[Bug 131292] dell dimension 9200 - shutdown doesn't work
kfoltman
wdev at foltman.com
Thu Aug 9 12:42:33 UTC 2007
Public bug reported:
Binary package hint: linux-image-lowlatency
halt or restart won't work - the machine freezes after shutting the
system down (the black progress bar goes to the end), the only way to
get it to boot is holding down the power button for 10 seconds (the Dell
case doesn't seem to have a proper Reset button).
Note that, although closed source nvidia driver is loaded, the same
thing also happens without the driver (it doesn't seem to be a bug in
the closed source module).
Kernel image installed is:
ii linux-image-lo 2.6.20.16.28.1 Low latency Linux kernel image
/proc/modules:
snd_rtctimer 4384 1 - Live 0xf8f87000
binfmt_misc 13064 1 - Live 0xf8f90000
rfcomm 41752 0 - Live 0xf8fa1000
l2cap 26112 5 rfcomm, Live 0xf8f99000
bluetooth 57444 4 rfcomm,l2cap, Live 0xf8ff1000
ppdev 10116 0 - Live 0xf8f8c000
cpufreq_userspace 5408 0 - Live 0xf8f84000
cpufreq_ondemand 9356 0 - Live 0xf8f79000
cpufreq_conservative 8200 0 - Live 0xf8f7d000
cpufreq_powersave 2688 0 - Live 0xf88c4000
cpufreq_stats 7488 0 - Live 0xf8f6e000
freq_table 5792 2 cpufreq_ondemand,cpufreq_stats, Live 0xf8f71000
dev_acpi 12164 0 - Live 0xf8f67000
pcc_acpi 13184 0 - Live 0xf8f74000
tc1100_wmi 8068 0 - Live 0xf8f6b000
sony_acpi 6284 0 - Live 0xf8ab5000
dock 10424 0 - Live 0xf8b64000
video 16260 0 - Live 0xf8f5c000
sbs 15528 0 - Live 0xf8f62000
i2c_ec 6016 1 sbs, Live 0xf8b61000
container 5248 0 - Live 0xf8abf000
asus_acpi 17308 0 - Live 0xf8a99000
backlight 6784 1 asus_acpi, Live 0xf8972000
button 8720 0 - Live 0xf8b5d000
battery 10756 0 - Live 0xf8b59000
ac 6020 0 - Live 0xf8a74000
ipv6 274080 12 - Live 0xf8fad000
parport_pc 36644 0 - Live 0xf8b80000
lp 12548 0 - Live 0xf8ab0000
parport 37576 3 ppdev,parport_pc,lp, Live 0xf8b75000
fuse 46996 0 - Live 0xf8b68000
af_packet 24072 2 - Live 0xf8ab8000
snd_hda_intel 22168 1 - Live 0xf8aa9000
snd_hda_codec 205056 1 snd_hda_intel, Live 0xf8b25000
snd_pcm_oss 45056 0 - Live 0xf8ad7000
snd_mixer_oss 17920 1 snd_pcm_oss, Live 0xf8a93000
snd_pcm 80260 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss, Live 0xf8ac2000
snd_seq_dummy 4740 0 - Live 0xf8a4a000
snd_seq_oss 33408 0 - Live 0xf8a9f000
snd_seq_midi 9600 0 - Live 0xf8a68000
snd_rawmidi 25856 1 snd_seq_midi, Live 0xf8a7d000
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi, Live 0xf8a64000
snd_seq 53232 7 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event, Live 0xf8a85000
snd_timer 24196 3 snd_rtctimer,snd_pcm,snd_seq, Live 0xf8a6d000
snd_seq_device 9100 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq, Live 0xf8a60000
nvidia 6837908 0 - Live 0xf9225000 (P)
xpad 9988 0 - Live 0xf8a46000
i2c_core 23424 2 i2c_ec,nvidia, Live 0xf8a59000
psmouse 38792 0 - Live 0xf8a4e000
pcspkr 4224 0 - Live 0xf8975000
serio_raw 7940 0 - Live 0xf896c000
snd 54788 13 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device, Live 0xf89f0000
soundcore 9440 1 snd, Live 0xf89ca000
snd_page_alloc 10888 2 snd_hda_intel,snd_pcm, Live 0xf89c6000
iTCO_wdt 12072 0 - Live 0xf89c2000
iTCO_vendor_support 4868 1 iTCO_wdt, Live 0xf896f000
shpchp 34324 0 - Live 0xf89b8000
pci_hotplug 33608 1 shpchp, Live 0xf89ae000
intel_agp 25372 1 - Live 0xf89a6000
agpgart 35788 2 nvidia,intel_agp, Live 0xf8978000
tsdev 8768 0 - Live 0xf893a000
evdev 11008 4 - Live 0xf8936000
joydev 10816 0 - Live 0xf886d000
ext3 134152 2 - Live 0xf89ce000
jbd 63528 1 ext3, Live 0xf8995000
