[Bug 34708] Network is not working

Matej Kovacic matej.kovacic at fdv.uni-lj.si
Sat May 20 12:14:09 UTC 2006 

Public bug reported:

I reported this error before, but here I have new information. My
network cards are not working uder Dapper. Fetw days ago, I wrote, that
network was working during install, but it is not true - network cards
are not working at all. Under Breezy everything works fine.

Here is my dmesg listing:

[4294667.296000] Linux version 2.6.15-17-386 (buildd at rothera) (gcc version 4.0.3 20060304 (prerelease) (Ubuntu 4.0.2-10ubuntu1)) #1 PREEMPT Tue Mar 7 01:47:22 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 000000003f7e4000 (usable)
[4294667.296000]  BIOS-e820: 000000003f7e4000 - 0000000040000000 (reserved)
[4294667.296000]  BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[4294667.296000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 1015MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000fe700
[4294667.296000] On node 0 totalpages: 260068
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:0
[4294667.296000]   DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000]   Normal zone: 255972 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 COMPAQ                                ) @ 0x000e9c10
[4294667.296000] ACPI: RSDT (v001 COMPAQ CPQ0968  0x20050405  0x00000000) @ 0x3f7f4040
[4294667.296000] ACPI: FADT (v001 COMPAQ GRANTSD  0x00000001  0x00000000) @ 0x3f7f40ec
[4294667.296000] ACPI: SSDT (v001 COMPAQ  PROJECT 0x00000001 MSFT 0x0100000e) @ 0x3f7f565a
[4294667.296000] ACPI: MADT (v001 COMPAQ GRANTSD  0x00000001  0x00000000) @ 0x3f7f4160
[4294667.296000] ACPI: ASF! (v032 COMPAQ GRANTSD  0x00000001  0x00000000) @ 0x3f7f41c8
[4294667.296000] ACPI: MCFG (v001 COMPAQ GRANTSD  0x00000001  0x00000000) @ 0x3f7f422b
[4294667.296000] ACPI: DSDT (v001 COMPAQ     DSDT 0x00000001 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0xf808
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:4 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[4294667.296000] Processor #1 15:4 APIC version 20
[4294667.296000] WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:90000000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/sda4 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 3191.670 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294670.908000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294670.909000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294670.923000] Memory: 1020996k/1040272k available (1964k kernel code, 18576k reserved, 598k data, 284k init, 0k highmem)
[4294670.923000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294670.983000] Calibrating delay using timer specific routine.. 6384.27 BogoMIPS (lpj=3192139)
[4294670.983000] Security Framework v1.0.0 initialized
[4294670.983000] SELinux:  Disabled at boot.
[4294670.983000] Mount-cache hash table entries: 512
[4294670.983000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[4294670.983000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[4294670.983000] monitor/mwait feature present.
[4294670.983000] using mwait in idle threads.
[4294670.983000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[4294670.983000] CPU: L2 cache: 1024K
[4294670.983000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000441d 00000000 00000000
[4294670.983000] mtrr: v2.0 (20020519)
[4294670.983000] CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
[4294670.983000] Enabling fast FPU save and restore... done.
[4294670.983000] Enabling unmasked SIMD FPU exception support... done.
[4294670.983000] Checking 'hlt' instruction... OK.
[4294670.987000] checking if image is initramfs... it is
[4294671.447000] Freeing initrd memory: 6339k freed
[4294671.451000] ACPI: Looking for DSDT ... not found!
[4294671.454000] ENABLING IO-APIC IRQs
[4294671.454000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294671.565000] HP Laptop series board detected. Selecting BIOS-method for reboots.
[4294671.565000] NET: Registered protocol family 16
[4294671.565000] EISA bus registered
[4294671.565000] ACPI: bus type pci registered
[4294671.567000] PCI: PCI BIOS revision 2.20 entry at 0xec3b7, last bus=64
[4294671.567000] PCI: Using MMCONFIG
[4294671.567000] ACPI: Subsystem revision 20051216
[4294671.568000] ACPI: Interpreter enabled
[4294671.568000] ACPI: Using IOAPIC for interrupt routing
[4294671.569000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.569000] PCI: Probing PCI hardware (bus 00)
[4294671.569000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294671.570000] Boot video device is 0000:00:02.0
[4294671.571000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[4294671.571000] PCI: Transparent bridge - 0000:00:1e.0
[4294671.571000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294671.582000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
[4294671.582000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT]
[4294671.583000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[4294671.586000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
[4294671.586000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
[4294671.586000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
[4294671.586000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[4294671.587000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15)
[4294671.587000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15)
[4294671.587000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
[4294671.587000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[4294671.587000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294671.587000] pnp: PnP ACPI init
[4294671.588000] pnp: PnPACPI: unknown resource type 7
