[Bug 221613] Re: NFSroot broken on hardy
James Lamb
admin at oranged.to
Thu Aug 7 15:08:51 UTC 2008
As soon as I set the IP address manually in the boot syntax It goes
straight past the section where the system hung previously. Here is an
updated bootlog.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-16-server (buildd at palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:58:00 UTC 2008 (Ubuntu 2.6.24-16.30-server)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable)
[ 0.000000] BIOS-e820: 000000000009a000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffcbac0 (usable)
[ 0.000000] BIOS-e820: 00000000bffcbac0 - 00000000bffcee00 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffcee00 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] 4224MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 0009a540
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 1310720
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 1310720
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FDFD0 checksum 0
[ 0.000000] ACPI: RSDP 000FDFD0, 0024 (r2 IBM )
[ 0.000000] ACPI: XSDT BFFCED00, 004C (r1 IBM SERDEFNT 1000 IBM 45444F43)
[ 0.000000] ACPI: FACP BFFCEC40, 0084 (r2 IBM SERDEFNT 1000 IBM 45444F43)
[ 0.000000] ACPI: DSDT BFFCBAC0, 26CF (r2 IBM SERDEFNT 1000 INTL 20041203)
[ 0.000000] ACPI: FACS BFFCEA00, 0040
[ 0.000000] ACPI: APIC BFFCEBC0, 0068 (r1 IBM SERDEFNT 1000 IBM 45444F43)
[ 0.000000] ACPI: SRAT BFFCEAC0, 00C8 (r1 IBM SERDEFNT 1000 IBM 45444F43)
[ 0.000000] ACPI: HPET BFFCEA80, 0038 (r1 IBM SERDEFNT 1000 IBM 45444F43)
[ 0.000000] ACPI: MCFG BFFCEA40, 003C (r1 IBM SERDEFNT 1000 IBM 45444F43)
[ 0.000000] ACPI: PM-Timer IO Port: 0x588
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009a000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1300480
[ 0.000000] Kernel command line: initrd=ubuntu-installer/initrd.img-2.6.24-16-nfs root=/dev/nfs nfsroot=192.168.10.1:/builds/ubuntu-nfs,nolock ip=192.168.10.254:192.168.10.1:192.168.10.1:255.255.255.0:ntteo-nfs:eth0:off console=ttyS0,19200n81 BOOT_IMAGE=ubuntu-installer/vmlinuz-2.6.24-16-server
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 3000.120 MHz processor.
[ 147.850819] Console: colour VGA+ 80x25
[ 147.850837] console [ttyS0] enabled
[ 150.058608] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 150.100909] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 150.308590] Memory: 4139920k/5242880k available (2255k kernel code, 53016k reserved, 1032k data, 384k init, 3276588k highmem)
[ 150.376183] virtual kernel memory layout:
[ 150.376183] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 150.376184] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 150.376185] vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB)
[ 150.376185] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 150.376186] .init : 0xc043c000 - 0xc049c000 ( 384 kB)
[ 150.376186] .data : 0xc0333e95 - 0xc0435fe4 (1032 kB)
[ 150.376187] .text : 0xc0100000 - 0xc0333e95 (2255 kB)
[ 150.640506] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 150.688935] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 150.884673] Calibrating delay using timer specific routine.. 6003.60 BogoMIPS (lpj=30018047)
[ 150.935187] Security Framework initialized
[ 150.959696] SELinux: Disabled at boot.
[ 150.982658] AppArmor: AppArmor initialized
[ 151.007167] Failure registering capabilities with primary security module.
[ 151.048308] Mount-cache hash table entries: 512
[ 151.075502] Initializing cgroup subsys ns
[ 151.099468] Initializing cgroup subsys cpuacct
[ 151.126072] monitor/mwait feature present.
[ 151.150578] using mwait in idle threads.
[ 151.174007] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 151.202211] CPU: L2 cache: 4096K
[ 151.221481] CPU: Physical Processor ID: 0
[ 151.245426] CPU: Processor Core ID: 0
[ 151.267299] Compat vDSO mapped to ffffe000.
[ 151.292336] Checking 'hlt' instruction... OK.
