[Bug 32680] CPU Frequency Scaling does not work - Toshiba Satellite L15-S104
tas50
tas50 at humboldt.edu
Fri Feb 24 04:02:59 UTC 2006
Public bug reported:
https://launchpad.net/malone/bugs/32680
Affects: linux-source-2.6.12 linux-image-2.6.12-9-386 (Ubuntu)
Severity: Normal
Priority: (none set)
Status: Unconfirmed
Description:
I work at a University helpdesk and I've been trying to the Breezy live
CD on all the machines that come in to see what works and what doesn't
on these various models. I'm having problems with this Toshiba
Satellite L15-S104 and CPU frequency scaling. It's a Celeron M so it
should support scaling, but when I try to load the Gnome applet it says
that it is unsupported. It has worked on most of the computers I have
tried so far (except a Dell Inspiron 5100)
Here is the DMESG and LSHW printout
description: Notebook
product: Satellite L15
vendor: TOSHIBA
version: PSL10U-01X02FV
serial: 35051700W
width: 32 bits
capabilities: smbios-2.31 dmi-2.31
configuration: boot=oem-specific chassis=notebook uuid=6020E26C-F44B-C611-92BB-00C09F886DDF
*-core
description: Motherboard
product: Satellite L15
vendor: TOSHIBA
physical id: 0
version: Rev 1.0
serial: 35051700W
*-firmware:0
description: BIOS
vendor: TOSHIBA
physical id: 0
version: V1.80 (01/28/2005)
size: 107KB
capacity: 448KB
capabilities: isa pci pcmcia pnp apm upgrade shadowing escd cdboot int13floppy720 int5printscreen int9keyboard int14serial int17printer acpi usb smartbattery biosbootspecification
*-cpu
description: CPU
product: Intel(R) Celeron(R) M processor 1.30GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu at 0
version: 6.13.8
slot: uFCPGA2
size: 1300MHz
capacity: 1300MHz
width: 32 bits
clock: 400MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe
*-cache:0
description: L1 cache
physical id: 8
slot: L1 Cache
size: 32KB
capacity: 32KB
capabilities: asynchronous internal write-back
*-cache:1
description: L2 cache
physical id: 9
slot: L2 Cache
size: 1MB
capacity: 1MB
capabilities: burst external write-back
*-firmware:1
description: BIOS
physical id: 2042
version: ()
size: 1003KB
capabilities: pnp apm upgrade escd bootselect socketedrom pcmciaboot edd int13floppytoshiba int13floppy360 int17printer
*-memory
description: System Memory
physical id: 10
slot: System board or motherboard
size: 512MB
capacity: 3GB
*-bank:0
description: DIMM SRAM Synchronous 333 MHz (3.0 ns)
physical id: 0
slot: DIMM 0
size: 256MB
width: 64 bits
clock: 333MHz (3.003ns)
*-bank:1
description: DIMM SRAM Synchronous 333 MHz (3.0 ns)
physical id: 1
slot: DIMM 1
size: 256MB
width: 64 bits
clock: 333MHz (3.003ns)
*-pci
description: Host bridge
product: 82852/82855 GM/GME/PM/GMV Processor to I/O Controller
vendor: Intel Corporation
physical id: 100
bus info: pci at 00:00.0
version: 02
width: 32 bits
clock: 33MHz
*-system:0 UNCLAIMED
description: System peripheral
product: 82852/82855 GM/GME/PM/GMV Processor to I/O Controller
vendor: Intel Corporation
physical id: 0.1
bus info: pci at 00:00.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
*-system:1 UNCLAIMED
description: System peripheral
product: 82852/82855 GM/GME/PM/GMV Processor to I/O Controller
vendor: Intel Corporation
physical id: 0.3
bus info: pci at 00:00.3
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
*-display:0
description: VGA compatible controller
product: 82852/855GM Integrated Graphics Device
vendor: Intel Corporation
physical id: 2
bus info: pci at 00:02.0
version: 02
size: 128MB
width: 32 bits
clock: 33MHz
capabilities: vga bus_master cap_list
resources: iomemory:e8000000-efffffff iomemory:e0000000-e007ffff ioport:1800-1807 irq:6
*-display:1 UNCLAIMED
description: Display controller
product: 82852/855GM Integrated Graphics Device
vendor: Intel Corporation
physical id: 2.1
bus info: pci at 00:02.1
version: 02
size: 128MB
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
resources: iomemory:f0000000-f7ffffff iomemory:e0080000-e00fffff
*-usb:0
