[Bug 32289] PnPACPI: METHOD_NAME__CRS failure for PNP0c02

[Laurent Carlier]

Public bug report changed:
https://launchpad.net/malone/bugs/32289

Comment:
Same here with Linux kernel image for version 2.6.15 on AMD K7
2.6.15-16.23 :

on 20051216
[4294668.094000] ACPI: Interpreter enabled
[4294668.094000] ACPI: Using IOAPIC for interrupt routing
[4294668.094000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
[4294668.095000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[4294668.095000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12)
[4294668.095000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[4294668.095000] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12)
[4294668.096000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12)
[4294668.096000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[4294668.096000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294668.096000] PCI: Probing PCI hardware (bus 00)
[4294668.096000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294668.099000] PCI quirk: region e400-e47f claimed by vt8235 PM
[4294668.099000] PCI quirk: region e800-e80f claimed by vt8235 SMB
[4294668.099000] Boot video device is 0000:01:00.0
[4294668.099000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294668.100000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[4294668.105000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.105000] pnp: PnP ACPI init
[4294668.105000] pnp: PnPACPI: unknown resource type 7
[4294668.105000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
[4294668.105000] pnp: PnPACPI: unknown resource type 7
[4294668.105000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294668.106000] pnp: PnPACPI: unknown resource type 7
[4294668.106000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294668.106000] pnp: PnPACPI: unknown resource type 7
[4294668.106000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200
[4294668.106000] pnp: PnPACPI: unknown resource type 7
[4294668.106000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00
[4294668.106000] pnp: PnPACPI: unknown resource type 7
[4294668.106000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800
[4294668.106000] pnp: PnPACPI: unknown resource type 7
[4294668.106000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04
[4294668.106000] pnp: PnPACPI: unknown resource type 7
[4294668.106000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0700
[4294668.108000] pnp: PnPACPI: unknown resource type 7
[4294668.108000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0401
[4294668.108000] pnp: PnPACPI: unknown resource type 7
[4294668.108000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0501
[4294668.109000] pnp: PnPACPI: unknown resource type 7
[4294668.109000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0303
[4294668.110000] pnp: PnPACPI: unknown resource type 7
[4294668.110000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNPb02f
[4294668.110000] pnp: PnPACPI: unknown resource type 7
[4294668.110000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294668.110000] pnp: PnP ACPI: found 0 devices
[4294668.110000] PnPBIOS: Disabled by ACPI PNP
[4294668.110000] PCI: Using ACPI for IRQ routing
[4294668.110000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294668.114000] PCI: Bridge: 0000:00:01.0
[4294668.114000]   IO window: disabled.
[4294668.114000]   MEM window: e6000000-e75fffff
[4294668.114000]   PREFETCH window: e7700000-efffffff
[4294668.114000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294668.114000] Simple Boot Flag at 0x3a set to 0x1
[4294668.115000] audit: initializing netlink socket (disabled)
[4294668.115000] audit(1140603832.113:1): initialized
[4294668.115000] VFS: Disk quotas dquot_6.5.1
[4294668.115000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.115000] Initializing Cryptographic API
[4294668.115000] io scheduler noop registered
[4294668.115000] io scheduler anticipatory registered
[4294668.115000] io scheduler deadline registered
[4294668.115000] io scheduler cfq registered
[4294668.115000] isapnp: Scanning for PnP cards...
[4294668.471000] isapnp: No Plug & Play device found
[4294668.487000] PNP: No PS/2 controller found. Probing ports directly.
[4294668.488000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294668.489000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294668.489000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[4294668.489000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.489000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294668.490000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294668.490000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294668.490000] ACPI: bus type ide registered
[4294668.490000] mice: PS/2 mouse device common for all mice
[4294668.490000] EISA: Probing bus 0 at eisa.0
[4294668.490000] EISA: Detected 0 cards.
