[Bug 37288] Re: [Bug 37288] Re: Bluetooth not discovered on Dell Inspiron 9400
Alex
gsasha at cs.technion.ac.il
Tue Aug 29 09:41:20 UTC 2006
On Tuesday 29 August 2006 11:39, devnull wrote:
> and my dmesg....
??? Do you want the output of my dmesg? Attached.
[17179569.184000] Linux version 2.6.15-26-686 (buildd at terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu Aug 3 03:13:28 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[17179569.184000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003fed3400 (usable)
[17179569.184000] BIOS-e820: 000000003fed3400 - 0000000040000000 (reserved)
[17179569.184000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
[17179569.184000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[17179569.184000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[17179569.184000] 126MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 261843
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32467 pages, LIFO batch:7
[17179569.184000] DMI 2.4 present.
[17179569.184000] ACPI: RSDP (v000 DELL ) @ 0x000fc370
[17179569.184000] ACPI: RSDT (v001 DELL M07 0x27d50c11 ASL 0x00000061) @ 0x3fed3a54
[17179569.184000] ACPI: FADT (v001 DELL M07 0x27d50c11 ASL 0x00000061) @ 0x3fed4800
[17179569.184000] ACPI: MADT (v001 DELL M07 0x27d50c11 ASL 0x00000047) @ 0x3fed5000
[17179569.184000] ACPI: MCFG (v016 DELL M07 0x27d50c11 ASL 0x00000061) @ 0x3fed4fc0
[17179569.184000] ACPI: BOOT (v001 DELL M07 0x27d50c11 ASL 0x00000061) @ 0x3fed4bc0
[17179569.184000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x3fed3a8c
[17179569.184000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:14 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 6:14 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda5 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2161.657 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179573.152000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179573.152000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179573.172000] Memory: 1026084k/1047372k available (2110k kernel code, 20620k reserved, 595k data, 332k init, 129868k highmem)
[17179573.172000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179573.256000] Calibrating delay using timer specific routine.. 4329.42 BogoMIPS (lpj=8658840)
[17179573.256000] Security Framework v1.0.0 initialized
[17179573.256000] SELinux: Disabled at boot.
[17179573.256000] Mount-cache hash table entries: 512
[17179573.256000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179573.256000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179573.256000] monitor/mwait feature present.
[17179573.256000] using mwait in idle threads.
[17179573.256000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179573.256000] CPU: L2 cache: 2048K
[17179573.256000] CPU: Hyper-Threading is disabled
[17179573.256000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000
[17179573.256000] mtrr: v2.0 (20020519)
[17179573.256000] Enabling fast FPU save and restore... done.
[17179573.256000] Enabling unmasked SIMD FPU exception support... done.
[17179573.256000] Checking 'hlt' instruction... OK.
[17179573.272000] SMP alternatives: switching to UP code
[17179573.272000] checking if image is initramfs... it is
[17179573.732000] Freeing initrd memory: 6816k freed
[17179573.752000] ACPI: Looking for DSDT ... not found!
[17179573.756000] CPU0: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08
[17179573.756000] SMP alternatives: switching to SMP code
[17179573.756000] Booting processor 1/1 eip 3000
[17179573.768000] Initializing CPU#1
[17179573.848000] Calibrating delay using timer specific routine.. 4322.82 BogoMIPS (lpj=8645651)
[17179573.848000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179573.848000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179573.848000] monitor/mwait feature present.
[17179573.848000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179573.848000] CPU: L2 cache: 2048K
[17179573.848000] CPU: Hyper-Threading is disabled
[17179573.848000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000
[17179573.848000] CPU1: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08
[17179573.848000] Total of 2 processors activated (8652.24 BogoMIPS).
[17179573.848000] ENABLING IO-APIC IRQs
[17179573.848000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179573.992000] checking TSC synchronization across 2 CPUs:
[17179573.992000] CPU#0 had 0 usecs TSC skew, fixed it up.
[17179573.992000] CPU#1 had 0 usecs TSC skew, fixed it up.
