[Bug 29535] Pinnacle PCTV Pro Cards don't work in Dapper (no sound).

[sergecl]

Public bug reported:
https://launchpad.net/malone/bugs/29535

Affects: kernel-package (Ubuntu)
       Severity: Normal
       Priority: (none set)
         Status: Unconfirmed

Description:
Pinnacle PCTV Pro have no sound.
The card is good configured at the boot but the radio don't work.
I use the "radio" package to test (radio -c /dev/radio0).
This card works fine in Breezy but not in Dapper. I think it's perhaps a kernel problem.

Dmesg: 
mesg | grep bttv
[4294685.703000] bttv: driver version 0.9.16 loaded
[4294685.703000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[4294685.799000] bttv: Bt8xx card found (0).
[4294685.799000] bttv0: Bt878 (rev 17) at 0000:02:04.0, irq: 169, latency: 32, mmio: 0xf7efe000
[4294685.799000] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
[4294685.799000] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
[4294685.799000] bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init]
[4294685.800000] bttv0: i2c: checking for MSP34xx @ 0x80... found
[4294685.801000] bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
[4294685.801000] bttv0: using tuner=33
[4294685.801000] bttv0: i2c: checking for MSP34xx @ 0x80... found
[4294685.936000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[4294685.938000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[4294686.027000] bttv0: registered device video0
[4294686.027000] bttv0: registered device vbi0
[4294686.027000] bttv0: registered device radio0
[4294686.101000] bttv0: PLL: 28636363 => 35468950 .. ok
serge at ubuntu:~$ dmesg | grep bttv
[4294685.703000] bttv: driver version 0.9.16 loaded
[4294685.703000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[4294685.799000] bttv: Bt8xx card found (0).
[4294685.799000] bttv0: Bt878 (rev 17) at 0000:02:04.0, irq: 169, latency: 32, mmio: 0xf7efe000
[4294685.799000] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
[4294685.799000] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
[4294685.799000] bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init]
[4294685.800000] bttv0: i2c: checking for MSP34xx @ 0x80... found
[4294685.801000] bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
[4294685.801000] bttv0: using tuner=33
[4294685.801000] bttv0: i2c: checking for MSP34xx @ 0x80... found
[4294685.936000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[4294685.938000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[4294686.027000] bttv0: registered device video0
[4294686.027000] bttv0: registered device vbi0
[4294686.027000] bttv0: registered device radio0
[4294686.101000] bttv0: PLL: 28636363 => 35468950 .. ok