mbcache 9604 1 ext3, Live 0xf8828000
usb_storage 72128 0 - Live 0xf8982000
sg 35996 0 - Live 0xf8901000
sr_mod 17188 0 - Live 0xf892b000
cdrom 37664 1 sr_mod, Live 0xf8961000
sd_mod 23556 5 - Live 0xf88ea000
generic 5124 0 [permanent], Live 0xf887b000
ata_generic 9092 0 - Live 0xf88e6000
usbhid 26720 0 - Live 0xf88f9000
hid 27392 1 usbhid, Live 0xf88f1000
libusual 17936 1 usb_storage, Live 0xf8858000
ata_piix 15620 3 - Live 0xf8866000
libata 125848 2 ata_generic,ata_piix, Live 0xf890b000
scsi_mod 143116 5 usb_storage,sg,sr_mod,sd_mod,libata, Live 0xf88a0000
ehci_hcd 34316 0 - Live 0xf8871000
e1000 126272 0 - Live 0xf88c6000
uhci_hcd 25488 0 - Live 0xf885e000
usbcore 135048 7 xpad,usb_storage,usbhid,libusual,ehci_hcd,uhci_hcd, Live 0xf887e000
thermal 14856 0 - Live 0xf8850000
processor 31560 1 thermal, Live 0xf8835000
fan 5636 0 - Live 0xf8832000
fbcon 43296 0 - Live 0xf883e000
tileblit 3584 1 fbcon, Live 0xf8830000
font 9216 1 fbcon, Live 0xf882c000
bitblit 6912 1 fbcon, Live 0xf8823000
softcursor 3200 1 bitblit, Live 0xf8826000
vesafb 9220 0 - Live 0xf8819000
capability 5896 0 - Live 0xf8820000
commoncap 8192 1 capability, Live 0xf881d000
/proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
stepping : 6
cpu MHz : 2394.143
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4790.64
clflush size : 64
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
stepping : 6
cpu MHz : 2394.143
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4787.99
clflush size : 64
lspci:
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HH (ICH8DH) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0400 (rev a1)
/proc/acpi/info:
version: 20060707
dmesg:
[ 0.000000] Linux version 2.6.20-16-lowlatency (root at terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP PREEMPT Thu Jun 7 20:23:03 UTC 2007 (Ubuntu Unofficial)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000007fd53c00 end: 000000007fe53c00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000007fe53c00 size: 0000000000002000 end: 000000007fe55c00 type: 4
[ 0.000000] copy_e820_map() start: 000000007fe55c00 size: 0000000000002000 end: 000000007fe57c00 type: 3
[ 0.000000] copy_e820_map() start: 000000007fe57c00 size: 00000000001a8400 end: 0000000080000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000100400 end: 00000000fed00400 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed20000 size: 0000000000080000 end: 00000000feda0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000100000 end: 00000000fef00000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe53c00 (usable)
[ 0.000000] BIOS-e820: 000000007fe53c00 - 000000007fe55c00 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fe55c00 - 000000007fe57c00 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fe57c00 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fe710
[ 0.000000] Entering add_active_range(0, 0, 523859) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 523859
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 523859
[ 0.000000] On node 0 totalpages: 523859
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2300 pages used for memmap
[ 0.000000] HighMem zone: 292183 pages, LIFO batch:31
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v002 DELL ) @ 0x000febf0
[ 0.000000] ACPI: XSDT (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x000fd08b
[ 0.000000] ACPI: FADT (v003 DELL B8K 0x00000014 ASL 0x00000061) @ 0x000fd1ab
[ 0.000000] ACPI: SSDT (v001 DELL st_ex 0x00001000 INTL 0x20050624) @ 0xfffd09d9