[17179573.996000] Brought up 2 CPUs
[17179573.996000] NET: Registered protocol family 16
[17179573.996000] EISA bus registered
[17179573.996000] ACPI: bus type pci registered
[17179574.016000] PCI: PCI BIOS revision 2.10 entry at 0xfb4d6, last bus=14
[17179574.016000] PCI: Using MMCONFIG
[17179574.016000] ACPI: Subsystem revision 20051216
[17179574.040000] ACPI: Interpreter enabled
[17179574.040000] ACPI: Using IOAPIC for interrupt routing
[17179574.040000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179574.040000] PCI: Probing PCI hardware (bus 00)
[17179574.040000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179574.056000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[17179574.056000] Boot video device is 0000:01:00.0
[17179574.056000] PCI: Transparent bridge - 0000:00:1e.0
[17179574.056000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179574.076000] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
[17179574.076000] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
[17179574.076000] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[17179574.076000] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
[17179574.076000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[17179574.076000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179574.076000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179574.076000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[17179574.076000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[17179574.076000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[17179574.080000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[17179574.080000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP1._PRT]
[17179574.080000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[17179574.080000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179574.080000] pnp: PnP ACPI init
[17179574.096000] pnp: PnP ACPI: found 10 devices
[17179574.096000] PnPBIOS: Disabled by ACPI PNP
[17179574.096000] PCI: Using ACPI for IRQ routing
[17179574.096000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179574.160000] pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
[17179574.160000] pnp: 00:01: ioport range 0x1000-0x1005 could not be reserved
[17179574.160000] pnp: 00:01: ioport range 0x1008-0x100f could not be reserved
[17179574.160000] pnp: 00:02: ioport range 0xf400-0xf4fe has been reserved
[17179574.160000] pnp: 00:02: ioport range 0x1006-0x1007 has been reserved
[17179574.160000] pnp: 00:02: ioport range 0x100a-0x1059 could not be reserved
[17179574.160000] pnp: 00:02: ioport range 0x1060-0x107f has been reserved
[17179574.160000] pnp: 00:02: ioport range 0x1080-0x10bf has been reserved
[17179574.160000] pnp: 00:02: ioport range 0x10c0-0x10df has been reserved
[17179574.160000] pnp: 00:07: ioport range 0xc80-0xcff has been reserved
[17179574.160000] pnp: 00:07: ioport range 0x910-0x91f has been reserved
[17179574.160000] pnp: 00:07: ioport range 0x920-0x92f has been reserved
[17179574.160000] pnp: 00:07: ioport range 0xcb0-0xcbf has been reserved
[17179574.160000] pnp: 00:07: ioport range 0x940-0x97f has been reserved
[17179574.160000] PCI: Bridge: 0000:00:01.0
[17179574.160000] IO window: e000-efff
[17179574.160000] MEM window: dd000000-dfefffff
[17179574.160000] PREFETCH window: c0000000-cfffffff
[17179574.160000] PCI: Bridge: 0000:00:1c.0
[17179574.160000] IO window: disabled.
[17179574.160000] MEM window: disabled.
[17179574.160000] PREFETCH window: disabled.
[17179574.160000] PCI: Bridge: 0000:00:1c.1
[17179574.160000] IO window: disabled.
[17179574.160000] MEM window: dcf00000-dcffffff
[17179574.160000] PREFETCH window: disabled.
[17179574.160000] PCI: Bridge: 0000:00:1c.3
[17179574.160000] IO window: d000-dfff
[17179574.160000] MEM window: dcc00000-dcefffff
[17179574.160000] PREFETCH window: d0000000-d01fffff
[17179574.160000] PCI: Bridge: 0000:00:1e.0
[17179574.160000] IO window: disabled.
[17179574.160000] MEM window: dcb00000-dcbfffff
[17179574.160000] PREFETCH window: disabled.
