[Bug 41385] Re: Broadcom wireless not working
gjbnh
garybyron at verizon.net
Sun Apr 30 23:38:43 UTC 2006
Sorry, I've been on vacation the past weekout of town. Here is the output you desire:
gary at gary-laptop:~$ dmesg
[4294667.296000] Linux version 2.6.15-21-386 (buildd at rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Fri Apr 21 16:43:33 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000001dee0000 (usable)
[4294667.296000] BIOS-e820: 000000001dee0000 - 000000001deec000 (ACPI data)
[4294667.296000] BIOS-e820: 000000001deec000 - 000000001df00000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000001df00000 - 0000000020000000 (reserved)
[4294667.296000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[4294667.296000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 478MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 122592
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 118496 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI present.
[4294667.296000] ACPI: RSDP (v000 HP ) @ 0x000f6560
[4294667.296000] ACPI: RSDT (v001 HP 3084 0x06040000 LTP 0x00000000) @ 0x1dee67e7
[4294667.296000] ACPI: FADT (v001 HP 3084 0x06040000 PTL 0x00000050) @ 0x1deebed2
[4294667.296000] ACPI: BOOT (v001 HP 3084 0x06040000 LTP 0x00000001) @ 0x1deebfd8
[4294667.296000] ACPI: DSDT (v001 HP 3084 0x06040000 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x1008
[4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda6 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (013c0000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 1298.952 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294669.510000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)[4294669.510000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294669.526000] Memory: 475828k/490368k available (1974k kernel code, 13936k reserved, 604k data, 288k init, 0k highmem)
[4294669.526000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294669.587000] Calibrating delay using timer specific routine.. 2599.14 BogoMIPS (lpj=1299572)
[4294669.587000] Security Framework v1.0.0 initialized
[4294669.587000] SELinux: Disabled at boot.
[4294669.587000] Mount-cache hash table entries: 512
[4294669.587000] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000000 00000000 00000000
[4294669.587000] CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000000 00000000 00000000
[4294669.587000] CPU: L1 I cache: 32K, L1 D cache: 32K
[4294669.587000] CPU: L2 cache: 512K
[4294669.587000] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 00000000 00000000 00000000
[4294669.587000] mtrr: v2.0 (20020519)
[4294669.587000] CPU: Intel(R) Celeron(R) M processor 1300MHz stepping 05
[4294669.587000] Enabling fast FPU save and restore... done.
[4294669.587000] Enabling unmasked SIMD FPU exception support... done.
[4294669.587000] Checking 'hlt' instruction... OK.
[4294669.591000] checking if image is initramfs... it is
[4294670.691000] Freeing initrd memory: 6395k freed
[4294670.699000] ACPI: Looking for DSDT ... not found!
[4294670.701000] ACPI: setting ELCR to 0200 (from 0c20)
[4294670.717000] NET: Registered protocol family 16
[4294670.717000] EISA bus registered
[4294670.717000] ACPI: bus type pci registered
[4294670.718000] PCI: PCI BIOS revision 2.10 entry at 0xfd9a2, last bus=2
[4294670.718000] PCI: Using configuration type 1
[4294670.718000] ACPI: Subsystem revision 20051216
[4294670.721000] ACPI: Interpreter enabled
[4294670.721000] ACPI: Using PIC for interrupt routing
[4294670.721000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294670.721000] PCI: Probing PCI hardware (bus 00)
[4294670.724000] Boot video device is 0000:00:02.0
[4294670.724000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[4294670.724000] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[4294670.724000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[4294670.724000] PCI: Transparent bridge - 0000:00:1e.0
[4294670.724000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.729000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[4294670.730000] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[4294670.730000] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[4294670.731000] ACPI: PCI Interrupt Link [LNKC] (IRQs *11)
[4294670.731000] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[4294670.731000] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
[4294670.731000] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
[4294670.732000] ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled.
[4294670.732000] ACPI: PCI Interrupt Link [LNKH] (IRQs *11)
[4294670.733000] ACPI: Embedded Controller [H_EC] (gpe 29) interrupt mode.