[ 151.357172] SMP alternatives: switching to UP code
[ 151.386882] Early unpacking initramfs... done
[ 151.582784] ACPI: Core revision 20070126
[ 151.606244] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 151.653364] CPU0: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06
[ 151.696239] SMP alternatives: switching to SMP code
[ 151.725957] Booting processor 1/1 eip 3000
[ 151.760735] Initializing CPU#1
[ 151.903706] Calibrating delay using timer specific routine.. 6000.24 BogoMIPS (lpj=30001208)
[ 151.903715] monitor/mwait feature present.
[ 151.903717] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 151.903718] CPU: L2 cache: 4096K
[ 151.903720] CPU: Physical Processor ID: 0
[ 151.903721] CPU: Processor Core ID: 1
[ 151.904283] CPU1: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06
[ 152.133481] Total of 2 processors activated (12003.85 BogoMIPS).
[ 152.169556] ENABLING IO-APIC IRQs
[ 152.189529] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 152.443285] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 152.500279] Brought up 2 CPUs
[ 152.518224] net_namespace: 64 bytes
[ 152.539076] Booting paravirtualized kernel on bare hardware
[ 152.572700] Time: 17:04:16 Date: 08/07/08
[ 152.597215] NET: Registered protocol family 16
[ 152.623911] EISA bus registered
[ 152.642703] ACPI: bus type pci registered
[ 152.666868] PCI: PCI BIOS revision 2.10 entry at 0xfd87e, last bus=20
[ 152.705394] PCI: Using configuration type 1
[ 152.730379] Setting up standard PCI resources
[ 152.758309] ACPI: Interpreter enabled
[ 152.780193] ACPI: (supports S0 S4 S5)
[ 152.802317] ACPI: Using IOAPIC for interrupt routing
[ 152.833335] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 152.871061] PCI: Transparent bridge - 0000:00:1e.0
[ 152.902072] ACPI: PCI Interrupt Link [LP00] (IRQs *11)
[ 152.933021] ACPI: PCI Interrupt Link [LP01] (IRQs *10)
[ 152.963973] ACPI: PCI Interrupt Link [LP02] (IRQs *3)
[ 152.994413] ACPI: PCI Interrupt Link [LP03] (IRQs *3)
[ 153.024827] ACPI: Blank IRQ resource
[ 153.046182] ACPI: Resource is not an IRQ entry
[ 153.072748] ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled.
[ 153.108918] ACPI: Blank IRQ resource
[ 153.130275] ACPI: Resource is not an IRQ entry
[ 153.156838] ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
[ 153.193036] ACPI: PCI Interrupt Link [LP06] (IRQs *11)
[ 153.223990] ACPI: PCI Interrupt Link [LP07] (IRQs *5)
[ 153.254417] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 153.288296] pnp: PnP ACPI init
[ 153.306567] ACPI: bus type pnp registered
[ 153.336762] pnp: PnP ACPI: found 11 devices
[ 153.361775] ACPI: ACPI bus type pnp unregistered
[ 153.389359] PnPBIOS: Disabled by ACPI PNP
[ 153.413486] PCI: Using ACPI for IRQ routing
[ 153.438496] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 153.799357] NET: Registered protocol family 8
[ 153.825401] NET: Registered protocol family 20
[ 153.851959] NetLabel: Initializing
[ 153.872306] NetLabel: domain hash size = 128
[ 153.898328] NetLabel: protocols = UNLABELED CIPSOv4
[ 153.927991] NetLabel: unlabeled traffic allowed by default
[ 153.961337] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 153.990728] hpet0: 3 64-bit timers, 14318180 Hz
[ 154.018808] AppArmor: AppArmor Filesystem Enabled
[ 154.022024] Time: tsc clocksource has been installed.
