[Bug 35638] Re: Printer is not detected properly over USB

[dracon]

Sorry bout the goose chase.. seemed to work for me so I thought I'd pass it along..(messed up the launchpad in the bargain...my bad!.CUPS is a puzzle I think is still missing a piece or two..your experience is strange and different than mine so I have no ideas left. Sorry. If I think of something I'll email it but really have no idea. Now I am running Gutsy and I think you said you are on Hardy..so maybe there is a difference there, dunno. Got me stumped.
Good luck,
Bill

quixote <commer at greenglim.com> wrote: I tried setting up a new printer, R220-test, with the URI as suggested.
Otherwise, same driver, etc.  It worked, I made it default, printed
again, then suspended.

When I came back from suspend, the old Stylus-R220 definition was
working fine and the new default R220-test was "unplugged" !

$lsusb
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 003: ID 04b8:0005 Seiko Epson Corp. Stylus Printer
Bus 001 Device 001: ID 0000:0000  

Running that command did not make R220-test become functional.

I then made the old Stylus-220 definition the default again, and re-
suspended.

Then both R220-test and Stylus-R220 come up as "unplugged".  lsusb shows
nothing on Bus001 or 002. But just running that command makes both
R220-test and Stylus-R220 work.

$lsusb
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 008: ID 04b8:0005 Seiko Epson Corp. Stylus Printer
Bus 001 Device 001: ID 0000:0000 


Color me totally puzzled.  Hopefully it means something to you!

-- 
Printer is not detected properly over USB
https://bugs.launchpad.net/bugs/35638
You received this bug notification because you are a direct subscriber
of the bug.

Status in Source Package "cupsys" in Ubuntu: Confirmed
Status in Source Package "linux-source-2.6.15" in Ubuntu: Won't Fix
Status in Source Package "linux-source-2.6.17" in Ubuntu: Won't Fix
Status in Source Package "linux-source-2.6.20" in Ubuntu: Won't Fix
Status in cupsys in Ubuntu Hardy: Confirmed
Status in linux-source-2.6.15 in Ubuntu Hardy: Won't Fix
Status in linux-source-2.6.17 in Ubuntu Hardy: Won't Fix
Status in linux-source-2.6.20 in Ubuntu Hardy: Won't Fix

Bug description:
Description of the problem:
I have a Brother HL1050 that was detected properly in breezy but does not seem to be in dapper.

Steps to reproduce the problem:
1. Plug printer into usb slot and turn the printer on.
2. Run gnome-cups-add .

Expected results:
Printer to be detected and shown under "Use a detected printer:".  Printer manufacturer to be displayed in Printer Port dropdown.

Actual rsults:
"No printer detected"  is displayed under Use a detected printer. "USB Printer #1 (CANON)" "USB Printer #1 (EPSON)" are displayed in Printer Port dropdown.


       
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.

** Attachment added: "unnamed"
   http://launchpadlibrarian.net/13590672/unnamed

-- 
Printer is not detected properly over USB
https://bugs.launchpad.net/bugs/35638
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux-source-2.6.15 in ubuntu.