[4294671.588000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04
[4294671.588000] pnp: PnPACPI: unknown resource type 7
[4294671.588000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200
[4294671.588000] pnp: PnPACPI: unknown resource type 7
[4294671.588000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00
[4294671.588000] pnp: PnPACPI: unknown resource type 7
[4294671.588000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800
[4294671.588000] pnp: PnPACPI: unknown resource type 7
[4294671.588000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0f13
[4294671.588000] pnp: PnPACPI: unknown resource type 7
[4294671.588000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0303
[4294671.588000] pnp: PnPACPI: unknown resource type 7
[4294671.588000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0401
[4294671.589000] pnp: PnPACPI: unknown resource type 7
[4294671.589000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0501
[4294671.589000] pnp: PnPACPI: unknown resource type 7
[4294671.589000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0700
[4294671.589000] pnp: PnPACPI: unknown resource type 7
[4294671.589000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0003
[4294671.589000] pnp: PnPACPI: unknown resource type 7
[4294671.589000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294671.589000] pnp: PnPACPI: unknown resource type 7
[4294671.589000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294671.589000] pnp: PnPACPI: unknown resource type 7
[4294671.589000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294671.590000] pnp: PnPACPI: unknown resource type 7
[4294671.590000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
[4294671.590000] pnp: PnP ACPI: found 1 devices
[4294671.590000] PnPBIOS: Disabled by ACPI PNP
[4294671.590000] PCI: Using ACPI for IRQ routing
[4294671.590000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294672.025000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[4294672.025000] PCI: Bridge: 0000:00:1c.0
[4294672.025000]   IO window: disabled.
[4294672.025000]   MEM window: disabled.
[4294672.025000]   PREFETCH window: disabled.
[4294672.025000] PCI: Bridge: 0000:00:1c.1
[4294672.025000]   IO window: disabled.
[4294672.025000]   MEM window: f0200000-f04fffff
[4294672.025000]   PREFETCH window: disabled.
[4294672.025000] PCI: Bridge: 0000:00:1e.0
[4294672.025000]   IO window: 1000-1fff
[4294672.025000]   MEM window: f0500000-f07fffff
[4294672.025000]   PREFETCH window: disabled.
[4294672.025000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294672.025000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 169
[4294672.025000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[4294672.025000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294672.025000] audit: initializing netlink socket (disabled)
[4294672.025000] audit(1142001825.024:1): initialized
[4294672.025000] VFS: Disk quotas dquot_6.5.1
[4294672.025000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294672.026000] Initializing Cryptographic API
[4294672.026000] io scheduler noop registered
[4294672.026000] io scheduler anticipatory registered
[4294672.026000] io scheduler deadline registered
[4294672.026000] io scheduler cfq registered
[4294672.026000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294672.026000] pcie_portdrv_probe->Dev[2660:8086] has invalid IRQ. Check vendor BIOS
[4294672.026000] assign_interrupt_mode Found MSI capability
[4294672.026000] Allocate Port Service[pcie00]
[4294672.026000] Allocate Port Service[pcie02]
[4294672.026000] Allocate Port Service[pcie03]
[4294672.026000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 169
[4294672.026000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[4294672.026000] assign_interrupt_mode Found MSI capability
[4294672.026000] Allocate Port Service[pcie00]
[4294672.026000] Allocate Port Service[pcie02]
[4294672.026000] Allocate Port Service[pcie03]
[4294672.026000] isapnp: Scanning for PnP cards...
[4294672.381000] isapnp: No Plug & Play device found
[4294672.397000] PNP: No PS/2 controller found. Probing ports directly.
[4294672.399000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294672.399000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294672.399000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[4294672.399000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.400000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294672.400000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294672.400000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294672.400000] ACPI: bus type ide registered
[4294672.400000] mice: PS/2 mouse device common for all mice
[4294672.400000] EISA: Probing bus 0 at eisa.0
[4294672.400000] Cannot allocate resource for EISA slot 1
[4294672.400000] Cannot allocate resource for EISA slot 3
[4294672.400000] EISA: Detected 0 cards.
[4294672.400000] NET: Registered protocol family 2
[4294672.409000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294672.409000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[4294672.409000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294672.409000] TCP: Hash tables configured (established 131072 bind 65536)
[4294672.409000] TCP reno registered
[4294672.409000] TCP bic registered
[4294672.409000] NET: Registered protocol family 1
[4294672.409000] NET: Registered protocol family 8
[4294672.409000] NET: Registered protocol family 20
[4294672.409000] Using IPI Shortcut mode
[4294672.409000] ACPI wakeup devices: 
[4294672.409000] PCI0 PEG1 PCX1 PCX2 PCX4  HUB COM1 USB1 USB2 USB3 USB4 EUSB PBTN 
[4294672.409000] ACPI: (supports S0 S1 S3 S4 S5)
[4294672.409000] Freeing unused kernel memory: 284k freed
[4294672.461000] vga16fb: initializing