description: USB Controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci at 00:1d.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd
resources: ioport:1820-183f irq:6
*-usbhost
product: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
vendor: Linux 2.6.12-9-386 uhci_hcd
physical id: 1
bus info: usb at 1
logical name: usb1
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:1
description: USB Controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci at 00:1d.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd
resources: ioport:1840-185f irq:6
*-usbhost
product: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
vendor: Linux 2.6.12-9-386 uhci_hcd
physical id: 1
bus info: usb at 2
logical name: usb2
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:2
description: USB Controller
product: 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci at 00:1d.7
version: 03
width: 32 bits
clock: 33MHz
capabilities: ehci bus_master cap_list
configuration: driver=ehci_hcd
resources: iomemory:e0100000-e01003ff irq:10
*-usbhost
product: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
vendor: Linux 2.6.12-9-386 ehci_hcd
physical id: 1
bus info: usb at 3
logical name: usb3
version: 2.06
capabilities: usb-2.00
configuration: driver=hub maxpower=0mA slots=6 speed=480.0MB/s
*-usb
description: Mass storage device
product: Cruzer Micro
vendor: SanDisk Corporation
physical id: 2
bus info: usb at 3:2
logical name: scsi0
version: 0.10
serial: 20044528801dbcd252ab
capabilities: usb-2.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=200mA speed=480.0MB/s
*-disk
description: SCSI Disk
product: Cruzer Micro
vendor: SanDisk
physical id: 0.0.0
bus info: scsi at 0.0:0.0
logical name: /dev/sda
version: 0.1
size: 488MB
capabilities: removable
configuration: ansiversion=2
*-pci
description: PCI bridge
product: 82801 Mobile PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci at 00:1e.0
version: 83
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master
*-pcmcia
description: CardBus bridge
product: PCI1410 PC card Cardbus Controller
vendor: Texas Instruments
physical id: 1
bus info: pci at 02:01.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration: driver=yenta_cardbus
resources: iomemory:e0400000-e0400fff irq:10
*-network:0
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: 2
bus info: pci at 02:02.0
logical name: eth0
version: 10
serial: 00:c0:9f:88:6d:df
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegociation
configuration: autonegociation=on broadcast=yes driver=8139too driverversion=0.9.27 duplex=full ip=137.150.204.70 link=yes multicast=yes port=MII speed=100MB/s
resources: ioport:3800-38ff iomemory:e0401800-e04018ff irq:6
*-network:1 UNCLAIMED
description: Ethernet controller
product: [AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)
vendor: Linksys, A Division of Cisco Systems
physical id: 4
bus info: pci at 02:04.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
resources: ioport:3c00-3c1f iomemory:e0401c00-e0401c1f iomemory:e0401000-e04017ff irq:10
*-isa UNCLAIMED
description: ISA bridge
product: 82801DBM (ICH4-M) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci at 00:1f.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
*-ide
description: IDE interface
product: 82801DBM (ICH4-M) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci at 00:1f.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=PIIX_IDE
resources: ioport:1810-181f iomemory:20000000-200003ff irq:6
*-ide:0
description: IDE Channel 0
physical id: 0
bus info: ide at 0
logical name: ide0
clock: 33MHz
*-disk
description: ATA Disk
product: TOSHIBA MK4025GAS
vendor: Toshiba
physical id: 0
bus info: ide at 0.0
logical name: /dev/hda
version: KA100U
serial: 15UU7165S
size: 37GB
capacity: 37GB
capabilities: ata dma lba iordy smart security pm apm
configuration: apm=off mode=udma5 smart=on
*-ide:1
description: IDE Channel 1
physical id: 1
bus info: ide at 1
logical name: ide1
clock: 33MHz
*-cdrom
description: DVD reader
