[Bug 112452] no sound/integrated audio
Jim B
jimbaber at consultant.com
Fri May 4 20:33:04 UTC 2007
Public bug reported:
Binary package hint: linux-source-2.6.15
New installation of Ubuntu on dual boot config with XP. I have sound in xp, none in ubuntu.
Acer Travelmate 2480 - Integrated Audio Intel 82801g (realtek alc883 chip)
Not muted, audio card registers in devices. No sound output. Will not complete "Test" in Sound Preferences.
lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Expr
ess Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Exp
ress Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express In
tegrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Aud
io Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (r
ev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (r
ev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (r
ev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Control ler (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (re v 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA S torage Controller IDE (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Et hernet Controller (rev 14)
0a:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802. 11g Wireless LAN Controller (rev 02)
0a:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
0a:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
mesg
[ 0.000000] Linux version 2.6.20-15-generic (root at palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009e000 end: 000000000009e000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009e000 size: 0000000000002000 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000004000 end: 00000000000e0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001f590000 end: 000000001f690000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001f690000 size: 0000000000070000 end: 000000001f700000 type: 4
[ 0.000000] copy_e820_map() start: 000000001f700000 size: 0000000000900000 end: 0000000020000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001f690000 (usable)
[ 0.000000] BIOS-e820: 000000001f690000 - 000000001f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 502MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f6690
[ 0.000000] Entering add_active_range(0, 0, 128656) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 128656
[ 0.000000] HighMem 128656 -> 128656
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 128656
[ 0.000000] On node 0 totalpages: 128656
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 973 pages used for memmap
[ 0.000000] Normal zone: 123587 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v002 PTLTD ) @ 0x000f6660
[ 0.000000] ACPI: XSDT (v001 ACRSYS ACRPRDCT 0x06040000 LTP 0x00000000) @ 0x1f692696
[ 0.000000] ACPI: FADT (v003 INTEL CALISTGA 0x06040000 ALAN 0x00000001) @ 0x1f69bc38
[ 0.000000] ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f69bd2c
[ 0.000000] ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f69bd94
[ 0.000000] ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f69bdcc
[ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1f69be08
[ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1f69be62
[ 0.000000] ACPI: SLIC (v001 ACRSYS ACRPRDCT 0x06040000 acer 0x00000000) @ 0x1f69be8a
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20050624) @ 0x1f692be8
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x1f692702
[ 0.000000] ACPI: DSDT (v001 INTEL CALISTGA 0x06040000 MSFT 0x03000000) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: 2 duplicate APIC table ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[ 0.000000] Detected 1600.132 MHz processor.
[ 12.571034] Built 1 zonelists. Total pages: 127651
[ 12.571039] Kernel command line: root=UUID=d13a34a0-cdea-4776-924b-f541df287d71 ro quiet splash
[ 12.571209] mapped APIC to ffffd000 (fee00000)
[ 12.571212] mapped IOAPIC to ffffc000 (fec00000)
[ 12.571215] Enabling fast FPU save and restore... done.
[ 12.571218] Enabling unmasked SIMD FPU exception support... done.
[ 12.571226] Initializing CPU#0
[ 12.571296] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 12.573097] Console: colour VGA+ 80x25
[ 12.573258] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 12.573461] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 12.587078] Memory: 499004k/514624k available (1992k kernel code, 15140k reserved, 893k data, 328k init, 0k highmem)
[ 12.587090] virtual kernel memory layout:
[ 12.587091] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 12.587092] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 12.587094] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB)
[ 12.587095] lowmem : 0xc0000000 - 0xdf690000 ( 502 MB)
[ 12.587096] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 12.587098] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 12.587099] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 12.587103] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 12.587266] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 12.587272] hpet0: 3 64-bit timers, 14318180 Hz
[ 12.588277] Using HPET for base-timer
[ 12.667148] Calibrating delay using timer specific routine.. 3203.79 BogoMIPS (lpj=6407586)
[ 12.667192] Security Framework v1.0.0 initialized
[ 12.667200] SELinux: Disabled at boot.