[4294670.738000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.738000] pnp: PnP ACPI init
[4294670.740000] pnp: PnP ACPI: found 7 devices
[4294670.740000] PnPBIOS: Disabled by ACPI PNP
[4294670.740000] PCI: Using ACPI for IRQ routing
[4294670.740000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294670.745000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[4294670.745000] PCI: Bus 3, cardbus bridge: 0000:02:05.0
[4294670.745000] IO window: 00003400-000034ff
[4294670.745000] IO window: 00003800-000038ff
[4294670.745000] PREFETCH window: 30000000-31ffffff
[4294670.745000] MEM window: 34000000-35ffffff
[4294670.745000] PCI: Bridge: 0000:00:1e.0
[4294670.745000] IO window: 3000-3fff
[4294670.745000] MEM window: e0200000-e02fffff
[4294670.745000] PREFETCH window: 30000000-31ffffff
[4294670.745000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294670.745000] **** SET: Misaligned resource pointer: dd93b5c2 Type 07 Len 0
[4294670.746000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[4294670.746000] PCI: setting IRQ 11 as level-triggered
[4294670.746000] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[4294670.746000] Simple Boot Flag at 0x36 set to 0x1
[4294670.746000] audit: initializing netlink socket (disabled)
[4294670.746000] audit(1146440027.745:1): initialized
[4294670.746000] VFS: Disk quotas dquot_6.5.1
[4294670.746000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.746000] Initializing Cryptographic API
[4294670.746000] io scheduler noop registered
[4294670.746000] io scheduler anticipatory registered
[4294670.746000] io scheduler deadline registered
[4294670.746000] io scheduler cfq registered
[4294670.747000] isapnp: Scanning for PnP cards...
[4294671.104000] isapnp: No Plug & Play device found
[4294671.122000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
[4294671.129000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294671.129000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.129000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294671.133000] **** SET: Misaligned resource pointer: ddc0a1c2 Type 07 Len 0
[4294671.133000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[4294671.133000] PCI: setting IRQ 5 as level-triggered
[4294671.133000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[4294671.133000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[4294671.133000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294671.134000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.134000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294671.134000] mice: PS/2 mouse device common for all mice
[4294671.135000] EISA: Probing bus 0 at eisa.0
[4294671.135000] Cannot allocate resource for EISA slot 1
[4294671.135000] Cannot allocate resource for EISA slot 2
[4294671.135000] Cannot allocate resource for EISA slot 3
[4294671.135000] EISA: Detected 0 cards.
[4294671.135000] NET: Registered protocol family 2
[4294671.145000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)[4294671.145000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.145000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.145000] TCP: Hash tables configured (established 16384 bind 16384)
[4294671.145000] TCP reno registered
[4294671.145000] TCP bic registered
[4294671.145000] NET: Registered protocol family 1
[4294671.145000] NET: Registered protocol family 8
[4294671.145000] NET: Registered protocol family 20
[4294671.145000] Using IPI Shortcut mode
[4294671.145000] ACPI wakeup devices:
[4294671.145000] BAT0 LAN PS2K PSM1 USB0 USB1 USB7
[4294671.145000] ACPI: (supports S0 S3 S4 S5)
[4294671.145000] Freeing unused kernel memory: 288k freed
[4294671.171000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294671.233000] vga16fb: initializing
[4294671.233000] vga16fb: mapped to 0xc00a0000
[4294671.358000] Console: switching to colour frame buffer device 80x25
[4294671.358000] fb0: VGA16 VGA frame buffer device
[4294672.483000] Capability LSM initialized
[4294672.520000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294672.522000] ACPI: Thermal Zone [THRM] (47 C)
[4294673.033000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[4294673.033000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[4294673.033000] **** SET: Misaligned resource pointer: ddc161c2 Type 07 Len 0
[4294673.033000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[4294673.033000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294673.033000] ICH4: chipset revision 3
[4294673.033000] ICH4: not 100% native mode: will probe irqs later
[4294673.033000] ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
[4294673.033000] ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio
[4294673.033000] Probing IDE interface ide0...
[4294673.297000] hda: TOSHIBA MK6025GAS, ATA DISK drive
[4294673.909000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.959000] Probing IDE interface ide1...