product: TSSTcorpCDW/DVD TS-L462A
physical id: 0
bus info: ide at 1.0
logical name: /dev/hdc
version: TO30
serial: Y44I800295
capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy audio cd-r cd-rw dvd
configuration: mode=udma2
*-serial UNCLAIMED
description: SMBus
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci at 00:1f.3
version: 03
width: 32 bits
clock: 33MHz
resources: ioport:1860-187f irq:10
*-multimedia
description: Multimedia audio controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
vendor: Intel Corporation
physical id: 1f.5
bus info: pci at 00:1f.5
version: 03
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=Intel ICH
resources: ioport:1c00-1cff ioport:1880-18bf iomemory:e0100c00-e0100dff iomemory:e0100800-e01008ff irq:11
*-communication UNCLAIMED
description: Modem
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller
vendor: Intel Corporation
physical id: 1f.6
bus info: pci at 00:1f.6
version: 03
width: 32 bits
clock: 33MHz
capabilities: generic cap_list
resources: ioport:2400-24ff ioport:2000-207f irq:11
*-battery
description: Lithium Ion Battery
product: Sanyo
vendor: Sanyo
physical id: 1
slot: Right Side
capacity: 4400mWh
configuration: voltage=14.8V
nterrupt Link [LNKA] (IRQs *6)
[4294669.732000] ACPI: PCI Interrupt Link [LNKB] (IRQs 11) *10
[4294669.732000] ACPI: PCI Interrupt Link [LNKC] (IRQs 6) *0, disabled.
[4294669.732000] ACPI: PCI Interrupt Link [LNKD] (IRQs *6)
[4294669.733000] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[4294669.733000] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
[4294669.733000] ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *0, disabled.
[4294669.734000] ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
[4294669.734000] burst-mode-ec-10-Aug
[4294669.734000] ACPI: Embedded Controller [EC0] (gpe 29)
[4294669.762000] ACPI: Device [BAY1] status [00000008]: functional but not present; setting present
[4294669.765000] ACPI: Power Resource [PFN0] (off)
[4294669.766000] ACPI: Power Resource [PFN1] (off)
[4294669.766000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294669.767000] pnp: PnP ACPI init
[4294669.771000] pnp: PnP ACPI: found 7 devices
[4294669.771000] PnPBIOS: Disabled by ACPI PNP
[4294669.771000] PCI: Using ACPI for IRQ routing
[4294669.771000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294669.777000] pnp: 00:03: ioport range 0x164e-0x164f has been reserved
[4294669.777000] Simple Boot Flag at 0x37 set to 0x1
[4294669.778000] audit: initializing netlink socket (disabled)
[4294669.778000] audit: initialized
[4294669.779000] VFS: Disk quotas dquot_6.5.1
[4294669.779000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294669.779000] devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
[4294669.779000] devfs: boot_options: 0x0
[4294669.779000] Initializing Cryptographic API
[4294669.782000] isapnp: Scanning for PnP cards...
[4294670.137000] isapnp: No Plug & Play device found
[4294670.155000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294670.157000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294670.157000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294670.157000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
[4294670.160000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[4294670.160000] PCI: setting IRQ 11 as level-triggered
[4294670.160000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[4294670.160000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[4294670.160000] io scheduler noop registered
[4294670.160000] io scheduler anticipatory registered
[4294670.160000] io scheduler deadline registered
[4294670.160000] io scheduler cfq registered
[4294670.160000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
[4294670.161000] EISA: Probing bus 0 at eisa.0
[4294670.161000] Cannot allocate resource for EISA slot 1
[4294670.161000] Cannot allocate resource for EISA slot 2
[4294670.161000] Cannot allocate resource for EISA slot 3
[4294670.161000] EISA: Detected 0 cards.