[ 0.000000] ACPI: MADT (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x000fd29f
[ 0.000000] ACPI: BOOT (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x000fd331
[ 0.000000] ACPI: MCFG (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x000fd359
[ 0.000000] ACPI: HPET (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x000fd397
[ 0.000000] ACPI: DUMY (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x7fe55c00
[ 0.000000] ACPI: SLIC (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x000fd3cf
[ 0.000000] ACPI: DSDT (v001 DELL dt_ex 0x00001000 INTL 0x20050624) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] Detected 2394.143 MHz processor.
[ 10.688753] Built 1 zonelists. Total pages: 519767
[ 10.688755] Kernel command line: root=UUID=37f45ee6-6390-4f86-af5e-cd024a6f2ea5 ro quiet splash
[ 10.688857] mapped APIC to ffffd000 (fee00000)
[ 10.688859] mapped IOAPIC to ffffc000 (fec00000)
[ 10.688860] Enabling fast FPU save and restore... done.
[ 10.688862] Enabling unmasked SIMD FPU exception support... done.
[ 10.688868] Initializing CPU#0
[ 10.688909] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 10.690205] Console: colour VGA+ 80x25
[ 10.690468] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 10.690715] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 10.746699] Memory: 2066360k/2095436k available (2019k kernel code, 27788k reserved, 902k data, 328k init, 1177932k highmem)
[ 10.746705] virtual kernel memory layout:
[ 10.746706] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 10.746707] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 10.746708] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 10.746708] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 10.746709] .init : 0xc03e1000 - 0xc0433000 ( 328 kB)
[ 10.746710] .data : 0xc02f8c85 - 0xc03da6d4 ( 902 kB)
[ 10.746711] .text : 0xc0100000 - 0xc02f8c85 (2019 kB)
[ 10.746713] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 10.746821] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 10.746825] hpet0: 3 64-bit timers, 14318180 Hz
[ 10.747827] Using HPET for base-timer
[ 10.807718] Calibrating delay using timer specific routine.. 4790.64 BogoMIPS (lpj=2395323)
[ 10.807750] Security Framework v1.0.0 initialized
[ 10.807754] SELinux: Disabled at boot.
[ 10.807766] Mount-cache hash table entries: 512
[ 10.807866] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 10.807872] monitor/mwait feature present.
[ 10.807873] using mwait in idle threads.
[ 10.807876] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 10.807878] CPU: L2 cache: 4096K
[ 10.807880] CPU: Physical Processor ID: 0
[ 10.807881] CPU: Processor Core ID: 0
[ 10.807882] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 10.807889] Compat vDSO mapped to ffffe000.
[ 10.807892] Remapping vsyscall page to ffffe000
[ 10.807901] Checking 'hlt' instruction... OK.
[ 10.811800] SMP alternatives: switching to UP code
[ 10.812053] Early unpacking initramfs... done
[ 11.033197] ACPI: Core revision 20060707
[ 11.051249] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 11.150338] CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 11.150352] SMP alternatives: switching to SMP code
[ 11.150398] Booting processor 1/1 eip 3000
[ 11.160959] Initializing CPU#1
[ 11.220999] Calibrating delay using timer specific routine.. 4787.99 BogoMIPS (lpj=2393998)
[ 11.221004] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 11.221007] monitor/mwait feature present.