[ 12.667218] Mount-cache hash table entries: 512
[ 12.667354] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c109 00000000 00000000
[ 12.667363] monitor/mwait feature present.
[ 12.667365] using mwait in idle threads.
[ 12.667369] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 12.667374] CPU: L2 cache: 1024K
[ 12.667377] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002940 0000c109 00000000 00000000
[ 12.667386] Compat vDSO mapped to ffffe000.
[ 12.667390] Remapping vsyscall page to ffffe000
[ 12.667403] Checking 'hlt' instruction... OK.
[ 12.683231] SMP alternatives: switching to UP code
[ 12.683416] Freeing SMP alternatives: 11k freed
[ 12.683604] Early unpacking initramfs... done
[ 13.041340] ACPI: Core revision 20060707
[ 13.066578] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 13.071263] CPU0: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz stepping 08
[ 13.071288] Total of 1 processors activated (3203.79 BogoMIPS).
[ 13.071483] ENABLING IO-APIC IRQs
[ 13.071687] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 13.218341] Brought up 1 CPUs
[ 13.218583] Booting paravirtualized kernel on bare hardware
[ 13.218670] Time: 13:37:53 Date: 04/04/107
[ 13.218697] NET: Registered protocol family 16
[ 13.218781] EISA bus registered
[ 13.218786] ACPI: bus type pci registered
[ 13.227273] PCI: PCI BIOS revision 2.10 entry at 0xfd6c2, last bus=12
[ 13.227275] PCI: Using configuration type 1
[ 13.227277] Setting up standard PCI resources
[ 13.233668] ACPI: Interpreter enabled
[ 13.233671] ACPI: Using IOAPIC for interrupt routing
[ 13.234000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 13.234006] PCI: Probing PCI hardware (bus 00)
[ 13.234672] Boot video device is 0000:00:02.0
[ 13.235327] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 13.235332] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 13.236136] PCI: Transparent bridge - 0000:00:1e.0
[ 13.236208] PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0b) (try 'pci=assign-busses')
[ 13.236211] Please report the result to linux-kernel to fix this permanently
[ 13.236278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 13.242213] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 13.242512] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 13.242741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 13.243493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 13.244046] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 13.244315] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 13.244580] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 13.244845] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 13.245108] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 13.245372] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 13.245640] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 13.245905] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 13.284869] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 13.284883] pnp: PnP ACPI init
[ 13.288131] pnp: PnP ACPI: found 9 devices
[ 13.288135] PnPBIOS: Disabled by ACPI PNP
[ 13.288184] PCI: Using ACPI for IRQ routing
[ 13.288188] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 13.288192] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[ 13.288195] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[ 13.288198] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[ 13.288200] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
[ 13.288203] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
[ 13.288205] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
[ 13.288208] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
[ 13.288210] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
[ 13.288213] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
[ 13.317955] NET: Registered protocol family 8
[ 13.317957] NET: Registered protocol family 20
[ 13.318489] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 13.318511] PCI: Bridge: 0000:00:1c.0
[ 13.318514] IO window: 2000-2fff
[ 13.318521] MEM window: 34000000-340fffff
[ 13.318526] PREFETCH window: disabled.
[ 13.318532] PCI: Bridge: 0000:00:1c.1
[ 13.318533] IO window: disabled.
[ 13.318539] MEM window: disabled.
[ 13.318543] PREFETCH window: disabled.
[ 13.318549] PCI: Bridge: 0000:00:1c.2
[ 13.318551] IO window: disabled.
[ 13.318556] MEM window: disabled.
[ 13.318561] PREFETCH window: disabled.