[4294670.161000] NET: Registered protocol family 2
[4294670.171000] IP: routing cache hash table of 4096 buckets, 32Kbytes
[4294670.171000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[4294670.171000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294670.171000] TCP: Hash tables configured (established 16384 bind 16384)
[4294670.171000] NET: Registered protocol family 8
[4294670.171000] NET: Registered protocol family 20
[4294670.171000] ACPI wakeup devices:
[4294670.171000] GLAN MPCI T394 MDM0 USB1 USB2 USB3
[4294670.171000] ACPI: (supports S0 S3 S4 S5)
[4294670.173000] RAMDISK: Compressed image found at block 0
[4294670.325000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294670.506000] VFS: Mounted root (ext2 filesystem).
[4294670.507000] VFS: Mounted root (ext2 filesystem).
[4294670.507000] Trying to move old root to /initrd ... okay
[4294670.507000] Freeing unused kernel memory: 224k freed
[4294670.611000] NET: Registered protocol family 1
[4294671.299000] usbcore: registered new driver usbfs
[4294671.299000] usbcore: registered new driver hub
[4294671.301000] USB Universal Host Controller Interface driver v2.2
[4294671.302000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6
[4294671.302000] PCI: setting IRQ 6 as level-triggered
[4294671.302000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
[4294671.302000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294671.302000] uhci_hcd 0000:00:1d.0: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
[4294671.364000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294671.364000] uhci_hcd 0000:00:1d.0: irq 6, io base 0x00001820
[4294671.365000] hub 1-0:1.0: USB hub found
[4294671.365000] hub 1-0:1.0: 2 ports detected
[4294671.368000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6
[4294671.368000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
[4294671.368000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294671.368000] uhci_hcd 0000:00:1d.1: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
[4294671.430000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294671.430000] uhci_hcd 0000:00:1d.1: irq 6, io base 0x00001840
[4294671.431000] hub 2-0:1.0: USB hub found
[4294671.431000] hub 2-0:1.0: 2 ports detected
[4294671.500000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
[4294671.500000] PCI: setting IRQ 10 as level-triggered
[4294671.500000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
[4294671.500000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294671.500000] ehci_hcd 0000:00:1d.7: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
[4294671.500000] ehci_hcd 0000:00:1d.7: debug port 1
[4294671.500000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[4294671.500000] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xe0100000
[4294671.504000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4294671.504000] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294671.505000] hub 3-0:1.0: USB hub found
[4294671.505000] hub 3-0:1.0: 6 ports detected
[4294671.608000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.608000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294671.608000] ACPI: bus type ide registered
[4294671.712000] Linux Kernel Card Services
[4294671.712000] options: [pci] [cardbus] [pm]
[4294671.715000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[4294671.715000] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
[4294671.716000] Yenta: CardBus bridge found at 0000:02:01.0 [1179:ff31]
[4294671.716000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294671.716000] Yenta: Routing CardBus interrupts to PCI
[4294671.716000] Yenta TI: socket 0000:02:01.0, mfunc 0x015c1d22, devctl 0x44
[4294671.937000] Yenta: ISA IRQ mask 0x00b8, PCI irq 10
[4294671.937000] Socket status: 30000006
[4294673.261000] ACPI: Fan [FAN0] (off)
[4294673.261000] ACPI: Fan [FAN1] (off)
[4294673.271000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[4294673.329000] ACPI: Thermal Zone [THRM] (55 C)
[4294673.876000] usbcore: registered new driver usbkbd
[4294673.876000] drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
[4294673.889000] usbcore: registered new driver hiddev
[4294673.894000] usbcore: registered new driver usbhid
[4294673.894000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4294673.904000] usbcore: registered new driver usbserial
[4294673.909000] drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
[4294673.913000] usbcore: registered new driver usbserial_generic
[4294673.913000] drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
[4294674.215000] vga16fb: initializing
[4294674.215000] vga16fb: mapped to 0xc00a0000
[4294674.229000] fb0: VGA16 VGA frame buffer device
[4294674.369000] Console: switching to colour frame buffer device 80x30
[4294682.391000] SCSI subsystem initialized
[4294682.397000] Initializing USB Mass Storage driver...