[ 11.221009] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 11.221011] CPU: L2 cache: 4096K
[ 11.221012] CPU: Physical Processor ID: 0
[ 11.221013] CPU: Processor Core ID: 1
[ 11.221014] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 11.221566] CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 11.221581] Total of 2 processors activated (9578.64 BogoMIPS).
[ 11.221702] ENABLING IO-APIC IRQs
[ 11.221863] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 11.332806] checking TSC synchronization across 2 CPUs: passed.
[ 0.001000] Brought up 2 CPUs
[ 0.050047] migration_cost=29
[ 0.050245] Booting paravirtualized kernel on bare hardware
[ 0.050302] Time: 12:23:14 Date: 07/09/107
[ 0.050323] NET: Registered protocol family 16
[ 0.050382] EISA bus registered
[ 0.050385] ACPI: bus type pci registered
[ 0.084533] PCI: PCI BIOS revision 2.10 entry at 0xfb78a, last bus=4
[ 0.084534] PCI: Using configuration type 1
[ 0.084536] Setting up standard PCI resources
[ 0.168114] ACPI: Interpreter enabled
[ 0.168116] ACPI: Using IOAPIC for interrupt routing
[ 0.174517] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.174523] PCI: Probing PCI hardware (bus 00)
[ 0.174535] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 0.185918] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.185921] PCI quirk: region 0880-08bf claimed by ICH6 GPIO
[ 0.186088] Boot video device is 0000:01:00.0
[ 0.186287] PCI: Transparent bridge - 0000:00:1e.0
[ 0.186331] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 2.250340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 2.263281] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 2.288164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 2.300980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
[ 2.389437] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 2.391153] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 2.392850] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 2.394591] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 2.396308] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 2.398002] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 2.399725] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 2.401420] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15)
[ 2.404281] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 2.404288] pnp: PnP ACPI init
[ 2.473698] pnp: PnP ACPI: found 9 devices
[ 2.473701] PnPBIOS: Disabled by ACPI PNP
[ 2.473735] PCI: Using ACPI for IRQ routing
[ 2.473737] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 2.482827] NET: Registered protocol family 8
[ 2.482829] NET: Registered protocol family 20
[ 2.503091] pnp: 00:01: ioport range 0x800-0x85f could not be reserved
[ 2.503093] pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
[ 2.503097] pnp: 00:01: ioport range 0x860-0x8ff could not be reserved
[ 2.503104] pnp: 00:07: ioport range 0x100-0x1fe has been reserved
[ 2.503105] pnp: 00:07: ioport range 0x200-0x277 has been reserved
[ 2.503107] pnp: 00:07: ioport range 0x280-0x2e7 has been reserved
[ 2.503109] pnp: 00:07: ioport range 0x2e8-0x2ef has been reserved
[ 2.503110] pnp: 00:07: ioport range 0x2f0-0x2f7 has been reserved
[ 2.503112] pnp: 00:07: ioport range 0x2f8-0x2ff has been reserved
[ 2.503114] pnp: 00:07: ioport range 0x300-0x377 has been reserved
[ 2.503116] pnp: 00:07: ioport range 0x380-0x3bb has been reserved
[ 2.503317] PCI: Bridge: 0000:00:01.0
[ 2.503318] IO window: d000-dfff
[ 2.503321] MEM window: dc000000-dfefffff
[ 2.503324] PREFETCH window: c0000000-cfffffff
[ 2.503326] PCI: Bridge: 0000:00:1c.0
[ 2.503327] IO window: disabled.
[ 2.503331] MEM window: dbf00000-dbffffff
[ 2.503334] PREFETCH window: disabled.
[ 2.503337] PCI: Bridge: 0000:00:1c.4
[ 2.503338] IO window: disabled.
[ 2.503342] MEM window: disabled.
[ 2.503344] PREFETCH window: disabled.
[ 2.503348] PCI: Bridge: 0000:00:1e.0
[ 2.503349] IO window: disabled.
[ 2.503352] MEM window: disabled.
[ 2.503355] PREFETCH window: disabled.