[ 13.318569] PCI: Bus 11, cardbus bridge: 0000:0a:09.0
[ 13.318572] IO window: 00003000-000030ff
[ 13.318577] IO window: 00003400-000034ff
[ 13.318583] PREFETCH window: 30000000-33ffffff
[ 13.318588] MEM window: 38000000-3bffffff
[ 13.318593] PCI: Bridge: 0000:00:1e.0
[ 13.318596] IO window: 3000-3fff
[ 13.318603] MEM window: d0100000-d01fffff
[ 13.318608] PREFETCH window: 30000000-33ffffff
[ 13.318636] PCI: Enabling device 0000:00:1c.0 (0000 -> 0003)
[ 13.318645] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 13.318654] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 13.318678] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 13.318686] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 13.318711] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 13.318719] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 13.318730] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
[ 13.318737] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 13.318754] PCI: Enabling device 0000:0a:09.0 (0000 -> 0003)
[ 13.318759] ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 13.318789] NET: Registered protocol family 2
[ 13.358148] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 13.358223] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 13.358324] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 13.358380] TCP: Hash tables configured (established 16384 bind 8192)
[ 13.358383] TCP reno registered
[ 13.370183] checking if image is initramfs... it is
[ 14.075781] Freeing initrd memory: 7012k freed
[ 14.075999] Simple Boot Flag at 0x36 set to 0x1
[ 14.076329] audit: initializing netlink socket (disabled)
[ 14.076343] audit(1178285873.572:1): initialized
[ 14.076463] VFS: Disk quotas dquot_6.5.1
[ 14.076482] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 14.076531] io scheduler noop registered
[ 14.076534] io scheduler anticipatory registered
[ 14.076536] io scheduler deadline registered
[ 14.076544] io scheduler cfq registered (default)
[ 14.076806] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 14.076865] assign_interrupt_mode Found MSI capability
[ 14.076868] Allocate Port Service[0000:00:1c.0:pcie00]
[ 14.076902] Allocate Port Service[0000:00:1c.0:pcie02]
[ 14.077044] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 14.077102] assign_interrupt_mode Found MSI capability
[ 14.077104] Allocate Port Service[0000:00:1c.1:pcie00]
[ 14.077135] Allocate Port Service[0000:00:1c.1:pcie02]
[ 14.077254] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 14.077312] assign_interrupt_mode Found MSI capability
[ 14.077314] Allocate Port Service[0000:00:1c.2:pcie00]
[ 14.077348] Allocate Port Service[0000:00:1c.2:pcie02]
[ 14.077521] isapnp: Scanning for PnP cards...
[ 14.431393] isapnp: No Plug & Play device found
[ 14.456748] Real Time Clock Driver v1.12ac
[ 14.456813] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 14.457514] mice: PS/2 mouse device common for all mice
[ 14.458057] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 14.458308] input: Macintosh mouse button emulation as /class/input/input0
[ 14.458344] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 14.458348] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 14.458593] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 14.471939] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 14.479372] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 14.479378] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 14.479380] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 14.479383] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 14.479385] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 14.479789] EISA: Probing bus 0 at eisa.0
[ 14.479798] Cannot allocate resource for EISA slot 1
[ 14.479801] Cannot allocate resource for EISA slot 2
[ 14.479803] Cannot allocate resource for EISA slot 3
[ 14.479825] EISA: Detected 0 cards.
[ 14.509887] TCP cubic registered
[ 14.509894] NET: Registered protocol family 1
[ 14.509918] Using IPI No-Shortcut mode
[ 14.509978] ACPI: (supports S0 S3 S4 S5)
[ 14.510028] Magic number: 7:252:634
[ 14.510116] hash matches device ptycd
[ 14.510204] hash matches device 0000:00:1c.1:pcie00
[ 14.510360] Freeing unused kernel memory: 328k freed
[ 14.512337] Time: tsc clocksource has been installed.
[ 14.530578] input: AT Translated Set 2 keyboard as /class/input/input1
[ 15.749236] Capability LSM initialized
[ 15.784182] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 15.784189] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 15.784199] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 15.787899] ACPI: Thermal Zone [THRM] (49 C)
[ 16.182450] usbcore: registered new interface driver usbfs
[ 16.182475] usbcore: registered new interface driver hub
[ 16.182497] usbcore: registered new device driver usb
[ 16.183381] USB Universal Host Controller Interface driver v3.0
[ 16.183431] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 16.183443] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 16.183447] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 16.183607] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 16.183642] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820
[ 16.183747] usb usb1: configuration #1 chosen from 1 choice
[ 16.183771] hub 1-0:1.0: USB hub found
[ 16.183777] hub 1-0:1.0: 2 ports detected
[ 16.268342] SCSI subsystem initialized
[ 16.273943] libata version 2.20 loaded.
