[Bug 57502] Re: JMicron PATA/SATA Controller does not work

[kaz]

I tried to install edgy with the 20061017.1 i368 alternate, and it
actually found both my DVD drive (connected to the JMicron 363) and my
harddisk (connected to the ICH8R), so that I could install ubuntu.

However, the installed system freezes directly after boot. It tries to
initialize the Jmicron controller, but throws a few errors:

PCI: JMB36x: Enabling dual function on 0000:02:00.0
PCI: Cannot allocate resource region 0 of device 0000:02:00.0
PCI: Cannot allocate resource region 1 of device 0000:02:00.0
PCI: Cannot allocate resource region 2 of device 0000:02:00.0
PCI: Cannot allocate resource region 3 of device 0000:02:00.0
PCI: Error while updating region 0000:02:00.0/0 (0000d000 != 00000000)
PCI: Error while updating regiopn 0000:02:00.0/2 (0000d008 != 00000000)

and then freezes completely without any further messages. Thus, the
linux partition on the harddrive is still unuseable.

So if the problems really are fixed, I guess the working kernel has not
yet been included in the dalies. Is the any difference between the daily
boot kernel (which works with the DVD drive) and the kernel for
installations (which obviously must be configures differently)?

-- 
JMicron PATA/SATA Controller does not work
https://launchpad.net/bugs/57502