[17179574.160000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179574.160000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179574.160000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179574.160000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179574.160000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
[17179574.160000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179574.160000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185
[17179574.160000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[17179574.160000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179574.160000] Simple Boot Flag at 0x79 set to 0x1
[17179574.164000] audit: initializing netlink socket (disabled)
[17179574.164000] audit(1156834626.160:1): initialized
[17179574.164000] highmem bounce pool size: 64 pages
[17179574.164000] VFS: Disk quotas dquot_6.5.1
[17179574.164000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179574.164000] Initializing Cryptographic API
[17179574.164000] io scheduler noop registered
[17179574.164000] io scheduler anticipatory registered
[17179574.164000] io scheduler deadline registered
[17179574.164000] io scheduler cfq registered
[17179574.164000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179574.164000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179574.164000] assign_interrupt_mode Found MSI capability
[17179574.164000] Allocate Port Service[pcie00]
[17179574.164000] Allocate Port Service[pcie03]
[17179574.164000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179574.164000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179574.164000] assign_interrupt_mode Found MSI capability
[17179574.164000] Allocate Port Service[pcie00]
[17179574.164000] Allocate Port Service[pcie02]
[17179574.164000] Allocate Port Service[pcie03]
[17179574.164000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
[17179574.164000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179574.164000] assign_interrupt_mode Found MSI capability
[17179574.164000] Allocate Port Service[pcie00]
[17179574.164000] Allocate Port Service[pcie02]
[17179574.164000] Allocate Port Service[pcie03]
[17179574.164000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185
[17179574.164000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[17179574.164000] assign_interrupt_mode Found MSI capability
[17179574.164000] Allocate Port Service[pcie00]
[17179574.164000] Allocate Port Service[pcie02]
[17179574.164000] Allocate Port Service[pcie03]
[17179574.164000] isapnp: Scanning for PnP cards...
[17179574.516000] isapnp: No Plug & Play device found
[17179574.532000] Real Time Clock Driver v1.12
[17179574.532000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179574.532000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179574.532000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.532000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179574.536000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179574.536000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179574.536000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179574.536000] mice: PS/2 mouse device common for all mice
[17179574.536000] EISA: Probing bus 0 at eisa.0
[17179574.536000] EISA: Cannot allocate resource for mainboard
[17179574.536000] Cannot allocate resource for EISA slot 1
[17179574.536000] EISA: Detected 0 cards.
[17179574.536000] NET: Registered protocol family 2
[17179574.544000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.584000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179574.584000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[17179574.584000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[17179574.584000] TCP: Hash tables configured (established 131072 bind 65536)
[17179574.584000] TCP reno registered
[17179574.584000] TCP bic registered
[17179574.584000] NET: Registered protocol family 1
[17179574.584000] NET: Registered protocol family 8
[17179574.584000] NET: Registered protocol family 20
[17179574.584000] Starting balanced_irq
[17179574.584000] Using IPI No-Shortcut mode
[17179574.584000] ACPI wakeup devices:
[17179574.584000] LID PBTN PCI0 USB0 USB1 USB2 USB3 EHCI CH31 AZAL PCIE RP01 PXP1 RP03 RP04 RP05 RP06
[17179574.584000] ACPI: (supports S0 S3 S4 S5)
[17179574.584000] Freeing unused kernel memory: 332k freed
[17179574.620000] vga16fb: initializing
[17179574.620000] vga16fb: mapped to 0xc00a0000
[17179574.836000] Console: switching to colour frame buffer device 80x25
[17179574.836000] fb0: VGA16 VGA frame buffer device
[17179575.860000] Capability LSM initialized
[17179575.936000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179575.936000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179575.936000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[17179575.936000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179575.940000] ACPI: Thermal Zone [THM] (52 C)
[17179576.284000] SCSI subsystem initialized
[17179576.284000] ACPI: bus type scsi registered
[17179576.284000] libata version 1.20 loaded.
