[Bug 38760] Re: ata timeout with sony vgn-s580 laptop

[Christian Mayrhuber]

Same problem here on acer aspire 9412. Verified on 386 and 686 kernels.

General SATA/ATA information:
-----------------------------
[17179573.760000] ACPI: bus type scsi registered
[17179573.760000] libata version 1.20 loaded.
[17179573.764000] ata_piix 0000:00:1f.2: version 1.05
[17179573.764000] ata_pci_init_one: pci_dev class+intf: 0x10180
[17179573.764000] ata_pci_init_one: NO_LEGACY == 0
[17179573.764000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193
[17179573.764000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179573.764000] ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
[17179573.988000] ata1: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d09 84:6003 85:3469 86:3c09 87:6003 88:203f 93:407d
[17179573.988000] ata1: dev 0 ATA-6, max UDMA/100, 234441648 sectors: LBA48
[17179573.988000] ata1(0): applying bridge limits
[17179573.988000] ata_acpi_push_id: skipping for PATA mode
[17179574.168000] ata1: dev 1 cfg 00:85c0 49:0f00 82:0000 83:4000 84:4000 85:0000 86:0000 87:4000 88:0407 93:4101
[17179574.168000] ata1: dev 1 ATAPI, max UDMA/33
[17179574.168000] ata1(0): applying bridge limits
[17179574.168000] ata_acpi_push_id: skipping for PATA mode
[17179574.168000] ata1: dev 0 configured for UDMA/33
[17179574.168000] ata1: dev 1 configured for UDMA/33
[17179574.168000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179574.168000] pata_get_dev_handle: dev_handle: 0xdffe1e60, parent_handle: 0xdffe8840
[17179574.168000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff5d000, *handle=0xdffe1e60
[17179574.168000] do_drive_get_GTF:   drive w/ adr=0: v: 0xdffdf760
[17179574.168000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179574.168000] pata_get_dev_handle: dev_handle: 0xdffe1e60, parent_handle: 0xdffe8840
[17179574.168000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff5d000, *handle=0xdffe1e60
[17179574.168000] do_drive_get_GTF:   drive w/ adr=1: v: 0xdffdf700
[17179574.172000] scsi0 : ata_piix
[17179574.172000]   Vendor: ATA       Model: ST9120821A        Rev: 3.06
[17179574.172000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179574.172000]   Vendor: TSSTcorp  Model: CD/DVDW TS-L632D  Rev: ac00
[17179574.172000]   Type:   CD-ROM                             ANSI SCSI revision: 05
[17179574.176000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179574.176000] pata_get_dev_handle: dev_handle: 0xdffe1e60, parent_handle: 0xdffe8840
[17179574.176000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff5d000, *handle=0xdffe1e60
[17179574.176000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15
[17179575.628000] ata2: disabling port
[17179575.628000] scsi1 : ata_piix
[17179575.628000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179575.628000] pata_get_dev_handle: dev_handle: 0xdffe1e60, parent_handle: 0xdffe8840
[17179575.628000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff5d000, *handle=0xdffe1e60
[17179575.644000] Driver 'sd' needs updating - please use bus_type methods
[17179575.644000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[17179575.644000] SCSI device sda: drive cache: write back
[17179575.644000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[17179575.644000] SCSI device sda: drive cache: write back
[17179575.644000]  sda: sda1 sda2 sda3 sda4
[17179575.672000] sd 0:0:0:0: Attached scsi disk sda


After some while the system starts to freeze for 5 seconds and the following
error messages appear in the dmesg output:
--------------------------------------------------------------------------------
[17180468.228000] ata1 is slow to respond, please be patient
[17180473.184000] ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
[17180473.184000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17180473.184000] sr 0:0:1:0: ioctl_internal_command return code = 8000002
[17180473.184000]    : Current [descriptor]: sense key: Aborted Command
[17180473.184000]     Additional sense: Scsi parity error
[17180474.568000] ata1: status=0x50 { DriveReady SeekComplete }
[17180474.568000] sda: Current: sense key: No Sense
[17180474.568000]     Additional sense: No additional sense information
[17182349.300000] ata1 is slow to respond, please be patient
[17182354.256000] ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
[17182354.256000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17182354.256000] sr 0:0:1:0: ioctl_internal_command return code = 8000002
[17182354.256000]    : Current [descriptor]: sense key: Aborted Command
[17182354.256000]     Additional sense: Scsi parity error
[17182363.592000] ata1 is slow to respond, please be patient
[17182388.548000] ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x60
[17182388.548000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17182389.880000] ata1 failed to respond (30 secs)
[17182389.880000] ata1: status=0x50 { DriveReady SeekComplete }
[17182389.912000] sda: Current: sense key: No Sense
[17182389.912000]     Additional sense: No additional sense information
[17185522.772000] ata1 is slow to respond, please be patient
[17185547.728000] ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x60
[17185547.728000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17185547.728000] sr0: CDROM (ioctl) error, command: <6>Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 40
[17185547.728000] sr: Current [descriptor]: sense key: Aborted Command
[17185547.728000]     Additional sense: Scsi parity error
[17185549.076000] ata1 failed to respond (30 secs)
[17185549.108000] ata1: status=0x50 { DriveReady SeekComplete }
[17185549.108000] sda: Current: sense key: No Sense
[17185549.108000]     Additional sense: No additional sense information

Best Regards,
Christian

-- 
ata timeout with sony vgn-s580 laptop
https://launchpad.net/bugs/38760