[4294672.461000] vga16fb: mapped to 0x800a0000
[4294672.562000] Console: switching to colour frame buffer device 80x25
[4294672.562000] fb0: VGA16 VGA frame buffer device
[4294673.683000] Capability LSM initialized
[4294673.708000] ACPI: Processor [CPU0] (supports 8 throttling states)
[4294673.980000] SCSI subsystem initialized
[4294673.981000] libata version 1.20 loaded.
[4294673.982000] ata_piix 0000:00:1f.2: version 1.05
[4294673.982000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 201
[4294673.982000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294673.982000] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x34F0 irq 14
[4294674.136000] ata1: dev 0 cfg 49:2f00 82:3069 83:7d01 84:4023 85:3069 86:3401 87:4023 88:203f
[4294674.136000] ata1: dev 0 ATA-7, max UDMA/100, 312581808 sectors: LBA48
[4294674.136000] ata1: dev 0 configured for UDMA/100
[4294674.136000] scsi0 : ata_piix
[4294674.136000]   Vendor: ATA       Model: ST3160023AS       Rev: 3.43
[4294674.136000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[4294674.136000] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x34F8 irq 15
[4294674.457000] ata2: dev 0 cfg 49:0f00 82:0210 83:4010 84:4000 85:0210 86:0000 87:4000 88:080f
[4294674.457000] ata2: dev 0 ATAPI, max UDMA/44
[4294674.457000] ata2(0): applying bridge limits
[4294674.460000] ata2: dev 1 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:107f
[4294674.460000] ata2: dev 1 ATA-7, max UDMA/133, 240121728 sectors: LBA
[4294674.460000] ata2(0): applying bridge limits
[4294674.460000] ata2: dev 0 configured for UDMA/44
[4294674.460000] ata2: dev 1 configured for UDMA/44
[4294674.460000] scsi1 : ata_piix
[4294674.462000]   Vendor: HL-DT-ST  Model: DVDRRW GWA-4166B  Rev: 1.03
[4294674.462000]   Type:   CD-ROM                             ANSI SCSI revision: 05
[4294674.462000]   Vendor: ATA       Model: Maxtor 6Y120P0    Rev: YAR4
[4294674.462000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[4294674.483000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[4294674.483000] SCSI device sda: drive cache: write back
[4294674.486000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[4294674.486000] SCSI device sda: drive cache: write back
[4294674.486000]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[4294674.527000] sd 0:0:0:0: Attached scsi disk sda
[4294674.527000] SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB)
[4294674.533000] SCSI device sdb: drive cache: write back
[4294674.535000] SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB)
[4294674.536000] SCSI device sdb: drive cache: write back
[4294674.536000]  sdb: sdb1 sdb2
[4294674.537000] sd 1:0:1:0: Attached scsi disk sdb
[4294674.832000] usbcore: registered new driver usbfs
[4294674.832000] usbcore: registered new driver hub
[4294674.833000] USB Universal Host Controller Interface driver v2.3
[4294674.833000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 209
[4294674.833000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294674.833000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294674.833000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294674.833000] uhci_hcd 0000:00:1d.0: irq 209, io base 0x00003440
[4294674.833000] hub 1-0:1.0: USB hub found
[4294674.833000] hub 1-0:1.0: 2 ports detected
[4294674.935000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 18 (level, low) -> IRQ 217
[4294674.935000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294674.935000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294674.935000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294674.935000] uhci_hcd 0000:00:1d.1: irq 217, io base 0x00003460
[4294674.935000] hub 2-0:1.0: USB hub found
[4294674.935000] hub 2-0:1.0: 2 ports detected
[4294675.036000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 225
[4294675.036000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294675.036000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294675.036000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294675.036000] uhci_hcd 0000:00:1d.2: irq 225, io base 0x00003480
[4294675.036000] hub 3-0:1.0: USB hub found
[4294675.036000] hub 3-0:1.0: 2 ports detected
[4294675.137000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 233
[4294675.137000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294675.137000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294675.137000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294675.137000] uhci_hcd 0000:00:1d.3: irq 233, io base 0x000034a0
[4294675.137000] hub 4-0:1.0: USB hub found
[4294675.137000] hub 4-0:1.0: 2 ports detected
[4294675.141000] usb 1-1: new low speed USB device using uhci_hcd and address 2
[4294675.239000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 209
[4294675.239000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294675.239000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294675.239000] ehci_hcd 0000:00:1d.7: debug port 1
[4294675.239000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[4294675.240000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294675.240000] ehci_hcd 0000:00:1d.7: irq 209, io mem 0xcfdc0000
[4294675.243000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294675.244000] hub 5-0:1.0: USB hub found
[4294675.244000] hub 5-0:1.0: 8 ports detected
[4294675.458000] Attempting manual resume
[4294675.482000] EXT3-fs: mounted filesystem with ordered data mode.
[4294675.495000] kjournald starting.  Commit interval 5 seconds
[4294675.657000] usb 1-1: device not accepting address 2, error -71
[4294676.379000] usb 1-1: new low speed USB device using uhci_hcd and address 4
[4294676.748000] usb 1-2: new low speed USB device using uhci_hcd and address 5