[4294682.401000] usbcore: registered new driver usb-storage
[4294682.401000] USB Mass Storage support registered.
[4294682.432000] floppy0: Unable to grab IRQ6 for the floppy driver
[4294683.169000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[4294683.170000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6
[4294683.170000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
[4294683.170000] ICH4: chipset revision 3
[4294683.170000] ICH4: not 100% native mode: will probe irqs later
[4294683.170000] ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
[4294683.170000] ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio
[4294683.170000] Probing IDE interface ide0...
[4294683.434000] hda: TOSHIBA MK4025GAS, ATA DISK drive
[4294684.046000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294684.046000] Probing IDE interface ide1...
[4294684.718000] hdc: TSSTcorpCDW/DVD TS-L462A, ATAPI CD/DVD-ROM drive
[4294685.330000] ide1 at 0x170-0x177,0x376 on irq 15
[4294685.383000] Probing IDE interface ide2...
[4294685.899000] Probing IDE interface ide3...
[4294686.412000] Probing IDE interface ide4...
[4294686.925000] Probing IDE interface ide5...
[4294687.470000] ide-floppy driver 0.99.newide
[4294687.509000] hda: max request size: 128KiB
[4294687.743000] hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(100)
[4294687.743000] hda: cache flushes supported
[4294687.744000] /dev/ide/host0/bus0/target0/lun0: p1
[4294687.826000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
[4294687.826000] Uniform CD-ROM driver Revision: 3.20
[4294688.232000] cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
[4294688.234000] cs: IO port probe 0xc00-0xcf7: clean.
[4294688.234000] cs: IO port probe 0xa00-0xaff: clean.
[4294691.990000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294692.092000] ISO 9660 Extensions: RRIP_1991A
[4294701.038000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294701.042000] 8139cp: pci dev 0000:02:02.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[4294701.042000] 8139cp: Try the "8139too" driver instead.
[4294701.067000] 8139too Fast Ethernet driver 0.9.27
[4294701.072000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
[4294701.076000] eth0: RealTek RTL8139 at 0x3800, 00:c0:9f:88:6d:df, IRQ 6
[4294701.076000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[4294702.591000] floppy0: Unable to grab IRQ6 for the floppy driver
[4294703.451000] NET: Registered protocol family 17
[4294703.461000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294711.203000] floppy0: Unable to grab IRQ6 for the floppy driver
[4294712.077000] cloop: Initializing cloop v2.01
[4294712.203000] cloop: loaded (max 8 devices)
[4294712.285000] loop: loaded (max 8 devices)
[4294712.301000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
[4294714.159000] cloop: losetup_file: 32753 blocks, 65536 bytes/block, largest block is 65562 bytes.
[4294714.191000] EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
[4294760.314000] NET: Registered protocol family 10
[4294760.314000] Disabled Privacy Extensions on device c02eb280(lo)
[4294760.314000] IPv6 over IPv4 tunneling driver
[4294761.651000] apm: BIOS not found.
[4294764.697000] Linux agpgart interface v0.101 (c) Dave Jones
[4294771.197000] eth0: no IPv6 routers present
[4294800.461000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294822.928000] lp: driver loaded but no devices found
[4294822.957000] mice: PS/2 mouse device common for all mice
[4294823.569000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x256eb1, caps: 0x804713/0x0
[4294823.569000] synaptics: Toshiba Satellite L15 detected, limiting rate to 40pps.
