[Bug 62576] Re: Dapper instalation freezes at 15% on sony vaio vgn-s5hp

Txus Sanchez txusinho at gmail.com
Fri Jan 19 16:54:41 UTC 2007


Here are the kernel messages that appeared during the instalation. I
tried to do some things when freezed and maybe there is many times the
same output:

[17181505.668000]  <c0135ee0> kthread+0x0/0xe0  <c0101005>
kernel_thread_helper+0x5/0x10
[17181505.668000] ata1: status=0x50 { DriveReady SeekComplete }
[17181505.668000] sda: Current: sense key: No Sense
[17181505.668000]     Additional sense: No additional sense information
[17181505.668000] Info fld=0x9470250
[17181535.672000] ata1: handling error/timeout
[17181535.672000] ata1: port reset, p_is 0 is 0 pis 0 cmd 4017 tf 80 ss 113 se 0
[17181535.672000] BUG: warning at drivers/scsi/ahci.c:1283/ahci_host_intr()
[17181535.672000]  <f885fcbf> ahci_interrupt+0x1ef/0x200 [ahci]
<c0149323> handle_IRQ_event+0x33/0x60
[17181535.672000]  <c01493ed> __do_IRQ+0x9d/0x110  <c0122e9b> printk+0x1b/0x20
[17181535.672000]  <c0105c89> do_IRQ+0x19/0x30  <c010408a>
common_interrupt+0x1a/0x20
[17181535.672000]  <c02daad9> _spin_unlock_irqrestore+0x9/0x10
<f8860048> ahci_eng_timeout+0x78/0xa0 [ahci]
[17181535.672000]  <f88c1ef0> scsi_error_handler+0x0/0xc90 [scsi_mod]
<f88acf5f> ata_scsi_error+0x5f/0x130 [libata]
[17181535.672000]  <f88c1fc3> scsi_error_handler+0xd3/0xc90 [scsi_mod]
 <c011c930> complete+0x40/0x60
[17181535.672000]  <f88c1ef0> scsi_error_handler+0x0/0xc90 [scsi_mod]
<c0135f8b> kthread+0xab/0xe0
[17181535.672000]  <c0135ee0> kthread+0x0/0xe0  <c0101005>
kernel_thread_helper+0x5/0x10
[17181535.672000] ata1: status=0x50 { DriveReady SeekComplete }
[17181535.672000] sda: Current: sense key: No Sense
[17181535.672000]     Additional sense: No additional sense information
[17181565.680000] ata1: handling error/timeout
[17181565.680000] ata1: port reset, p_is 0 is 0 pis 0 cmd 4017 tf 80 ss 113 se 0
[17181565.680000] BUG: warning at drivers/scsi/ahci.c:1283/ahci_host_intr()
[17181565.680000]  <f885fcbf> ahci_interrupt+0x1ef/0x200 [ahci]
<c0149323> handle_IRQ_event+0x33/0x60
[17181565.680000]  <c01493ed> __do_IRQ+0x9d/0x110  <c0122e9b> printk+0x1b/0x20
[17181565.680000]  <c0105c89> do_IRQ+0x19/0x30  <c010408a>
common_interrupt+0x1a/0x20
[17181565.680000]  <c02daad9> _spin_unlock_irqrestore+0x9/0x10
<f8860048> ahci_eng_timeout+0x78/0xa0 [ahci]
[17181565.680000]  <f88c1ef0> scsi_error_handler+0x0/0xc90 [scsi_mod]
<f88acf5f> ata_scsi_error+0x5f/0x130 [libata]
[17181565.680000]  <f88c1fc3> scsi_error_handler+0xd3/0xc90 [scsi_mod]
 <c011c930> complete+0x40/0x60
[17181565.680000]  <f88c1ef0> scsi_error_handler+0x0/0xc90 [scsi_mod]
<c0135f8b> kthread+0xab/0xe0
[17181565.680000]  <c0135ee0> kthread+0x0/0xe0  <c0101005>
kernel_thread_helper+0x5/0x10
[17181565.684000] BUG: warning at drivers/scsi/ahci.c:1283/ahci_host_intr()
[17181565.684000]  <f885fcbf> ahci_interrupt+0x1ef/0x200 [ahci]
<c0149323> handle_IRQ_event+0x33/0x60
[17181565.684000]  <c01493ed> __do_IRQ+0x9d/0x110  <c0105c89> do_IRQ+0x19/0x30
[17181565.684000]  <c010408a> common_interrupt+0x1a/0x20  <c02daad9>
_spin_unlock_irqrestore+0x9/0x10
[17181565.684000]  <f8860048> ahci_eng_timeout+0x78/0xa0 [ahci]
<f88c1ef0> scsi_error_handler+0x0/0xc90 [scsi_mod]
[17181565.684000]  <f88acf5f> ata_scsi_error+0x5f/0x130 [libata]
<f88c1fc3> scsi_error_handler+0xd3/0xc90 [scsi_mod]
[17181565.684000]  <c011c930> complete+0x40/0x60  <f88c1ef0>
scsi_error_handler+0x0/0xc90 [scsi_mod]
[17181565.684000]  <c0135f8b> kthread+0xab/0xe0  <c0135ee0> kthread+0x0/0xe0
[17181565.684000]  <c0101005> kernel_thread_helper+0x5/0x10

And here is the Installer crashed output:

Traceback (most recent call last):
  File "/usr/bin/ubiquity", line 166, in ?
    main()
  File "/usr/bin/ubiquity", line 161, in main
    install(sys.argv[1])
  File "/usr/bin/ubiquity", line 57, in install
    ret = wizard.run()
  File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 305, in run
    self.process_step()
  File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 856, in process_step
    self.progress_loop()
  File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 628, in progress_loop
    raise RuntimeError, ("Install failed with exit code %s\n%s" %
RuntimeError: Install failed with exit code 1
Traceback (most recent call last):
  File "/usr/share/ubiquity/install.py", line 1404, in ?
    install.run()
  File "/usr/share/ubiquity/install.py", line 306, in run
    self.copy_all()
  File "/usr/share/ubiquity/install.py", line 484, in copy_all
    shutil.copyfile(sourcepath, targetpath)
  File "shutil.py", line 49, in copyfile
    copyfileobj(fsrc, fdst)
  File "shutil.py", line 25, in copyfileobj
    fdst.write(buf)
IOError: [Errno 30] Read-only file system

If it has no sense is because I tried to force some times the hard disk
to work O:-) Anyway I think the kernel output will be enough.

-- 
Dapper instalation freezes at 15% on sony vaio vgn-s5hp
https://launchpad.net/bugs/62576




More information about the kernel-bugs mailing list