[4294680.933000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294680.933000]  1:0:0:0: Attached scsi generic sg1 type 5
[4294680.933000] sd 1:0:1:0: Attached scsi generic sg2 type 0
[4294680.988000] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[4294680.988000] Uniform CD-ROM driver Revision: 3.20
[4294680.988000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[4294681.785000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294681.787000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294681.845000] Linux agpgart interface v0.101 (c) Dave Jones
[4294681.847000] agpgart: Detected an Intel 915G Chipset.
[4294681.847000] agpgart: Detected 7932K stolen memory.
[4294681.864000] agpgart: AGP aperture is 256M @ 0xe0000000
[4294682.053000] tg3.c:v3.47 (Dec 28, 2005)
[4294682.053000] ACPI: PCI Interrupt 0000:40:00.0[A] -> GSI 17 (level, low) -> IRQ 169
[4294682.053000] PCI: Setting latency timer of device 0000:40:00.0 to 64
[4294682.076000] eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:0f:fe:38:af:cc
[4294682.076000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
[4294682.076000] eth0: dma_rwctrl[76180000]
[4294682.214000] hw_random hardware driver 1.0.0 loaded
[4294682.219000] usbcore: registered new driver hiddev
[4294682.240000] input: Logitech Optical USB Mouse as /class/input/input0
[4294682.240000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1
[4294682.262000] input: CHICONY HP Basic USB Keyboard as /class/input/input1
[4294682.262000] input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-2
[4294682.262000] usbcore: registered new driver usbhid
[4294682.262000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294682.431000] ts: Compaq touchscreen protocol output
[4294682.587000] 8139too Fast Ethernet driver 0.9.27
[4294682.588000] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 50
[4294682.589000] eth1: RealTek RTL8139 at 0xc018a000, 00:40:f4:ce:46:5f, IRQ 50
[4294682.589000] eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
[4294682.625000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294682.845000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 225
[4294682.845000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[4294682.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294683.156000] intel8x0_measure_ac97_clock: measured 50180 usecs
[4294683.156000] intel8x0: clocking to 48000
[4294683.428000] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
[4294683.428000] parport0: irq 7 detected
[4294683.510000] lp0: using parport0 (polling).
[4294683.571000] Adding 1951856k swap on /dev/sda6.  Priority:-1 extents:1 across:1951856k
[4294683.654000] EXT3 FS on sda4, internal journal
[4294683.758000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294683.758000] md: bitmap version 4.39
[4294684.131000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
[4294684.671000] cdrom: open failed.
[4294685.243000] kjournald starting.  Commit interval 5 seconds
[4294685.243000] EXT3 FS on sda2, internal journal
[4294685.243000] EXT3-fs: mounted filesystem with ordered data mode.
[4294685.244000] kjournald starting.  Commit interval 5 seconds
[4294685.245000] EXT3 FS on sda7, internal journal
[4294685.245000] EXT3-fs: mounted filesystem with ordered data mode.
[4294685.287000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[4294685.329000] NTFS volume version 3.1.
[4294685.404000] NTFS volume version 3.1.
[4294687.325000] ACPI: Power Button (FF) [PWRF]
[4294687.326000] ACPI: Power Button (CM) [PBTN]
[4294687.395000] ibm_acpi: ec object not found
[4294687.440000] wmi_add device=b7f4c800
[4294687.440000] calling WQBA
[4294690.294000] [drm] Initialized drm 1.0.0 20040925
[4294690.296000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 50
[4294690.297000] [drm] Initialized i915 1.1.0 20040405 on minor 0: 
[4294690.298000] mtrr: base(0xe0020000) is not aligned on a size(0x800000) boundary
[4294691.436000] apm: BIOS not found.
[4294693.840000] Bluetooth: Core ver 2.8
[4294693.840000] NET: Registered protocol family 31
[4294693.840000] Bluetooth: HCI device and connection manager initialized
[4294693.840000] Bluetooth: HCI socket layer initialized
[4294693.881000] Bluetooth: L2CAP ver 2.8
[4294693.881000] Bluetooth: L2CAP socket layer initialized
[4294693.883000] Bluetooth: RFCOMM socket layer initialized
[4294693.883000] Bluetooth: RFCOMM TTY layer initialized
[4294693.883000] Bluetooth: RFCOMM ver 1.7
[4294694.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294694.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294694.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294694.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294694.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294694.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294694.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294694.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294706.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294706.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294706.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294706.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294706.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294706.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294706.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294706.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294718.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294718.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294718.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294718.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294718.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294718.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294718.