[4294674.631000] hdc: SD-R2512, ATAPI CD/DVD-ROM drive
[4294675.264000] ide1 at 0x170-0x177,0x376 on irq 15
[4294675.280000] hda: max request size: 128KiB
[4294675.290000] hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(100)
[4294675.290000] hda: cache flushes supported
[4294675.290000] hda: hda1 hda2 < hda5 hda6 >
[4294675.391000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA
[4294675.391000] Uniform CD-ROM driver Revision: 3.20
[4294675.691000] usbcore: registered new driver usbfs
[4294675.691000] usbcore: registered new driver hub
[4294675.693000] USB Universal Host Controller Interface driver v2.3
[4294675.694000] **** SET: Misaligned resource pointer: ddc62502 Type 07 Len 0
[4294675.694000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[4294675.694000] PCI: setting IRQ 10 as level-triggered
[4294675.694000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[4294675.694000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294675.694000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294675.695000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294675.695000] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001820
[4294675.695000] hub 1-0:1.0: USB hub found
[4294675.695000] hub 1-0:1.0: 2 ports detected
[4294675.796000] **** SET: Misaligned resource pointer: ddc62202 Type 07 Len 0
[4294675.796000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[4294675.796000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[4294675.796000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294675.796000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294675.796000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294675.796000] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
[4294675.796000] hub 2-0:1.0: USB hub found
[4294675.797000] hub 2-0:1.0: 2 ports detected
[4294675.898000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294675.898000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294675.898000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294675.898000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294675.898000] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
[4294675.898000] hub 3-0:1.0: USB hub found
[4294675.898000] hub 3-0:1.0: 2 ports detected
[4294676.001000] **** SET: Misaligned resource pointer: ddaaeac2 Type 07 Len 0
[4294676.001000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[4294676.001000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[4294676.001000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294676.001000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294676.001000] ehci_hcd 0000:00:1d.7: debug port 1
[4294676.001000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4294676.001000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[4294676.001000] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xe0100000
[4294676.002000] usb 1-1: new full speed USB device using uhci_hcd and address 2[4294676.005000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294676.005000] hub 4-0:1.0: USB hub found
[4294676.005000] hub 4-0:1.0: 6 ports detected
[4294676.283000] EXT3-fs: mounted filesystem with ordered data mode.
[4294676.298000] kjournald starting. Commit interval 5 seconds
[4294676.522000] usb 4-2: new high speed USB device using ehci_hcd and address 3[4294676.636000] hub 4-2:1.0: USB hub found
[4294676.636000] hub 4-2:1.0: 4 ports detected
[4294676.944000] usb 1-1: new full speed USB device using uhci_hcd and address 3[4294677.245000] usb 4-2.3: new low speed USB device using ehci_hcd and address 4
[4294688.220000] Linux agpgart interface v0.101 (c) Dave Jones
[4294688.222000] agpgart: Detected an Intel 855 Chipset.
[4294688.222000] agpgart: Detected 32636K stolen memory.
[4294688.230000] agpgart: AGP aperture is 128M @ 0xe8000000
[4294688.415000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294688.421000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294688.458000] hw_random hardware driver 1.0.0 loaded
[4294688.577000] Real Time Clock Driver v1.12
[4294689.315000] ieee80211_crypt: registered algorithm 'NULL'
[4294689.318000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[4294689.318000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
[4294689.541000] usbcore: registered new driver usbserial
[4294689.542000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[4294689.543000] usbcore: registered new driver usbserial_generic
[4294689.543000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[4294689.565000] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[4294689.565000] Yenta: CardBus bridge found at 0000:02:05.0 [103c:3084]
[4294689.565000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294689.565000] Yenta: Routing CardBus interrupts to PCI
[4294689.565000] Yenta TI: socket 0000:02:05.0, mfunc 0x01111112, devctl 0x64
[4294689.693000] drivers/usb/serial/usb-serial.c: USB Serial support registered for PocketPC PDA
[4294689.693000] drivers/usb/serial/ipaq.c: USB PocketPC PDA driver v0.5
[4294689.694000] ipaq 1-1:1.0: PocketPC PDA converter detected
[4294689.696000] usb 1-1: PocketPC PDA converter now attached to ttyUSB0
[4294689.696000] usbcore: registered new driver ipaq
[4294689.712000] bcm43xx: driver
[4294689.738000] 8139too Fast Ethernet driver 0.9.27
[4294689.738000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[4294689.738000] eth0: RealTek RTL8139 at 0xde97c000, 00:c0:9f:50:21:0c, IRQ 10
[4294689.738000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[4294689.758000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
[4294689.759000] usbcore: registered new driver hiddev
[4294689.761000] input: USBPS2 as /class/input/input1
[4294689.761000] input: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.7-2.3
[4294689.765000] input: USBPS2 as /class/input/input2
[4294689.766000] input: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.7-2.3
[4294689.766000] usbcore: registered new driver usbhid
[4294689.766000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294689.792000] Yenta: ISA IRQ mask 0x00d8, PCI irq 11
[4294689.792000] Socket status: 30000006
[4294689.792000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[4294689.792000] cs: IO port probe 0x3000-0x3fff: clean.