[ 16.285783] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21
[ 16.285796] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 16.285801] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 16.285824] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 16.285860] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001840
[ 16.285953] usb usb2: configuration #1 chosen from 1 choice
[ 16.285984] hub 2-0:1.0: USB hub found
[ 16.285990] hub 2-0:1.0: 2 ports detected
[ 16.389649] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 16.389664] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 16.389668] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 16.389689] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 16.389726] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 16.389822] usb usb3: configuration #1 chosen from 1 choice
[ 16.389846] hub 3-0:1.0: USB hub found
[ 16.389851] hub 3-0:1.0: 2 ports detected
[ 3.796000] Time: hpet clocksource has been installed.
[ 3.812000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 3.812000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.812000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.812000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.812000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 3.812000] usb usb4: configuration #1 chosen from 1 choice
[ 3.812000] hub 4-0:1.0: USB hub found
[ 3.812000] hub 4-0:1.0: 2 ports detected
[ 3.916000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 3.916000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.916000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.916000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.916000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.916000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.916000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0544000
[ 3.920000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.920000] usb usb5: configuration #1 chosen from 1 choice
[ 3.920000] hub 5-0:1.0: USB hub found
[ 3.920000] hub 5-0:1.0: 8 ports detected
[ 3.948000] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 4.024000] ata_piix 0000:00:1f.2: version 2.10ac1
[ 4.024000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 4.180000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21
[ 4.180000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.180000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14
[ 4.180000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15
[ 4.180000] scsi0 : ata_piix
[ 4.360000] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
[ 4.360000] ata1.00: ATA-7: SAMSUNG HM120JI, YF100-10, max UDMA7
[ 4.360000] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.368000] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
[ 4.368000] ata1.00: configured for UDMA/133
[ 4.368000] scsi1 : ata_piix
[ 4.452000] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 4.640000] usb 2-2: configuration #1 chosen from 1 choice
[ 4.656000] usbcore: registered new interface driver hiddev
[ 4.692000] input: HID 1241:1177 as /class/input/input2
[ 4.692000] input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:1d.1-2
[ 4.692000] usbcore: registered new interface driver usbhid
[ 4.692000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 4.704000] ata2.00: ATAPI, max UDMA/33
[ 4.896000] ata2.00: configured for UDMA/33
[ 4.896000] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM120JI YF10 PQ: 0 ANSI: 5
[ 4.920000] scsi 1:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462D AC01 PQ: 0 ANSI: 5
[ 4.936000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 4.936000] sda: Write Protect is off
[ 4.936000] sda: Mode Sense: 00 3a 00 00
[ 4.936000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.936000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 4.936000] sda: Write Protect is off
[ 4.936000] sda: Mode Sense: 00 3a 00 00
[ 4.936000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.936000] sda: sda1 sda2 sda3 sda4
[ 5.416000] sd 0:0:0:0: Attached scsi disk sda
[ 5.420000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.420000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.572000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 5.572000] Uniform CD-ROM driver Revision: 3.20
[ 5.572000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.720000] Attempting manual resume
[ 5.720000] swsusp: Resume From Partition 8:4
[ 5.720000] PM: Checking swsusp image.
[ 5.720000] PM: Resume from disk failed.
[ 5.764000] kjournald starting. Commit interval 5 seconds
[ 5.764000] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.548000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.552000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.588000] Linux agpgart interface v0.102 (c) Dave Jones
[ 17.592000] agpgart: Detected an Intel 945GM Chipset.
[ 17.592000] agpgart: Detected 7932K stolen memory.
[ 17.608000] agpgart: AGP aperture is 256M @ 0xc0000000
[ 18.144000] Yenta: CardBus bridge found at 0000:0a:09.0 [1025:0110]
[ 18.144000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 18.144000] Yenta: Routing CardBus interrupts to PCI
[ 18.144000] Yenta TI: socket 0000:0a:09.0, mfunc 0x01321b22, devctl 0x66
[ 18.376000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 19
[ 18.376000] Socket status: 30000006
[ 18.376000] Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[ 18.376000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 18.376000] cs: IO port probe 0x3000-0x3fff: clean.