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294718.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294730.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294730.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294730.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294730.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294730.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294730.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294730.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294730.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294742.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294742.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294742.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294742.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294742.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294742.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294742.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294742.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294754.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294754.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294754.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294754.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294754.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294754.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294754.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294754.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294766.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294766.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294766.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294766.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294766.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294766.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294766.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294766.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294778.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294778.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294778.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294778.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294778.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294778.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294778.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294778.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294789.911000] NET: Registered protocol family 10
[4294789.912000] lo: Disabled Privacy Extensions
[4294789.912000] IPv6 over IPv4 tunneling driver
[4294790.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294790.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294790.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294790.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294790.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294790.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294790.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294790.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294800.879000] eth1: no IPv6 routers present
[4294802.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294802.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294802.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294802.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294802.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294802.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294802.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294802.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294814.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294814.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294814.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294814.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294814.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294814.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294814.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294814.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294826.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294826.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294826.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294826.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294826.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294826.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294826.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294826.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294838.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294838.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294838.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294838.854000] eth1:  Tx descriptor 0 is 0008005a. (queue head)
[4294838.854000] eth1:  Tx descriptor 1 is 0008004e.
[4294838.854000] eth1:  Tx descriptor 2 is 00080046.
[4294838.854000] eth1:  Tx descriptor 3 is 00080046.
[4294838.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294922.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294922.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294922.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294922.854000] eth1:  Tx descriptor 0 is 0008005a. (queue head)
[4294922.854000] eth1:  Tx descriptor 1 is 00080046.