[ 2.503365] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.503369] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 2.503382] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.503386] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 2.503399] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.503402] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 2.503410] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 2.503431] NET: Registered protocol family 2
[ 2.515786] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 2.515892] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 2.516290] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 2.516509] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.516511] TCP reno registered
[ 2.519922] checking if image is initramfs... it is
[ 2.954444] Freeing initrd memory: 6796k freed
[ 2.954567] Simple Boot Flag at 0x7a set to 0x1
[ 2.954898] audit: initializing netlink socket (disabled)
[ 2.954908] audit(1186662196.742:1): initialized
[ 2.954975] highmem bounce pool size: 64 pages
[ 2.955047] VFS: Disk quotas dquot_6.5.1
[ 2.955061] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.955098] io scheduler noop registered
[ 2.955100] io scheduler anticipatory registered
[ 2.955102] io scheduler deadline registered
[ 2.955110] io scheduler cfq registered (default)
[ 2.966426] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 2.966462] assign_interrupt_mode Found MSI capability
[ 2.966465] Allocate Port Service[0000:00:01.0:pcie00]
[ 2.966552] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 2.966592] assign_interrupt_mode Found MSI capability
[ 2.966594] Allocate Port Service[0000:00:1c.0:pcie00]
[ 2.966626] Allocate Port Service[0000:00:1c.0:pcie02]
[ 2.966724] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 2.966756] assign_interrupt_mode Found MSI capability
[ 2.966758] Allocate Port Service[0000:00:1c.4:pcie00]
[ 2.966781] Allocate Port Service[0000:00:1c.4:pcie02]
[ 2.966893] isapnp: Scanning for PnP cards...
[ 3.321865] isapnp: No Plug & Play device found
[ 3.336690] Real Time Clock Driver v1.12ac
[ 3.337001] hpet_resources: 0xfed00000 is busy
[ 3.337007] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 3.337399] mice: PS/2 mouse device common for all mice
[ 3.337838] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 3.337940] input: Macintosh mouse button emulation as /class/input/input0
[ 3.337966] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 3.337968] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.338147] PNP: No PS/2 controller found. Probing ports directly.
[ 3.340623] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.340714] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.340764] EISA: Probing bus 0 at eisa.0
[ 3.340771] Cannot allocate resource for EISA slot 2
[ 3.340778] Cannot allocate resource for EISA slot 5
[ 3.340780] Cannot allocate resource for EISA slot 6
[ 3.340788] EISA: Detected 0 cards.
[ 3.370797] TCP cubic registered
[ 3.370803] NET: Registered protocol family 1
[ 3.370819] Starting balanced_irq
[ 3.370826] Using IPI No-Shortcut mode
[ 3.370891] ACPI: (supports S0 S3 S4 S5)
[ 3.370921] Magic number: 3:781:379
[ 3.371099] Freeing unused kernel memory: 328k freed
[ 3.371144] Time: tsc clocksource has been installed.
[ 4.513782] Capability LSM initialized
[ 4.540918] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 4.540924] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 4.744983] usbcore: registered new interface driver usbfs
[ 4.744999] usbcore: registered new interface driver hub
[ 4.745014] usbcore: registered new device driver usb
[ 4.745543] USB Universal Host Controller Interface driver v3.0
[ 4.745573] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.745583] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 4.745585] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.745648] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 4.745671] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[ 4.745737] usb usb1: configuration #1 chosen from 1 choice
[ 4.745757] hub 1-0:1.0: USB hub found
[ 4.745762] hub 1-0:1.0: 2 ports detected
[ 4.748462] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[ 4.748464] Copyright (c) 1999-2006 Intel Corporation.
[ 4.802190] SCSI subsystem initialized
[ 4.805466] libata version 2.20 loaded.
