[Bug 43082] ACPI broken on Fujitsu-Siemens (was working)

Tue May 9 01:29:19 UTC 2006

Public bug reported:

Affects: linux-source-2.6.15 (Ubuntu)
       Severity: Normal
       Priority: (none set)
         Status: Unconfirmed

Description:
After connecting the powercord to the laptop, the battery monitor
correctly detects the transition and shows the current charge. However,
it then no longer updates and it seems that the battery is never being
charged. The battery charge light (hardware) of the laptop continues
blinking for hours without ever reaching a full charge. If I then
shutdown the laptop, after a couple of hours the battery is fully
charged and the light stops blinking.

In certain conditions, that I haven't been able to pinpoint, the battery
indicator updates and then it stops again without charging.

Up until the beginning of May, the ACPI support worked like a charm.

The messages regarding ACPI that I find with dmesg are as follows:

[4294667.296000]  BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
[4294667.296000]  BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
[4294667.296000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f8ea0
[4294667.296000] ACPI: RSDT (v001 A M I  OEMRSDT  0x09000530 MSFT 0x00000097) @ 0x3ffd0000
[4294667.296000] ACPI: FADT (v002 A M I  OEMFACP  0x09000530 MSFT 0x00000097) @ 0x3ffd0200
[4294667.296000] ACPI: MADT (v001 A M I  OEMAPIC  0x09000530 MSFT 0x00000097) @ 0x3ffd0390
[4294667.296000] ACPI: MCFG (v001 A M I  OEMMCFG  0x09000530 MSFT 0x00000097) @ 0x3ffd03f0
[4294667.296000] ACPI: OEMB (v001 A M I  AMI_OEM  0x09000530 MSFT 0x00000097) @ 0x3ffde040
[4294667.296000] ACPI: MCFG (v001 A M I  OEMMCFG  0x09000530 MSFT 0x00000097) @ 0x3ffd4820
[4294667.296000] ACPI: SSDT (v001   AMI0   CPU1PM 0x00000001 INTL 0x02002026) @ 0x3ffd4860
[4294667.296000] ACPI: DSDT (v001 UW____ F21_____ 0x00000000 INTL 0x02002026) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x808
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294671.483000] ACPI: Looking for DSDT ... not found!
[4294671.608000] ACPI: bus type pci registered
[4294671.608000] ACPI: 2 duplicate MCFG table ignored.
[4294671.608000] ACPI: Subsystem revision 20051216
[4294671.612000] ACPI: Interpreter enabled
[4294671.612000] ACPI: Using IOAPIC for interrupt routing
[4294671.612000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.614000] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[4294671.614000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294671.626000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[4294671.627000] ACPI: Embedded Controller [EC0] (gpe 24) interrupt mode.
[4294671.685000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[4294671.686000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294671.686000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294671.686000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[4294671.686000] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[4294671.686000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294671.687000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[4294671.687000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294671.687000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294671.687000] pnp: PnP ACPI init
[4294671.689000] pnp: PnP ACPI: found 12 devices
[4294671.689000] PnPBIOS: Disabled by ACPI PNP
[4294671.689000] PCI: Using ACPI for IRQ routing
[4294671.694000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294671.694000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294671.695000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294671.695000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294672.089000] ACPI wakeup devices: 
[4294672.089000] ACPI: (supports S0 S3 S4 S5)
[4294673.469000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294673.469000] ACPI: Processor [CPU1] (supports 8 throttling states)
[4294673.476000] ACPI: Thermal Zone [THRM] (66 C)
[4294673.906000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 201
[4294673.906000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[4294673.908000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 201
[4294674.066000]     ACPI-0517: *** Error: Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node dffe7ee0), AE_AML_OPERAND_VALUE
[4294674.066000]     ACPI-0517: *** Error: Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node dffe7420), AE_AML_OPERAND_VALUE
[4294674.394000]     ACPI-0517: *** Error: Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node dffe7ee0), AE_AML_OPERAND_VALUE
[4294674.394000]     ACPI-0517: *** Error: Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node dffe72e0), AE_AML_OPERAND_VALUE
[4294674.971000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209
[4294675.074000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201
[4294675.175000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
[4294675.277000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[4294675.381000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 209
[4294685.164000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294685.774000] ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 18 (level, low) -> IRQ 217
[4294685.859000] ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 19 (level, low) -> IRQ 201
[4294686.041000] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 225
[4294697.815000] ACPI: AC Adapter [AC0] (off-line)
[4294697.851000] ACPI: Battery Slot [BAT0] (battery present)
[4294697.924000] ACPI: Power Button (FF) [PWRF]
[4294697.924000] ACPI: Lid Switch [LID]
[4294697.924000] ACPI: Sleep Button (CM) [SLPB]
[4294697.924000] ACPI: Power Button (CM) [PWRB]
[4294698.096000] ACPI: Video Device [PEG] (multi-head: yes  rom: no  post: no)
[4294704.482000] apm: overridden by ACPI.
[4294710.012000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169

I'm using a Fujitsu Siemens M1451G with the latest update of Kubuntu
Dapper.

-- 
ACPI broken on Fujitsu-Siemens (was working)
https://launchpad.net/bugs/43082