[17179576.284000] ata_piix 0000:00:1f.2: version 1.05
[17179576.284000] ata_pci_init_one: pci_dev class+intf: 0x10180
[17179576.284000] ata_pci_init_one: NO_LEGACY == 0
[17179576.284000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177
[17179576.284000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179576.284000] ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
[17179576.448000] ata1: dev 0 cfg 00:045a 49:0f00 82:746b 83:7f69 84:4063 85:7469 86:3e49 87:4063 88:203f 93:0000
[17179576.448000] ata1: dev 0 ATA-7, max UDMA/100, 114270345 sectors: LBA48
[17179576.448000] ata_acpi_push_id: skipping for PATA mode
[17179576.448000] ata1: dev 0 configured for UDMA/100
[17179576.448000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179576.448000] pata_get_dev_handle: dev_handle: 0xdffe6320, parent_handle: 0xc1a2de40
[17179576.448000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff65200, *handle=0xdffe6320
[17179576.448000] do_drive_get_GTF: drive w/ adr=0: v: 0x00000000
[17179576.448000] scsi0 : ata_piix
[17179576.448000] Vendor: ATA Model: Hitachi HTS72106 Rev: MC3O
[17179576.448000] Type: Direct-Access ANSI SCSI revision: 05
[17179576.448000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179576.448000] pata_get_dev_handle: dev_handle: 0xdffe6320, parent_handle: 0xc1a2de40
[17179576.448000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff65200, *handle=0xdffe6320
[17179576.448000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
[17179576.816000] ata2: dev 0 cfg 00:85c0 49:0f00 82:4218 83:5000 84:4000 85:4218 86:1000 87:4000 88:0407 93:604d
[17179576.816000] ata2: dev 0 ATAPI, max UDMA/33
[17179576.816000] ata2(0): applying bridge limits
[17179576.816000] ata_acpi_push_id: skipping for PATA mode
[17179576.816000] ata2: dev 0 configured for UDMA/33
[17179576.816000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179576.816000] pata_get_dev_handle: dev_handle: 0xdffe6320, parent_handle: 0xc1a2de40
[17179576.816000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff65200, *handle=0xdffe6320
[17179576.816000] do_drive_get_GTF: drive w/ adr=0: v: 0x00000000
[17179576.816000] scsi1 : ata_piix
[17179576.824000] Vendor: TSSTcorp Model: DVD+-RW TS-L532B Rev: DE03
[17179576.824000] Type: CD-ROM ANSI SCSI revision: 05
[17179576.824000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179576.824000] pata_get_dev_handle: dev_handle: 0xdffe6320, parent_handle: 0xc1a2de40
[17179576.824000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff65200, *handle=0xdffe6320
[17179576.828000] Driver 'sd' needs updating - please use bus_type methods
[17179576.828000] SCSI device sda: 114270345 512-byte hdwr sectors (58506 MB)
[17179576.828000] SCSI device sda: drive cache: write back
[17179576.832000] SCSI device sda: 114270345 512-byte hdwr sectors (58506 MB)
[17179576.836000] SCSI device sda: drive cache: write back
[17179576.836000] sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[17179577.208000] sd 0:0:0:0: Attached scsi disk sda
[17179577.644000] usbcore: registered new driver usbfs
[17179577.644000] usbcore: registered new driver hub
[17179577.644000] USB Universal Host Controller Interface driver v2.3
[17179577.644000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 233
[17179577.644000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179577.644000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179577.644000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179577.644000] uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000bf80
[17179577.648000] hub 1-0:1.0: USB hub found
[17179577.648000] hub 1-0:1.0: 2 ports detected
[17179577.672000] ieee1394: Initialized config rom entry `ip1394'
[17179577.752000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 233
[17179577.752000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179577.752000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179577.752000] ehci_hcd 0000:00:1d.7: debug port 1
[17179577.752000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179577.752000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[17179577.752000] ehci_hcd 0000:00:1d.7: irq 233, io mem 0xffa80000
[17179577.756000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 50
[17179577.756000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179577.756000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179577.756000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[17179577.756000] uhci_hcd 0000:00:1d.1: irq 50, io base 0x0000bf60
[17179577.756000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.756000] hub 3-0:1.0: USB hub found
[17179577.756000] hub 3-0:1.0: 2 ports detected
[17179577.860000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 58
[17179577.860000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179577.860000] hub 2-0:1.0: USB hub found
[17179577.860000] hub 2-0:1.0: 8 ports detected
[17179577.860000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179577.964000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins at debian.org>
[17179577.964000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 185
[17179577.964000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[17179577.964000] uhci_hcd 0000:00:1d.2: irq 58, io base 0x0000bf40
[17179577.964000] hub 4-0:1.0: USB hub found
[17179577.964000] hub 4-0:1.0: 2 ports detected
[17179578.016000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[dcbfd800-dcbfdfff] Max Packet=[2048]
[17179578.068000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 66
[17179578.068000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179578.068000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179578.068000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[17179578.068000] uhci_hcd 0000:00:1d.3: irq 66, io base 0x0000bf20
[17179578.068000] hub 5-0:1.0: USB hub found
[17179578.068000] hub 5-0:1.0: 2 ports detected
[17179578.196000] ide0: I/O resource 0x1F0-0x1F7 not free.