[ 4.847409] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 4.847421] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 4.847425] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.847518] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 4.847541] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[ 4.847834] usb usb2: configuration #1 chosen from 1 choice
[ 4.847932] hub 2-0:1.0: USB hub found
[ 4.847936] hub 2-0:1.0: 2 ports detected
[ 4.949173] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 18
[ 4.949184] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 4.949188] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.949210] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 4.949239] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.949245] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 4.949253] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xdffdac00
[ 4.953150] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.953199] usb usb3: configuration #1 chosen from 1 choice
[ 4.953216] hub 3-0:1.0: USB hub found
[ 4.953220] hub 3-0:1.0: 4 ports detected
[ 5.053754] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 5.053763] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 5.053766] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.053788] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 5.053814] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.053820] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 5.053827] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xff980800
[ 5.057708] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.057752] usb usb4: configuration #1 chosen from 1 choice
[ 5.057771] hub 4-0:1.0: USB hub found
[ 5.057775] hub 4-0:1.0: 6 ports detected
[ 5.158623] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 21 (level, low) -> IRQ 20
[ 5.158632] PCI: Setting latency timer of device 0000:00:19.0 to 64
[ 5.176343] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:81:85:a9
[ 5.251495] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 5.251530] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 5.251537] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 5.251540] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.251555] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 5.251576] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000ff80
[ 5.251641] usb usb5: configuration #1 chosen from 1 choice
[ 5.251658] hub 5-0:1.0: USB hub found
[ 5.251662] hub 5-0:1.0: 2 ports detected
[ 5.352494] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 5.352502] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 5.352506] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.352525] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 5.352547] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[ 5.352631] usb usb6: configuration #1 chosen from 1 choice
[ 5.352659] hub 6-0:1.0: USB hub found
[ 5.352664] hub 6-0:1.0: 2 ports detected
[ 5.365652] usb 4-2: new high speed USB device using ehci_hcd and address 2
[ 5.453337] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
[ 5.453345] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 5.453349] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.453368] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 5.453392] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ff40
[ 5.453482] usb usb7: configuration #1 chosen from 1 choice
[ 5.453505] hub 7-0:1.0: USB hub found
[ 5.453511] hub 7-0:1.0: 2 ports detected
[ 5.554203] ata_piix 0000:00:1f.2: version 2.10ac1
[ 5.554209] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 5.554229] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 22
[ 5.554244] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 5.554286] ata1: SATA max UDMA/133 cmd 0x0001fe00 ctl 0x0001fe12 bmdma 0x0001fec0 irq 22
[ 5.554312] ata2: SATA max UDMA/133 cmd 0x0001fe20 ctl 0x0001fe32 bmdma 0x0001fec8 irq 22
[ 5.554322] scsi0 : ata_piix
[ 5.556299] usb 4-2: configuration #1 chosen from 1 choice
[ 5.903820] ata1.00: ata_hpa_resize 1: sectors = 312500000, hpa_sectors = 312500000
[ 5.903825] ata1.00: ATA-7: ST3160815AS, 3.ADA, max UDMA/133
[ 5.903828] ata1.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 5.903831] ata1.01: ATAPI, max UDMA/66
