0,0) ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions=quiet splash ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Ubuntu hardy (development branch), kernel 2.6.24-4-generic Default root (hd0,0) kernel /boot/vmlinuz root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash initrd /boot/initrd.img quiet title Ubuntu hardy (development branch), kernel 2.6.24-4-generic Default (recovery mode) root (hd0,0) kernel /boot/vmlinuz root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single initrd /boot/initrd.img title Ubuntu hardy (development branch), kernel 2.6.24-3-generic Previous root (hd0,0) kernel /boot/vmlinuz.old root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash initrd /boot/initrd.img.old quiet title Ubuntu hardy (development branch), kernel 2.6.24-3-generic Previous (recovery mode) root (hd0,0) kernel /boot/vmlinuz.old root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single initrd /boot/initrd.img.old title Ubuntu hardy (development branch), kernel 2.6.24-4-generic root (hd0,0) kernel /boot/vmlinuz-2.6.24-4-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash initrd /boot/initrd.img-2.6.24-4-generic quiet title Ubuntu hardy (development branch), kernel 2.6.24-4-generic (recovery mode) root (hd0,0) kernel /boot/vmlinuz-2.6.24-4-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single initrd /boot/initrd.img-2.6.24-4-generic title Ubuntu hardy (development branch), kernel 2.6.24-3-generic root (hd0,0) kernel /boot/vmlinuz-2.6.24-3-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash initrd /boot/initrd.img-2.6.24-3-generic quiet title Ubuntu hardy (development branch), kernel 2.6.24-3-generic (recovery mode) root (hd0,0) kernel /boot/vmlinuz-2.6.24-3-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single initrd /boot/initrd.img-2.6.24-3-generic title Ubuntu hardy (development branch), kernel 2.6.24-2-generic root (hd0,0) kernel /boot/vmlinuz-2.6.24-2-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro quiet splash initrd /boot/initrd.img-2.6.24-2-generic quiet title Ubuntu hardy (development branch), kernel 2.6.24-2-generic (recovery mode) root (hd0,0) kernel /boot/vmlinuz-2.6.24-2-generic root=UUID=daf1bf61-d974-4e90-b2c7-5f4dfa4e56cf ro single initrd /boot/initrd.img-2.6.24-2-generic title Ubuntu hardy (development branch), memtest86+ root (hd0,0) kernel /boot/memtest86+.bin quiet ### END DEBIAN AUTOMAGIC KERNELS LIST -- Default update-grub behaviour is not intuitive with respect to user modifications https://bugs.launchpad.net/bugs/21412 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From viking at f2s.com Tue Jan 29 12:04:32 2008 From: viking at f2s.com (viking777) Date: Tue, 29 Jan 2008 12:04:32 -0000 Subject: [Bug 186124] Re: Blank screen with lates restricted-modules update References: <20080126103022.16311.87474.malonedeb@gandwana.ubuntu.com> Message-ID: <20080129120433.23009.99811.malone@gandwana.ubuntu.com> This problem has been cured by using the latest proprietary ati driver installer (version 8.452) followed by aticonfig. -- Blank screen with lates restricted-modules update https://bugs.launchpad.net/bugs/186124 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From brian at ubuntu.com Tue Jan 29 17:54:55 2008 From: brian at ubuntu.com (Brian Murray) Date: Tue, 29 Jan 2008 17:54:55 -0000 Subject: [Bug 38031] Re: ps/2 mouse not recognized on IBM X21 laptop References: <20060404142029.25515.90492.malonedeb@gangotri.ubuntu.com> Message-ID: <20080129175456.7455.91601.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Incomplete => Invalid -- ps/2 mouse not recognized on IBM X21 laptop https://bugs.launchpad.net/bugs/38031 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From tmartsum at gmail.com Tue Jan 29 20:58:35 2008 From: tmartsum at gmail.com (=?utf-8?q?Thorbj=C3=B8rnTux?=) Date: Tue, 29 Jan 2008 20:58:35 -0000 Subject: [Bug 17763] Re: Random Freezes References: <20060113135310.21012.13904.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080129205835.23105.64712.malone@gandwana.ubuntu.com> I still have this problem in Kubuntu 7.10. However I noticed that it mostly happens when minimizeing or closing a full-screen window. -- Random Freezes https://bugs.launchpad.net/bugs/17763 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From steve.langasek at canonical.com Tue Jan 29 21:43:28 2008 From: steve.langasek at canonical.com (Steve Langasek) Date: Tue, 29 Jan 2008 21:43:28 -0000 Subject: [Bug 181183] Re: Please create -rt metapackages needed for alpha 3 of UbuntuStudio. References: <20080108073942.15627.53847.malonedeb@gangotri.ubuntu.com> Message-ID: <20080129214329.29672.10053.malone@potassium.ubuntu.com> linux-image-rt and linux-rt are present in hardy, with linux-meta version 2.6.24.5.6. ** Changed in: linux-meta (Ubuntu) Status: Fix Committed => Fix Released -- Please create -rt metapackages needed for alpha 3 of UbuntuStudio. https://bugs.launchpad.net/bugs/181183 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From jamie at ubuntu.com Tue Jan 29 22:02:31 2008 From: jamie at ubuntu.com (Jamie Strandboge) Date: Tue, 29 Jan 2008 22:02:31 -0000 Subject: [Bug 182257] Re: metapackage linux-image-k7 does not depend on latest kernel References: <20080112113008.13962.99547.malonedeb@gangotri.ubuntu.com> Message-ID: <20080129220231.23105.42082.malone@gandwana.ubuntu.com> Thanks for taking the time to report this bug and helping to make Ubuntu better. We appreciate the difficulties you are facing, but this appears to be a "regular" (non-security) bug. I have unmarked it as a security issue since this bug does not show evidence of allowing attackers to cross privilege boundaries nor directly cause loss of data/privacy. Please feel free to report any other bugs you may find. ** This bug is no longer flagged as a security issue -- metapackage linux-image-k7 does not depend on latest kernel https://bugs.launchpad.net/bugs/182257 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From jamie at ubuntu.com Tue Jan 29 22:21:50 2008 From: jamie at ubuntu.com (Jamie Strandboge) Date: Tue, 29 Jan 2008 22:21:50 -0000 Subject: [Bug 183161] Re: Copying a file through iscsi OCFS2 filesystem crashed the system References: <20080115123301.12618.56650.malonedeb@potassium.ubuntu.com> Message-ID: <20080129222150.29518.3363.launchpad@potassium.ubuntu.com> ** Visibility changed to: Public -- Copying a file through iscsi OCFS2 filesystem crashed the system https://bugs.launchpad.net/bugs/183161 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From mail at michaelbrunner.de Tue Jan 29 22:43:52 2008 From: mail at michaelbrunner.de (Brunni) Date: Tue, 29 Jan 2008 22:43:52 -0000 Subject: [Bug 187179] [NEW] Ubuntu Server enable PAE without checking for support References: <20080129224352.7455.77069.malonedeb@gangotri.ubuntu.com> Message-ID: <20080129224352.7455.77069.