[17179578.196000] ide0: ports already in use, skipping probe
[17179578.196000] ide1: I/O resource 0x170-0x177 not free.
[17179578.196000] ide1: ports already in use, skipping probe
[17179578.204000] usb 2-1: new high speed USB device using ehci_hcd and address 2
[17179578.220000] Attempting manual resume
[17179578.228000] ReiserFS: sda5: found reiserfs format "3.6" with standard journal
[17179578.336000] hub 2-1:1.0: USB hub found
[17179578.336000] hub 2-1:1.0: 4 ports detected
[17179578.680000] usb 2-5: new high speed USB device using ehci_hcd and address 3
[17179578.812000] hub 2-5:1.0: USB hub found
[17179578.812000] hub 2-5:1.0: 4 ports detected
[17179578.824000] ReiserFS: sda5: using ordered data mode
[17179578.840000] ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179578.840000] ReiserFS: sda5: checking transaction log (sda5)
[17179578.868000] ReiserFS: sda5: Using r5 hash to sort names
[17179579.248000] usb 2-5.2: new full speed USB device using ehci_hcd and address 4
[17179579.292000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[364fc0001c021050]
[17179579.540000] usb 2-5.4: new low speed USB device using ehci_hcd and address 5
[17179589.408000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179589.408000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[17179589.524000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[17179589.524000] Uniform CD-ROM driver Revision: 3.20
[17179589.524000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[17179590.112000] Linux agpgart interface v0.101 (c) Dave Jones
[17179590.148000] agpgart: Detected an Intel 945GM Chipset.
[17179590.164000] agpgart: AGP aperture is 256M @ 0x0
[17179590.212000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179590.280000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179590.420000] hw_random hardware driver 1.0.0 loaded
[17179590.468000] nvidia: module license 'NVIDIA' taints kernel.
[17179590.468000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179590.468000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[17179590.468000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8762 Mon May 15 13:06:38 PDT 2006
[17179590.528000] ieee80211_1_1_13_crypt: registered algorithm 'NULL'
[17179590.604000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 50
[17179590.604000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179590.620000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13
[17179590.620000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
[17179590.648000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3265
[17179590.648000] usbcore: registered new driver usblp
[17179590.648000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17179590.756000] ieee80211_crypt: registered algorithm 'NULL'
[17179590.768000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[17179590.768000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
[17179590.836000] input: PC Speaker as /class/input/input1
[17179590.856000] sdhci: Secure Digital Host Controller Interface driver, 0.10
[17179590.856000] sdhci: Copyright(c) Pierre Ossman
[17179590.948000] usbcore: registered new driver hiddev
[17179590.952000] input: Microsoft Microsoft Wireless Optical Desktop� 1.00 as /class/input/input2
[17179590.952000] input: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop� 1.00] on usb-0000:00:1d.7-5.4
[17179590.976000] input: Microsoft Microsoft Wireless Optical Desktop� 1.00 as /class/input/input3
[17179590.976000] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop� 1.00] on usb-0000:00:1d.7-5.4
[17179590.976000] usbcore: registered new driver usbhid
[17179590.976000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179590.988000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.0.5m
[17179590.988000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[17179591.012000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000
[17179591.012000] ts: Compaq touchscreen protocol output
[17179591.048000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[17179591.204000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 74
[17179591.204000] b44.c:v0.97 (Nov 30, 2005)
[17179591.204000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179591.208000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:14:22:ee:89:5c
[17179591.208000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179591.208000] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[17179591.240000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[17179591.252000] sdhci: ============== REGISTER DUMP ==============
[17179591.252000] sdhci: Sys addr: 0x00000000 | Version: 0x00000200
[17179591.252000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[17179591.252000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[17179591.252000] sdhci: Present: 0x01f20000 | Host ctl: 0x00000000
[17179591.252000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[17179591.252000] sdhci: Walk up: 0x00000000 | Clock: 0x00000000
[17179591.252000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
[17179591.252000] sdhci: Int enab: 0xe1ff00cf | Sig enab: 0xe1ff00cf
[17179591.252000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[17179591.252000] sdhci: Caps: 0x01e021a1 | Max curr: 0x00000040
[17179591.252000] sdhci: ===========================================
[17179591.300000] mmc0: SDHCI at 0xdcbfd400 irq 74 DMA
[17179592.212000] ipw3945: Radio Frequency Kill Switch is On:
[17179592.212000] Kill switch must be turned off for wireless networking to work.