[4294922.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294922.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294922.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294934.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294934.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294934.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294934.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294934.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294934.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294934.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294934.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294946.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294946.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294946.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294946.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294946.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294946.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294946.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294946.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294958.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294958.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294958.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294958.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294958.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294958.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294958.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294958.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294970.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294970.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294970.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294970.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294970.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294970.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294970.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294970.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294982.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294982.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294982.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294982.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294982.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294982.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294982.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294982.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294994.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294994.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294994.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4294994.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4294994.854000] eth1:  Tx descriptor 1 is 0008003c.
[4294994.854000] eth1:  Tx descriptor 2 is 0008003c.
[4294994.854000] eth1:  Tx descriptor 3 is 0008003c.
[4294994.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295004.450000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4295006.074000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[4295006.074000] tg3: eth0: Flow control is on for TX and on for RX.
[4295006.074000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[4295006.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295006.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295006.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4295006.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4295006.854000] eth1:  Tx descriptor 1 is 0008003c.
[4295006.854000] eth1:  Tx descriptor 2 is 0008003c.
[4295006.854000] eth1:  Tx descriptor 3 is 0008003c.
[4295006.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295016.611000] eth0: no IPv6 routers present
[4295018.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295018.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295018.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4295018.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4295018.854000] eth1:  Tx descriptor 1 is 0008003c.
[4295018.854000] eth1:  Tx descriptor 2 is 0008003c.
[4295018.854000] eth1:  Tx descriptor 3 is 0008003c.
[4295018.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295030.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295030.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295030.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4295030.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4295030.854000] eth1:  Tx descriptor 1 is 0008003c.
[4295030.854000] eth1:  Tx descriptor 2 is 0008003c.
[4295030.854000] eth1:  Tx descriptor 3 is 0008003c.
[4295030.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295042.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295042.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295042.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4295042.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4295042.854000] eth1:  Tx descriptor 1 is 0008003c.
[4295042.854000] eth1:  Tx descriptor 2 is 0008003c.
[4295042.854000] eth1:  Tx descriptor 3 is 0008003c.
[4295042.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295054.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295054.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295054.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4295054.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4295054.854000] eth1:  Tx descriptor 1 is 0008003c.
[4295054.854000] eth1:  Tx descriptor 2 is 0008003c.
[4295054.854000] eth1:  Tx descriptor 3 is 0008003c.
[4295054.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295066.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295066.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295066.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4295066.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4295066.854000] eth1:  Tx descriptor 1 is 0008003c.
[4295066.854000] eth1:  Tx descriptor 2 is 0008003c.
[4295066.854000] eth1:  Tx descriptor 3 is 0008003c.