[4294668.490000] NET: Registered protocol family 2
[4294668.500000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
[4294668.500000] TCP established hash table entries: 32768 (order: 6, 393216 bytes)
[4294668.501000] TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
[4294668.501000] TCP: Hash tables configured (established 32768 bind 32768)
[4294668.501000] TCP reno registered
[4294668.502000] TCP bic registered
[4294668.502000] NET: Registered protocol family 1
[4294668.502000] NET: Registered protocol family 8
[4294668.502000] NET: Registered protocol family 20
[4294668.502000] Using IPI No-Shortcut mode
[4294668.502000] ACPI wakeup devices:
[4294668.502000] PCI0 PCI1 USB0 USB1 USB2 SU20 SLAN
[4294668.502000] ACPI: (supports S0 S1 S4 S5)
[4294668.502000] Freeing unused kernel memory: 300k freed
[4294668.574000] vga16fb: initializing
[4294668.574000] vga16fb: mapped to 0x800a0000
[4294668.678000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294668.696000] Console: switching to colour frame buffer device 80x25
[4294668.696000] fb0: VGA16 VGA frame buffer device
[4294669.810000] Capability LSM initialized
[4294670.214000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[4294670.214000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
[4294670.214000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
[4294670.214000] VP_IDE: chipset revision 6
[4294670.214000] VP_IDE: not 100% native mode: will probe irqs later
[4294670.214000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[4294670.214000]     ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:DMA
[4294670.214000]     ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:DMA
[4294670.214000] Probing IDE interface ide0...
[4294670.600000] hda: ST380011A, ATA DISK drive
[4294670.855000] hdb: Maxtor 6Y080L0, ATA DISK drive
[4294670.906000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294670.907000] Probing IDE interface ide1...
[4294671.701000] hdc: HITACHI CDR-8230, ATAPI CD/DVD-ROM drive
[4294672.415000] hdd: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
[4294672.468000] ide1 at 0x170-0x177,0x376 on irq 15
[4294672.475000] hda: max request size: 1024KiB
[4294672.492000] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[4294672.492000] hda: cache flushes supported
[4294672.492000]  hda: hda1 hda2 < hda5 > hda3 hda4
[4294672.518000] hdb: max request size: 128KiB
[4294672.518000] hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[4294672.518000] hdb: cache flushes supported
[4294672.518000]  hdb: hdb1 hdb2
[4294672.520000] hdc: ATAPI 20X CD-ROM drive, 128kB Cache, DMA
[4294672.520000] Uniform CD-ROM driver Revision: 3.20
[4294672.520000]  hdb1: <bsd: hdb5 hdb6 hdb7 hdb8 hdb9 >
[4294672.531000] hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294673.118000] usbcore: registered new driver usbfs
[4294673.118000] usbcore: registered new driver hub
[4294673.120000] USB Universal Host Controller Interface driver v2.3
[4294673.120000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 169
[4294673.120000] PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 9
[4294673.121000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[4294673.121000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[4294673.121000] uhci_hcd 0000:00:10.0: irq 169, io base 0x0000d400
[4294673.121000] hub 1-0:1.0: USB hub found
[4294673.121000] hub 1-0:1.0: 2 ports detected
[4294673.222000] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 169
[4294673.222000] PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 9
[4294673.222000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[4294673.222000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[4294673.222000] uhci_hcd 0000:00:10.1: irq 169, io base 0x0000d000
[4294673.222000] hub 2-0:1.0: USB hub found
[4294673.222000] hub 2-0:1.0: 2 ports detected
[4294673.323000] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 169
[4294673.323000] PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 9
[4294673.323000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[4294673.323000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[4294673.323000] uhci_hcd 0000:00:10.2: irq 169, io base 0x0000b800
[4294673.323000] hub 3-0:1.0: USB hub found
[4294673.323000] hub 3-0:1.0: 2 ports detected
[4294673.426000] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 169
[4294673.426000] PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 9
[4294673.426000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[4294673.426000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[4294673.426000] ehci_hcd 0000:00:10.3: irq 169, io mem 0xe5000000
[4294673.426000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294673.426000] hub 4-0:1.0: USB hub found
[4294673.426000] hub 4-0:1.0: 6 ports detected
[4294673.428000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[4294673.805000] Attempting manual resume
[4294673.826000] kjournald starting.  Commit interval 5 seconds
[4294673.826000] EXT3-fs: mounted filesystem with ordered data mode.