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-generic The Ubuntu Server wants to enable PAE while booting. But e.g. VirtualBox does not support PAE, so it does not load. I could not even install edubuntu server, because it hangs when "installing linux-generic". See also: http://www.virtualbox.org/wiki/Guest_OSes ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- Ubuntu Server enable PAE without checking for support https://bugs.launchpad.net/bugs/187179 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From brian at ubuntu.com Wed Jan 30 01:11:41 2008 From: brian at ubuntu.com (Brian Murray) Date: Wed, 30 Jan 2008 01:11:41 -0000 Subject: [Bug 187179] Re: Ubuntu Server enable PAE without checking for support References: <20080129224352.7455.77069.malonedeb@gangotri.ubuntu.com> Message-ID: <20080130011141.12730.82063.malone@gandwana.ubuntu.com> Thank you for taking the time to report this bug and helping to make Ubuntu better. Which release of Ubuntu Server were you trying to install? Thanks in advance. ** Changed in: linux-meta (Ubuntu) Status: New => Incomplete -- Ubuntu Server enable PAE without checking for support https://bugs.launchpad.net/bugs/187179 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From 144745 at bugs.launchpad.net Wed Jan 30 03:35:59 2008 From: 144745 at bugs.launchpad.net (Launchpad Bug Tracker) Date: Wed, 30 Jan 2008 03:35:59 -0000 Subject: [Bug 144745] [NEW] Webcam detected, but not working - Bad module References: <20070925120333.27871.23490.malonedeb@gandwana.ubuntu.com> Message-ID: <20080130033559.5342.48888.launchpad@canonical@potassium.ubuntu.com> You have been subscribed to a public bug: My webcam is detected by the system and can be found by the v4l2 driver in ekiga (i.e. it works in ekiga). But when I open Cheese, it prompts "Unable to find a webcam, SORRY!". This is a Thinkpad T43 266871U. The system is Ubuntu Gusty, kernel: 2.6.22-12-generic. ### lsusb ### Bus 005 Device 002: ID 050d:0218 Belkin Components Bus 005 Device 004: ID 046d:c016 Logitech, Inc. M-UV69a Optical Wheel Mouse Bus 005 Device 005: ID 0d49:3200 Maxtor Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 003: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Bus 003 Device 001: ID 0000:0000 Bus 002 Device 007: ID 0ac8:301b Z-Star Microelectronics Corp. ZC0301 WebCam Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 ### dmesg ### [ 2502.084000] usb 2-2: new full speed USB device using uhci_hcd and address 7 [ 2502.280000] usb 2-2: configuration #1 chosen from 1 choice [ 2502.448000] Linux video capture interface: v2.00 [ 2502.488000] zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.07 [ 2502.488000] usb 2-2: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x301B) [ 2502.564000] usb 2-2: PB-0330 image sensor detected [ 2502.976000] usb 2-2: Initialization succeeded [ 2502.976000] usb 2-2: V4L2 device registered as /dev/video0 [ 2502.976000] usbcore: registered new interface driver zc0301 [ 2502.992000] usbcore: registered new interface driver gspca [ 2502.992000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered ### Output when running Cheese ### ** Message: Probing the webcam, please ignore the following, not applicabable tries ** Message: Error running pipeline 'v4l2src ! fakesink': Could not negotiate format [gstbasesrc.c(2062): gst_base_src_start (): /pipeline0/v4l2src0: Check your filtered caps, if any] ** Message: test pipeline for v4l2src failed: [v4l2src ! fakesink]: Could not negotiate format ** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=640,height=480 ! fakesink': Could not get/set settings from/on resource. [v4l_calls.c(89): gst_v4l_get_capabilities (): /pipeline1/v4lsrc0: error getting capabilities Invalid argument of from device /dev/video0] ** Message: test pipeline for v4lsrc failed: [v4lsrc ! video/x-raw-rgb,width=640,height=480 ! fakesink]: Could not get/set settings from/on resource. ** Message: Error running pipeline 'v4lsrc ! video/x-raw-yuv,width=640,height=480 ! fakesink': Could not get/set settings from/on resource. [v4l_calls.c(89): gst_v4l_get_capabilities (): /pipeline2/v4lsrc1: error getting capabilities Invalid argument of from device /dev/video0] ** Message: test pipeline for v4lsrc failed: [v4lsrc ! video/x-raw-yuv,width=640,height=480 ! fakesink]: Could not get/set settings from/on resource. ** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=320,height=240 ! fakesink': Could not get/set settings from/on resource. [v4l_calls.c(89): gst_v4l_get_capabilities (): /pipeline3/v4lsrc2: error getting capabilities Invalid argument of from device /dev/video0] ** Message: test pipeline for v4lsrc failed: [v4lsrc ! video/x-raw-rgb,width=320,height=240 ! fakesink]: Could not get/set settings from/on resource. ** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=1280,height=960 ! fakesink': Could not get/set settings from/on resource. [v4l_calls.c(89): gst_v4l_get_capabilities (): /pipeline4/v4lsrc3: error getting capabilities Invalid argument of from device /dev/video0] ** Message: test pipeline for v4lsrc failed: [v4lsrc ! video/x-raw-rgb,width=1280,height=960 ! fakesink]: Could not get/set settings from/on resource. ** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=174,height=144 ! fakesink': Could not get/set settings from/on resource. [v4l_calls.c(89): gst_v4l_get_capabilities (): /pipeline5/v4lsrc4: error getting capabilities Invalid argument of from device /dev/video0] ** Message: test pipeline for v4lsrc failed: [v4lsrc ! video/x-raw-rgb,width=174,height=144 ! fakesink]: Could not get/set settings from/on resource. ** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=160,height=120 ! fakesink': Could not get/set settings from/on resource. [v4l_calls.c(89): gst_v4l_get_capabilities (): /pipeline6/v4lsrc5: error getting capabilities Invalid argument of from device /dev/video0] ** Message: test pipeline for v4lsrc failed: [v4lsrc ! video/x-raw-rgb,width=160,height=120 ! fakesink]: Could not get/set settings from/on resource. ** Message: Error running pipeline 'v4lsrc ! fakesink': Could not get/set settings from/on resource. [v4l_calls.c(89): gst_v4l_get_capabilities (): /pipeline7/v4lsrc6: error getting capabilities Invalid argument of from device /dev/video0] ** Message: test pipeline for v4lsrc failed: [v4lsrc ! fakesink]: Could not get/set settings from/on resource. using source: videotestsrc ** Affects: wengophone Importance: Undecided Status: Invalid ** Affects: linux (Ubuntu) Importance: Undecided Assignee: Kernel Bugs (kernel-bugs) Status: Confirmed ** Affects: udev (Ubuntu) Importance: Undecided Status: New -- Webcam detected, but not working - Bad module https://bugs.edge.launchpad.net/bugs/144745 You received this bug notification because you are a member of Kernel Bugs, which is a bug assignee. From marceloatie at gmail.com Wed Jan 30 03:35:58 2008 From: marceloatie at gmail.com (Marcelo Atie) Date: Wed, 30 Jan 2008 03:35:58 -0000 Subject: [Bug 144745] Re: Webcam detected, but not working - Bad module References: <20070925120333.27871.23490.malonedeb@gandwana.ubuntu.com> Message-ID: <20080130033559.5342.71750.launchpad@potassium.ubuntu.com> ** Changed in: linux (Ubuntu) Assignee: (unassigned) => Kernel Bugs (kernel-bugs) -- Webcam detected, but not working - Bad module https://bugs.launchpad.net/bugs/144745 You received this bug notification because you are a member of Kernel Bugs, which is a bug assignee. From marceloatie at gmail.com Wed Jan 30 03:43:15 2008 From: marceloatie at gmail.com (Marcelo Atie) Date: Wed, 30 Jan 2008 03:43:15 -0000 Subject: [Bug 144745] Re: Webcam detected, but not working - Bad module References: <20070925120333.27871.23490.malonedeb@gandwana.ubuntu.com> Message-ID: <20080130034315.5342.6313.launchpad@potassium.ubuntu.com> ** Description changed: My webcam is detected by the system and can be found by the v4l2 driver in ekiga (i.e. it works in ekiga). But when I open Cheese, it prompts "Unable to find a webcam, SORRY!". This is a Thinkpad T43 266871U. The system is Ubuntu Gusty, kernel: 2.6.22-12-generic. + + Steps to solve this problem: + sudo apt-get install gspca-source + sudo m-a prepare + sudo m-a a-i gspca + and ever run left each reboot: + sudo rmmod zc0301 + sudo rmmod gspca + sudo modprobe gspca + ### lsusb ### Bus 005 Device 002: ID 050d:0218 Belkin Components Bus 005 Device 004: ID 046d:c016 Logitech, Inc. M-UV69a Optical Wheel Mouse Bus 005 Device 005: ID 0d49:3200 Maxtor Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 003: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Bus 003 Device 001: ID 0000:0000 Bus 002 Device 007: ID 0ac8:301b Z-Star Microelectronics Corp. ZC0301 WebCam Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 ### dmesg ### [ 2502.084000] usb 2-2: new full speed USB device using uhci_hcd and address 7 [ 2502.280000] usb 2-2: configuration #1 chosen from 1 choice [ 2502.448000] Linux video capture interface: v2.00 [ 2502.488000] zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.07 [ 2502.488000] usb 2-2: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x301B) [ 2502.564000] usb 2-2: PB-0330 image sensor detected [ 2502.976000] usb 2-2: Initialization succeeded [ 2502.976000] usb 2-2: V4L2 device registered as /dev/video0 [ 2502.976000] usbcore: registered new interface driver zc0301 [ 2502.992000] usbcore: registered new interface driver gspca [ 2502.992000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered ### Output when running Cheese ### ** Message: Probing the webcam, please ignore the following, not applicabable tries ** Message: Error running pipeline 'v4l2src ! fakesink': Could not negotiate format [gstbasesrc.c(2062): gst_base_src_start (): /pipeline0/v4l2src0: Check your filtered caps, if any] ** Message: test pipeline for v4l2src failed: [v4l2src ! fakesink]: Could not negotiate format ** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=640,height=480 ! fakesink': Could not get/set settings from/on resource. [v4l_calls.c(89): gst_v4l_get_capabilities (): /pipeline1/v4lsrc0: error getting capabilities Invalid argument of from device /dev/video0] ** Message: test pipeline for v4lsrc failed: [v4lsrc ! video/x-raw-rgb,width=640,height=480 ! fakesink]: Could not get/set settings from/on resource. ** Message: Error running pipeline 'v4lsrc ! video/x-raw-yuv,width=640,height=480 ! fakesink': Could not get/set settings from/on resource. [v4l_calls.c(89): gst_v4l_get_capabilities (): /pipeline2/v4lsrc1: error getting capabilities Invalid argument of from device /dev/video0] ** Message: test pipeline for v4lsrc failed: [v4lsrc ! video/x-raw-yuv,width=640,height=480 ! fakesink]: Could not get/set settings from/on resource. ** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=320,height=240 ! fakesink': Could not get/set settings from/on resource. [v4l_calls.c(89): gst_v4l_get_capabilities (): /pipeline3/v4lsrc2: error getting capabilities Invalid argument of from device /dev/video0] ** Message: test pipeline for v4lsrc failed: [v4lsrc ! video/x-raw-rgb,width=320,height=240 ! fakesink]: Could not get/set settings from/on resource. ** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=1280,height=960 ! fakesink': Could not get/set settings from/on resource. [v4l_calls.c(89): gst_v4l_get_capabilities (): /pipeline4/v4lsrc3: error getting capabilities Invalid argument of from device /dev/video0] ** Message: test pipeline for v4lsrc failed: [v4lsrc ! video/x-raw-rgb,width=1280,height=960 ! fakesink]: Could not get/set settings from/on resource. ** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=174,height=144 ! fakesink': Could not get/set settings from/on resource. [v4l_calls.c(89): gst_v4l_get_capabilities (): /pipeline5/v4lsrc4: error getting capabilities Invalid argument of from device /dev/video0] ** Message: test pipeline for v4lsrc failed: [v4lsrc ! video/x-raw-rgb,width=174,height=144 ! fakesink]: Could not get/set settings from/on resource. ** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=160,height=120 ! fakesink': Could not get/set settings from/on resource. [v4l_calls.c(89): gst_v4l_get_capabilities (): /pipeline6/v4lsrc5: error getting capabilities Invalid argument of from device /dev/video0] ** Message: test pipeline for v4lsrc failed: [v4lsrc ! video/x-raw-rgb,width=160,height=120 ! fakesink]: Could not get/set settings from/on resource. ** Message: Error running pipeline 'v4lsrc ! fakesink': Could not get/set settings from/on resource. [v4l_calls.c(89): gst_v4l_get_capabilities (): /pipeline7/v4lsrc6: error getting capabilities Invalid argument of from device /dev/video0] ** Message: test pipeline for v4lsrc failed: [v4lsrc ! fakesink]: Could not get/set settings from/on resource. using source: videotestsrc -- Webcam detected, but not working - Bad module https://bugs.launchpad.net/bugs/144745 You received this bug notification because you are a member of Kernel Bugs, which is a bug assignee. From mt at mtconsult.at Wed Jan 30 08:59:44 2008 From: mt at mtconsult.at (Mario Taschwer) Date: Wed, 30 Jan 2008 08:59:44 -0000 Subject: [Bug 187260] [NEW] libncurses.so.5 is missing from initrd.img-2.6.15-51-server References: <20080130085944.21500.28959.malonedeb@gangotri.ubuntu.com> Message-ID: <20080130085944.21500.28959.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-51-server cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=6.06 DISTRIB_CODENAME=dapper DISTRIB_DESCRIPTION="Ubuntu 6.06.2 LTS" When booting the kernel and initrd from the linux-image-2.6.15-51-server package, a run-time linker error occurs for vgchange as libncurses.so.5 cannot be found within initrd. Thus, booting will fail if the root file system resides on an LVM volume. In fact, libncurses.so.5 is missing from the /lib directory within initrd.img-2.6.15-51-server. I verified that libncurses.so.5 exists within initrd.img-2.6.15-29-server. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: New -- libncurses.so.5 is missing from initrd.img-2.6.15-51-server https://bugs.launchpad.net/bugs/187260 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu. From primes2h at gmail.com Wed Jan 30 09:05:01 2008 From: primes2h at gmail.com (Sergio Zanchetta) Date: Wed, 30 Jan 2008 09:05:01 -0000 Subject: [Bug 187262] [NEW] Please add Dell driver for Conexant HSF modem in Hardy References: <20080130090502.5652.56101.malonedeb@potassium.ubuntu.com> Message-ID: <20080130090502.5652.56101.malonedeb@potassium.ubuntu.com> Public bug reported: Binary package hint: linux-restricted-modules I have a Compaq Presario 2125EA with a Conexant HSF modem. Ubuntu Gutsy. I tried this driver from dell (.deb) http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R155004&SystemID=INSPIRONI6400/E1505&servicetag=&os=UBLN&osl=en&deviceid=8593&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=1&libid=20&fileid=206745 in order to use my internal winmodem and it works. After rebooting I found it in use in restricted manager. That driver is for 7.04 but during installation it builds appropriate module for kernel in use. It's very nice driver. Since it works out of the box for several card ID (thus several PC and laptop), it would be useful if it was in restricted modules, and integrated in restricted manager in HARDY. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New ** Summary changed: - Add Dell driver for Conexant HSF modem in Hardy + Please add Dell driver for Conexant HSF modem in Hardy -- Please add Dell driver for Conexant HSF modem in Hardy https://bugs.launchpad.net/bugs/187262 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From bugtracker at slideomania.com Wed Jan 30 10:08:44 2008 From: bugtracker at slideomania.com (hk47) Date: Wed, 30 Jan 2008 10:08:44 -0000 Subject: [Bug 187275] [NEW] [linux-source] several local vulnerabilities References: <20080130100844.5807.45148.malonedeb@potassium.ubuntu.com> Message-ID: <20080130100844.5807.45148.malonedeb@potassium.ubuntu.com> Public bug reported: Binary package hint: linux-source References: DSA-1479-1 (http://www.debian.org/security/2008/dsa-1479) Quoting: "Several local vulnerabilities have been discovered in the Linux kernel that may lead to a denial of service or the execution of arbitrary code. The Common Vulnerabilities and Exposures project identifies the following problems: [...] CVE-2007-4571 Takashi Iwai supplied a fix for a memory leak in the snd_page_alloc module. Local users could exploit this issue to obtain sensitive information from the kernel. CVE-2007-6151 ADLAB discovered a possible memory overrun in the ISDN subsystem that may permit a local user to overwrite kernel memory leading by issuing ioctls with unterminated data. CVE-2008-0001 Bill Roman of Datalight noticed a coding error in the linux VFS subsystem that, under certain conditions, can allow local users to remove directories for which they should not have removal privileges." ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New ** Visibility changed to: Public ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2007-4571 ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2007-6151 ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2008-0001 -- [linux-source] several local vulnerabilities https://bugs.launchpad.net/bugs/187275 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From bugwatch at bugs.launchpad.net Wed Jan 30 10:18:28 2008 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 30 Jan 2008 10:18:28 -0000 Subject: [Bug 38805] Re: parallel port printing is garbled when using ECP References: <20060409010425.24516.88371.malonedeb@gangotri.ubuntu.com> Message-ID: <20080130103538.13759.46241.launchpad@forster.canonical.com> ** Changed in: debian Status: New => Fix Committed -- parallel port printing is garbled when using ECP https://bugs.launchpad.net/bugs/38805 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From agostino.russo at gmail.com Wed Jan 30 11:01:03 2008 From: agostino.russo at gmail.com (Agostino Russo) Date: Wed, 30 Jan 2008 11:01:03 -0000 Subject: [Bug 187282] Re: update-initramfs -u fails with "WARNING: /boot is ro mounted." even if /boot is rw References: <20080130104725.5652.25055.malonedeb@potassium.ubuntu.com> Message-ID: <20080130110103.21404.11406.launchpad@gangotri.ubuntu.com> ** Also affects: initramfs-tools (Ubuntu) Importance: Undecided Status: New ** Description changed: That is due to the check for /boot ro status, since they look for the substring "ro" within /proc/mounts options column, which is also - triggered by "group_id". + triggered by "group_id" (among others). ro_boot_check() { [ -r /proc/mounts ] || return 0 boot_opts=$(awk '/boot/{if (match($4, /ro/) && $2 == "/boot") print "ro"}' /proc/mounts) .... workaround: update-initramfs -c -k $(uname -r) -- update-initramfs -u fails with "WARNING: /boot is ro mounted." even if /boot is rw https://bugs.launchpad.net/bugs/187282 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From cjwatson at canonical.com Wed Jan 30 11:07:50 2008 From: cjwatson at canonical.com (Colin Watson) Date: Wed, 30 Jan 2008 11:07:50 -0000 Subject: [Bug 187282] Re: update-initramfs -u fails with "WARNING: /boot is ro mounted." even if /boot is rw References: <20080130104725.5652.25055.malonedeb@potassium.ubuntu.com> Message-ID: <20080130110750.18690.21538.launchpad@gandwana.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Importance: Undecided => Medium Status: New => Confirmed Target: None => hardy-alpha-5 -- update-initramfs -u fails with "WARNING: /boot is ro mounted." even if /boot is rw https://bugs.launchpad.net/bugs/187282 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From marco.rotella at gmail.com Wed Jan 30 11:52:31 2008 From: marco.rotella at gmail.com (Marco.rotella) Date: Wed, 30 Jan 2008 11:52:31 -0000 Subject: [Bug 181255] Re: [hardy] iwl3945 wireless LED is never on References: <20080108143243.7349.16584.malonedeb@gangotri.ubuntu.com> Message-ID: <20080130115231.5807.3096.malone@potassium.ubuntu.com> In my notebook doesn't work! It's an Acer 5920G. -- [hardy] iwl3945 wireless LED is never on https://bugs.launchpad.net/bugs/181255 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From 187282 at bugs.launchpad.net Wed Jan 30 15:45:05 2008 From: 187282 at bugs.launchpad.net (Launchpad Bug Tracker) Date: Wed, 30 Jan 2008 15:45:05 -0000 Subject: [Bug 187282] Re: update-initramfs -u fails with "WARNING: /boot is ro mounted." even if /boot is rw References: <20080130104725.5652.25055.malonedeb@potassium.ubuntu.com> Message-ID: <20080130154522.15058.51525.malone@drescher.canonical.com> This bug was fixed in the package initramfs-tools - 0.85eubuntu23 --------------- initramfs-tools (0.85eubuntu23) hardy; urgency=low * Fix broken test in ro_boot_check (LP: #187282). It was matching ro as a subword. -- Evan Dandrea Wed, 30 Jan 2008 10:35:28 -0500 ** Changed in: initramfs-tools (Ubuntu) Status: Confirmed => Fix Released -- update-initramfs -u fails with "WARNING: /boot is ro mounted." even if /boot is rw https://bugs.launchpad.net/bugs/187282 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From bice77 at malmo2.net Wed Jan 30 16:37:37 2008 From: bice77 at malmo2.net (=?utf-8?q?Vincent_L=C3=B6nngren?=) Date: Wed, 30 Jan 2008 16:37:37 -0000 Subject: [Bug 187344] [NEW] AE_NOT_FOUND, Inactive valid threshold References: <20080130163739.21500.15858.malonedeb@gangotri.ubuntu.com> Message-ID: <20080130163739.21500.15858.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-generic DISTRIB_ID=Ubuntu DISTRIB_RELEASE=7.10 DISTRIB_CODENAME=gutsy DISTRIB_DESCRIPTION="Ubuntu 7.10" linux-image-generic 2.6.22.14.21 In /var/log/syslog, these keep showing up: Jan 30 16:41:08 ubuntu kernel: [ 53.466418] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 Jan 30 16:42:03 ubuntu kernel: [ 95.575937] ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold [0] [20070126] Jan 30 16:45:58 ubuntu kernel: [ 183.414231] ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold [0] [20070126] Jan 30 16:46:03 ubuntu kernel: [ 184.750553] ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold [0] [20070126] Jan 30 16:47:28 ubuntu kernel: [ 204.310947] ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold [0] [20070126] Jan 30 17:46:18 ubuntu kernel: [ 947.803086] ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold [0] [20070126] Jan 30 18:12:23 ubuntu kernel: [ 1399.986123] ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold [0] [20070126] Jan 30 18:12:28 ubuntu kernel: [ 1402.170902] ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold [0] [20070126] Jan 30 18:14:38 ubuntu kernel: [ 1463.359348] ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold [0] [20070126] Jan 30 18:14:43 ubuntu kernel: [ 1465.447750] ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold [0] [20070126] I'm thinking to myself that this can't be good, and I can't find any bug report or explanation for it. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- AE_NOT_FOUND, Inactive valid threshold https://bugs.launchpad.net/bugs/187344 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From agostino.russo at gmail.com Wed Jan 30 16:41:22 2008 From: agostino.russo at gmail.com (Agostino Russo) Date: Wed, 30 Jan 2008 16:41:22 -0000 Subject: [Bug 187282] Re: update-initramfs -u fails with "WARNING: /boot is ro mounted." even if /boot is rw References: <20080130104725.5652.25055.malonedeb@potassium.ubuntu.com> Message-ID: <20080130164122.12634.30615.launchpad@gandwana.ubuntu.com> ** Changed in: wubi Status: Confirmed => Fix Released -- update-initramfs -u fails with "WARNING: /boot is ro mounted." even if /boot is rw https://bugs.launchpad.net/bugs/187282 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From bice77 at malmo2.net Wed Jan 30 17:03:40 2008 From: bice77 at malmo2.net (=?utf-8?q?Vincent_L=C3=B6nngren?