[ 154.114486] system 00:01: ioport range 0x520-0x53f has been reserved
[ 154.152477] system 00:01: ioport range 0x540-0x547 has been reserved
[ 154.190447] system 00:09: ioport range 0x400-0x43f has been reserved
[ 154.228466] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 154.266437] system 00:09: ioport range 0x540-0x55f could not be reserved
[ 154.306486] system 00:09: ioport range 0x580-0x5ff has been reserved
[ 154.344457] system 00:09: ioport range 0x800-0x80f has been reserved
[ 154.382429] system 00:09: ioport range 0xca8-0xcaf has been reserved
[ 154.420400] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[ 154.463042] system 00:09: iomem range 0xfecc0000-0xfecc3fff could not be reserved
[ 154.507766] system 00:09: iomem range 0xfe000000-0xfe01ffff has been reserved
[ 154.550413] system 00:09: iomem range 0xfe020000-0xfe6fffff has been reserved
[ 154.593057] system 00:09: iomem range 0xfe700400-0xfebfffff has been reserved
[ 154.635701] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 154.710798] PCI: Bridge: 0000:11:00.0
[ 154.732675] IO window: disabled.
[ 154.753033] MEM window: disabled.
[ 154.773869] PREFETCH window: disabled.
[ 154.797337] PCI: Bridge: 0000:11:01.0
[ 154.819210] IO window: disabled.
[ 154.839566] MEM window: disabled.
[ 154.860401] PREFETCH window: disabled.
[ 154.883869] PCI: Bridge: 0000:10:00.0
[ 154.905743] IO window: disabled.
[ 154.926098] MEM window: disabled.
[ 154.946931] PREFETCH window: disabled.
[ 154.970402] PCI: Bridge: 0000:10:00.3
[ 154.992275] IO window: disabled.
[ 155.012628] MEM window: disabled.
[ 155.033463] PREFETCH window: disabled.
[ 155.056936] PCI: Bridge: 0000:00:02.0
[ 155.078810] IO window: disabled.
[ 155.099117] MEM window: disabled.
[ 155.119947] PREFETCH window: disabled.
[ 155.143373] PCI: Bridge: 0000:00:03.0
[ 155.165241] IO window: disabled.
[ 155.185549] MEM window: disabled.
[ 155.206376] PREFETCH window: disabled.
[ 155.229804] PCI: Bridge: 0000:00:04.0
[ 155.251671] IO window: 5000-ffff
[ 155.271981] MEM window: disabled.
[ 155.292809] PREFETCH window: disabled.
[ 155.316237] PCI: Bridge: 0000:00:05.0
[ 155.338103] IO window: disabled.
[ 155.358410] MEM window: disabled.
[ 155.379240] PREFETCH window: disabled.
[ 155.402668] PCI: Bridge: 0000:03:00.0
[ 155.424534] IO window: disabled.
[ 155.444846] MEM window: c7000000-caefffff
[ 155.469829] PREFETCH window: disabled.
[ 155.493258] PCI: Bridge: 0000:00:06.0
[ 155.515124] IO window: disabled.
[ 155.535435] MEM window: c7000000-caefffff
[ 155.560417] PREFETCH window: disabled.
[ 155.583847] PCI: Bridge: 0000:00:07.0
[ 155.605764] IO window: 4000-4fff
[ 155.626075] MEM window: cb000000-ccffffff
[ 155.651055] PREFETCH window: caf00000-caffffff
[ 155.678636] PCI: Bridge: 0000:05:00.0
[ 155.700502] IO window: disabled.
[ 155.720812] MEM window: cd000000-cfffffff
[ 155.745847] PREFETCH window: disabled.
[ 155.769328] PCI: Bridge: 0000:00:1c.0
[ 155.791242] IO window: disabled.
[ 155.811555] MEM window: cd000000-cfffffff
[ 155.836538] PREFETCH window: disabled.