[ 18.376000] pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff
[ 18.376000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[ 18.396000] PCI: Enabling device 0000:02:00.0 (0000 -> 0003)
[ 18.396000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 18.396000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 18.396000] sky2 0000:02:00.0: v1.13 addr 0x34000000 irq 16 Yukon-FE (0xb7) rev 1
[ 18.396000] sky2 eth0: addr 00:16:36:d0:22:9a
[ 18.448000] ACPI: PCI Interrupt 0000:0a:09.2[A] -> GSI 20 (level, low) -> IRQ 19
[ 18.584000] intel_rng: FWH not detected
[ 18.620000] iTCO_vendor_support: vendor-support=0
[ 18.620000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 18.868000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 18.868000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 18.908000] ieee80211_crypt: registered algorithm 'NULL'
[ 18.916000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 18.916000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
[ 18.944000] sky2 eth1: enabling interface
[ 18.948000] sky2 eth1: ram buffer 4K
[ 18.996000] bcm43xx driver
[ 19.040000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
[ 19.100000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 19.104000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 19.104000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 19.264000] cs: IO port probe 0x100-0x3af: clean.
[ 19.264000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 19.264000] cs: IO port probe 0x820-0x8ff: clean.
[ 19.264000] cs: IO port probe 0xc00-0xcf7: clean.
[ 19.268000] cs: IO port probe 0xa00-0xaff: clean.
[ 19.352000] ACPI: PCI Interrupt 0000:0a:03.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 19.448000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 19.480000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 19.488000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 19.572000] fuse init (API version 7.8)
[ 19.632000] lp: driver loaded but no devices found
[ 19.656000] Adding 3646744k swap on /dev/disk/by-uuid/2569a191-3e05-4535-85a1-75ce6ab4b9bc. Priority:-1 extents:1 across:3646744k
[ 19.916000] EXT3 FS on sda3, internal journal
[ 20.148000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 20.172000] NET: Registered protocol family 17
[ 20.244000] NTFS volume version 3.1.
[ 20.304000] NTFS volume version 3.1.
[ 20.668000] sky2 eth1: Link is up at 100 Mbps, full duplex, flow control rx
[ 22.024000] NET: Registered protocol family 10
[ 22.024000] lo: Disabled Privacy Extensions
[ 24.604000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 24.624000] ACPI: AC Adapter [ACAD] (on-line)
[ 24.788000] ACPI: ACPI Dock Station Driver
[ 24.824000] ACPI: Battery Slot [BAT1] (battery present)
[ 24.836000] Using specific hotkey driver
[ 24.868000] ibm_acpi: ec object not found
[ 24.940000] input: Power Button (FF) as /class/input/input4
[ 24.944000] ACPI: Power Button (FF) [PWRF]
[ 24.992000] input: Lid Switch as /class/input/input5
[ 24.996000] ACPI: Lid Switch [LID]
[ 25.040000] input: Power Button (CM) as /class/input/input6
[ 25.040000] ACPI: Power Button (CM) [PWRB]
[ 25.084000] input: Sleep Button (CM) as /class/input/input7
[ 25.088000] ACPI: Sleep Button (CM) [SLPB]
[ 25.120000] pcc_acpi: loading...
[ 25.136000] wmi_add device=dddb5000
[ 25.136000] calling WQBA
[ 29.316000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 30.192000] [drm] Initialized drm 1.1.0 20060810
[ 30.196000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 30.200000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 30.952000] ppdev: user-space parallel port driver
[ 31.652000] apm: BIOS not found.