=) Date: Wed, 30 Jan 2008 17:03:40 -0000 Subject: [Bug 187344] Re: AE_NOT_FOUND, Invalid active threshold References: <20080130163739.21500.15858.malonedeb@gangotri.ubuntu.com> Message-ID: <20080130170340.5807.25195.launchpad@potassium.ubuntu.com> ** Summary changed: - AE_NOT_FOUND, Inactive valid threshold + AE_NOT_FOUND, Invalid active threshold -- AE_NOT_FOUND, Invalid active threshold https://bugs.launchpad.net/bugs/187344 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From janl at langfeldt.net Wed Jan 30 19:30:30 2008 From: janl at langfeldt.net (janl) Date: Wed, 30 Jan 2008 19:30:30 -0000 Subject: [Bug 40942] Re: Default settings runs CPU at full speed always References: <20060423152952.4110.99593.malonedeb@gangotri.ubuntu.com> Message-ID: <20080130193030.12730.42205.malone@gandwana.ubuntu.com> Not the same bug, the characterization is different. This one is also fixed. -- Default settings runs CPU at full speed always https://bugs.launchpad.net/bugs/40942 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From albertomilone at alice.it Wed Jan 30 21:41:26 2008 From: albertomilone at alice.it (Alberto Milone) Date: Wed, 30 Jan 2008 21:41:26 -0000 Subject: [Bug 172295] Re: Intel Corporation PRO/100 VE connects to the Internet only at times References: <20071127113422.30939.10572.malonedeb@gandwana.ubuntu.com> Message-ID: <20080130214126.5807.2764.malone@potassium.ubuntu.com> Here is the output of ifconfig when the network doesn't work: :~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:16:36:CA:DB:80 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:309 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2856 (2.7 KB) TX bytes:36500 (35.6 KB) eth0:avah Link encap:Ethernet HWaddr 00:16:36:CA:DB:80 inet addr:169.254.8.205 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:60 errors:0 dropped:0 overruns:0 frame:0 TX packets:60 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5550 (5.4 KB) TX bytes:5550 (5.4 KB) Here's the output of ifconfig when the connection works: :~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:16:36:CA:DB:80 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::216:36ff:feca:db80/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:338 errors:0 dropped:0 overruns:0 frame:0 TX packets:572 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:157546 (153.8 KB) TX bytes:74519 (72.7 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:65 errors:0 dropped:0 overruns:0 frame:0 TX packets:65 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5990 (5.8 KB) TX bytes:5990 (5.8 KB) Any ideas? ** Also affects: network-manager Importance: Undecided Status: New -- Intel Corporation PRO/100 VE connects to the Internet only at times https://bugs.launchpad.net/bugs/172295 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From kwoo at andrew.cmu.edu Wed Jan 30 21:56:38 2008 From: kwoo at andrew.cmu.edu (KWoo) Date: Wed, 30 Jan 2008 21:56:38 -0000 Subject: [Bug 37382] Re: ata timeout freezes system partly References: <20060330194042.5441.60313.malonedeb@gangotri.ubuntu.com> Message-ID: <20080130215638.5652.19209.malone@potassium.ubuntu.com> Had a similar problem. Have a PATA cdrom drive and a SATA hard drive on a ICHM6 chipset. According to the libata FAQ, Intel chipsets like this combine the PATA and SATA functions and the IDE and libata drivers fight. Fixed it by adding "combined_mode=libata" to the kernel parameters in GRUB. Has booted multiple times without this problem now. Got the information from: http://linux-ata.org/faq.html#combined -- ata timeout freezes system partly https://bugs.launchpad.net/bugs/37382 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From stefan.bader at canonical.com Wed Jan 30 23:10:00 2008 From: stefan.bader at canonical.com (Stefan Bader) Date: Wed, 30 Jan 2008 23:10:00 -0000 Subject: [Bug 159241] Re: [Tracking Bug] PCI resource allocation warnings References: <20071101112827.29323.75367.malonedeb@gangotri.ubuntu.com> Message-ID: <20080130231000.5652.44668.malone@potassium.ubuntu.com> For now I committed a patch that lowers the visibility of that message as well. This doesn't help the problem behind that. The BIOS still messes something up. But this seems to be often the case without problems in Linux. Long term there should be a way to make users aware of those issues without being overly annoying or alarming. ** Changed in: linux (Ubuntu Hardy) Status: Confirmed => Fix Committed -- [Tracking Bug] PCI resource allocation warnings https://bugs.launchpad.net/bugs/159241 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From leann at ubuntu.com Thu Jan 31 01:38:23 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Thu, 31 Jan 2008 01:38:23 -0000 Subject: [Bug 12519] Re: Removing modular bay drive causes system freeze References: <20060113132602.21012.1106.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20080131013825.14721.18593.launchpad@gangotri.ubuntu.com> ** Changed in: linux (Ubuntu) Importance: Undecided => Medium Assignee: (unassigned) => Ubuntu Kernel Team (ubuntu-kernel-team) Status: Incomplete => Triaged -- Removing modular bay drive causes system freeze https://bugs.launchpad.net/bugs/12519 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From leann at ubuntu.com Thu Jan 31 01:58:06 2008 From: leann at ubuntu.com (Leann Ogasawara) Date: Thu, 31 Jan 2008 01:58:06 -0000 Subject: [Bug 88530] Re: USB ports: connect-debounce failed, port disabled References: <20070227225858.22094.98179.malonedeb@gandwana.ubuntu.com> Message-ID: <20080131015808.3205.71153.launchpad@gandwana.ubuntu.com> ** Changed in: linux (Ubuntu) Assignee: (unassigned) => Ubuntu Kernel Team (ubuntu-kernel-team) Status: Incomplete => Triaged -- USB ports: connect-debounce failed, port disabled https://bugs.launchpad.net/bugs/88530 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From dvord at hotmail.com Thu Jan 31 04:52:24 2008 From: dvord at hotmail.com (Dvord Direwood) Date: Thu, 31 Jan 2008 04:52:24 -0000 Subject: [Bug 96084] Re: boot - /bin/sh: can't access tty; job control turned off References: <20070325201937.23891.35895.malonedeb@gangotri.ubuntu.com> Message-ID: <20080131045225.31477.87160.malone@potassium.ubuntu.com> I had the same problem installing Ubuntu 7.10. Adding irqpoll to the startup in GRUB as recommended above does allow me to proceed to install and use Ubuntu 7.10 -- boot - /bin/sh: can't access tty; job control turned off https://bugs.launchpad.net/bugs/96084 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for initramfs-tools in ubuntu. From frcz at hotmail.com Thu Jan 31 07:46:22 2008 From: frcz at hotmail.com (=?utf-8?q?Fernando_Ch=C3=A1vez?