[ 155.859965] PCI: Bridge: 0000:00:1e.0
[ 155.881880] IO window: 3000-3fff
[ 155.902191] MEM window: de000000-dfffffff
[ 155.927172] PREFETCH window: d0000000-ddffffff
[ 155.955316] ACPI: PCI Interrupt 0000:11:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 155.999897] ACPI: PCI Interrupt 0000:11:01.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 156.044659] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 156.088947] NET: Registered protocol family 2
[ 156.212511] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 156.255318] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 156.299877] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 156.339603] TCP: Hash tables configured (established 131072 bind 65536)
[ 156.379164] TCP reno registered
[ 156.422368] checking if image is initramfs... it is
[ 156.785921] Freeing initrd memory: 6874k freed
[ 156.813039] audit: initializing netlink socket (disabled)
[ 156.845346] audit(1218128655.980:1): initialized
[ 156.873366] highmem bounce pool size: 64 pages
[ 156.899946] Total HugeTLB memory allocated, 0
[ 156.927243] VFS: Disk quotas dquot_6.5.1
[ 156.950728] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 156.989871] io scheduler noop registered
[ 157.013324] io scheduler anticipatory registered
[ 157.040908] io scheduler deadline registered (default)
[ 157.071611] io scheduler cfq registered
[ 157.094740] assign_interrupt_mode Found MSI capability
[ 157.125570] assign_interrupt_mode Found MSI capability
[ 157.156362] assign_interrupt_mode Found MSI capability
[ 157.187165] assign_interrupt_mode Found MSI capability
[ 157.217963] assign_interrupt_mode Found MSI capability
[ 157.248770] assign_interrupt_mode Found MSI capability
[ 157.279581] assign_interrupt_mode Found MSI capability
[ 157.313293] assign_interrupt_mode Found MSI capability
[ 157.346605] assign_interrupt_mode Found MSI capability
[ 157.379069] isapnp: Scanning for PnP cards...
[ 157.760811] isapnp: No Plug & Play device found
[ 157.802811] Real Time Clock Driver v1.12ac
[ 157.827456] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 157.873867] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 157.910159] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 157.943982] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 157.989311] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 158.035689] PNP: No PS/2 controller found. Probing ports directly.
[ 158.588486] i8042.c: Can't read CTR while initializing i8042.
[ 158.622866] i8042: probe of i8042 failed with error -5
[ 158.687660] mice: PS/2 mouse device common for all mice
[ 158.718965] EISA: Probing bus 0 at eisa.0
[ 158.742960] Cannot allocate resource for EISA slot 3
[ 158.772662] Cannot allocate resource for EISA slot 4
[ 158.802317] Cannot allocate resource for EISA slot 5
[ 158.831980] Cannot allocate resource for EISA slot 6
[ 158.861639] Cannot allocate resource for EISA slot 7
[ 158.891297] Cannot allocate resource for EISA slot 8
[ 158.920952] EISA: Detected 0 cards.
[ 158.941785] cpuidle: using governor ladder
[ 158.966247] cpuidle: using governor menu
[ 158.989728] NET: Registered protocol family 1
[ 159.015766] Using IPI No-Shortcut mode
[ 159.038216] registered taskstats version 1
[ 159.062787] Magic number: 4:852:86
[ 159.084203] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
[ 159.120368] Freeing unused kernel memory: 384k freed
Loading, please wait...
Begin: Loading essential drivers[ 159.264227] ACPI: Processor [CPU1] (supports 8 throttling states... ...
)
[ 159.311860] ACPI: Processor [CPU0] (supports 8 throttling states)
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/nfs-top ...
[ 159.530514] SCSI subsystem initialized
[ 159.564559] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.9 (December 8, 2007)
[ 159.612977] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 159.663030] usbcore: registered new interface driver usbfs
[ 159.695874] usbcore: registered new interface driver hub
[ 159.729094] Adaptec aacraid driver 1.1-5[2449]-ms
[ 159.757306] usbcore: registered new device driver usb
[ 159.822479] USB Universal Host Controller Interface driver v3.0
[ 160.356207] eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem c8000000, IRQ 18, node addr 00:14:5e:16:36:73
[ 160.432665] ACPI: PCI Interrupt 0000:02:00.0[A] -> <6>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 160.498746] GSI 17 (level, low) -> IRQ 17
[ 160.758372] AAC0: kernel 5.1-0[9237] May 30 2006
[ 160.785986] AAC0: monitor 5.1-0[9237]
[ 160.807856] AAC0: bios 5.1-0[9237]
[ 160.828167] AAC0: serial 600A4001
[ 160.847956] AAC0: 64bit support enabled.