[ 31.908000] Bluetooth: Core ver 2.11
[ 31.908000] NET: Registered protocol family 31
[ 31.908000] Bluetooth: HCI device and connection manager initialized
[ 31.908000] Bluetooth: HCI socket layer initialized
[ 31.940000] Bluetooth: L2CAP ver 2.8
[ 31.940000] Bluetooth: L2CAP socket layer initialized
[ 32.044000] Bluetooth: RFCOMM socket layer initialized
[ 32.044000] Bluetooth: RFCOMM TTY layer initialized
[ 32.044000] Bluetooth: RFCOMM ver 1.8
[ 32.888000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 48.408000] eth1: no IPv6 routers present
[ 54.112000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 56.132000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 79.360000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 103.288000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 110.580000] usb 5-2: new high speed USB device using ehci_hcd and address 3
[ 110.716000] usb 5-2: configuration #1 chosen from 1 choice
[ 110.872000] usbcore: registered new interface driver libusual
[ 110.888000] Initializing USB Mass Storage driver...
[ 110.888000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 110.888000] usbcore: registered new interface driver usb-storage
[ 110.888000] USB Mass Storage support registered.
[ 110.888000] usb-storage: device found at 3
[ 110.888000] usb-storage: waiting for device to settle before scanning
[ 115.888000] usb-storage: device scan complete
[ 115.888000] scsi 2:0:0:0: Direct-Access Memorex TD Classic 003B PMAP PQ: 0 ANSI: 0 CCS
[ 116.764000] SCSI device sdb: 2009088 512-byte hdwr sectors (1029 MB)
[ 116.764000] sdb: Write Protect is off
[ 116.764000] sdb: Mode Sense: 23 00 00 00
[ 116.764000] sdb: assuming drive cache: write through
[ 116.768000] SCSI device sdb: 2009088 512-byte hdwr sectors (1029 MB)
[ 116.768000] sdb: Write Protect is off
[ 116.768000] sdb: Mode Sense: 23 00 00 00
[ 116.768000] sdb: assuming drive cache: write through
[ 116.768000] sdb: sdb1
[ 116.768000] sd 2:0:0:0: Attached scsi removable disk sdb
[ 116.768000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 126.504000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 149.720000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 272.936000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 396.152000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 498.132000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 521.008000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 644.228000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 767.448000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 783.132000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 891.812000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 992.128000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 1015.064000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 1138.944000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 1248.128000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 1262.160000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 1385.428000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 1510.248000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 1633.576000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 1674.128000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 1756.800000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 1880.016000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 1948.124000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 2003.232000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 2128.052000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 2152.124000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 2251.268000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 2374.488000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 2499.308000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 2622.528000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 2628.120000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 2745.760000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 2867.120000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 2868.976000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 2992.192000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 3102.120000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 3117.012000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 3240.228000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 3363.564000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 3487.688000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 3515.116000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 3610.972000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 3735.064000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 3853.116000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 3858.360000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 3981.588000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 4106.428000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 4221.116000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 4229.652000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 4352.872000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 4476.088000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 4599.304000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 4613.108000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 4724.124000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 4847.340000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 4970.556000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 4980.116000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 5095.376000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 5218.592000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 5299.104000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 5341.812000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 5465.028000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 5538.108000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 5588.244000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 5713.076000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 5793.108000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 5836.324000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 5959.616000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 5976.712000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 6083.564000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 6161.104000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 6206.796000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 6331.076000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 6454.292000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 6535.104000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 6577.512000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 6702.332000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 6759.104000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 6825.556000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 6948.776000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 7072.000000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 7151.100000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 7195.228000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 7320.068000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 7443.292000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 7472.100000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 7566.512000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 7691.356000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 7814.592000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 7869.096000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 7937.816000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 8061.032000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 8184.252000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 8309.072000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 8341.096000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 8432.292000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 8555.524000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 8679.100000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 8799.092000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 8802.316000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 8926.956000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 9050.232000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 9113.092000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 9173.448000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 9298.268000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 9421.488000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 9524.092000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 9544.708000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 9667.924000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 9727.088000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 9791.140000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
** Affects: linux-source-2.6.15 (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
no sound/integrated audio
https://bugs.launchpad.net/bugs/112452
You received this bug notification because you are a member of Kernel
Bugs, which is a bug contact for linux-source-2.6.15 in ubuntu.
More information about the kernel-bugs
mailing list