[ 5.962023] ata1.00: ata_hpa_resize 1: sectors = 312500000, hpa_sectors = 312500000
[ 5.962027] ata1.00: configured for UDMA/133
[ 6.116153] ata1.01: configured for UDMA/66
[ 6.116161] scsi1 : ata_piix
[ 6.177115] usb 7-1: new full speed USB device using uhci_hcd and address 2
[ 6.300042] ata2.00: ata_hpa_resize 1: sectors = 312500000, hpa_sectors = 312500000
[ 6.300047] ata2.00: ATA-7: ST3160815AS, 3.ADA, max UDMA/133
[ 6.300050] ata2.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 6.336964] usb 7-1: configuration #1 chosen from 1 choice
[ 6.342918] hub 7-1:1.0: USB hub found
[ 6.344887] hub 7-1:1.0: 3 ports detected
[ 6.358254] ata2.00: ata_hpa_resize 1: sectors = 312500000, hpa_sectors = 312500000
[ 6.358257] ata2.00: configured for UDMA/133
[ 6.358337] scsi 0:0:0:0: Direct-Access ATA ST3160815AS 3.AD PQ: 0 ANSI: 5
[ 6.359189] scsi 0:0:1:0: CD-ROM Optiarc DVD+-RW AD-5170S 101B PQ: 0 ANSI: 5
[ 6.371372] scsi 1:0:0:0: Direct-Access ATA ST3160815AS 3.AD PQ: 0 ANSI: 5
[ 6.382148] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
[ 6.533133] ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 20 (level, low) -> IRQ 22
[ 6.533150] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 6.533178] ata3: SATA max UDMA/133 cmd 0x0001fe40 ctl 0x0001fe52 bmdma 0x0001fed0 irq 22
[ 6.533203] ata4: SATA max UDMA/133 cmd 0x0001fe60 ctl 0x0001fe72 bmdma 0x0001fed8 irq 22
[ 6.533210] scsi2 : ata_piix
[ 6.658429] usb 7-2: new low speed USB device using uhci_hcd and address 3
[ 6.694539] ATA: abnormal status 0x7F on port 0x0001fe47
[ 6.694546] scsi3 : ata_piix
[ 6.815134] usb 7-2: configuration #1 chosen from 1 choice
[ 6.873013] SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)
[ 6.873022] sda: Write Protect is off
[ 6.873024] sda: Mode Sense: 00 3a 00 00
[ 6.873035] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.873070] SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)
[ 6.873077] sda: Write Protect is off
[ 6.873078] sda: Mode Sense: 00 3a 00 00
[ 6.873089] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.873091] sda: sda1 sda2
[ 6.891758] sd 0:0:0:0: Attached scsi disk sda
[ 6.891879] SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB)
[ 6.891890] sdb: Write Protect is off
[ 6.891892] sdb: Mode Sense: 00 3a 00 00
[ 6.891908] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.891948] SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB)
[ 6.891960] sdb: Write Protect is off
[ 6.891962] sdb: Mode Sense: 00 3a 00 00
[ 6.891977] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.891980] sdb:sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 6.897082] Uniform CD-ROM driver Revision: 3.20
[ 6.897118] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 6.913387] sdb1
[ 6.913432] sd 1:0:0:0: Attached scsi disk sdb
[ 6.917223] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.917237] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 6.917251] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 6.995769] usb 7-1.1: new full speed USB device using uhci_hcd and address 4
[ 7.120621] usb 7-1.1: configuration #1 chosen from 1 choice
[ 7.133540] usbcore: registered new interface driver libusual
[ 7.136049] usbcore: registered new interface driver hiddev
[ 7.136091] Initializing USB Mass Storage driver...
[ 7.136128] scsi4 : SCSI emulation for USB Mass Storage devices
[ 7.136159] usb-storage: device found at 2
[ 7.136161] usb-storage: waiting for device to settle before scanning
[ 7.147588] input: USB Optical Mouse as /class/input/input1
[ 7.147609] input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.2-2
[ 7.150611] input: Dell Dell USB Keyboard as /class/input/input2
[ 7.150623] input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1.1
[ 7.158529] input: Dell Dell USB Keyboard as /class/input/input3
[ 7.158539] input: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1.1
[ 7.158550] usbcore: registered new interface driver usbhid
[ 7.158552] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 7.158555] usbcore: registered new interface driver usb-storage
[ 7.158557] USB Mass Storage support registered.
[ 7.176413] Attempting manual resume
[ 7.176416] swsusp: Resume From Partition 8:1
[ 7.176417] PM: Checking swsusp image.
[ 7.176519] PM: Resume from disk failed.