[4294689.792000] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
[4294689.792000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
[4294689.793000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[4294689.850000] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294690.294000] ts: Compaq touchscreen protocol output
[4294690.306000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294690.489000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[4294690.489000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294690.664000] cs: IO port probe 0x100-0x3af: clean.
[4294690.666000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[4294690.666000] cs: IO port probe 0x820-0x8ff: clean.
[4294690.667000] cs: IO port probe 0xc00-0xcf7: clean.
[4294690.668000] cs: IO port probe 0xa00-0xaff: clean.
[4294690.796000] intel8x0_measure_ac97_clock: measured 50251 usecs
[4294690.796000] intel8x0: clocking to 48000
[4294692.138000] Adding 265028k swap on /dev/hda5. Priority:-1 extents:1 across:265028k
[4294692.233000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[4294693.357000] NET: Registered protocol family 17
[4294693.357000] EXT3 FS on hda6, internal journal
[4294693.917000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294693.917000] md: bitmap version 4.39
[4294694.353000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
[4294695.067000] cdrom: open failed.
[4294695.443000] NET: Registered protocol family 10
[4294695.444000] lo: Disabled Privacy Extensions
[4294695.444000] IPv6 over IPv4 tunneling driver
[4294695.567000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[4294695.622000] NTFS volume version 3.1.
[4294696.901000] ACPI: AC Adapter [ACAD] (on-line)
[4294696.930000] ACPI: Battery Slot [BAT0] (battery present)
[4294697.018000] ACPI: Power Button (FF) [PWRF]
[4294697.018000] ACPI: Lid Switch [LID0]
[4294697.018000] ACPI: Power Button (CM) [PWRB]
[4294697.132000] ibm_acpi: ec object not found
[4294697.157000] pcc_acpi: loading...
[4294697.262000] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)[4294702.639000] [drm] Initialized drm 1.0.0 20040925
[4294702.643000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[4294702.643000] [drm] Initialized i915 1.1.0 20040405 on minor 0:
[4294702.644000] [drm] Initialized i915 1.1.0 20040405 on minor 1:
[4294702.644000] mtrr: base(0xe8020000) is not aligned on a size(0x300000) boundary
[4294705.077000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294705.077000] apm: overridden by ACPI.
[4294705.625000] eth0: no IPv6 routers present
[4294708.267000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294708.267000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294708.267000] ide: failed opcode was: 0xec
[4294708.383000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294708.383000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294708.383000] ide: failed opcode was: 0xec
[4294708.750000] Bluetooth: Core ver 2.8
[4294708.750000] NET: Registered protocol family 31
[4294708.750000] Bluetooth: HCI device and connection manager initialized
[4294708.750000] Bluetooth: HCI socket layer initialized
[4294708.859000] Bluetooth: L2CAP ver 2.8
[4294708.859000] Bluetooth: L2CAP socket layer initialized
[4294708.864000] Bluetooth: RFCOMM socket layer initialized
[4294708.864000] Bluetooth: RFCOMM TTY layer initialized
[4294708.864000] Bluetooth: RFCOMM ver 1.7
gary at gary-laptop:~$
--
Broadcom wireless not working
https://launchpad.net/bugs/41385
More information about the kernel-bugs
mailing list