[4294674.526000] usb 1-1: new full speed USB device using uhci_hcd and address 3
[4294674.862000] usb 1-2: new low speed USB device using uhci_hcd and address 4
[4294679.795000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294679.806000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294679.824000] Linux agpgart interface v0.101 (c) Dave Jones
[4294679.876000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[4294679.885000] agpgart: AGP aperture is 128M @ 0xf0000000
[4294680.023000] nvidia: module license 'NVIDIA' taints kernel.
[4294680.030000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
[4294680.030000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-8178  Wed Dec 14 16:22:51 PST 2005
[4294680.190000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[4294680.190000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 185
[4294680.190000] PCI: Via IRQ fixup for 0000:00:12.0, from 0 to 9
[4294680.191000] eth0: VIA Rhine II at 0x1b000, 00:0c:6e:a5:4b:36, IRQ 185.
[4294680.191000] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[4294680.378000] 8139too Fast Ethernet driver 0.9.27
[4294680.378000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 193
[4294680.378000] eth0: RealTek RTL8139 at 0xa0928000, 00:50:fc:f8:fb:fd, IRQ 193
[4294680.378000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[4294680.393000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294680.644000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201
[4294680.644000] PCI: Via IRQ fixup for 0000:00:11.5, from 0 to 9
[4294680.646000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[4294680.690000] irda_init()
[4294680.690000] NET: Registered protocol family 23
[4294680.765000] usbcore: registered new driver snd-usb-audio
[4294680.765000] usbcore: registered new driver hiddev
[4294680.786000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
[4294680.786000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-2
[4294680.786000] usbcore: registered new driver usbhid
[4294680.786000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294680.973000] ts: Compaq touchscreen protocol output
[4294681.157000] codec_read: codec 0 is not valid [0xfe0000]
[4294681.166000] codec_read: codec 0 is not valid [0xfe0000]
[4294681.176000] codec_read: codec 0 is not valid [0xfe0000]
[4294681.185000] codec_read: codec 0 is not valid [0xfe0000]
[4294681.686000] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
[4294681.809000] parport0: irq 7 detected
[4294681.891000] lp0: using parport0 (polling).
[4294682.726000] Adding 979956k swap on /dev/hdb2.  Priority:-1 extents:1 across:979956k
[4294682.802000] EXT3 FS on hda1, internal journal
[4294683.001000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294683.001000] md: bitmap version 4.39
[4294683.508000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
[4294683.808000] cdrom: open failed.
[4294684.238000] cdrom: open failed.
[4294684.241000] cdrom: open failed.
[4294685.699000] kjournald starting.  Commit interval 5 seconds
[4294685.699000] EXT3 FS on hda5, internal journal
[4294685.699000] EXT3-fs: mounted filesystem with ordered data mode.
[4294689.993000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294693.536000] NET: Registered protocol family 10
[4294693.536000] lo: Disabled Privacy Extensions
[4294693.536000] IPv6 over IPv4 tunneling driver
[4294698.408000] ACPI: Power Button (FF) [PWRF]
[4294698.408000] ACPI: Power Button (CM) [PWRB]
[4294698.524000] ibm_acpi: ec object not found
[4294704.261000] eth1: no IPv6 routers present
[4294704.306000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294704.306000] apm: overridden by ACPI.
[4294705.277000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294705.277000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294705.277000] ide: failed opcode was: 0xec
[4294705.288000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294705.288000] hdd: drive_cmd: error=0x04 { AbortedCommand }
[4294705.288000] ide: failed opcode was: 0xec
[4294705.321000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294705.321000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294705.321000] ide: failed opcode was: 0xec
[4294705.332000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294705.332000] hdd: drive_cmd: error=0x04 { AbortedCommand }
[4294705.332000] ide: failed opcode was: 0xec
[4294705.911000] Bluetooth: Core ver 2.8