[ 7.202002] kjournald starting. Commit interval 5 seconds
[ 7.202010] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.133693] usb-storage: device scan complete
[ 12.137936] scsi 4:0:0:0: Direct-Access TEAC USB HS-CF Card 4.00 PQ: 0 ANSI: 0
[ 12.141928] scsi 4:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.00 PQ: 0 ANSI: 0
[ 12.145922] scsi 4:0:0:2: Direct-Access TEAC USB HS-MS Card 4.00 PQ: 0 ANSI: 0
[ 12.149156] scsi 4:0:0:3: Direct-Access TEAC USB HS-SD Card 4.00 PQ: 0 ANSI: 0
[ 12.153290] sd 4:0:0:0: Attached scsi removable disk sdc
[ 12.153316] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 12.158165] sd 4:0:0:1: Attached scsi removable disk sdd
[ 12.158196] sd 4:0:0:1: Attached scsi generic sg4 type 0
[ 12.162654] sd 4:0:0:2: Attached scsi removable disk sde
[ 12.162685] sd 4:0:0:2: Attached scsi generic sg5 type 0
[ 12.213527] sd 4:0:0:3: Attached scsi removable disk sdf
[ 12.213551] sd 4:0:0:3: Attached scsi generic sg6 type 0
[ 14.413112] e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt Error: -22
[ 14.414480] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
[ 14.414482] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[ 14.980349] Linux agpgart interface v0.102 (c) Dave Jones
[ 15.011153] agpgart: Detected an Intel 965G Chipset.
[ 15.024620] agpgart: AGP aperture is 256M @ 0x0
[ 15.042152] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.043282] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.095378] iTCO_vendor_support: vendor-support=0
[ 15.142121] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 15.142170] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 15.142176] iTCO_wdt: No card detected
[ 15.324375] input: PC Speaker as /class/input/input4
[ 15.430543] usbcore: registered new interface driver xpad
[ 15.430547] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
[ 15.458198] nvidia: module license 'NVIDIA' taints kernel.
[ 15.636709] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.636720] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 15.697878] NET: Registered protocol family 17
[ 15.762841] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.762848] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 15.762997] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007
[ 15.971311] fuse init (API version 7.8)
[ 16.026155] lp: driver loaded but no devices found
[ 16.046563] Adding 8000328k swap on /dev/disk/by-uuid/798fd118-bd2e-4520-b640-3d987cde4efd. Priority:-1 extents:1 across:8000328k
[ 16.148214] EXT3 FS on sda2, internal journal
[ 16.315507] kjournald starting. Commit interval 5 seconds
[ 16.315698] EXT3 FS on sdb1, internal journal
[ 16.315703] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.513297] NET: Registered protocol family 10
[ 16.513370] lo: Disabled Privacy Extensions
[ 21.306418] Using specific hotkey driver
[ 21.322091] input: Power Button (FF) as /class/input/input5
[ 21.322181] ACPI: Power Button (FF) [PWRF]
[ 21.322708] input: Power Button (CM) as /class/input/input6
[ 21.322796] ACPI: Power Button (CM) [VBTN]
[ 21.525776] ibm_acpi: ec object not found
[ 21.567727] No dock devices found.
[ 21.612061] pcc_acpi: loading...
[ 29.129936] ppdev: user-space parallel port driver
[ 29.629332] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 29.629527] apm: disabled - APM is not SMP safe.
[ 29.939298] Bluetooth: Core ver 2.11
[ 29.939338] NET: Registered protocol family 31
[ 29.939340] Bluetooth: HCI device and connection manager initialized
[ 29.939342] Bluetooth: HCI socket layer initialized
[ 29.958733] Bluetooth: L2CAP ver 2.8
[ 29.958735] Bluetooth: L2CAP socket layer initialized
[ 30.072071] Bluetooth: RFCOMM socket layer initialized
[ 30.072077] Bluetooth: RFCOMM TTY layer initialized
[ 30.072079] Bluetooth: RFCOMM ver 1.8
The same thing seems to happen with generic version of the kernel, as
far as I can remember (I will check if it's needed).
** Affects: linux-meta (Ubuntu)
Importance: Undecided
Status: New
--
dell dimension 9200 - shutdown doesn't work
https://bugs.launchpad.net/bugs/131292
You received this bug notification because you are a member of Kernel
Bugs, which is a bug contact for linux-meta in ubuntu.
More information about the kernel-bugs
mailing list