=) Date: Thu, 31 Jan 2008 07:46:22 -0000 Subject: [Bug 34902] Re: Ralink Wireless legacy drivers (rt2500 rt61 rt73 rt2570) USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20080131074623.14859.5901.malone@gangotri.ubuntu.com> Hola, FINALLY... this applies to RT73 based dongles or similar (my case: TP-LINK TL_WN321g) Thanks to all of you, after months of trial and error, and so many pages read: This is based on: http://generacionlibre.es/?p=11#comments who based on: http://terminusblog.wordpress.com/2007/08/04/instalacion-de-dispositivo-wifi-linksys-wusb54gc-en-ubuntu-feisty/ So this goes in English and adapted, sort of a HOWTO: 1) Install: sudo apt-get install build-essential linux-headers-`uname -r` 2)Download: sudo wget http://rt2×00.serialmonkey.com/rt73-cvs-daily.tar.gz 3) Unpack the previous tar.gz ("home" would be perfect) 3) Change to the following directory: cd /rt73-cvs-yyyymmddhh/Module (based on where you unpacked it) 4) Make: sudo make Just ignore the message: !!! WARNING: Module file much too big (>1MB) !!! Check your kernel settings or use ’strip’ 5) sudo strip -S rt73.ko 6) sudo make install 7) Get rid off network manager: sudo aptitude purge network-manager 8) May or may not be necessary, to ease things?????? sudo apt-get install rutilt 9) Turn off the wlan0 for a while: sudo ifconfig wlan0 down 10) Remove the following troublemakers: sudo modprobe -r rt73usb sudo modprobe -r rt2570 sudo modprobe -r rt2500usb sudo modprobe -r rt2×00lib 11) Blacklist the above, this is a must, as pointed out by some of you, open an editor: sudo gedit /etc/modprobe.d/blacklist 12) Add to the end of the file: # Blacklist rt73usb, as it is a non-functional beta module which conflicts with the working rt73 module. blacklist rt73usb # Blacklist rt2570, as it causes conflicts with rt73 blacklist rt2570 # Other modules that break rt73 blacklist rt2500usb blacklist rt2×00lib 13) Load the module: sudo modprobe -v rt73 14) Now you can play with RutilIT, click on menu: Applications/Internet/RutilIT... or 15) Even better open interfaces: sudo gedit /etc/network/interfaces 16)Add the following lines (for auto DHCP) according to your personal set-ups, but make sure to block (mask using #) all other references to eth0 or similar, if not this WON'T work: #auto eth0 #iface eth0 inet dhcp auto wlan0 iface wlan0 inet dhcp pre-up ifconfig wlan0 up pre-up iwconfig wlan0 essid YOUR_SSID pre-up iwconfig wlan0 mode managed pre-up iwpriv wlan0 set AuthMode=WPAPSK pre-up iwpriv wlan0 set EncrypType=TKIP pre-up iwpriv wlan0 set WPAPSK=YOUR_PASS_KEY_IN_HEXADEC Or (for manual DHCP) #auto eth0 #iface eth0 inet dhcp auto wlan0 iface wlan0 inet static address 192.168.1.2 (or what ever yours is) netmask 255.255.255.0 (or what .....) gateway 192.168.1.1 (or what .....) pre-up ifconfig wlan0 up pre-up iwconfig wlan0 essid YOUR_SSID pre-up iwconfig wlan0 mode managed pre-up iwpriv wlan0 set AuthMode=WPAPSK pre-up iwpriv wlan0 set EncrypType=TKIP pre-up iwpriv wlan0 set WPAPSK=YOUR_PASS_KEY_IN_HEXADEC 17) Save the file, 18) Reboot and you should be connected Hasta pronto, let me know, Fernando -- Ralink Wireless legacy drivers (rt2500 rt61 rt73 rt2570) USB/PCMCIA/PCI hangs PC https://bugs.launchpad.net/bugs/34902 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From frcz at hotmail.com Thu Jan 31 08:14:11 2008 From: frcz at hotmail.com (=?utf-8?q?Fernando_Ch=C3=A1vez?=) Date: Thu, 31 Jan 2008 08:14:11 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080131081411.3301.60389.malone@gandwana.ubuntu.com> Hi, Read my comment on: https://bugs.launchpad.net/ubuntu/+source/linux-ubuntu-modules-2.6.22/+bug/34902 Fernandoc -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From frcz at hotmail.com Thu Jan 31 08:15:44 2008 From: frcz at hotmail.com (=?utf-8?q?Fernando_Ch=C3=A1vez?=) Date: Thu, 31 Jan 2008 08:15:44 -0000 Subject: [Bug 144161] Re: Wi-Fi rt73 USB (TP-Link TL-WN321G) doesn't connect References: <20070923021649.6684.9936.malonedeb@potassium.ubuntu.com> Message-ID: <20080131081544.3301.283.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 134660 *** https://bugs.launchpad.net/bugs/134660 Since I started this... Read my post on: https://bugs.launchpad.net/ubuntu/+source/linux-ubuntu-modules-2.6.22/+bug/34902 This is solved for me now... Bye Fernando -- Wi-Fi rt73 USB (TP-Link TL-WN321G) doesn't connect https://bugs.launchpad.net/bugs/144161 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug (via bug 134660). From hermann at blaxhall.com Thu Jan 31 09:42:24 2008 From: hermann at blaxhall.com (_oOMOo_) Date: Thu, 31 Jan 2008 09:42:24 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> Message-ID: <20080131094224.31477.41259.malone@potassium.ubuntu.com> Fernando that looks suspiciously similar to the howto on the ubuntu forums (http://ubuntuforums.org/showthread.php?t=400236) apologies if I'm wrong. Compiling one of the legacy drivers does work for some people in Gutsy, me included, but not as yet in Hardy as far as I know. I never had to comment out my other interfaces in /etc/network/interfaces either.. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From uncommonnonsense at gmail.com Thu Jan 31 11:32:30 2008 From: uncommonnonsense at gmail.com (NoWhereMan) Date: Thu, 31 Jan 2008 11:32:30 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> <20080131094224.31477.41259.malone@potassium.ubuntu.com> Message-ID: On Jan 31, 2008 10:42 AM, _oOMOo_ wrote: > Compiling one of the legacy drivers does work for some people > in Gutsy, me included, but not as yet in Hardy as far as I know. By the way using the legacy driver *is not* a solution -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From oli.maia at gmail.com Thu Jan 31 12:04:15 2008 From: oli.maia at gmail.com (Olivia) Date: Thu, 31 Jan 2008 12:04:15 -0000 Subject: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy References: <20070825072450.30530.28766.malonedeb@gandwana.ubuntu.com> <20080131094224.31477.41259.malone@potassium.ubuntu.com> Message-ID: I don't know I, but I couldn't compile the driver using that Howto. Or maybe I did compile it, only it didn't really work. Which is why I'm stuck waiting for a solution for dummies :D -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Kernel Bugs, which is a subscriber of a duplicate bug. From admarginem at gmail.com Thu Jan 31 12:32:20 2008 From: admarginem at gmail.com (admarginem) Date: Thu, 31 Jan 2008 12:32:20 -0000 