[4295066.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295078.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295078.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295078.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4295078.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4295078.854000] eth1:  Tx descriptor 1 is 0008003c.
[4295078.854000] eth1:  Tx descriptor 2 is 0008003c.
[4295078.854000] eth1:  Tx descriptor 3 is 0008003c.
[4295078.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295090.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295090.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295090.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4295090.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4295090.854000] eth1:  Tx descriptor 1 is 0008003c.
[4295090.854000] eth1:  Tx descriptor 2 is 0008003c.
[4295090.854000] eth1:  Tx descriptor 3 is 0008003c.
[4295090.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295102.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295102.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295102.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4295102.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4295102.854000] eth1:  Tx descriptor 1 is 0008003c.
[4295102.854000] eth1:  Tx descriptor 2 is 0008003c.
[4295102.854000] eth1:  Tx descriptor 3 is 0008003c.
[4295102.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295114.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295114.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295114.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4295114.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4295114.854000] eth1:  Tx descriptor 1 is 0008003c.
[4295114.854000] eth1:  Tx descriptor 2 is 0008003c.
[4295114.854000] eth1:  Tx descriptor 3 is 0008003c.
[4295114.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295119.154000] usb 5-7: new high speed USB device using ehci_hcd and address 4
[4295119.347000] Initializing USB Mass Storage driver...
[4295119.347000] scsi2 : SCSI emulation for USB Mass Storage devices
[4295119.347000] usb-storage: device found at 4
[4295119.347000] usb-storage: waiting for device to settle before scanning
[4295119.347000] usbcore: registered new driver usb-storage
[4295119.348000] USB Mass Storage support registered.
[4295124.348000]   Vendor:           Model: USB DISK 2.0      Rev: 1.0B
[4295124.348000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[4295124.349000] SCSI device sdc: 507904 512-byte hdwr sectors (260 MB)
[4295124.349000] sdc: Write Protect is off
[4295124.349000] sdc: Mode Sense: 03 00 00 00
[4295124.349000] sdc: assuming drive cache: write through
[4295124.352000] SCSI device sdc: 507904 512-byte hdwr sectors (260 MB)
[4295124.352000] sdc: Write Protect is off
[4295124.352000] sdc: Mode Sense: 03 00 00 00
[4295124.352000] sdc: assuming drive cache: write through
[4295124.352000]  sdc: sdc1
[4295124.353000] sd 2:0:0:0: Attached scsi removable disk sdc
[4295124.354000] sd 2:0:0:0: Attached scsi generic sg3 type 0
[4295124.354000] usb-storage: device scan complete
[4295124.796000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[4295126.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295126.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295126.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4295126.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4295126.854000] eth1:  Tx descriptor 1 is 0008003c.
[4295126.854000] eth1:  Tx descriptor 2 is 0008003c.
[4295126.854000] eth1:  Tx descriptor 3 is 0008003c.
[4295126.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295138.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295138.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295138.854000] eth1: Tx queue start entry 4  dirty entry 0.
[4295138.854000] eth1:  Tx descriptor 0 is 0008003c. (queue head)
[4295138.854000] eth1:  Tx descriptor 1 is 0008003c.
[4295138.854000] eth1:  Tx descriptor 2 is 0008003c.
[4295138.854000] eth1:  Tx descriptor 3 is 0008003c.
[4295138.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1


And lspci:

0000:00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor to I/O Controller (rev 04)
0000:00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller (rev 04)
0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
0000:00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
0000:00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
0000:05:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:40:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)


ifconfig listing:

eth0      Link encap:Ethernet  HWaddr **:**:**:**:**:**
          inet addr:10.0.0.**  Bcast:10.255.255.255  Mask:255.0.0.0
          inet6 addr: **********/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:349 errors:0 dropped:0 overruns:0 frame:0
          TX packets:62 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:33326 (32.5 KiB)  TX bytes:4291 (4.1 KiB)
          Interrupt:169 

eth1      Link encap:Ethernet  HWaddr 00:**:**:**:**:**  
          inet addr:193.2.***.***  Bcast:193.2.***.***  Mask:255.255.255.0
          inet6 addr: *********/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:50 Base address:0xa000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:119 errors:0 dropped:0 overruns:0 frame:0
          TX packets:119 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:10367 (10.1 KiB)  TX bytes:10367 (10.1 KiB)

Hope this helps.

** Affects: linux-source-2.6.15 (Ubuntu)
       Severity: Normal
       Priority: (none set)
         Status: Needs Info

-- 
Network is not working
https://launchpad.net/bugs/34708

More information about the kernel-bugs mailing list