[17179592.296000] lp: driver loaded but no devices found
[17179592.312000] sbp2: $Rev: 1306 $ Ben Collins <bcollins at debian.org>
[17179592.312000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179592.312000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179592.352000] Adding 979924k swap on /dev/sda6. Priority:-1 extents:1 across:979924k
[17179592.520000] NET: Registered protocol family 17
[17179594.128000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179594.128000] md: bitmap version 4.39
[17179594.440000] b44: eth0: Link is up at 100 Mbps, full duplex.
[17179594.440000] b44: eth0: Flow control is on for TX and on for RX.
[17179594.816000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
[17179595.792000] cdrom: open failed.
[17179600.356000] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[17179603.292000] ReiserFS: sda7: using ordered data mode
[17179603.336000] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179603.336000] ReiserFS: sda7: checking transaction log (sda7)
[17179603.424000] ReiserFS: sda7: Using r5 hash to sort names
[17179604.204000] NET: Registered protocol family 10
[17179604.204000] lo: Disabled Privacy Extensions
[17179604.204000] IPv6 over IPv4 tunneling driver
[17179606.268000] ACPI: AC Adapter [AC] (on-line)
[17179606.356000] pcc_acpi: loading...
[17179606.364000] ACPI: Lid Switch [LID]
[17179606.364000] ACPI: Power Button (CM) [PBTN]
[17179606.364000] ACPI: Sleep Button (CM) [SBTN]
[17179606.400000] ibm_acpi: ec object not found
[17179606.456000] ACPI: Battery Slot [BAT0] (battery present)
[17179606.488000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[17179606.488000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[17179606.488000] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[17179610.292000] ppdev: user-space parallel port driver
[17179611.624000] apm: BIOS not found.
[17179613.324000] Bluetooth: Core ver 2.8
[17179613.324000] NET: Registered protocol family 31
[17179613.324000] Bluetooth: HCI device and connection manager initialized
[17179613.324000] Bluetooth: HCI socket layer initialized
[17179613.380000] Bluetooth: L2CAP ver 2.8
[17179613.380000] Bluetooth: L2CAP socket layer initialized
[17179613.400000] Bluetooth: RFCOMM socket layer initialized
[17179613.400000] Bluetooth: RFCOMM TTY layer initialized
[17179613.400000] Bluetooth: RFCOMM ver 1.7
[17179623.808000] eth0: no IPv6 routers present
[17186450.932000] usb 3-1: new full speed USB device using uhci_hcd and address 2
[17186451.080000] input: Logitech Logitech USB Headset as /class/input/input5
[17186451.080000] input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.1-1
[17186451.432000] usbcore: registered new driver snd-usb-audio
[17186451.700000] usb 3-1: USB disconnect, address 2
[17186452.444000] usb 3-1: new full speed USB device using uhci_hcd and address 3
[17186452.660000] input: Logitech Logitech USB Headset as /class/input/input6
[17186452.660000] input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.1-1
[17188404.952000] usb 3-1: USB disconnect, address 3
[17188554.376000] usb 3-1: new full speed USB device using uhci_hcd and address 4
[17188554.592000] input: Logitech Logitech USB Headset as /class/input/input7
[17188554.592000] input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.1-1
--
Bluetooth not discovered on Dell Inspiron 9400
https://launchpad.net/bugs/37288
More information about the kernel-bugs
mailing list