[Bug 31293] Re: [Bug 31293] Re: My laptop doesn't resume from S3 ACPI sleep state.

[pedromj]

I think it's the hard drive because it doesn't do anything after the
"echo mem > /sys/power/state"... I took a look at:

http://bugzilla.kernel.org/show_bug.cgi?id=2039

Attached the HD information.

Regards,

    Pedro

-- 
Pedro Martínez Juliá
\   pedromj at gmail.com
)|      WebLog: http://www.pedromj.com/blog
/           Página web: http://www.pedromj.com
GoogleTalk: pedromj at gmail.com
Socio HispaLinux #311
Usuario Linux #275438 - http://counter.li.org


/dev/hda:

ATA device, with non-removable media
	Model Number:       TOSHIBA MK8025GAS                       
	Serial Number:      658Q8001S
	Firmware Revision:  KA023H  
Standards:
	Supported: 6 5 4 3 
	Likely used: 6
Configuration:
	Logical		max	current
	cylinders	16383	16383
	heads		16	16
	sectors/track	63	63
	--
	CHS current addressable sectors:   16514064
	LBA    user addressable sectors:  156301488
	device size with M = 1024*1024:       76319 MBytes
	device size with M = 1000*1000:       80026 MBytes (80 GB)
Capabilities:
	LBA, IORDY(can be disabled)
	bytes avail on r/w long: 48	Queue depth: 1
	Standby timer values: spec'd by Standard, no device specific minimum
	R/W multiple sector transfer: Max = 16	Current = ?
	Advanced power management level: unknown setting (0x0080)
	DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 
	     Cycle time: min=120ns recommended=120ns
	PIO: pio0 pio1 pio2 pio3 pio4 
	     Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
	Enabled	Supported:
	   *	NOP cmd
	   *	READ BUFFER cmd
	   *	WRITE BUFFER cmd
	   *	Host Protected Area feature set
	   *	Look-ahead
	   *	Write cache
	   *	Power Management feature set
		Security Mode feature set
	   *	SMART feature set
	   *	Mandatory FLUSH CACHE command 
	   *	Device Configuration Overlay feature set 
		SET MAX security extension
	   *	Advanced Power Management feature set
	   *	SMART self-test 
	   *	SMART error logging 
Security: 
	Master password revision code = 65534
		supported
	not	enabled
	not	locked
		frozen
	not	expired: security count
	not	supported: enhanced erase
	72min for SECURITY ERASE UNIT. 
HW reset results:
	CBLID- above Vih
	Device num = 0 determined by the jumper
Checksum: correct

-- 
My laptop doesn't resume from S3 ACPI sleep state.
https://launchpad.net/bugs/31293