[4294823.623000] input: SynPS/2 Synaptics TouchPad on isa0060/serio1
[4294825.122000] ts: Compaq touchscreen protocol output
[4294838.384000] agpgart: Detected an Intel 855 Chipset.
[4294838.385000] agpgart: Detected 16252K stolen memory.
[4294838.410000] agpgart: AGP aperture is 128M @ 0xe8000000
[4294840.256000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294840.267000] shpchp: shpc_init : shpc_cap_offset == 0
[4294840.267000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294840.367000] hw_random hardware driver 1.0.0 loaded
[4294840.835000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[4294840.835000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294841.142000] intel8x0_measure_ac97_clock: measured 49758 usecs
[4294841.142000] intel8x0: clocking to 48000
[4294844.833000] Real Time Clock Driver v1.12
[4294851.312000] spurious 8259A interrupt: IRQ7.
[4294858.914000] ACPI: Power Button (FF) [PWRF]
[4294858.914000] ACPI: Lid Switch [LID]
[4294859.088000] base: 0x18 alert: 0x20
[4294859.108000] i2c-acpi-ec.c: ACPI EC SMBus adapter at 0x18
[4294859.186000] ibm_acpi: ec object not found
[4294859.346000] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)[4294888.542000] [drm] Initialized drm 1.0.0 20040925
[4294888.547000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
[4294888.552000] [drm] Initialized i915 1.2.0 20040405 on minor 0: Intel Corporation 82852/855GM Integrated Graphics Device
[4294888.556000] [drm] Initialized i915 1.2.0 20040405 on minor 1: Intel Corporation 82852/855GM Integrated Graphics Device (#2)
[4294888.556000] mtrr: base(0xe8020000) is not aligned on a size(0x300000) boundary
[4294889.825000] apm: BIOS not found.
[4294892.449000] cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
[4294892.452000] cs: IO port probe 0xc00-0xcf7: clean.
[4294892.452000] cs: IO port probe 0xa00-0xaff: clean.
[4294892.995000] Bluetooth: Core ver 2.7
[4294892.995000] NET: Registered protocol family 31
[4294892.995000] Bluetooth: HCI device and connection manager initialized
[4294892.995000] Bluetooth: HCI socket layer initialized
[4294893.010000] Bluetooth: L2CAP ver 2.7
[4294893.010000] Bluetooth: L2CAP socket layer initialized
[4294893.139000] Bluetooth: RFCOMM ver 1.5
[4294893.139000] Bluetooth: RFCOMM socket layer initialized
[4294893.139000] Bluetooth: RFCOMM TTY layer initialized
[4295660.995000] usb 3-2: new high speed USB device using ehci_hcd and address 2[4295661.072000] scsi0 : SCSI emulation for USB Mass Storage devices
[4295661.074000] usb-storage: device found at 2
[4295661.074000] usb-storage: waiting for device to settle before scanning
[4295666.074000] Vendor: SanDisk Model: Cruzer Micro Rev: 0.1
[4295666.074000] Type: Direct-Access ANSI SCSI revision: 02
[4295666.083000] usb-storage: device scan complete
[4295666.128000] SCSI device sda: 1000944 512-byte hdwr sectors (512 MB)
[4295666.129000] sda: Write Protect is off
[4295666.129000] sda: Mode Sense: 03 00 00 00
[4295666.129000] sda: assuming drive cache: write through
[4295666.133000] SCSI device sda: 1000944 512-byte hdwr sectors (512 MB)
[4295666.133000] sda: Write Protect is off
[4295666.133000] sda: Mode Sense: 03 00 00 00
[4295666.133000] sda: assuming drive cache: write through
[4295666.133000] /dev/scsi/host0/bus0/target0/lun0: p1
[4295666.135000] Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
[4295666.848000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[4296120.949000] Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
More information about the kernel-bugs
mailing list