[ 160.871384] AAC0: 64 Bit DAC enabled
[ 160.900040] scsi0 : ServeRAID
[ 160.917959] scsi 0:0:0:0: Direct-Access ServeRA RAID1 V1.0 PQ: 0 ANSI: 2
[ 160.971747] scsi 0:1:1:0: Direct-Access IBM-ESXS ST973401SS B51D PQ: 0 ANSI: 5
[ 161.022400] scsi 0:1:3:0: Direct-Access IBM-ESXS ST973401SS B51D PQ: 0 ANSI: 5
[ 161.028040] eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem ce000000, IRQ 16, node addr 00:14:5e:16:36:75
[ 161.148060] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 161.192342] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 161.223835] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 161.271970] ehci_hcd 0000:00:1d.7: debug port 1
[ 161.299089] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf9000000
[ 161.350755] scsi 0:3:0:0: Enclosure IBM SAS SES-2 DEVICE 1.06 PQ: 0 ANSI: 5
[ 161.355259] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 161.355338] usb usb1: configuration #1 chosen from 1 choice
[ 161.355354] hub 1-0:1.0: USB hub found
[ 161.355358] hub 1-0:1.0: 6 ports detected
[ 161.524958] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 23 (level, low) -> IRQ 19
[ 161.569351] scsi1 : ata_piix
[ 161.586623] scsi2 : ata_piix
[ 161.603846] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x480 irq 14
[ 161.644989] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x488 irq 15
[ 161.735872] Driver 'sd' needs updating - please use bus_type methods
[ 161.773957] sd 0:0:0:0: [sda] 143132672 512-byte hardware sectors (73284 MB)
[ 161.816152] sd 0:0:0:0: [sda] Write Protect is off
[ 161.844840] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 161.844895] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 161.844932] sd 0:0:0:0: [sda] 143132672 512-byte hardware sectors (73284 MB)
[ 161.844938] sd 0:0:0:0: [sda] Write Protect is off
[ 161.844950] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 161.844951] sda: sda1 sda2
[ 162.065940] scsi 0:1:1:0: Attached scsi generic sg1 type 0
[ 162.066026] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 162.131538] scsi 0:1:3:0: Attached scsi generic sg2 type 0
[ 162.164369] scsi 0:3:0:0: Attached scsi generic sg3 type 13
[ 162.174718] ata1.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, 1.02, max UDMA/33
[ 162.424344] ata1.00: configured for UDMA/33
[ 162.453595] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4244N 1.02 PQ: 0 ANSI: 5
[ 162.502034] scsi 1:0:0:0: Attached scsi generic sg4 type 5
[ 162.534855] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 162.579180] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 162.610458] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 162.654715] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00002200
[ 162.689163] usb usb2: configuration #1 chosen from 1 choice
[ 162.722498] hub 2-0:1.0: USB hub found
[ 162.744925] hub 2-0:1.0: 2 ports detected
[ 162.876202] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 20
[ 162.920543] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 162.951824] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 162.996088] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00002600
[ 163.030520] usb usb3: configuration #1 chosen from 1 choice
[ 163.063868] hub 3-0:1.0: USB hub found
[ 163.086294] hub 3-0:1.0: 2 ports detected
[ 163.213353] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 19
[ 163.257657] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 163.288934] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 163.333196] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00002a00
[ 163.367632] usb usb4: configuration #1 chosen from 1 choice
[ 163.400991] hub 4-0:1.0: USB hub found
[ 163.423408] hub 4-0:1.0: 2 ports detected
[ 163.557152] Driver 'sr' needs updating - please use bus_type methods
[ 163.612239] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 163.652856] Uniform CD-ROM driver Revision: 3.20
Done.
[ 163.775057] RPC: Registered udp transport module.
[ 163.803159] RPC: Registered tcp transport module.
[ 163.838853] NET: Registered protocol family 17
IP-Config: eth0 hardware address 00:14:5e:16:36:73 mtu 1500
[ 164.012498] bnx2: eth0: using MSI
IP-Config: eth0 guessed broadcast address 192.168.10.255
IP-Config: eth0 guessed nameserver address 192.168.10.1
IP-Config: eth0 complete (from 192.168.10.1):
address: 192.168.10.254 broadcast: 192.168.10.255 netmask: 255.255.255.0
gateway: 192.168.10.1 dns0 : 192.168.10.1 dns1 : 0.0.0.0
host : ntteo-nfs
rootserver: 192.168.10.1 rootpath:
filename :
Begin: Running /scripts/nfs-premount ...
Done.
--
NFSroot broken on hardy
https://bugs.launchpad.net/bugs/221613
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to initramfs-tools in ubuntu.
More information about the kernel-bugs
mailing list