Subject: [Bug 28464] Re: Include OSS driver for Ralink wireless chipset? References: <20060113174232.6087.20307.malonedeb@gangotri.ubuntu.com> Message-ID: <20080131123221.31477.67008.malone@potassium.ubuntu.com> Leann, you are wrong - the current hardy does not include rt61.ko driver. It includes unoperational rt61pci... ** Changed in: linux-source-2.6.22 (Ubuntu) Status: Fix Released => Confirmed -- Include OSS driver for Ralink wireless chipset? https://bugs.launchpad.net/bugs/28464 You received this bug notification because you are a member of Kernel Bugs, which is a direct subscriber. From stephan.klein at gmx.at Thu Jan 31 12:59:43 2008 From: stephan.klein at gmx.at (Stephan Klein) Date: Thu, 31 Jan 2008 12:59:43 -0000 Subject: [Bug 182676] Re: Dell Optiplex 755: "PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0" and some more... References: <20080113200945.24811.61740.malonedeb@gandwana.ubuntu.com> Message-ID: <20080131125943.3205.18682.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 159241 *** https://bugs.launchpad.net/bugs/159241 ** This bug has been marked a duplicate of bug 159241 [Tracking Bug] PCI resource allocation warnings -- Dell Optiplex 755: "PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0" and some more... https://bugs.launchpad.net/bugs/182676 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu (via bug 159241). From stephan.klein at gmx.at Thu Jan 31 12:59:29 2008 From: stephan.klein at gmx.at (Stephan Klein) Date: Thu, 31 Jan 2008 12:59:29 -0000 Subject: [Bug 182180] Re: kernel: [ 7.982162] PCI: Cannot allocate resource region 4 of device 0000:00:1d.0 References: <20080112015031.14066.2293.malonedeb@gangotri.ubuntu.com> Message-ID: <20080131125929.31377.96111.launchpad@potassium.ubuntu.com> *** This bug is a duplicate of bug 159241 *** https://bugs.launchpad.net/bugs/159241 ** This bug has been marked a duplicate of bug 159241 [Tracking Bug] PCI resource allocation warnings -- kernel: [ 7.982162] PCI: Cannot allocate resource region 4 of device 0000:00:1d.0 https://bugs.launchpad.net/bugs/182180 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu (via bug 159241). From stephan.klein at gmx.at Thu Jan 31 12:58:10 2008 From: stephan.klein at gmx.at (Stephan Klein) Date: Thu, 31 Jan 2008 12:58:10 -0000 Subject: [Bug 159915] Re: PCI cannot allocate resource for region 7 8 and 9 on Acer Aspire 1640Z Laptop References: <20071104092035.1137.10353.malonedeb@potassium.ubuntu.com> Message-ID: <20080131125810.3301.27397.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 159241 *** https://bugs.launchpad.net/bugs/159241 ** This bug has been marked a duplicate of bug 159241 [Tracking Bug] PCI resource allocation warnings -- PCI cannot allocate resource for region 7 8 and 9 on Acer Aspire 1640Z Laptop https://bugs.launchpad.net/bugs/159915 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu (via bug 159241). From stephan.klein at gmx.at Thu Jan 31 12:59:55 2008 From: stephan.klein at gmx.at (Stephan Klein) Date: Thu, 31 Jan 2008 12:59:55 -0000 Subject: [Bug 72476] Re: PCI Allocation Errors with ATI Radeon Xpress 200M References: <20061119202713.25975.4610.malonedeb@gandwana.ubuntu.com> Message-ID: <20080131125955.3301.95577.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 159241 *** https://bugs.launchpad.net/bugs/159241 ** This bug has been marked a duplicate of bug 159241 [Tracking Bug] PCI resource allocation warnings -- PCI Allocation Errors with ATI Radeon Xpress 200M https://bugs.launchpad.net/bugs/72476 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu (via bug 159241). From mikko.rantalainen at peda.net Thu Jan 31 17:37:39 2008 From: mikko.rantalainen at peda.net (Mikko Rantalainen) Date: Thu, 31 Jan 2008 17:37:39 -0000 Subject: [Bug 187761] [NEW] Need a way to disable selected modules with a kernel flag References: <20080131173739.3301.1001.malonedeb@gandwana.ubuntu.com> Message-ID: <20080131173739.3301.1001.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image Bug #90271 and bug #187671 describe situations where Live CDs and install CDs fail to work because a broken kernel module causes a hang before user has a say. The error may be in an optional kernel module (such as sound card driver or memory card reader) but the end user has no way to prevent kernel from loading a possibly known broken module. Vanilla kernels from kernel.org support flag disablemodules (e.g. disablemodules=8139too,sdhci prevents linux kernel from loading 8139too.ko or sdhci.ko) but such flag does not seem to work with Ubuntu. This is a feature request to enable such a flag. It is not needed for normal use but in case of rare hardware exposing a bug in a kernel module not having such a flag prevents one from booting Ubuntu. (I'd prefer booting without network adapter or memory card reader to not booting at all). This issue also causes slowdowns such as bug #187671 which cannot proceed until bug #90271 is fixed because testing possible fixes for the bug is really hard until the other kernel module has been fixed. (This is because both bugs affect the same laptop hardware and both kernel modules cause a kernel hang.) I'd consider disablemodules flag similar to acpi flag - it should not be needed but still we need it. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New ** Summary changed: - Need a way to disable modules with kernel flag + Need a way to disable selected modules with a kernel flag -- Need a way to disable selected modules with a kernel flag https://bugs.launchpad.net/bugs/187761 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu. From brian at ubuntu.com Thu Jan 31 23:41:58 2008 From: brian at ubuntu.com (Brian Murray) Date: Thu, 31 Jan 2008 23:41:58 -0000 Subject: [Bug 183174] Re: Tickless idle not working on AMD Turion 64 X2 (inspiron laptop) References: <20080115130751.30605.85385.malonedeb@gandwana.ubuntu.com> Message-ID: <20080131234158.31377.56003.launchpad@potassium.ubuntu.com> ** Changed in: linux (Ubuntu) Sourcepackagename: linux-source-2.6.24 => linux -- Tickless idle not working on AMD Turion 64 X2 (inspiron laptop) https://bugs.launchpad.net/bugs/183174 You received this bug notification because you are a member of Kernel Bugs, which is a bug contact for linux-meta in ubuntu.